Merge tag 's3c64xx-dmaengine' of...

Merge tag 's3c64xx-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into asoc-samsung

ARM: s3c64xx: Convert to dmaengine

This series of commits from Tomasz converting s3c64xx to use dmaengine
rather than the old s3c-dma API missed the v3.13 merge window - Kukjin
said that he'd applied it (which should mean it's OK from a review point
of view) but it didn't make it into -next or a pull request.

Since a s3c64xx based system is one of my primary development platforms
it'd be really helpful if I could merge this into both ASoC and SPI,
I've got some patches for ASoC ready to go converting to use dmaengine
directly which help with multiplatform and there's some other dmaengine
work for SPI in progress too.  I've therefore made this signed tag, it'd
be great if it could be merged into both arm-soc and those two trees.

arch/arm/Kconfig

@@ -723,6 +723,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM

arch/arm/mach-s3c64xx/Kconfig

@@ -17,9 +17,10 @@ config CPU_S3C6410
 	help
 	  Enable S3C6410 CPU support
 
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
+config S3C64XX_PL080
+	bool "S3C64XX DMA using generic PL08x driver"
+	select AMBA_PL08X
+	select SAMSUNG_DMADEV
 
 config S3C64XX_SETUP_SDHCI
 	bool

arch/arm/mach-s3c64xx/Makefile

@@ -26,7 +26,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
 
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
 
 # Device support
 

arch/arm/mach-s3c64xx/common.h

@@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void);
 static inline int s3c64xx_pm_late_initcall(void) { return 0; }
 #endif
 
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */

arch/arm/mach-s3c64xx/include/mach/dma.h

@@ -11,51 +11,48 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#define S3C_DMA_CHANNELS	(16)
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
 
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
 enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
+	DMACH_MAX = 32
+};
 
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
+struct s3c2410_dma_client {
+	char	*name;
 };
 
 static inline bool samsung_dma_has_circular(void)
@@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void)
 
 static inline bool samsung_dma_is_dmadev(void)
 {
-	return false;
+	return true;
 }
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum dma_data_direction	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
 
-#include <plat/dma-core.h>
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
 
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c64xx/pl080.c

+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+	return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+	{
+		.bus_id = "uart0_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_tx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_rx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_tx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_rx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_tx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_rx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_tx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_rx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.periph_buses = PL08X_AHB2,
+	}
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma0_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+			0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+	{
+		.bus_id = "pcm1_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm1_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_out",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_in",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_mic",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pwm",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "external",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma1_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+			0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C64XX_SDMA_SEL);
+
+	if (of_have_populated_dt())
+		return 0;
+
+	amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+	amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s3c64xx_pl080_init);

arch/arm/plat-samsung/devs.c

@@ -1468,6 +1468,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #elif defined(CONFIG_S3C24XX_DMAC)
 	pd.filter = s3c24xx_dma_filter;
 #endif
@@ -1509,8 +1511,10 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
@@ -1550,8 +1554,10 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);

arch/arm/plat-samsung/dma-ops.c

@@ -18,6 +18,12 @@
 
 #include <mach/dma.h>
 
+#if defined(CONFIG_PL330_DMA)
+#define dma_filter pl330_filter
+#elif defined(CONFIG_S3C64XX_PL080)
+#define dma_filter pl08x_filter_id
+#endif
+
 static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 				struct samsung_dma_req *param,
 				struct device *dev, char *ch_name)
@@ -30,7 +36,7 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 	if (dev->of_node)
 		return (unsigned)dma_request_slave_channel(dev, ch_name);
 	else
-		return (unsigned)dma_request_channel(mask, pl330_filter,
+		return (unsigned)dma_request_channel(mask, dma_filter,
 							(void *)dma_ch);
 }
 

drivers/clk/samsung/clk-s3c64xx.c

@@ -331,8 +331,8 @@ static struct samsung_clock_alias s3c64xx_clock_aliases[] = {
 	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
 	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
 	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
-	ALIAS(HCLK_DMA1, NULL, "dma1"),
-	ALIAS(HCLK_DMA0, NULL, "dma0"),
+	ALIAS(HCLK_DMA1, "dma-pl080s.1", "apb_pclk"),
+	ALIAS(HCLK_DMA0, "dma-pl080s.0", "apb_pclk"),
 	ALIAS(HCLK_CAMIF, "s3c-camif", "camif"),
 	ALIAS(HCLK_LCD, "s3c-fb", "lcd"),
 	ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi"),

drivers/spi/Kconfig

@@ -395,7 +395,7 @@ config SPI_S3C24XX_FIQ
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
 	depends on PLAT_SAMSUNG
-	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C64XX_PL080 if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.