Merge tag 'v3.11-rockchip-basics' of...

Merge tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc

From Heiko Stuebner:

Adds basic support for Rockchip Cortex-A9 SoCs.

* tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  clocksource: dw_apb_timer_of: use clocksource_of_init
  clocksource: dw_apb_timer_of: select DW_APB_TIMER
  clocksource: dw_apb_timer_of: add clock-handling
  clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/rtc/dw-apb.txt

@@ -5,9 +5,20 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: IRQ line for the timer.
+- either clocks+clock-names or clock-frequency properties
+
+Optional properties:
+- clocks	: list of clock specifiers, corresponding to entries in
+		  the clock-names property;
+- clock-names	: should contain "timer" and "pclk" entries, matching entries
+		  in the clocks property.
 - clock-frequency: The frequency in HZ of the timer.
 - clock-freq: For backwards compatibility with picoxcell
 
+If using the clock specifiers, the pclk clock is optional, as not all
+systems may use one.
+
+
 Example:
 
 		timer1: timer@ffc09000 {
@@ -23,3 +34,11 @@ Example:
 				clock-frequency = <200000000>;
 				reg = <0xffd00000 0x1000>;
 			};
+
+		timer3: timer@ffe00000 {
+				compatible = "snps,dw-apb-timer-osc";
+				interrupts = <0 170 4>;
+				reg = <0xffe00000 0x1000>;
+				clocks = <&timer_clk>, <&timer_pclk>;
+				clock-names = "timer", "pclk";
+			};

arch/arm/Kconfig

@@ -982,6 +982,8 @@ source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
+source "arch/arm/mach-rockchip/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"

arch/arm/Kconfig.debug

@@ -399,6 +399,13 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
+	config DEBUG_ROCKCHIP_UART
+		bool "Kernel low-level debugging messages via Rockchip UART"
+		depends on ARCH_ROCKCHIP
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
@@ -641,6 +648,32 @@ choice
 		bool "Zoom2/3 UART"
 endchoice
 
+choice
+	prompt "Low-level debug console UART"
+	depends on DEBUG_ROCKCHIP_UART
+
+	config DEBUG_RK29_UART0
+		bool "RK29 UART0"
+
+	config DEBUG_RK29_UART1
+		bool "RK29 UART1"
+
+	config DEBUG_RK29_UART2
+		bool "RK29 UART2"
+
+	config DEBUG_RK3X_UART0
+		bool "RK3X UART0"
+
+	config DEBUG_RK3X_UART1
+		bool "RK3X UART1"
+
+	config DEBUG_RK3X_UART2
+		bool "RK3X UART2"
+
+	config DEBUG_RK3X_UART3
+		bool "RK3X UART3"
+endchoice
+
 choice
 	prompt "Low-level debug console UART"
 	depends on DEBUG_LL && DEBUG_TEGRA_UART
@@ -697,6 +730,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
 				 DEBUG_MMP_UART3
+	default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1

arch/arm/Makefile

@@ -172,6 +172,7 @@ machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PRIMA2)		+= prima2
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx

arch/arm/boot/dts/rk3066a-clocks.dtsi

+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			#clock-cells = <0>;
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy48m: dummy48m {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy150m: dummy150m {
+			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
+			#clock-cells = <0>;
+		};
+
+		clk_gates0: gate-clk@200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_i2s0",
+				"gate_i2s0_frac", "gate_i2s1",
+				"gate_i2s1_frac", "gate_i2s2",
+				"gate_i2s2_frac", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk@200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer2", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates2: gate-clk@200000d8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d8 0x4>;
+			clocks = <&clk_gates2 1>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates2 3>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_periph_src", "gate_aclk_periph",
+				"gate_hclk_periph", "gate_pclk_periph",
+				"gate_smc", "gate_mac",
+				"gate_hsadc", "gate_hsadc_frac",
+				"gate_saradc", "gate_spi0",
+				"gate_spi1", "gate_mmc0",
+				"gate_mac_lbtest", "gate_mmc1",
+				"gate_emmc", "gate_tsadc";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates3: gate-clk@200000dc {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000dc 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+				"gate_dclk_lcdc1", "gate_pclkin_cif0",
+				"gate_pclkin_cif1", "reserved",
+				"reserved", "gate_cif0_out",
+				"gate_cif1_out", "gate_aclk_vepu",
+				"gate_hclk_vepu", "gate_aclk_vdpu",
+				"gate_hclk_vdpu", "gate_gpu_src",
+				"reserved", "gate_xin27m";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates4: gate-clk@200000e0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e0 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+				 <&clk_gates2 1>, <&clk_gates2 1>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 3>, <&clk_gates0 3>,
+				 <&clk_gates0 3>, <&clk_gates2 3>,
+				 <&clk_gates0 4>;
+
+			clock-output-names =
+				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
+				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
+				"gate_aclk_strc_sys", "gate_aclk_l2mem_con",
+				"gate_aclk_intmem", "gate_pclk_tsadc",
+				"gate_hclk_hdmi";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates5: gate-clk@200000e4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e4 0x4>;
+			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 4>, <&clk_gates0 5>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates4 5>,
+				 <&clk_gates4 5>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_dmac1", "gate_aclk_dmac2",
+				"gate_pclk_efuse", "gate_pclk_tzpc",
+				"gate_pclk_grf", "gate_pclk_pmu",
+				"gate_hclk_rom", "gate_pclk_ddrupctl",
+				"gate_aclk_smc", "gate_hclk_nandc",
+				"gate_hclk_mmc0", "gate_hclk_mmc1",
+				"gate_hclk_emmc", "gate_hclk_otg0",
+				"gate_hclk_otg1", "gate_aclk_gpu";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates6: gate-clk@200000e8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e8 0x4>;
+			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
+				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
+				"gate_hclk_cif0", "gate_aclk_cif0",
+				"gate_hclk_cif1", "gate_aclk_cif1",
+				"gate_aclk_ipp", "gate_hclk_ipp",
+				"gate_hclk_rga", "gate_aclk_rga",
+				"gate_hclk_vio_bus", "gate_aclk_vio0",
+				"gate_aclk_vcodec", "gate_shclk_vio_h2h";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates7: gate-clk@200000ec {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000ec 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>;
+
+			clock-output-names =
+				"gate_hclk_emac", "gate_hclk_spdif",
+				"gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
+				"gate_hclk_i2s_8ch", "gate_hclk_hsadc",
+				"gate_hclk_pidf", "gate_pclk_timer0",
+				"gate_pclk_timer1", "gate_pclk_timer2",
+				"gate_pclk_pwm01", "gate_pclk_pwm23",
+				"gate_pclk_spi0", "gate_pclk_spi1",
+				"gate_pclk_saradc", "gate_pclk_wdt";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates8: gate-clk@200000f0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f0 0x4>;
+			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&dummy>, <&clk_gates0 5>;
+
+			clock-output-names =
+				"gate_pclk_uart0", "gate_pclk_uart1",
+				"gate_pclk_uart2", "gate_pclk_uart3",
+				"gate_pclk_i2c0", "gate_pclk_i2c1",
+				"gate_pclk_i2c2", "gate_pclk_i2c3",
+				"gate_pclk_i2c4", "gate_pclk_gpio0",
+				"gate_pclk_gpio1", "gate_pclk_gpio2",
+				"gate_pclk_gpio3", "gate_pclk_gpio4",
+				"reserved", "gate_pclk_gpio6";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates9: gate-clk@200000f4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f4 0x4>;
+			clocks = <&dummy>, <&clk_gates0 5>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&clk_gates1 4>,
+				 <&clk_gates0 5>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>;
+
+			clock-output-names =
+				"gate_clk_core_dbg", "gate_pclk_dbg",
+				"gate_clk_trace", "gate_atclk",
+				"gate_clk_l2c", "gate_aclk_vio1",
+				"gate_pclk_publ", "gate_aclk_intmem0",
+				"gate_aclk_intmem1", "gate_aclk_intmem2",
+				"gate_aclk_intmem3";
+
+			#clock-cells = <1>;
+		};
+	};
+
+};

arch/arm/boot/dts/rk3066a.dtsi

+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "skeleton.dtsi"
+#include "rk3066a-clocks.dtsi"
+
+/ {
+	compatible = "rockchip,rk3066a";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@1013d000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1013d000 0x1000>,
+			      <0x1013c100 0x0100>;
+		};
+
+		L2: l2-cache-controller@10138000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10138000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		local-timer@1013c600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1013c600 0x20>;
+			interrupts = <GIC_PPI 13 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		timer@20038000 {
+			compatible = "snps,dw-apb-timer-osc";
+			reg = <0x20038000 0x100>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_gates1 0>, <&clk_gates7 7>;
+			clock-names = "timer", "pclk";
+		};
+
+		timer@2003a000 {
+			compatible = "snps,dw-apb-timer-osc";
+			reg = <0x2003a000 0x100>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_gates1 1>, <&clk_gates7 8>;
+			clock-names = "timer", "pclk";
+		};
+
+		timer@2000e000 {
+			compatible = "snps,dw-apb-timer-osc";
+			reg = <0x2000e000 0x100>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_gates1 2>, <&clk_gates7 9>;
+			clock-names = "timer", "pclk";
+		};
+
+		pinctrl@20008000 {
+			compatible = "rockchip,rk3066a-pinctrl";
+			reg = <0x20008000 0x150>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio0: gpio0@20034000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20034000 0x100>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 9>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio1: gpio1@2003c000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003c000 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 10>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio2@2003e000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003e000 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 11>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio3@20080000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20080000 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 12>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio4@20084000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20084000 0x100>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 13>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio6@2000a000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2000a000 0x100>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 15>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pcfg_pull_default: pcfg_pull_default {
+				bias-pull-pin-default;
+			};
+
+			pcfg_pull_none: pcfg_pull_none {
+				bias-disable;
+			};
+
+			uart0 {
+				uart0_xfer: uart0-xfer {
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart0_cts: uart0-cts {
+					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart0_rts: uart0-rts {
+					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			uart1 {
+				uart1_xfer: uart1-xfer {
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart1_cts: uart1-cts {
+					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart1_rts: uart1-rts {
+					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			uart2 {
+				uart2_xfer: uart2-xfer {
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+				/* no rts / cts for uart2 */
+			};
+
+			uart3 {
+				uart3_xfer: uart3-xfer {
+					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart3_cts: uart3-cts {
+					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart3_rts: uart3-rts {
+					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			sd0 {
+				sd0_clk: sd0-clk {
+					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_cmd: sd0-cmd {
+					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_cd: sd0-cd {
+					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_wp: sd0-wp {
+					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_bus1: sd0-bus-width1 {
+					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_bus4: sd0-bus-width4 {
+					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			sd1 {
+				sd1_clk: sd1-clk {
+					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_cmd: sd1-cmd {
+					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_cd: sd1-cd {
+					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_wp: sd1-wp {
+					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_bus1: sd1-bus-width1 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_bus4: sd1-bus-width4 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+		};
+
+		uart0: serial@10124000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10124000 0x400>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 8>;
+			status = "disabled";
+		};
+
+		uart1: serial@10126000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10126000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 10>;
+			status = "disabled";
+		};
+
+		uart2: serial@20064000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20064000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 12>;
+			status = "disabled";
+		};
+
+		uart3: serial@20068000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20068000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 14>;
+			status = "disabled";
+		};
+
+		dwmmc@10214000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10214000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+
+		dwmmc@10218000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10218000 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+	};
+};

arch/arm/include/debug/rockchip.S

+/*
+ * Early serial output macro for Rockchip SoCs
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_DEBUG_RK29_UART0)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20060000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed60000
+#elif defined(CONFIG_DEBUG_RK29_UART1)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000
+#elif defined(CONFIG_DEBUG_RK29_UART2)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000
+#elif defined(CONFIG_DEBUG_RK3X_UART0)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10124000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb24000
+#elif defined(CONFIG_DEBUG_RK3X_UART1)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10126000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb26000
+#elif defined(CONFIG_DEBUG_RK3X_UART2)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000
+#elif defined(CONFIG_DEBUG_RK3X_UART3)
+#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000
+#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000
+#endif
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =ROCKCHIP_UART_DEBUG_PHYS_BASE
+	ldr	\rv, =ROCKCHIP_UART_DEBUG_VIRT_BASE
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

arch/arm/mach-picoxcell/Kconfig

@@ -4,7 +4,6 @@ config ARCH_PICOXCELL
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
 	select CPU_V6K
-	select DW_APB_TIMER
 	select DW_APB_TIMER_OF
 	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM

arch/arm/mach-picoxcell/common.c

@@ -15,7 +15,6 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/dw_apb_timer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -88,7 +87,6 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
 	.map_io		= picoxcell_map_io,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= irqchip_init,
-	.init_time	= dw_apb_timer_init,
 	.init_machine	= picoxcell_init_machine,
 	.dt_compat	= picoxcell_dt_match,
 	.restart	= picoxcell_wdt_restart,

arch/arm/mach-rockchip/Kconfig

+config ARCH_ROCKCHIP
+	bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
+	select PINCTRL
+	select PINCTRL_ROCKCHIP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
+	select CACHE_L2X0
+	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_SMP
+	select LOCAL_TIMERS if SMP
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select DW_APB_TIMER_OF
+	help
+	  Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
+	  containing the RK2928, RK30xx and RK31xx series.

arch/arm/mach-rockchip/Makefile

+obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o

arch/arm/mach-rockchip/rockchip.c

+/*
+ * Device Tree support for Rockchip SoCs
+ *
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/irqchip.h>
+#include <linux/dw_apb_timer.h>
+#include <linux/clk-provider.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static void __init rockchip_timer_init(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
+static void __init rockchip_dt_init(void)
+{
+	l2x0_of_init(0, ~0UL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const rockchip_board_dt_compat[] = {
+	"rockchip,rk2928",
+	"rockchip,rk3066a",
+	"rockchip,rk3066b",
+	"rockchip,rk3188",
+	NULL,
+};
+
+DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
+	.init_machine	= rockchip_dt_init,
+	.init_time	= rockchip_timer_init,
+	.dt_compat	= rockchip_board_dt_compat,
+MACHINE_END

arch/arm/mach-socfpga/Kconfig

@@ -7,7 +7,6 @@ config ARCH_SOCFPGA
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
-	select DW_APB_TIMER
 	select DW_APB_TIMER_OF
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PL061 if GPIOLIB

arch/arm/mach-socfpga/socfpga.c

@@ -14,7 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/dw_apb_timer.h>
 #include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
@@ -120,7 +119,6 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
 	.smp		= smp_ops(socfpga_smp_ops),
 	.map_io		= socfpga_map_io,
 	.init_irq	= socfpga_init_irq,
-	.init_time	= dw_apb_timer_init,
 	.init_machine	= socfpga_cyclone5_init,
 	.restart	= socfpga_cyclone5_restart,
 	.dt_compat	= altera_dt_match,

drivers/clocksource/Kconfig

@@ -21,6 +21,8 @@ config DW_APB_TIMER
 
 config DW_APB_TIMER_OF
 	bool
+	select DW_APB_TIMER
+	select CLKSRC_OF
 
 config ARMADA_370_XP_TIMER
 	bool

drivers/clocksource/dw_apb_timer_of.c

@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/clk.h>
 
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
@@ -27,14 +28,37 @@
 static void timer_get_base_and_rate(struct device_node *np,
 				    void __iomem **base, u32 *rate)
 {
+	struct clk *timer_clk;
+	struct clk *pclk;
+
 	*base = of_iomap(np, 0);
 
 	if (!*base)
 		panic("Unable to map regs for %s", np->name);
 
+	/*
+	 * Not all implementations use a periphal clock, so don't panic
+	 * if it's not present
+	 */
+	pclk = of_clk_get_by_name(np, "pclk");
+	if (!IS_ERR(pclk))
+		if (clk_prepare_enable(pclk))
+			pr_warn("pclk for %s is present, but could not be activated\n",
+				np->name);
+
+	timer_clk = of_clk_get_by_name(np, "timer");
+	if (IS_ERR(timer_clk))
+		goto try_clock_freq;
+
+	if (!clk_prepare_enable(timer_clk)) {
+		*rate = clk_get_rate(timer_clk);
+		return;
+	}
+
+try_clock_freq:
 	if (of_property_read_u32(np, "clock-freq", rate) &&
 		of_property_read_u32(np, "clock-frequency", rate))
-		panic("No clock-frequency property for %s", np->name);
+		panic("No clock nor clock-frequency property for %s", np->name);
 }
 
 static void add_clockevent(struct device_node *event_timer)
@@ -57,6 +81,9 @@ static void add_clockevent(struct device_node *event_timer)
 	dw_apb_clockevent_register(ced);
 }
 
+static void __iomem *sched_io_base;
+static u32 sched_rate;
+
 static void add_clocksource(struct device_node *source_timer)
 {
 	void __iomem *iobase;
@@ -71,9 +98,15 @@ static void add_clocksource(struct device_node *source_timer)
 
 	dw_apb_clocksource_start(cs);
 	dw_apb_clocksource_register(cs);
-}
 
-static void __iomem *sched_io_base;
+	/*
+	 * Fallback to use the clocksource as sched_clock if no separate
+	 * timer is found. sched_io_base then points to the current_value
+	 * register of the clocksource timer.
+	 */
+	sched_io_base = iobase + 0x04;
+	sched_rate = rate;
+}
 
 static u32 read_sched_clock(void)
 {
@@ -89,39 +122,37 @@ static const struct of_device_id sptimer_ids[] __initconst = {
 static void init_sched_clock(void)
 {
 	struct device_node *sched_timer;
-	u32 rate;
 
 	sched_timer = of_find_matching_node(NULL, sptimer_ids);
-	if (!sched_timer)
-		panic("No RTC for sched clock to use");
+	if (sched_timer) {
+		timer_get_base_and_rate(sched_timer, &sched_io_base,
+					&sched_rate);
+		of_node_put(sched_timer);
+	}
 
-	timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
-	of_node_put(sched_timer);
-
-	setup_sched_clock(read_sched_clock, 32, rate);
+	setup_sched_clock(read_sched_clock, 32, sched_rate);
 }
 
-static const struct of_device_id osctimer_ids[] __initconst = {
-	{ .compatible = "picochip,pc3x2-timer" },
-	{ .compatible = "snps,dw-apb-timer-osc" },
-	{},
-};
-
-void __init dw_apb_timer_init(void)
+static int num_called;
+static void __init dw_apb_timer_init(struct device_node *timer)
 {
-	struct device_node *event_timer, *source_timer;
-
-	event_timer = of_find_matching_node(NULL, osctimer_ids);
-	if (!event_timer)
-		panic("No timer for clockevent");
-	add_clockevent(event_timer);
-
-	source_timer = of_find_matching_node(event_timer, osctimer_ids);
-	if (!source_timer)
-		panic("No timer for clocksource");
-	add_clocksource(source_timer);
-
-	of_node_put(source_timer);
-
-	init_sched_clock();
+	switch (num_called) {
+	case 0:
+		pr_debug("%s: found clockevent timer\n", __func__);
+		add_clockevent(timer);
+		of_node_put(timer);
+		break;
+	case 1:
+		pr_debug("%s: found clocksource timer\n", __func__);
+		add_clocksource(timer);
+		of_node_put(timer);
+		init_sched_clock();
+		break;
+	default:
+		break;
+	}
+
+	num_called++;
 }
+CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init);

include/linux/dw_apb_timer.h

@@ -53,5 +53,4 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
 
-extern void dw_apb_timer_init(void);
 #endif /* __DW_APB_TIMER_H__ */