DVB (2445): Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support.

- Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>

drivers/media/dvb/frontends/Kconfig

@@ -16,6 +16,12 @@ config DVB_CX24110
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
+config DVB_CX24123
+	tristate "Conexant CX24123 based"
+	depends on DVB_CORE
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
 config DVB_TDA8083
 	tristate "Philips TDA8083 based"
 	depends on DVB_CORE

drivers/media/dvb/frontends/Makefile

@@ -32,3 +32,4 @@ obj-$(CONFIG_DVB_OR51132) += or51132.o
 obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
 obj-$(CONFIG_DVB_S5H1420) += s5h1420.o
 obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o
+obj-$(CONFIG_DVB_CX24123) += cx24123.o

drivers/media/dvb/frontends/cx24123.c

+/*
+    Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
+
+    Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+#include "dvb_frontend.h"
+#include "cx24123.h"
+
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) printk (KERN_DEBUG "cx24123: " args); \
+	} while (0)
+
+struct cx24123_state {
+
+	struct i2c_adapter* i2c;
+	struct dvb_frontend_ops ops;
+	const struct cx24123_config* config;
+
+	struct dvb_frontend frontend;
+
+	u32 lastber;
+	u16 snr;
+	u8  lnbreg;
+
+	/* Some PLL specifics for tuning */
+	u32 VCAarg;
+	u32 VGAarg;
+	u32 bandselectarg;
+	u32 pllarg;
+
+	/* The Demod/Tuner can't easily provide these, we cache them */
+	u32 currentfreq;
+	u32 currentsymbolrate;
+};
+
+static struct {
+	u8 reg;
+	u8 data;
+} cx24123_regdata[] =
+{
+	{0x00, 0x03}, /* Reset system */
+	{0x00, 0x00}, /* Clear reset */
+	{0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
+	{0x03, 0x07},
+	{0x04, 0x10},
+	{0x05, 0x04},
+	{0x06, 0x31},
+	{0x0d, 0x02},
+	{0x0e, 0x03},
+	{0x0f, 0xfe},
+	{0x10, 0x01},
+	{0x14, 0x01},
+	{0x15, 0x98},
+	{0x16, 0x00},
+	{0x17, 0x01},
+	{0x1b, 0x05},
+	{0x1c, 0x80},
+	{0x1d, 0x00},
+	{0x1e, 0x00},
+	{0x20, 0x41},
+	{0x21, 0x15},
+	{0x27, 0x14},
+	{0x28, 0x46},
+	{0x29, 0x00},
+	{0x2a, 0xb0},
+	{0x2b, 0x73},
+	{0x2c, 0x00},
+	{0x2d, 0x00},
+	{0x2e, 0x00},
+	{0x2f, 0x00},
+	{0x30, 0x00},
+	{0x31, 0x00},
+	{0x32, 0x8c},
+	{0x33, 0x00},
+	{0x34, 0x00},
+	{0x35, 0x03},
+	{0x36, 0x02},
+	{0x37, 0x3a},
+	{0x3a, 0x00},	/* Enable AGC accumulator */
+	{0x44, 0x00},
+	{0x45, 0x00},
+	{0x46, 0x05},
+	{0x56, 0x41},
+	{0x57, 0xff},
+	{0x67, 0x83},
+};
+
+static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
+	int err;
+
+	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+		printk("%s: writereg error(err == %i, reg == 0x%02x,"
+			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	/* fixme: put the intersil addr int the config */
+	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
+	int err;
+
+	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+		printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
+			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	/* cache the write, no way to read back */
+	state->lnbreg = data;
+
+	return 0;
+}
+
+static int cx24123_readreg(struct cx24123_state* state, u8 reg)
+{
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+	struct i2c_msg msg[] = {
+		{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
+		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+
+	if (ret != 2) {
+		printk("%s: reg=0x%x (error=%d)\n", __FUNCTION__, reg, ret);
+		return ret;
+	}
+
+	return b1[0];
+}
+
+static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg)
+{
+	return state->lnbreg;
+}
+
+static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
+{
+	switch (inversion) {
+	case INVERSION_OFF:
+		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
+		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		break;
+	case INVERSION_ON:
+		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
+		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		break;
+	case INVERSION_AUTO:
+		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_inversion_t *inversion)
+{
+	u8 val;
+
+	val = cx24123_readreg(state, 0x1b) >> 7;
+
+	if (val == 0)
+		*inversion=INVERSION_OFF;
+	else
+		*inversion=INVERSION_ON;
+
+	return 0;
+}
+
+static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
+{
+	if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
+		fec=FEC_AUTO;
+
+	/* Hardware has 5/11 and 3/5 but are never unused */
+	switch (fec) {
+	case FEC_NONE:
+		return cx24123_writereg(state, 0x0f,0x01);
+	case FEC_1_2:
+		return cx24123_writereg(state, 0x0f, 0x02);
+	case FEC_2_3:
+		return cx24123_writereg(state, 0x0f, 0x04);
+	case FEC_3_4:
+		return cx24123_writereg(state, 0x0f, 0x08);
+	case FEC_5_6:
+		return cx24123_writereg(state, 0x0f, 0x20);
+	case FEC_7_8:
+		return cx24123_writereg(state, 0x0f, 0x80);
+	case FEC_AUTO:
+		return cx24123_writereg(state, 0x0f, 0xae);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
+{
+	u8 val;
+
+	val = cx24123_readreg (state, 0x1b) & 0x07;
+	switch (val) {
+	case 1:
+		*fec=FEC_1_2;
+		return 0;
+	case 3:
+		*fec=FEC_2_3;
+		return 0;
+	case 4:
+		*fec=FEC_3_4;
+		return 0;
+	case 5:
+		*fec=FEC_4_5;
+		return 0;
+	case 6:
+		*fec=FEC_5_6;
+		return 0;
+	case 7:
+		*fec=FEC_7_8;
+		return 0;
+	case 2:	/* *fec=FEC_3_5; return 0; */
+	case 0:	/* *fec=FEC_5_11; return 0; */
+		*fec=FEC_AUTO;
+		return 0;
+	default:
+		*fec=FEC_NONE; return 0;
+	}
+
+	return -EREMOTEIO;
+}
+
+/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
+{
+	u32 val;
+
+	val = (srate/1185)*100;
+
+	/* Compensate for scaling up, by removing 17 symbols per 1Msps */
+	val = val - (17*(srate / 1000000));
+
+	cx24123_writereg(state, 0x08, (val >>16) & 0xff );
+	cx24123_writereg(state, 0x09, (val >> 8) & 0xff );
+	cx24123_writereg(state, 0x0a, (val     ) & 0xff );
+
+	return 0;
+}
+
+/*
+ * Based on the required frequency and symbolrate, the tuner AGC has to be configured
+ * and the correct band selected. Calculate those values
+ */
+static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	u32 ndiv=0, adiv=0, vco_div=0;
+	int i=0;
+
+	/* Defaults for low freq, low rate */
+	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
+	state->VGAarg = cx24123_AGC_vals[0].VGAprogdata;
+	state->bandselectarg = cx24123_bandselect_vals[0].progdata;
+	vco_div = cx24123_bandselect_vals[0].VCOdivider;
+
+	/* For the given symbolerate, determine the VCA and VGA programming bits */
+	for (i=0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
+	{
+		if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
+				(cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+			state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
+			state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+		}
+	}
+
+	/* For the given frequency, determine the bandselect programming bits */
+	for (i=0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+	{
+		if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+				(cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
+			state->bandselectarg = cx24123_bandselect_vals[i].progdata;
+			vco_div = cx24123_bandselect_vals[i].VCOdivider;
+		}
+	}
+
+	/* Determine the N/A dividers for the requested lband freq (in kHz). */
+	/* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
+	ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
+	adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+
+	if (adiv == 0)
+		adiv++;
+
+	/* determine the correct pll frequency values. */
+	/* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
+	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
+	state->pllarg |= (ndiv << 5) | adiv;
+
+	return 0;
+}
+
+/*
+ * Tuner data is 21 bits long, must be left-aligned in data.
+ * Tuner cx24109 is written through a dedicated 3wire interface on the demod chip.
+ */
+static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_parameters *p, u32 data)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+
+	u8 timeout=0;
+
+	/* align the 21 bytes into to bit23 boundary */
+	data = data << 3;
+
+	/* Reset the demod pll word length to 0x15 bits */
+	cx24123_writereg(state, 0x21, 0x15);
+
+	timeout=0;
+	/* write the msb 8 bits, wait for the send to be completed */
+	cx24123_writereg(state, 0x22, (data>>16) & 0xff);
+	while ( ( cx24123_readreg(state, 0x20) & 0x40 ) == 0 )
+	{
+		/* Safety - No reason why the write should not complete, and we never get here, avoid hang */
+		if (timeout++ >= 4) {
+			printk("%s:  demodulator is no longer responding, aborting.\n",__FUNCTION__);
+			return -EREMOTEIO;
+		}
+		msleep(500);
+	}
+
+	timeout=0;
+	/* send another 8 bytes, wait for the send to be completed */
+	cx24123_writereg(state, 0x22, (data>>8) & 0xff );
+	while ( (cx24123_readreg(state, 0x20) & 0x40 ) == 0 )
+	{
+		/* Safety - No reason why the write should not complete, and we never get here, avoid hang */
+		if (timeout++ >= 4) {
+			printk("%s:  demodulator is not responding, possibly hung, aborting.\n",__FUNCTION__);
+			return -EREMOTEIO;
+		}
+		msleep(500);
+	}
+
+	timeout=0;
+	/* send the lower 5 bits of this byte, padded with 3 LBB, wait for the send to be completed */
+	cx24123_writereg(state, 0x22, (data) & 0xff );
+	while ((cx24123_readreg(state, 0x20) & 0x80))
+	{
+		/* Safety - No reason why the write should not complete, and we never get here, avoid hang */
+		if (timeout++ >= 4) {
+			printk("%s:  demodulator is not responding, possibly hung, aborting.\n",__FUNCTION__);
+			return -EREMOTEIO;
+		}
+		msleep(500);
+	}
+
+	/* Trigger the demod to configure the tuner */
+	cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2);
+	cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd);
+
+	return 0;
+}
+
+static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+
+	if (cx24123_pll_calculate(fe, p)!=0) {
+		printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
+		return -EINVAL;
+	}
+
+	/* Write the new VCO/VGA */
+	cx24123_pll_writereg(fe, p, state->VCAarg);
+	cx24123_pll_writereg(fe, p, state->VGAarg);
+
+	/* Write the new bandselect and pll args */
+	cx24123_pll_writereg(fe, p, state->bandselectarg);
+	cx24123_pll_writereg(fe, p, state->pllarg);
+
+	return 0;
+}
+
+static int cx24123_initfe(struct dvb_frontend* fe)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	int i;
+
+	/* Configure the demod to a good set of defaults */
+	for (i=0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
+		cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
+
+	if (state->config->pll_init)
+		state->config->pll_init(fe);
+
+	/* Configure the LNB for 14V */
+	cx24123_writelnbreg(state, 0x0, 0x2a);
+
+	return 0;
+}
+
+static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	u8 val;
+
+	val = cx24123_readlnbreg(state, 0x0);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
+	case SEC_VOLTAGE_18:
+		return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
+	case SEC_VOLTAGE_OFF:
+		return cx24123_writelnbreg(state, 0x0, val & 0x30);
+	default:
+		return -EINVAL;
+	};
+}
+
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
+						struct dvb_diseqc_master_cmd *cmd)
+{
+	/* fixme: Implement diseqc */
+	printk("%s: No support yet\n",__FUNCTION__);
+
+	return -ENOTSUPP;
+}
+
+static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+
+	int sync = cx24123_readreg(state, 0x14);
+	int lock = cx24123_readreg(state, 0x20);
+
+	*status = 0;
+	if (lock & 0x01)
+		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+	if (sync & 0x04)
+		*status |= FE_HAS_VITERBI;
+	if (sync & 0x08)
+		*status |= FE_HAS_CARRIER;
+	if (sync & 0x80)
+		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+	return 0;
+}
+
+/*
+ * Configured to return the measurement of errors in blocks, because no UCBLOCKS value
+ * is available, so this value doubles up to satisfy both measurements
+ */
+static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+
+	state->lastber =
+		((cx24123_readreg(state, 0x1c) & 0x3f) << 16) |
+		(cx24123_readreg(state, 0x1d) << 8 |
+		cx24123_readreg(state, 0x1e));
+
+	/* Do the signal quality processing here, it's derived from the BER. */
+	/* Scale the BER from a 24bit to a SNR 16 bit where higher = better */
+	if (state->lastber < 5000)
+		state->snr = 655*100;
+	else if ( (state->lastber >=   5000) && (state->lastber <  55000) )
+		state->snr = 655*90;
+	else if ( (state->lastber >=  55000) && (state->lastber < 150000) )
+		state->snr = 655*80;
+	else if ( (state->lastber >= 150000) && (state->lastber < 250000) )
+		state->snr = 655*70;
+	else if ( (state->lastber >= 250000) && (state->lastber < 450000) )
+		state->snr = 655*65;
+	else
+		state->snr = 0;
+
+	*ber = state->lastber;
+
+	return 0;
+}
+
+static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
+
+	return 0;
+}
+
+static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	*snr = state->snr;
+
+	return 0;
+}
+
+static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	*ucblocks = state->lastber;
+
+	return 0;
+}
+
+static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+
+	if (state->config->set_ts_params)
+		state->config->set_ts_params(fe, 0);
+
+	state->currentfreq=p->frequency;
+	state->currentsymbolrate=p->u.qpsk.symbol_rate;
+
+	cx24123_set_inversion(state, p->inversion);
+	cx24123_set_fec(state, p->u.qpsk.fec_inner);
+	cx24123_set_symbolrate(state, p->u.qpsk.symbol_rate);
+	cx24123_pll_tune(fe, p);
+
+	/* Enable automatic aquisition and reset cycle */
+	cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07) );
+	cx24123_writereg(state, 0x00, 0x10);
+	cx24123_writereg(state, 0x00, 0);
+
+	return 0;
+}
+
+static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+
+	if (cx24123_get_inversion(state, &p->inversion) != 0) {
+		printk("%s: Failed to get inversion status\n",__FUNCTION__);
+		return -EREMOTEIO;
+	}
+	if (cx24123_get_fec(state, &p->u.qpsk.fec_inner) != 0) {
+		printk("%s: Failed to get fec status\n",__FUNCTION__);
+		return -EREMOTEIO;
+	}
+	p->frequency = state->currentfreq;
+	p->u.qpsk.symbol_rate = state->currentsymbolrate;
+
+	return 0;
+}
+
+static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	u8 val;
+
+	val = cx24123_readlnbreg(state, 0x0);
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		return cx24123_writelnbreg(state, 0x0, val | 0x10);
+	case SEC_TONE_OFF:
+		return cx24123_writelnbreg(state, 0x0, val & 0x2f);
+	default:
+		printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
+		return -EINVAL;
+	}
+}
+
+static void cx24123_release(struct dvb_frontend* fe)
+{
+	struct cx24123_state* state = fe->demodulator_priv;
+	dprintk("%s\n",__FUNCTION__);
+	kfree(state);
+}
+
+static struct dvb_frontend_ops cx24123_ops;
+
+struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, struct i2c_adapter* i2c)
+{
+	struct cx24123_state* state = NULL;
+	int ret;
+
+	dprintk("%s\n",__FUNCTION__);
+
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct cx24123_state), GFP_KERNEL);
+	if (state == NULL) {
+		printk("Unable to kmalloc\n");
+		goto error;
+	}
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &cx24123_ops, sizeof(struct dvb_frontend_ops));
+	state->lastber = 0;
+	state->snr = 0;
+	state->lnbreg = 0;
+	state->VCAarg = 0;
+	state->VGAarg = 0;
+	state->bandselectarg = 0;
+	state->pllarg = 0;
+	state->currentfreq = 0;
+	state->currentsymbolrate = 0;
+
+	/* check if the demod is there */
+	ret = cx24123_readreg(state, 0x00);
+	if ((ret != 0xd1) && (ret != 0xe1)) {
+		printk("Version != d1 or e1\n");
+		goto error;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+
+	return NULL;
+}
+
+static struct dvb_frontend_ops cx24123_ops = {
+
+	.info = {
+		.name = "Conexant CX24123/CX24109",
+		.type = FE_QPSK,
+		.frequency_min = 950000,
+		.frequency_max = 2150000,
+		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
+		.frequency_tolerance = 29500,
+		.symbol_rate_min = 1000000,
+		.symbol_rate_max = 45000000,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_RECOVER
+	},
+
+	.release = cx24123_release,
+
+	.init = cx24123_initfe,
+	.set_frontend = cx24123_set_frontend,
+	.get_frontend = cx24123_get_frontend,
+	.read_status = cx24123_read_status,
+	.read_ber = cx24123_read_ber,
+	.read_signal_strength = cx24123_read_signal_strength,
+	.read_snr = cx24123_read_snr,
+	.read_ucblocks = cx24123_read_ucblocks,
+	.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+	.set_tone = cx24123_set_tone,
+	.set_voltage = cx24123_set_voltage,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(cx24123_attach);
+

drivers/media/dvb/frontends/cx24123.h

+/*
+    Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
+
+    Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef CX24123_H
+#define CX24123_H
+
+#include <linux/dvb/frontend.h>
+
+struct cx24123_config
+{
+	/* the demodulator's i2c address */
+	u8 demod_address;
+
+	/* PLL maintenance */
+	int (*pll_init)(struct dvb_frontend* fe);
+	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
+
+	/* Need to set device param for start_dma */
+	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+};
+
+/* Various tuner defaults need to be established for a given symbol rate Sps */
+struct
+{
+	u32 symbolrate_low;
+	u32 symbolrate_high;
+	u32 VCAslope;
+	u32 VCAoffset;
+	u32 VGA1offset;
+	u32 VGA2offset;
+	u32 VCAprogdata;
+	u32 VGAprogdata;
+} cx24123_AGC_vals[] =
+{
+	{
+		.symbolrate_low		= 1000000,
+		.symbolrate_high	= 4999999,
+		.VCAslope		= 0x07,
+		.VCAoffset		= 0x0f,
+		.VGA1offset		= 0x1f8,
+		.VGA2offset		= 0x1f8,
+		.VGAprogdata		= (2 << 18) | (0x1f8 << 9) | 0x1f8,
+		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x07,
+	},
+	{
+		.symbolrate_low		=  5000000,
+		.symbolrate_high	= 14999999,
+		.VCAslope		= 0x1f,
+		.VCAoffset		= 0x1f,
+		.VGA1offset		= 0x1e0,
+		.VGA2offset		= 0x180,
+		.VGAprogdata		= (2 << 18) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x1f,
+	},
+	{
+		.symbolrate_low		= 15000000,
+		.symbolrate_high	= 45000000,
+		.VCAslope		= 0x3f,
+		.VCAoffset		= 0x3f,
+		.VGA1offset		= 0x180,
+		.VGA2offset		= 0x100,
+		.VGAprogdata		= (2 << 18) | (0x100 << 9) | 0x180,
+		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x3f,
+	},
+};
+
+/*
+ * Various tuner defaults need to be established for a given frequency kHz.
+ * fixme: The bounds on the bands do not match the doc in real life.
+ * fixme: Some of them have been moved, other might need adjustment.
+ */
+struct
+{
+	u32 freq_low;
+	u32 freq_high;
+	u32 bandselect;
+	u32 VCOdivider;
+	u32 VCOnumber;
+	u32 progdata;
+} cx24123_bandselect_vals[] =
+{
+	{
+		.freq_low	= 950000,
+		.freq_high	= 1018999,
+		.bandselect	= 0x40,
+		.VCOdivider	= 4,
+		.VCOnumber	= 7,
+		.progdata	= (0 << 18) | (0 << 9) | 0x40,
+	},
+	{
+		.freq_low	= 1019000,
+		.freq_high	= 1074999,
+		.bandselect	= 0x80,
+		.VCOdivider	= 4,
+		.VCOnumber	= 8,
+		.progdata	= (0 << 18) | (0 << 9) | 0x80,
+	},
+	{
+		.freq_low	= 1075000,
+		.freq_high	= 1227999,
+		.bandselect	= 0x01,
+		.VCOdivider	= 2,
+		.VCOnumber	= 1,
+		.progdata	= (0 << 18) | (1 << 9) | 0x01,
+	},
+	{
+		.freq_low	= 1228000,
+		.freq_high	= 1349999,
+		.bandselect	= 0x02,
+		.VCOdivider	= 2,
+		.VCOnumber	= 2,
+		.progdata	= (0 << 18) | (1 << 9) | 0x02,
+	},
+	{
+		.freq_low	= 1350000,
+		.freq_high	= 1481999,
+		.bandselect	= 0x04,
+		.VCOdivider	= 2,
+		.VCOnumber	= 3,
+		.progdata	= (0 << 18) | (1 << 9) | 0x04,
+	},
+	{
+		.freq_low	= 1482000,
+		.freq_high	= 1595999,
+		.bandselect	= 0x08,
+		.VCOdivider	= 2,
+		.VCOnumber	= 4,
+		.progdata	= (0 << 18) | (1 << 9) | 0x08,
+	},
+	{
+		.freq_low	= 1596000,
+		.freq_high	= 1717999,
+		.bandselect	= 0x10,
+		.VCOdivider	= 2,
+		.VCOnumber	= 5,
+		.progdata	= (0 << 18) | (1 << 9) | 0x10,
+	},
+	{
+		.freq_low	= 1718000,
+		.freq_high	= 1855999,
+		.bandselect	= 0x20,
+		.VCOdivider	= 2,
+		.VCOnumber	= 6,
+		.progdata	= (0 << 18) | (1 << 9) | 0x20,
+	},
+	{
+		.freq_low	= 1856000,
+		.freq_high	= 2035999,
+		.bandselect	= 0x40,
+		.VCOdivider	= 2,
+		.VCOnumber	= 7,
+		.progdata	= (0 << 18) | (1 << 9) | 0x40,
+	},
+	{
+		.freq_low	= 2036000,
+		.freq_high	= 2149999,
+		.bandselect	= 0x80,
+		.VCOdivider	= 2,
+		.VCOnumber	= 8,
+		.progdata	= (0 << 18) | (1 << 9) | 0x80,
+	},
+};
+
+extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
+					   struct i2c_adapter* i2c);
+
+#endif /* CX24123_H */
+