Commit b3ee526a authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: dsa: sja1105: Use correct dsa_8021q VIDs for FDB commands

A FDB entry means that "frames that match this VID and DMAC must be
forwarded to this port".

In the case of dsa_8021q however, the VID is not a single one (and
neither two, as my previous patch assumed). The VID can be set either by
the CPU port (1 tx_vid), or by any of the other front-panel port (n-1
rx_vid's).

Fixes: 93647594 ("net: dsa: sja1105: Hide the dsa_8021q VLANs from the bridge fdb command")
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 17ae6555
......@@ -1126,44 +1126,60 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct sja1105_private *priv = ds->priv;
int rc;
u16 rx_vid, tx_vid;
int rc, i;
if (dsa_port_is_vlan_filtering(&ds->ports[port]))
return priv->info->fdb_add_cmd(ds, port, addr, vid);
/* Since we make use of VLANs even when the bridge core doesn't tell us
* to, translate these FDB entries into the correct dsa_8021q ones.
* The basic idea (also repeats for removal below) is:
* - Each of the other front-panel ports needs to be able to forward a
* pvid-tagged (aka tagged with their rx_vid) frame that matches this
* DMAC.
* - The CPU port (aka the tx_vid of this port) needs to be able to
* send a frame matching this DMAC to the specified port.
* For a better picture see net/dsa/tag_8021q.c.
*/
if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
unsigned int upstream = dsa_upstream_port(priv->ds, port);
u16 tx_vid = dsa_8021q_tx_vid(ds, port);
u16 rx_vid = dsa_8021q_rx_vid(ds, port);
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
if (i == port)
continue;
if (i == dsa_upstream_port(priv->ds, port))
continue;
rc = priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
rx_vid = dsa_8021q_rx_vid(ds, i);
rc = priv->info->fdb_add_cmd(ds, port, addr, rx_vid);
if (rc < 0)
return rc;
return priv->info->fdb_add_cmd(ds, upstream, addr, rx_vid);
}
return priv->info->fdb_add_cmd(ds, port, addr, vid);
tx_vid = dsa_8021q_tx_vid(ds, port);
return priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
}
static int sja1105_fdb_del(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct sja1105_private *priv = ds->priv;
int rc;
u16 rx_vid, tx_vid;
int rc, i;
/* Since we make use of VLANs even when the bridge core doesn't tell us
* to, translate these FDB entries into the correct dsa_8021q ones.
*/
if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
unsigned int upstream = dsa_upstream_port(priv->ds, port);
u16 tx_vid = dsa_8021q_tx_vid(ds, port);
u16 rx_vid = dsa_8021q_rx_vid(ds, port);
if (dsa_port_is_vlan_filtering(&ds->ports[port]))
return priv->info->fdb_del_cmd(ds, port, addr, vid);
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
if (i == port)
continue;
if (i == dsa_upstream_port(priv->ds, port))
continue;
rc = priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
rx_vid = dsa_8021q_rx_vid(ds, i);
rc = priv->info->fdb_del_cmd(ds, port, addr, rx_vid);
if (rc < 0)
return rc;
return priv->info->fdb_del_cmd(ds, upstream, addr, rx_vid);
}
return priv->info->fdb_del_cmd(ds, port, addr, vid);
tx_vid = dsa_8021q_tx_vid(ds, port);
return priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
}
static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
......@@ -1171,8 +1187,12 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
{
struct sja1105_private *priv = ds->priv;
struct device *dev = ds->dev;
u16 rx_vid, tx_vid;
int i;
rx_vid = dsa_8021q_rx_vid(ds, port);
tx_vid = dsa_8021q_tx_vid(ds, port);
for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) {
struct sja1105_l2_lookup_entry l2_lookup = {0};
u8 macaddr[ETH_ALEN];
......@@ -1198,14 +1218,24 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
continue;
u64_to_ether_addr(l2_lookup.macaddr, macaddr);
/* We need to hide the dsa_8021q VLAN from the user.
* Convert the TX VID into the pvid that is active in
* standalone and non-vlan_filtering modes, aka 1.
* The RX VID is applied on the CPU port, which is not seen by
* the bridge core anyway, so there's nothing to hide.
/* We need to hide the dsa_8021q VLANs from the user. This
* basically means hiding the duplicates and only showing
* the pvid that is supposed to be active in standalone and
* non-vlan_filtering modes (aka 1).
* - For statically added FDB entries (bridge fdb add), we
* can convert the TX VID (coming from the CPU port) into the
* pvid and ignore the RX VIDs of the other ports.
* - For dynamically learned FDB entries, a single entry with
* no duplicates is learned - that which has the real port's
* pvid, aka RX VID.
*/
if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
if (l2_lookup.vlanid == tx_vid ||
l2_lookup.vlanid == rx_vid)
l2_lookup.vlanid = 1;
else
continue;
}
cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment