Skip to content

L
linux
Commit b19e6271 authored by Jens Axboe's avatar Jens Axboe
Browse files
Options

ide configure updates

parent 0e771bcc
Hide whitespace changes
Inline Side-by-side
Showing with 65 additions and 32 deletions
drivers/ide/Config.in
View file @ b19e6271
......@@ -9,6 +9,8 @@ comment 'IDE, ATA and ATAPI Block devices'
dep_tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE $CONFIG_IDE
comment 'Please see Documentation/ide.txt for help/info on IDE drives'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE $CONFIG_X86
define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_IDE
dep_tristate ' Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
dep_mbool ' Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE $CONFIG_BLK_DEV_IDEDISK
......@@ -27,12 +29,13 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_tristate ' PCMCIA IDE support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA
dep_tristate ' Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE
dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
dep_mbool ' Reduce media failure retries support' CONFIG_BLK_DEV_IDECD_BAILOUT $CONFIG_BLK_DEV_IDECD
#dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
bool ' IDE Taskfile Access' CONFIG_IDE_TASK_IOCTL
# bool ' IDE Taskfile IO' CONFIG_IDE_TASKFILE_IO
#bool ' IDE Taskfile IO' CONFIG_IDE_TASKFILE_IO
comment 'IDE chipset support/bugfixes'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
......@@ -40,9 +43,9 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then
dep_bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
define_bool CONFIG_BLK_DEV_IDEPCI y
bool ' Generic PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then
dep_bool ' Orphan Chipset Support' CONFIG_BLK_DEV_GENERIC $CONFIG_BLK_DEV_IDEPCI
bool ' Sharing PCI IDE interrupts support' CONFIG_IDEPCI_SHARE_IRQ
bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI
bool ' Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD
......@@ -51,16 +54,17 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' Attempt to HACK around Chipsets that TIMEOUT (WIP)' CONFIG_BLK_DEV_IDEDMA_TIMEOUT $CONFIG_IDEDMA_PCI_WIP
dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
# dep_bool ' Asynchronous DMA support (WIP) (EXPERIMENTAL)' CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDEDMA_PCI_WIP $CONFIG_EXPERIMENTAL
define_bool CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI
# dep_bool ' Tag Command Queue DMA support (WIP) (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDMA_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDEDMA_PCI_WIP $CONFIG_EXPERIMENTAL
dep_bool ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
dep_bool ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
dep_bool ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AMD Viper ATA-66 Override (WIP)' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDEDMA_PCI_WIP
dep_bool ' CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' CMD680 chipset tuning support' CONFIG_BLK_DEV_CMD680 $CONFIG_BLK_DEV_CMD64X
dep_mbool ' AMD Viper ATA-66 Override' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX
dep_bool ' CMD64{3|6|8|9} chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
......@@ -68,26 +72,27 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' HPT366/368/370 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
fi
dep_bool ' NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' nVidia NFORCE support' CONFIG_BLK_DEV_NFORCE $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' NS87415 chipset support' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
dep_bool ' Pacific Digital ADMA100 basic support' CONFIG_BLK_DEV_ADMA100 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' PROMISE PDC202{46|62|65|67|68|69|70} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
# dep_bool ' Pacific Digital ADMA100 basic support' CONFIG_BLK_DEV_ADMA100 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' PROMISE PDC202{46|62|65|67} support' CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD $CONFI_BLK_DEV_IDEDMA_PCI
dep_bool ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
dep_bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
dep_bool ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Silicon Image chipset support' CONFIG_BLK_DEV_SIIMAGE $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Tekram TRM290 chipset support' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
bool ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105
dep_bool ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEPCI
fi
fi
fi
......@@ -139,20 +144,22 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
EXT_DIRECT CONFIG_IDE_EXT_DIRECT" 8xx_PCCARD
fi
bool ' Other IDE chipset support' CONFIG_IDE_CHIPSETS
# no isa -> no vlb
dep_bool ' Other IDE chipset support' CONFIG_IDE_CHIPSETS $CONFIG_ISA
if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then
comment 'Note: most of these also require special kernel boot parameters'
bool ' Generic 4 drives/port support' CONFIG_BLK_DEV_4DRIVES
bool ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX
bool ' DTC-2278 support' CONFIG_BLK_DEV_DTC2278
bool ' Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B
if [ "$CONFIG_BLK_DEV_IDEDISK" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
bool ' PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030
fi
bool ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX
bool ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672
dep_tristate ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX $CONFIG_BLK_DEV_IDE
dep_tristate ' DTC-2278 support' CONFIG_BLK_DEV_DTC2278 $CONFIG_BLK_DEV_IDE
dep_tristate ' Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B $CONFIG_BLK_DEV_IDE
dep_tristate ' PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030 $CONFIG_BLK_DEV_IDEDISK $CONFIG_EXPERIMENTAL
dep_tristate ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX $CONFIG_BLK_DEV_IDE
dep_tristate ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672 $CONFIG_BLK_DEV_IDE
fi
fi
else
bool 'Old hard disk (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY
define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_ONLY
fi
if [ "$CONFIG_IDEDMA_PCI_AUTO" = "y" -o \
......@@ -175,7 +182,26 @@ else
define_bool CONFIG_DMA_NONPCI n
fi
if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" ]; then
if [ "$CONFIG_BLK_DEV_PDC202XX_OLD" != "n" -o \
"$CONFIG_BLK_DEV_PDC202XX_NEW" != "n" ]; then
define_bool CONFIG_BLK_DEV_PDC202XX y
fi
fi
##if [ "$CONFIG_IDE_TASKFILE_IO" = "y" ]; then
## dep_mbool CONFIG_BLK_DEV_TF_DISK $CONFIG_BLK_DEV_IDEDISK
##else
## dep_mbool CONFIG_BLK_DEV_NTF_DISK $CONFIG_BLK_DEV_IDEDISK
##fi
if [ "$CONFIG_BLK_DEV_4DRIVES" = "y" -o \
"$CONFIG_BLK_DEV_ALI14XX" != "n" -o \
"$CONFIG_BLK_DEV_DTC2278" != "n" -o \
"$CONFIG_BLK_DEV_HT6560B" != "n" -o \
"$CONFIG_BLK_DEV_PDC4030" != "n" -o \
"$CONFIG_BLK_DEV_QD65XX" != "n" -o \
"$CONFIG_BLK_DEV_UMC8672" != "n" -o \
"$CONFIG_BLK_DEV_AEC62XX" = "y" -o \
"$CONFIG_BLK_DEV_ALI15X3" = "y" -o \
"$CONFIG_BLK_DEV_AMD74XX" = "y" -o \
......@@ -186,19 +212,26 @@ if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
"$CONFIG_BLK_DEV_HPT34X" = "y" -o \
"$CONFIG_BLK_DEV_HPT366" = "y" -o \
"$CONFIG_BLK_DEV_IDE_PMAC" = "y" -o \
"$CONFIG_BLK_DEV_IT8172" = "y" -o \
"$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" -o \
"$CONFIG_BLK_DEV_NFORCE" = "y" -o \
"$CONFIG_BLK_DEV_OPTI621" = "y" -o \
"$CONFIG_BLK_DEV_SVWKS" = "y" -o \
"$CONFIG_BLK_DEV_PDC202XX" = "y" -o \
"$CONFIG_BLK_DEV_PIIX" = "y" -o \
"$CONFIG_BLK_DEV_IT8172" = "y" -o \
"$CONFIG_BLK_DEV_SVWKS" = "y" -o \
"$CONFIG_BLK_DEV_SIIMAGE" = "y" -o \
"$CONFIG_BLK_DEV_SIS5513" = "y" -o \
"$CONFIG_BLK_DEV_SLC90E66" = "y" -o \
"$CONFIG_BLK_DEV_SL82C105" = "y" -o \
"$CONFIG_BLK_DEV_VIA82CXXX" = "y" -o \
"$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then
"$CONFIG_BLK_DEV_SLC90E66" = "y" -o \
"$CONFIG_BLK_DEV_VIA82CXXX" = "y" ]; then
define_bool CONFIG_BLK_DEV_IDE_MODES y
else
define_bool CONFIG_BLK_DEV_IDE_MODES n
fi
#dep_tristate 'Support for IDE Raid controllers (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL
#dep_tristate ' Support Promise software RAID (Fasttrak(tm)) (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
#dep_tristate ' Highpoint 370 software RAID (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
endmenu
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7