Commit c24cb6c8 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'fixes-for-v3.13-rc2' of...

Merge tag 'fixes-for-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v3.13-rc2

First set of fixes for this -rc cycle. A few important
fixes which should be backported to stable kernels and
the usual set of sparse warning fixes. There's also a
regression fix on phy-generic.c which would prevent
am335x-based platforms from having their PHY drivers
probed.
Signed-of-by: default avatarFelipe Balbi <balbi@ti.com>
parents 043e3f83 2cf93bea
......@@ -459,6 +459,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
dep = dwc3_wIndex_to_dep(dwc, wIndex);
if (!dep)
return -EINVAL;
if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
break;
ret = __dwc3_gadget_ep_set_halt(dep, set);
if (ret)
return -EINVAL;
......
......@@ -1200,9 +1200,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
else
dep->flags |= DWC3_EP_STALL;
} else {
if (dep->flags & DWC3_EP_WEDGE)
return 0;
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_CLEARSTALL, &params);
if (ret)
......@@ -1210,7 +1207,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
value ? "set" : "clear",
dep->name);
else
dep->flags &= ~DWC3_EP_STALL;
dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
}
return ret;
......
......@@ -682,6 +682,7 @@ config USB_CONFIGFS_PHONET
config USB_CONFIGFS_MASS_STORAGE
boolean "Mass storage"
depends on USB_CONFIGFS
depends on BLOCK
select USB_F_MASS_STORAGE
help
The Mass Storage Gadget acts as a USB Mass Storage disk drive.
......
......@@ -593,6 +593,7 @@ static void reset_config(struct usb_composite_dev *cdev)
bitmap_zero(f->endpoints, 32);
}
cdev->config = NULL;
cdev->delayed_status = 0;
}
static int set_config(struct usb_composite_dev *cdev,
......
......@@ -1304,7 +1304,7 @@ static struct ffs_data *ffs_data_new(void)
{
struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
if (unlikely(!ffs))
return 0;
return NULL;
ENTER();
......
......@@ -523,7 +523,7 @@ static int fsg_setup(struct usb_function *f,
*/
DBG(fsg, "bulk reset request\n");
raise_exception(fsg->common, FSG_STATE_RESET);
return DELAYED_STATUS;
return USB_GADGET_DELAYED_STATUS;
case US_BULK_GET_MAX_LUN:
if (ctrl->bRequestType !=
......@@ -602,12 +602,13 @@ static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
return true;
}
static int sleep_thread(struct fsg_common *common)
static int sleep_thread(struct fsg_common *common, bool can_freeze)
{
int rc = 0;
/* Wait until a signal arrives or we are woken up */
for (;;) {
if (can_freeze)
try_to_freeze();
set_current_state(TASK_INTERRUPTIBLE);
if (signal_pending(current)) {
......@@ -682,7 +683,7 @@ static int do_read(struct fsg_common *common)
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, false);
if (rc)
return rc;
}
......@@ -937,7 +938,7 @@ static int do_write(struct fsg_common *common)
}
/* Wait for something to happen */
rc = sleep_thread(common);
rc = sleep_thread(common, false);
if (rc)
return rc;
}
......@@ -1504,7 +1505,7 @@ static int throw_away_data(struct fsg_common *common)
}
/* Otherwise wait for something to happen */
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
......@@ -1625,7 +1626,7 @@ static int send_status(struct fsg_common *common)
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
......@@ -1828,7 +1829,7 @@ static int do_scsi_command(struct fsg_common *common)
bh = common->next_buffhd_to_fill;
common->next_buffhd_to_drain = bh;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
......@@ -2174,7 +2175,7 @@ static int get_next_command(struct fsg_common *common)
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
......@@ -2193,7 +2194,7 @@ static int get_next_command(struct fsg_common *common)
/* Wait for the CBW to arrive */
while (bh->state != BUF_STATE_FULL) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
......@@ -2379,7 +2380,7 @@ static void handle_exception(struct fsg_common *common)
}
if (num_active == 0)
break;
if (sleep_thread(common))
if (sleep_thread(common, true))
return;
}
......@@ -2516,7 +2517,7 @@ static int fsg_main_thread(void *common_)
}
if (!common->running) {
sleep_thread(common);
sleep_thread(common, true);
continue;
}
......@@ -3111,7 +3112,7 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
fsg->common->can_stall);
if (ret)
return ret;
fsg_common_set_inquiry_string(fsg->common, 0, 0);
fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
ret = fsg_common_run_thread(fsg->common);
if (ret)
return ret;
......
......@@ -54,6 +54,7 @@
*/
#ifdef CONFIG_ARCH_PXA
#include <mach/pxa25x-udc.h>
#include <mach/hardware.h>
#endif
#ifdef CONFIG_ARCH_LUBBOCK
......
......@@ -1180,6 +1180,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
}
static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
/**
* s3c_hsotg_process_control - process a control request
......@@ -1221,6 +1222,7 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
switch (ctrl->bRequest) {
case USB_REQ_SET_ADDRESS:
s3c_hsotg_disconnect(hsotg);
dcfg = readl(hsotg->regs + DCFG);
dcfg &= ~DCFG_DevAddr_MASK;
dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT;
......@@ -1245,7 +1247,9 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
/* as a fallback, try delivering it to the driver to deal with */
if (ret == 0 && hsotg->driver) {
spin_unlock(&hsotg->lock);
ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
spin_lock(&hsotg->lock);
if (ret < 0)
dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
}
......@@ -1308,10 +1312,12 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep,
return;
}
spin_lock(&hsotg->lock);
if (req->actual == 0)
s3c_hsotg_enqueue_setup(hsotg);
else
s3c_hsotg_process_control(hsotg, req->buf);
spin_unlock(&hsotg->lock);
}
/**
......@@ -2533,7 +2539,6 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS);
call_gadget(hsotg, suspend);
s3c_hsotg_disconnect(hsotg);
}
if (gintsts & GINTSTS_WkUpInt) {
......
......@@ -119,10 +119,6 @@ static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
return curlun->filp != NULL;
}
/* Big enough to hold our biggest descriptor */
#define EP0_BUFSIZE 256
#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
/* Default size of buffer length. */
#define FSG_BUFLEN ((u32)16384)
......
......@@ -370,7 +370,7 @@ static int bot_prepare_reqs(struct f_uas *fu)
return -ENOMEM;
}
void bot_cleanup_old_alt(struct f_uas *fu)
static void bot_cleanup_old_alt(struct f_uas *fu)
{
if (!(fu->flags & USBG_ENABLED))
return;
......
......@@ -91,17 +91,17 @@ static struct usb_zero_options gzero_options = {
* functional coverage for the "USBCV" test harness from USB-IF.
* It's always set if OTG mode is enabled.
*/
unsigned autoresume = DEFAULT_AUTORESUME;
static unsigned autoresume = DEFAULT_AUTORESUME;
module_param(autoresume, uint, S_IRUGO);
MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
/* Maximum Autoresume time */
unsigned max_autoresume;
static unsigned max_autoresume;
module_param(max_autoresume, uint, S_IRUGO);
MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
/* Interval between two remote wakeups */
unsigned autoresume_interval_ms;
static unsigned autoresume_interval_ms;
module_param(autoresume_interval_ms, uint, S_IRUGO);
MODULE_PARM_DESC(autoresume_interval_ms,
"milliseconds to increase successive wakeup delays");
......
......@@ -1809,7 +1809,6 @@ static void musb_free(struct musb *musb)
disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
cancel_work_sync(&musb->irq_work);
musb_host_free(musb);
}
......@@ -1896,6 +1895,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_platform_disable(musb);
musb_generic_disable(musb);
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
/* setup musb parts of the core (especially endpoints) */
status = musb_core_init(plat->config->multipoint
? MUSB_CONTROLLER_MHDRC
......@@ -1905,9 +1907,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
/* attach to the IRQ */
if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
......@@ -1981,6 +1980,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_host_cleanup(musb);
fail3:
cancel_work_sync(&musb->irq_work);
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
fail2_5:
......@@ -2043,6 +2043,7 @@ static int musb_remove(struct platform_device *pdev)
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
cancel_work_sync(&musb->irq_work);
musb_free(musb);
device_init_wakeup(dev, 0);
return 0;
......
......@@ -38,6 +38,7 @@ struct cppi41_dma_channel {
u32 prog_len;
u32 transferred;
u32 packet_sz;
struct list_head tx_check;
};
#define MUSB_DMA_NUM_CHANNELS 15
......@@ -47,6 +48,8 @@ struct cppi41_dma_controller {
struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS];
struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS];
struct musb *musb;
struct hrtimer early_tx;
struct list_head early_tx_list;
u32 rx_mode;
u32 tx_mode;
u32 auto_req;
......@@ -96,31 +99,27 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel)
cppi41_channel->usb_toggle = toggle;
}
static void cppi41_dma_callback(void *private_data)
static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep)
{
struct dma_channel *channel = private_data;
struct cppi41_dma_channel *cppi41_channel = channel->private_data;
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
u8 epnum = hw_ep->epnum;
struct musb *musb = hw_ep->musb;
unsigned long flags;
struct dma_tx_state txstate;
u32 transferred;
spin_lock_irqsave(&musb->lock, flags);
void __iomem *epio = musb->endpoints[epnum].regs;
u16 csr;
dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
&txstate);
transferred = cppi41_channel->prog_len - txstate.residue;
cppi41_channel->transferred += transferred;
csr = musb_readw(epio, MUSB_TXCSR);
if (csr & MUSB_TXCSR_TXPKTRDY)
return false;
return true;
}
dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
hw_ep->epnum, cppi41_channel->transferred,
cppi41_channel->total_len);
static void cppi41_dma_callback(void *private_data);
update_rx_toggle(cppi41_channel);
static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
{
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
struct musb *musb = hw_ep->musb;
if (cppi41_channel->transferred == cppi41_channel->total_len ||
transferred < cppi41_channel->packet_sz) {
if (!cppi41_channel->prog_len) {
/* done, complete */
cppi41_channel->channel.actual_len =
......@@ -150,13 +149,11 @@ static void cppi41_dma_callback(void *private_data)
remain_bytes,
direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (WARN_ON(!dma_desc)) {
spin_unlock_irqrestore(&musb->lock, flags);
if (WARN_ON(!dma_desc))
return;
}
dma_desc->callback = cppi41_dma_callback;
dma_desc->callback_param = channel;
dma_desc->callback_param = &cppi41_channel->channel;
cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
dma_async_issue_pending(dc);
......@@ -166,6 +163,117 @@ static void cppi41_dma_callback(void *private_data)
musb_writew(epio, MUSB_RXCSR, csr);
}
}
}
static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
{
struct cppi41_dma_controller *controller;
struct cppi41_dma_channel *cppi41_channel, *n;
struct musb *musb;
unsigned long flags;
enum hrtimer_restart ret = HRTIMER_NORESTART;
controller = container_of(timer, struct cppi41_dma_controller,
early_tx);
musb = controller->musb;
spin_lock_irqsave(&musb->lock, flags);
list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list,
tx_check) {
bool empty;
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty) {
list_del_init(&cppi41_channel->tx_check);
cppi41_trans_done(cppi41_channel);
}
}
if (!list_empty(&controller->early_tx_list)) {
ret = HRTIMER_RESTART;
hrtimer_forward_now(&controller->early_tx,
ktime_set(0, 150 * NSEC_PER_USEC));
}
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
}
static void cppi41_dma_callback(void *private_data)
{
struct dma_channel *channel = private_data;
struct cppi41_dma_channel *cppi41_channel = channel->private_data;
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
struct musb *musb = hw_ep->musb;
unsigned long flags;
struct dma_tx_state txstate;
u32 transferred;
bool empty;
spin_lock_irqsave(&musb->lock, flags);
dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
&txstate);
transferred = cppi41_channel->prog_len - txstate.residue;
cppi41_channel->transferred += transferred;
dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
hw_ep->epnum, cppi41_channel->transferred,
cppi41_channel->total_len);
update_rx_toggle(cppi41_channel);
if (cppi41_channel->transferred == cppi41_channel->total_len ||
transferred < cppi41_channel->packet_sz)
cppi41_channel->prog_len = 0;
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty) {
cppi41_trans_done(cppi41_channel);
} else {
struct cppi41_dma_controller *controller;
/*
* On AM335x it has been observed that the TX interrupt fires
* too early that means the TXFIFO is not yet empty but the DMA
* engine says that it is done with the transfer. We don't
* receive a FIFO empty interrupt so the only thing we can do is
* to poll for the bit. On HS it usually takes 2us, on FS around
* 110us - 150us depending on the transfer size.
* We spin on HS (no longer than than 25us and setup a timer on
* FS to check for the bit and complete the transfer.
*/
controller = cppi41_channel->controller;
if (musb->g.speed == USB_SPEED_HIGH) {
unsigned wait = 25;
do {
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty)
break;
wait--;
if (!wait)
break;
udelay(1);
} while (1);
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty) {
cppi41_trans_done(cppi41_channel);
goto out;
}
}
list_add_tail(&cppi41_channel->tx_check,
&controller->early_tx_list);
if (!hrtimer_active(&controller->early_tx)) {
hrtimer_start_range_ns(&controller->early_tx,
ktime_set(0, 140 * NSEC_PER_USEC),
40 * NSEC_PER_USEC,
HRTIMER_MODE_REL);
}
}
out:
spin_unlock_irqrestore(&musb->lock, flags);
}
......@@ -364,6 +472,8 @@ static int cppi41_is_compatible(struct dma_channel *channel, u16 maxpacket,
WARN_ON(1);
return 1;
}
if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK)
return 0;
if (cppi41_channel->is_tx)
return 1;
/* AM335x Advisory 1.0.13. No workaround for device RX mode */
......@@ -388,6 +498,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)
return 0;
list_del_init(&cppi41_channel->tx_check);
if (is_tx) {
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~MUSB_TXCSR_DMAENAB;
......@@ -495,6 +606,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
cppi41_channel->controller = controller;
cppi41_channel->port_num = port;
cppi41_channel->is_tx = is_tx;
INIT_LIST_HEAD(&cppi41_channel->tx_check);
musb_dma = &cppi41_channel->channel;
musb_dma->private_data = cppi41_channel;
......@@ -520,6 +632,7 @@ void dma_controller_destroy(struct dma_controller *c)
struct cppi41_dma_controller *controller = container_of(c,
struct cppi41_dma_controller, controller);
hrtimer_cancel(&controller->early_tx);
cppi41_dma_controller_stop(controller);
kfree(controller);
}
......@@ -539,6 +652,9 @@ struct dma_controller *dma_controller_create(struct musb *musb,
if (!controller)
goto kzalloc_fail;
hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
controller->early_tx.function = cppi41_recheck_tx_req;
INIT_LIST_HEAD(&controller->early_tx_list);
controller->musb = musb;
controller->controller.channel_alloc = cppi41_dma_channel_allocate;
......
......@@ -1796,7 +1796,11 @@ int musb_gadget_setup(struct musb *musb)
/* this "gadget" abstracts/virtualizes the controller */
musb->g.name = musb_driver_name;
#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
musb->g.is_otg = 1;
#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET)
musb->g.is_otg = 0;
#endif
musb_g_init_endpoints(musb);
......
......@@ -52,8 +52,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
return am_phy->id;
}
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
USB_PHY_TYPE_USB2, 0, false);
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
if (ret)
return ret;
......@@ -66,8 +65,6 @@ static int am335x_phy_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, am_phy);
return 0;
return ret;
}
static int am335x_phy_remove(struct platform_device *pdev)
......
......@@ -48,8 +48,9 @@ void usb_nop_xceiv_register(void)
if (pd)
return;
pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0);
if (!pd) {
if (IS_ERR(pd)) {
pr_err("Unable to register generic usb transceiver\n");
pd = NULL;
return;
}
}
......@@ -150,10 +151,40 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
struct usb_phy_gen_xceiv_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
enum of_gpio_flags flags = 0;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
0, &flags);
if (nop->gpio_reset == -EPROBE_DEFER)
return -EPROBE_DEFER;
nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
nop->gpio_reset = pdata->gpio_reset;
} else {
nop->gpio_reset = -1;
}
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
if (!nop->phy.otg)
......@@ -218,43 +249,14 @@ EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_phy_gen_xceiv_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct usb_phy_gen_xceiv *nop;
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
if (!nop)
return -ENOMEM;
nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
enum of_gpio_flags flags;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
0, &flags);
if (nop->gpio_reset == -EPROBE_DEFER)
return -EPROBE_DEFER;
nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
nop->gpio_reset = pdata->gpio_reset;
}
err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
......@@ -271,8 +273,6 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, nop);
return 0;
return err;
}
static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)
......
#ifndef _PHY_GENERIC_H_
#define _PHY_GENERIC_H_
#include <linux/usb/usb_phy_gen_xceiv.h>
struct usb_phy_gen_xceiv {
struct usb_phy phy;
struct device *dev;
......@@ -14,6 +16,6 @@ int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
struct usb_phy_gen_xceiv_platform_data *pdata);
#endif
......@@ -164,7 +164,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
mxs_phy->clk = clk;
platform_set_drvdata(pdev, &mxs_phy->phy);
platform_set_drvdata(pdev, mxs_phy);
ret = usb_add_phy_dev(&mxs_phy->phy);
if (ret)
......
......@@ -107,10 +107,10 @@ static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
clk_prepare_enable(priv->clk);
/* Set USB channels in the USBHS UGCTRL2 register */
val = ioread32(priv->base);
val = ioread32(priv->base + USBHS_UGCTRL2_REG);
val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
val |= priv->ugctrl2;
iowrite32(val, priv->base);
iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
}
/* Shutdown USB channels */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment