Skip to content

L
linux
Commit bf4850bf authored by Matthew Dharm's avatar Matthew Dharm Committed by Linus Torvalds
Browse files
Options

[PATCH] USB: usb-storage: re-organize probe/disconnect 

This patch re-organizes probe and disconnect into smaller functions (which
are all functionally equivalent to the current code).  This allows easier
verification that the code is correct, and will make for easier
implementation of the proper SCSI shutdown code.
parent b900e936
Show whitespace changes
Inline Side-by-side
Showing with 306 additions and 357 deletions
drivers/usb/storage/usb.c
View file @ bf4850bf
......@@ -3,10 +3,11 @@
* $Id: usb.c,v 1.75 2002/04/22 03:39:43 mdharm Exp $
*
* Current development and maintenance by:
* (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
* (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* Developed with the assistance of:
* (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
* (c) 2003 Alan Stern (stern@rowland.harvard.edu)
*
* Initial work by:
* (c) 1999 Michael Gee (michael@linuxspecific.com)
......@@ -297,7 +298,7 @@ static int usb_stor_control_thread(void * __us)
/*
* This thread doesn't need any user-level access,
* so get rid of all our resources..
* so get rid of all our resources.
*/
daemonize("usb-storage");
......@@ -305,9 +306,6 @@ static int usb_stor_control_thread(void * __us)
unlock_kernel();
/* set up for wakeups by new commands */
init_MUTEX_LOCKED(&us->sema);
/* signal that we've started the thread */
complete(&(us->notify));
......@@ -432,272 +430,60 @@ static int usb_stor_control_thread(void * __us)
return 0;
}
/* Set up the URB and the usb_ctrlrequest.
* us->dev_semaphore must already be locked.
* Note that this function assumes that all the data in the us_data
* structure is current.
* Returns non-zero on failure, zero on success
*/
static int usb_stor_allocate_urbs(struct us_data *us)
{
/* calculate and store the pipe values */
us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, us->ep_int);
/* allocate the usb_ctrlrequest for control packets */
US_DEBUGP("Allocating usb_ctrlrequest\n");
us->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
if (!us->dr) {
US_DEBUGP("allocation failed\n");
return 1;
}
/* allocate the URB we're going to use */
US_DEBUGP("Allocating URB\n");
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb) {
US_DEBUGP("allocation failed\n");
return 2;
}
US_DEBUGP("Allocating scatter-gather request block\n");
us->current_sg = kmalloc(sizeof(*us->current_sg), GFP_KERNEL);
if (!us->current_sg) {
US_DEBUGP("allocation failed\n");
return 5;
}
return 0; /* success */
}
/* Deallocate the URB, the usb_ctrlrequest, and the IRQ pipe.
* us->dev_semaphore must already be locked.
*/
static void usb_stor_deallocate_urbs(struct us_data *us)
{
/* free the scatter-gather request block */
if (us->current_sg) {
kfree(us->current_sg);
us->current_sg = NULL;
}
/* free up the main URB for this device */
if (us->current_urb) {
US_DEBUGP("-- releasing main URB\n");
usb_free_urb(us->current_urb);
us->current_urb = NULL;
}
/* free the usb_ctrlrequest buffer */
if (us->dr) {
kfree(us->dr);
us->dr = NULL;
}
/* mark the device as gone */
usb_put_dev(us->pusb_dev);
us->pusb_dev = NULL;
}
/***********************************************************************
* Device probing and disconnecting
***********************************************************************/
/* Probe to see if a new device is actually a SCSI device */
static int storage_probe(struct usb_interface *intf,
const struct usb_device_id *id)
/* Get the unusual_devs entries and the string descriptors */
static void get_device_info(struct us_data *us,
struct us_unusual_dev *unusual_dev)
{
struct usb_device *dev = interface_to_usbdev(intf);
int ifnum = intf->altsetting->desc.bInterfaceNumber;
int i;
const int id_index = id - storage_usb_ids;
char mf[USB_STOR_STRING_LEN]; /* manufacturer */
char prod[USB_STOR_STRING_LEN]; /* product */
char serial[USB_STOR_STRING_LEN]; /* serial number */
unsigned int flags;
struct us_unusual_dev *unusual_dev;
struct us_data *us = NULL;
int result;
/* these are temporary copies -- we test on these, then put them
* in the us-data structure
*/
struct usb_endpoint_descriptor *ep_in = NULL;
struct usb_endpoint_descriptor *ep_out = NULL;
struct usb_endpoint_descriptor *ep_int = NULL;
u8 subclass = 0;
u8 protocol = 0;
/* the altsetting on the interface we're probing that matched our
* usb_match_id table
*/
struct usb_host_interface *altsetting =
intf[ifnum].altsetting + intf[ifnum].act_altsetting;
US_DEBUGP("act_altsetting is %d\n", intf[ifnum].act_altsetting);
/* clear the temporary strings */
memset(mf, 0, sizeof(mf));
memset(prod, 0, sizeof(prod));
memset(serial, 0, sizeof(serial));
struct usb_device *dev = us->pusb_dev;
/*
* Can we support this device, either because we know about it
* from our unusual device list, or because it advertises that it's
* compliant to the specification?
*
* id_index is calculated in the declaration to be the index number
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
US_DEBUGP("id_index calculated to be: %d\n", id_index);
US_DEBUGP("Array length appears to be: %d\n", sizeof(us_unusual_dev_list) / sizeof(us_unusual_dev_list[0]));
if (id_index <
sizeof(us_unusual_dev_list) / sizeof(us_unusual_dev_list[0])) {
unusual_dev = &us_unusual_dev_list[id_index];
if (unusual_dev->vendorName)
US_DEBUGP("Vendor: %s\n", unusual_dev->vendorName);
if (unusual_dev->productName)
US_DEBUGP("Product: %s\n", unusual_dev->productName);
} else
/* no, we can't support it */
return -EIO;
/* At this point, we know we've got a live one */
US_DEBUGP("USB Mass Storage device detected\n");
/* Determine subclass and protocol, or copy from the interface */
subclass = unusual_dev->useProtocol;
protocol = unusual_dev->useTransport;
flags = unusual_dev->flags;
/*
* Find the endpoints we need
* We are expecting a minimum of 2 endpoints - in and out (bulk).
* An optional interrupt is OK (necessary for CBI protocol).
* We will ignore any others.
*/
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
struct usb_endpoint_descriptor *ep;
ep = &altsetting->endpoint[i].desc;
/* is it an BULK endpoint? */
if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_BULK) {
/* BULK in or out? */
if (ep->bEndpointAddress & USB_DIR_IN)
ep_in = ep;
else
ep_out = ep;
}
/* is it an interrupt endpoint? */
else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_INT) {
ep_int = ep;
}
}
US_DEBUGP("Endpoints: In: 0x%p Out: 0x%p Int: 0x%p (Period %d)\n",
ep_in, ep_out, ep_int, ep_int ? ep_int->bInterval : 0);
#ifdef CONFIG_USB_STORAGE_SDDR09
if (protocol == US_PR_EUSB_SDDR09 || protocol == US_PR_DPCM_USB) {
/* set the configuration -- STALL is an acceptable response here */
result = usb_set_configuration(dev, 1);
US_DEBUGP("Result from usb_set_configuration is %d\n", result);
if (result == -EPIPE) {
US_DEBUGP("-- stall on control interface\n");
} else if (result != 0) {
/* it's not a stall, but another error -- time to bail */
US_DEBUGP("-- Unknown error. Rejecting device\n");
return -EIO;
}
}
#endif
/* Do some basic sanity checks, and bail if we find a problem */
if (!ep_in || !ep_out || (protocol == US_PR_CBI && !ep_int)) {
US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
}
/* At this point, we've decided to try to use the device */
usb_get_dev(dev);
/* Store the entries */
us->unusual_dev = unusual_dev;
us->subclass = unusual_dev->useProtocol;
us->protocol = unusual_dev->useTransport;
us->flags = unusual_dev->flags;
/* fetch the strings */
/* Read the device's string descriptors */
if (dev->descriptor.iManufacturer)
usb_string(dev, dev->descriptor.iManufacturer,
mf, sizeof(mf));
us->vendor, sizeof(us->vendor));
if (dev->descriptor.iProduct)
usb_string(dev, dev->descriptor.iProduct,
prod, sizeof(prod));
if (dev->descriptor.iSerialNumber && !(flags & US_FL_IGNORE_SER))
us->product, sizeof(us->product));
if (dev->descriptor.iSerialNumber && !(us->flags & US_FL_IGNORE_SER))
usb_string(dev, dev->descriptor.iSerialNumber,
serial, sizeof(serial));
/* New device -- allocate memory and initialize */
if ((us = (struct us_data *)kmalloc(sizeof(struct us_data),
GFP_KERNEL)) == NULL) {
printk(KERN_WARNING USB_STORAGE "Out of memory\n");
usb_put_dev(dev);
return -ENOMEM;
}
memset(us, 0, sizeof(struct us_data));
/* Initialize the mutexes only when the struct is new */
init_completion(&(us->notify));
init_MUTEX_LOCKED(&(us->dev_semaphore));
/* copy over the subclass and protocol data */
us->subclass = subclass;
us->protocol = protocol;
us->flags = flags;
us->unusual_dev = unusual_dev;
/* copy over the endpoint data */
us->ep_in = ep_in->bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
us->ep_out = ep_out->bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
if (ep_int) {
us->ep_int = ep_int->bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
us->ep_bInterval = ep_int->bInterval;
}
else
us->ep_int = us->ep_bInterval = 0;
/* establish the connection to the new device */
us->ifnum = ifnum;
us->pusb_dev = dev;
us->serial, sizeof(us->serial));
/* copy over the identifiying strings */
strncpy(us->vendor, mf, USB_STOR_STRING_LEN);
strncpy(us->product, prod, USB_STOR_STRING_LEN);
strncpy(us->serial, serial, USB_STOR_STRING_LEN);
/* Use the unusual_dev strings if the device didn't provide them */
if (strlen(us->vendor) == 0) {
if (unusual_dev->vendorName)
strncpy(us->vendor, unusual_dev->vendorName,
USB_STOR_STRING_LEN);
sizeof(us->vendor) - 1);
else
strncpy(us->vendor, "Unknown",
USB_STOR_STRING_LEN);
strcpy(us->vendor, "Unknown");
}
if (strlen(us->product) == 0) {
if (unusual_dev->productName)
strncpy(us->product, unusual_dev->productName,
USB_STOR_STRING_LEN);
sizeof(us->product) - 1);
else
strncpy(us->product, "Unknown",
USB_STOR_STRING_LEN);
strcpy(us->product, "Unknown");
}
if (strlen(us->serial) == 0)
strncpy(us->serial, "None", USB_STOR_STRING_LEN);
strcpy(us->serial, "None");
}
/*
* Set the handler pointers based on the protocol
* Again, this data is persistent across reattachments
*/
/* Get the transport settings */
static int get_transport(struct us_data *us)
{
switch (us->protocol) {
case US_PR_CB:
us->transport_name = "Control/Bulk";
......@@ -783,15 +569,19 @@ static int storage_probe(struct usb_interface *intf,
#endif
default:
/* us->transport_name = "Unknown"; */
goto BadDevice;
return -EIO;
}
US_DEBUGP("Transport: %s\n", us->transport_name);
/* fix for single-lun devices */
if (us->flags & US_FL_SINGLE_LUN)
us->max_lun = 0;
return 0;
}
/* Get the protocol settings */
static int get_protocol(struct us_data *us)
{
switch (us->subclass) {
case US_SC_RBC:
us->protocol_name = "Reduced Block Commands (RBC)";
......@@ -834,173 +624,335 @@ static int storage_probe(struct usb_interface *intf,
#endif
default:
/* us->protocol_name = "Unknown"; */
goto BadDevice;
return -EIO;
}
US_DEBUGP("Protocol: %s\n", us->protocol_name);
return 0;
}
/* allocate the URB, the usb_ctrlrequest, and the IRQ URB */
if (usb_stor_allocate_urbs(us))
goto BadDevice;
/* Get the pipe settings */
static int get_pipes(struct us_data *us)
{
struct usb_host_interface *altsetting =
&us->pusb_intf->altsetting[us->pusb_intf->act_altsetting];
int i;
struct usb_endpoint_descriptor *ep;
struct usb_endpoint_descriptor *ep_in = NULL;
struct usb_endpoint_descriptor *ep_out = NULL;
struct usb_endpoint_descriptor *ep_int = NULL;
/*
* Find the endpoints we need.
* We are expecting a minimum of 2 endpoints - in and out (bulk).
* An optional interrupt is OK (necessary for CBI protocol).
* We will ignore any others.
*/
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
ep = &altsetting->endpoint[i].desc;
/* Is it a BULK endpoint? */
if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_BULK) {
/* BULK in or out? */
if (ep->bEndpointAddress & USB_DIR_IN)
ep_in = ep;
else
ep_out = ep;
}
/* Is it an interrupt endpoint? */
else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_INT) {
ep_int = ep;
}
}
US_DEBUGP("Endpoints: In: 0x%p Out: 0x%p Int: 0x%p (Period %d)\n",
ep_in, ep_out, ep_int, ep_int ? ep_int->bInterval : 0);
if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
}
/* Calculate and store the pipe values */
us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
if (ep_int) {
us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
us->ep_bInterval = ep_int->bInterval;
}
return 0;
}
/* Initialize all the dynamic resources we need */
static int usb_stor_acquire_resources(struct us_data *us)
{
int p;
/* Allocate the USB control blocks */
US_DEBUGP("Allocating usb_ctrlrequest\n");
us->dr = kmalloc(sizeof(*us->dr), GFP_KERNEL);
if (!us->dr) {
US_DEBUGP("allocation failed\n");
return -ENOMEM;
}
US_DEBUGP("Allocating URB\n");
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb) {
US_DEBUGP("allocation failed\n");
return -ENOMEM;
}
US_DEBUGP("Allocating scatter-gather request block\n");
us->current_sg = kmalloc(sizeof(*us->current_sg), GFP_KERNEL);
if (!us->current_sg) {
US_DEBUGP("allocation failed\n");
return -ENOMEM;
}
/* Lock the device while we carry out the next two operations */
down(&us->dev_semaphore);
/* For bulk-only devices, determine the max LUN value */
if (us->protocol == US_PR_BULK)
us->max_lun = usb_stor_Bulk_max_lun(us);
/*
* Since this is a new device, we need to generate a scsi
* host definition, and register with the higher SCSI layers
*/
/* Just before we start our control thread, initialize
* the device if it needs initialization */
if (unusual_dev && unusual_dev->initFunction)
unusual_dev->initFunction(us);
if (us->unusual_dev->initFunction)
us->unusual_dev->initFunction(us);
up(&us->dev_semaphore);
/* start up our control thread */
/* Start up our control thread */
atomic_set(&us->sm_state, US_STATE_IDLE);
us->pid = kernel_thread(usb_stor_control_thread, us,
CLONE_VM);
if (us->pid < 0) {
p = kernel_thread(usb_stor_control_thread, us, CLONE_VM);
if (p < 0) {
printk(KERN_WARNING USB_STORAGE
"Unable to start control thread\n");
goto BadDevice;
return p;
}
us->pid = p;
/* wait for the thread to start */
/* Wait for the thread to start */
wait_for_completion(&(us->notify));
/* unlock the device pointers */
up(&(us->dev_semaphore));
/* now register */
/*
* Since this is a new device, we need to register a SCSI
* host definition with the higher SCSI layers.
*/
us->host = scsi_register(&usb_stor_host_template, sizeof(us));
if (!us->host) {
printk(KERN_WARNING USB_STORAGE
"Unable to register the scsi host\n");
return -EBUSY;
}
/* tell the control thread to exit */
us->srb = NULL;
up(&us->sema);
wait_for_completion(&us->notify);
/* Set the hostdata to prepare for scanning */
us->host->hostdata[0] = (unsigned long) us;
return 0;
}
/* re-lock the device pointers */
/* Dissociate from the USB device */
static void dissociate_dev(struct us_data *us)
{
US_DEBUGP("-- %s\n", __FUNCTION__);
down(&us->dev_semaphore);
usb_set_intfdata(us->pusb_intf, NULL);
usb_put_dev(us->pusb_dev);
us->pusb_dev = NULL;
us->pusb_intf = NULL;
up(&us->dev_semaphore);
}
/* Release all our static and dynamic resources */
void usb_stor_release_resources(struct us_data *us)
{
/*
* The host must already have been removed
* and dissociate_dev() must have been called.
*/
/* Finish the SCSI host removal sequence */
if (us->host) {
(struct us_data *) us->host->hostdata[0] = NULL;
scsi_unregister(us->host);
}
/* Kill the control thread
*
* Enqueue the command, wake up the thread, and wait for
* notification that it has exited.
*/
if (us->pid) {
US_DEBUGP("-- sending exit command to thread\n");
BUG_ON(atomic_read(&us->sm_state) != US_STATE_IDLE);
us->srb = NULL;
up(&(us->sema));
wait_for_completion(&(us->notify));
}
/* Call the destructor routine, if it exists */
if (us->extra_destructor) {
US_DEBUGP("-- calling extra_destructor()\n");
us->extra_destructor(us->extra);
}
/* Destroy the extra data */
if (us->extra) {
kfree(us->extra);
}
/* Free the USB control blocks */
if (us->current_sg)
kfree(us->current_sg);
if (us->current_urb)
usb_free_urb(us->current_urb);
if (us->dr)
kfree(us->dr);
/* Free the structure itself */
kfree(us);
US_DEBUGP("-- %s finished\n", __FUNCTION__);
}
/* Probe to see if we can drive a newly-connected USB device */
static int storage_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct us_data *us;
const int id_index = id - storage_usb_ids;
int result;
US_DEBUGP("USB Mass Storage device detected\n");
US_DEBUGP("act_altsetting is %d, id_index is %d\n",
intf->act_altsetting, id_index);
/* Allocate the us_data structure and initialize the mutexes */
us = (struct us_data *) kmalloc(sizeof(*us), GFP_KERNEL);
if (!us) {
printk(KERN_WARNING USB_STORAGE "Out of memory\n");
return -ENOMEM;
}
memset(us, 0, sizeof(struct us_data));
init_MUTEX(&(us->dev_semaphore));
init_MUTEX_LOCKED(&(us->sema));
init_completion(&(us->notify));
/* Fill in the device-related fields */
us->pusb_dev = interface_to_usbdev(intf);
us->pusb_intf = intf;
us->ifnum = intf->altsetting->desc.bInterfaceNumber;
/* Store our private data in the interface and increment the
* device's reference count */
usb_set_intfdata(intf, us);
usb_get_dev(us->pusb_dev);
/*
* Get the unusual_devs entries and the descriptors
*
* id_index is calculated in the declaration to be the index number
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
get_device_info(us, &us_unusual_dev_list[id_index]);
#ifdef CONFIG_USB_STORAGE_SDDR09
if (us->protocol == US_PR_EUSB_SDDR09 ||
us->protocol == US_PR_DPCM_USB) {
/* set the configuration -- STALL is an acceptable response here */
result = usb_set_configuration(us->pusb_dev, 1);
US_DEBUGP("Result from usb_set_configuration is %d\n", result);
if (result == -EPIPE) {
US_DEBUGP("-- stall on control interface\n");
} else if (result != 0) {
/* it's not a stall, but another error -- time to bail */
US_DEBUGP("-- Unknown error. Rejecting device\n");
goto BadDevice;
}
}
#endif
/* set the hostdata to prepare for scanning */
us->host->hostdata[0] = (unsigned long)us;
/* Get the transport, protocol, and pipe settings */
result = get_transport(us);
if (result)
goto BadDevice;
result = get_protocol(us);
if (result)
goto BadDevice;
result = get_pipes(us);
if (result)
goto BadDevice;
/* now add the host */
/* Acquire all the other resources */
result = usb_stor_acquire_resources(us);
if (result)
goto BadDevice;
/* Finally, add the host (this does SCSI device scanning) */
result = scsi_add_host(us->host, &intf->dev);
if (result) {
printk(KERN_WARNING USB_STORAGE
"Unable to add the scsi host\n");
/* tell the control thread to exit */
us->srb = NULL;
up(&us->sema);
wait_for_completion(&us->notify);
/* re-lock the device pointers */
down(&us->dev_semaphore);
goto BadDevice;
}
printk(KERN_DEBUG
"WARNING: USB Mass Storage data integrity not assured\n");
printk(KERN_DEBUG
"USB Mass Storage device found at %d\n", dev->devnum);
/* save a pointer to our structure */
usb_set_intfdata(intf, us);
"USB Mass Storage device found at %d\n", us->pusb_dev->devnum);
return 0;
/* we come here if there are any problems */
/* us->dev_semaphore must be locked */
/* We come here if there are any problems */
BadDevice:
US_DEBUGP("storage_probe() failed\n");
usb_stor_deallocate_urbs(us);
up(&us->dev_semaphore);
kfree(us);
return -EIO;
dissociate_dev(us);
usb_stor_release_resources(us);
return result;
}
/* Handle a disconnect event from the USB core */
static void storage_disconnect(struct usb_interface *intf)
{
struct us_data *us;
struct us_data *us = usb_get_intfdata(intf);
struct scsi_device *sdev;
US_DEBUGP("storage_disconnect() called\n");
us = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
/* set devices offline -- need host lock for this */
/* Set devices offline -- need host lock for this */
scsi_lock(us->host);
list_for_each_entry(sdev, &us->host->my_devices, siblings)
sdev->online = 0;
scsi_unlock(us->host);
/* prevent new USB transfers and stop the current command */
/* Prevent new USB transfers and stop the current command */
set_bit(US_FLIDX_DISCONNECTING, &us->flags);
usb_stor_stop_transport(us);
/* lock device access -- no need to unlock, as we're going away */
down(&(us->dev_semaphore));
/* TODO: somehow, wait for the device to
* be 'idle' (tasklet completion) */
/* remove the pointer to the data structure we were using */
(struct us_data*)us->host->hostdata[0] = NULL;
/* Dissociate from the USB device */
dissociate_dev(us);
/* begin SCSI host removal sequence */
if(scsi_remove_host(us->host)) {
US_DEBUGP("-- SCSI refused to unregister\n");
/* Begin the SCSI host removal sequence */
if (scsi_remove_host(us->host)) {
US_DEBUGP("-- SCSI refused to remove the host\n");
BUG();
return;
};
/* finish SCSI host removal sequence */
scsi_unregister(us->host);
/* Kill the control threads
*
* Enqueue the command, wake up the thread, and wait for
* notification that it has exited.
*/
US_DEBUGP("-- sending exit command to thread\n");
BUG_ON(atomic_read(&us->sm_state) != US_STATE_IDLE);
us->srb = NULL;
up(&(us->sema));
wait_for_completion(&(us->notify));
/* free allocated urbs */
usb_stor_deallocate_urbs(us);
/* If there's extra data in the us_data structure then
* free that first */
if (us->extra) {
/* call the destructor routine, if it exists */
if (us->extra_destructor) {
US_DEBUGP("-- calling extra_destructor()\n");
us->extra_destructor(us->extra);
}
/* destroy the extra data */
US_DEBUGP("-- freeing the data structure\n");
kfree(us->extra);
}
/* up the semaphore so auto-code-checkers won't complain about
* the down/up imbalance */
up(&(us->dev_semaphore));
/* TODO: somehow, wait for the device to
* be 'idle' (tasklet completion) */
/* free the structure itself */
kfree (us);
/* Release all our other resources */
usb_stor_release_resources(us);
}
/***********************************************************************
......
drivers/usb/storage/usb.h
View file @ bf4850bf
......@@ -107,6 +107,7 @@ struct us_data {
*/
struct semaphore dev_semaphore; /* protect pusb_dev */
struct usb_device *pusb_dev; /* this usb_device */
struct usb_interface *pusb_intf; /* this interface */
unsigned long flags; /* from filter initially */
unsigned int send_bulk_pipe; /* cached pipe values */
unsigned int recv_bulk_pipe;
......@@ -114,7 +115,7 @@ struct us_data {
unsigned int recv_ctrl_pipe;
unsigned int recv_intr_pipe;
/* information about the device -- always good */
/* information about the device */
char vendor[USB_STOR_STRING_LEN];
char product[USB_STOR_STRING_LEN];
char serial[USB_STOR_STRING_LEN];
......@@ -124,11 +125,7 @@ struct us_data {
u8 protocol;
u8 max_lun;
/* information about the device -- only good if device is attached */
u8 ifnum; /* interface number */
u8 ep_in; /* bulk in endpoint */
u8 ep_out; /* bulk out endpoint */
u8 ep_int; /* interrupt endpoint */
u8 ep_bInterval; /* interrupt interval */
/* function pointers for this device */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7