Merge branch 'e1000-7.0.38-k4' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream

drivers/net/e1000/Makefile

 ################################################################################
 #
 # 
-# Copyright(c) 1999 - 2003 Intel Corporation. All rights reserved.
+# Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
 # 
 # This program is free software; you can redistribute it and/or modify it 
 # under the terms of the GNU General Public License as published by the Free 

drivers/net/e1000/e1000_hw.c

@@ -2493,10 +2493,10 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
                  */
                 if(hw->original_fc == e1000_fc_full) {
                     hw->fc = e1000_fc_full;
-                    DEBUGOUT("Flow Control = FULL.\r\n");
+                    DEBUGOUT("Flow Control = FULL.\n");
                 } else {
                     hw->fc = e1000_fc_rx_pause;
-                    DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
+                    DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
                 }
             }
             /* For receiving PAUSE frames ONLY.
@@ -2512,7 +2512,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
                     (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
                     (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                 hw->fc = e1000_fc_tx_pause;
-                DEBUGOUT("Flow Control = TX PAUSE frames only.\r\n");
+                DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
             }
             /* For transmitting PAUSE frames ONLY.
              *
@@ -2527,7 +2527,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
                     !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
                     (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                 hw->fc = e1000_fc_rx_pause;
-                DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
+                DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
             }
             /* Per the IEEE spec, at this point flow control should be
              * disabled.  However, we want to consider that we could
@@ -2553,10 +2553,10 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
                      hw->original_fc == e1000_fc_tx_pause) ||
                     hw->fc_strict_ieee) {
                 hw->fc = e1000_fc_none;
-                DEBUGOUT("Flow Control = NONE.\r\n");
+                DEBUGOUT("Flow Control = NONE.\n");
             } else {
                 hw->fc = e1000_fc_rx_pause;
-                DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
+                DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
             }
 
             /* Now we need to do one last check...  If we auto-
@@ -2581,7 +2581,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
                 return ret_val;
             }
         } else {
-            DEBUGOUT("Copper PHY and Auto Neg has not completed.\r\n");
+            DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
         }
     }
     return E1000_SUCCESS;
@@ -2764,7 +2764,7 @@ e1000_check_for_link(struct e1000_hw *hw)
             hw->autoneg_failed = 1;
             return 0;
         }
-        DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
+        DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
 
         /* Disable auto-negotiation in the TXCW register */
         E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE));
@@ -2789,7 +2789,7 @@ e1000_check_for_link(struct e1000_hw *hw)
     else if(((hw->media_type == e1000_media_type_fiber) ||
              (hw->media_type == e1000_media_type_internal_serdes)) &&
             (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
-        DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\r\n");
+        DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
         E1000_WRITE_REG(hw, TXCW, hw->txcw);
         E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -2852,13 +2852,13 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
 
         if(status & E1000_STATUS_FD) {
             *duplex = FULL_DUPLEX;
-            DEBUGOUT("Full Duplex\r\n");
+            DEBUGOUT("Full Duplex\n");
         } else {
             *duplex = HALF_DUPLEX;
-            DEBUGOUT(" Half Duplex\r\n");
+            DEBUGOUT(" Half Duplex\n");
         }
     } else {
-        DEBUGOUT("1000 Mbs, Full Duplex\r\n");
+        DEBUGOUT("1000 Mbs, Full Duplex\n");
         *speed = SPEED_1000;
         *duplex = FULL_DUPLEX;
     }

drivers/net/e1000/e1000_main.c

@@ -29,45 +29,6 @@
 
 #include "e1000.h"
 
-/* Change Log
- * 7.0.33      3-Feb-2006
- *   o Added another fix for the pass false carrier bit
- * 7.0.32      24-Jan-2006
- *   o Need to rebuild with noew version number for the pass false carrier 
- *     fix in e1000_hw.c
- * 7.0.30      18-Jan-2006
- *   o fixup for tso workaround to disable it for pci-x
- *   o fix mem leak on 82542
- *   o fixes for 10 Mb/s connections and incorrect stats
- * 7.0.28      01/06/2006
- *   o hardware workaround to only set "speed mode" bit for 1G link.
- * 7.0.26      12/23/2005
- *   o wake on lan support modified for device ID 10B5
- *   o fix dhcp + vlan issue not making it to the iAMT firmware
- * 7.0.24      12/9/2005
- *   o New hardware support for the Gigabit NIC embedded in the south bridge
- *   o Fixes to the recycling logic (skb->tail) from IBM LTC
- * 6.3.9	12/16/2005
- *   o incorporate fix for recycled skbs from IBM LTC
- * 6.3.7	11/18/2005
- *   o Honor eeprom setting for enabling/disabling Wake On Lan
- * 6.3.5 	11/17/2005
- *   o Fix memory leak in rx ring handling for PCI Express adapters
- * 6.3.4	11/8/05
- *   o Patch from Jesper Juhl to remove redundant NULL checks for kfree
- * 6.3.2	9/20/05
- *   o Render logic that sets/resets DRV_LOAD as inline functions to 
- *     avoid code replication. If f/w is AMT then set DRV_LOAD only when
- *     network interface is open.
- *   o Handle DRV_LOAD set/reset in cases where AMT uses VLANs.
- *   o Adjust PBA partioning for Jumbo frames using MTU size and not
- *     rx_buffer_len
- * 6.3.1	9/19/05
- *   o Use adapter->tx_timeout_factor in Tx Hung Detect logic 
- *      (e1000_clean_tx_irq)
- *   o Support for 8086:10B5 device (Quad Port)
- */
-
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #ifndef CONFIG_E1000_NAPI
@@ -75,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "7.0.38-k2"DRIVERNAPI
+#define DRV_VERSION "7.0.38-k4"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -221,6 +182,7 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter);
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 static int e1000_resume(struct pci_dev *pdev);
 #endif
+static void e1000_shutdown(struct pci_dev *pdev);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /* for netdump / net console */
@@ -236,8 +198,9 @@ static struct pci_driver e1000_driver = {
 	/* Power Managment Hooks */
 #ifdef CONFIG_PM
 	.suspend  = e1000_suspend,
-	.resume   = e1000_resume
+	.resume   = e1000_resume,
 #endif
+	.shutdown = e1000_shutdown
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -4605,6 +4568,12 @@ e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 #endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+	e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs