Merge tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux

Pull tensa fixes from Chris Zankel:
 "This series includes fixes for potentially serious bugs in the
  routines spilling processor registers to stack, as well as other
  issues and compiler errors and warnings.

   - allow booting xtfpga on boards with new uBoot and >128MBytes memory
   - drop nonexistent GPIO32 support from fsf variant
   - don't select USE_GENERIC_SMP_HELPERS
   - enable common clock framework support, set up ethoc clock on xtfpga
   - wire up sched_setattr and sched_getattr syscalls.
   - fix system call to spill the processor registers to stack.
   - improve kernel macro to spill the processor registers
   - export ccount_freq symbol
   - fix undefined symbol warning"

* tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux:
  xtensa: wire up sched_setattr and sched_getattr syscalls
  xtensa: xtfpga: set ethoc clock frequency
  xtensa: xtfpga: use common clock framework
  xtensa: support common clock framework
  xtensa: no need to select USE_GENERIC_SMP_HELPERS
  xtensa: fsf: drop nonexistent GPIO32 support
  xtensa: don't pass high memory to bootmem allocator
  xtensa: fix fast_syscall_spill_registers
  xtensa: fix fast_syscall_spill_registers
  xtensa: save current register frame in fast_syscall_spill_registers_fixup
  xtensa: introduce spill_registers_kernel macro
  xtensa: export ccount_freq
  xtensa: fix warning '"CONFIG_OF" is not defined'

arch/xtensa/Kconfig

@@ -20,6 +20,7 @@ config XTENSA
 	select HAVE_FUNCTION_TRACER
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_PERF_EVENTS
+	select COMMON_CLK
 	help
 	  Xtensa processors are 32-bit RISC machines designed by Tensilica
 	  primarily for embedded systems.  These processors are both
@@ -80,7 +81,6 @@ choice
 config XTENSA_VARIANT_FSF
 	bool "fsf - default (not generic) configuration"
 	select MMU
-	select HAVE_XTENSA_GPIO32
 
 config XTENSA_VARIANT_DC232B
 	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
@@ -135,7 +135,6 @@ config HAVE_SMP
 config SMP
 	bool "Enable Symmetric multi-processing support"
 	depends on HAVE_SMP
-	select USE_GENERIC_SMP_HELPERS
 	select GENERIC_SMP_IDLE_THREAD
 	help
 	  Enabled SMP Software; allows more than one CPU/CORE

arch/xtensa/boot/dts/xtfpga.dtsi

@@ -35,6 +35,13 @@ pic: pic {
 		interrupt-controller;
 	};
 
+	clocks {
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
 	serial0: serial@fd050020 {
 		device_type = "serial";
 		compatible = "ns16550a";
@@ -42,9 +49,7 @@ serial0: serial@fd050020 {
 		reg = <0xfd050020 0x20>;
 		reg-shift = <2>;
 		interrupts = <0 1>; /* external irq 0 */
-		/* Filled in by platform_setup from FPGA register
-		 * clock-frequency = <100000000>;
-		 */
+		clocks = <&osc>;
 	};
 
 	enet0: ethoc@fd030000 {
@@ -52,5 +57,6 @@ enet0: ethoc@fd030000 {
 		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
 		interrupts = <1 1>; /* external irq 1 */
 		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
 	};
 };

arch/xtensa/include/asm/io.h

@@ -25,7 +25,7 @@
 
 #ifdef CONFIG_MMU
 
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
 extern unsigned long xtensa_kio_paddr;
 
 static inline unsigned long xtensa_get_kio_paddr(void)

arch/xtensa/include/asm/traps.h

@@ -23,25 +23,37 @@ void secondary_trap_init(void);
 
 static inline void spill_registers(void)
 {
-
+#if XCHAL_NUM_AREGS > 16
 	__asm__ __volatile__ (
-		"movi	a14, "__stringify((1 << PS_EXCM_BIT) | LOCKLEVEL)"\n\t"
-		"mov	a12, a0\n\t"
-		"rsr	a13, sar\n\t"
-		"xsr	a14, ps\n\t"
-		"movi	a0, _spill_registers\n\t"
-		"rsync\n\t"
-		"callx0 a0\n\t"
-		"mov	a0, a12\n\t"
-		"wsr	a13, sar\n\t"
-		"wsr	a14, ps\n\t"
-		: :
-#if defined(CONFIG_FRAME_POINTER)
-		: "a2", "a3", "a4",       "a11", "a12", "a13", "a14", "a15",
+		"	call12	1f\n"
+		"	_j	2f\n"
+		"	retw\n"
+		"	.align	4\n"
+		"1:\n"
+		"	_entry	a1, 48\n"
+		"	addi	a12, a0, 3\n"
+#if XCHAL_NUM_AREGS > 32
+		"	.rept	(" __stringify(XCHAL_NUM_AREGS) " - 32) / 12\n"
+		"	_entry	a1, 48\n"
+		"	mov	a12, a0\n"
+		"	.endr\n"
+#endif
+		"	_entry	a1, 48\n"
+#if XCHAL_NUM_AREGS % 12 == 0
+		"	mov	a8, a8\n"
+#elif XCHAL_NUM_AREGS % 12 == 4
+		"	mov	a12, a12\n"
+#elif XCHAL_NUM_AREGS % 12 == 8
+		"	mov	a4, a4\n"
+#endif
+		"	retw\n"
+		"2:\n"
+		: : : "a12", "a13", "memory");
 #else
-		: "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15",
+	__asm__ __volatile__ (
+		"	mov	a12, a12\n"
+		: : : "memory");
 #endif
-		  "memory");
 }
 
 #endif /* _XTENSA_TRAPS_H */

arch/xtensa/include/asm/vectors.h

@@ -25,7 +25,7 @@
 #define XCHAL_KIO_DEFAULT_PADDR		0xf0000000
 #define XCHAL_KIO_SIZE			0x10000000
 
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
 #define XCHAL_KIO_PADDR			xtensa_get_kio_paddr()
 #else
 #define XCHAL_KIO_PADDR			XCHAL_KIO_DEFAULT_PADDR

arch/xtensa/include/uapi/asm/unistd.h

@@ -734,7 +734,12 @@ __SYSCALL(332, sys_finit_module, 3)
 #define __NR_accept4				333
 __SYSCALL(333, sys_accept4, 4)
 
-#define __NR_syscall_count			334
+#define __NR_sched_setattr			334
+__SYSCALL(334, sys_sched_setattr, 2)
+#define __NR_sched_getattr			335
+__SYSCALL(335, sys_sched_getattr, 3)
+
+#define __NR_syscall_count			336
 
 /*
  * sysxtensa syscall handler

arch/xtensa/kernel/setup.c

@@ -22,6 +22,7 @@
 #include <linux/bootmem.h>
 #include <linux/kernel.h>
 #include <linux/percpu.h>
+#include <linux/clk-provider.h>
 #include <linux/cpu.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
@@ -276,6 +277,7 @@ void __init early_init_devtree(void *params)
 
 static int __init xtensa_device_probe(void)
 {
+	of_clk_init(NULL);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	return 0;
 }

arch/xtensa/kernel/time.c

@@ -30,6 +30,7 @@
 #include <asm/platform.h>
 
 unsigned long ccount_freq;		/* ccount Hz */
+EXPORT_SYMBOL(ccount_freq);
 
 static cycle_t ccount_read(struct clocksource *cs)
 {

arch/xtensa/kernel/vectors.S

@@ -235,7 +235,7 @@ ENTRY(_DoubleExceptionVector)
 
 	/* Check for overflow/underflow exception, jump if overflow. */
 
-	_bbci.l	a0, 6, _DoubleExceptionVector_WindowOverflow
+	bbci.l	a0, 6, _DoubleExceptionVector_WindowOverflow
 
 	/*
 	 * Restart window underflow exception.

arch/xtensa/kernel/xtensa_ksyms.c

@@ -122,9 +122,7 @@ EXPORT_SYMBOL(insw);
 EXPORT_SYMBOL(insl);
 
 extern long common_exception_return;
-extern long _spill_registers;
 EXPORT_SYMBOL(common_exception_return);
-EXPORT_SYMBOL(_spill_registers);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(_mcount);

arch/xtensa/mm/init.c

@@ -90,7 +90,7 @@ int __init mem_reserve(unsigned long start, unsigned long end, int must_exist)
 
 
 /*
- * Initialize the bootmem system and give it all the memory we have available.
+ * Initialize the bootmem system and give it all low memory we have available.
  */
 
 void __init bootmem_init(void)
@@ -142,9 +142,14 @@ void __init bootmem_init(void)
 
 	/* Add all remaining memory pieces into the bootmem map */
 
-	for (i=0; i<sysmem.nr_banks; i++)
+	for (i = 0; i < sysmem.nr_banks; i++) {
+		if (sysmem.bank[i].start >> PAGE_SHIFT < max_low_pfn) {
+			unsigned long end = min(max_low_pfn << PAGE_SHIFT,
+						sysmem.bank[i].end);
 			free_bootmem(sysmem.bank[i].start,
-			     sysmem.bank[i].end - sysmem.bank[i].start);
+				     end - sysmem.bank[i].start);
+		}
+	}
 
 }
 

arch/xtensa/mm/mmu.c

@@ -39,7 +39,7 @@ void init_mmu(void)
 	set_itlbcfg_register(0);
 	set_dtlbcfg_register(0);
 #endif
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
 	/*
 	 * Update the IO area mapping in case xtensa_kio_paddr has changed
 	 */

arch/xtensa/platforms/xtfpga/setup.c

@@ -135,11 +135,11 @@ static void __init update_local_mac(struct device_node *node)
 
 static int __init machine_setup(void)
 {
-	struct device_node *serial;
+	struct device_node *clock;
 	struct device_node *eth = NULL;
 
-	for_each_compatible_node(serial, NULL, "ns16550a")
-		update_clock_frequency(serial);
+	for_each_node_by_name(clock, "main-oscillator")
+		update_clock_frequency(clock);
 
 	if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
 		update_local_mac(eth);
@@ -290,6 +290,7 @@ static int __init xtavnet_init(void)
 	 * knows whether they set it correctly on the DIP switches.
 	 */
 	pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
+	ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR;
 
 	return 0;
 }

arch/xtensa/variants/fsf/include/variant/tie.h

@@ -18,13 +18,6 @@
 #define XCHAL_CP_MASK			0x00	/* bitmask of all CPs by ID */
 #define XCHAL_CP_PORT_MASK		0x00	/* bitmask of only port CPs */
 
-/*  Basic parameters of each coprocessor:  */
-#define XCHAL_CP7_NAME			"XTIOP"
-#define XCHAL_CP7_IDENT			XTIOP
-#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
-#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
-#define XCHAL_CP_ID_XTIOP		7	/* coprocessor ID (0..7) */
-
 /*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
 #define XCHAL_NCP_SA_SIZE		0
 #define XCHAL_NCP_SA_ALIGN		1
@@ -42,6 +35,8 @@
 #define XCHAL_CP5_SA_ALIGN		1
 #define XCHAL_CP6_SA_SIZE		0
 #define XCHAL_CP6_SA_ALIGN		1
+#define XCHAL_CP7_SA_SIZE		0
+#define XCHAL_CP7_SA_ALIGN		1
 
 /*  Save area for non-coprocessor optional and custom (TIE) state:  */
 #define XCHAL_NCP_SA_SIZE		0