Merge branch 'spi-4.20' into spi-4.21 for bcm stuff.

drivers/spi/spi-bcm2835.c

@@ -155,8 +155,7 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
 	/* Write as many bytes as possible to FIFO */
 	bcm2835_wr_fifo(bs);
 
-	/* based on flags decide if we can finish the transfer */
-	if (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE) {
+	if (!bs->rx_len) {
 		/* Transfer complete - reset SPI HW */
 		bcm2835_spi_reset_hw(master);
 		/* wake up the framework */
@@ -233,10 +232,9 @@ static void bcm2835_spi_dma_done(void *data)
 	 * is called the tx-dma must have finished - can't get to this
 	 * situation otherwise...
 	 */
-	dmaengine_terminate_all(master->dma_tx);
-
-	/* mark as no longer pending */
-	bs->dma_pending = 0;
+	if (cmpxchg(&bs->dma_pending, true, false)) {
+		dmaengine_terminate_all(master->dma_tx);
+	}
 
 	/* and mark as completed */;
 	complete(&master->xfer_completion);
@@ -342,6 +340,7 @@ static int bcm2835_spi_transfer_one_dma(struct spi_master *master,
 	if (ret) {
 		/* need to reset on errors */
 		dmaengine_terminate_all(master->dma_tx);
+		bs->dma_pending = false;
 		bcm2835_spi_reset_hw(master);
 		return ret;
 	}
@@ -617,10 +616,9 @@ static void bcm2835_spi_handle_err(struct spi_master *master,
 	struct bcm2835_spi *bs = spi_master_get_devdata(master);
 
 	/* if an error occurred and we have an active dma, then terminate */
-	if (bs->dma_pending) {
+	if (cmpxchg(&bs->dma_pending, true, false)) {
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
-		bs->dma_pending = 0;
 	}
 	/* and reset */
 	bcm2835_spi_reset_hw(master);

drivers/spi/spi-omap2-mcspi.c

@@ -1540,13 +1540,26 @@ static int omap2_mcspi_remove(struct platform_device *pdev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:omap2_mcspi");
 
-#ifdef	CONFIG_SUSPEND
-static int omap2_mcspi_suspend_noirq(struct device *dev)
+static int __maybe_unused omap2_mcspi_suspend(struct device *dev)
 {
-	return pinctrl_pm_select_sleep_state(dev);
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+	int error;
+
+	error = pinctrl_pm_select_sleep_state(dev);
+	if (error)
+		dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
+			 __func__, error);
+
+	error = spi_master_suspend(master);
+	if (error)
+		dev_warn(mcspi->dev, "%s: master suspend failed: %i\n",
+			 __func__, error);
+
+	return pm_runtime_force_suspend(dev);
 }
 
-static int omap2_mcspi_resume_noirq(struct device *dev)
+static int __maybe_unused omap2_mcspi_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
@@ -1557,17 +1570,17 @@ static int omap2_mcspi_resume_noirq(struct device *dev)
 		dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
 			 __func__, error);
 
-	return 0;
-}
+	error = spi_master_resume(master);
+	if (error)
+		dev_warn(mcspi->dev, "%s: master resume failed: %i\n",
+			 __func__, error);
 
-#else
-#define omap2_mcspi_suspend_noirq	NULL
-#define omap2_mcspi_resume_noirq	NULL
-#endif
+	return pm_runtime_force_resume(dev);
+}
 
 static const struct dev_pm_ops omap2_mcspi_pm_ops = {
-	.suspend_noirq = omap2_mcspi_suspend_noirq,
-	.resume_noirq = omap2_mcspi_resume_noirq,
+	SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend,
+				omap2_mcspi_resume)
 	.runtime_resume	= omap_mcspi_runtime_resume,
 };