[PATCH] new kernel configuration 3/7

This adds the arch config files. (part 1)

arch/arm/mach-arc/Kconfig

+
+menu "Archimedes/A5000 Implementations"
+
+# These architectures will be combined.  However, until this
+# is complete...  Note that the ARC will take precedence over
+# A5K
+comment "Archimedes/A5000 Implementations (select only ONE)"
+
+config ARCH_ARC
+	bool "Archimedes"
+	depends on ARCH_ARCA5K
+	help
+	  The Acorn Archimedes was an personal computer based on an 8K ARM2
+	  processor, released in 1987.  It supported 512K of RAM and 2 800K
+	  floppy disks.  Picture and more detailed specifications at
+	  <http://www.computingmuseum.com/museum/archi.htm>.
+
+config ARCH_A5K
+	bool "A5000"
+	depends on ARCH_ARCA5K
+	help
+	  Say Y here to to support the Acorn A5000.  Linux can support the
+	  internal IDE disk and CD-ROM interface, serial and parallel port,
+	  and the floppy drive.  Note that on some A5000s the floppy is
+	  plugged into the wrong socket on the motherboard.
+
+config PAGESIZE_16
+	bool "2MB physical memory"
+	depends on ARCH_ARCA5K
+	help
+	  Say Y here if your Archimedes or A5000 system has only 2MB of
+	  memory, otherwise say N.  The resulting kernel will not run on a
+	  machine with 4MB of memory.
+
+endmenu
+

arch/arm/mach-clps711x/Kconfig

+
+menu "CLPS711X/EP721X Implementations"
+
+config ARCH_AUTCPU12
+	bool "AUTCPU12"
+	depends on ARCH_CLPS711X
+	help
+	  Say Y if you intend to run the kernel on the autronix autcpu12
+	  board. This board is based on a Cirrus Logic CS89712.
+
+config ARCH_CDB89712
+	bool "CDB89712"
+	depends on ARCH_CLPS711X
+	help
+	  This is an evaluation board from Cirrus for the CS89712 processor.
+	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
+	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
+
+config ARCH_CEIVA
+	bool "CEIVA"
+	depends on ARCH_CLPS711X
+	help
+	  Say Y here if you intend to run this kernel on the Ceiva/Polaroid
+	  PhotoMax Digital Picture Frame.
+
+config ARCH_CLEP7312
+	bool "CLEP7312"
+	depends on ARCH_CLPS711X
+
+config ARCH_EDB7211
+	bool "EDB7211"
+	depends on ARCH_CLPS711X
+	help
+	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
+	  evaluation board.
+
+config ARCH_P720T
+	bool "P720T"
+	depends on ARCH_CLPS711X
+	help
+	  Say Y here if you intend to run this kernel on the ARM Prospector
+	  720T.
+
+config ARCH_FORTUNET
+	bool "FORTUNET"
+	depends on ARCH_CLPS711X
+
+# XXX Maybe these should indicate register compatibility
+# instead of being mutually exclusive.
+config ARCH_EP7211
+	bool
+	depends on ARCH_EDB7211
+	default y
+
+config ARCH_EP7212
+	bool
+	depends on ARCH_P720T || ARCH_CEIVA
+	default y
+
+config EP72XX_ROM_BOOT
+	bool "EP72xx ROM boot"
+	depends on ARCH_EP7211 || ARCH_EP7212
+	---help---
+	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
+	  mode memory map instead of the normal memory map.
+
+	  Processors derived from the Cirrus CLPS-711X core support two boot
+	  modes.  Normal mode boots from the external memory device at CS0.
+	  Bootstrap mode rearranges parts of the memory map, placing an
+	  internal 128 byte bootstrap ROM at CS0.  This option performs the
+	  address map changes required to support booting in this mode.
+
+	  You almost surely want to say N here.
+
+endmenu
+

arch/arm/mach-epxa10db/Kconfig

+
+menu "Epxa10db"
+
+comment "PLD hotswap support"
+	depends on ARCH_CAMELOT
+
+config PLD
+	bool
+	depends on ARCH_CAMELOT
+	default y
+
+config PLD_HOTSWAP
+	bool "Support for PLD device hotplugging (experimental)"
+	depends on ARCH_CAMELOT && EXPERIMENTAL
+	help
+	  This enables support for the dynamic loading and configuration of
+	  compatible drivers when the contents of the PLD are changed. This
+	  is still experimental and requires configuration tools which are
+	  not yet generally available. Say N here. You must enable the kernel
+	  module loader for this feature to work.
+
+endmenu
+

arch/arm/mach-footbridge/Kconfig

+
+menu "Footbridge Implementations"
+
+config ARCH_CATS
+	bool "CATS"
+	depends on ARCH_FOOTBRIDGE
+	help
+	  Say Y here if you intend to run this kernel on the CATS.
+
+	  Saying N will reduce the size of the Footbridge kernel.
+
+config ARCH_PERSONAL_SERVER
+	bool "Compaq Personal Server"
+	depends on ARCH_FOOTBRIDGE
+	---help---
+	  Say Y here if you intend to run this kernel on the Compaq
+	  Personal Server.
+
+	  Saying N will reduce the size of the Footbridge kernel.
+
+	  The Compaq Personal Server is not available for purchase.
+	  There are no product plans beyond the current research
+	  prototypes at this time.  Information is available at:
+
+	  <http://crl.research.compaq.com/projects/personalserver/>
+
+	  If you have any questions or comments about the  Compaq Personal
+	  Server, send e-mail to skiff@crl.dec.com.
+
+config ARCH_EBSA285_ADDIN
+	bool "EBSA285 (addin mode)"
+	depends on ARCH_FOOTBRIDGE
+	help
+	  Say Y here if you intend to run this kernel on the EBSA285 card
+	  in addin mode.
+
+	  Saying N will reduce the size of the Footbridge kernel.
+
+config ARCH_EBSA285_HOST
+	bool "EBSA285 (host mode)"
+	depends on ARCH_FOOTBRIDGE
+	help
+	  Say Y here if you intend to run this kernel on the EBSA285 card
+	  in host ("central function") mode.
+
+	  Saying N will reduce the size of the Footbridge kernel.
+
+config ARCH_NETWINDER
+	bool "NetWinder"
+	depends on ARCH_FOOTBRIDGE
+	help
+	  Say Y here if you intend to run this kernel on the Rebel.COM
+	  NetWinder.  Information about this machine can be found at:
+
+	  <http://www.netwinder.org/>
+
+	  Saying N will reduce the size of the Footbridge kernel.
+
+endmenu
+

arch/arm/mach-iop310/Kconfig

+
+menu "IOP310 Implementation Options"
+
+config ARCH_IQ80310
+	bool "IQ80310"
+	depends on ARCH_IOP310
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80310
+	  evaluation kit for the IOP310 chipset.
+
+comment "IOP310 Chipset Features"
+
+config IOP310_AAU
+	bool "Support Intel 80312 Application Accelerator Unit (EXPERIMENTAL)"
+	depends on ARCH_IOP310 && EXPERIMENTAL
+
+config IOP310_DMA
+	bool "Support Intel 80312 DMA (EXPERIMENTAL)"
+	depends on ARCH_IOP310 && EXPERIMENTAL
+
+config IOP310_MU
+	bool "Support Intel 80312 Messaging Unit (EXPERIMENTAL)"
+	depends on ARCH_IOP310 && EXPERIMENTAL
+
+config IOP310_PMON
+	bool "Support Intel 80312 Performance Monitor (EXPERIMENTAL)"
+	depends on ARCH_IOP310 && EXPERIMENTAL
+
+endmenu
+

arch/arm/mach-pxa/Kconfig

+
+menu "Intel PXA250/210 Implementations"
+
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform"
+	depends on ARCH_PXA
+
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	depends on ARCH_PXA
+
+endmenu
+

arch/arm/mach-sa1100/Kconfig

+
+menu "SA11x0 Implementations"
+
+config SA1100_ASSABET
+	bool "Assabet"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
+	  Microprocessor Development Board (also known as the Assabet).
+
+config ASSABET_NEPONSET
+	bool "Include support for Neponset"
+	depends on SA1100_ASSABET
+	help
+	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
+	  Microprocessor Development Board (Assabet)  with the SA-1111
+	  Development Board (Nepon).
+
+config SA1100_ADSBITSY
+	bool "ADS Bitsy"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using Applied Data Systems Intel(R)
+	  StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
+	  like platform. See
+	  <http://www.applieddata.net/products_bitsySpec.asp> for more
+	  information.
+
+config SA1100_BRUTUS
+	bool "Brutus"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
+	  Microprocessor Development Board (also known as the Brutus).
+
+config SA1100_CERF
+	bool "CerfBoard"
+	depends on ARCH_SA1100
+	help
+	  The Intrinsyc CerfBoard is based on the StrongARM 1110.
+	  More information is available at:
+	  <http://www.intrinsyc.com/products/referenceplatforms/cerfboard.html>.
+
+	  Say Y if configuring for an Intrinsyc CerfBoard.
+	  Say N otherwise.
+
+choice
+	prompt "Cerf Flash available"
+	depends on SA1100_CERF
+	default SA1100_CERF_FLASH_8MB
+
+config SA1100_CERF_FLASH_8MB
+	bool "8MB"
+
+config SA1100_CERF_FLASH_16MB
+	bool "16MB"
+
+config SA1100_CERF_FLASH_32MB
+	bool "32MB"
+
+endchoice
+
+config SA1100_CERF_CPLD
+	bool "Cerf w/CPLD support (CerfPDA)"
+	depends on SA1100_CERF
+	help
+	  Say Y here to support the Linux CerfPDA development kit from
+	  Intrinsyc. This is a StrongARM-1110-based reference platform for
+	  designing custom PDAs.  Product info is at
+	  <http://www.intrinsyc.com/products/referencedesigns/cerfpda.asp>.
+
+config SA1100_H3100
+	bool "Compaq iPAQ H3100"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you intend to run this kernel on the Compaq iPAQ
+	  H3100 handheld computer.  Information about this machine and the
+	  Linux port to this machine can be found at:
+
+	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+	  <http://www.compaq.com/products/handhelds/pocketpc/>
+
+config SA1100_H3600
+	bool "Compaq iPAQ H3600/H3700"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you intend to run this kernel on the Compaq iPAQ
+	  H3600 handheld computer.  Information about this machine and the
+	  Linux port to this machine can be found at:
+
+	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+	  <http://www.compaq.com/products/handhelds/pocketpc/>
+
+config SA1100_H3800
+	bool "Compaq iPAQ H3800"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
+	  series handheld computer.  Information about this machine and the
+	  Linux port to this machine can be found at:
+
+	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
+	  <http://www.compaq.com/products/handhelds/pocketpc/>
+
+config SA1100_H3XXX
+	bool
+	depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
+	default y
+
+#dep_bool '  Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100
+#dep_bool '  Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
+config SA1100_EXTENEX1
+	bool "Extenex HandHeld Theater (Squashtail)"
+	depends on ARCH_SA1100
+
+config SA1100_EXTENEX1_16MB
+	bool "Support 16 MB of DRAM (not just 8)"
+	depends on SA1100_EXTENEX1
+
+config SA1100_FLEXANET
+	bool "FlexaNet"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you intend to run this kernel on the FlexaNet
+	  handheld instruments. Information about this machine can be
+	  found at: <http://www.flexanet.com/>.
+
+config SA1100_FREEBIRD
+	bool "FreeBird-v1.1"
+	depends on ARCH_SA1100
+	help
+	  Support the FreeBird board used in Coventive embedded products.  See
+	  Documentation/arm/SA1100/Freebird for more.
+
+config SA1100_GRAPHICSCLIENT
+	bool "GraphicsClient Plus"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using an Applied Data Systems Intel(R)
+	  StrongARM(R) SA-1100 based Graphics Client SBC.  See
+	  <http://www.flatpanels.com/> for information on this system.
+
+config SA1100_GRAPHICSMASTER
+	bool "GraphicsMaster"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using an Applied Data Systems Intel(R)
+	  StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
+	  StrongARM companion chip.  See
+	  <http://www.applieddata.net/products_masterSpec.asp> for information
+	  on this system.
+
+config SA1100_BADGE4
+	bool "HP Labs BadgePAD 4"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you want to build a kernel for the HP Laboratories
+	  BadgePAD 4.
+
+config SA1100_JORNADA720
+	bool "HP Jornada 720"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you want to build a kernel for the HP Jornada 720
+	  handheld computer.  See <http://www.hp.com/jornada/products/720>
+	  for details.
+
+config SA1100_HUW_WEBPANEL
+	bool "HuW WebPanel"
+	depends on ARCH_SA1100
+	help
+	  Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
+	  AG.  English-language website is at
+	  <http://www.hoeft-wessel.de/en.htm>; credits and build instructions
+	  at Documentation/arm/SA1100/HUW_WEBPANEL.
+
+config SA1100_ITSY
+	bool "Itsy"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using the Compaq Itsy experimental pocket
+	  computer. See <http://research.compaq.com/wrl/projects/itsy/> for
+	  more information.
+
+config SA1100_LART
+	bool "LART"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using the Linux Advanced Radio Terminal
+	  (also known as the LART).  See <http://www.lart.tudelft.nl/> for
+	  information on the LART.
+
+config SA1100_NANOENGINE
+	bool "nanoEngine"
+	depends on ARCH_SA1100
+	help
+	  The nanoEngine is a StrongARM 1110-based single board computer
+	  from Bright Star Engineering. More information is available at:
+	  <http://www.brightstareng.com/arm/nanoeng.htm>.
+
+	  Say Y if configuring for a nanoEngine.
+	  Say N otherwise.
+
+config SA1100_OMNIMETER
+	bool "OmniMeter"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using the inhand electronics OmniMeter.  See
+	  <http://www.inhandelectronics.com/html/omni1.html> for details.
+
+config SA1100_PANGOLIN
+	bool "Pangolin"
+	depends on ARCH_SA1100
+	help
+	  Pangolin is a StrongARM 1110-based evaluation platform produced
+	  by Dialogue Technology.  It has EISA slots for ease of configuration
+	  with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
+	  card, and TFT-LCD card.
+
+	  Say Y if configuring for a Pangolin.
+	  Say N otherwise.
+
+config SA1100_PLEB
+	bool "PLEB"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using a Portable Linux Embedded Board
+	  (also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
+	  for more information.
+
+config SA1100_PT_SYSTEM3
+	bool "PT System 3"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you intend to build a kernel suitable to run on
+	  a Pruftechnik Digital Board. For more information see
+	  <http://www.pruftechnik.com>
+
+config SA1100_SHANNON
+	bool "Shannon"
+	depends on ARCH_SA1100
+	help
+	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
+	  limited edition webphone produced by Philips. The Shannon is a SA1100
+	  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
+	  and a telco interface.
+
+config SA1100_SHERMAN
+	bool "Sherman"
+	depends on ARCH_SA1100
+	help
+	  Say Y here to support the Blazie Engineering `Sherman' StrongARM
+	  1110-based SBC, used primarily in assistance products for the
+	  visually impaired.  The company is now Freedom Scientific, with
+	  a website at <http://www.freedomscientific.com/index.html>. The
+	  Sherman product, however, appears to have been discontinued.
+
+config SA1100_SIMPAD
+	bool "Simpad"
+	depends on ARCH_SA1100
+	help
+	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
+	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
+	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
+	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
+	  like CL4 in additional it has a PCMCIA-Slot. For more information
+	  visit <http://www.my-siemens.com or www.siemens.ch>.
+
+config SA1100_PFS168
+	bool "Tulsa"
+	depends on ARCH_SA1100
+	help
+	  The Radisys Corp. PFS-168 (aka Tulsa) is an Intel® StrongArm® SA-1110 based
+	  computer which includes the SA-1111 Microprocessor Companion Chip and other
+	  custom I/O designed to add connectivity and multimedia features for vending
+	  and business machine applications. Say Y here if you require support for
+	  this target.
+
+config SA1100_VICTOR
+	bool "Victor"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
+	  SA-1100 based Victor Digital Talking Book Reader.  See
+	  <http://www.visuaide.com/pagevictor.en.html> for information on
+	  this system.
+
+config SA1100_XP860
+	bool "XP860"
+	depends on ARCH_SA1100
+	help
+	  :: Config help missing ::
+	  :: 06 August 2002 ::
+
+config SA1100_YOPY
+	bool "Yopy"
+	depends on ARCH_SA1100
+	help
+	  Say Y here to support the Yopy PDA.  Product information at
+	  <http://www.yopy.com/>.  See Documentation/arm/SA110/Yopy
+	  for more.
+
+config SA1100_STORK
+	bool "Stork"
+	depends on ARCH_SA1100
+	help
+	  Say Y here if you intend to run this kernel on the Stork
+	  handheld computer.
+
+config SA1100_USB
+	tristate "SA1100 USB function support"
+	depends on ARCH_SA1100
+
+config SA1100_USB_NETLINK
+	tristate "Support for SA11x0 USB network link function"
+	depends on SA1100_USB
+
+config SA1100_USB_CHAR
+	tristate "Support for SA11x0 USB character device emulation"
+	depends on SA1100_USB
+
+config H3600_SLEEVE
+	tristate "Compaq iPAQ Handheld sleeve support"
+	depends on SA1100_H3600
+	help
+	  Choose this option to enable support for extension packs (sleeves)
+	  for the Compaq iPAQ H3XXX series of handheld computers.  This option
+	  is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
+	  packs.
+
+endmenu
+

arch/i386/oprofile/Kconfig

+
+menu "Profiling support"
+	depends on EXPERIMENTAL
+
+config PROFILING
+	bool "Profiling support (EXPERIMENTAL)"
+	help
+	  Say Y here to enable the extended profiling support mechanisms used
+	  by profilers such as OProfile.
+	  
+
+config OPROFILE
+	tristate "OProfile system profiling (EXPERIMENTAL)"
+	depends on PROFILING
+	help
+	  OProfile is a profiling system capable of profiling the
+	  whole system, include the kernel, kernel modules, libraries,
+	  and applications.
+
+	  If unsure, say N.
+
+endmenu
+

arch/ia64/hp/sim/Kconfig

+
+menu "HP Simulator drivers"
+	depends on IA64_HP_SIM || IA64_GENERIC
+
+config HP_SIMETH
+	bool "Simulated Ethernet "
+
+config HP_SIMSERIAL
+	bool "Simulated serial driver support"
+
+config HP_SIMSCSI
+	bool "Simulated SCSI disk"
+	depends on SCSI
+
+endmenu
+