Commit b4c9f578 authored by Jingoo Han's avatar Jingoo Han Committed by Felipe Balbi

usb: dwc3: exynos: remove non-DT support for Exynos Specific Glue layer

DWC3 Exynos Specific Glue layer can be used only for Exynos SoCs.
In addition, non-DT for EXYNOS SoCs is not supported from v3.11;
thus, there is no need to support non-DT for DWC3 Exynos Specific
Glue layer.

The 'linux/platform_data/dwc3-exynos.h' file has been used for
non-DT support. Thus, the 'dwc3-exynos.h' file is removed, because
it is not used anymore.
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent cdeb7943
...@@ -55,7 +55,7 @@ config USB_DWC3_OMAP ...@@ -55,7 +55,7 @@ config USB_DWC3_OMAP
config USB_DWC3_EXYNOS config USB_DWC3_EXYNOS
tristate "Samsung Exynos Platform" tristate "Samsung Exynos Platform"
depends on ARCH_EXYNOS || COMPILE_TEST depends on ARCH_EXYNOS && OF || COMPILE_TEST
default USB_DWC3 default USB_DWC3
help help
Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside, Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
......
...@@ -20,7 +20,6 @@ ...@@ -20,7 +20,6 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/platform_data/dwc3-exynos.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/usb/otg.h> #include <linux/usb/otg.h>
...@@ -205,13 +204,11 @@ static int dwc3_exynos_remove(struct platform_device *pdev) ...@@ -205,13 +204,11 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
return 0; return 0;
} }
#ifdef CONFIG_OF
static const struct of_device_id exynos_dwc3_match[] = { static const struct of_device_id exynos_dwc3_match[] = {
{ .compatible = "samsung,exynos5250-dwusb3" }, { .compatible = "samsung,exynos5250-dwusb3" },
{}, {},
}; };
MODULE_DEVICE_TABLE(of, exynos_dwc3_match); MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
#endif
#ifdef CONFIG_PM_SLEEP #ifdef CONFIG_PM_SLEEP
static int dwc3_exynos_suspend(struct device *dev) static int dwc3_exynos_suspend(struct device *dev)
...@@ -266,7 +263,7 @@ static struct platform_driver dwc3_exynos_driver = { ...@@ -266,7 +263,7 @@ static struct platform_driver dwc3_exynos_driver = {
.remove = dwc3_exynos_remove, .remove = dwc3_exynos_remove,
.driver = { .driver = {
.name = "exynos-dwc3", .name = "exynos-dwc3",
.of_match_table = of_match_ptr(exynos_dwc3_match), .of_match_table = exynos_dwc3_match,
.pm = DEV_PM_OPS, .pm = DEV_PM_OPS,
}, },
}; };
......
/**
* dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _DWC3_EXYNOS_H_
#define _DWC3_EXYNOS_H_
struct dwc3_exynos_data {
int phy_type;
int (*phy_init)(struct platform_device *pdev, int type);
int (*phy_exit)(struct platform_device *pdev, int type);
};
#endif /* _DWC3_EXYNOS_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment