ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer

If system is suspended when PCM was paused/stopped, restart doesn't
configure DMA as it is we are in Pause state and results in IO error
eventually.

Configure host/link DMA before initializing DSP Gateway copier module
instead of DAI prepare(). So moved DMA configuration to mixer PRE_PMD
widget handler instead of DAI prepare.

This uses previously added new API to do the configuration and removes
old DAI prepare code.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/skylake/skl-pcm.c

@@ -231,37 +231,19 @@ static int skl_be_prepare(struct snd_pcm_substream *substream,
 static int skl_pcm_prepare(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
-	struct hdac_ext_stream *stream = get_hdac_ext_stream(substream);
 	struct skl *skl = get_skl_ctx(dai->dev);
-	unsigned int format_val;
-	int err;
 	struct skl_module_cfg *mconfig;
 
 	dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
 
 	mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream);
 
-	format_val = skl_get_format(substream, dai);
-	dev_dbg(dai->dev, "stream_tag=%d formatvalue=%d\n",
-				hdac_stream(stream)->stream_tag, format_val);
-	snd_hdac_stream_reset(hdac_stream(stream));
-
 	/* In case of XRUN recovery, reset the FW pipe to clean state */
 	if (mconfig && (substream->runtime->status->state ==
 					SNDRV_PCM_STATE_XRUN))
 		skl_reset_pipe(skl->skl_sst, mconfig->pipe);
 
-	err = snd_hdac_stream_set_params(hdac_stream(stream), format_val);
-	if (err < 0)
-		return err;
-
-	err = snd_hdac_stream_setup(hdac_stream(stream));
-	if (err < 0)
-		return err;
-
-	hdac_stream(stream)->prepared = 1;
-
-	return err;
+	return 0;
 }
 
 static int skl_pcm_hw_params(struct snd_pcm_substream *substream,
@@ -436,7 +418,6 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_RESUME:
 		if (!w->ignore_suspend) {
-			skl_pcm_prepare(substream, dai);
 			/*
 			 * enable DMA Resume enable bit for the stream, set the
 			 * dpib & lpib position to resume before starting the
@@ -457,7 +438,6 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
 		 * pipeline is started but there is a delay in starting the
 		 * DMA channel on the host.
 		 */
-		snd_hdac_ext_stream_decouple(ebus, stream, true);
 		ret = skl_decoupled_trigger(substream, cmd);
 		if (ret < 0)
 			return ret;
@@ -539,41 +519,15 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 static int skl_link_pcm_prepare(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
-	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct hdac_ext_bus *ebus = dev_get_drvdata(dai->dev);
-	struct hdac_ext_stream *link_dev =
-			snd_soc_dai_get_dma_data(dai, substream);
-	unsigned int format_val = 0;
-	struct skl_dma_params *dma_params;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct hdac_ext_link *link;
 	struct skl *skl = get_skl_ctx(dai->dev);
 	struct skl_module_cfg *mconfig = NULL;
 
-	dma_params  = (struct skl_dma_params *)
-			snd_soc_dai_get_dma_data(codec_dai, substream);
-	if (dma_params)
-		format_val = dma_params->format;
-	dev_dbg(dai->dev, "stream_tag=%d formatvalue=%d codec_dai_name=%s\n",
-			hdac_stream(link_dev)->stream_tag, format_val, codec_dai->name);
-
-	link = snd_hdac_ext_bus_get_link(ebus, rtd->codec->component.name);
-	if (!link)
-		return -EINVAL;
-
-	snd_hdac_ext_link_stream_reset(link_dev);
-
 	/* In case of XRUN recovery, reset the FW pipe to clean state */
 	mconfig = skl_tplg_be_get_cpr_module(dai, substream->stream);
 	if (mconfig && (substream->runtime->status->state ==
 					SNDRV_PCM_STATE_XRUN))
 		skl_reset_pipe(skl->skl_sst, mconfig->pipe);
 
-	snd_hdac_ext_link_stream_setup(link_dev, format_val);
-
-	snd_hdac_ext_link_set_stream_id(link, hdac_stream(link_dev)->stream_tag);
-	link_dev->link_prepared = 1;
-
 	return 0;
 }
 
@@ -588,10 +542,8 @@ static int skl_link_pcm_trigger(struct snd_pcm_substream *substream,
 	dev_dbg(dai->dev, "In %s cmd=%d\n", __func__, cmd);
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_RESUME:
-		skl_link_pcm_prepare(substream, dai);
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		snd_hdac_ext_stream_decouple(ebus, stream, true);
 		snd_hdac_ext_link_stream_start(link_dev);
 		break;
 

sound/soc/intel/skylake/skl-topology.c

@@ -496,6 +496,20 @@ static int skl_tplg_set_module_init_data(struct snd_soc_dapm_widget *w)
 	return 0;
 }
 
+static int skl_tplg_module_prepare(struct skl_sst *ctx, struct skl_pipe *pipe,
+		struct snd_soc_dapm_widget *w, struct skl_module_cfg *mcfg)
+{
+	switch (mcfg->dev_type) {
+	case SKL_DEVICE_HDAHOST:
+		return skl_pcm_host_dma_prepare(ctx->dev, pipe->p_params);
+
+	case SKL_DEVICE_HDALINK:
+		return skl_pcm_link_dma_prepare(ctx->dev, pipe->p_params);
+	}
+
+	return 0;
+}
+
 /*
  * Inside a pipe instance, we can have various modules. These modules need
  * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by
@@ -535,6 +549,11 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
 			mconfig->m_state = SKL_MODULE_LOADED;
 		}
 
+		/* prepare the DMA if the module is gateway cpr */
+		ret = skl_tplg_module_prepare(ctx, pipe, w, mconfig);
+		if (ret < 0)
+			return ret;
+
 		/* update blob if blob is null for be with default value */
 		skl_tplg_update_be_blob(w, ctx);