prctl: Add speculation control prctls

Add two new prctls to control aspects of speculation related vulnerabilites
and their mitigations to provide finer grained control over performance
impacting mitigations.

PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
which is selected with arg2 of prctl(2). The return value uses bit 0-2 with
the following meaning:

Bit  Define           Description
0    PR_SPEC_PRCTL    Mitigation can be controlled per task by
                      PR_SET_SPECULATION_CTRL
1    PR_SPEC_ENABLE   The speculation feature is enabled, mitigation is
                      disabled
2    PR_SPEC_DISABLE  The speculation feature is disabled, mitigation is
                      enabled

If all bits are 0 the CPU is not affected by the speculation misfeature.

If PR_SPEC_PRCTL is set, then the per task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.

PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
is selected by arg2 of prctl(2) per task. arg3 is used to hand in the
control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE.

The common return values are:

EINVAL  prctl is not implemented by the architecture or the unused prctl()
        arguments are not 0
ENODEV  arg2 is selecting a not supported speculation misfeature

PR_SET_SPECULATION_CTRL has these additional return values:

ERANGE  arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE
ENXIO   prctl control of the selected speculation misfeature is disabled

The first supported controlable speculation misfeature is
PR_SPEC_STORE_BYPASS. Add the define so this can be shared between
architectures.

Based on an initial patch from Tim Chen and mostly rewritten.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Documentation/userspace-api/index.rst

@@ -19,6 +19,7 @@ place where this information is gathered.
    no_new_privs
    seccomp_filter
    unshare
+   spec_ctrl
 
 .. only::  subproject and html
 

Documentation/userspace-api/spec_ctrl.rst

+===================
+Speculation Control
+===================
+
+Quite some CPUs have speculation related misfeatures which are in fact
+vulnerabilites causing data leaks in various forms even accross privilege
+domains.
+
+The kernel provides mitigation for such vulnerabilities in various
+forms. Some of these mitigations are compile time configurable and some on
+the kernel command line.
+
+There is also a class of mitigations which are very expensive, but they can
+be restricted to a certain set of processes or tasks in controlled
+environments. The mechanism to control these mitigations is via
+:manpage:`prctl(2)`.
+
+There are two prctl options which are related to this:
+
+ * PR_GET_SPECULATION_CTRL
+
+ * PR_SET_SPECULATION_CTRL
+
+PR_GET_SPECULATION_CTRL
+-----------------------
+
+PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
+which is selected with arg2 of prctl(2). The return value uses bits 0-2 with
+the following meaning:
+
+==== ================ ===================================================
+Bit  Define           Description
+==== ================ ===================================================
+0    PR_SPEC_PRCTL    Mitigation can be controlled per task by
+                      PR_SET_SPECULATION_CTRL
+1    PR_SPEC_ENABLE   The speculation feature is enabled, mitigation is
+                      disabled
+2    PR_SPEC_DISABLE  The speculation feature is disabled, mitigation is
+                      enabled
+==== ================ ===================================================
+
+If all bits are 0 the CPU is not affected by the speculation misfeature.
+
+If PR_SPEC_PRCTL is set, then the per task control of the mitigation is
+available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
+misfeature will fail.
+
+PR_SET_SPECULATION_CTRL
+-----------------------
+PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
+is selected by arg2 of :manpage:`prctl(2)` per task. arg3 is used to hand
+in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE.
+
+Common error codes
+------------------
+======= =================================================================
+Value   Meaning
+======= =================================================================
+EINVAL  The prctl is not implemented by the architecture or unused
+        prctl(2) arguments are not 0
+
+ENODEV  arg2 is selecting a not supported speculation misfeature
+======= =================================================================
+
+PR_SET_SPECULATION_CTRL error codes
+-----------------------------------
+======= =================================================================
+Value   Meaning
+======= =================================================================
+0       Success
+
+ERANGE  arg3 is incorrect, i.e. it's neither PR_SPEC_ENABLE nor
+        PR_SPEC_DISABLE
+
+ENXIO   Control of the selected speculation misfeature is not possible.
+        See PR_GET_SPECULATION_CTRL.
+======= =================================================================
+
+Speculation misfeature controls
+-------------------------------
+- PR_SPEC_STORE_BYPASS: Speculative Store Bypass
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);

include/linux/nospec.h

@@ -55,4 +55,9 @@ static inline unsigned long array_index_mask_nospec(unsigned long index,
 									\
 	(typeof(_i)) (_i & _mask);					\
 })
+
+/* Speculation control prctl */
+int arch_prctl_spec_ctrl_get(unsigned long which);
+int arch_prctl_spec_ctrl_set(unsigned long which, unsigned long ctrl);
+
 #endif /* _LINUX_NOSPEC_H */

include/uapi/linux/prctl.h

@@ -207,4 +207,15 @@ struct prctl_mm_map {
 # define PR_SVE_VL_LEN_MASK		0xffff
 # define PR_SVE_VL_INHERIT		(1 << 17) /* inherit across exec */
 
+/* Per task speculation control */
+#define PR_GET_SPECULATION_CTRL		52
+#define PR_SET_SPECULATION_CTRL		53
+/* Speculation control variants */
+# define PR_SPEC_STORE_BYPASS		0
+/* Return and control values for PR_SET/GET_SPECULATION_CTRL */
+# define PR_SPEC_NOT_AFFECTED		0
+# define PR_SPEC_PRCTL			(1UL << 0)
+# define PR_SPEC_ENABLE			(1UL << 1)
+# define PR_SPEC_DISABLE		(1UL << 2)
+
 #endif /* _LINUX_PRCTL_H */

kernel/sys.c

@@ -61,6 +61,8 @@
 #include <linux/uidgid.h>
 #include <linux/cred.h>
 
+#include <linux/nospec.h>
+
 #include <linux/kmsg_dump.h>
 /* Move somewhere else to avoid recompiling? */
 #include <generated/utsrelease.h>
@@ -2242,6 +2244,16 @@ static int propagate_has_child_subreaper(struct task_struct *p, void *data)
 	return 1;
 }
 
+int __weak arch_prctl_spec_ctrl_get(unsigned long which)
+{
+	return -EINVAL;
+}
+
+int __weak arch_prctl_spec_ctrl_set(unsigned long which, unsigned long ctrl)
+{
+	return -EINVAL;
+}
+
 SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 		unsigned long, arg4, unsigned long, arg5)
 {
@@ -2450,6 +2462,16 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 	case PR_SVE_GET_VL:
 		error = SVE_GET_VL();
 		break;
+	case PR_GET_SPECULATION_CTRL:
+		if (arg3 || arg4 || arg5)
+			return -EINVAL;
+		error = arch_prctl_spec_ctrl_get(arg2);
+		break;
+	case PR_SET_SPECULATION_CTRL:
+		if (arg4 || arg5)
+			return -EINVAL;
+		error = arch_prctl_spec_ctrl_set(arg2, arg3);
+		break;
 	default:
 		error = -EINVAL;
 		break;