OMAP3: ASM sleep code format rework

Cosmetic fixes to the code:
- white spaces and tabs,
- alignement,
- comments rephrase and typos,
- multi-line comments

Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-omap2/sleep34xx.S

 /*
- * linux/arch/arm/mach-omap2/sleep.S
- *
  * (C) Copyright 2007
  * Texas Instruments
  * Karthik Dasu <karthik-dp@ti.com>
@@ -81,20 +79,20 @@
 	.text
 /* Function call to get the restore pointer for resume from OFF */
 ENTRY(get_restore_pointer)
-        stmfd   sp!, {lr}     @ save registers on stack
+	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore
-        ldmfd   sp!, {pc}     @ restore regs and return
+	ldmfd	sp!, {pc}	@ restore regs and return
 ENTRY(get_restore_pointer_sz)
-        .word   . - get_restore_pointer
+	.word	. - get_restore_pointer
 
 	.text
 /* Function call to get the restore pointer for 3630 resume from OFF */
 ENTRY(get_omap3630_restore_pointer)
-        stmfd   sp!, {lr}     @ save registers on stack
+	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_3630
-        ldmfd   sp!, {pc}     @ restore regs and return
+	ldmfd	sp!, {pc}	@ restore regs and return
 ENTRY(get_omap3630_restore_pointer_sz)
-        .word   . - get_omap3630_restore_pointer
+	.word	. - get_omap3630_restore_pointer
 
 	.text
 /* Function call to get the restore pointer for ES3 to resume from OFF */
@@ -112,16 +110,16 @@ ENTRY(get_es3_restore_pointer_sz)
  * place on 3630. Hopefully some version in the future may not need this.
  */
 ENTRY(enable_omap3630_toggle_l2_on_restore)
-        stmfd   sp!, {lr}     @ save registers on stack
+	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
 	str	r1, l2dis_3630
-        ldmfd   sp!, {pc}     @ restore regs and return
+	ldmfd	sp!, {pc}	@ restore regs and return
 
+	.text
 /* Function to call rom code to save secure ram context */
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
-
 	adr	r3, api_params		@ r3 points to parameters
 	str	r0, [r3,#0x4]		@ r0 has sdram address
 	ldr	r12, high_mask
@@ -165,14 +163,14 @@ ENTRY(save_secure_ram_context_sz)
  *
  *
  * Notes:
- * - this code gets copied to internal SRAM at boot. The execution pointer
- *   in SRAM is _omap_sram_idle.
+ * - this code gets copied to internal SRAM at boot and after wake-up
+ *   from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
  * - when the OMAP wakes up it continues at different execution points
  *   depending on the low power mode (non-OFF vs OFF modes),
  *   cf. 'Resume path for xxx mode' comments.
  */
 ENTRY(omap34xx_cpu_suspend)
-	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
 
 	/*
 	 * r0 contains restore pointer in sdram
@@ -280,9 +278,9 @@ clean_l2:
 	 *  - should be faster and will change with kernel
 	 *  - 'might' have to copy address, load and jump to it
 	 */
-	ldr r1, kernel_flush
-	mov lr, pc
-	bx  r1
+	ldr	r1, kernel_flush
+	mov	lr, pc
+	bx	r1
 
 omap3_do_wfi:
 	ldr	r4, sdrc_power		@ read the SDRC_POWER register
@@ -375,18 +373,18 @@ restore_3630:
 	/* Fall through to common code for the remaining logic */
 
 restore:
-        /*
+	/*
 	 * Check what was the reason for mpu reset and store the reason in r9:
 	 *  0 - No context lost
-         *  1 - Only L1 and logic lost
-         *  2 - Only L2 lost - In this case, we wont be here
-         *  3 - Both L1 and L2 lost
+	 *  1 - Only L1 and logic lost
+	 *  2 - Only L2 lost - In this case, we wont be here
+	 *  3 - Both L1 and L2 lost
 	 */
-	ldr     r1, pm_pwstctrl_mpu
+	ldr	r1, pm_pwstctrl_mpu
 	ldr	r2, [r1]
-	and     r2, r2, #0x3
-	cmp     r2, #0x0	@ Check if target power state was OFF or RET
-        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	and	r2, r2, #0x3
+	cmp	r2, #0x0	@ Check if target power state was OFF or RET
+	moveq	r9, #0x3	@ MPU OFF => L1 and L2 lost
 	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
 
@@ -402,71 +400,74 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
-	mov	r0, #40		@ set service ID for PPA
-	mov	r12, r0		@ copy secure Service ID in r12
-	mov	r1, #0		@ set task id for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r0, #40			@ set service ID for PPA
+	mov	r12, r0			@ copy secure Service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 	/* Write to Aux control register to set some bits */
-	mov	r0, #42		@ set service ID for PPA
-	mov	r12, r0		@ copy secure Service ID in r12
-	mov	r1, #0		@ set task id for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r0, #42			@ set service ID for PPA
+	mov	r12, r0			@ copy secure Service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
-	ldr	r3, [r4, #0xBC]	@ r3 points to parameters
+	ldr	r3, [r4, #0xBC]		@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 
 #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	/* Restore L2 aux control register */
-	@ set service ID for PPA
+					@ set service ID for PPA
 	mov	r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
-	mov	r12, r0		@ copy service ID in r12
-	mov	r1, #0		@ set task ID for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r12, r0			@ copy service ID in r12
+	mov	r1, #0			@ set task ID for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4, #0xBC]
-	adds	r3, r3, #8	@ r3 points to parameters
+	adds	r3, r3, #8		@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 #endif
 	b	logic_l1_restore
+
 l2_inv_api_params:
-	.word   0x1, 0x00
+	.word	0x1, 0x00
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
-	mov r12, #0x1                         @ set up to invalide L2
-smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
+	mov r12, #0x1			@ set up to invalidate L2
+	.word 0xE1600070		@ Call SMI monitor (smieq)
 	/* Write to Aux control register to set some bits */
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#4]
 	mov	r12, #0x3
-	.word 0xE1600070	@ Call SMI monitor (smieq)
+	.word	0xE1600070		@ Call SMI monitor (smieq)
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#12]
 	mov	r12, #0x2
-	.word 0xE1600070	@ Call SMI monitor (smieq)
+	.word	0xE1600070		@ Call SMI monitor (smieq)
 logic_l1_restore:
 	ldr	r1, l2dis_3630
-	cmp	r1, #0x1	@ Do we need to re-enable L2 on 3630?
+	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
-	orr	r1, r1, #2	@ re-enable L2 cache
+	orr	r1, r1, #2		@ re-enable L2 cache
 	mcr	p15, 0, r1, c1, c0, 1
 skipl2reen:
 	mov	r1, #0
-	/* Invalidate all instruction caches to PoU
-	 * and flush branch target cache */
+	/*
+	 * Invalidate all instruction caches to PoU
+	 * and flush branch target cache
+	 */
 	mcr	p15, 0, r1, c7, c5, 0
 
 	ldr	r4, scratchpad_base
@@ -487,33 +488,33 @@ skipl2reen:
 	MCR p15, 0, r6, c2, c0, 1
 	/* Translation table base control register */
 	MCR p15, 0, r7, c2, c0, 2
-	/*domain access Control Register */
+	/* Domain access Control Register */
 	MCR p15, 0, r8, c3, c0, 0
-	/* data fault status Register */
+	/* Data fault status Register */
 	MCR p15, 0, r9, c5, c0, 0
 
-	ldmia  r3!,{r4-r8}
-	/* instruction fault status Register */
+	ldmia	r3!,{r4-r8}
+	/* Instruction fault status Register */
 	MCR p15, 0, r4, c5, c0, 1
-	/*Data Auxiliary Fault Status Register */
+	/* Data Auxiliary Fault Status Register */
 	MCR p15, 0, r5, c5, c1, 0
-	/*Instruction Auxiliary Fault Status Register*/
+	/* Instruction Auxiliary Fault Status Register*/
 	MCR p15, 0, r6, c5, c1, 1
-	/*Data Fault Address Register */
+	/* Data Fault Address Register */
 	MCR p15, 0, r7, c6, c0, 0
-	/*Instruction Fault Address Register*/
+	/* Instruction Fault Address Register*/
 	MCR p15, 0, r8, c6, c0, 2
-	ldmia  r3!,{r4-r7}
+	ldmia	r3!,{r4-r7}
 
-	/* user r/w thread and process ID */
+	/* User r/w thread and process ID */
 	MCR p15, 0, r4, c13, c0, 2
-	/* user ro thread and process ID */
+	/* User ro thread and process ID */
 	MCR p15, 0, r5, c13, c0, 3
-	/*Privileged only thread and process ID */
+	/* Privileged only thread and process ID */
 	MCR p15, 0, r6, c13, c0, 4
-	/* cache size selection */
+	/* Cache size selection */
 	MCR p15, 2, r7, c0, c0, 0
-	ldmia  r3!,{r4-r8}
+	ldmia	r3!,{r4-r8}
 	/* Data TLB lockdown registers */
 	MCR p15, 0, r4, c10, c0, 0
 	/* Instruction TLB lockdown registers */
@@ -525,26 +526,27 @@ skipl2reen:
 	/* Context PID */
 	MCR p15, 0, r8, c13, c0, 1
 
-	ldmia  r3!,{r4-r5}
-	/* primary memory remap register */
+	ldmia	r3!,{r4-r5}
+	/* Primary memory remap register */
 	MCR p15, 0, r4, c10, c2, 0
-	/*normal memory remap register */
+	/* Normal memory remap register */
 	MCR p15, 0, r5, c10, c2, 1
 
 	/* Restore cpsr */
-	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
-	msr	cpsr, r4	/*store cpsr */
+	ldmia	r3!,{r4}		@ load CPSR from SDRAM
+	msr	cpsr, r4		@ store cpsr
 
 	/* Enabling MMU here */
-	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
-	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	mrc	p15, 0, r7, c2, c0, 2 	@ Read TTBRControl
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
 	and	r7, #0x7
 	cmp	r7, #0x0
 	beq	usettbr0
 ttbr_error:
-	/* More work needs to be done to support N[0:2] value other than 0
-	* So looping here so that the error can be detected
-	*/
+	/*
+	 * More work needs to be done to support N[0:2] value other than 0
+	 * So looping here so that the error can be detected
+	 */
 	b	ttbr_error
 usettbr0:
 	mrc	p15, 0, r2, c2, c0, 0
@@ -552,21 +554,25 @@ usettbr0:
 	and	r2, r5
 	mov	r4, pc
 	ldr	r5, table_index_mask
-	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	and	r4, r5			@ r4 = 31 to 20 bits of pc
 	/* Extract the value to be written to table entry */
 	ldr	r1, table_entry
-	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* r1 has the value to be written to table entry*/
+	add	r1, r1, r4
 	/* Getting the address of table entry to modify */
 	lsr	r4, #18
-	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* r2 has the location which needs to be modified */
+	add	r2, r4
 	/* Storing previous entry of location being modified */
 	ldr	r5, scratchpad_base
 	ldr	r4, [r2]
 	str	r4, [r5, #0xC0]
 	/* Modify the table entry */
 	str	r1, [r2]
-	/* Storing address of entry being modified
-	 * - will be restored after enabling MMU */
+	/*
+	 * Storing address of entry being modified
+	 * - will be restored after enabling MMU
+	 */
 	ldr	r5, scratchpad_base
 	str	r2, [r5, #0xC4]
 
@@ -575,8 +581,11 @@ usettbr0:
 	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
 	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
 	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
-	/* Restore control register  but dont enable caches here*/
-	/* Caches will be enabled after restoring MMU table entry */
+	/*
+	 * Restore control register. This enables the MMU.
+	 * The caches and prediction are not enabled here, they
+	 * will be enabled after restoring the MMU table entry.
+	 */
 	ldmia	r3!, {r4}
 	/* Store previous value of control register in scratchpad */
 	str	r4, [r5, #0xC8]
@@ -589,7 +598,7 @@ usettbr0:
  * == Exit point from OFF mode ==
  * ==============================
  */
-	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 
 /*
@@ -655,55 +664,56 @@ ENTRY(es3_sdrc_fix_sz)
 /* Make sure SDRC accesses are ok */
 wait_sdrc_ok:
 
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this. */
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
 	ldr	r4, cm_idlest_ckgen
 wait_dpll3_lock:
 	ldr	r5, [r4]
 	tst	r5, #1
 	beq	wait_dpll3_lock
 
-        ldr     r4, cm_idlest1_core
+	ldr	r4, cm_idlest1_core
 wait_sdrc_ready:
-        ldr     r5, [r4]
-        tst     r5, #0x2
-        bne     wait_sdrc_ready
+	ldr	r5, [r4]
+	tst	r5, #0x2
+	bne	wait_sdrc_ready
 	/* allow DLL powerdown upon hw idle req */
-        ldr     r4, sdrc_power
-        ldr     r5, [r4]
-        bic     r5, r5, #0x40
-        str     r5, [r4]
-is_dll_in_lock_mode:
+	ldr	r4, sdrc_power
+	ldr	r5, [r4]
+	bic	r5, r5, #0x40
+	str	r5, [r4]
 
-        /* Is dll in lock mode? */
-        ldr     r4, sdrc_dlla_ctrl
-        ldr     r5, [r4]
-        tst     r5, #0x4
-        bxne    lr
-        /* wait till dll locks */
+is_dll_in_lock_mode:
+	/* Is dll in lock mode? */
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	tst	r5, #0x4
+	bxne	lr			@ Return if locked
+	/* wait till dll locks */
 wait_dll_lock_timed:
 	ldr	r4, wait_dll_lock_counter
 	add	r4, r4, #1
 	str	r4, wait_dll_lock_counter
 	ldr	r4, sdrc_dlla_status
-        mov	r6, #8		/* Wait 20uS for lock */
+	/* Wait 20uS for lock */
+	mov	r6, #8
 wait_dll_lock:
 	subs	r6, r6, #0x1
 	beq	kick_dll
-        ldr     r5, [r4]
-        and     r5, r5, #0x4
-        cmp     r5, #0x4
-        bne     wait_dll_lock
-        bx      lr
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	bx	lr			@ Return when locked
 
 	/* disable/reenable DLL if not locked */
 kick_dll:
 	ldr	r4, sdrc_dlla_ctrl
 	ldr	r5, [r4]
 	mov	r6, r5
-	bic	r6, #(1<<3)	/* disable dll */
+	bic	r6, #(1<<3)		@ disable dll
 	str	r6, [r4]
 	dsb
-	orr	r6, r6, #(1<<3)	/* enable dll */
+	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
 	ldr	r4, kick_counter
@@ -728,7 +738,7 @@ scratchpad_base:
 sram_base:
 	.word	SRAM_BASE_P + 0x8000
 sdrc_power:
-	.word SDRC_POWER_V
+	.word	SDRC_POWER_V
 ttbrbit_mask:
 	.word	0xFFFFC000
 table_index_mask:
@@ -742,9 +752,9 @@ control_stat:
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
 kernel_flush:
-	.word v7_flush_dcache_all
+	.word	v7_flush_dcache_all
 l2dis_3630:
-	.word 0
+	.word	0
 	/*
 	 * When exporting to userspace while the counters are in SRAM,
 	 * these 2 words need to be at the end to facilitate retrival!