ide: use ide_tune_dma() part #2

Use ide_tune_dma() in ide-cris/it821x/pdc202xx_old/serverworks drivers.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 5fd216bb
...@@ -1002,18 +1002,6 @@ static int cris_ide_build_dmatable (ide_drive_t *drive) ...@@ -1002,18 +1002,6 @@ static int cris_ide_build_dmatable (ide_drive_t *drive)
return 1; /* let the PIO routines handle this weirdness */ return 1; /* let the PIO routines handle this weirdness */
} }
static int cris_config_drive_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
speed_cris_ide(drive, speed);
return ide_dma_enable(drive);
}
/* /*
* cris_dma_intr() is the handler for disk read/write DMA interrupts * cris_dma_intr() is the handler for disk read/write DMA interrupts
*/ */
...@@ -1043,7 +1031,7 @@ static ide_startstop_t cris_dma_intr (ide_drive_t *drive) ...@@ -1043,7 +1031,7 @@ static ide_startstop_t cris_dma_intr (ide_drive_t *drive)
static int cris_dma_check(ide_drive_t *drive) static int cris_dma_check(ide_drive_t *drive)
{ {
if (ide_use_dma(drive) && cris_config_drive_for_dma(drive)) if (ide_tune_dma(drive))
return 0; return 0;
return -1; return -1;
......
...@@ -463,25 +463,6 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) ...@@ -463,25 +463,6 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed)
return ide_config_drive_speed(drive, speed); return ide_config_drive_speed(drive, speed);
} }
/**
* config_chipset_for_dma - configure for DMA
* @drive: drive to configure
*
* Called by the IDE layer when it wants the timings set up.
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (speed == 0)
return 0;
it821x_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
/** /**
* it821x_configure_drive_for_dma - set up for DMA transfers * it821x_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up * @drive: drive we are going to set up
...@@ -494,7 +475,7 @@ static int config_chipset_for_dma (ide_drive_t *drive) ...@@ -494,7 +475,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
static int it821x_config_drive_for_dma (ide_drive_t *drive) static int it821x_config_drive_for_dma (ide_drive_t *drive)
{ {
if (ide_use_dma(drive) && config_chipset_for_dma(drive)) if (ide_tune_dma(drive))
return 0; return 0;
it821x_tuneproc(drive, 255); it821x_tuneproc(drive, 255);
......
...@@ -181,23 +181,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) ...@@ -181,23 +181,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
} }
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
(void)pdc202xx_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive) static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive)
{ {
drive->init_speed = 0; drive->init_speed = 0;
if (ide_use_dma(drive) && config_chipset_for_dma(drive)) if (ide_tune_dma(drive))
return 0; return 0;
if (ide_use_fast_pio(drive)) if (ide_use_fast_pio(drive))
......
...@@ -270,22 +270,11 @@ static void svwks_tune_drive (ide_drive_t *drive, u8 pio) ...@@ -270,22 +270,11 @@ static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
(void)svwks_tune_chipset(drive, XFER_PIO_0 + pio); (void)svwks_tune_chipset(drive, XFER_PIO_0 + pio);
} }
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
(void) svwks_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
static int svwks_config_drive_xfer_rate (ide_drive_t *drive) static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
{ {
drive->init_speed = 0; drive->init_speed = 0;
if (ide_use_dma(drive) && config_chipset_for_dma(drive)) if (ide_tune_dma(drive))
return 0; return 0;
if (ide_use_fast_pio(drive)) if (ide_use_fast_pio(drive))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment