usb: gadget: fsl_mxc_udc: do not depend on grouped clocks

With the new common clock infrastructure, the following clocks should be
used on i.MX drivers: ipg, per and ahb.

Adapt fsl_mxc_udc to follow this new behaviour to fix the following probe error:

Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
fsl-usb2-udc fsl-usb2-udc: clk_get("usb") failed
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -2
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/gadget/fsl_mxc_udc.c

@@ -21,7 +21,8 @@
 #include <mach/hardware.h>
 
 static struct clk *mxc_ahb_clk;
-static struct clk *mxc_usb_clk;
+static struct clk *mxc_per_clk;
+static struct clk *mxc_ipg_clk;
 
 /* workaround ENGcm09152 for i.MX35 */
 #define USBPHYCTRL_OTGBASE_OFFSET	0x608
@@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	if (!cpu_is_mx35() && !cpu_is_mx25()) {
-		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-		if (IS_ERR(mxc_ahb_clk))
-			return PTR_ERR(mxc_ahb_clk);
-
-		ret = clk_prepare_enable(mxc_ahb_clk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-			goto eenahb;
+	mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(mxc_ipg_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
+		return PTR_ERR(mxc_ipg_clk);
 	}
+
+	mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(mxc_ahb_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
+		return PTR_ERR(mxc_ahb_clk);
 	}
 
-	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	mxc_usb_clk = clk_get(&pdev->dev, "usb");
-	if (IS_ERR(mxc_usb_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
-		ret = PTR_ERR(mxc_usb_clk);
-		goto egusb;
+	mxc_per_clk = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(mxc_per_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
+		return PTR_ERR(mxc_per_clk);
 	}
 
+	clk_prepare_enable(mxc_ipg_clk);
+	clk_prepare_enable(mxc_ahb_clk);
+	clk_prepare_enable(mxc_per_clk);
+
+	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
 	if (!cpu_is_mx51()) {
-		freq = clk_get_rate(mxc_usb_clk);
+		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
 			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
@@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_prepare_enable(mxc_usb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
-		goto eenusb;
-	}
-
 	return 0;
 
-eenusb:
 eclkrate:
-	clk_put(mxc_usb_clk);
-	mxc_usb_clk = NULL;
-egusb:
-	if (!cpu_is_mx35())
+	clk_disable_unprepare(mxc_ipg_clk);
 	clk_disable_unprepare(mxc_ahb_clk);
-eenahb:
-	if (!cpu_is_mx35())
-		clk_put(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_per_clk);
+	mxc_per_clk = NULL;
 	return ret;
 }
 
@@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable_unprepare(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-		mxc_usb_clk = NULL;
+		clk_disable_unprepare(mxc_per_clk);
+		mxc_per_clk = NULL;
 	}
 }
 
 void fsl_udc_clk_release(void)
 {
-	if (mxc_usb_clk) {
-		clk_disable_unprepare(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-	}
-	if (!cpu_is_mx35()) {
+	if (mxc_per_clk)
+		clk_disable_unprepare(mxc_per_clk);
 	clk_disable_unprepare(mxc_ahb_clk);
-		clk_put(mxc_ahb_clk);
-	}
+	clk_disable_unprepare(mxc_ipg_clk);
 }