Commit c0f7ac3a authored by Masami Hiramatsu's avatar Masami Hiramatsu Committed by Ingo Molnar

kprobes/x86: Support kprobes jump optimization on x86

Introduce x86 arch-specific optimization code, which supports
both of x86-32 and x86-64.

This code also supports safety checking, which decodes whole of
a function in which probe is inserted, and checks following
conditions before optimization:
 - The optimized instructions which will be replaced by a jump instruction
   don't straddle the function boundary.
 - There is no indirect jump instruction, because it will jumps into
   the address range which is replaced by jump operand.
 - There is no jump/loop instruction which jumps into the address range
   which is replaced by jump operand.
 - Don't optimize kprobes if it is in functions into which fixup code will
   jumps.

This uses text_poke_multibyte() which doesn't support modifying
code on NMI/MCE handler. However, since kprobes itself doesn't
support NMI/MCE code probing, it's not a problem.

Changes in v9:
 - Use *_text_reserved() for checking the probe can be optimized.
 - Verify jump address range is in 2G range when preparing slot.
 - Backup original code when switching optimized buffer, instead of
   preparing buffer, because there can be int3 of other probes in
   preparing phase.
 - Check kprobe is disabled in arch_check_optimized_kprobe().
 - Strictly check indirect jump opcodes (ff /4, ff /5).

Changes in v6:
 - Split stop_machine-based jump patching code.
 - Update comments and coding style.

Changes in v5:
 - Introduce stop_machine-based jump replacing.
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parent 3d55cc8a
...@@ -31,6 +31,7 @@ config X86 ...@@ -31,6 +31,7 @@ config X86
select ARCH_WANT_FRAME_POINTERS select ARCH_WANT_FRAME_POINTERS
select HAVE_DMA_ATTRS select HAVE_DMA_ATTRS
select HAVE_KRETPROBES select HAVE_KRETPROBES
select HAVE_OPTPROBES
select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACER
......
...@@ -33,6 +33,9 @@ struct kprobe; ...@@ -33,6 +33,9 @@ struct kprobe;
typedef u8 kprobe_opcode_t; typedef u8 kprobe_opcode_t;
#define BREAKPOINT_INSTRUCTION 0xcc #define BREAKPOINT_INSTRUCTION 0xcc
#define RELATIVEJUMP_OPCODE 0xe9 #define RELATIVEJUMP_OPCODE 0xe9
#define RELATIVEJUMP_SIZE 5
#define RELATIVECALL_OPCODE 0xe8
#define RELATIVE_ADDR_SIZE 4
#define MAX_INSN_SIZE 16 #define MAX_INSN_SIZE 16
#define MAX_STACK_SIZE 64 #define MAX_STACK_SIZE 64
#define MIN_STACK_SIZE(ADDR) \ #define MIN_STACK_SIZE(ADDR) \
...@@ -44,6 +47,17 @@ typedef u8 kprobe_opcode_t; ...@@ -44,6 +47,17 @@ typedef u8 kprobe_opcode_t;
#define flush_insn_slot(p) do { } while (0) #define flush_insn_slot(p) do { } while (0)
/* optinsn template addresses */
extern kprobe_opcode_t optprobe_template_entry;
extern kprobe_opcode_t optprobe_template_val;
extern kprobe_opcode_t optprobe_template_call;
extern kprobe_opcode_t optprobe_template_end;
#define MAX_OPTIMIZED_LENGTH (MAX_INSN_SIZE + RELATIVE_ADDR_SIZE)
#define MAX_OPTINSN_SIZE \
(((unsigned long)&optprobe_template_end - \
(unsigned long)&optprobe_template_entry) + \
MAX_OPTIMIZED_LENGTH + RELATIVEJUMP_SIZE)
extern const int kretprobe_blacklist_size; extern const int kretprobe_blacklist_size;
void arch_remove_kprobe(struct kprobe *p); void arch_remove_kprobe(struct kprobe *p);
...@@ -64,6 +78,21 @@ struct arch_specific_insn { ...@@ -64,6 +78,21 @@ struct arch_specific_insn {
int boostable; int boostable;
}; };
struct arch_optimized_insn {
/* copy of the original instructions */
kprobe_opcode_t copied_insn[RELATIVE_ADDR_SIZE];
/* detour code buffer */
kprobe_opcode_t *insn;
/* the size of instructions copied to detour code buffer */
size_t size;
};
/* Return true (!0) if optinsn is prepared for optimization. */
static inline int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
{
return optinsn->size;
}
struct prev_kprobe { struct prev_kprobe {
struct kprobe *kp; struct kprobe *kp;
unsigned long status; unsigned long status;
......
...@@ -49,6 +49,7 @@ ...@@ -49,6 +49,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/kdebug.h> #include <linux/kdebug.h>
#include <linux/kallsyms.h> #include <linux/kallsyms.h>
#include <linux/ftrace.h>
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/desc.h> #include <asm/desc.h>
...@@ -106,16 +107,22 @@ struct kretprobe_blackpoint kretprobe_blacklist[] = { ...@@ -106,16 +107,22 @@ struct kretprobe_blackpoint kretprobe_blacklist[] = {
}; };
const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist); const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/ static void __kprobes __synthesize_relative_insn(void *from, void *to, u8 op)
static void __kprobes set_jmp_op(void *from, void *to)
{ {
struct __arch_jmp_op { struct __arch_relative_insn {
char op; u8 op;
s32 raddr; s32 raddr;
} __attribute__((packed)) * jop; } __attribute__((packed)) *insn;
jop = (struct __arch_jmp_op *)from;
jop->raddr = (s32)((long)(to) - ((long)(from) + 5)); insn = (struct __arch_relative_insn *)from;
jop->op = RELATIVEJUMP_OPCODE; insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
insn->op = op;
}
/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/
static void __kprobes synthesize_reljump(void *from, void *to)
{
__synthesize_relative_insn(from, to, RELATIVEJUMP_OPCODE);
} }
/* /*
...@@ -202,7 +209,7 @@ static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr) ...@@ -202,7 +209,7 @@ static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
/* /*
* Basically, kp->ainsn.insn has an original instruction. * Basically, kp->ainsn.insn has an original instruction.
* However, RIP-relative instruction can not do single-stepping * However, RIP-relative instruction can not do single-stepping
* at different place, fix_riprel() tweaks the displacement of * at different place, __copy_instruction() tweaks the displacement of
* that instruction. In that case, we can't recover the instruction * that instruction. In that case, we can't recover the instruction
* from the kp->ainsn.insn. * from the kp->ainsn.insn.
* *
...@@ -284,21 +291,37 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn) ...@@ -284,21 +291,37 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
} }
/* /*
* Adjust the displacement if the instruction uses the %rip-relative * Copy an instruction and adjust the displacement if the instruction
* addressing mode. * uses the %rip-relative addressing mode.
* If it does, Return the address of the 32-bit displacement word. * If it does, Return the address of the 32-bit displacement word.
* If not, return null. * If not, return null.
* Only applicable to 64-bit x86. * Only applicable to 64-bit x86.
*/ */
static void __kprobes fix_riprel(struct kprobe *p) static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
{ {
#ifdef CONFIG_X86_64
struct insn insn; struct insn insn;
kernel_insn_init(&insn, p->ainsn.insn); int ret;
kprobe_opcode_t buf[MAX_INSN_SIZE];
kernel_insn_init(&insn, src);
if (recover) {
insn_get_opcode(&insn);
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
ret = recover_probed_instruction(buf,
(unsigned long)src);
if (ret)
return 0;
kernel_insn_init(&insn, buf);
}
}
insn_get_length(&insn);
memcpy(dest, insn.kaddr, insn.length);
#ifdef CONFIG_X86_64
if (insn_rip_relative(&insn)) { if (insn_rip_relative(&insn)) {
s64 newdisp; s64 newdisp;
u8 *disp; u8 *disp;
kernel_insn_init(&insn, dest);
insn_get_displacement(&insn); insn_get_displacement(&insn);
/* /*
* The copied instruction uses the %rip-relative addressing * The copied instruction uses the %rip-relative addressing
...@@ -312,20 +335,23 @@ static void __kprobes fix_riprel(struct kprobe *p) ...@@ -312,20 +335,23 @@ static void __kprobes fix_riprel(struct kprobe *p)
* extension of the original signed 32-bit displacement would * extension of the original signed 32-bit displacement would
* have given. * have given.
*/ */
newdisp = (u8 *) p->addr + (s64) insn.displacement.value - newdisp = (u8 *) src + (s64) insn.displacement.value -
(u8 *) p->ainsn.insn; (u8 *) dest;
BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */ BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */
disp = (u8 *) p->ainsn.insn + insn_offset_displacement(&insn); disp = (u8 *) dest + insn_offset_displacement(&insn);
*(s32 *) disp = (s32) newdisp; *(s32 *) disp = (s32) newdisp;
} }
#endif #endif
return insn.length;
} }
static void __kprobes arch_copy_kprobe(struct kprobe *p) static void __kprobes arch_copy_kprobe(struct kprobe *p)
{ {
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); /*
* Copy an instruction without recovering int3, because it will be
fix_riprel(p); * put by another subsystem.
*/
__copy_instruction(p->ainsn.insn, p->addr, 0);
if (can_boost(p->addr)) if (can_boost(p->addr))
p->ainsn.boostable = 0; p->ainsn.boostable = 0;
...@@ -417,9 +443,20 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, ...@@ -417,9 +443,20 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
*sara = (unsigned long) &kretprobe_trampoline; *sara = (unsigned long) &kretprobe_trampoline;
} }
#ifdef CONFIG_OPTPROBES
static int __kprobes setup_detour_execution(struct kprobe *p,
struct pt_regs *regs,
int reenter);
#else
#define setup_detour_execution(p, regs, reenter) (0)
#endif
static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs, static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb, int reenter) struct kprobe_ctlblk *kcb, int reenter)
{ {
if (setup_detour_execution(p, regs, reenter))
return;
#if !defined(CONFIG_PREEMPT) #if !defined(CONFIG_PREEMPT)
if (p->ainsn.boostable == 1 && !p->post_handler) { if (p->ainsn.boostable == 1 && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */ /* Boost up -- we can execute copied instructions directly */
...@@ -815,8 +852,8 @@ static void __kprobes resume_execution(struct kprobe *p, ...@@ -815,8 +852,8 @@ static void __kprobes resume_execution(struct kprobe *p,
* These instructions can be executed directly if it * These instructions can be executed directly if it
* jumps back to correct address. * jumps back to correct address.
*/ */
set_jmp_op((void *)regs->ip, synthesize_reljump((void *)regs->ip,
(void *)orig_ip + (regs->ip - copy_ip)); (void *)orig_ip + (regs->ip - copy_ip));
p->ainsn.boostable = 1; p->ainsn.boostable = 1;
} else { } else {
p->ainsn.boostable = -1; p->ainsn.boostable = -1;
...@@ -1043,6 +1080,358 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) ...@@ -1043,6 +1080,358 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
return 0; return 0;
} }
#ifdef CONFIG_OPTPROBES
/* Insert a call instruction at address 'from', which calls address 'to'.*/
static void __kprobes synthesize_relcall(void *from, void *to)
{
__synthesize_relative_insn(from, to, RELATIVECALL_OPCODE);
}
/* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */
static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr,
unsigned long val)
{
#ifdef CONFIG_X86_64
*addr++ = 0x48;
*addr++ = 0xbf;
#else
*addr++ = 0xb8;
#endif
*(unsigned long *)addr = val;
}
void __kprobes kprobes_optinsn_template_holder(void)
{
asm volatile (
".global optprobe_template_entry\n"
"optprobe_template_entry: \n"
#ifdef CONFIG_X86_64
/* We don't bother saving the ss register */
" pushq %rsp\n"
" pushfq\n"
SAVE_REGS_STRING
" movq %rsp, %rsi\n"
".global optprobe_template_val\n"
"optprobe_template_val: \n"
ASM_NOP5
ASM_NOP5
".global optprobe_template_call\n"
"optprobe_template_call: \n"
ASM_NOP5
/* Move flags to rsp */
" movq 144(%rsp), %rdx\n"
" movq %rdx, 152(%rsp)\n"
RESTORE_REGS_STRING
/* Skip flags entry */
" addq $8, %rsp\n"
" popfq\n"
#else /* CONFIG_X86_32 */
" pushf\n"
SAVE_REGS_STRING
" movl %esp, %edx\n"
".global optprobe_template_val\n"
"optprobe_template_val: \n"
ASM_NOP5
".global optprobe_template_call\n"
"optprobe_template_call: \n"
ASM_NOP5
RESTORE_REGS_STRING
" addl $4, %esp\n" /* skip cs */
" popf\n"
#endif
".global optprobe_template_end\n"
"optprobe_template_end: \n");
}
#define TMPL_MOVE_IDX \
((long)&optprobe_template_val - (long)&optprobe_template_entry)
#define TMPL_CALL_IDX \
((long)&optprobe_template_call - (long)&optprobe_template_entry)
#define TMPL_END_IDX \
((long)&optprobe_template_end - (long)&optprobe_template_entry)
#define INT3_SIZE sizeof(kprobe_opcode_t)
/* Optimized kprobe call back function: called from optinsn */
static void __kprobes optimized_callback(struct optimized_kprobe *op,
struct pt_regs *regs)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
preempt_disable();
if (kprobe_running()) {
kprobes_inc_nmissed_count(&op->kp);
} else {
/* Save skipped registers */
#ifdef CONFIG_X86_64
regs->cs = __KERNEL_CS;
#else
regs->cs = __KERNEL_CS | get_kernel_rpl();
regs->gs = 0;
#endif
regs->ip = (unsigned long)op->kp.addr + INT3_SIZE;
regs->orig_ax = ~0UL;
__get_cpu_var(current_kprobe) = &op->kp;
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
opt_pre_handler(&op->kp, regs);
__get_cpu_var(current_kprobe) = NULL;
}
preempt_enable_no_resched();
}
static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
{
int len = 0, ret;
while (len < RELATIVEJUMP_SIZE) {
ret = __copy_instruction(dest + len, src + len, 1);
if (!ret || !can_boost(dest + len))
return -EINVAL;
len += ret;
}
/* Check whether the address range is reserved */
if (ftrace_text_reserved(src, src + len - 1) ||
alternatives_text_reserved(src, src + len - 1))
return -EBUSY;
return len;
}
/* Check whether insn is indirect jump */
static int __kprobes insn_is_indirect_jump(struct insn *insn)
{
return ((insn->opcode.bytes[0] == 0xff &&
(X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */
insn->opcode.bytes[0] == 0xea); /* Segment based jump */
}
/* Check whether insn jumps into specified address range */
static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
{
unsigned long target = 0;
switch (insn->opcode.bytes[0]) {
case 0xe0: /* loopne */
case 0xe1: /* loope */
case 0xe2: /* loop */
case 0xe3: /* jcxz */
case 0xe9: /* near relative jump */
case 0xeb: /* short relative jump */
break;
case 0x0f:
if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */
break;
return 0;
default:
if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */
break;
return 0;
}
target = (unsigned long)insn->next_byte + insn->immediate.value;
return (start <= target && target <= start + len);
}
/* Decode whole function to ensure any instructions don't jump into target */
static int __kprobes can_optimize(unsigned long paddr)
{
int ret;
unsigned long addr, size = 0, offset = 0;
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
/* Dummy buffers for lookup_symbol_attrs */
static char __dummy_buf[KSYM_NAME_LEN];
/* Lookup symbol including addr */
if (!kallsyms_lookup(paddr, &size, &offset, NULL, __dummy_buf))
return 0;
/* Check there is enough space for a relative jump. */
if (size - offset < RELATIVEJUMP_SIZE)
return 0;
/* Decode instructions */
addr = paddr - offset;
while (addr < paddr - offset + size) { /* Decode until function end */
if (search_exception_tables(addr))
/*
* Since some fixup code will jumps into this function,
* we can't optimize kprobe in this function.
*/
return 0;
kernel_insn_init(&insn, (void *)addr);
insn_get_opcode(&insn);
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
ret = recover_probed_instruction(buf, addr);
if (ret)
return 0;
kernel_insn_init(&insn, buf);
}
insn_get_length(&insn);
/* Recover address */
insn.kaddr = (void *)addr;
insn.next_byte = (void *)(addr + insn.length);
/* Check any instructions don't jump into target */
if (insn_is_indirect_jump(&insn) ||
insn_jump_into_range(&insn, paddr + INT3_SIZE,
RELATIVE_ADDR_SIZE))
return 0;
addr += insn.length;
}
return 1;
}
/* Check optimized_kprobe can actually be optimized. */
int __kprobes arch_check_optimized_kprobe(struct optimized_kprobe *op)
{
int i;
struct kprobe *p;
for (i = 1; i < op->optinsn.size; i++) {
p = get_kprobe(op->kp.addr + i);
if (p && !kprobe_disabled(p))
return -EEXIST;
}
return 0;
}
/* Check the addr is within the optimized instructions. */
int __kprobes arch_within_optimized_kprobe(struct optimized_kprobe *op,
unsigned long addr)
{
return ((unsigned long)op->kp.addr <= addr &&
(unsigned long)op->kp.addr + op->optinsn.size > addr);
}
/* Free optimized instruction slot */
static __kprobes
void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
{
if (op->optinsn.insn) {
free_optinsn_slot(op->optinsn.insn, dirty);
op->optinsn.insn = NULL;
op->optinsn.size = 0;
}
}
void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
{
__arch_remove_optimized_kprobe(op, 1);
}
/*
* Copy replacing target instructions
* Target instructions MUST be relocatable (checked inside)
*/
int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
{
u8 *buf;
int ret;
long rel;
if (!can_optimize((unsigned long)op->kp.addr))
return -EILSEQ;
op->optinsn.insn = get_optinsn_slot();
if (!op->optinsn.insn)
return -ENOMEM;
/*
* Verify if the address gap is in 2GB range, because this uses
* a relative jump.
*/
rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE;
if (abs(rel) > 0x7fffffff)
return -ERANGE;
buf = (u8 *)op->optinsn.insn;
/* Copy instructions into the out-of-line buffer */
ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
if (ret < 0) {
__arch_remove_optimized_kprobe(op, 0);
return ret;
}
op->optinsn.size = ret;
/* Copy arch-dep-instance from template */
memcpy(buf, &optprobe_template_entry, TMPL_END_IDX);
/* Set probe information */
synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op);
/* Set probe function call */
synthesize_relcall(buf + TMPL_CALL_IDX, optimized_callback);
/* Set returning jmp instruction at the tail of out-of-line buffer */
synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
(u8 *)op->kp.addr + op->optinsn.size);
flush_icache_range((unsigned long) buf,
(unsigned long) buf + TMPL_END_IDX +
op->optinsn.size + RELATIVEJUMP_SIZE);
return 0;
}
/* Replace a breakpoint (int3) with a relative jump. */
int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op)
{
unsigned char jmp_code[RELATIVEJUMP_SIZE];
s32 rel = (s32)((long)op->optinsn.insn -
((long)op->kp.addr + RELATIVEJUMP_SIZE));
/* Backup instructions which will be replaced by jump address */
memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
RELATIVE_ADDR_SIZE);
jmp_code[0] = RELATIVEJUMP_OPCODE;
*(s32 *)(&jmp_code[1]) = rel;
/*
* text_poke_smp doesn't support NMI/MCE code modifying.
* However, since kprobes itself also doesn't support NMI/MCE
* code probing, it's not a problem.
*/
text_poke_smp(op->kp.addr, jmp_code, RELATIVEJUMP_SIZE);
return 0;
}
/* Replace a relative jump with a breakpoint (int3). */
void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
{
u8 buf[RELATIVEJUMP_SIZE];
/* Set int3 to first byte for kprobes */
buf[0] = BREAKPOINT_INSTRUCTION;
memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE);
}
static int __kprobes setup_detour_execution(struct kprobe *p,
struct pt_regs *regs,
int reenter)
{
struct optimized_kprobe *op;
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
/* This kprobe is really able to run optimized path. */
op = container_of(p, struct optimized_kprobe, kp);
/* Detour through copied instructions */
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
if (!reenter)
reset_current_kprobe();
preempt_enable_no_resched();
return 1;
}
return 0;
}
#endif
int __init arch_init_kprobes(void) int __init arch_init_kprobes(void)
{ {
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment