Commit b904d713 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris:
  CRIS: Don't use mask_irq as symbol name
  CRIS: Simplify param.h by simply including <asm-generic/param.h>
  CRISv10: Whitespace fixes for hw_settings.S
  CRISv10: Trivial fixes.
  CRISv32: Fix RS485 port 4 CD Kconfig item.
  CRISv32: Remove duplicated Kconfig items.
  cris: push down BKL into some device drivers
parents 2e8949f0 4150764f
......@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
#include <linux/bcd.h>
#include <linux/capability.h>
......@@ -238,9 +239,7 @@ static unsigned char days_in_mo[] =
/* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
static int
rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg)
static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
......@@ -354,6 +353,17 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
}
}
static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret;
lock_kernel();
ret = rtc_ioctl(file, cmd, arg);
unlock_kernel();
return ret;
}
static void
print_rtc_status(void)
{
......@@ -376,7 +386,7 @@ print_rtc_status(void)
static const struct file_operations rtc_fops = {
.owner = THIS_MODULE,
.ioctl = rtc_ioctl,
.unlocked_ioctl = rtc_unlocked_ioctl,
};
/* Probe for the chip by writing something to its RAM and try reading it back. */
......
......@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/bcd.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
......@@ -53,7 +54,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
/* Cache VL bit value read at driver init since writing the RTC_SECOND
* register clears the VL status.
......@@ -62,7 +63,7 @@ static int voltage_low;
static const struct file_operations pcf8563_fops = {
.owner = THIS_MODULE,
.ioctl = pcf8563_ioctl,
.unlocked_ioctl = pcf8563_unlocked_ioctl,
};
unsigned char
......@@ -212,8 +213,7 @@ pcf8563_exit(void)
* ioctl calls for this driver. Why return -ENOTTY upon error? Because
* POSIX says so!
*/
int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
unsigned long arg)
static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
/* Some sanity checks. */
if (_IOC_TYPE(cmd) != RTC_MAGIC)
......@@ -339,6 +339,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
return 0;
}
static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
int ret;
lock_kernel();
return pcf8563_ioctl(filp, cmd, arg);
unlock_kernel();
return ret;
}
static int __init pcf8563_register(void)
{
if (pcf8563_init() < 0) {
......
......@@ -17,8 +17,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
/* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
* global just so that the kernel gdb can use it.
......@@ -116,12 +116,12 @@ static unsigned int startup_crisv10_irq(unsigned int irq)
static void enable_crisv10_irq(unsigned int irq)
{
unmask_irq(irq);
crisv10_unmask_irq(irq);
}
static void disable_crisv10_irq(unsigned int irq)
{
mask_irq(irq);
crisv10_mask_irq(irq);
}
static void ack_crisv10_irq(unsigned int irq)
......
/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $
*
/*
* memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
*/
......@@ -14,7 +13,7 @@ void *dma_memcpy(void *pdst,
{
static etrax_dma_descr indma, outdma;
D(printk("dma_memcpy %d bytes... ", pn));
D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn));
#if 0
*R_GEN_CONFIG = genconfig_shadow =
......@@ -33,10 +32,10 @@ void *dma_memcpy(void *pdst,
*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ;
D(printk("done\n"));
while (*R_DMA_CH7_CMD == 1)
/* wait for completion */;
D(printk(KERN_DEBUG "done\n"));
}
......
/*
* $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
*
* This table is used by some tools to extract hardware parameters.
* The table should be included in the kernel and the decompressor.
* Don't forget to update the tools if you change this table.
......
......@@ -360,24 +360,10 @@ config ETRAX_SER4_DSR_BIT
string "Ser 4 DSR bit (empty = not used)"
depends on ETRAX_SERIAL_PORT4
config ETRAX_SER3_CD_BIT
config ETRAX_SER4_CD_BIT
string "Ser 4 CD bit (empty = not used)"
depends on ETRAX_SERIAL_PORT4
config ETRAX_RS485
bool "RS-485 support"
depends on ETRAXFS_SERIAL
help
Enables support for RS-485 serial communication. For a primer on
RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
config ETRAX_RS485_DISABLE_RECEIVER
bool "Disable serial receiver"
depends on ETRAX_RS485
help
It is necessary to disable the serial receiver to avoid serial
loopback. Not all products are able to do this in software only.
config ETRAX_SYNCHRONOUS_SERIAL
bool "Synchronous serial-port support"
depends on ETRAX_ARCH_V32
......
......@@ -649,10 +649,10 @@ i2c_release(struct inode *inode, struct file *filp)
/* Main device API. ioctl's to write or read to/from i2c registers.
*/
static int
i2c_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
static long
i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret;
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -ENOTTY;
}
......@@ -665,9 +665,13 @@ i2c_ioctl(struct inode *inode, struct file *file,
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
return i2c_writereg(I2C_ARGSLAVE(arg),
lock_kernel();
ret = i2c_writereg(I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg));
unlock_kernel();
return ret;
case I2C_READREG:
{
unsigned char val;
......@@ -675,7 +679,9 @@ i2c_ioctl(struct inode *inode, struct file *file,
D(printk("i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
lock_kernel();
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
unlock_kernel();
D(printk("= %d\n", val));
return val;
}
......@@ -689,7 +695,7 @@ i2c_ioctl(struct inode *inode, struct file *file,
static const struct file_operations i2c_fops = {
.owner = THIS_MODULE,
.ioctl = i2c_ioctl,
.unlocked_ioctl = i2c_ioctl,
.open = i2c_open,
.release = i2c_release,
};
......
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/bcd.h>
#include <linux/mutex.h>
......@@ -49,7 +50,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
/* Cache VL bit value read at driver init since writing the RTC_SECOND
* register clears the VL status.
......@@ -58,7 +59,7 @@ static int voltage_low;
static const struct file_operations pcf8563_fops = {
.owner = THIS_MODULE,
.ioctl = pcf8563_ioctl
.unlocked_ioctl = pcf8563_unlocked_ioctl,
};
unsigned char
......@@ -208,8 +209,7 @@ pcf8563_exit(void)
* ioctl calls for this driver. Why return -ENOTTY upon error? Because
* POSIX says so!
*/
int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
unsigned long arg)
static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
/* Some sanity checks. */
if (_IOC_TYPE(cmd) != RTC_MAGIC)
......@@ -335,6 +335,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
return 0;
}
static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
int ret;
lock_kernel();
return pcf8563_ioctl(filp, cmd, arg);
unlock_kernel();
return ret;
}
static int __init pcf8563_register(void)
{
if (pcf8563_init() < 0) {
......
......@@ -24,5 +24,5 @@ EXPORT_SYMBOL(crisv32_io_get_name);
EXPORT_SYMBOL(crisv32_io_get);
/* Functions masking/unmasking interrupts */
EXPORT_SYMBOL(mask_irq);
EXPORT_SYMBOL(unmask_irq);
EXPORT_SYMBOL(crisv32_mask_irq);
EXPORT_SYMBOL(crisv32_unmask_irq);
......@@ -280,8 +280,7 @@ static int irq_cpu(int irq)
return cpu;
}
void
mask_irq(int irq)
void crisv32_mask_irq(int irq)
{
int cpu;
......@@ -289,8 +288,7 @@ mask_irq(int irq)
block_irq(irq, cpu);
}
void
unmask_irq(int irq)
void crisv32_unmask_irq(int irq)
{
unblock_irq(irq, irq_cpu(irq));
}
......@@ -298,23 +296,23 @@ unmask_irq(int irq)
static unsigned int startup_crisv32_irq(unsigned int irq)
{
unmask_irq(irq);
crisv32_unmask_irq(irq);
return 0;
}
static void shutdown_crisv32_irq(unsigned int irq)
{
mask_irq(irq);
crisv32_mask_irq(irq);
}
static void enable_crisv32_irq(unsigned int irq)
{
unmask_irq(irq);
crisv32_unmask_irq(irq);
}
static void disable_crisv32_irq(unsigned int irq)
{
mask_irq(irq);
crisv32_mask_irq(irq);
}
static void ack_crisv32_irq(unsigned int irq)
......
......@@ -168,8 +168,8 @@ void __init smp_callin(void)
/* Enable IRQ and idle */
REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
unmask_irq(IPI_INTR_VECT);
unmask_irq(TIMER0_INTR_VECT);
crisv32_unmask_irq(IPI_INTR_VECT);
crisv32_unmask_irq(TIMER0_INTR_VECT);
preempt_disable();
notify_cpu_starting(cpu);
local_irq_enable();
......
......@@ -93,7 +93,8 @@ void set_break_vector(int n, irqvectptr addr);
"push $r10\n\t" /* push orig_r10 */ \
"clear.d [$sp=$sp-4]\n\t" /* frametype - this is a normal stackframe */
/* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
/* BLOCK_IRQ and UNBLOCK_IRQ do the same as
* crisv10_mask_irq and crisv10_unmask_irq */
#define BLOCK_IRQ(mask,nr) \
"move.d " #mask ",$r0\n\t" \
......
......@@ -23,8 +23,8 @@ struct etrax_interrupt_vector {
extern struct etrax_interrupt_vector *etrax_irv; /* head.S */
void mask_irq(int irq);
void unmask_irq(int irq);
void crisv32_mask_irq(int irq);
void crisv32_unmask_irq(int irq);
void set_exception_vector(int n, irqvectptr addr);
......
......@@ -2,22 +2,9 @@
#define _ASMCRIS_PARAM_H
/* Currently we assume that HZ=100 is good for CRIS. */
#ifdef __KERNEL__
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
#ifndef HZ
#define HZ 100
#endif
#define EXEC_PAGESIZE 8192
#ifndef NOGROUP
#define NOGROUP (-1)
#endif
#define MAXHOSTNAMELEN 64 /* max length of hostname */
#include <asm-generic/param.h>
#endif
#endif /* _ASMCRIS_PARAM_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment