Skip to content

L
linux
Commit bbfebd66 authored by Dave Jones's avatar Dave Jones
Browse files
Options

[CPUFREQ] checkpatch cleanups for speedstep related drivers. 

Signed-off-by: default avatarDave Jones <davej@redhat.com>
parent 97acec55
Expand all Show whitespace changes
Inline Side-by-side
Showing with 258 additions and 185 deletions
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
View file @ bbfebd66
......@@ -27,15 +27,16 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/cpumask.h>
#include <linux/timex.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/timex.h>
#include "speedstep-lib.h"
#define PFX "p4-clockmod: "
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
"p4-clockmod", msg)
/*
* Duty Cycle (3bits), note DC_DISABLE is not specified in
......@@ -58,7 +59,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
{
u32 l, h;
if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
if (!cpu_online(cpu) ||
(newstate > DC_DISABLE) || (newstate == DC_RESV))
return -EINVAL;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
......@@ -66,7 +68,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
if (l & 0x01)
dprintk("CPU#%d currently thermal throttled\n", cpu);
if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
if (has_N44_O17_errata[cpu] &&
(newstate == DC_25PT || newstate == DC_DFLT))
newstate = DC_38PT;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
......@@ -112,7 +115,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
struct cpufreq_freqs freqs;
int i;
if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
target_freq, relation, &newstate))
return -EINVAL;
freqs.old = cpufreq_p4_get(policy->cpu);
......@@ -127,7 +131,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
/* run on each logical CPU,
* see section 13.15.3 of IA32 Intel Architecture Software
* Developer's Manual, Volume 3
*/
for_each_cpu(i, policy->cpus)
......@@ -153,28 +158,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
"The acpi-cpufreq module offers voltage scaling"
" in addition of frequency scaling. You should use "
"that instead of p4-clockmod, if possible.\n");
printk(KERN_WARNING PFX "Warning: EST-capable CPU "
"detected. The acpi-cpufreq module offers "
"voltage scaling in addition of frequency "
"scaling. You should use that instead of "
"p4-clockmod, if possible.\n");
switch (c->x86_model) {
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
case 0x16: /* Celeron Core */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
case 0x0D: /* Pentium M (Dothan) */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
/* fall through */
case 0x09: /* Pentium M (Banias) */
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
}
}
if (c->x86 != 0xF) {
if (!cpu_has(c, X86_FEATURE_EST))
printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. "
"Please send an e-mail to <cpufreq@vger.kernel.org>\n");
printk(KERN_WARNING PFX "Unknown CPU. "
"Please send an e-mail to "
"<cpufreq@vger.kernel.org>\n");
return 0;
}
......@@ -182,16 +189,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
* throttling is active or not. */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
"The speedstep-ich or acpi cpufreq modules offer "
"voltage scaling in addition of frequency scaling. "
"You should use either one instead of p4-clockmod, "
"if possible.\n");
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
}
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
}
......@@ -223,8 +230,8 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
return -EINVAL;
/* table init */
for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if ((i<2) && (has_N44_O17_errata[policy->cpu]))
for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
else
p4clockmod_table[i].frequency = (stock_freq * i)/8;
......@@ -258,12 +265,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu)
l = DC_DISABLE;
if (l != DC_DISABLE)
return (stock_freq * l / 8);
return stock_freq * l / 8;
return stock_freq;
}
static struct freq_attr* p4clockmod_attr[] = {
static struct freq_attr *p4clockmod_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
......@@ -299,9 +306,10 @@ static int __init cpufreq_p4_init(void)
ret = cpufreq_register_driver(&p4clockmod_driver);
if (!ret)
printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
"Modulation available\n");
return (ret);
return ret;
}
......@@ -311,9 +319,9 @@ static void __exit cpufreq_p4_exit(void)
}
MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
MODULE_LICENSE ("GPL");
MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
MODULE_LICENSE("GPL");
late_initcall(cpufreq_p4_init);
module_exit(cpufreq_p4_exit);
arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
View file @ bbfebd66
......@@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev;
/* speedstep_processor
*/
static unsigned int speedstep_processor = 0;
static unsigned int speedstep_processor;
static u32 pmbase;
......@@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
};
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
"speedstep-ich", msg)
/**
......@@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
*
* Returns: -ENODEV if no register could be found
*/
static int speedstep_find_register (void)
static int speedstep_find_register(void)
{
if (!speedstep_chipset_dev)
return -ENODEV;
......@@ -90,7 +91,7 @@ static int speedstep_find_register (void)
*
* Tries to change the SpeedStep state.
*/
static void speedstep_set_state (unsigned int state)
static void speedstep_set_state(unsigned int state)
{
u8 pm2_blk;
u8 value;
......@@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state)
dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
if (state == (value & 0x1)) {
dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
} else {
printk (KERN_ERR "cpufreq: change failed - I/O error\n");
}
if (state == (value & 0x1))
dprintk("change to %u MHz succeeded\n",
speedstep_get_frequency(speedstep_processor) / 1000);
else
printk(KERN_ERR "cpufreq: change failed - I/O error\n");
return;
}
......@@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state)
* Tries to activate the SpeedStep status and control registers.
* Returns -EINVAL on an unsupported chipset, and zero on success.
*/
static int speedstep_activate (void)
static int speedstep_activate(void)
{
u16 value = 0;
......@@ -175,20 +176,18 @@ static int speedstep_activate (void)
* functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
* chipset, or zero on failure.
*/
static unsigned int speedstep_detect_chipset (void)
static unsigned int speedstep_detect_chipset(void)
{
speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82801DB_12,
PCI_ANY_ID,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
NULL);
if (speedstep_chipset_dev)
return 4; /* 4-M */
speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82801CA_12,
PCI_ANY_ID,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
NULL);
if (speedstep_chipset_dev)
return 3; /* 3-M */
......@@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void)
speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82801BA_10,
PCI_ANY_ID,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
NULL);
if (speedstep_chipset_dev) {
/* speedstep.c causes lockups on Dell Inspirons 8000 and
......@@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void)
hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82815_MC,
PCI_ANY_ID,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
NULL);
if (!hostbridge)
......@@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus)
cpus_allowed = current->cpus_allowed;
set_cpus_allowed_ptr(current, cpus);
speed = speedstep_get_processor_frequency(speedstep_processor);
speed = speedstep_get_frequency(speedstep_processor);
set_cpus_allowed_ptr(current, &cpus_allowed);
dprintk("detected %u kHz as current frequency\n", speed);
return speed;
......@@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu)
* speedstep_target - set a new CPUFreq policy
* @policy: new policy
* @target_freq: the target frequency
* @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
* @relation: how that frequency relates to achieved frequency
* (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
*
* Sets a new CPUFreq policy.
*/
static int speedstep_target (struct cpufreq_policy *policy,
static int speedstep_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
......@@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy,
cpumask_t cpus_allowed;
int i;
if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
target_freq, relation, &newstate))
return -EINVAL;
freqs.old = _speedstep_get(policy->cpus);
......@@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
* Limit must be within speedstep_low_freq and speedstep_high_freq, with
* at least one border included.
*/
static int speedstep_verify (struct cpufreq_policy *policy)
static int speedstep_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
}
......@@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
return -EIO;
dprintk("currently at %s speed setting - %i MHz\n",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
? "low" : "high",
(speed / 1000));
/* cpuinfo and default policy values */
......@@ -352,7 +352,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
if (result)
return (result);
return result;
cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
......@@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy)
return 0;
}
static struct freq_attr* speedstep_attr[] = {
static struct freq_attr *speedstep_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
......@@ -396,13 +396,15 @@ static int __init speedstep_init(void)
/* detect processor */
speedstep_processor = speedstep_detect_processor();
if (!speedstep_processor) {
dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
dprintk("Intel(R) SpeedStep(TM) capable processor "
"not found\n");
return -ENODEV;
}
/* detect chipset */
if (!speedstep_detect_chipset()) {
dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
dprintk("Intel(R) SpeedStep(TM) for this chipset not "
"(yet) available.\n");
return -ENODEV;
}
......@@ -431,9 +433,11 @@ static void __exit speedstep_exit(void)
}
MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
MODULE_LICENSE ("GPL");
MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
"Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
"with ICH-M southbridges.");
MODULE_LICENSE("GPL");
module_init(speedstep_init);
module_exit(speedstep_exit);
arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
View file @ bbfebd66
This diff is collapsed.
arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
View file @ bbfebd66
......@@ -12,17 +12,17 @@
/* processors */
#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */
#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */
#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */
#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */
#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */
#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */
#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */
#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */
/* the following processors are not speedstep-capable and are not auto-detected
* in speedstep_detect_processor(). However, their speed can be detected using
* the speedstep_get_processor_frequency() call. */
#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */
#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */
#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */
* the speedstep_get_frequency() call. */
#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */
#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */
#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */
/* speedstep states -- only two of them */
......@@ -34,7 +34,7 @@
extern unsigned int speedstep_detect_processor (void);
/* detect the current speed (in khz) of the processor */
extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
extern unsigned int speedstep_get_frequency(unsigned int processor);
/* detect the low and high speeds of the processor. The callback
......
arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
View file @ bbfebd66
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7