bnx2x: mask CPL_OF interrupt

Unmasked interrupt caused "FATAL HW block attention set2 0x20" messages
to erroneously appear, as the associated interrupt is fully recoverable.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -6059,6 +6059,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 
 static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
 {
+	u32 val;
+
 	REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
 	if (!CHIP_IS_E1x(bp))
 		REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40);
@@ -6092,17 +6094,14 @@ static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
 /*	REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
 /*	REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
 
-	if (CHIP_REV_IS_FPGA(bp))
-		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x580000);
-	else if (!CHIP_IS_E1x(bp))
-		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0,
-			   (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF
-				| PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT
-				| PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN
-				| PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED
-				| PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED));
-	else
-		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x480000);
+	val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT  |
+		PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
+		PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN;
+	if (!CHIP_IS_E1x(bp))
+		val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
+			PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED;
+	REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val);
+
 	REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0);
 	REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0);
 	REG_WR(bp, TCM_REG_TCM_INT_MASK, 0);