[PATCH] ppc32: add "indirect" DCR access, pass 2

From: Matt Porter <mporter@kernel.crashing.org>

DCR number is encoded in mfdcr/mtdcr command itself and this prevents easy
DCR access when register number is not known on compile time.  This patch
adds __mfdcr & __mtdcr helpers which use pre-generated mfdcr/mtdcr
sequences for all possible DCR numbers.  We also use GCC extension
__builtin_constant_p to optimize cases when DCR number is in fact known
during compilation.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/syslib/Makefile

@@ -72,3 +72,5 @@ obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
 endif
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_MPC10X_BRIDGE)     += mpc10x_common.o indirect_pci.o
+obj-$(CONFIG_40x)		+= dcr.o
+obj-$(CONFIG_BOOKE)		+= dcr.o

arch/ppc/syslib/dcr.S

+/*
+ * arch/ppc/syslib/dcr.S
+ *
+ * "Indirect" DCR access
+ *
+ * Copyright (c) 2004 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+#define DCR_ACCESS_PROLOG(table) \
+	rlwinm  r3,r3,4,18,27;   \
+	lis     r5,table@h;      \
+	ori     r5,r5,table@l;   \
+	add     r3,r3,r5;        \
+	mtctr   r3;              \
+	bctr
+
+_GLOBAL(__mfdcr)
+	DCR_ACCESS_PROLOG(__mfdcr_table)
+
+_GLOBAL(__mtdcr)
+	DCR_ACCESS_PROLOG(__mtdcr_table)
+
+__mfdcr_table:
+	mfdcr  r3,0; blr
+__mtdcr_table:
+	mtdcr  0,r4; blr
+
+dcr     = 1
+        .rept   1023
+	mfdcr   r3,dcr; blr
+	mtdcr   dcr,r4; blr
+	dcr     = dcr + 1
+	.endr

include/asm-ppc/reg_booke.h

@@ -11,19 +11,24 @@
 
 #ifndef __ASSEMBLY__
 /* Device Control Registers */
-#define mfdcr(rn) mfdcr_or_dflt(rn, 0)
-#define mfdcr_or_dflt(rn,default_rval)					\
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn)						\
 	({unsigned int rval;					\
-	if (rn == 0)							\
-		rval = default_rval;					\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mfdcr %0," __stringify(rn)	\
+		              : "=r" (rval));			\
 	else							\
-		asm volatile("mfdcr %0," __stringify(rn) : "=r" (rval)); \
+		rval = __mfdcr(rn);				\
 	rval;})
 
 #define mtdcr(rn, v)						\
 do {								\
-	if (rn != 0)							\
-		asm volatile("mtdcr " __stringify(rn) ",%0" : : "r" (v)); \
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mtdcr " __stringify(rn) ",%0"	\
+			      : : "r" (v)); 			\
+	else							\
+		__mtdcr(rn, v);					\
 } while (0)
 
 /* R/W of indirect DCRs make use of standard naming conventions for DCRs */