Commit b4b31a7c authored by Zhangfei Gao's avatar Zhangfei Gao Committed by Wei Xu

arm64: dts: Add hi6220 usb node

Add USB nodes for Hi6220
Signed-off-by: default avatarZhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
parent 0c231751
...@@ -615,5 +615,37 @@ i2c2: i2c@f7102000 { ...@@ -615,5 +615,37 @@ i2c2: i2c@f7102000 {
pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
status = "disabled"; status = "disabled";
}; };
fixed_5v_hub: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed_5v_hub";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
gpio = <&gpio0 7 0>;
regulator-always-on;
};
usb_phy: usbphy {
compatible = "hisilicon,hi6220-usb-phy";
#phy-cells = <0>;
phy-supply = <&fixed_5v_hub>;
hisilicon,peripheral-syscon = <&sys_ctrl>;
};
usb: usb@f72c0000 {
compatible = "hisilicon,hi6220-usb";
reg = <0x0 0xf72c0000 0x0 0x40000>;
phys = <&usb_phy>;
phy-names = "usb2-phy";
clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
clock-names = "otg";
dr_mode = "otg";
g-use-dma;
g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 128 128 128 128>;
interrupts = <0 77 0x4>;
};
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment