Commit c0f00588 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Staging: add me4000 pci data collection driver

Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>

TODO:
	- checkpatch.pl cleanups
	- sparse cleanups
	- possible /proc interaction cleanups
	- more info needed for Kconfig entry
	- real device id?
	- module parameter cleanup

Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent cff338a9
......@@ -29,4 +29,6 @@ source "drivers/staging/slicoss/Kconfig"
source "drivers/staging/sxg/Kconfig"
source "drivers/staging/me4000/Kconfig"
endif # STAGING
......@@ -3,3 +3,4 @@
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_SXG) += sxg/
obj-$(CONFIG_ME4000) += me4000/
config ME4000
tristate "Meilhaus ME-4000 support"
default n
depends on PCI
help
This driver supports the Meilhaus ME-4000 family of boards
that do data collection and multipurpose I/O.
To compile this driver as a module, choose M here: the module
will be called me4000.
obj-$(CONFIG_ME4000) += me4000.o
TODO:
- checkpatch.pl cleanups
- sparse cleanups
- possible /proc interaction cleanups
- more info needed for Kconfig entry
- real device id?
- module parameter cleanup
Please send patches to Greg Kroah-Hartman <gregkh@suse.de>
and Cc: Wolfgang Beiter <w.beiter@aon.at> and
Guenter Gebhardt <g.gebhardt@meilhaus.de>
This source diff could not be displayed because it is too large. You can view the blob instead.
/*
* Copyright (C) 2003 Meilhaus Electronic GmbH (support@meilhaus.de)
*
* Source File : me4000.h
* Author : GG (Guenter Gebhardt) <g.gebhardt@meilhaus.de>
*/
#ifndef _ME4000_H_
#define _ME4000_H_
#ifdef __KERNEL__
/*=============================================================================
The version of the driver release
===========================================================================*/
#define ME4000_DRIVER_VERSION 0x10009 // Version 1.00.09
/*=============================================================================
Debug section
===========================================================================*/
#undef ME4000_CALL_DEBUG // Debug function entry and exit
#undef ME4000_ISR_DEBUG // Debug the interrupt service routine
#undef ME4000_PORT_DEBUG // Debug port access
#undef ME4000_DEBUG // General purpose debug masseges
#ifdef ME4000_CALL_DEBUG
#undef CALL_PDEBUG
#define CALL_PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
# define CALL_PDEBUG(fmt, args...) // no debugging, do nothing
#endif
#ifdef ME4000_ISR_DEBUG
#undef ISR_PDEBUG
#define ISR_PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
#define ISR_PDEBUG(fmt, args...) // no debugging, do nothing
#endif
#ifdef ME4000_PORT_DEBUG
#undef PORT_PDEBUG
#define PORT_PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
#define PORT_PDEBUG(fmt, args...) // no debugging, do nothing
#endif
#ifdef ME4000_DEBUG
#undef PDEBUG
#define PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
#define PDEBUG(fmt, args...) // no debugging, do nothing
#endif
/*=============================================================================
PCI vendor and device IDs
===========================================================================*/
#define PCI_VENDOR_ID_MEILHAUS 0x1402
#define PCI_DEVICE_ID_MEILHAUS_ME4650 0x4650 // Low Cost version
#define PCI_DEVICE_ID_MEILHAUS_ME4660 0x4660 // Standard version
#define PCI_DEVICE_ID_MEILHAUS_ME4660I 0x4661 // Isolated version
#define PCI_DEVICE_ID_MEILHAUS_ME4660S 0x4662 // Standard version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4660IS 0x4663 // Isolated version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4670 0x4670 // Standard version
#define PCI_DEVICE_ID_MEILHAUS_ME4670I 0x4671 // Isolated version
#define PCI_DEVICE_ID_MEILHAUS_ME4670S 0x4672 // Standard version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4670IS 0x4673 // Isolated version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4680 0x4680 // Standard version
#define PCI_DEVICE_ID_MEILHAUS_ME4680I 0x4681 // Isolated version
#define PCI_DEVICE_ID_MEILHAUS_ME4680S 0x4682 // Standard version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4680IS 0x4683 // Isolated version with Sample and Hold
/*=============================================================================
Device names, for entries in /proc/..
===========================================================================*/
#define ME4000_NAME "me4000"
#define ME4000_AO_NAME "me4000_ao"
#define ME4000_AI_NAME "me4000_ai"
#define ME4000_DIO_NAME "me4000_dio"
#define ME4000_CNT_NAME "me4000_cnt"
#define ME4000_EXT_INT_NAME "me4000_ext_int"
/*=============================================================================
ME-4000 base register offsets
===========================================================================*/
#define ME4000_AO_00_CTRL_REG 0x00 // R/W
#define ME4000_AO_00_STATUS_REG 0x04 // R/_
#define ME4000_AO_00_FIFO_REG 0x08 // _/W
#define ME4000_AO_00_SINGLE_REG 0x0C // R/W
#define ME4000_AO_00_TIMER_REG 0x10 // _/W
#define ME4000_AO_01_CTRL_REG 0x18 // R/W
#define ME4000_AO_01_STATUS_REG 0x1C // R/_
#define ME4000_AO_01_FIFO_REG 0x20 // _/W
#define ME4000_AO_01_SINGLE_REG 0x24 // R/W
#define ME4000_AO_01_TIMER_REG 0x28 // _/W
#define ME4000_AO_02_CTRL_REG 0x30 // R/W
#define ME4000_AO_02_STATUS_REG 0x34 // R/_
#define ME4000_AO_02_FIFO_REG 0x38 // _/W
#define ME4000_AO_02_SINGLE_REG 0x3C // R/W
#define ME4000_AO_02_TIMER_REG 0x40 // _/W
#define ME4000_AO_03_CTRL_REG 0x48 // R/W
#define ME4000_AO_03_STATUS_REG 0x4C // R/_
#define ME4000_AO_03_FIFO_REG 0x50 // _/W
#define ME4000_AO_03_SINGLE_REG 0x54 // R/W
#define ME4000_AO_03_TIMER_REG 0x58 // _/W
#define ME4000_AI_CTRL_REG 0x74 // _/W
#define ME4000_AI_STATUS_REG 0x74 // R/_
#define ME4000_AI_CHANNEL_LIST_REG 0x78 // _/W
#define ME4000_AI_DATA_REG 0x7C // R/_
#define ME4000_AI_CHAN_TIMER_REG 0x80 // _/W
#define ME4000_AI_CHAN_PRE_TIMER_REG 0x84 // _/W
#define ME4000_AI_SCAN_TIMER_LOW_REG 0x88 // _/W
#define ME4000_AI_SCAN_TIMER_HIGH_REG 0x8C // _/W
#define ME4000_AI_SCAN_PRE_TIMER_LOW_REG 0x90 // _/W
#define ME4000_AI_SCAN_PRE_TIMER_HIGH_REG 0x94 // _/W
#define ME4000_AI_START_REG 0x98 // R/_
#define ME4000_IRQ_STATUS_REG 0x9C // R/_
#define ME4000_DIO_PORT_0_REG 0xA0 // R/W
#define ME4000_DIO_PORT_1_REG 0xA4 // R/W
#define ME4000_DIO_PORT_2_REG 0xA8 // R/W
#define ME4000_DIO_PORT_3_REG 0xAC // R/W
#define ME4000_DIO_DIR_REG 0xB0 // R/W
#define ME4000_AO_LOADSETREG_XX 0xB4 // R/W
#define ME4000_DIO_CTRL_REG 0xB8 // R/W
#define ME4000_AO_DEMUX_ADJUST_REG 0xBC // -/W
#define ME4000_AI_SAMPLE_COUNTER_REG 0xC0 // _/W
/*=============================================================================
Value to adjust Demux
===========================================================================*/
#define ME4000_AO_DEMUX_ADJUST_VALUE 0x4C
/*=============================================================================
Counter base register offsets
===========================================================================*/
#define ME4000_CNT_COUNTER_0_REG 0x00
#define ME4000_CNT_COUNTER_1_REG 0x01
#define ME4000_CNT_COUNTER_2_REG 0x02
#define ME4000_CNT_CTRL_REG 0x03
/*=============================================================================
PLX base register offsets
===========================================================================*/
#define PLX_INTCSR 0x4C // Interrupt control and status register
#define PLX_ICR 0x50 // Initialization control register
/*=============================================================================
Bits for the PLX_ICSR register
===========================================================================*/
#define PLX_INTCSR_LOCAL_INT1_EN 0x01 // If set, local interrupt 1 is enabled (r/w)
#define PLX_INTCSR_LOCAL_INT1_POL 0x02 // If set, local interrupt 1 polarity is active high (r/w)
#define PLX_INTCSR_LOCAL_INT1_STATE 0x04 // If set, local interrupt 1 is active (r/_)
#define PLX_INTCSR_LOCAL_INT2_EN 0x08 // If set, local interrupt 2 is enabled (r/w)
#define PLX_INTCSR_LOCAL_INT2_POL 0x10 // If set, local interrupt 2 polarity is active high (r/w)
#define PLX_INTCSR_LOCAL_INT2_STATE 0x20 // If set, local interrupt 2 is active (r/_)
#define PLX_INTCSR_PCI_INT_EN 0x40 // If set, PCI interrupt is enabled (r/w)
#define PLX_INTCSR_SOFT_INT 0x80 // If set, a software interrupt is generated (r/w)
/*=============================================================================
Bits for the PLX_ICR register
===========================================================================*/
#define PLX_ICR_BIT_EEPROM_CLOCK_SET 0x01000000
#define PLX_ICR_BIT_EEPROM_CHIP_SELECT 0x02000000
#define PLX_ICR_BIT_EEPROM_WRITE 0x04000000
#define PLX_ICR_BIT_EEPROM_READ 0x08000000
#define PLX_ICR_BIT_EEPROM_VALID 0x10000000
#define PLX_ICR_MASK_EEPROM 0x1F000000
#define EEPROM_DELAY 1
/*=============================================================================
Bits for the ME4000_AO_CTRL_REG register
===========================================================================*/
#define ME4000_AO_CTRL_BIT_MODE_0 0x001
#define ME4000_AO_CTRL_BIT_MODE_1 0x002
#define ME4000_AO_CTRL_MASK_MODE 0x003
#define ME4000_AO_CTRL_BIT_STOP 0x004
#define ME4000_AO_CTRL_BIT_ENABLE_FIFO 0x008
#define ME4000_AO_CTRL_BIT_ENABLE_EX_TRIG 0x010
#define ME4000_AO_CTRL_BIT_EX_TRIG_EDGE 0x020
#define ME4000_AO_CTRL_BIT_IMMEDIATE_STOP 0x080
#define ME4000_AO_CTRL_BIT_ENABLE_DO 0x100
#define ME4000_AO_CTRL_BIT_ENABLE_IRQ 0x200
#define ME4000_AO_CTRL_BIT_RESET_IRQ 0x400
#define ME4000_AO_CTRL_BIT_EX_TRIG_BOTH 0x800
/*=============================================================================
Bits for the ME4000_AO_STATUS_REG register
===========================================================================*/
#define ME4000_AO_STATUS_BIT_FSM 0x01
#define ME4000_AO_STATUS_BIT_FF 0x02
#define ME4000_AO_STATUS_BIT_HF 0x04
#define ME4000_AO_STATUS_BIT_EF 0x08
/*=============================================================================
Bits for the ME4000_AI_CTRL_REG register
===========================================================================*/
#define ME4000_AI_CTRL_BIT_MODE_0 0x00000001
#define ME4000_AI_CTRL_BIT_MODE_1 0x00000002
#define ME4000_AI_CTRL_BIT_MODE_2 0x00000004
#define ME4000_AI_CTRL_BIT_SAMPLE_HOLD 0x00000008
#define ME4000_AI_CTRL_BIT_IMMEDIATE_STOP 0x00000010
#define ME4000_AI_CTRL_BIT_STOP 0x00000020
#define ME4000_AI_CTRL_BIT_CHANNEL_FIFO 0x00000040
#define ME4000_AI_CTRL_BIT_DATA_FIFO 0x00000080
#define ME4000_AI_CTRL_BIT_FULLSCALE 0x00000100
#define ME4000_AI_CTRL_BIT_OFFSET 0x00000200
#define ME4000_AI_CTRL_BIT_EX_TRIG_ANALOG 0x00000400
#define ME4000_AI_CTRL_BIT_EX_TRIG 0x00000800
#define ME4000_AI_CTRL_BIT_EX_TRIG_FALLING 0x00001000
#define ME4000_AI_CTRL_BIT_EX_IRQ 0x00002000
#define ME4000_AI_CTRL_BIT_EX_IRQ_RESET 0x00004000
#define ME4000_AI_CTRL_BIT_LE_IRQ 0x00008000
#define ME4000_AI_CTRL_BIT_LE_IRQ_RESET 0x00010000
#define ME4000_AI_CTRL_BIT_HF_IRQ 0x00020000
#define ME4000_AI_CTRL_BIT_HF_IRQ_RESET 0x00040000
#define ME4000_AI_CTRL_BIT_SC_IRQ 0x00080000
#define ME4000_AI_CTRL_BIT_SC_IRQ_RESET 0x00100000
#define ME4000_AI_CTRL_BIT_SC_RELOAD 0x00200000
#define ME4000_AI_CTRL_BIT_EX_TRIG_BOTH 0x80000000
/*=============================================================================
Bits for the ME4000_AI_STATUS_REG register
===========================================================================*/
#define ME4000_AI_STATUS_BIT_EF_CHANNEL 0x00400000
#define ME4000_AI_STATUS_BIT_HF_CHANNEL 0x00800000
#define ME4000_AI_STATUS_BIT_FF_CHANNEL 0x01000000
#define ME4000_AI_STATUS_BIT_EF_DATA 0x02000000
#define ME4000_AI_STATUS_BIT_HF_DATA 0x04000000
#define ME4000_AI_STATUS_BIT_FF_DATA 0x08000000
#define ME4000_AI_STATUS_BIT_LE 0x10000000
#define ME4000_AI_STATUS_BIT_FSM 0x20000000
/*=============================================================================
Bits for the ME4000_IRQ_STATUS_REG register
===========================================================================*/
#define ME4000_IRQ_STATUS_BIT_EX 0x01
#define ME4000_IRQ_STATUS_BIT_LE 0x02
#define ME4000_IRQ_STATUS_BIT_AI_HF 0x04
#define ME4000_IRQ_STATUS_BIT_AO_0_HF 0x08
#define ME4000_IRQ_STATUS_BIT_AO_1_HF 0x10
#define ME4000_IRQ_STATUS_BIT_AO_2_HF 0x20
#define ME4000_IRQ_STATUS_BIT_AO_3_HF 0x40
#define ME4000_IRQ_STATUS_BIT_SC 0x80
/*=============================================================================
Bits for the ME4000_DIO_CTRL_REG register
===========================================================================*/
#define ME4000_DIO_CTRL_BIT_MODE_0 0X0001
#define ME4000_DIO_CTRL_BIT_MODE_1 0X0002
#define ME4000_DIO_CTRL_BIT_MODE_2 0X0004
#define ME4000_DIO_CTRL_BIT_MODE_3 0X0008
#define ME4000_DIO_CTRL_BIT_MODE_4 0X0010
#define ME4000_DIO_CTRL_BIT_MODE_5 0X0020
#define ME4000_DIO_CTRL_BIT_MODE_6 0X0040
#define ME4000_DIO_CTRL_BIT_MODE_7 0X0080
#define ME4000_DIO_CTRL_BIT_FUNCTION_0 0X0100
#define ME4000_DIO_CTRL_BIT_FUNCTION_1 0X0200
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_0 0X0400
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_1 0X0800
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_2 0X1000
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_3 0X2000
/*=============================================================================
Bits for the ME4000_CNT_CTRL_REG register
===========================================================================*/
#define ME4000_CNT_CTRL_BIT_COUNTER_0 0x00
#define ME4000_CNT_CTRL_BIT_COUNTER_1 0x40
#define ME4000_CNT_CTRL_BIT_COUNTER_2 0x80
#define ME4000_CNT_CTRL_BIT_MODE_0 0x00 // Change state if zero crossing
#define ME4000_CNT_CTRL_BIT_MODE_1 0x02 // Retriggerable One-Shot
#define ME4000_CNT_CTRL_BIT_MODE_2 0x04 // Asymmetrical divider
#define ME4000_CNT_CTRL_BIT_MODE_3 0x06 // Symmetrical divider
#define ME4000_CNT_CTRL_BIT_MODE_4 0x08 // Counter start by software trigger
#define ME4000_CNT_CTRL_BIT_MODE_5 0x0A // Counter start by hardware trigger
/*=============================================================================
Extract information from minor device number
===========================================================================*/
#define AO_BOARD(dev) ((MINOR(dev) >> 6) & 0x3)
#define AO_PORT(dev) ((MINOR(dev) >> 2) & 0xF)
#define AO_MODE(dev) (MINOR(dev) & 0x3)
#define AI_BOARD(dev) ((MINOR(dev) >> 3) & 0x1F)
#define AI_MODE(dev) (MINOR(dev) & 0x7)
#define DIO_BOARD(dev) (MINOR(dev))
#define CNT_BOARD(dev) (MINOR(dev))
#define EXT_INT_BOARD(dev) (MINOR(dev))
/*=============================================================================
Circular buffer used for analog input/output reads/writes.
===========================================================================*/
typedef struct me4000_circ_buf {
s16 *buf;
int volatile head;
int volatile tail;
} me4000_circ_buf_t;
/*=============================================================================
Information about the hardware capabilities
===========================================================================*/
typedef struct me4000_ao_info {
int count;
int fifo_count;
} me4000_ao_info_t;
typedef struct me4000_ai_info {
int count;
int sh_count;
int diff_count;
int ex_trig_analog;
} me4000_ai_info_t;
typedef struct me4000_dio_info {
int count;
} me4000_dio_info_t;
typedef struct me4000_cnt_info {
int count;
} me4000_cnt_info_t;
typedef struct me4000_board {
u16 vendor_id;
u16 device_id;
me4000_ao_info_t ao;
me4000_ai_info_t ai;
me4000_dio_info_t dio;
me4000_cnt_info_t cnt;
} me4000_board_t;
static me4000_board_t me4000_boards[] = {
{PCI_VENDOR_ID_MEILHAUS, 0x4610, {0, 0}, {16, 0, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}},
{PCI_VENDOR_ID_MEILHAUS, 0x4660, {2, 0}, {16, 0, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4661, {2, 0}, {16, 0, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4662, {2, 0}, {16, 8, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4663, {2, 0}, {16, 8, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4670, {4, 0}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4671, {4, 0}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4672, {4, 0}, {32, 8, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4673, {4, 0}, {32, 8, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4680, {4, 4}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4681, {4, 4}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4682, {4, 4}, {32, 8, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4683, {4, 4}, {32, 8, 16, 1}, {4}, {3}},
{0},
};
#define ME4000_BOARD_VERSIONS (sizeof(me4000_boards) / sizeof(me4000_board_t) - 1)
/*=============================================================================
PCI device table.
This is used by modprobe to translate PCI IDs to drivers.
===========================================================================*/
static struct pci_device_id me4000_pci_table[] __devinitdata = {
{PCI_VENDOR_ID_MEILHAUS, 0x4610, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4661, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4662, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4670, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0}
};
MODULE_DEVICE_TABLE(pci, me4000_pci_table);
/*=============================================================================
Global board and subdevice information structures
===========================================================================*/
typedef struct me4000_info {
struct list_head list; // List of all detected boards
int board_count; // Index of the board after detection
unsigned long plx_regbase; // PLX configuration space base address
unsigned long me4000_regbase; // Base address of the ME4000
unsigned long timer_regbase; // Base address of the timer circuit
unsigned long program_regbase; // Base address to set the program pin for the xilinx
unsigned long plx_regbase_size; // PLX register set space
unsigned long me4000_regbase_size; // ME4000 register set space
unsigned long timer_regbase_size; // Timer circuit register set space
unsigned long program_regbase_size; // Size of program base address of the ME4000
unsigned int serial_no; // Serial number of the board
unsigned char hw_revision; // Hardware revision of the board
unsigned short vendor_id; // Meilhaus vendor id (0x1402)
unsigned short device_id; // Device ID
int pci_bus_no; // PCI bus number
int pci_dev_no; // PCI device number
int pci_func_no; // PCI function number
struct pci_dev *pci_dev_p; // General PCI information
me4000_board_t *board_p; // Holds the board capabilities
unsigned int irq; // IRQ assigned from the PCI BIOS
unsigned int irq_count; // Count of external interrupts
spinlock_t preload_lock; // Guards the analog output preload register
spinlock_t ai_ctrl_lock; // Guards the analog input control register
struct list_head ao_context_list; // List with analog output specific context
struct me4000_ai_context *ai_context; // Analog input specific context
struct me4000_dio_context *dio_context; // Digital I/O specific context
struct me4000_cnt_context *cnt_context; // Counter specific context
struct me4000_ext_int_context *ext_int_context; // External interrupt specific context
} me4000_info_t;
typedef struct me4000_ao_context {
struct list_head list; // linked list of me4000_ao_context_t
int index; // Index in the list
int mode; // Indicates mode (0 = single, 1 = wraparound, 2 = continous)
int dac_in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
spinlock_t int_lock; // Used when locking out interrupts
me4000_circ_buf_t circ_buf; // Circular buffer
wait_queue_head_t wait_queue; // Wait queue to sleep while blocking write
me4000_info_t *board_info;
unsigned int irq; // The irq associated with this ADC
int volatile pipe_flag; // Indicates broken pipe set from me4000_ao_isr()
unsigned long ctrl_reg;
unsigned long status_reg;
unsigned long fifo_reg;
unsigned long single_reg;
unsigned long timer_reg;
unsigned long irq_status_reg;
unsigned long preload_reg;
struct fasync_struct *fasync_p; // Queue for asynchronous notification
} me4000_ao_context_t;
typedef struct me4000_ai_context {
struct list_head list; // linked list of me4000_ai_info_t
int mode; // Indicates mode
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
spinlock_t int_lock; // Used when locking out interrupts
int number; // Number of the DAC
unsigned int irq; // The irq associated with this ADC
me4000_circ_buf_t circ_buf; // Circular buffer
wait_queue_head_t wait_queue; // Wait queue to sleep while blocking read
me4000_info_t *board_info;
struct fasync_struct *fasync_p; // Queue for asynchronous notification
unsigned long ctrl_reg;
unsigned long status_reg;
unsigned long channel_list_reg;
unsigned long data_reg;
unsigned long chan_timer_reg;
unsigned long chan_pre_timer_reg;
unsigned long scan_timer_low_reg;
unsigned long scan_timer_high_reg;
unsigned long scan_pre_timer_low_reg;
unsigned long scan_pre_timer_high_reg;
unsigned long start_reg;
unsigned long irq_status_reg;
unsigned long sample_counter_reg;
unsigned long chan_timer;
unsigned long chan_pre_timer;
unsigned long scan_timer_low;
unsigned long scan_timer_high;
unsigned long channel_list_count;
unsigned long sample_counter;
int sample_counter_reload;
} me4000_ai_context_t;
typedef struct me4000_dio_context {
struct list_head list; // linked list of me4000_dio_context_t
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
int number;
int dio_count;
me4000_info_t *board_info;
unsigned long dir_reg;
unsigned long ctrl_reg;
unsigned long port_0_reg;
unsigned long port_1_reg;
unsigned long port_2_reg;
unsigned long port_3_reg;
} me4000_dio_context_t;
typedef struct me4000_cnt_context {
struct list_head list; // linked list of me4000_dio_context_t
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
int number;
int cnt_count;
me4000_info_t *board_info;
unsigned long ctrl_reg;
unsigned long counter_0_reg;
unsigned long counter_1_reg;
unsigned long counter_2_reg;
} me4000_cnt_context_t;
typedef struct me4000_ext_int_context {
struct list_head list; // linked list of me4000_dio_context_t
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
int number;
me4000_info_t *board_info;
unsigned int irq;
unsigned long int_count;
struct fasync_struct *fasync_ptr;
unsigned long ctrl_reg;
unsigned long irq_status_reg;
} me4000_ext_int_context_t;
#endif
/*=============================================================================
Application include section starts here
===========================================================================*/
/*-----------------------------------------------------------------------------
Defines for analog input
----------------------------------------------------------------------------*/
/* General stuff */
#define ME4000_AI_FIFO_COUNT 2048
#define ME4000_AI_MIN_TICKS 66
#define ME4000_AI_MAX_SCAN_TICKS 0xFFFFFFFFFFLL
#define ME4000_AI_BUFFER_SIZE (32 * 1024) // Size in bytes
#define ME4000_AI_BUFFER_COUNT ((ME4000_AI_BUFFER_SIZE) / 2) // Size in values
/* Channel list defines and masks */
#define ME4000_AI_CHANNEL_LIST_COUNT 1024
#define ME4000_AI_LIST_INPUT_SINGLE_ENDED 0x000
#define ME4000_AI_LIST_INPUT_DIFFERENTIAL 0x020
#define ME4000_AI_LIST_RANGE_BIPOLAR_10 0x000
#define ME4000_AI_LIST_RANGE_BIPOLAR_2_5 0x040
#define ME4000_AI_LIST_RANGE_UNIPOLAR_10 0x080
#define ME4000_AI_LIST_RANGE_UNIPOLAR_2_5 0x0C0
#define ME4000_AI_LIST_LAST_ENTRY 0x100
/* External trigger defines */
#define ME4000_AI_TRIGGER_SOFTWARE 0x0 // Use only with API
#define ME4000_AI_TRIGGER_EXT_DIGITAL 0x1
#define ME4000_AI_TRIGGER_EXT_ANALOG 0x2
#define ME4000_AI_TRIGGER_EXT_EDGE_RISING 0x0
#define ME4000_AI_TRIGGER_EXT_EDGE_FALLING 0x1
#define ME4000_AI_TRIGGER_EXT_EDGE_BOTH 0x2
/* Sample and Hold */
#define ME4000_AI_SIMULTANEOUS_DISABLE 0x0
#define ME4000_AI_SIMULTANEOUS_ENABLE 0x1
/* Defines for the Sample Counter */
#define ME4000_AI_SC_RELOAD 0x0
#define ME4000_AI_SC_ONCE 0x1
/* Modes for analog input */
#define ME4000_AI_ACQ_MODE_SINGLE 0x00 // Catch one single value
#define ME4000_AI_ACQ_MODE_SOFTWARE 0x01 // Continous sampling with software start
#define ME4000_AI_ACQ_MODE_EXT 0x02 // Continous sampling with external trigger start
#define ME4000_AI_ACQ_MODE_EXT_SINGLE_VALUE 0x03 // Sample one value by external trigger
#define ME4000_AI_ACQ_MODE_EXT_SINGLE_CHANLIST 0x04 // Sample one channel list by external trigger
/* Staus of AI FSM */
#define ME4000_AI_STATUS_IDLE 0x0
#define ME4000_AI_STATUS_BUSY 0x1
/* Voltages for calibration */
#define ME4000_AI_GAIN_1_UNI_OFFSET 10.0E-3
#define ME4000_AI_GAIN_1_UNI_FULLSCALE 9950.0E-3
#define ME4000_AI_GAIN_1_BI_OFFSET 0.0
#define ME4000_AI_GAIN_1_BI_FULLSCALE 9950.0E-3
#define ME4000_AI_GAIN_4_UNI_OFFSET 10.0E-3
#define ME4000_AI_GAIN_4_UNI_FULLSCALE 2450.0E-3
#define ME4000_AI_GAIN_4_BI_OFFSET 0.0
#define ME4000_AI_GAIN_4_BI_FULLSCALE 2450.0E-3
/* Ideal digits for calibration */
#define ME4000_AI_GAIN_1_UNI_OFFSET_DIGITS (-32702)
#define ME4000_AI_GAIN_1_UNI_FULLSCALE_DIGITS 32440
#define ME4000_AI_GAIN_1_BI_OFFSET_DIGITS 0
#define ME4000_AI_GAIN_1_BI_FULLSCALE_DIGITS 32604
#define ME4000_AI_GAIN_4_UNI_OFFSET_DIGITS (-32505)
#define ME4000_AI_GAIN_4_UNI_FULLSCALE_DIGITS 31457
#define ME4000_AI_GAIN_4_BI_OFFSET_DIGITS 0
#define ME4000_AI_GAIN_4_BI_FULLSCALE_DIGITS 32113
/*-----------------------------------------------------------------------------
Defines for analog output
----------------------------------------------------------------------------*/
/* General stuff */
#define ME4000_AO_FIFO_COUNT (4 * 1024)
#define ME4000_AO_MIN_TICKS 66
#define ME4000_AO_BUFFER_SIZE (32 * 1024) // Size in bytes
#define ME4000_AO_BUFFER_COUNT ((ME4000_AO_BUFFER_SIZE) / 2) // Size in values
/* Conversion modes for analog output */
#define ME4000_AO_CONV_MODE_SINGLE 0x0
#define ME4000_AO_CONV_MODE_WRAPAROUND 0x1
#define ME4000_AO_CONV_MODE_CONTINUOUS 0x2
/* Trigger setup */
#define ME4000_AO_TRIGGER_EXT_EDGE_RISING 0x0
#define ME4000_AO_TRIGGER_EXT_EDGE_FALLING 0x1
#define ME4000_AO_TRIGGER_EXT_EDGE_BOTH 0x2
/* Status of AO FSM */
#define ME4000_AO_STATUS_IDLE 0x0
#define ME4000_AO_STATUS_BUSY 0x1
/*-----------------------------------------------------------------------------
Defines for eeprom
----------------------------------------------------------------------------*/
#define ME4000_EEPROM_CMD_READ 0x180
#define ME4000_EEPROM_CMD_WRITE_ENABLE 0x130
#define ME4000_EEPROM_CMD_WRITE_DISABLE 0x100
#define ME4000_EEPROM_CMD_WRITE 0x1400000
#define ME4000_EEPROM_CMD_LENGTH_READ 9
#define ME4000_EEPROM_CMD_LENGTH_WRITE_ENABLE 9
#define ME4000_EEPROM_CMD_LENGTH_WRITE_DISABLE 9
#define ME4000_EEPROM_CMD_LENGTH_WRITE 25
#define ME4000_EEPROM_ADR_DATE_HIGH 0x32
#define ME4000_EEPROM_ADR_DATE_LOW 0x33
#define ME4000_EEPROM_ADR_GAIN_1_UNI_OFFSET 0x34
#define ME4000_EEPROM_ADR_GAIN_1_UNI_FULLSCALE 0x35
#define ME4000_EEPROM_ADR_GAIN_1_BI_OFFSET 0x36
#define ME4000_EEPROM_ADR_GAIN_1_BI_FULLSCALE 0x37
#define ME4000_EEPROM_ADR_GAIN_1_DIFF_OFFSET 0x38
#define ME4000_EEPROM_ADR_GAIN_1_DIFF_FULLSCALE 0x39
#define ME4000_EEPROM_ADR_GAIN_4_UNI_OFFSET 0x3A
#define ME4000_EEPROM_ADR_GAIN_4_UNI_FULLSCALE 0x3B
#define ME4000_EEPROM_ADR_GAIN_4_BI_OFFSET 0x3C
#define ME4000_EEPROM_ADR_GAIN_4_BI_FULLSCALE 0x3D
#define ME4000_EEPROM_ADR_GAIN_4_DIFF_OFFSET 0x3E
#define ME4000_EEPROM_ADR_GAIN_4_DIFF_FULLSCALE 0x3F
#define ME4000_EEPROM_ADR_LENGTH 6
#define ME4000_EEPROM_DATA_LENGTH 16
/*-----------------------------------------------------------------------------
Defines for digital I/O
----------------------------------------------------------------------------*/
#define ME4000_DIO_PORT_A 0x0
#define ME4000_DIO_PORT_B 0x1
#define ME4000_DIO_PORT_C 0x2
#define ME4000_DIO_PORT_D 0x3
#define ME4000_DIO_PORT_INPUT 0x0
#define ME4000_DIO_PORT_OUTPUT 0x1
#define ME4000_DIO_FIFO_LOW 0x2
#define ME4000_DIO_FIFO_HIGH 0x3
#define ME4000_DIO_FUNCTION_PATTERN 0x0
#define ME4000_DIO_FUNCTION_DEMUX 0x1
#define ME4000_DIO_FUNCTION_MUX 0x2
/*-----------------------------------------------------------------------------
Defines for counters
----------------------------------------------------------------------------*/
#define ME4000_CNT_COUNTER_0 0
#define ME4000_CNT_COUNTER_1 1
#define ME4000_CNT_COUNTER_2 2
#define ME4000_CNT_MODE_0 0 // Change state if zero crossing
#define ME4000_CNT_MODE_1 1 // Retriggerable One-Shot
#define ME4000_CNT_MODE_2 2 // Asymmetrical divider
#define ME4000_CNT_MODE_3 3 // Symmetrical divider
#define ME4000_CNT_MODE_4 4 // Counter start by software trigger
#define ME4000_CNT_MODE_5 5 // Counter start by hardware trigger
/*-----------------------------------------------------------------------------
General type definitions
----------------------------------------------------------------------------*/
typedef struct me4000_user_info {
int board_count; // Index of the board after detection
unsigned long plx_regbase; // PLX configuration space base address
unsigned long me4000_regbase; // Base address of the ME4000
unsigned long plx_regbase_size; // PLX register set space
unsigned long me4000_regbase_size; // ME4000 register set space
unsigned long serial_no; // Serial number of the board
unsigned char hw_revision; // Hardware revision of the board
unsigned short vendor_id; // Meilhaus vendor id (0x1402)
unsigned short device_id; // Device ID
int pci_bus_no; // PCI bus number
int pci_dev_no; // PCI device number
int pci_func_no; // PCI function number
char irq; // IRQ assigned from the PCI BIOS
int irq_count; // Count of external interrupts
int driver_version; // Version of the driver release
int ao_count; // Count of analog output channels
int ao_fifo_count; // Count fo analog output fifos
int ai_count; // Count of analog input channels
int ai_sh_count; // Count of sample and hold devices
int ai_ex_trig_analog; // Flag to indicate if analogous external trigger is available
int dio_count; // Count of digital I/O ports
int cnt_count; // Count of counters
} me4000_user_info_t;
/*-----------------------------------------------------------------------------
Type definitions for analog output
----------------------------------------------------------------------------*/
typedef struct me4000_ao_channel_list {
unsigned long count;
unsigned long *list;
} me4000_ao_channel_list_t;
/*-----------------------------------------------------------------------------
Type definitions for analog input
----------------------------------------------------------------------------*/
typedef struct me4000_ai_channel_list {
unsigned long count;
unsigned long *list;
} me4000_ai_channel_list_t;
typedef struct me4000_ai_timer {
unsigned long pre_chan;
unsigned long chan;
unsigned long scan_low;
unsigned long scan_high;
} me4000_ai_timer_t;
typedef struct me4000_ai_config {
me4000_ai_timer_t timer;
me4000_ai_channel_list_t channel_list;
int sh;
} me4000_ai_config_t;
typedef struct me4000_ai_single {
int channel;
int range;
int mode;
short value;
unsigned long timeout;
} me4000_ai_single_t;
typedef struct me4000_ai_trigger {
int mode;
int edge;
} me4000_ai_trigger_t;
typedef struct me4000_ai_sc {
unsigned long value;
int reload;
} me4000_ai_sc_t;
/*-----------------------------------------------------------------------------
Type definitions for eeprom
----------------------------------------------------------------------------*/
typedef struct me4000_eeprom {
unsigned long date;
short uni_10_offset;
short uni_10_fullscale;
short uni_2_5_offset;
short uni_2_5_fullscale;
short bi_10_offset;
short bi_10_fullscale;
short bi_2_5_offset;
short bi_2_5_fullscale;
short diff_10_offset;
short diff_10_fullscale;
short diff_2_5_offset;
short diff_2_5_fullscale;
} me4000_eeprom_t;
/*-----------------------------------------------------------------------------
Type definitions for digital I/O
----------------------------------------------------------------------------*/
typedef struct me4000_dio_config {
int port;
int mode;
int function;
} me4000_dio_config_t;
typedef struct me4000_dio_byte {
int port;
unsigned char byte;
} me4000_dio_byte_t;
/*-----------------------------------------------------------------------------
Type definitions for counters
----------------------------------------------------------------------------*/
typedef struct me4000_cnt {
int counter;
unsigned short value;
} me4000_cnt_t;
typedef struct me4000_cnt_config {
int counter;
int mode;
} me4000_cnt_config_t;
/*-----------------------------------------------------------------------------
Type definitions for external interrupt
----------------------------------------------------------------------------*/
typedef struct {
int int1_count;
int int2_count;
} me4000_int_type;
/*-----------------------------------------------------------------------------
The ioctls of the board
----------------------------------------------------------------------------*/
#define ME4000_IOCTL_MAXNR 50
#define ME4000_MAGIC 'y'
#define ME4000_GET_USER_INFO _IOR (ME4000_MAGIC, 0, me4000_user_info_t)
#define ME4000_AO_START _IOW (ME4000_MAGIC, 1, unsigned long)
#define ME4000_AO_STOP _IO (ME4000_MAGIC, 2)
#define ME4000_AO_IMMEDIATE_STOP _IO (ME4000_MAGIC, 3)
#define ME4000_AO_RESET _IO (ME4000_MAGIC, 4)
#define ME4000_AO_PRELOAD _IO (ME4000_MAGIC, 5)
#define ME4000_AO_PRELOAD_UPDATE _IO (ME4000_MAGIC, 6)
#define ME4000_AO_EX_TRIG_ENABLE _IO (ME4000_MAGIC, 7)
#define ME4000_AO_EX_TRIG_DISABLE _IO (ME4000_MAGIC, 8)
#define ME4000_AO_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 9, int)
#define ME4000_AO_TIMER_SET_DIVISOR _IOW (ME4000_MAGIC, 10, unsigned long)
#define ME4000_AO_ENABLE_DO _IO (ME4000_MAGIC, 11)
#define ME4000_AO_DISABLE_DO _IO (ME4000_MAGIC, 12)
#define ME4000_AO_FSM_STATE _IOR (ME4000_MAGIC, 13, int)
#define ME4000_AI_SINGLE _IOR (ME4000_MAGIC, 14, me4000_ai_single_t)
#define ME4000_AI_START _IOW (ME4000_MAGIC, 15, unsigned long)
#define ME4000_AI_STOP _IO (ME4000_MAGIC, 16)
#define ME4000_AI_IMMEDIATE_STOP _IO (ME4000_MAGIC, 17)
#define ME4000_AI_EX_TRIG_ENABLE _IO (ME4000_MAGIC, 18)
#define ME4000_AI_EX_TRIG_DISABLE _IO (ME4000_MAGIC, 19)
#define ME4000_AI_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 20, me4000_ai_trigger_t)
#define ME4000_AI_CONFIG _IOW (ME4000_MAGIC, 21, me4000_ai_config_t)
#define ME4000_AI_SC_SETUP _IOW (ME4000_MAGIC, 22, me4000_ai_sc_t)
#define ME4000_AI_FSM_STATE _IOR (ME4000_MAGIC, 23, int)
#define ME4000_DIO_CONFIG _IOW (ME4000_MAGIC, 24, me4000_dio_config_t)
#define ME4000_DIO_GET_BYTE _IOR (ME4000_MAGIC, 25, me4000_dio_byte_t)
#define ME4000_DIO_SET_BYTE _IOW (ME4000_MAGIC, 26, me4000_dio_byte_t)
#define ME4000_DIO_RESET _IO (ME4000_MAGIC, 27)
#define ME4000_CNT_READ _IOR (ME4000_MAGIC, 28, me4000_cnt_t)
#define ME4000_CNT_WRITE _IOW (ME4000_MAGIC, 29, me4000_cnt_t)
#define ME4000_CNT_CONFIG _IOW (ME4000_MAGIC, 30, me4000_cnt_config_t)
#define ME4000_CNT_RESET _IO (ME4000_MAGIC, 31)
#define ME4000_EXT_INT_DISABLE _IO (ME4000_MAGIC, 32)
#define ME4000_EXT_INT_ENABLE _IO (ME4000_MAGIC, 33)
#define ME4000_EXT_INT_COUNT _IOR (ME4000_MAGIC, 34, int)
#define ME4000_AI_OFFSET_ENABLE _IO (ME4000_MAGIC, 35)
#define ME4000_AI_OFFSET_DISABLE _IO (ME4000_MAGIC, 36)
#define ME4000_AI_FULLSCALE_ENABLE _IO (ME4000_MAGIC, 37)
#define ME4000_AI_FULLSCALE_DISABLE _IO (ME4000_MAGIC, 38)
#define ME4000_AI_EEPROM_READ _IOR (ME4000_MAGIC, 39, me4000_eeprom_t)
#define ME4000_AI_EEPROM_WRITE _IOW (ME4000_MAGIC, 40, me4000_eeprom_t)
#define ME4000_AO_SIMULTANEOUS_EX_TRIG _IO (ME4000_MAGIC, 41)
#define ME4000_AO_SIMULTANEOUS_SW _IO (ME4000_MAGIC, 42)
#define ME4000_AO_SIMULTANEOUS_DISABLE _IO (ME4000_MAGIC, 43)
#define ME4000_AO_SIMULTANEOUS_UPDATE _IOW (ME4000_MAGIC, 44, me4000_ao_channel_list_t)
#define ME4000_AO_SYNCHRONOUS_EX_TRIG _IO (ME4000_MAGIC, 45)
#define ME4000_AO_SYNCHRONOUS_SW _IO (ME4000_MAGIC, 46)
#define ME4000_AO_SYNCHRONOUS_DISABLE _IO (ME4000_MAGIC, 47)
#define ME4000_AO_EX_TRIG_TIMEOUT _IOW (ME4000_MAGIC, 48, unsigned long)
#define ME4000_AO_GET_FREE_BUFFER _IOR (ME4000_MAGIC, 49, unsigned long)
#define ME4000_AI_GET_COUNT_BUFFER _IOR (ME4000_MAGIC, 50, unsigned long)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment