mfd: Rename twl4030* driver files to enable re-use

The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030
for OMAP3. The common modules like RTC, Regulator creates opportunity
to re-use the most of the code from twl4030.

This patch renames few common drivers twl4030* files to twl* to enable
the code re-use.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

arch/arm/mach-omap2/board-2430sdp.c

@@ -19,7 +19,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>

arch/arm/mach-omap2/board-3430sdp.c

@@ -20,7 +20,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
 #include <linux/gpio.h>

arch/arm/mach-omap2/board-ldp.c

@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 

arch/arm/mach-omap2/board-omap3beagle.c

@@ -29,7 +29,7 @@
 #include <linux/mtd/nand.h>
 
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>

arch/arm/mach-omap2/board-omap3pandora.c

@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-overo.c

@@ -26,7 +26,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>

drivers/gpio/twl4030-gpio.c

@@ -34,7 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*

drivers/input/keyboard/twl4030_keypad.c

@@ -31,7 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*

drivers/input/misc/twl4030-pwrbutton.c

@@ -27,7 +27,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #define PWR_PWRON_IRQ (1 << 0)
 

drivers/mfd/Makefile

@@ -26,7 +26,7 @@ obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
-obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o
 obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
 

drivers/mfd/twl4030-core.c → drivers/mfd/twl-core.c

@@ -36,7 +36,7 @@
 #include <linux/regulator/machine.h>
 
 #include <linux/i2c.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #include <plat/cpu.h>

drivers/mfd/twl4030-irq.c

@@ -32,7 +32,7 @@
 #include <linux/irq.h>
 #include <linux/kthread.h>
 
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*

drivers/mfd/twl4030-power.c

@@ -26,7 +26,7 @@
 
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>

drivers/regulator/Makefile

@@ -11,7 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o

drivers/regulator/twl4030-regulator.c → drivers/regulator/twl-regulator.c

@@ -15,7 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*

drivers/rtc/Makefile

@@ -80,7 +80,7 @@ obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
 obj-$(CONFIG_RTC_DRV_STMP)	+= rtc-stmp3xxx.o
 obj-$(CONFIG_RTC_DRV_SUN4V)	+= rtc-sun4v.o
 obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
-obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl4030.o
+obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl.o
 obj-$(CONFIG_RTC_DRV_TX4939)	+= rtc-tx4939.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o

drivers/rtc/rtc-twl4030.c → drivers/rtc/rtc-twl.c

@@ -28,7 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*

drivers/usb/otg/twl4030-usb.c

@@ -33,7 +33,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 

drivers/video/omap/lcd_2430sdp.c

@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <plat/mux.h>
 #include <asm/mach-types.h>

drivers/watchdog/twl4030_wdt.c

@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #define TWL4030_WATCHDOG_CFG_REG_OFFS	0x3
 

sound/soc/codecs/twl4030.c

@@ -26,7 +26,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>