b43legacy: LED triggers support

Drive the LEDs through the generic LED triggers.

The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy.
Signed-off-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43legacy/Kconfig

@@ -34,6 +34,12 @@ config B43LEGACY_PCICORE_AUTOSELECT
 	select SSB_DRIVER_PCICORE
 	default y
 
+# LED support
+config B43LEGACY_LEDS
+	bool
+	depends on MAC80211_LEDS
+	default y
+
 config B43LEGACY_DEBUG
 	bool "Broadcom 43xx-legacy debugging"
 	depends on B43LEGACY

drivers/net/wireless/b43legacy/Makefile

-obj-$(CONFIG_B43LEGACY) += b43legacy.o
-b43legacy-obj-$(CONFIG_B43LEGACY_DEBUG) += debugfs.o
+# b43legacy core
+b43legacy-y				+= main.o
+b43legacy-y				+= ilt.o
+b43legacy-y				+= phy.o
+b43legacy-y				+= radio.o
+b43legacy-y				+= sysfs.o
+b43legacy-y				+= xmit.o
+# b43legacy LED support
+b43legacy-$(CONFIG_B43LEGACY_LEDS)	+= leds.o
+# b43legacy debugging
+b43legacy-$(CONFIG_B43LEGACY_DEBUG)	+= debugfs.o
+# b43legacy DMA and PIO
+b43legacy-$(CONFIG_B43LEGACY_DMA)	+= dma.o
+b43legacy-$(CONFIG_B43LEGACY_PIO)	+= pio.o
 
-b43legacy-obj-$(CONFIG_B43LEGACY_DMA) += dma.o
-b43legacy-obj-$(CONFIG_B43LEGACY_PIO) += pio.o
+obj-$(CONFIG_B43LEGACY)			+= b43legacy.o
 
-b43legacy-objs := main.o \
-		ilt.o \
-		leds.o \
-		phy.o \
-		radio.o \
-		sysfs.o \
-		xmit.o \
-		$(b43legacy-obj-y)

drivers/net/wireless/b43legacy/b43legacy.h

@@ -663,8 +663,10 @@ struct b43legacy_wldev {
 	/* Various statistics about the physical device. */
 	struct b43legacy_stats stats;
 
-#define B43legacy_NR_LEDS		4
-	struct b43legacy_led leds[B43legacy_NR_LEDS];
+	/* The device LEDs. */
+	struct b43legacy_led led_tx;
+	struct b43legacy_led led_rx;
+	struct b43legacy_led led_assoc;
 
 	/* Reason code of the last interrupt. */
 	u32 irq_reason;

drivers/net/wireless/b43legacy/leds.h

 #ifndef B43legacy_LEDS_H_
 #define B43legacy_LEDS_H_
 
+struct b43legacy_wldev;
+
+#ifdef CONFIG_B43LEGACY_LEDS
+
 #include <linux/types.h>
-#include <linux/timer.h>
+#include <linux/leds.h>
 
 
+#define B43legacy_LED_MAX_NAME_LEN	31
+
 struct b43legacy_led {
-	u8 behaviour;
-	bool activelow;
-	/* Index in the "leds" array in b43legacy_wldev */
-	u8 index;
 	struct b43legacy_wldev *dev;
-	struct timer_list blink_timer;
-	unsigned long blink_interval;
+	/* The LED class device */
+	struct led_classdev led_dev;
+	/* The index number of the LED. */
+	u8 index;
+	/* If activelow is true, the LED is ON if the
+	 * bit is switched off. */
+	bool activelow;
+	/* The unique name string for this LED device. */
+	char name[B43legacy_LED_MAX_NAME_LEN + 1];
 };
 
-/* Delay between state changes when blinking in jiffies */
-#define B43legacy_LEDBLINK_SLOW		(HZ / 1)
-#define B43legacy_LEDBLINK_MEDIUM	(HZ / 4)
-#define B43legacy_LEDBLINK_FAST		(HZ / 8)
-
-#define B43legacy_LED_XFER_THRES	(HZ / 100)
-
 #define B43legacy_LED_BEHAVIOUR		0x7F
 #define B43legacy_LED_ACTIVELOW		0x80
-enum { /* LED behaviour values */
+/* LED behaviour values */
+enum b43legacy_led_behaviour {
 	B43legacy_LED_OFF,
 	B43legacy_LED_ON,
 	B43legacy_LED_ACTIVITY,
@@ -37,20 +40,24 @@ enum { /* LED behaviour values */
 	B43legacy_LED_WEIRD,
 	B43legacy_LED_ASSOC,
 	B43legacy_LED_INACTIVE,
-
-	/* Behaviour values for testing.
-	 * With these values it is easier to figure out
-	 * the real behaviour of leds, in case the SPROM
-	 * is missing information.
-	 */
-	B43legacy_LED_TEST_BLINKSLOW,
-	B43legacy_LED_TEST_BLINKMEDIUM,
-	B43legacy_LED_TEST_BLINKFAST,
 };
 
-int b43legacy_leds_init(struct b43legacy_wldev *dev);
+void b43legacy_leds_init(struct b43legacy_wldev *dev);
 void b43legacy_leds_exit(struct b43legacy_wldev *dev);
-void b43legacy_leds_update(struct b43legacy_wldev *dev, int activity);
-void b43legacy_leds_switch_all(struct b43legacy_wldev *dev, int on);
+
+#else /* CONFIG_B43EGACY_LEDS */
+/* LED support disabled */
+
+struct b43legacy_led {
+	/* empty */
+};
+
+static inline void b43legacy_leds_init(struct b43legacy_wldev *dev)
+{
+}
+static inline void b43legacy_leds_exit(struct b43legacy_wldev *dev)
+{
+}
+#endif /* CONFIG_B43LEGACY_LEDS */
 
 #endif /* B43legacy_LEDS_H_ */

drivers/net/wireless/b43legacy/main.c

@@ -83,10 +83,6 @@ static int modparam_long_retry = B43legacy_DEFAULT_LONG_RETRY_LIMIT;
 module_param_named(long_retry, modparam_long_retry, int, 0444);
 MODULE_PARM_DESC(long_retry, "Long-Retry-Limit (0 - 15)");
 
-static int modparam_noleds;
-module_param_named(noleds, modparam_noleds, int, 0444);
-MODULE_PARM_DESC(noleds, "Turn off all LED activity");
-
 static char modparam_fwpostfix[16];
 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
 MODULE_PARM_DESC(fwpostfix, "Postfix for the firmware files to load.");
@@ -1217,7 +1213,6 @@ static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
 	u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
 	u32 merged_dma_reason = 0;
 	int i;
-	int activity = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->wl->irq_lock, flags);
@@ -1281,7 +1276,6 @@ static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
 			b43legacy_pio_rx(dev->pio.queue0);
 		else
 			b43legacy_dma_rx(dev->dma.rx_ring0);
-		/* We intentionally don't set "activity" to 1, here. */
 	}
 	B43legacy_WARN_ON(dma_reason[1] & B43legacy_DMAIRQ_RX_DONE);
 	B43legacy_WARN_ON(dma_reason[2] & B43legacy_DMAIRQ_RX_DONE);
@@ -1290,20 +1284,13 @@ static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
 			b43legacy_pio_rx(dev->pio.queue3);
 		else
 			b43legacy_dma_rx(dev->dma.rx_ring3);
-		activity = 1;
 	}
 	B43legacy_WARN_ON(dma_reason[4] & B43legacy_DMAIRQ_RX_DONE);
 	B43legacy_WARN_ON(dma_reason[5] & B43legacy_DMAIRQ_RX_DONE);
 
-	if (reason & B43legacy_IRQ_TX_OK) {
+	if (reason & B43legacy_IRQ_TX_OK)
 		handle_irq_transmit_status(dev);
-		activity = 1;
-		/* TODO: In AP mode, this also causes sending of powersave
-			 responses. */
-	}
 
-	if (!modparam_noleds)
-		b43legacy_leds_update(dev, activity);
 	b43legacy_interrupt_enable(dev, dev->irq_savedstate);
 	mmiowb();
 	spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
@@ -1755,7 +1742,6 @@ static int b43legacy_gpio_init(struct b43legacy_wldev *dev)
 			  B43legacy_MMIO_STATUS_BITFIELD)
 			  & 0xFFFF3FFF);
 
-	b43legacy_leds_switch_all(dev, 0);
 	b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
 			  b43legacy_read16(dev,
 			  B43legacy_MMIO_GPIO_MASK)
@@ -2008,7 +1994,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 static void b43legacy_chip_exit(struct b43legacy_wldev *dev)
 {
 	b43legacy_radio_turn_off(dev);
-	if (!modparam_noleds)
 	b43legacy_leds_exit(dev);
 	b43legacy_gpio_cleanup(dev);
 	/* firmware is released later */
@@ -2039,9 +2024,11 @@ static int b43legacy_chip_init(struct b43legacy_wldev *dev)
 	err = b43legacy_gpio_init(dev);
 	if (err)
 		goto out; /* firmware is released later */
+	b43legacy_leds_init(dev);
+
 	err = b43legacy_upload_initvals(dev);
 	if (err)
-		goto err_gpio_cleanup;
+		goto err_leds_exit;
 	b43legacy_radio_turn_on(dev);
 
 	b43legacy_write16(dev, 0x03E6, 0x0000);
@@ -2120,7 +2107,8 @@ static int b43legacy_chip_init(struct b43legacy_wldev *dev)
 
 err_radio_off:
 	b43legacy_radio_turn_off(dev);
-err_gpio_cleanup:
+err_leds_exit:
+	b43legacy_leds_exit(dev);
 	b43legacy_gpio_cleanup(dev);
 	goto out;
 }
@@ -2168,7 +2156,6 @@ static void b43legacy_periodic_every1sec(struct b43legacy_wldev *dev)
 		dev->radio_hw_enable = radio_hw_enable;
 		b43legacyinfo(dev->wl, "Radio hardware status changed to %s\n",
 		       (radio_hw_enable) ? "enabled" : "disabled");
-		b43legacy_leds_update(dev, 0);
 	}
 }
 
@@ -3498,18 +3485,13 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
 	else
 		have_bphy = 1;
 
-	/* Initialize LEDs structs. */
-	err = b43legacy_leds_init(dev);
-	if (err)
-		goto err_powerdown;
-
 	dev->phy.gmode = (have_gphy || have_bphy);
 	tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
 	b43legacy_wireless_core_reset(dev, tmp);
 
 	err = b43legacy_phy_versioning(dev);
 	if (err)
-		goto err_leds_exit;
+		goto err_powerdown;
 	/* Check if this device supports multiband. */
 	if (!pdev ||
 	    (pdev->device != 0x4312 &&
@@ -3535,10 +3517,10 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
 
 	err = b43legacy_validate_chipaccess(dev);
 	if (err)
-		goto err_leds_exit;
+		goto err_powerdown;
 	err = b43legacy_setup_modes(dev, have_bphy, have_gphy);
 	if (err)
-		goto err_leds_exit;
+		goto err_powerdown;
 
 	/* Now set some default "current_dev" */
 	if (!wl->current_dev)
@@ -3553,8 +3535,6 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
 out:
 	return err;
 
-err_leds_exit:
-	b43legacy_leds_exit(dev);
 err_powerdown:
 	ssb_bus_may_powerdown(bus);
 	return err;

drivers/net/wireless/b43legacy/radio.c

@@ -2113,7 +2113,6 @@ void b43legacy_radio_turn_on(struct b43legacy_wldev *dev)
 		B43legacy_BUG_ON(1);
 	}
 	phy->radio_on = 1;
-	b43legacy_leds_update(dev, 0);
 }
 
 void b43legacy_radio_turn_off(struct b43legacy_wldev *dev)
@@ -2135,7 +2134,6 @@ void b43legacy_radio_turn_off(struct b43legacy_wldev *dev)
 		b43legacy_phy_write(dev, 0x0015, 0xAA00);
 	phy->radio_on = 0;
 	b43legacydbg(dev->wl, "Radio initialized\n");
-	b43legacy_leds_update(dev, 0);
 }
 
 void b43legacy_radio_clear_tssi(struct b43legacy_wldev *dev)