[media] it913x Support it9135 Verions 2 chip

Support for version 2 type chips and other LNA versions of version 1

Scripts may be compressed slightly at a later stage.

TODO
Firmware loader
However, things are a little confusing,  it is not clear that
dvb-usb-it9137-01.fw does not work with version 2 chips
as in recent files both firmwares are the same.

Should be applied to: 8133 Support for single ITE 9135 device.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/it913x.c

@@ -60,15 +60,6 @@ struct it913x_state {
 	u8 id;
 };
 
-struct ite_config {
-	u8 chip_ver;
-	u16 chip_type;
-	u32 firmware;
-	u8 tuner_id_0;
-	u8 tuner_id_1;
-	u8 dual_mode;
-};
-
 struct ite_config it913x_config;
 
 static int it913x_bulk_write(struct usb_device *dev,
@@ -390,8 +381,8 @@ static int it913x_identify_state(struct usb_device *udev,
 			if (ret != 0)
 				ret = it913x_wr_reg(udev, DEV_0,
 					GPIOH1_O, 0x0);
-		}
 			props->num_adapters = 2;
+		}
 	} else
 		props->num_adapters = 1;
 
@@ -474,13 +465,18 @@ static int it913x_download_firmware(struct usb_device *udev,
 	/* Tuner function */
 	if (it913x_config.dual_mode)
 		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
+	else
+		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0x68);
 
+	if ((it913x_config.chip_ver == 1) &&
+		(it913x_config.chip_type == 0x9135)) {
 		ret |= it913x_wr_reg(udev, DEV_0,  PADODPU, 0x0);
 		ret |= it913x_wr_reg(udev, DEV_0,  AGC_O_D, 0x0);
 		if (it913x_config.dual_mode) {
 			ret |= it913x_wr_reg(udev, DEV_1,  PADODPU, 0x0);
 			ret |= it913x_wr_reg(udev, DEV_1,  AGC_O_D, 0x0);
 		}
+	}
 
 	return (ret < 0) ? -ENODEV : 0;
 }
@@ -501,31 +497,13 @@ static int it913x_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	struct usb_device *udev = adap->dev->udev;
 	int ret = 0;
-	u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
 	u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
 	u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize;
-	u8 tuner_id, tuner_type;
 
-	if (adap->id == 0)
-		tuner_id = it913x_config.tuner_id_0;
-	else
-		tuner_id = it913x_config.tuner_id_1;
-
-	/* TODO we always use IT9137 possible references here*/
-	/* Documentation suggests don't care */
-	switch (tuner_id) {
-	case 0x51:
-	case 0x52:
-	case 0x60:
-	case 0x61:
-	case 0x62:
-	default:
-	case 0x38:
-		tuner_type = IT9137;
-	}
+	it913x_config.adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
 
 	adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
-		&adap->dev->i2c_adap, adap_addr, adf, tuner_type);
+		&adap->dev->i2c_adap, adap_addr, &it913x_config);
 
 	if (adap->id == 0 && adap->fe_adap[0].fe) {
 		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
@@ -698,5 +676,5 @@ module_exit(it913x_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.07");
+MODULE_VERSION("1.08");
 MODULE_LICENSE("GPL");

drivers/media/dvb/frontends/it913x-fe.c

@@ -50,6 +50,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
 struct it913x_fe_state {
 	struct dvb_frontend frontend;
 	struct i2c_adapter *i2c_adap;
+	struct ite_config *config;
 	u8 i2c_addr;
 	u32 frequency;
 	u8 adf;
@@ -211,6 +212,9 @@ static int it913x_init_tuner(struct it913x_fe_state *state)
 	state->tun_fn_min /= (state->tun_fdiv * nv_val);
 	deb_info("Tuner fn_min %d", state->tun_fn_min);
 
+	if (state->config->chip_ver > 1)
+		msleep(50);
+	else {
 		for (i = 0; i < 50; i++) {
 			reg = it913x_read_reg_u8(state, 0xec82);
 			if (reg > 0)
@@ -219,6 +223,7 @@ static int it913x_init_tuner(struct it913x_fe_state *state)
 				return -ENODEV;
 			udelay(2000);
 		}
+	}
 
 	return it913x_write_reg(state, PRO_DMOD, 0xed81, val);
 }
@@ -578,7 +583,12 @@ static int it913x_fe_set_frontend(struct dvb_frontend *fe,
 
 	deb_info("Frontend Set Tuner Type %02x", state->tuner_type);
 	switch (state->tuner_type) {
-	case IT9137: /* Tuner type 0x38 */
+	case IT9135_38:
+	case IT9135_51:
+	case IT9135_52:
+	case IT9135_60:
+	case IT9135_61:
+	case IT9135_62:
 		ret = it9137_set_tuner(state,
 			p->u.ofdm.bandwidth, p->frequency);
 		break;
@@ -678,13 +688,14 @@ static u32 compute_div(u32 a, u32 b, u32 x)
 
 static int it913x_fe_start(struct it913x_fe_state *state)
 {
-	struct it913xset *set_fe;
+	struct it913xset *set_lna;
 	struct it913xset *set_mode;
 	int ret;
-	u8 adf = (state->adf & 0xf);
+	u8 adf = (state->config->adf & 0xf);
 	u32 adc, xtal;
 	u8 b[4];
 
+	if (state->config->chip_ver == 1)
 		ret = it913x_init_tuner(state);
 
 	if (adf < 12) {
@@ -720,23 +731,57 @@ static int it913x_fe_start(struct it913x_fe_state *state)
 	b[1] = (adc >> 8) & 0xff;
 	b[2] = (adc >> 16) & 0xff;
 	ret |= it913x_write(state, PRO_DMOD, ADC_FREQ, b, 3);
+	if (ret < 0)
+		return -ENODEV;
+
+	/* v1 or v2 tuner script */
+	if (state->config->chip_ver > 1)
+		ret = it913x_fe_script_loader(state, it9135_v2);
+	else
+		ret = it913x_fe_script_loader(state, it9135_v1);
+	if (ret < 0)
+		return ret;
 
+	/* LNA Scripts */
 	switch (state->tuner_type) {
-	case IT9137: /* Tuner type 0x38 */
-		set_fe = it9137_set;
+	case IT9135_51:
+		set_lna = it9135_51;
+		break;
+	case IT9135_52:
+		set_lna = it9135_52;
 		break;
+	case IT9135_60:
+		set_lna = it9135_60;
+		break;
+	case IT9135_61:
+		set_lna = it9135_61;
+		break;
+	case IT9135_62:
+		set_lna = it9135_62;
+		break;
+	case IT9135_38:
 	default:
-		return -EINVAL;
+		set_lna = it9135_38;
+	}
+	ret = it913x_fe_script_loader(state, set_lna);
+	if (ret < 0)
+		return ret;
+
+	if (state->config->chip_ver == 2) {
+		ret = it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x1);
+		ret |= it913x_write_reg(state, PRO_LINK, PADODPU, 0x0);
+		ret |= it913x_write_reg(state, PRO_LINK, AGC_O_D, 0x0);
+		ret |= it913x_init_tuner(state);
 	}
+	if (ret < 0)
+		return -ENODEV;
 
-	/* set the demod */
-	ret = it913x_fe_script_loader(state, set_fe);
 	/* Always solo frontend */
 	set_mode = set_solo_fe;
 	ret |= it913x_fe_script_loader(state, set_mode);
 
 	ret |= it913x_fe_suspend(state);
-	return 0;
+	return (ret < 0) ? -ENODEV : 0;
 }
 
 static int it913x_fe_init(struct dvb_frontend *fe)
@@ -750,13 +795,7 @@ static int it913x_fe_init(struct dvb_frontend *fe)
 
 	ret |= it913x_fe_script_loader(state, init_1);
 
-	switch (state->tuner_type) {
-	case IT9137:
 	ret |= it913x_write_reg(state, PRO_DMOD, 0xfba8, 0x0);
-		break;
-	default:
-		return -EINVAL;
-	}
 
 	return (ret < 0) ? -ENODEV : 0;
 }
@@ -770,19 +809,34 @@ static void it913x_fe_release(struct dvb_frontend *fe)
 static struct dvb_frontend_ops it913x_fe_ofdm_ops;
 
 struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,
-		u8 i2c_addr, u8 adf, u8 type)
+		u8 i2c_addr, struct ite_config *config)
 {
 	struct it913x_fe_state *state = NULL;
 	int ret;
+
 	/* allocate memory for the internal state */
 	state = kzalloc(sizeof(struct it913x_fe_state), GFP_KERNEL);
 	if (state == NULL)
+		return NULL;
+	if (config == NULL)
 		goto error;
 
 	state->i2c_adap = i2c_adap;
 	state->i2c_addr = i2c_addr;
-	state->adf = adf;
-	state->tuner_type = type;
+	state->config = config;
+
+	switch (state->config->tuner_id_0) {
+	case IT9135_51:
+	case IT9135_52:
+	case IT9135_60:
+	case IT9135_61:
+	case IT9135_62:
+		state->tuner_type = state->config->tuner_id_0;
+		break;
+	default:
+	case IT9135_38:
+		state->tuner_type = IT9135_38;
+	}
 
 	ret = it913x_fe_start(state);
 	if (ret < 0)
@@ -835,5 +889,5 @@ static struct dvb_frontend_ops it913x_fe_ofdm_ops = {
 
 MODULE_DESCRIPTION("it913x Frontend and it9137 tuner");
 MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
-MODULE_VERSION("1.07");
+MODULE_VERSION("1.08");
 MODULE_LICENSE("GPL");

drivers/media/dvb/frontends/it913x-fe.h

@@ -23,13 +23,25 @@
 
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
+
+struct ite_config {
+	u8 chip_ver;
+	u16 chip_type;
+	u32 firmware;
+	u8 tuner_id_0;
+	u8 tuner_id_1;
+	u8 dual_mode;
+	u8 adf;
+};
+
 #if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \
 defined(MODULE))
 extern struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,
-			u8 i2c_addr, u8 adf, u8 type);
+			u8 i2c_addr, struct ite_config *config);
 #else
 static inline struct dvb_frontend *it913x_fe_attach(
-		struct i2c_adapter *i2c_adap,	u8 i2c_addr, u8 adf, u8 type)
+		struct i2c_adapter *i2c_adap,
+			u8 i2c_addr, struct ite_config *config)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
@@ -144,8 +156,14 @@ static inline struct dvb_frontend *it913x_fe_attach(
 #define EST_SIGNAL_LEVEL	0x004a
 #define FREE_BAND		0x004b
 #define SUSPEND_FLAG		0x004c
-/* Build in tuners */
+/* Build in tuner types */
 #define IT9137 0x38
+#define IT9135_38 0x38
+#define IT9135_51 0x50
+#define IT9135_52 0x52
+#define IT9135_60 0x60
+#define IT9135_61 0x61
+#define IT9135_62 0x62
 
 enum {
 	CMD_DEMOD_READ = 0,