vxge/s2io: remove dead URLs

URLs to neterion.com and s2io.com no longer resolve.  Remove all references to
these URLs in the driver source and documentation.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/s2io.txt

@@ -136,16 +136,6 @@ For more information, please review the AMD8131 errata at
 http://vip.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/
 26310_AMD-8131_HyperTransport_PCI-X_Tunnel_Revision_Guide_rev_3_18.pdf
 
-6.  Available Downloads
-Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up 
-to date, also the latest "s2io" code (including support for 2.4 kernels) is 
-available via "Support" link on the Neterion site:  http://www.neterion.com.
-
-For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com,
-user: linuxdocs password: HALdocs
-
-7. Support 
+6. Support
 For further support please contact either your 10GbE Xframe NIC vendor (IBM, 
-HP, SGI etc.) or click on the "Support" link on the Neterion site:  
-http://www.neterion.com.
-
+HP, SGI etc.)

Documentation/networking/vxge.txt

@@ -91,10 +91,3 @@ v)  addr_learn_en
        virtualization environment.
        Valid range: 0,1 (disabled, enabled respectively)
        Default: 0
-
-4) Troubleshooting:
--------------------
-
-To resolve an issue with the source code or X3100 series adapter, please collect
-the statistics, register dumps using ethool, relevant logs and email them to
-support@neterion.com.

MAINTAINERS

@@ -4638,8 +4638,6 @@ F:	net/sched/sch_netem.c
 NETERION 10GbE DRIVERS (s2io/vxge)
 M:	Jon Mason <jdmason@kudzu.us>
 L:	netdev@vger.kernel.org
-W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
-W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
 S:	Supported
 F:	Documentation/networking/s2io.txt
 F:	Documentation/networking/vxge.txt

drivers/net/ethernet/neterion/vxge/vxge-main.c

@@ -4261,9 +4261,7 @@ static int vxge_probe_fw_update(struct vxgedev *vdev)
 	if (VXGE_FW_VER(VXGE_CERT_FW_VER_MAJOR, VXGE_CERT_FW_VER_MINOR, 0) >
 	    VXGE_FW_VER(maj, min, 0)) {
 		vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d is too old to"
-				" be used with this driver.\n"
-				"Please get the latest version from "
-				"ftp://ftp.s2io.com/pub/X3100-Drivers/FIRMWARE",
+				" be used with this driver.",
 				VXGE_DRIVER_NAME, maj, min, bld);
 		return -EINVAL;
 	}