Skip to content

L
linux
Commit b57cb723 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 

Pull m68knommu arch updates from Greg Ungerer:
 "Includes a cleanup of the non-MMU linker script (it now almost
  exclusively uses the well defined linker script support macros and
  definitions).  Some more merging of MMU and non-MMU common files
  (specifically the arch process.c, ptrace and time.c).  And a big
  cleanup of the massively duplicated ColdFire device definition code.

  Overall we remove about 2000 lines of code, and end up with a single
  set of platform device definitions for the serial ports, ethernet
  ports and QSPI ports common in most ColdFire SoCs.

  I expect you will get a merge conflict on arch/m68k/kernel/process.c,
  in cpu_idle().  It should be relatively strait forward to fixup."

And cpu_idle() conflict resolution was indeed trivial (merging the
nommu/mmu versions of process.c trivially conflicting with the
conversion to use the schedule_preempt_disabled() helper function)

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (57 commits)
  m68knommu: factor more common ColdFire cpu reset code
  m68knommu: make 528x CPU reset register addressing consistent
  m68knommu: make 527x CPU reset register addressing consistent
  m68knommu: make 523x CPU reset register addressing consistent
  m68knommu: factor some common ColdFire cpu reset code
  m68knommu: move old ColdFire timers init from CPU init to timers code
  m68knommu: clean up init code in ColdFire 532x startup
  m68knommu: clean up init code in ColdFire 528x startup
  m68knommu: clean up init code in ColdFire 523x startup
  m68knommu: merge common ColdFire QSPI platform setup code
  m68knommu: make 532x QSPI platform addressing consistent
  m68knommu: make 528x QSPI platform addressing consistent
  m68knommu: make 527x QSPI platform addressing consistent
  m68knommu: make 5249 QSPI platform addressing consistent
  m68knommu: make 523x QSPI platform addressing consistent
  m68knommu: make 520x QSPI platform addressing consistent
  m68knommu: merge common ColdFire FEC platform setup code
  m68knommu: make 532x FEC platform addressing consistent
  m68knommu: make 528x FEC platform addressing consistent
  m68knommu: make 527x FEC platform addressing consistent
  ...
parents ad12ab25 ae909ea4
Hide whitespace changes
Inline Side-by-side
Showing with 1591 additions and 3637 deletions
arch/m68k/Kconfig
View file @ b57cb723
...@@ -7,6 +7,7 @@ config M68K ...@@ -7,6 +7,7 @@ config M68K
select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES select GENERIC_CPU_DEVICES
select FPU if MMU
config RWSEM_GENERIC_SPINLOCK config RWSEM_GENERIC_SPINLOCK
bool bool
...@@ -24,9 +25,6 @@ config ARCH_HAS_ILOG2_U64 ...@@ -24,9 +25,6 @@ config ARCH_HAS_ILOG2_U64
config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS
bool bool
config GENERIC_CMOS_UPDATE
def_bool !MMU
config GENERIC_GPIO config GENERIC_GPIO
bool bool
...@@ -67,6 +65,9 @@ config CPU_HAS_NO_MULDIV64 ...@@ -67,6 +65,9 @@ config CPU_HAS_NO_MULDIV64
config CPU_HAS_ADDRESS_SPACES config CPU_HAS_ADDRESS_SPACES
bool bool
config FPU
bool
config HZ config HZ
int int
default 1000 if CLEOPATRA default 1000 if CLEOPATRA
......
arch/m68k/include/asm/m5206sim.h
View file @ b57cb723
...@@ -100,11 +100,11 @@ ...@@ -100,11 +100,11 @@
#define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */ #define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */
#if defined(CONFIG_NETtel) #if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#else #else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */
#endif #endif
/* /*
...@@ -112,6 +112,8 @@ ...@@ -112,6 +112,8 @@
*/ */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/* /*
* Generic GPIO * Generic GPIO
......
arch/m68k/include/asm/m520xsim.h
View file @ b57cb723
...@@ -48,8 +48,21 @@ ...@@ -48,8 +48,21 @@
#define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 36 /* Interrupt number for FEC RX */
#define MCFINT_FECTX0 40 /* Interrupt number for FEC RX */
#define MCFINT_FECENTC0 42 /* Interrupt number for FEC RX */
#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -144,15 +157,25 @@ ...@@ -144,15 +157,25 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ #define MCFUART_BASE0 0xFC060000 /* Base address of UART0 */
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ #define MCFUART_BASE1 0xFC064000 /* Base address of UART1 */
#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */ #define MCFUART_BASE2 0xFC068000 /* Base address of UART2 */
/* /*
* FEC module. * FEC module.
*/ */
#define MCFFEC_BASE 0xFC030000 /* Base of FEC ethernet */ #define MCFFEC_BASE0 0xFC030000 /* Base of FEC ethernet */
#define MCFFEC_SIZE 0x800 /* Register set size */ #define MCFFEC_SIZE0 0x800 /* Register set size */
/*
* QSPI module.
*/
#define MCFQSPI_BASE 0xFC05C000 /* Base of QSPI module */
#define MCFQSPI_SIZE 0x40 /* Register set size */
#define MCFQSPI_CS0 46
#define MCFQSPI_CS1 47
#define MCFQSPI_CS2 27
/* /*
* Reset Control Unit. * Reset Control Unit.
......
arch/m68k/include/asm/m523xsim.h
View file @ b57cb723
...@@ -35,8 +35,23 @@ ...@@ -35,8 +35,23 @@
#define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ #define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
...@@ -50,8 +65,8 @@ ...@@ -50,8 +65,8 @@
/* /*
* Reset Control Unit (relative to IPSBAR). * Reset Control Unit (relative to IPSBAR).
*/ */
#define MCF_RCR 0x110000 #define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR 0x110001 #define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
...@@ -59,15 +74,26 @@ ...@@ -59,15 +74,26 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) #define MCFUART_BASE0 (MCF_IPSBAR + 0x200)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) #define MCFUART_BASE1 (MCF_IPSBAR + 0x240)
#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) #define MCFUART_BASE2 (MCF_IPSBAR + 0x280)
/* /*
* FEC ethernet module. * FEC ethernet module.
*/ */
#define MCFFEC_BASE (MCF_IPSBAR + 0x1000) #define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000)
#define MCFFEC_SIZE 0x800 #define MCFFEC_SIZE0 0x800
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 103
#define MCFQSPI_CS3 99
/* /*
* GPIO module. * GPIO module.
......
arch/m68k/include/asm/m5249sim.h
View file @ b57cb723
...@@ -76,8 +76,19 @@ ...@@ -76,8 +76,19 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */
#define MCFQSPI_SIZE 0x40 /* Register set size */
#define MCFQSPI_CS0 29
#define MCFQSPI_CS1 24
#define MCFQSPI_CS2 21
#define MCFQSPI_CS3 22
/* /*
* DMA unit base addresses. * DMA unit base addresses.
...@@ -108,6 +119,9 @@ ...@@ -108,6 +119,9 @@
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/* /*
* General purpose IO registers (in MBAR2). * General purpose IO registers (in MBAR2).
*/ */
......
arch/m68k/include/asm/m5272sim.h
View file @ b57cb723
...@@ -68,8 +68,8 @@ ...@@ -68,8 +68,8 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
#define MCFUART_BASE1 0x100 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
...@@ -88,6 +88,9 @@ ...@@ -88,6 +88,9 @@
#define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */ #define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */
#define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */ #define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */
#define MCFFEC_BASE0 (MCF_MBAR + 0x840) /* Base FEC ethernet */
#define MCFFEC_SIZE0 0x1d0
/* /*
* Define system peripheral IRQ usage. * Define system peripheral IRQ usage.
*/ */
...@@ -101,8 +104,8 @@ ...@@ -101,8 +104,8 @@
#define MCF_IRQ_TIMER2 70 /* Timer 2 */ #define MCF_IRQ_TIMER2 70 /* Timer 2 */
#define MCF_IRQ_TIMER3 71 /* Timer 3 */ #define MCF_IRQ_TIMER3 71 /* Timer 3 */
#define MCF_IRQ_TIMER4 72 /* Timer 4 */ #define MCF_IRQ_TIMER4 72 /* Timer 4 */
#define MCF_IRQ_UART1 73 /* UART 1 */ #define MCF_IRQ_UART0 73 /* UART 0 */
#define MCF_IRQ_UART2 74 /* UART 2 */ #define MCF_IRQ_UART1 74 /* UART 1 */
#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */
#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */ #define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */
#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */ #define MCF_IRQ_USB0 77 /* USB Endpoint 0 */
...@@ -114,9 +117,9 @@ ...@@ -114,9 +117,9 @@
#define MCF_IRQ_USB6 83 /* USB Endpoint 6 */ #define MCF_IRQ_USB6 83 /* USB Endpoint 6 */
#define MCF_IRQ_USB7 84 /* USB Endpoint 7 */ #define MCF_IRQ_USB7 84 /* USB Endpoint 7 */
#define MCF_IRQ_DMA 85 /* DMA Controller */ #define MCF_IRQ_DMA 85 /* DMA Controller */
#define MCF_IRQ_ERX 86 /* Ethernet Receiver */ #define MCF_IRQ_FECRX0 86 /* Ethernet Receiver */
#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */ #define MCF_IRQ_FECTX0 87 /* Ethernet Transmitter */
#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */ #define MCF_IRQ_FECENTC0 88 /* Ethernet Non-Time Critical */
#define MCF_IRQ_QSPI 89 /* Queued Serial Interface */ #define MCF_IRQ_QSPI 89 /* Queued Serial Interface */
#define MCF_IRQ_EINT5 90 /* External Interrupt 5 */ #define MCF_IRQ_EINT5 90 /* External Interrupt 5 */
#define MCF_IRQ_EINT6 91 /* External Interrupt 6 */ #define MCF_IRQ_EINT6 91 /* External Interrupt 6 */
......
arch/m68k/include/asm/m527xsim.h
View file @ b57cb723
...@@ -38,8 +38,29 @@ ...@@ -38,8 +38,29 @@
#define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC0 */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCFINT2_VECBASE 128 /* Vector base number 2 */
#define MCFINT2_FECRX1 23 /* Interrupt number for FEC1 */
#define MCFINT2_FECTX1 27 /* Interrupt number for FEC1 */
#define MCFINT2_FECENTC1 29 /* Interrupt number for FEC1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_FECRX1 (MCFINT2_VECBASE + MCFINT2_FECRX1)
#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1)
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -72,9 +93,9 @@ ...@@ -72,9 +93,9 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) #define MCFUART_BASE0 (MCF_IPSBAR + 0x200)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) #define MCFUART_BASE1 (MCF_IPSBAR + 0x240)
#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) #define MCFUART_BASE2 (MCF_IPSBAR + 0x280)
/* /*
* FEC ethernet module. * FEC ethernet module.
...@@ -84,6 +105,28 @@ ...@@ -84,6 +105,28 @@
#define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800) #define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800)
#define MCFFEC_SIZE1 0x800 #define MCFFEC_SIZE1 0x800
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#ifdef CONFIG_M5271
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#endif
#ifdef CONFIG_M5275
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
/*
* GPIO module.
*/
#ifdef CONFIG_M5271 #ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
...@@ -285,8 +328,8 @@ ...@@ -285,8 +328,8 @@
/* /*
* Reset Control Unit (relative to IPSBAR). * Reset Control Unit (relative to IPSBAR).
*/ */
#define MCF_RCR 0x110000 #define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR 0x110001 #define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
......
arch/m68k/include/asm/m528xsim.h
View file @ b57cb723
...@@ -35,9 +35,24 @@ ...@@ -35,9 +35,24 @@
#define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */
#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -58,15 +73,26 @@ ...@@ -58,15 +73,26 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000200) #define MCFUART_BASE0 (MCF_IPSBAR + 0x00000200)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000240) #define MCFUART_BASE1 (MCF_IPSBAR + 0x00000240)
#define MCFUART_BASE3 (MCF_IPSBAR + 0x00000280) #define MCFUART_BASE2 (MCF_IPSBAR + 0x00000280)
/* /*
* FEC ethernet module. * FEC ethernet module.
*/ */
#define MCFFEC_BASE (MCF_IPSBAR + 0x00001000) #define MCFFEC_BASE0 (MCF_IPSBAR + 0x00001000)
#define MCFFEC_SIZE 0x800 #define MCFFEC_SIZE0 0x800
/*
* QSPI module.
*/
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#define MCFQSPI_CS0 147
#define MCFQSPI_CS1 148
#define MCFQSPI_CS2 149
#define MCFQSPI_CS3 150
/* /*
* GPIO registers * GPIO registers
...@@ -246,8 +272,8 @@ ...@@ -246,8 +272,8 @@
/* /*
* Reset Control Unit (relative to IPSBAR). * Reset Control Unit (relative to IPSBAR).
*/ */
#define MCF_RCR 0x110000 #define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR 0x110001 #define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
......
arch/m68k/include/asm/m5307sim.h
View file @ b57cb723
...@@ -117,11 +117,11 @@ ...@@ -117,11 +117,11 @@
* UART module. * UART module.
*/ */
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x200) /* Base address UART0 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x1c0) /* Base address UART1 */
#else #else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
#endif #endif
/* /*
...@@ -176,6 +176,8 @@ ...@@ -176,6 +176,8 @@
*/ */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/****************************************************************************/ /****************************************************************************/
#endif /* m5307sim_h */ #endif /* m5307sim_h */
arch/m68k/include/asm/m532xsim.h
View file @ b57cb723
...@@ -24,6 +24,19 @@ ...@@ -24,6 +24,19 @@
#define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 36 /* Interrupt number for FEC */
#define MCFINT_FECTX0 40 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 42 /* Interrupt number for FEC */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_WTM_WCR MCF_REG16(0xFC098000) #define MCF_WTM_WCR MCF_REG16(0xFC098000)
...@@ -82,9 +95,25 @@ ...@@ -82,9 +95,25 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ #define MCFUART_BASE0 0xFC060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ #define MCFUART_BASE1 0xFC064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */ #define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */
/*
* FEC module.
*/
#define MCFFEC_BASE0 0xFC030000 /* Base address of FEC0 */
#define MCFFEC_SIZE0 0x800 /* Size of FEC0 region */
/*
* QSPI module.
*/
#define MCFQSPI_BASE 0xFC058000 /* Base address of QSPI */
#define MCFQSPI_SIZE 0x40 /* Size of QSPI region */
#define MCFQSPI_CS0 84
#define MCFQSPI_CS1 85
#define MCFQSPI_CS2 86
/* /*
* Timer module. * Timer module.
......
arch/m68k/include/asm/m5407sim.h
View file @ b57cb723
...@@ -85,8 +85,8 @@ ...@@ -85,8 +85,8 @@
#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */
#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
#define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248) #define MCFSIM_PADAT (MCF_MBAR + 0x248)
...@@ -139,6 +139,8 @@ ...@@ -139,6 +139,8 @@
*/ */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/****************************************************************************/ /****************************************************************************/
#endif /* m5407sim_h */ #endif /* m5407sim_h */
arch/m68k/include/asm/m54xxsim.h
View file @ b57cb723
...@@ -31,16 +31,20 @@ ...@@ -31,16 +31,20 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */
#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */
#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ #define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */
#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ #define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */
/* /*
* Define system peripheral IRQ usage. * Define system peripheral IRQ usage.
*/ */
#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ #define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */
#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */ #define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33)
#define MCF_IRQ_UART3 (MCFINT_VECBASE + 32)
/* /*
* Generic GPIO support * Generic GPIO support
......
arch/m68k/include/asm/machdep.h
View file @ b57cb723
...@@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void); ...@@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void);
extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_clock_mmss)(unsigned long); extern int (*mach_set_clock_mmss)(unsigned long);
extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
int *min, int *sec);
extern void (*mach_reset)( void ); extern void (*mach_reset)( void );
extern void (*mach_halt)( void ); extern void (*mach_halt)( void );
extern void (*mach_power_off)( void ); extern void (*mach_power_off)( void );
...@@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int); ...@@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int);
extern void (*mach_beep) (unsigned int, unsigned int); extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */ /* Hardware clock functions */
extern void hw_timer_init(void); extern void hw_timer_init(irq_handler_t handler);
extern unsigned long hw_timer_offset(void); extern unsigned long hw_timer_offset(void);
extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
extern void config_BSP(char *command, int len); extern void config_BSP(char *command, int len);
......
arch/m68k/include/asm/mcfqspi.h
View file @ b57cb723
...@@ -21,17 +21,6 @@ ...@@ -21,17 +21,6 @@
#ifndef mcfqspi_h #ifndef mcfqspi_h
#define mcfqspi_h #define mcfqspi_h
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#elif defined(CONFIG_M5249)
#define MCFQSPI_IOBASE (MCF_MBAR + 0x300)
#elif defined(CONFIG_M520x)
#define MCFQSPI_IOBASE 0xFC05C000
#elif defined(CONFIG_M532x)
#define MCFQSPI_IOBASE 0xFC058000
#endif
#define MCFQSPI_IOSIZE 0x40
/** /**
* struct mcfqspi_cs_control - chip select control for the coldfire qspi driver * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
* @setup: setup the control; allocate gpio's, etc. May be NULL. * @setup: setup the control; allocate gpio's, etc. May be NULL.
......
arch/m68k/include/asm/mcfuart.h
View file @ b57cb723
...@@ -41,7 +41,10 @@ struct mcf_platform_uart { ...@@ -41,7 +41,10 @@ struct mcf_platform_uart {
#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#else #endif
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5249) || defined(CONFIG_M5307) || \
defined(CONFIG_M5407)
#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
#endif #endif
#define MCFUART_UIPR 0x34 /* Input Port (r) */ #define MCFUART_UIPR 0x34 /* Input Port (r) */
......
arch/m68k/kernel/process.c
View file @ b57cb723
/*
* linux/arch/m68k/kernel/process.c
*
* Copyright (C) 1995 Hamish Macdonald
*
* 68060 fixes by Jesper Skov
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/reboot.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
asmlinkage void ret_from_fork(void);
/*
* Return saved PC from a blocked thread
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
/* Check whether the thread is blocked in resume() */
if (in_sched_functions(sw->retpc))
return ((unsigned long *)sw->a6)[1];
else
return sw->retpc;
}
/*
* The idle loop on an m68k..
*/
static void default_idle(void)
{
if (!need_resched())
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari (falcon) */
__asm__("stop #0x2200" : : : "cc");
#else
__asm__("stop #0x2000" : : : "cc");
#endif
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched())
idle();
schedule_preempt_disabled();
}
}
void machine_restart(char * __unused)
{
if (mach_reset)
mach_reset();
for (;;);
}
void machine_halt(void)
{
if (mach_halt)
mach_halt();
for (;;);
}
void machine_power_off(void)
{
if (mach_power_off)
mach_power_off();
for (;;);
}
void (*pm_power_off)(void) = machine_power_off;
EXPORT_SYMBOL(pm_power_off);
void show_regs(struct pt_regs * regs)
{
printk("\n");
printk("Format %02x Vector: %04x PC: %08lx Status: %04x %s\n",
regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
printk("ORIG_D0: %08lx D0: %08lx A2: %08lx A1: %08lx\n",
regs->orig_d0, regs->d0, regs->a2, regs->a1);
printk("A0: %08lx D5: %08lx D4: %08lx\n",
regs->a0, regs->d5, regs->d4);
printk("D3: %08lx D2: %08lx D1: %08lx\n",
regs->d3, regs->d2, regs->d1);
if (!(regs->sr & PS_S))
printk("USP: %08lx\n", rdusp());
}
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int pid;
mm_segment_t fs;
fs = get_fs();
set_fs (KERNEL_DS);
{
register long retval __asm__ ("d0");
register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
retval = __NR_clone;
__asm__ __volatile__
("clrl %%d2\n\t"
"trap #0\n\t" /* Linux/m68k system call */
"tstl %0\n\t" /* child or parent */
"jne 1f\n\t" /* parent - jump */
#ifdef CONFIG_MMU
"lea %%sp@(%c7),%6\n\t" /* reload current */
"movel %6@,%6\n\t"
#endif
"movel %3,%%sp@-\n\t" /* push argument */
"jsr %4@\n\t" /* call fn */
"movel %0,%%d1\n\t" /* pass exit value */
"movel %2,%%d0\n\t" /* exit */
"trap #0\n"
"1:"
: "+d" (retval)
: "i" (__NR_clone), "i" (__NR_exit),
"r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
"i" (-THREAD_SIZE)
: "d2");
pid = retval;
}
set_fs (fs);
return pid;
}
EXPORT_SYMBOL(kernel_thread);
void flush_thread(void)
{
current->thread.fs = __USER_DS;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU) {
unsigned long zero = 0;
asm volatile("frestore %0": :"m" (zero));
}
#endif
}
/*
* "m68k_fork()".. By the time we get here, the
* non-volatile registers have also been saved on the
* stack. We do some ugly pointer stuff here.. (see
* also copy_thread)
*/
asmlinkage int m68k_fork(struct pt_regs *regs)
{
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
#include "process_mm.c" return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
#else #else
#include "process_no.c" return -EINVAL;
#endif #endif
}
asmlinkage int m68k_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
NULL, NULL);
}
asmlinkage int m68k_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
int __user *parent_tidptr, *child_tidptr;
/* syscall2 puts clone_flags in d1 and usp in d2 */
clone_flags = regs->d1;
newsp = regs->d2;
parent_tidptr = (int __user *)regs->d3;
child_tidptr = (int __user *)regs->d4;
if (!newsp)
newsp = rdusp();
return do_fork(clone_flags, newsp, regs, 0,
parent_tidptr, child_tidptr);
}
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct switch_stack * childstack, *stack;
unsigned long *retp;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->d0 = 0;
retp = ((unsigned long *) regs);
stack = ((struct switch_stack *) retp) - 1;
childstack = ((struct switch_stack *) childregs) - 1;
*childstack = *stack;
childstack->retpc = (unsigned long)ret_from_fork;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96
*/
p->thread.fs = get_fs().seg;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU) {
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
"fmovel %/fpiar,%1\n\t"
"fmovel %/fpcr,%2\n\t"
"fmovel %/fpsr,%3"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0]),
"m" (p->thread.fpcntl[1]),
"m" (p->thread.fpcntl[2])
: "memory");
} else {
asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0])
: "memory");
}
}
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
#endif /* CONFIG_FPU */
return 0;
}
/* Fill in the fpu structure for a core dump. */
#ifdef CONFIG_FPU
int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
{
char fpustate[216];
if (FPU_IS_EMU) {
int i;
memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
memcpy(fpu->fpregs, current->thread.fp, 96);
/* Convert internal fpu reg representation
* into long double format
*/
for (i = 0; i < 24; i += 3)
fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
((fpu->fpregs[i] & 0x0000ffff) << 16);
return 1;
}
/* First dump the fpu context to avoid protocol violation. */
asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
return 0;
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovel %/fpiar,%0\n\t"
"fmovel %/fpcr,%1\n\t"
"fmovel %/fpsr,%2\n\t"
"fmovemd %/fp0-%/fp7,%3"
:
: "m" (fpu->fpcntl[0]),
"m" (fpu->fpcntl[1]),
"m" (fpu->fpcntl[2]),
"m" (fpu->fpregs[0])
: "memory");
} else {
asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
:
: "m" (fpu->fpcntl[0])
: "memory");
asm volatile ("fmovemx %/fp0-%/fp7,%0"
:
: "m" (fpu->fpregs[0])
: "memory");
}
return 1;
}
EXPORT_SYMBOL(dump_fpu);
#endif /* CONFIG_FPU */
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(const char __user *name,
const char __user *const __user *argv,
const char __user *const __user *envp)
{
int error;
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *) fp;
} while (count++ < 16);
return 0;
}
arch/m68k/kernel/process_mm.c deleted 100644 → 0
View file @ ad12ab25
/*
* linux/arch/m68k/kernel/process.c
*
* Copyright (C) 1995 Hamish Macdonald
*
* 68060 fixes by Jesper Skov
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/reboot.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
asmlinkage void ret_from_fork(void);
/*
* Return saved PC from a blocked thread
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
/* Check whether the thread is blocked in resume() */
if (in_sched_functions(sw->retpc))
return ((unsigned long *)sw->a6)[1];
else
return sw->retpc;
}
/*
* The idle loop on an m68k..
*/
static void default_idle(void)
{
if (!need_resched())
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari (falcon) */
__asm__("stop #0x2200" : : : "cc");
#else
__asm__("stop #0x2000" : : : "cc");
#endif
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched())
idle();
schedule_preempt_disabled();
}
}
void machine_restart(char * __unused)
{
if (mach_reset)
mach_reset();
for (;;);
}
void machine_halt(void)
{
if (mach_halt)
mach_halt();
for (;;);
}
void machine_power_off(void)
{
if (mach_power_off)
mach_power_off();
for (;;);
}
void (*pm_power_off)(void) = machine_power_off;
EXPORT_SYMBOL(pm_power_off);
void show_regs(struct pt_regs * regs)
{
printk("\n");
printk("Format %02x Vector: %04x PC: %08lx Status: %04x %s\n",
regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
printk("ORIG_D0: %08lx D0: %08lx A2: %08lx A1: %08lx\n",
regs->orig_d0, regs->d0, regs->a2, regs->a1);
printk("A0: %08lx D5: %08lx D4: %08lx\n",
regs->a0, regs->d5, regs->d4);
printk("D3: %08lx D2: %08lx D1: %08lx\n",
regs->d3, regs->d2, regs->d1);
if (!(regs->sr & PS_S))
printk("USP: %08lx\n", rdusp());
}
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int pid;
mm_segment_t fs;
fs = get_fs();
set_fs (KERNEL_DS);
{
register long retval __asm__ ("d0");
register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
retval = __NR_clone;
__asm__ __volatile__
("clrl %%d2\n\t"
"trap #0\n\t" /* Linux/m68k system call */
"tstl %0\n\t" /* child or parent */
"jne 1f\n\t" /* parent - jump */
"lea %%sp@(%c7),%6\n\t" /* reload current */
"movel %6@,%6\n\t"
"movel %3,%%sp@-\n\t" /* push argument */
"jsr %4@\n\t" /* call fn */
"movel %0,%%d1\n\t" /* pass exit value */
"movel %2,%%d0\n\t" /* exit */
"trap #0\n"
"1:"
: "+d" (retval)
: "i" (__NR_clone), "i" (__NR_exit),
"r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
"i" (-THREAD_SIZE)
: "d2");
pid = retval;
}
set_fs (fs);
return pid;
}
EXPORT_SYMBOL(kernel_thread);
void flush_thread(void)
{
unsigned long zero = 0;
current->thread.fs = __USER_DS;
if (!FPU_IS_EMU)
asm volatile("frestore %0": :"m" (zero));
}
/*
* "m68k_fork()".. By the time we get here, the
* non-volatile registers have also been saved on the
* stack. We do some ugly pointer stuff here.. (see
* also copy_thread)
*/
asmlinkage int m68k_fork(struct pt_regs *regs)
{
return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
}
asmlinkage int m68k_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
NULL, NULL);
}
asmlinkage int m68k_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
int __user *parent_tidptr, *child_tidptr;
/* syscall2 puts clone_flags in d1 and usp in d2 */
clone_flags = regs->d1;
newsp = regs->d2;
parent_tidptr = (int __user *)regs->d3;
child_tidptr = (int __user *)regs->d4;
if (!newsp)
newsp = rdusp();
return do_fork(clone_flags, newsp, regs, 0,
parent_tidptr, child_tidptr);
}
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct switch_stack * childstack, *stack;
unsigned long *retp;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->d0 = 0;
retp = ((unsigned long *) regs);
stack = ((struct switch_stack *) retp) - 1;
childstack = ((struct switch_stack *) childregs) - 1;
*childstack = *stack;
childstack->retpc = (unsigned long)ret_from_fork;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96
*/
p->thread.fs = get_fs().seg;
if (!FPU_IS_EMU) {
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
"fmovel %/fpiar,%1\n\t"
"fmovel %/fpcr,%2\n\t"
"fmovel %/fpsr,%3"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0]),
"m" (p->thread.fpcntl[1]),
"m" (p->thread.fpcntl[2])
: "memory");
} else {
asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0])
: "memory");
}
}
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
return 0;
}
/* Fill in the fpu structure for a core dump. */
int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
{
char fpustate[216];
if (FPU_IS_EMU) {
int i;
memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
memcpy(fpu->fpregs, current->thread.fp, 96);
/* Convert internal fpu reg representation
* into long double format
*/
for (i = 0; i < 24; i += 3)
fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
((fpu->fpregs[i] & 0x0000ffff) << 16);
return 1;
}
/* First dump the fpu context to avoid protocol violation. */
asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
return 0;
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovel %/fpiar,%0\n\t"
"fmovel %/fpcr,%1\n\t"
"fmovel %/fpsr,%2\n\t"
"fmovemd %/fp0-%/fp7,%3"
:
: "m" (fpu->fpcntl[0]),
"m" (fpu->fpcntl[1]),
"m" (fpu->fpcntl[2]),
"m" (fpu->fpregs[0])
: "memory");
} else {
asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
:
: "m" (fpu->fpcntl[0])
: "memory");
asm volatile ("fmovemx %/fp0-%/fp7,%0"
:
: "m" (fpu->fpregs[0])
: "memory");
}
return 1;
}
EXPORT_SYMBOL(dump_fpu);
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(const char __user *name,
const char __user *const __user *argv,
const char __user *const __user *envp)
{
int error;
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *) fp;
} while (count++ < 16);
return 0;
}
arch/m68k/kernel/process_no.c deleted 100644 → 0
View file @ ad12ab25
/*
* linux/arch/m68knommu/kernel/process.c
*
* Copyright (C) 1995 Hamish Macdonald
*
* 68060 fixes by Jesper Skov
*
* uClinux changes
* Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com>
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
asmlinkage void ret_from_fork(void);
/*
* The following aren't currently used.
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
/*
* The idle loop on an m68knommu..
*/
static void default_idle(void)
{
local_irq_disable();
while (!need_resched()) {
/* This stop will re-enable interrupts */
__asm__("stop #0x2000" : : : "cc");
local_irq_disable();
}
local_irq_enable();
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
idle();
schedule_preempt_disabled();
}
}
void machine_restart(char * __unused)
{
if (mach_reset)
mach_reset();
for (;;);
}
void machine_halt(void)
{
if (mach_halt)
mach_halt();
for (;;);
}
void machine_power_off(void)
{
if (mach_power_off)
mach_power_off();
for (;;);
}
void show_regs(struct pt_regs * regs)
{
printk(KERN_NOTICE "\n");
printk(KERN_NOTICE "Format %02x Vector: %04x PC: %08lx Status: %04x %s\n",
regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
printk(KERN_NOTICE "ORIG_D0: %08lx D0: %08lx A2: %08lx A1: %08lx\n",
regs->orig_d0, regs->d0, regs->a2, regs->a1);
printk(KERN_NOTICE "A0: %08lx D5: %08lx D4: %08lx\n",
regs->a0, regs->d5, regs->d4);
printk(KERN_NOTICE "D3: %08lx D2: %08lx D1: %08lx\n",
regs->d3, regs->d2, regs->d1);
if (!(regs->sr & PS_S))
printk(KERN_NOTICE "USP: %08lx\n", rdusp());
}
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int retval;
long clone_arg = flags | CLONE_VM;
mm_segment_t fs;
fs = get_fs();
set_fs(KERNEL_DS);
__asm__ __volatile__ (
"movel %%sp, %%d2\n\t"
"movel %5, %%d1\n\t"
"movel %1, %%d0\n\t"
"trap #0\n\t"
"cmpl %%sp, %%d2\n\t"
"jeq 1f\n\t"
"movel %3, %%sp@-\n\t"
"jsr %4@\n\t"
"movel %2, %%d0\n\t"
"trap #0\n"
"1:\n\t"
"movel %%d0, %0\n"
: "=d" (retval)
: "i" (__NR_clone),
"i" (__NR_exit),
"a" (arg),
"a" (fn),
"a" (clone_arg)
: "cc", "%d0", "%d1", "%d2");
set_fs(fs);
return retval;
}
EXPORT_SYMBOL(kernel_thread);
void flush_thread(void)
{
#ifdef CONFIG_FPU
unsigned long zero = 0;
#endif
current->thread.fs = __USER_DS;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU)
asm volatile (".chip 68k/68881\n\t"
"frestore %0\n\t"
".chip 68k" : : "m" (zero));
#endif
}
/*
* "m68k_fork()".. By the time we get here, the
* non-volatile registers have also been saved on the
* stack. We do some ugly pointer stuff here.. (see
* also copy_thread)
*/
asmlinkage int m68k_fork(struct pt_regs *regs)
{
/* fork almost works, enough to trick you into looking elsewhere :-( */
return(-EINVAL);
}
asmlinkage int m68k_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
}
asmlinkage int m68k_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
/* syscall2 puts clone_flags in d1 and usp in d2 */
clone_flags = regs->d1;
newsp = regs->d2;
if (!newsp)
newsp = rdusp();
return do_fork(clone_flags, newsp, regs, 0, NULL, NULL);
}
int copy_thread(unsigned long clone_flags,
unsigned long usp, unsigned long topstk,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct switch_stack * childstack, *stack;
unsigned long *retp;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->d0 = 0;
retp = ((unsigned long *) regs);
stack = ((struct switch_stack *) retp) - 1;
childstack = ((struct switch_stack *) childregs) - 1;
*childstack = *stack;
childstack->retpc = (unsigned long)ret_from_fork;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96
*/
p->thread.fs = get_fs().seg;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU) {
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
if (p->thread.fpstate[0])
asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
: : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
: "memory");
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
#endif
return 0;
}
/* Fill in the fpu structure for a core dump. */
int dump_fpu(struct pt_regs *regs, struct user_m68kfp_struct *fpu)
{
#ifdef CONFIG_FPU
char fpustate[216];
if (FPU_IS_EMU) {
int i;
memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
memcpy(fpu->fpregs, current->thread.fp, 96);
/* Convert internal fpu reg representation
* into long double format
*/
for (i = 0; i < 24; i += 3)
fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
((fpu->fpregs[i] & 0x0000ffff) << 16);
return 1;
}
/* First dump the fpu context to avoid protocol violation. */
asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
if (!fpustate[0])
return 0;
asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
:: "m" (fpu->fpcntl[0])
: "memory");
asm volatile ("fmovemx %/fp0-%/fp7,%0"
:: "m" (fpu->fpregs[0])
: "memory");
#endif
return 1;
}
EXPORT_SYMBOL(dump_fpu);
/*
* Generic dumping code. Used for panic and debug.
*/
void dump(struct pt_regs *fp)
{
unsigned long *sp;
unsigned char *tp;
int i;
printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
if (current->mm) {
printk(KERN_EMERG "TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
(int) current->mm->start_code,
(int) current->mm->end_code,
(int) current->mm->start_data,
(int) current->mm->end_data,
(int) current->mm->end_data,
(int) current->mm->brk);
printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
(int) current->mm->start_stack,
(int)(((unsigned long) current) + THREAD_SIZE));
}
printk(KERN_EMERG "PC: %08lx\n", fp->pc);
printk(KERN_EMERG "SR: %08lx SP: %08lx\n", (long) fp->sr, (long) fp);
printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %p\n",
(unsigned int) rdusp(), fp);
printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
printk(KERN_EMERG "KERNEL STACK:");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
printk(KERN_EMERG "USER STACK:");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
}
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(const char *name,
const char *const *argv,
const char *const *envp)
{
int error;
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)p;
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= THREAD_SIZE-8+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *) fp;
} while (count++ < 16);
return 0;
}
/*
* Return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
/* Check whether the thread is blocked in resume() */
if (in_sched_functions(sw->retpc))
return ((unsigned long *)sw->a6)[1];
else
return sw->retpc;
}
arch/m68k/kernel/ptrace.c
View file @ b57cb723
/*
* linux/arch/m68k/kernel/ptrace.c
*
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f
/* sets the trace bits. */
#define TRACE_BITS 0xC000
#define T1_BIT 0x8000
#define T0_BIT 0x4000
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \
- sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
saved. Notice that usp has no stack-slot and needs to be treated
specially (see get_reg/put_reg below). */
static const int regoff[] = {
[0] = PT_REG(d1),
[1] = PT_REG(d2),
[2] = PT_REG(d3),
[3] = PT_REG(d4),
[4] = PT_REG(d5),
[5] = SW_REG(d6),
[6] = SW_REG(d7),
[7] = PT_REG(a0),
[8] = PT_REG(a1),
[9] = PT_REG(a2),
[10] = SW_REG(a3),
[11] = SW_REG(a4),
[12] = SW_REG(a5),
[13] = SW_REG(a6),
[14] = PT_REG(d0),
[15] = -1,
[16] = PT_REG(orig_d0),
[17] = PT_REG(sr),
[18] = PT_REG(pc),
};
/*
* Get contents of register REGNO in task TASK.
*/
static inline long get_reg(struct task_struct *task, int regno)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return 0;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR)
return *(unsigned short *)addr;
}
return *addr;
}
/*
* Write contents of register REGNO in task TASK.
*/
static inline int put_reg(struct task_struct *task, int regno,
unsigned long data)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return -1;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR) {
*(unsigned short *)addr = data;
return 0;
}
}
*addr = data;
return 0;
}
/*
* Make sure the single step bit is not set.
*/
static inline void singlestep_disable(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp);
clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
{
singlestep_disable(child);
}
void user_enable_single_step(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T1_BIT);
set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
#include "ptrace_mm.c" void user_enable_block_step(struct task_struct *child)
#else {
#include "ptrace_no.c" unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T0_BIT);
}
#endif #endif
void user_disable_single_step(struct task_struct *child)
{
singlestep_disable(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
int i, ret = 0;
int regno = addr >> 2; /* temporary hack. */
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
if (addr & 3)
goto out_eio;
if (regno >= 0 && regno < 19) {
tmp = get_reg(child, regno);
} else if (regno >= 21 && regno < 49) {
tmp = child->thread.fp[regno - 21];
/* Convert internal fpu reg representation
* into long double format
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
tmp = ((tmp & 0xffff0000) << 15) |
((tmp & 0x0000ffff) << 16);
#ifndef CONFIG_MMU
} else if (regno == 49) {
tmp = child->mm->start_code;
} else if (regno == 50) {
tmp = child->mm->start_data;
} else if (regno == 51) {
tmp = child->mm->end_code;
#endif
} else
goto out_eio;
ret = put_user(tmp, datap);
break;
case PTRACE_POKEUSR:
/* write the word at location addr in the USER area */
if (addr & 3)
goto out_eio;
if (regno == PT_SR) {
data &= SR_MASK;
data |= get_reg(child, PT_SR) & ~SR_MASK;
}
if (regno >= 0 && regno < 19) {
if (put_reg(child, regno, data))
goto out_eio;
} else if (regno >= 21 && regno < 48) {
/* Convert long double format
* into internal fpu reg representation
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
data <<= 15;
data = (data & 0xffff0000) |
((data & 0x0000ffff) >> 1);
}
child->thread.fp[regno - 21] = data;
} else
goto out_eio;
break;
case PTRACE_GETREGS: /* Get all gp regs from the child. */
for (i = 0; i < 19; i++) {
tmp = get_reg(child, i);
ret = put_user(tmp, datap);
if (ret)
break;
datap++;
}
break;
case PTRACE_SETREGS: /* Set all gp regs in the child. */
for (i = 0; i < 19; i++) {
ret = get_user(tmp, datap);
if (ret)
break;
if (i == PT_SR) {
tmp &= SR_MASK;
tmp |= get_reg(child, PT_SR) & ~SR_MASK;
}
put_reg(child, i, tmp);
datap++;
}
break;
case PTRACE_GETFPREGS: /* Get the child FPU state. */
if (copy_to_user(datap, &child->thread.fp,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_SETFPREGS: /* Set the child FPU state. */
if (copy_from_user(&child->thread.fp, datap,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value, datap);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
out_eio:
return -EIO;
}
asmlinkage void syscall_trace(void)
{
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
/*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
*/
if (current->exit_code) {
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
}
#ifdef CONFIG_COLDFIRE
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE))
ret = tracehook_report_syscall_entry(task_pt_regs(current));
return ret;
}
asmlinkage void syscall_trace_leave(void)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
#endif /* CONFIG_COLDFIRE */
arch/m68k/kernel/ptrace_mm.c deleted 100644 → 0
View file @ ad12ab25
/*
* linux/arch/m68k/kernel/ptrace.c
*
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f
/* sets the trace bits. */
#define TRACE_BITS 0xC000
#define T1_BIT 0x8000
#define T0_BIT 0x4000
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \
- sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
saved. Notice that usp has no stack-slot and needs to be treated
specially (see get_reg/put_reg below). */
static const int regoff[] = {
[0] = PT_REG(d1),
[1] = PT_REG(d2),
[2] = PT_REG(d3),
[3] = PT_REG(d4),
[4] = PT_REG(d5),
[5] = SW_REG(d6),
[6] = SW_REG(d7),
[7] = PT_REG(a0),
[8] = PT_REG(a1),
[9] = PT_REG(a2),
[10] = SW_REG(a3),
[11] = SW_REG(a4),
[12] = SW_REG(a5),
[13] = SW_REG(a6),
[14] = PT_REG(d0),
[15] = -1,
[16] = PT_REG(orig_d0),
[17] = PT_REG(sr),
[18] = PT_REG(pc),
};
/*
* Get contents of register REGNO in task TASK.
*/
static inline long get_reg(struct task_struct *task, int regno)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return 0;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR)
return *(unsigned short *)addr;
}
return *addr;
}
/*
* Write contents of register REGNO in task TASK.
*/
static inline int put_reg(struct task_struct *task, int regno,
unsigned long data)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return -1;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR) {
*(unsigned short *)addr = data;
return 0;
}
}
*addr = data;
return 0;
}
/*
* Make sure the single step bit is not set.
*/
static inline void singlestep_disable(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp);
clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
{
singlestep_disable(child);
}
void user_enable_single_step(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T1_BIT);
set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
void user_enable_block_step(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T0_BIT);
}
void user_disable_single_step(struct task_struct *child)
{
singlestep_disable(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
int i, ret = 0;
int regno = addr >> 2; /* temporary hack. */
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
if (addr & 3)
goto out_eio;
if (regno >= 0 && regno < 19) {
tmp = get_reg(child, regno);
} else if (regno >= 21 && regno < 49) {
tmp = child->thread.fp[regno - 21];
/* Convert internal fpu reg representation
* into long double format
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
tmp = ((tmp & 0xffff0000) << 15) |
((tmp & 0x0000ffff) << 16);
} else
goto out_eio;
ret = put_user(tmp, datap);
break;
case PTRACE_POKEUSR:
/* write the word at location addr in the USER area */
if (addr & 3)
goto out_eio;
if (regno == PT_SR) {
data &= SR_MASK;
data |= get_reg(child, PT_SR) & ~SR_MASK;
}
if (regno >= 0 && regno < 19) {
if (put_reg(child, regno, data))
goto out_eio;
} else if (regno >= 21 && regno < 48) {
/* Convert long double format
* into internal fpu reg representation
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
data <<= 15;
data = (data & 0xffff0000) |
((data & 0x0000ffff) >> 1);
}
child->thread.fp[regno - 21] = data;
} else
goto out_eio;
break;
case PTRACE_GETREGS: /* Get all gp regs from the child. */
for (i = 0; i < 19; i++) {
tmp = get_reg(child, i);
ret = put_user(tmp, datap);
if (ret)
break;
datap++;
}
break;
case PTRACE_SETREGS: /* Set all gp regs in the child. */
for (i = 0; i < 19; i++) {
ret = get_user(tmp, datap);
if (ret)
break;
if (i == PT_SR) {
tmp &= SR_MASK;
tmp |= get_reg(child, PT_SR) & ~SR_MASK;
}
put_reg(child, i, tmp);
datap++;
}
break;
case PTRACE_GETFPREGS: /* Get the child FPU state. */
if (copy_to_user(datap, &child->thread.fp,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_SETFPREGS: /* Set the child FPU state. */
if (copy_from_user(&child->thread.fp, datap,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value, datap);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
out_eio:
return -EIO;
}
asmlinkage void syscall_trace(void)
{
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
/*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
*/
if (current->exit_code) {
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
}
#ifdef CONFIG_COLDFIRE
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE))
ret = tracehook_report_syscall_entry(task_pt_regs(current));
return ret;
}
asmlinkage void syscall_trace_leave(void)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
#endif /* CONFIG_COLDFIRE */
arch/m68k/kernel/ptrace_no.c deleted 100644 → 0
View file @ ad12ab25
/*
* linux/arch/m68knommu/kernel/ptrace.c
*
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f
/* sets the trace bits. */
#define TRACE_BITS 0x8000
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \
- sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
saved. Notice that usp has no stack-slot and needs to be treated
specially (see get_reg/put_reg below). */
static int regoff[] = {
PT_REG(d1), PT_REG(d2), PT_REG(d3), PT_REG(d4),
PT_REG(d5), SW_REG(d6), SW_REG(d7), PT_REG(a0),
PT_REG(a1), PT_REG(a2), SW_REG(a3), SW_REG(a4),
SW_REG(a5), SW_REG(a6), PT_REG(d0), -1,
PT_REG(orig_d0), PT_REG(sr), PT_REG(pc),
};
/*
* Get contents of register REGNO in task TASK.
*/
static inline long get_reg(struct task_struct *task, int regno)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return 0;
return *addr;
}
/*
* Write contents of register REGNO in task TASK.
*/
static inline int put_reg(struct task_struct *task, int regno,
unsigned long data)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *) (task->thread.esp0 + regoff[regno]);
else
return -1;
*addr = data;
return 0;
}
void user_enable_single_step(struct task_struct *task)
{
unsigned long srflags;
srflags = get_reg(task, PT_SR) | (TRACE_BITS << 16);
put_reg(task, PT_SR, srflags);
}
void user_disable_single_step(struct task_struct *task)
{
unsigned long srflags;
srflags = get_reg(task, PT_SR) & ~(TRACE_BITS << 16);
put_reg(task, PT_SR, srflags);
}
/*
* Called by kernel/ptrace.c when detaching..
*
* Make sure the single step bit is not set.
*/
void ptrace_disable(struct task_struct *child)
{
/* make sure the single step bit is not set. */
user_disable_single_step(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
int ret;
int regno = addr >> 2;
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
unsigned long tmp;
ret = -EIO;
if ((addr & 3) || addr > sizeof(struct user) - 3)
break;
tmp = 0; /* Default return condition */
ret = -EIO;
if (regno < 19) {
tmp = get_reg(child, regno);
if (regno == PT_SR)
tmp >>= 16;
} else if (regno >= 21 && regno < 49) {
tmp = child->thread.fp[regno - 21];
} else if (regno == 49) {
tmp = child->mm->start_code;
} else if (regno == 50) {
tmp = child->mm->start_data;
} else if (regno == 51) {
tmp = child->mm->end_code;
} else
break;
ret = put_user(tmp, datap);
break;
}
case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
ret = -EIO;
if ((addr & 3) || addr > sizeof(struct user) - 3)
break;
if (regno == PT_SR) {
data &= SR_MASK;
data <<= 16;
data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
}
if (regno < 19) {
if (put_reg(child, regno, data))
break;
ret = 0;
break;
}
if (regno >= 21 && regno < 48)
{
child->thread.fp[regno - 21] = data;
ret = 0;
}
break;
case PTRACE_GETREGS: { /* Get all gp regs from the child. */
int i;
unsigned long tmp;
for (i = 0; i < 19; i++) {
tmp = get_reg(child, i);
if (i == PT_SR)
tmp >>= 16;
if (put_user(tmp, datap)) {
ret = -EFAULT;
break;
}
datap++;
}
ret = 0;
break;
}
case PTRACE_SETREGS: { /* Set all gp regs in the child. */
int i;
unsigned long tmp;
for (i = 0; i < 19; i++) {
if (get_user(tmp, datap)) {
ret = -EFAULT;
break;
}
if (i == PT_SR) {
tmp &= SR_MASK;
tmp <<= 16;
tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
}
put_reg(child, i, tmp);
datap++;
}
ret = 0;
break;
}
#ifdef PTRACE_GETFPREGS
case PTRACE_GETFPREGS: { /* Get the child FPU state. */
ret = 0;
if (copy_to_user(datap, &child->thread.fp,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
}
#endif
#ifdef PTRACE_SETFPREGS
case PTRACE_SETFPREGS: { /* Set the child FPU state. */
ret = 0;
if (copy_from_user(&child->thread.fp, datap,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
}
#endif
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value, datap);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
}
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE))
ret = tracehook_report_syscall_entry(task_pt_regs(current));
return ret;
}
asmlinkage void syscall_trace_leave(void)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
arch/m68k/kernel/setup_no.c
View file @ b57cb723
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/initrd.h> #include <linux/initrd.h>
#include <linux/root_dev.h> #include <linux/root_dev.h>
#include <linux/rtc.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -47,7 +48,9 @@ EXPORT_SYMBOL(memory_end); ...@@ -47,7 +48,9 @@ EXPORT_SYMBOL(memory_end);
char __initdata command_line[COMMAND_LINE_SIZE]; char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */ /* machine dependent timer functions */
void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
int (*mach_set_clock_mmss)(unsigned long); int (*mach_set_clock_mmss)(unsigned long);
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */ /* machine dependent reboot functions */
void (*mach_reset)(void); void (*mach_reset)(void);
......
arch/m68k/kernel/time.c
View file @ b57cb723
#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) /*
#include "time_mm.c" * linux/arch/m68k/kernel/time.c
#else *
#include "time_no.c" * Copyright (C) 1991, 1992, 1995 Linus Torvalds
#endif *
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/profile.h>
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
*/
static irqreturn_t timer_interrupt(int irq, void *dummy)
{
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
if (mach_heartbeat) {
static unsigned cnt = 0, period = 0, dist = 0;
if (cnt == 0 || cnt == dist)
mach_heartbeat( 1 );
else if (cnt == 7 || cnt == dist+7)
mach_heartbeat( 0 );
if (++cnt > period) {
cnt = 0;
/* The hyperbolic function below modifies the heartbeat period
* length in dependency of the current (5min) load. It goes
* through the points f(0)=126, f(1)=86, f(5)=51,
* f(inf)->30. */
period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
dist = period / 4;
}
}
#endif /* CONFIG_HEARTBEAT */
return IRQ_HANDLED;
}
void read_persistent_clock(struct timespec *ts)
{
struct rtc_time time;
ts->tv_sec = 0;
ts->tv_nsec = 0;
if (mach_hwclk) {
mach_hwclk(0, &time);
if ((time.tm_year += 1900) < 1970)
time.tm_year += 100;
ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
time.tm_hour, time.tm_min, time.tm_sec);
}
}
void __init time_init(void)
{
mach_sched_init(timer_interrupt);
}
#ifdef CONFIG_M68KCLASSIC
u32 arch_gettimeoffset(void)
{
return mach_gettimeoffset() * 1000;
}
static int __init rtc_init(void)
{
struct platform_device *pdev;
if (!mach_hwclk)
return -ENODEV;
pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return 0;
}
module_init(rtc_init);
#endif /* CONFIG_M68KCLASSIC */
arch/m68k/kernel/time_mm.c deleted 100644 → 0
View file @ ad12ab25
/*
* linux/arch/m68k/kernel/time.c
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/profile.h>
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
return mach_set_clock_mmss (nowtime);
return -1;
}
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
*/
static irqreturn_t timer_interrupt(int irq, void *dummy)
{
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
if (mach_heartbeat) {
static unsigned cnt = 0, period = 0, dist = 0;
if (cnt == 0 || cnt == dist)
mach_heartbeat( 1 );
else if (cnt == 7 || cnt == dist+7)
mach_heartbeat( 0 );
if (++cnt > period) {
cnt = 0;
/* The hyperbolic function below modifies the heartbeat period
* length in dependency of the current (5min) load. It goes
* through the points f(0)=126, f(1)=86, f(5)=51,
* f(inf)->30. */
period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
dist = period / 4;
}
}
#endif /* CONFIG_HEARTBEAT */
return IRQ_HANDLED;
}
void read_persistent_clock(struct timespec *ts)
{
struct rtc_time time;
ts->tv_sec = 0;
ts->tv_nsec = 0;
if (mach_hwclk) {
mach_hwclk(0, &time);
if ((time.tm_year += 1900) < 1970)
time.tm_year += 100;
ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
time.tm_hour, time.tm_min, time.tm_sec);
}
}
void __init time_init(void)
{
mach_sched_init(timer_interrupt);
}
u32 arch_gettimeoffset(void)
{
return mach_gettimeoffset() * 1000;
}
static int __init rtc_init(void)
{
struct platform_device *pdev;
if (!mach_hwclk)
return -ENODEV;
pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return 0;
}
module_init(rtc_init);
arch/m68k/kernel/time_no.c deleted 100644 → 0
View file @ ad12ab25
/*
* linux/arch/m68knommu/kernel/time.c
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/profile.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <asm/machdep.h>
#include <asm/irq_regs.h>
#define TICK_SIZE (tick_nsec / 1000)
/* machine dependent timer functions */
void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
return mach_set_clock_mmss (nowtime);
return -1;
}
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
*/
irqreturn_t arch_timer_interrupt(int irq, void *dummy)
{
if (current->pid)
profile_tick(CPU_PROFILING);
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
return(IRQ_HANDLED);
}
#endif
static unsigned long read_rtc_mmss(void)
{
unsigned int year, mon, day, hour, min, sec;
if (mach_gettod) {
mach_gettod(&year, &mon, &day, &hour, &min, &sec);
if ((year += 1900) < 1970)
year += 100;
} else {
year = 1970;
mon = day = 1;
hour = min = sec = 0;
}
return mktime(year, mon, day, hour, min, sec);
}
void read_persistent_clock(struct timespec *ts)
{
ts->tv_sec = read_rtc_mmss();
ts->tv_nsec = 0;
}
int update_persistent_clock(struct timespec now)
{
return set_rtc_mmss(now.tv_sec);
}
void time_init(void)
{
hw_timer_init();
}
arch/m68k/kernel/vmlinux-nommu.lds
View file @ b57cb723
/* /*
* vmlinux.lds.S -- master linker script for m68knommu arch * vmlinux.lds.S -- master linker script for m68knommu arch
* *
* (C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com> * (C) Copyright 2002-2012, Greg Ungerer <gerg@snapgear.com>
* *
* This linker script is equipped to build either ROM loaded or RAM * This linker script is equipped to build either ROM loaded or RAM
* run kernels. * run kernels.
*/ */
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/thread_info.h>
#if defined(CONFIG_RAMKERNEL) #if defined(CONFIG_RAMKERNEL)
#define RAM_START CONFIG_KERNELBASE #define KTEXT_ADDR CONFIG_KERNELBASE
#define RAM_LENGTH (CONFIG_RAMBASE + CONFIG_RAMSIZE - CONFIG_KERNELBASE)
#define TEXT ram
#define DATA ram
#define INIT ram
#define BSSS ram
#endif
#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
#define RAM_START CONFIG_RAMBASE
#define RAM_LENGTH CONFIG_RAMSIZE
#define ROMVEC_START CONFIG_ROMVEC
#define ROMVEC_LENGTH CONFIG_ROMVECSIZE
#define ROM_START CONFIG_ROMSTART
#define ROM_LENGTH CONFIG_ROMSIZE
#define TEXT rom
#define DATA ram
#define INIT ram
#define BSSS ram
#endif #endif
#if defined(CONFIG_ROMKERNEL)
#ifndef DATA_ADDR #define KTEXT_ADDR CONFIG_ROMSTART
#define DATA_ADDR #define KDATA_ADDR CONFIG_KERNELBASE
#define LOAD_OFFSET KDATA_ADDR + (ADDR(.text) + SIZEOF(.text))
#endif #endif
#include <asm/page.h>
#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
OUTPUT_ARCH(m68k) OUTPUT_ARCH(m68k)
ENTRY(_start) ENTRY(_start)
MEMORY {
ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
#ifdef ROM_START
romvec : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
rom : ORIGIN = ROM_START, LENGTH = ROM_LENGTH
#endif
}
jiffies = jiffies_64 + 4; jiffies = jiffies_64 + 4;
SECTIONS { SECTIONS {
#ifdef ROMVEC_START #ifdef CONFIG_ROMVEC
. = ROMVEC_START ; . = CONFIG_ROMVEC;
.romvec : { .romvec : {
__rom_start = . ; __rom_start = .;
_romvec = .; _romvec = .;
*(.romvec)
*(.data..initvect) *(.data..initvect)
} > romvec }
#endif #endif
. = KTEXT_ADDR;
_text = .;
_stext = .;
.text : { .text : {
_text = .;
_stext = . ;
HEAD_TEXT HEAD_TEXT
TEXT_TEXT TEXT_TEXT
SCHED_TEXT SCHED_TEXT
LOCK_TEXT LOCK_TEXT
*(.text..lock)
*(.fixup) *(.fixup)
. = ALIGN(16);
}
_etext = .;
#ifdef KDATA_ADDR
. = KDATA_ADDR;
#endif
_sdata = .;
RO_DATA_SECTION(PAGE_SIZE)
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
_edata = .;
. = ALIGN(16); /* Exception table */ EXCEPTION_TABLE(16)
__start___ex_table = .; NOTES
*(__ex_table)
__stop___ex_table = .;
*(.rodata) *(.rodata.*)
*(__vermagic) /* Kernel version magic */
*(.rodata1)
*(.rodata.str1.1)
/* Kernel symbol table: Normal symbols */
. = ALIGN(4);
__start___ksymtab = .;
*(SORT(___ksymtab+*))
__stop___ksymtab = .;
/* Kernel symbol table: GPL-only symbols */
__start___ksymtab_gpl = .;
*(SORT(___ksymtab_gpl+*))
__stop___ksymtab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___ksymtab_unused = .;
*(SORT(___ksymtab_unused+*))
__stop___ksymtab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___ksymtab_unused_gpl = .;
*(SORT(___ksymtab_unused_gpl+*))
__stop___ksymtab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___ksymtab_gpl_future = .;
*(SORT(___ksymtab_gpl_future+*))
__stop___ksymtab_gpl_future = .;
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
*(SORT(___kcrctab+*))
__stop___kcrctab = .;
/* Kernel symbol table: GPL-only symbols */
__start___kcrctab_gpl = .;
*(SORT(___kcrctab_gpl+*))
__stop___kcrctab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___kcrctab_unused = .;
*(SORT(___kcrctab_unused+*))
__stop___kcrctab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___kcrctab_unused_gpl = .;
*(SORT(___kcrctab_unused_gpl+*))
__stop___kcrctab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
*(SORT(___kcrctab_gpl_future+*))
__stop___kcrctab_gpl_future = .;
/* Kernel symbol table: strings */
*(__ksymtab_strings)
/* Built-in module parameters */
. = ALIGN(4) ;
__start___param = .;
*(__param)
__stop___param = .;
/* Built-in module versions */
. = ALIGN(4) ;
__start___modver = .;
*(__modver)
__stop___modver = .;
. = ALIGN(4) ;
_etext = . ;
} > TEXT
.data DATA_ADDR : {
. = ALIGN(4);
_sdata = . ;
DATA_DATA
CACHELINE_ALIGNED_DATA(32)
PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data..shared_aligned)
INIT_TASK_DATA(THREAD_SIZE)
_edata = . ;
} > DATA
. = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
PERCPU_SECTION(16)
.m68k_fixup : { .m68k_fixup : {
__start_fixup = .; __start_fixup = .;
*(.m68k_fixup) *(.m68k_fixup)
__stop_fixup = .; __stop_fixup = .;
} > DATA }
NOTES > DATA
.init.text : {
. = ALIGN(PAGE_SIZE);
__init_begin = .;
} > INIT
INIT_TEXT_SECTION(PAGE_SIZE) > INIT
INIT_DATA_SECTION(16) > INIT
.init.data : { .init.data : {
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
__init_end = .; __init_end = .;
} > INIT }
.bss : { _sbss = .;
. = ALIGN(4); BSS_SECTION(0, 0, 0)
_sbss = . ; _ebss = .;
*(.bss)
*(COMMON) _end = .;
. = ALIGN(4) ;
_ebss = . ; STABS_DEBUG
_end = . ; .comment 0 : { *(.comment) }
} > BSSS
/* Sections to be discarded */
DISCARDS DISCARDS
} }
arch/m68k/platform/5206/config.c
View file @ b57cb723
...@@ -16,83 +16,6 @@ ...@@ -16,83 +16,6 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
/***************************************************************************/
static struct mcf_platform_uart m5206_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5206_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5206_uart_platform,
};
static struct platform_device *m5206_devices[] __initdata = {
&m5206_uart,
};
/***************************************************************************/
static void __init m5206_uart_init_line(int line, int irq)
{
if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5206_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5206_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5206_uart_init_line(line, m5206_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m5206_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5206_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/ /***************************************************************************/
...@@ -104,9 +27,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -104,9 +27,7 @@ void __init config_BSP(char *commandp, int size)
commandp[size-1] = 0; commandp[size-1] = 0;
#endif /* CONFIG_NETtel */ #endif /* CONFIG_NETtel */
mach_reset = m5206_cpu_reset; mach_sched_init = hw_timer_init;
m5206_timers_init();
m5206_uarts_init();
/* Only support the external interrupts on their primary level */ /* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1); mcf_mapirq2imr(25, MCFINTC_EINT1);
...@@ -115,13 +36,3 @@ void __init config_BSP(char *commandp, int size) ...@@ -115,13 +36,3 @@ void __init config_BSP(char *commandp, int size)
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
arch/m68k/platform/520x/config.c
View file @ b57cb723
...@@ -15,194 +15,14 @@ ...@@ -15,194 +15,14 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m520x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
static struct platform_device m520x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m520x_uart_platform,
};
static struct resource m520x_fec_resources[] = {
{
.start = MCFFEC_BASE,
.end = MCFFEC_BASE + MCFFEC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 36,
.end = 64 + 36,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 40,
.end = 64 + 40,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 42,
.end = 64 + 42,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m520x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m520x_fec_resources),
.resource = m520x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m520x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 46
#define MCFQSPI_CS1 47
#define MCFQSPI_CS2 27
static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m520x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
}
}
static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m520x_cs_control = {
.setup = m520x_cs_setup,
.teardown = m520x_cs_teardown,
.select = m520x_cs_select,
.deselect = m520x_cs_deselect,
};
static struct mcfqspi_platform_data m520x_qspi_data = {
.bus_num = 0,
.num_chipselect = 3,
.cs_control = &m520x_cs_control,
};
static struct platform_device m520x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m520x_qspi_resources),
.resource = m520x_qspi_resources,
.dev.platform_data = &m520x_qspi_data,
};
static void __init m520x_qspi_init(void) static void __init m520x_qspi_init(void)
{ {
...@@ -214,54 +34,28 @@ static void __init m520x_qspi_init(void) ...@@ -214,54 +34,28 @@ static void __init m520x_qspi_init(void)
par &= 0x00ff; par &= 0x00ff;
writew(par, MCF_GPIO_PAR_UART); writew(par, MCF_GPIO_PAR_UART);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m520x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m520x_uart,
&m520x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m520x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m520x_uart_init_line(int line, int irq) static void __init m520x_uarts_init(void)
{ {
u16 par; u16 par;
u8 par2; u8 par2;
switch (line) { /* UART0 and UART1 GPIO pin setup */
case 0: par = readw(MCF_GPIO_PAR_UART);
par = readw(MCF_GPIO_PAR_UART); par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
MCF_GPIO_PAR_UART_PAR_URXD0; writew(par, MCF_GPIO_PAR_UART);
writew(par, MCF_GPIO_PAR_UART);
break;
case 1:
par = readw(MCF_GPIO_PAR_UART);
par |= MCF_GPIO_PAR_UART_PAR_UTXD1 |
MCF_GPIO_PAR_UART_PAR_URXD1;
writew(par, MCF_GPIO_PAR_UART);
break;
case 2:
par2 = readb(MCF_GPIO_PAR_FECI2C);
par2 &= ~0x0F;
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
writeb(par2, MCF_GPIO_PAR_FECI2C);
break;
}
}
static void __init m520x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m520x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++) /* UART1 GPIO pin setup */
m520x_uart_init_line(line, m520x_uart_platform[line].irq); par2 = readb(MCF_GPIO_PAR_FECI2C);
par2 &= ~0x0F;
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
writeb(par2, MCF_GPIO_PAR_FECI2C);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -280,32 +74,14 @@ static void __init m520x_fec_init(void) ...@@ -280,32 +74,14 @@ static void __init m520x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m520x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m520x_cpu_reset; mach_sched_init = hw_timer_init;
m520x_uarts_init(); m520x_uarts_init();
m520x_fec_init(); m520x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m520x_qspi_init(); m520x_qspi_init();
#endif #endif
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
arch/m68k/platform/523x/config.c
View file @ b57cb723
...@@ -16,215 +16,13 @@ ...@@ -16,215 +16,13 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m523x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
},
{ },
};
static struct platform_device m523x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m523x_uart_platform,
};
static struct resource m523x_fec_resources[] = {
{
.start = MCFFEC_BASE,
.end = MCFFEC_BASE + MCFFEC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m523x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m523x_fec_resources),
.resource = m523x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m523x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 103
#define MCFQSPI_CS3 99
static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m523x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m523x_cs_control = {
.setup = m523x_cs_setup,
.teardown = m523x_cs_teardown,
.select = m523x_cs_select,
.deselect = m523x_cs_deselect,
};
static struct mcfqspi_platform_data m523x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m523x_cs_control,
};
static struct platform_device m523x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m523x_qspi_resources),
.resource = m523x_qspi_resources,
.dev.platform_data = &m523x_qspi_data,
};
static void __init m523x_qspi_init(void) static void __init m523x_qspi_init(void)
{ {
...@@ -237,15 +35,8 @@ static void __init m523x_qspi_init(void) ...@@ -237,15 +35,8 @@ static void __init m523x_qspi_init(void)
par &= 0x3f3f; par &= 0x3f3f;
writew(par, MCFGPIO_PAR_TIMER); writew(par, MCFGPIO_PAR_TIMER);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m523x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m523x_uart,
&m523x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m523x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
...@@ -263,31 +54,13 @@ static void __init m523x_fec_init(void) ...@@ -263,31 +54,13 @@ static void __init m523x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m523x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m523x_cpu_reset; mach_sched_init = hw_timer_init;
}
/***************************************************************************/
static int __init init_BSP(void)
{
m523x_fec_init(); m523x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m523x_qspi_init(); m523x_qspi_init();
#endif #endif
platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
return 0;
} }
arch_initcall(init_BSP);
/***************************************************************************/ /***************************************************************************/
arch/m68k/platform/5249/config.c
View file @ b57cb723
...@@ -12,34 +12,13 @@ ...@@ -12,34 +12,13 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h> #include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m5249_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5249_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5249_uart_platform,
};
#ifdef CONFIG_M5249C3 #ifdef CONFIG_M5249C3
static struct resource m5249_smc91x_resources[] = { static struct resource m5249_smc91x_resources[] = {
...@@ -64,153 +43,15 @@ static struct platform_device m5249_smc91x = { ...@@ -64,153 +43,15 @@ static struct platform_device m5249_smc91x = {
#endif /* CONFIG_M5249C3 */ #endif /* CONFIG_M5249C3 */
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) static struct platform_device *m5249_devices[] __initdata = {
static struct resource m5249_qspi_resources[] = { #ifdef CONFIG_M5249C3
{ &m5249_smc91x,
.start = MCFQSPI_IOBASE, #endif
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 29
#define MCFQSPI_CS1 24
#define MCFQSPI_CS2 21
#define MCFQSPI_CS3 22
static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m5249_cs_control = {
.setup = m5249_cs_setup,
.teardown = m5249_cs_teardown,
.select = m5249_cs_select,
.deselect = m5249_cs_deselect,
}; };
static struct mcfqspi_platform_data m5249_qspi_data = { /***************************************************************************/
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m5249_cs_control,
};
static struct platform_device m5249_qspi = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m5249_qspi_resources),
.resource = m5249_qspi_resources,
.dev.platform_data = &m5249_qspi_data,
};
static void __init m5249_qspi_init(void) static void __init m5249_qspi_init(void)
{ {
...@@ -219,42 +60,8 @@ static void __init m5249_qspi_init(void) ...@@ -219,42 +60,8 @@ static void __init m5249_qspi_init(void)
MCF_MBAR + MCFSIM_QSPIICR); MCF_MBAR + MCFSIM_QSPIICR);
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
static struct platform_device *m5249_devices[] __initdata = {
&m5249_uart,
#ifdef CONFIG_M5249C3
&m5249_smc91x,
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m5249_qspi,
#endif
};
/***************************************************************************/
static void __init m5249_uart_init_line(int line, int irq)
{
if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5249_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5249_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5249_uart_init_line(line, m5249_uart_platform[line].irq);
}
/***************************************************************************/ /***************************************************************************/
...@@ -276,43 +83,14 @@ static void __init m5249_smc91x_init(void) ...@@ -276,43 +83,14 @@ static void __init m5249_smc91x_init(void)
/***************************************************************************/ /***************************************************************************/
static void __init m5249_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5249_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m5249_cpu_reset; mach_sched_init = hw_timer_init;
m5249_timers_init();
m5249_uarts_init();
#ifdef CONFIG_M5249C3 #ifdef CONFIG_M5249C3
m5249_smc91x_init(); m5249_smc91x_init();
#endif #endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m5249_qspi_init(); m5249_qspi_init();
#endif #endif
} }
......
arch/m68k/platform/5272/config.c
View file @ b57cb723
...@@ -30,84 +30,18 @@ unsigned char ledbank = 0xff; ...@@ -30,84 +30,18 @@ unsigned char ledbank = 0xff;
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m5272_uart_platform[] = { static void __init m5272_uarts_init(void)
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = MCF_IRQ_UART1,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = MCF_IRQ_UART2,
},
{ },
};
static struct platform_device m5272_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5272_uart_platform,
};
static struct resource m5272_fec_resources[] = {
{
.start = MCF_MBAR + 0x840,
.end = MCF_MBAR + 0x840 + 0x1cf,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_ERX,
.end = MCF_IRQ_ERX,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_ETX,
.end = MCF_IRQ_ETX,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_ENTC,
.end = MCF_IRQ_ENTC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m5272_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m5272_fec_resources),
.resource = m5272_fec_resources,
};
static struct platform_device *m5272_devices[] __initdata = {
&m5272_uart,
&m5272_fec,
};
/***************************************************************************/
static void __init m5272_uart_init_line(int line, int irq)
{ {
u32 v; u32 v;
if ((line >= 0) && (line < 2)) { /* Enable the output lines for the serial ports */
/* Enable the output lines for the serial ports */ v = readl(MCF_MBAR + MCFSIM_PBCNT);
v = readl(MCF_MBAR + MCFSIM_PBCNT); v = (v & ~0x000000ff) | 0x00000055;
v = (v & ~0x000000ff) | 0x00000055; writel(v, MCF_MBAR + MCFSIM_PBCNT);
writel(v, MCF_MBAR + MCFSIM_PBCNT);
v = readl(MCF_MBAR + MCFSIM_PDCNT);
v = (v & ~0x000003fc) | 0x000002a8;
writel(v, MCF_MBAR + MCFSIM_PDCNT);
}
}
static void __init m5272_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5272_uart_platform);
int line;
for (line = 0; (line < nrlines); line++) v = readl(MCF_MBAR + MCFSIM_PDCNT);
m5272_uart_init_line(line, m5272_uart_platform[line].irq); v = (v & ~0x000003fc) | 0x000002a8;
writel(v, MCF_MBAR + MCFSIM_PDCNT);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -146,6 +80,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -146,6 +80,7 @@ void __init config_BSP(char *commandp, int size)
#endif #endif
mach_reset = m5272_cpu_reset; mach_reset = m5272_cpu_reset;
mach_sched_init = hw_timer_init;
} }
/***************************************************************************/ /***************************************************************************/
...@@ -167,7 +102,6 @@ static int __init init_BSP(void) ...@@ -167,7 +102,6 @@ static int __init init_BSP(void)
{ {
m5272_uarts_init(); m5272_uarts_init();
fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status); fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
return 0; return 0;
} }
......
arch/m68k/platform/527x/config.c
View file @ b57cb723
...@@ -16,253 +16,14 @@ ...@@ -16,253 +16,14 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m527x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
static struct platform_device m527x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m527x_uart_platform,
};
static struct resource m527x_fec0_resources[] = {
{
.start = MCFFEC_BASE0,
.end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct resource m527x_fec1_resources[] = {
{
.start = MCFFEC_BASE1,
.end = MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 128 + 23,
.end = 128 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 128 + 27,
.end = 128 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 128 + 29,
.end = 128 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m527x_fec[] = {
{
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m527x_fec0_resources),
.resource = m527x_fec0_resources,
},
{
.name = "fec",
.id = 1,
.num_resources = ARRAY_SIZE(m527x_fec1_resources),
.resource = m527x_fec1_resources,
},
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m527x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#if defined(CONFIG_M5271)
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#elif defined(CONFIG_M5275)
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m527x_cs_control = {
.setup = m527x_cs_setup,
.teardown = m527x_cs_teardown,
.select = m527x_cs_select,
.deselect = m527x_cs_deselect,
};
static struct mcfqspi_platform_data m527x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m527x_cs_control,
};
static struct platform_device m527x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m527x_qspi_resources),
.resource = m527x_qspi_resources,
.dev.platform_data = &m527x_qspi_data,
};
static void __init m527x_qspi_init(void) static void __init m527x_qspi_init(void)
{ {
...@@ -280,50 +41,23 @@ static void __init m527x_qspi_init(void) ...@@ -280,50 +41,23 @@ static void __init m527x_qspi_init(void)
writew(0x003e, MCFGPIO_PAR_QSPI); writew(0x003e, MCFGPIO_PAR_QSPI);
#endif #endif
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m527x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m527x_uart,
&m527x_fec[0],
#ifdef CONFIG_FEC2
&m527x_fec[1],
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m527x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m527x_uart_init_line(int line, int irq) static void __init m527x_uarts_init(void)
{ {
u16 sepmask; u16 sepmask;
if ((line < 0) || (line > 2))
return;
/* /*
* External Pin Mask Setting & Enable External Pin for Interface * External Pin Mask Setting & Enable External Pin for Interface
*/ */
sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
if (line == 0) sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
sepmask |= UART0_ENABLE_MASK;
else if (line == 1)
sepmask |= UART1_ENABLE_MASK;
else if (line == 2)
sepmask |= UART2_ENABLE_MASK;
writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART); writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
} }
static void __init m527x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m527x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m527x_uart_init_line(line, m527x_uart_platform[line].irq);
}
/***************************************************************************/ /***************************************************************************/
static void __init m527x_fec_init(void) static void __init m527x_fec_init(void)
...@@ -353,32 +87,14 @@ static void __init m527x_fec_init(void) ...@@ -353,32 +87,14 @@ static void __init m527x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m527x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m527x_cpu_reset; mach_sched_init = hw_timer_init;
m527x_uarts_init(); m527x_uarts_init();
m527x_fec_init(); m527x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m527x_qspi_init(); m527x_qspi_init();
#endif #endif
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
arch/m68k/platform/528x/config.c
View file @ b57cb723
...@@ -17,229 +17,33 @@ ...@@ -17,229 +17,33 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m528x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
},
{ },
};
static struct platform_device m528x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m528x_uart_platform,
};
static struct resource m528x_fec_resources[] = {
{
.start = MCFFEC_BASE,
.end = MCFFEC_BASE + MCFFEC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m528x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_fec_resources),
.resource = m528x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m528x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 147
#define MCFQSPI_CS1 148
#define MCFQSPI_CS2 149
#define MCFQSPI_CS3 150
static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
}
static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
}
static struct mcfqspi_cs_control m528x_cs_control = {
.setup = m528x_cs_setup,
.teardown = m528x_cs_teardown,
.select = m528x_cs_select,
.deselect = m528x_cs_deselect,
};
static struct mcfqspi_platform_data m528x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m528x_cs_control,
};
static struct platform_device m528x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_qspi_resources),
.resource = m528x_qspi_resources,
.dev.platform_data = &m528x_qspi_data,
};
static void __init m528x_qspi_init(void) static void __init m528x_qspi_init(void)
{ {
/* setup Port QS for QSPI with gpio CS control */ /* setup Port QS for QSPI with gpio CS control */
__raw_writeb(0x07, MCFGPIO_PQSPAR); __raw_writeb(0x07, MCFGPIO_PQSPAR);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m528x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m528x_uart,
&m528x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m528x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m528x_uart_init_line(int line, int irq) static void __init m528x_uarts_init(void)
{ {
u8 port; u8 port;
if ((line < 0) || (line > 2))
return;
/* make sure PUAPAR is set for UART0 and UART1 */ /* make sure PUAPAR is set for UART0 and UART1 */
if (line < 2) { port = readb(MCF5282_GPIO_PUAPAR);
port = readb(MCF5282_GPIO_PUAPAR); port |= 0x03 | (0x03 << 2);
port |= (0x03 << (line * 2)); writeb(port, MCF5282_GPIO_PUAPAR);
writeb(port, MCF5282_GPIO_PUAPAR);
}
}
static void __init m528x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m528x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m528x_uart_init_line(line, m528x_uart_platform[line].irq);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -256,14 +60,6 @@ static void __init m528x_fec_init(void) ...@@ -256,14 +60,6 @@ static void __init m528x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m528x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
#ifdef CONFIG_WILDFIRE #ifdef CONFIG_WILDFIRE
void wildfire_halt(void) void wildfire_halt(void)
{ {
...@@ -299,22 +95,12 @@ void __init config_BSP(char *commandp, int size) ...@@ -299,22 +95,12 @@ void __init config_BSP(char *commandp, int size)
#ifdef CONFIG_WILDFIREMOD #ifdef CONFIG_WILDFIREMOD
mach_halt = wildfiremod_halt; mach_halt = wildfiremod_halt;
#endif #endif
} mach_sched_init = hw_timer_init;
/***************************************************************************/
static int __init init_BSP(void)
{
mach_reset = m528x_cpu_reset;
m528x_uarts_init(); m528x_uarts_init();
m528x_fec_init(); m528x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m528x_qspi_init(); m528x_qspi_init();
#endif #endif
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
return 0;
} }
arch_initcall(init_BSP);
/***************************************************************************/ /***************************************************************************/
arch/m68k/platform/5307/config.c
View file @ b57cb723
...@@ -16,7 +16,6 @@ ...@@ -16,7 +16,6 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfwdebug.h> #include <asm/mcfwdebug.h>
/***************************************************************************/ /***************************************************************************/
...@@ -29,82 +28,6 @@ unsigned char ledbank = 0xff; ...@@ -29,82 +28,6 @@ unsigned char ledbank = 0xff;
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m5307_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5307_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5307_uart_platform,
};
static struct platform_device *m5307_devices[] __initdata = {
&m5307_uart,
};
/***************************************************************************/
static void __init m5307_uart_init_line(int line, int irq)
{
if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5307_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5307_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5307_uart_init_line(line, m5307_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m5307_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5307_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
#if defined(CONFIG_NETtel) || \ #if defined(CONFIG_NETtel) || \
...@@ -114,9 +37,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -114,9 +37,7 @@ void __init config_BSP(char *commandp, int size)
commandp[size-1] = 0; commandp[size-1] = 0;
#endif #endif
mach_reset = m5307_cpu_reset; mach_sched_init = hw_timer_init;
m5307_timers_init();
m5307_uarts_init();
/* Only support the external interrupts on their primary level */ /* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1); mcf_mapirq2imr(25, MCFINTC_EINT1);
...@@ -135,13 +56,3 @@ void __init config_BSP(char *commandp, int size) ...@@ -135,13 +56,3 @@ void __init config_BSP(char *commandp, int size)
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
arch/m68k/platform/532x/config.c
View file @ b57cb723
...@@ -21,214 +21,33 @@ ...@@ -21,214 +21,33 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfdma.h> #include <asm/mcfdma.h>
#include <asm/mcfwdebug.h> #include <asm/mcfwdebug.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m532x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
static struct platform_device m532x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m532x_uart_platform,
};
static struct resource m532x_fec_resources[] = {
{
.start = 0xfc030000,
.end = 0xfc0307ff,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 36,
.end = 64 + 36,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 40,
.end = 64 + 40,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 42,
.end = 64 + 42,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m532x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m532x_fec_resources),
.resource = m532x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m532x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 84
#define MCFQSPI_CS1 85
#define MCFQSPI_CS2 86
static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m532x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
}
static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
}
static struct mcfqspi_cs_control m532x_cs_control = {
.setup = m532x_cs_setup,
.teardown = m532x_cs_teardown,
.select = m532x_cs_select,
.deselect = m532x_cs_deselect,
};
static struct mcfqspi_platform_data m532x_qspi_data = {
.bus_num = 0,
.num_chipselect = 3,
.cs_control = &m532x_cs_control,
};
static struct platform_device m532x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m532x_qspi_resources),
.resource = m532x_qspi_resources,
.dev.platform_data = &m532x_qspi_data,
};
static void __init m532x_qspi_init(void) static void __init m532x_qspi_init(void)
{ {
/* setup QSPS pins for QSPI with gpio CS control */ /* setup QSPS pins for QSPI with gpio CS control */
writew(0x01f0, MCF_GPIO_PAR_QSPI); writew(0x01f0, MCF_GPIO_PAR_QSPI);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
static struct platform_device *m532x_devices[] __initdata = {
&m532x_uart,
&m532x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m532x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m532x_uart_init_line(int line, int irq)
{
if (line == 0) {
/* GPIO initialization */
MCF_GPIO_PAR_UART |= 0x000F;
} else if (line == 1) {
/* GPIO initialization */
MCF_GPIO_PAR_UART |= 0x0FF0;
}
}
static void __init m532x_uarts_init(void) static void __init m532x_uarts_init(void)
{ {
const int nrlines = ARRAY_SIZE(m532x_uart_platform); /* UART GPIO initialization */
int line; MCF_GPIO_PAR_UART |= 0x0FFF;
for (line = 0; (line < nrlines); line++)
m532x_uart_init_line(line, m532x_uart_platform[line].irq);
} }
/***************************************************************************/ /***************************************************************************/
static void __init m532x_fec_init(void) static void __init m532x_fec_init(void)
...@@ -242,14 +61,6 @@ static void __init m532x_fec_init(void) ...@@ -242,14 +61,6 @@ static void __init m532x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m532x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
#if !defined(CONFIG_BOOTPARAM) #if !defined(CONFIG_BOOTPARAM)
...@@ -263,6 +74,13 @@ void __init config_BSP(char *commandp, int size) ...@@ -263,6 +74,13 @@ void __init config_BSP(char *commandp, int size)
} }
#endif #endif
mach_sched_init = hw_timer_init;
m532x_uarts_init();
m532x_fec_init();
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m532x_qspi_init();
#endif
#ifdef CONFIG_BDM_DISABLE #ifdef CONFIG_BDM_DISABLE
/* /*
* Disable the BDM clocking. This also turns off most of the rest of * Disable the BDM clocking. This also turns off most of the rest of
...@@ -273,21 +91,6 @@ void __init config_BSP(char *commandp, int size) ...@@ -273,21 +91,6 @@ void __init config_BSP(char *commandp, int size)
#endif #endif
} }
/***************************************************************************/
static int __init init_BSP(void)
{
m532x_uarts_init();
m532x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
m532x_qspi_init();
#endif
platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/ /***************************************************************************/
/* Board initialization */ /* Board initialization */
/***************************************************************************/ /***************************************************************************/
......
arch/m68k/platform/5407/config.c
View file @ b57cb723
...@@ -16,91 +16,12 @@ ...@@ -16,91 +16,12 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
/***************************************************************************/
static struct mcf_platform_uart m5407_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5407_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5407_uart_platform,
};
static struct platform_device *m5407_devices[] __initdata = {
&m5407_uart,
};
/***************************************************************************/
static void __init m5407_uart_init_line(int line, int irq)
{
if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5407_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5407_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5407_uart_init_line(line, m5407_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m5407_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5407_cpu_reset(void)
{
local_irq_disable();
/* set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/ /***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m5407_cpu_reset; mach_sched_init = hw_timer_init;
m5407_timers_init();
m5407_uarts_init();
/* Only support the external interrupts on their primary level */ /* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1); mcf_mapirq2imr(25, MCFINTC_EINT1);
...@@ -110,13 +31,3 @@ void __init config_BSP(char *commandp, int size) ...@@ -110,13 +31,3 @@ void __init config_BSP(char *commandp, int size)
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
arch/m68k/platform/54xx/config.c
View file @ b57cb723
...@@ -27,64 +27,17 @@ ...@@ -27,64 +27,17 @@
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m54xx_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 64 + 35,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 64 + 34,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE3,
.irq = 64 + 33,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE4,
.irq = 64 + 32,
},
};
static struct platform_device m54xx_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m54xx_uart_platform,
};
static struct platform_device *m54xx_devices[] __initdata = {
&m54xx_uart,
};
/***************************************************************************/
static void __init m54xx_uart_init_line(int line, int irq)
{
int rts_cts;
/* enable io pins */
switch (line) {
case 0:
rts_cts = 0; break;
case 1:
rts_cts = MCF_PAR_PSC_RTS_RTS; break;
case 2:
rts_cts = MCF_PAR_PSC_RTS_RTS | MCF_PAR_PSC_CTS_CTS; break;
case 3:
rts_cts = 0; break;
}
__raw_writeb(MCF_PAR_PSC_TXD | rts_cts | MCF_PAR_PSC_RXD,
MCF_MBAR + MCF_PAR_PSC(line));
}
static void __init m54xx_uarts_init(void) static void __init m54xx_uarts_init(void)
{ {
const int nrlines = ARRAY_SIZE(m54xx_uart_platform); /* enable io pins */
int line; __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
MCF_MBAR + MCF_PAR_PSC(0));
for (line = 0; (line < nrlines); line++) __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
m54xx_uart_init_line(line, m54xx_uart_platform[line].irq); MCF_MBAR + MCF_PAR_PSC(1));
__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
MCF_PAR_PSC_CTS_CTS, MCF_MBAR + MCF_PAR_PSC(2));
__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
MCF_MBAR + MCF_PAR_PSC(3));
} }
/***************************************************************************/ /***************************************************************************/
...@@ -145,18 +98,8 @@ void __init config_BSP(char *commandp, int size) ...@@ -145,18 +98,8 @@ void __init config_BSP(char *commandp, int size)
mmu_context_init(); mmu_context_init();
#endif #endif
mach_reset = mcf54xx_reset; mach_reset = mcf54xx_reset;
mach_sched_init = hw_timer_init;
m54xx_uarts_init(); m54xx_uarts_init();
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m54xx_devices, ARRAY_SIZE(m54xx_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
arch/m68k/platform/68328/config.c
View file @ b57cb723
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/rtc.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/MC68328.h> #include <asm/MC68328.h>
...@@ -26,7 +27,7 @@ ...@@ -26,7 +27,7 @@
/***************************************************************************/ /***************************************************************************/
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); int m68328_hwclk(int set, struct rtc_time *t);
/***************************************************************************/ /***************************************************************************/
...@@ -48,7 +49,7 @@ void config_BSP(char *command, int len) ...@@ -48,7 +49,7 @@ void config_BSP(char *command, int len)
printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n"); printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n"); printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
mach_gettod = m68328_timer_gettod; mach_hwclk = m68328_hwclk;
mach_reset = m68328_reset; mach_reset = m68328_reset;
} }
......
arch/m68k/platform/68328/ints.c
View file @ b57cb723
...@@ -68,8 +68,6 @@ asmlinkage irqreturn_t inthandler5(void); ...@@ -68,8 +68,6 @@ asmlinkage irqreturn_t inthandler5(void);
asmlinkage irqreturn_t inthandler6(void); asmlinkage irqreturn_t inthandler6(void);
asmlinkage irqreturn_t inthandler7(void); asmlinkage irqreturn_t inthandler7(void);
extern e_vector *_ramvec;
/* The 68k family did not have a good way to determine the source /* The 68k family did not have a good way to determine the source
* of interrupts until later in the family. The EC000 core does * of interrupts until later in the family. The EC000 core does
* not provide the vector number on the stack, we vector everything * not provide the vector number on the stack, we vector everything
......
arch/m68k/platform/68328/timers.c
View file @ b57cb723
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/clocksource.h> #include <linux/clocksource.h>
#include <linux/rtc.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
...@@ -119,14 +120,17 @@ void hw_timer_init(void) ...@@ -119,14 +120,17 @@ void hw_timer_init(void)
/***************************************************************************/ /***************************************************************************/
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec) int m68328_hwclk(int set, struct rtc_time *t)
{ {
long now = RTCTIME; if (!set) {
long now = RTCTIME;
*year = *mon = *day = 1; t->tm_year = t->tm_mon = t->tm_mday = 1;
*hour = (now >> 24) % 24; t->tm_hour = (now >> 24) % 24;
*min = (now >> 16) % 60; t->tm_min = (now >> 16) % 60;
*sec = now % 60; t->tm_sec = now % 60;
}
return 0;
} }
/***************************************************************************/ /***************************************************************************/
arch/m68k/platform/68360/config.c
View file @ b57cb723
...@@ -103,11 +103,6 @@ void hw_timer_init(void) ...@@ -103,11 +103,6 @@ void hw_timer_init(void)
pquicc->timer_tgcr = tgcr_save; pquicc->timer_tgcr = tgcr_save;
} }
void BSP_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
}
int BSP_set_clock_mmss(unsigned long nowtime) int BSP_set_clock_mmss(unsigned long nowtime)
{ {
#if 0 #if 0
...@@ -181,6 +176,5 @@ void config_BSP(char *command, int len) ...@@ -181,6 +176,5 @@ void config_BSP(char *command, int len)
scc1_hwaddr = "\00\01\02\03\04\05"; scc1_hwaddr = "\00\01\02\03\04\05";
#endif #endif
mach_gettod = BSP_gettod; mach_reset = BSP_reset;
mach_reset = BSP_reset;
} }
arch/m68k/platform/68360/ints.c
View file @ b57cb723
...@@ -32,8 +32,6 @@ asmlinkage void trap(void); ...@@ -32,8 +32,6 @@ asmlinkage void trap(void);
asmlinkage void bad_interrupt(void); asmlinkage void bad_interrupt(void);
asmlinkage void inthandler(void); asmlinkage void inthandler(void);
extern void *_ramvec[];
static void intc_irq_unmask(struct irq_data *d) static void intc_irq_unmask(struct irq_data *d)
{ {
pquicc->intr_cimr |= (1 << d->irq); pquicc->intr_cimr |= (1 << d->irq);
......
arch/m68k/platform/68EZ328/config.c
View file @ b57cb723
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/rtc.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/machdep.h> #include <asm/machdep.h>
...@@ -25,7 +26,7 @@ ...@@ -25,7 +26,7 @@
/***************************************************************************/ /***************************************************************************/
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); int m68328_hwclk(int set, struct rtc_time *t);
/***************************************************************************/ /***************************************************************************/
...@@ -69,7 +70,7 @@ void config_BSP(char *command, int len) ...@@ -69,7 +70,7 @@ void config_BSP(char *command, int len)
else command[0] = 0; else command[0] = 0;
#endif #endif
mach_gettod = m68328_timer_gettod; mach_hwclk = m68328_hwclk;
mach_reset = m68ez328_reset; mach_reset = m68ez328_reset;
} }
......
arch/m68k/platform/68VZ328/config.c
View file @ b57cb723
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/rtc.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
...@@ -33,7 +34,7 @@ ...@@ -33,7 +34,7 @@
/***************************************************************************/ /***************************************************************************/
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); int m68328_hwclk(int set, struct rtc_time *t);
/***************************************************************************/ /***************************************************************************/
/* Init Drangon Engine hardware */ /* Init Drangon Engine hardware */
...@@ -181,7 +182,7 @@ void config_BSP(char *command, int size) ...@@ -181,7 +182,7 @@ void config_BSP(char *command, int size)
init_hardware(command, size); init_hardware(command, size);
mach_gettod = m68328_timer_gettod; mach_hwclk = m68328_hwclk;
mach_reset = m68vz328_reset; mach_reset = m68vz328_reset;
} }
......
arch/m68k/platform/coldfire/Makefile
View file @ b57cb723
...@@ -14,18 +14,18 @@ ...@@ -14,18 +14,18 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o dma.o entry.o vectors.o obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
obj-$(CONFIG_M5206) += timers.o intc.o obj-$(CONFIG_M5206) += timers.o intc.o reset.o
obj-$(CONFIG_M5206e) += timers.o intc.o obj-$(CONFIG_M5206e) += timers.o intc.o reset.o
obj-$(CONFIG_M520x) += pit.o intc-simr.o obj-$(CONFIG_M520x) += pit.o intc-simr.o reset.o
obj-$(CONFIG_M523x) += pit.o dma_timer.o intc-2.o obj-$(CONFIG_M523x) += pit.o dma_timer.o intc-2.o reset.o
obj-$(CONFIG_M5249) += timers.o intc.o obj-$(CONFIG_M5249) += timers.o intc.o reset.o
obj-$(CONFIG_M527x) += pit.o intc-2.o obj-$(CONFIG_M527x) += pit.o intc-2.o reset.o
obj-$(CONFIG_M5272) += timers.o obj-$(CONFIG_M5272) += timers.o
obj-$(CONFIG_M528x) += pit.o intc-2.o obj-$(CONFIG_M528x) += pit.o intc-2.o reset.o
obj-$(CONFIG_M5307) += timers.o intc.o obj-$(CONFIG_M5307) += timers.o intc.o reset.o
obj-$(CONFIG_M532x) += timers.o intc-simr.o obj-$(CONFIG_M532x) += timers.o intc-simr.o reset.o
obj-$(CONFIG_M5407) += timers.o intc.o obj-$(CONFIG_M5407) += timers.o intc.o reset.o
obj-$(CONFIG_M54xx) += sltimers.o intc-2.o obj-$(CONFIG_M54xx) += sltimers.o intc-2.o
obj-y += pinmux.o gpio.o obj-y += pinmux.o gpio.o
......
arch/m68k/platform/coldfire/device.c 0 → 100644
View file @ b57cb723
/*
* device.c -- common ColdFire SoC device support
*
* (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/traps.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/*
* All current ColdFire parts contain from 2, 3 or 4 UARTS.
*/
static struct mcf_platform_uart mcf_uart_platform_data[] = {
{
.mapbase = MCFUART_BASE0,
.irq = MCF_IRQ_UART0,
},
{
.mapbase = MCFUART_BASE1,
.irq = MCF_IRQ_UART1,
},
#ifdef MCFUART_BASE2
{
.mapbase = MCFUART_BASE2,
.irq = MCF_IRQ_UART2,
},
#endif
#ifdef MCFUART_BASE3
{
.mapbase = MCFUART_BASE3,
.irq = MCF_IRQ_UART3,
},
#endif
{ },
};
static struct platform_device mcf_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = mcf_uart_platform_data,
};
#ifdef CONFIG_FEC
/*
* Some ColdFire cores contain the Fast Ethernet Controller (FEC)
* block. It is Freescale's own hardware block. Some ColdFires
* have 2 of these.
*/
static struct resource mcf_fec0_resources[] = {
{
.start = MCFFEC_BASE0,
.end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_FECRX0,
.end = MCF_IRQ_FECRX0,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECTX0,
.end = MCF_IRQ_FECTX0,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECENTC0,
.end = MCF_IRQ_FECENTC0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_fec0 = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_fec0_resources),
.resource = mcf_fec0_resources,
};
#ifdef MCFFEC_BASE1
static struct resource mcf_fec1_resources[] = {
{
.start = MCFFEC_BASE1,
.end = MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_FECRX1,
.end = MCF_IRQ_FECRX1,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECTX1,
.end = MCF_IRQ_FECTX1,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECENTC1,
.end = MCF_IRQ_FECENTC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_fec1 = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
.resource = mcf_fec1_resources,
};
#endif /* MCFFEC_BASE1 */
#endif /* CONFIG_FEC */
#ifdef CONFIG_SPI_COLDFIRE_QSPI
/*
* The ColdFire QSPI module is an SPI protocol hardware block used
* on a number of different ColdFire CPUs.
*/
static struct resource mcf_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
#ifdef MCFQSPI_CS3
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
gpio_free(MCFQSPI_CS3);
goto fail3;
}
#endif
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
#ifdef MCFQSPI_CS3
gpio_free(MCFQSPI_CS3);
#endif
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
#ifdef MCFQSPI_CS3
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
#endif
}
}
static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
#ifdef MCFQSPI_CS3
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
#endif
}
}
static struct mcfqspi_cs_control mcf_cs_control = {
.setup = mcf_cs_setup,
.teardown = mcf_cs_teardown,
.select = mcf_cs_select,
.deselect = mcf_cs_deselect,
};
static struct mcfqspi_platform_data mcf_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &mcf_cs_control,
};
static struct platform_device mcf_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_qspi_resources),
.resource = mcf_qspi_resources,
.dev.platform_data = &mcf_qspi_data,
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
#ifdef CONFIG_FEC
&mcf_fec0,
#ifdef MCFFEC_BASE1
&mcf_fec1,
#endif
#endif
#ifdef CONFIG_SPI_COLDFIRE_QSPI
&mcf_qspi,
#endif
};
/*
* Some ColdFire UARTs let you set the IRQ line to use.
*/
static void __init mcf_uart_set_irq(void)
{
#ifdef MCFUART_UIVR
/* UART0 interrupt setup */
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
/* UART1 interrupt setup */
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
#endif
}
static int __init mcf_init_devices(void)
{
mcf_uart_set_irq();
platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
return 0;
}
arch_initcall(mcf_init_devices);
arch/m68k/platform/coldfire/head.S
View file @ b57cb723
...@@ -158,6 +158,10 @@ _start: ...@@ -158,6 +158,10 @@ _start:
#if defined(CONFIG_UBOOT) #if defined(CONFIG_UBOOT)
movel %sp,_init_sp /* save initial stack pointer */ movel %sp,_init_sp /* save initial stack pointer */
#endif #endif
#ifdef CONFIG_MBAR
movel #CONFIG_MBAR+1,%d0 /* configured MBAR address */
movec %d0,%MBAR /* set it */
#endif
/* /*
* Do any platform or board specific setup now. Most boards * Do any platform or board specific setup now. Most boards
......
arch/m68k/platform/coldfire/pit.c
View file @ b57cb723
...@@ -149,7 +149,7 @@ static struct clocksource pit_clk = { ...@@ -149,7 +149,7 @@ static struct clocksource pit_clk = {
/***************************************************************************/ /***************************************************************************/
void hw_timer_init(void) void hw_timer_init(irq_handler_t handler)
{ {
cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id()); cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32); cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
......
arch/m68k/platform/coldfire/reset.c 0 → 100644
View file @ b57cb723
/*
* reset.c -- common ColdFire SoC reset support
*
* (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
/*
* There are 2 common methods amongst the ColdFure parts for reseting
* the CPU. But there are couple of exceptions, the 5272 and the 547x
* have something completely special to them, and we let their specific
* subarch code handle them.
*/
#ifdef MCFSIM_SYPCR
static void mcf_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
#endif
#ifdef MCF_RCR
static void mcf_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
}
#endif
static int __init mcf_setup_reset(void)
{
mach_reset = mcf_cpu_reset;
return 0;
}
arch_initcall(mcf_setup_reset);
arch/m68k/platform/coldfire/sltimers.c
View file @ b57cb723
...@@ -81,12 +81,14 @@ void mcfslt_profile_init(void) ...@@ -81,12 +81,14 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy; static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt; static u32 mcfslt_cnt;
static irq_handler_t timer_interrupt;
static irqreturn_t mcfslt_tick(int irq, void *dummy) static irqreturn_t mcfslt_tick(int irq, void *dummy)
{ {
/* Reset Slice Timer 0 */ /* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR)); __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy; mcfslt_cnt += mcfslt_cycles_per_jiffy;
return arch_timer_interrupt(irq, dummy); return timer_interrupt(irq, dummy);
} }
static struct irqaction mcfslt_timer_irq = { static struct irqaction mcfslt_timer_irq = {
...@@ -121,7 +123,7 @@ static struct clocksource mcfslt_clk = { ...@@ -121,7 +123,7 @@ static struct clocksource mcfslt_clk = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS, .flags = CLOCK_SOURCE_IS_CONTINUOUS,
}; };
void hw_timer_init(void) void hw_timer_init(irq_handler_t handler)
{ {
mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ; mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
/* /*
...@@ -136,6 +138,7 @@ void hw_timer_init(void) ...@@ -136,6 +138,7 @@ void hw_timer_init(void)
/* initialize mcfslt_cnt knowing that slice timers count down */ /* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy; mcfslt_cnt = mcfslt_cycles_per_jiffy;
timer_interrupt = handler;
setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq); setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK); clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
......
arch/m68k/platform/coldfire/timers.c
View file @ b57cb723
...@@ -47,6 +47,27 @@ void coldfire_profile_init(void); ...@@ -47,6 +47,27 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy; static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt; static u32 mcftmr_cnt;
static irq_handler_t timer_interrupt;
/***************************************************************************/
static void init_timer_irq(void)
{
#ifdef MCFSIM_ICR_AUTOVEC
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
#endif /* MCFSIM_ICR_AUTOVEC */
}
/***************************************************************************/ /***************************************************************************/
static irqreturn_t mcftmr_tick(int irq, void *dummy) static irqreturn_t mcftmr_tick(int irq, void *dummy)
...@@ -55,7 +76,7 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy) ...@@ -55,7 +76,7 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER)); __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy; mcftmr_cnt += mcftmr_cycles_per_jiffy;
return arch_timer_interrupt(irq, dummy); return timer_interrupt(irq, dummy);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -94,7 +115,7 @@ static struct clocksource mcftmr_clk = { ...@@ -94,7 +115,7 @@ static struct clocksource mcftmr_clk = {
/***************************************************************************/ /***************************************************************************/
void hw_timer_init(void) void hw_timer_init(irq_handler_t handler)
{ {
__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
mcftmr_cycles_per_jiffy = FREQ / HZ; mcftmr_cycles_per_jiffy = FREQ / HZ;
...@@ -110,6 +131,8 @@ void hw_timer_init(void) ...@@ -110,6 +131,8 @@ void hw_timer_init(void)
clocksource_register_hz(&mcftmr_clk, FREQ); clocksource_register_hz(&mcftmr_clk, FREQ);
timer_interrupt = handler;
init_timer_irq();
setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq); setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
#ifdef CONFIG_HIGHPROFILE #ifdef CONFIG_HIGHPROFILE
......
arch/m68k/platform/coldfire/vectors.c
View file @ b57cb723
...@@ -33,8 +33,6 @@ asmlinkage void dbginterrupt_c(struct frame *fp) ...@@ -33,8 +33,6 @@ asmlinkage void dbginterrupt_c(struct frame *fp)
/***************************************************************************/ /***************************************************************************/
extern e_vector *_ramvec;
/* Assembler routines */ /* Assembler routines */
asmlinkage void buserr(void); asmlinkage void buserr(void);
asmlinkage void trap(void); asmlinkage void trap(void);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7