Commit c4566aec authored by Dan Murphy's avatar Dan Murphy Committed by David S. Miller

net: phy: dp83869: Update port-mirroring to read straps

The device tree may not have the property set for port mirroring
because the hardware may have it strapped. If the property is not in the
DT then check the straps and set the port mirroring bit appropriately.
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 59353266
......@@ -66,6 +66,7 @@
/* STRAP_STS1 bits */
#define DP83869_STRAP_STS1_RESERVED BIT(11)
#define DP83869_STRAP_MIRROR_ENABLED BIT(12)
/* PHYCTRL bits */
#define DP83869_RX_FIFO_SHIFT 12
......@@ -191,10 +192,18 @@ static int dp83869_of_init(struct phy_device *phydev)
else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN;
if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
if (of_property_read_bool(of_node, "enet-phy-lane-swap")) {
dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN;
} else {
/* If the lane swap is not in the DT then check the straps */
ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1);
if (ret < 0)
return ret;
if (ret & DP83869_STRAP_MIRROR_ENABLED)
dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN;
else
dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS;
}
if (of_property_read_u32(of_node, "rx-fifo-depth",
&dp83869->rx_fifo_depth))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment