dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema

The Allwinner A80 SoCs have a USB PHY controller that is used by Linux,
with a matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    anyOf:
+      - description: Main PHY Clock
+
+      - items:
+          - description: Main PHY clock
+          - description: HSIC 12MHz clock
+          - description: HSIC 480MHz clock
+
+  clock-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic_12M
+          - const: hsic_480M
+
+  resets:
+    anyOf:
+      - description: Normal USB PHY reset
+
+      - items:
+          - description: Normal USB PHY reset
+          - description: HSIC Reset
+
+  reset-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic
+
+  phy_type:
+    const: hsic
+    description:
+      When absent, the PHY type will be assumed to be normal USB.
+
+  phy-supply:
+    description:
+      Regulator that powers VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+if:
+  properties:
+    phy_type:
+      const: hsic
+
+  required:
+    - phy_type
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 2
+
+    reset-names:
+      maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy1: phy@a00800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a00800 0x4>;
+        clocks = <&usb_clocks CLK_USB0_PHY>;
+        clock-names = "phy";
+        resets = <&usb_clocks RST_USB0_PHY>;
+        reset-names = "phy";
+        phy-supply = <&reg_usb1_vbus>;
+        #phy-cells = <0>;
+    };
+
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy3: phy@a02800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a02800 0x4>;
+        clocks = <&usb_clocks CLK_USB2_PHY>,
+                 <&usb_clocks CLK_USB_HSIC>,
+                 <&usb_clocks CLK_USB2_HSIC>;
+        clock-names = "phy",
+                      "hsic_12M",
+                      "hsic_480M";
+        resets = <&usb_clocks RST_USB2_PHY>,
+                 <&usb_clocks RST_USB2_HSIC>;
+        reset-names = "phy",
+                      "hsic";
+        phy_type = "hsic";
+        phy-supply = <&reg_usb3_vbus>;
+        #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt

-Allwinner sun9i USB PHY
------------------------
-
-Required properties:
-- compatible : should be one of
-  * allwinner,sun9i-a80-usb-phy
-- reg : a list of offset + length pairs
-- #phy-cells : from the generic phy bindings, must be 0
-- phy_type : "hsic" for HSIC usage;
-	     other values or absence of this property indicates normal USB
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names : depending on the "phy_type" property,
-  * "phy" for normal USB
-  * "hsic_480M", "hsic_12M" for HSIC
-- resets : a list of phandle + reset specifier pairs
-- reset-names : depending on the "phy_type" property,
-  * "phy" for normal USB
-  * "hsic" for HSIC
-
-Optional Properties:
-- phy-supply : from the generic phy bindings, a phandle to a regulator that
-	       provides power to VBUS.
-
-It is recommended to list all clocks and resets available.
-The driver will only use those matching the phy_type.
-
-Example:
-	usbphy1: phy@a01800 {
-		compatible = "allwinner,sun9i-a80-usb-phy";
-		reg = <0x00a01800 0x4>;
-		clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
-		       <&usb_phy_clk 3>;
-		clock-names = "hsic_480M", "hsic_12M", "phy";
-		resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
-		reset-names = "hsic", "phy";
-		#phy-cells = <0>;
-	};