Merge tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Fixes for code merged this cycle:

   - Fix restore of SPRs upon wake up from hypervisor state loss from
     Gautham R  Shenoy
   - Fix the state of root PE from Gavin Shan
   - Detach from PE on releasing PCI device from Gavin Shan
   - Fix size of NUM_CPU_FTR_KEYS on 32-bit
   - Fix missed TCE invalidations that should fallback to OPAL"

* tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL
  powerpc/powernv: Detach from PE on releasing PCI device
  powerpc/powernv: Fix the state of root PE
  powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit
  powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss

arch/powerpc/include/asm/cpu_has_feature.h

@@ -15,7 +15,7 @@ static inline bool early_cpu_has_feature(unsigned long feature)
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS
 #include <linux/jump_label.h>
 
-#define NUM_CPU_FTR_KEYS	64
+#define NUM_CPU_FTR_KEYS	BITS_PER_LONG
 
 extern struct static_key_true cpu_feature_keys[NUM_CPU_FTR_KEYS];
 

arch/powerpc/kernel/idle_book3s.S

@@ -411,7 +411,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
  *
  * r13 - PACA
  * cr3 - gt if waking up with partial/complete hypervisor state loss
- * cr4 - eq if waking up from complete hypervisor state loss.
+ * cr4 - gt or eq if waking up from complete hypervisor state loss.
  */
 _GLOBAL(pnv_wakeup_tb_loss)
 	ld	r1,PACAR1(r13)
@@ -453,7 +453,7 @@ lwarx_loop2:
 	 * At this stage
 	 * cr2 - eq if first thread to wakeup in core
 	 * cr3-  gt if waking up with partial/complete hypervisor state loss
-	 * cr4 - eq if waking up from complete hypervisor state loss.
+	 * cr4 - gt or eq if waking up from complete hypervisor state loss.
 	 */
 
 	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
@@ -481,7 +481,7 @@ first_thread_in_subcore:
 	 * If waking up from sleep, subcore state is not lost. Hence
 	 * skip subcore state restore
 	 */
-	bne	cr4,subcore_state_restored
+	blt	cr4,subcore_state_restored
 
 	/* Restore per-subcore state */
 	ld      r4,_SDR1(r1)
@@ -526,7 +526,7 @@ timebase_resync:
 	 * If waking up from sleep, per core state is not lost, skip to
 	 * clear_lock.
 	 */
-	bne	cr4,clear_lock
+	blt	cr4,clear_lock
 
 	/*
 	 * First thread in the core to wake up and its waking up with
@@ -557,7 +557,7 @@ common_exit:
 	 * If waking up from sleep, hypervisor state is not lost. Hence
 	 * skip hypervisor state restore.
 	 */
-	bne	cr4,hypervisor_state_restored
+	blt	cr4,hypervisor_state_restored
 
 	/* Waking up from winkle */
 

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -2217,7 +2217,7 @@ static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group,
 
 	pnv_pci_link_table_and_group(phb->hose->node, num,
 			tbl, &pe->table_group);
-	pnv_pci_phb3_tce_invalidate_pe(pe);
+	pnv_pci_ioda2_tce_invalidate_pe(pe);
 
 	return 0;
 }
@@ -2355,7 +2355,7 @@ static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group,
 	if (ret)
 		pe_warn(pe, "Unmapping failed, ret = %ld\n", ret);
 	else
-		pnv_pci_phb3_tce_invalidate_pe(pe);
+		pnv_pci_ioda2_tce_invalidate_pe(pe);
 
 	pnv_pci_unlink_table_and_group(table_group->tables[num], table_group);
 
@@ -3426,6 +3426,16 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 		}
 	}
 
+	/*
+	 * The PE for root bus can be removed because of hotplug in EEH
+	 * recovery for fenced PHB error. We need to mark the PE dead so
+	 * that it can be populated again in PCI hot add path. The PE
+	 * shouldn't be destroyed as it's the global reserved resource.
+	 */
+	if (phb->ioda.root_pe_populated &&
+	    phb->ioda.root_pe_idx == pe->pe_number)
+		phb->ioda.root_pe_populated = false;
+	else
 		pnv_ioda_free_pe(pe);
 }
 
@@ -3442,7 +3452,17 @@ static void pnv_pci_release_device(struct pci_dev *pdev)
 	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
 		return;
 
+	/*
+	 * PCI hotplug can happen as part of EEH error recovery. The @pdn
+	 * isn't removed and added afterwards in this scenario. We should
+	 * set the PE number in @pdn to an invalid one. Otherwise, the PE's
+	 * device count is decreased on removing devices while failing to
+	 * be increased on adding devices. It leads to unbalanced PE's device
+	 * count and eventually make normal PCI hotplug path broken.
+	 */
 	pe = &phb->ioda.pe_array[pdn->pe_number];
+	pdn->pe_number = IODA_INVALID_PE;
+
 	WARN_ON(--pe->device_count < 0);
 	if (pe->device_count == 0)
 		pnv_ioda_release_pe(pe);