Merge http://linux-sound.bkbits.net/linux-sound

into home.transmeta.com:/home/torvalds/v2.5/linux

drivers/usb/core/hcd.c

@@ -389,8 +389,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 		break;
 	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
 		// wValue == urb->dev->devaddr
-		dbg ("%s root hub device address %d",
-			hcd->self.bus_name, wValue);
+		dev_dbg (*hcd->controller, "root hub device address %d\n",
+			wValue);
 		break;
 
 	/* INTERFACE REQUESTS (no defined feature/status flags) */
@@ -1188,7 +1188,6 @@ static int hcd_unlink_urb (struct urb *urb)
 	if (urb->transfer_flags & URB_ASYNC_UNLINK)
 		return -EINPROGRESS;
 
-	dev_dbg (*sys, "wait for giveback urb %p\n", urb);
 	wait_for_completion (&splice.done);
 	return 0;
 

drivers/usb/core/hub.c

@@ -57,6 +57,12 @@ static inline char *portspeed (int portstatus)
 }
 #endif
 
+/* for dev_info, dev_dbg, etc */
+static inline struct device *hubdev (struct usb_device *dev)
+{
+	return &dev->actconfig->interface [0].dev;
+}
+
 /* USB 2.0 spec Section 11.24.4.5 */
 static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
 {
@@ -298,7 +304,7 @@ static int usb_hub_configure(struct usb_hub *hub,
 	}
 
 	dev->maxchild = hub->descriptor->bNbrPorts;
-	info("%d port%s detected", dev->maxchild,
+	dev_info (*hubdev (dev), "%d port%s detected\n", dev->maxchild,
 		(dev->maxchild == 1) ? "" : "s");
 
 	le16_to_cpus(&hub->descriptor->wHubCharacteristics);
@@ -521,7 +527,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	}
 
 	/* We found a hub */
-	info("USB hub found at %s", dev->devpath);
+	dev_info (*hubdev (dev), "USB hub found\n");
 
 	hub = kmalloc(sizeof(*hub), GFP_KERNEL);
 	if (!hub) {
@@ -651,8 +657,6 @@ static int usb_hub_port_status(struct usb_device *hub, int port,
 		else {
 			*status = le16_to_cpu(portsts->wPortStatus);
 			*change = le16_to_cpu(portsts->wPortChange); 
-			dbg("port %d, portstatus %x, change %x, %s", port + 1,
-				*status, *change, portspeed(*status));
 			ret = 0;
 		}
 		kfree(portsts);
@@ -710,8 +714,9 @@ static int usb_hub_port_wait_reset(struct usb_device *hub, int port,
 		if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
 			delay = HUB_LONG_RESET_TIME;
 
-		dbg("port %d of hub %s not reset yet, waiting %dms", port + 1,
-			hub->devpath, delay);
+		dev_dbg (*hubdev (hub),
+			"port %d not reset yet, waiting %dms\n",
+			port + 1, delay);
 	}
 
 	return -1;
@@ -735,14 +740,15 @@ static int usb_hub_port_reset(struct usb_device *hub, int port,
 			return status;
 		}
 
-		dbg("port %d of hub %s not enabled, trying reset again...",
-			port + 1, hub->devpath);
+		dev_dbg (*hubdev (hub),
+			"port %d not enabled, trying reset again...\n",
+			port + 1);
 		delay = HUB_LONG_RESET_TIME;
 	}
 
-	err("Cannot enable port %i of hub %s, disabling port.",
-		port + 1, hub->devpath);
-	err("Maybe the USB cable is bad?");
+	dev_err (*hubdev (hub),
+		"Cannot enable port %i.  Maybe the USB cable is bad?\n",
+		port + 1);
 
 	return -1;
 }
@@ -808,8 +814,9 @@ static int usb_hub_port_debounce(struct usb_device *hub, int port)
 	}
 
 	/* XXX Replace this with dbg() when 2.6 is about to ship. */
-	info("debounce: hub %d port %d: delay %dms stable %d status 0x%x\n",
-	    hub->devnum, port, delay_time, stable_count, portstatus);
+	dev_info (*hubdev (hub),
+		"debounce: port %d: delay %dms stable %d status 0x%x\n",
+		port + 1, delay_time, stable_count, portstatus);
 
 	return ((portstatus&USB_PORT_STAT_CONNECTION)) ? 0 : 1;
 }
@@ -822,9 +829,9 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 	unsigned int delay = HUB_SHORT_RESET_TIME;
 	int i;
 
-	dbg("hub %s port %d, portstatus %x, change %x, %s",
-		hub->devpath, port + 1,
-		portstatus, portchange, portspeed (portstatus));
+	dev_dbg (hubstate->intf->dev,
+		"port %d, status %x, change %x, %s\n",
+		port + 1, portstatus, portchange, portspeed (portstatus));
 
 	/* Clear the connection change status */
 	usb_clear_port_feature(hub, port + 1, USB_PORT_FEAT_C_CONNECTION);
@@ -842,7 +849,9 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 	}
 
 	if (usb_hub_port_debounce(hub, port)) {
-		err("connect-debounce failed, port %d disabled", port+1);
+		dev_err (hubstate->intf->dev,
+			"connect-debounce failed, port %d disabled\n",
+			port+1);
 		usb_hub_port_disable(hub, port);
 		return;
 	}
@@ -861,7 +870,8 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 		/* Allocate a new device struct */
 		dev = usb_alloc_dev(hub, hub->bus);
 		if (!dev) {
-			err("couldn't allocate usb_device");
+			dev_err (hubstate->intf->dev,
+				"couldn't allocate usb_device\n");
 			break;
 		}
 
@@ -904,10 +914,12 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 			len = snprintf (dev->devpath, sizeof dev->devpath,
 				"%d", port + 1);
 		if (len == sizeof dev->devpath)
-			warn ("devpath size! usb/%03d/%03d path %s",
+			dev_err (hubstate->intf->dev,
+				"devpath size! usb/%03d/%03d path %s\n",
 				dev->bus->busnum, dev->devnum, dev->devpath);
-		info("new USB device %s-%s, assigned address %d",
-			dev->bus->bus_name, dev->devpath, dev->devnum);
+		dev_info (hubstate->intf->dev,
+			"new USB device on port %d, assigned address %d\n",
+			port + 1, dev->devnum);
 
 		/* put the device in the global device tree. the hub port
 		 * is the "bus_id"; hubs show in hierarchy like bridges
@@ -992,12 +1004,11 @@ static void usb_hub_events(void)
 			}
 
 			if (portchange & USB_PORT_STAT_C_CONNECTION) {
-				dbg("hub %s port %d connection change",
-					dev->devpath, i + 1);
 				usb_hub_port_connect_change(hub, i, portstatus, portchange);
 			} else if (portchange & USB_PORT_STAT_C_ENABLE) {
-				dbg("hub %s port %d enable change, status %x",
-					dev->devpath, i + 1, portstatus);
+				dev_dbg (*hubdev (dev),
+					"port %d enable change, status %x\n",
+					i + 1, portstatus);
 				usb_clear_port_feature(dev,
 					i + 1, USB_PORT_FEAT_C_ENABLE);
 

drivers/usb/core/inode.c

@@ -487,10 +487,15 @@ static void fs_remove_file (struct dentry *dentry)
  * It will be removed when the 2.7.x development cycle is started.
  * You have been warned :)
  */
+static struct file_system_type usbdevice_fs_type;
 
 static struct super_block *usb_get_sb(struct file_system_type *fs_type,
 	int flags, char *dev_name, void *data)
 {
+	if (fs_type == &usbdevice_fs_type)
+		printk (KERN_INFO "Please use the 'usbfs' filetype instead, "
+				"the 'usbdevfs' name is depreciated.\n");
+
 	return get_sb_single(fs_type, flags, data, usbfs_fill_super);
 }
 

drivers/usb/host/ehci-dbg.c

@@ -18,21 +18,45 @@
 
 /* this file is part of ehci-hcd.c */
 
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,50)
+
 #define ehci_dbg(ehci, fmt, args...) \
 	dev_dbg (*(ehci)->hcd.controller, fmt, ## args )
+#define ehci_err(ehci, fmt, args...) \
+	dev_err (*(ehci)->hcd.controller, fmt, ## args )
+#define ehci_info(ehci, fmt, args...) \
+	dev_info (*(ehci)->hcd.controller, fmt, ## args )
+#define ehci_warn(ehci, fmt, args...) \
+	dev_warn (*(ehci)->hcd.controller, fmt, ## args )
 
-#ifdef EHCI_VERBOSE_DEBUG
-#define ehci_vdbg(ehci, fmt, args...) \
-	dev_dbg (*(ehci)->hcd.controller, fmt, ## args )
 #else
-#define ehci_vdbg(ehci, fmt, args...) do { } while (0)
+
+#ifdef DEBUG
+#define ehci_dbg(ehci, fmt, args...) \
+	printk(KERN_DEBUG "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
+#else
+#define ehci_dbg(ehci, fmt, args...) do { } while (0)
+#endif
+
+#define ehci_err(ehci, fmt, args...) \
+	printk(KERN_ERR "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
+#define ehci_info(ehci, fmt, args...) \
+	printk(KERN_INFO "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
+#define ehci_warn(ehci, fmt, args...) \
+	printk(KERN_WARNING "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
 #endif
 
 
 #ifdef EHCI_VERBOSE_DEBUG
 #	define vdbg dbg
+#	define ehci_vdbg ehci_dbg
 #else
-	static inline void vdbg (char *fmt, ...) { }
+#	define vdbg(fmt,args...) do { } while (0)
+#	define ehci_vdbg(ehci, fmt, args...) do { } while (0)
 #endif
 
 #ifdef	DEBUG
@@ -289,7 +313,8 @@ static void qh_lines (struct ehci_qh *qh, char **nextp, unsigned *sizep)
 
 	scratch = cpu_to_le32p (&qh->hw_info1);
 	hw_curr = cpu_to_le32p (&qh->hw_current);
-	temp = snprintf (next, size, "qh/%p dev%d %cs ep%d %08x %08x (%08x %08x)",
+	temp = snprintf (next, size,
+			"qh/%p dev%d %cs ep%d %08x %08x (%08x %08x)",
 			qh, scratch & 0x007f,
 			speed_char (scratch),
 			(scratch >> 8) & 0x000f,

drivers/usb/host/ehci-hub.c

@@ -315,7 +315,7 @@ static int ehci_hub_control (
 					wIndex + 1);
 				temp |= PORT_OWNER;
 			} else {
-				ehci_vdbg (ehci, "port %d reset", wIndex + 1);
+				ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 				temp |= PORT_RESET;
 				temp &= ~PORT_PE;
 

drivers/usb/host/ehci-mem.c

@@ -73,8 +73,11 @@ static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, int flags)
 	dma_addr_t		dma;
 
 	qtd = pci_pool_alloc (ehci->qtd_pool, flags, &dma);
-	if (qtd != 0)
+	if (qtd != 0) {
 		ehci_qtd_init (qtd, dma);
+		if (ehci->async)
+			qtd->hw_alt_next = ehci->async->hw_alt_next;
+	}
 	return qtd;
 }
 

drivers/usb/host/ehci-sched.c

@@ -190,7 +190,7 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	/* posted write ... PSS happens later */
 	ehci->hcd.state = USB_STATE_RUNNING;
 
-	/* make sure tasklet scans these */
+	/* make sure ehci_work scans these */
 	ehci->next_uframe = readl (&ehci->regs->frame_index)
 				% (ehci->periodic_size << 3);
 	return 0;
@@ -495,7 +495,8 @@ static unsigned
 intr_complete (
 	struct ehci_hcd	*ehci,
 	unsigned	frame,
-	struct ehci_qh	*qh
+	struct ehci_qh	*qh,
+	struct pt_regs	*regs
 ) {
 	unsigned	count;
 
@@ -509,7 +510,7 @@ intr_complete (
 	}
 	
 	/* handle any completions */
-	count = qh_completions (ehci, qh);
+	count = qh_completions (ehci, qh, regs);
 
 	if (unlikely (list_empty (&qh->qtd_list)))
 		intr_deschedule (ehci, qh, 0);
@@ -867,7 +868,8 @@ static unsigned
 itd_complete (
 	struct ehci_hcd	*ehci,
 	struct ehci_itd	*itd,
-	unsigned	uframe
+	unsigned	uframe,
+	struct pt_regs	*regs
 ) {
 	struct urb				*urb = itd->urb;
 	struct usb_iso_packet_descriptor	*desc;
@@ -922,7 +924,7 @@ itd_complete (
 
 	/* complete() can reenter this HCD */
 	spin_unlock (&ehci->lock);
-	usb_hcd_giveback_urb (&ehci->hcd, urb, NULL);
+	usb_hcd_giveback_urb (&ehci->hcd, urb, regs);
 	spin_lock (&ehci->lock);
 
 	/* defer stopping schedule; completion can submit */
@@ -973,7 +975,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags)
 /*-------------------------------------------------------------------------*/
 
 static void
-scan_periodic (struct ehci_hcd *ehci)
+scan_periodic (struct ehci_hcd *ehci, struct pt_regs *regs)
 {
 	unsigned	frame, clock, now_uframe, mod;
 	unsigned	count = 0;
@@ -999,14 +1001,6 @@ scan_periodic (struct ehci_hcd *ehci)
 		u32			type, *hw_p;
 		unsigned		uframes;
 
-		/* keep latencies down: let any irqs in */
-		if (count > max_completions) {
-			spin_unlock_irq (&ehci->lock);
-			cpu_relax ();
-			count = 0;
-			spin_lock_irq (&ehci->lock);
-		}
-
 restart:
 		/* scan schedule to _before_ current frame index */
 		if (frame == clock)
@@ -1031,7 +1025,7 @@ scan_periodic (struct ehci_hcd *ehci)
 				temp = q.qh->qh_next;
 				type = Q_NEXT_TYPE (q.qh->hw_next);
 				count += intr_complete (ehci, frame,
-						qh_get (q.qh));
+						qh_get (q.qh), regs);
 				qh_put (ehci, q.qh);
 				q = temp;
 				break;
@@ -1064,7 +1058,7 @@ scan_periodic (struct ehci_hcd *ehci)
 
 						/* might free q.itd ... */
 						count += itd_complete (ehci,
-							temp.itd, uf);
+							temp.itd, uf, regs);
 						break;
 					}
 				}

drivers/usb/host/ehci.h

@@ -65,9 +65,6 @@ struct ehci_hcd {			/* one per controller */
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_sched;	/* periodic activity count */
 
-	/* deferred work from IRQ, etc */
-	struct tasklet_struct	tasklet;
-
 	/* per root hub port */
 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
 

drivers/usb/media/ibmcam.c

@@ -87,7 +87,7 @@ typedef struct {
 } ibmcam_t;
 #define	IBMCAM_T(uvd)	((ibmcam_t *)((uvd)->user_data))
 
-usbvideo_t *cams = NULL;
+struct usbvideo *cams = NULL;
 
 static int debug = 0;
 
@@ -249,7 +249,7 @@ static videosize_t ibmcam_size_to_videosize(int size)
  * History:
  * 1/21/00  Created.
  */
-static ParseState_t ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
+static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
 {
 	struct usbvideo_frame *frame;
 	ibmcam_t *icam;
@@ -397,7 +397,7 @@ case IBMCAM_MODEL_4:
  * 21-Jan-2000 Created.
  * 12-Oct-2000 Reworked to reflect interlaced nature of the data.
  */
-static ParseState_t ibmcam_parse_lines(
+static enum ParseState ibmcam_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -662,7 +662,7 @@ static ParseState_t ibmcam_parse_lines(
  * them both as R component in attempt to at least partially recover the
  * lost resolution.
  */
-static ParseState_t ibmcam_model2_320x240_parse_lines(
+static enum ParseState ibmcam_model2_320x240_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -816,7 +816,7 @@ static ParseState_t ibmcam_model2_320x240_parse_lines(
 		return scan_Continue;
 }
 
-static ParseState_t ibmcam_model3_parse_lines(
+static enum ParseState ibmcam_model3_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -961,7 +961,7 @@ static ParseState_t ibmcam_model3_parse_lines(
  * History:
  * 10-Feb-2001 Created.
  */
-static ParseState_t ibmcam_model4_128x96_parse_lines(
+static enum ParseState ibmcam_model4_128x96_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -1051,7 +1051,7 @@ static ParseState_t ibmcam_model4_128x96_parse_lines(
  */
 void ibmcam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame)
 {
-	ParseState_t newstate;
+	enum ParseState newstate;
 	long copylen = 0;
 	int mod = IBMCAM_T(uvd)->camera_model;
 

drivers/usb/media/konicawc.c

@@ -51,7 +51,7 @@ enum frame_sizes {
 
 #define MAX_FRAME_SIZE	SIZE_320X240
 
-static usbvideo_t *cams;
+static struct usbvideo *cams;
 
 #ifdef CONFIG_USB_DEBUG
 static int debug;

drivers/usb/media/pwc-ctrl.c

@@ -446,8 +446,8 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
 			Info("Video mode %s@%d fps is only supported with the decompressor module (pwcx).\n", size2name[size], frames);
 		else {
 			Err("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret);
-			return ret;
 		}
+		return ret;
 	}
 	pdev->view.x = width;
 	pdev->view.y = height;
@@ -1535,6 +1535,14 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 		break;
 	}
 
+	case VIDIOCPWCGREALSIZE:
+	{
+		struct pwc_imagesize *size = arg;
+		
+		size->width = pdev->image.x;
+		size->height = pdev->image.y;
+		break;
+	}	
 
 	default:
 		ret = -ENOIOCTLCMD;

drivers/usb/media/pwc-if.c

@@ -77,7 +77,7 @@ static struct usb_device_id pwc_device_table [] = {
 	{ USB_DEVICE(0x0471, 0x0312) },
 	{ USB_DEVICE(0x069A, 0x0001) }, /* Askey */
 	{ USB_DEVICE(0x046D, 0x08b0) }, /* Logitech QuickCam Pro 3000 */
-	{ USB_DEVICE(0x046D, 0x08b1) }, /* Logitech QuickCam for Notebooks */
+	{ USB_DEVICE(0x046D, 0x08b1) }, /* Logitech QuickCam Notebook Pro */
 	{ USB_DEVICE(0x046D, 0x08b2) }, /* Logitech QuickCam Pro 4000 */
 	{ USB_DEVICE(0x046D, 0x08b3) }, /* Logitech QuickCam Zoom */
 	{ USB_DEVICE(0x055D, 0x9000) }, /* Samsung */
@@ -1064,7 +1064,6 @@ static int pwc_video_open(struct inode *inode, struct file *file)
 	i = pwc_isoc_init(pdev);
 	if (i) {
 		Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i);
-		MOD_DEC_USE_COUNT;
 		up(&pdev->modlock);
 		return i;
 	}
@@ -1689,8 +1688,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			type_id = 730;
 			break;
 		case 0x08b1:
-			Info("Logitech QuickCam for Noteboos USB webcam detected.\n");
-			name = "Logitech QuickCam Notebook";
+			Info("Logitech QuickCam Notebook Pro USB webcam detected.\n");
+			name = "Logitech QuickCam Notebook Pro";
 			type_id = 740; /* ?? unknown sensor */
 			break;
 		case 0x08b2:

drivers/usb/media/pwc-ioctl.h

@@ -18,12 +18,13 @@
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-/*         This is pwc-ioctl.h belonging to PWC 8.7                        */
+/*         This is pwc-ioctl.h belonging to PWC 8.10                        */
 
 /* 
    Changes
    2001/08/03  Alvarado   Added ioctl constants to access methods for 
                           changing white balance and red/blue gains
+   2002/12/15  G. H. Fernandez-Toribio   VIDIOCGREALSIZE
  */
 
 /* These are private ioctl() commands, specific for the Philips webcams.
@@ -104,7 +105,12 @@ struct pwc_leds
 	int led_off;			/* Led off-time; range = 0..25000  */
 };
 
-
+/* Image size (used with GREALSIZE) */
+struct pwc_imagesize
+{
+	int width;
+	int height;
+};
 
  /* Restore user settings */
 #define VIDIOCPWCRUSER		_IO('v', 192)
@@ -173,4 +179,7 @@ struct pwc_leds
 #define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
 #define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
 
+ /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
+#define VIDIOCPWCGREALSIZE	_IOR('v', 210, struct pwc_imagesize)
+ 
 #endif

drivers/usb/media/pwc-uncompress.h

@@ -20,8 +20,8 @@
    significant change should be reflected by increasing the 
    pwc_decompressor_version major number.
  */
-#ifndef PWC_DEC_H
-#define PWC_DEC_H
+#ifndef PWC_UNCOMPRESS_H
+#define PWC_UNCOMPRESS_H
 
 #include <linux/config.h>
 #include <linux/list.h>

drivers/usb/media/pwc.h

@@ -60,8 +60,8 @@
 
 /* Version block */
 #define PWC_MAJOR	8
-#define PWC_MINOR	9
-#define PWC_VERSION 	"8.9"
+#define PWC_MINOR	10
+#define PWC_VERSION 	"8.10"
 #define PWC_NAME 	"pwc"
 
 /* Turn certain features on/off */

drivers/usb/media/ultracam.c

@@ -25,7 +25,7 @@ typedef struct {
 } ultracam_t;
 #define	ULTRACAM_T(uvd)	((ultracam_t *)((uvd)->user_data))
 
-static usbvideo_t *cams = NULL;
+static struct usbvideo *cams = NULL;
 
 static int debug = 0;
 

drivers/usb/media/usbvideo.c

@@ -42,8 +42,8 @@ MODULE_PARM(video_nr, "i");
  * Local prototypes.
  */
 #if USES_PROC_FS
-static void usbvideo_procfs_level1_create(usbvideo_t *ut);
-static void usbvideo_procfs_level1_destroy(usbvideo_t *ut);
+static void usbvideo_procfs_level1_create(struct usbvideo *ut);
+static void usbvideo_procfs_level1_destroy(struct usbvideo *ut);
 static void usbvideo_procfs_level2_create(struct uvd *uvd);
 static void usbvideo_procfs_level2_destroy(struct uvd *uvd);
 static int usbvideo_default_procfs_read_proc(
@@ -765,7 +765,7 @@ static void usbvideo_ClientDecModCount(struct uvd *uvd)
 }
 
 int usbvideo_register(
-	usbvideo_t **pCams,
+	struct usbvideo **pCams,
 	const int num_cams,
 	const int num_extra,
 	const char *driverName,
@@ -773,7 +773,7 @@ int usbvideo_register(
 	struct module *md,
 	const struct usb_device_id *id_table)
 {
-	usbvideo_t *cams;
+	struct usbvideo *cams;
 	int i, base_size;
 
 	/* Check parameters for sanity */
@@ -788,10 +788,10 @@ int usbvideo_register(
 		return -EINVAL;
 	}
 
-	base_size = num_cams * sizeof(struct uvd) + sizeof(usbvideo_t);
-	cams = (usbvideo_t *) kmalloc(base_size, GFP_KERNEL);
+	base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
+	cams = (struct usbvideo *) kmalloc(base_size, GFP_KERNEL);
 	if (cams == NULL) {
-		err("Failed to allocate %d. bytes for usbvideo_t", base_size);
+		err("Failed to allocate %d. bytes for usbvideo struct", base_size);
 		return -ENOMEM;
 	}
 	dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
@@ -823,7 +823,7 @@ int usbvideo_register(
 #else /* !USES_PROC_FS */
 	/* Report a warning so that user knows why there is no /proc entries */
 	if ((cams->cb.procfs_read != NULL) || (cams->cb.procfs_write == NULL)) {
-		dbg("%s: /proc fs support requested but not configured!", proc);
+		dbg("%s: /proc fs support requested but not configured!", __FUNCTION__);
 	}
 #endif
 	cams->num_cameras = num_cams;
@@ -889,9 +889,9 @@ EXPORT_SYMBOL(usbvideo_register);
  * if you had some dynamically allocated components in ->user field then
  * you should free them before calling here.
  */
-void usbvideo_Deregister(usbvideo_t **pCams)
+void usbvideo_Deregister(struct usbvideo **pCams)
 {
-	usbvideo_t *cams;
+	struct usbvideo *cams;
 	int i;
 
 	if (pCams == NULL) {
@@ -1049,12 +1049,12 @@ static void usbvideo_CameraRelease(struct uvd *uvd)
  * History:
  * 27-Jan-2000 Created.
  */
-static int usbvideo_find_struct(usbvideo_t *cams)
+static int usbvideo_find_struct(struct usbvideo *cams)
 {
 	int u, rv = -1;
 
 	if (cams == NULL) {
-		err("No usbvideo_t handle?");
+		err("No usbvideo handle?");
 		return -1;
 	}
 	down(&cams->lock);
@@ -1089,13 +1089,13 @@ static struct video_device usbvideo_template = {
 	.fops =       &usbvideo_fops,
 };
 
-struct uvd *usbvideo_AllocateDevice(usbvideo_t *cams)
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
 {
 	int i, devnum;
 	struct uvd *uvd = NULL;
 
 	if (cams == NULL) {
-		err("No usbvideo_t handle?");
+		err("No usbvideo handle?");
 		return NULL;
 	}
 
@@ -2357,7 +2357,7 @@ static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
 
 extern struct proc_dir_entry *video_proc_entry;
 
-static void usbvideo_procfs_level1_create(usbvideo_t *ut)
+static void usbvideo_procfs_level1_create(struct usbvideo *ut)
 {
 	if (ut == NULL) {
 		err("%s: ut == NULL", __FUNCTION__);
@@ -2376,7 +2376,7 @@ static void usbvideo_procfs_level1_create(usbvideo_t *ut)
 	}
 }
 
-static void usbvideo_procfs_level1_destroy(usbvideo_t *ut)
+static void usbvideo_procfs_level1_destroy(struct usbvideo *ut)
 {
 	if (ut == NULL) {
 		err("%s: ut == NULL", __FUNCTION__);

drivers/usb/media/usbvideo.h

@@ -126,37 +126,37 @@ struct RingQueue {
 	wait_queue_head_t wqh;	/* Processes waiting */
 };
 
-typedef enum {
+enum ScanState {
 	ScanState_Scanning,	/* Scanning for header */
 	ScanState_Lines		/* Parsing lines */
-} ScanState_t;
+};
 
 /* Completion states of the data parser */
-typedef enum {
+enum ParseState {
 	scan_Continue,		/* Just parse next item */
 	scan_NextFrame,		/* Frame done, send it to V4L */
 	scan_Out,		/* Not enough data for frame */
 	scan_EndParse		/* End parsing */
-} ParseState_t;
+};
 
-typedef enum {
+enum FrameState {
 	FrameState_Unused,	/* Unused (no MCAPTURE) */
 	FrameState_Ready,	/* Ready to start grabbing */
 	FrameState_Grabbing,	/* In the process of being grabbed into */
 	FrameState_Done,	/* Finished grabbing, but not been synced yet */
 	FrameState_Done_Hold,	/* Are syncing or reading */
 	FrameState_Error,	/* Something bad happened while processing */
-} FrameState_t;
+};
 
 /*
  * Some frames may contain only even or odd lines. This type
  * specifies what type of deinterlacing is required.
  */
-typedef enum {
+enum Deinterlace {
 	Deinterlace_None=0,
 	Deinterlace_FillOddLines,
 	Deinterlace_FillEvenLines
-} Deinterlace_t;
+};
 
 #define USBVIDEO_NUMFRAMES	2	/* How many frames we work with */
 #define USBVIDEO_NUMSBUF	2	/* How many URBs linked in a ring */
@@ -175,9 +175,9 @@ struct usbvideo_frame {
 	videosize_t request;	/* That's what the application asked for */
 	unsigned short palette;	/* The desired format */
 
-	FrameState_t frameState;/* State of grabbing */
-	ScanState_t scanstate;	/* State of scanning */
-	Deinterlace_t deinterlace;
+	enum FrameState frameState;/* State of grabbing */
+	enum ScanState scanstate;	/* State of scanning */
+	enum Deinterlace deinterlace;
 	int flags;		/* USBVIDEO_FRAME_FLAG_xxx bit flags */
 
 	int curline;		/* Line of frame we're working on */
@@ -199,12 +199,12 @@ struct usbvideo_statistics {
 	unsigned long iso_err_count;	/* How many bad ISO packets received */
 };
 
-struct s_usbvideo_t;
+struct usbvideo;
 
 struct uvd {
 	struct video_device vdev;	/* Must be the first field! */
 	struct usb_device *dev;
-	struct s_usbvideo_t *handle;	/* Points back to the usbvideo_t */
+	struct usbvideo *handle;	/* Points back to the struct usbvideo */
 	void *user_data;		/* Camera-dependent data */
 	int user_size;			/* Size of that camera-dependent data */
 	int debug;			/* Debug level for usbvideo */
@@ -273,7 +273,7 @@ struct usbvideo_cb {
 	int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
 };
 
-struct s_usbvideo_t {
+struct usbvideo {
 	int num_cameras;		/* As allocated */
 	struct usb_driver usbdrv;	/* Interface to the USB stack */
 	char drvName[80];		/* Driver name */
@@ -285,7 +285,7 @@ struct s_usbvideo_t {
 	struct proc_dir_entry *procfs_dEntry;	/* /proc/video/MYDRIVER */
 	struct module *md_module;	/* Minidriver module */
 };
-typedef struct s_usbvideo_t usbvideo_t;
+
 
 /*
  * This macro retrieves callback address from the struct uvd object.
@@ -332,16 +332,16 @@ void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
 unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
 
 int usbvideo_register(
-	usbvideo_t **pCams,
+	struct usbvideo **pCams,
 	const int num_cams,
 	const int num_extra,
 	const char *driverName,
 	const struct usbvideo_cb *cbTable,
 	struct module *md,
 	const struct usb_device_id *id_table);
-struct uvd *usbvideo_AllocateDevice(usbvideo_t *cams);
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
 int usbvideo_RegisterVideoDevice(struct uvd *uvd);
-void usbvideo_Deregister(usbvideo_t **uvt);
+void usbvideo_Deregister(struct usbvideo **uvt);
 
 int usbvideo_v4l_initialize(struct video_device *dev);
 

drivers/usb/misc/speedtouch.c

@@ -144,8 +144,9 @@ struct udsl_instance_data *minor_data[MAX_UDSL];
 static const char udsl_driver_name[] = "Alcatel SpeedTouch USB";
 
 /* data thread */
-static int datapid = 0;
 DECLARE_WAIT_QUEUE_HEAD (udsl_wqh);
+static DECLARE_COMPLETION(thread_grave);
+static unsigned int datapid;
 
 #ifdef DEBUG_PACKET
 int udsl_print_packet (const unsigned char *data, int len);
@@ -431,21 +432,36 @@ int udsl_atm_processqueue_thread (void *data)
 	strcpy (current->comm, "kSpeedSARd");
 
 	add_wait_queue (&udsl_wqh, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
 
 	for (;;) {
-		interruptible_sleep_on (&udsl_wqh);
+		schedule();
 		if (signal_pending (current))
 			break;
 		PDEBUG ("SpeedSARd awoke\n");
+retry:
 		for (i = 0; i < MAX_UDSL; i++)
 			if (minor_data[i])
 				udsl_atm_processqueue (minor_data[i]);
+		set_current_state(TASK_INTERRUPTIBLE);
+		/* we must check for data recieved and restart processing if there's any */
+		for (i = 0; i < MAX_UDSL; i++) {
+			spin_lock_irq(&minor_data[i]->recvqlock);
+			if (!skb_queue_empty(&minor_data[i]->recvqueue)) {
+				spin_unlock_irq(&minor_data[i]->recvqlock);
+				set_current_state(TASK_RUNNING);
+				goto retry;
+			} else {
+				spin_unlock_irq(&minor_data[i]->recvqlock);
+			}
+		}
 	};
 
+	set_current_state(TASK_RUNNING);
 	remove_wait_queue (&udsl_wqh, &wait);
-	datapid = 0;
 	PDEBUG ("SpeedSARd is exiting\n");
-	return 0;
+	complete_and_exit(&thread_grave, 0);
+	return 0; //never reached
 }
 
 
@@ -461,16 +477,7 @@ void udsl_atm_sar_stop (void)
 	/* Kill the thread */
 	ret = kill_proc (datapid, SIGTERM, 1);
 	if (!ret) {
-		/* Wait 10 seconds */
-		int count = 10 * 100;
-
-		while (datapid && --count) {
-			current->state = TASK_INTERRUPTIBLE;
-			schedule_timeout (1);
-		}
-
-		if (!count)
-			err ("giving up on killing SpeedSAR thread.");
+		wait_for_completion(&thread_grave);
 	}
 }
 
@@ -598,7 +605,7 @@ static void udsl_usb_send_data_complete (struct urb *urb, struct pt_regs *regs)
 		       (unsigned char *) ctx->skb->data,
 		       ctx->skb->len, udsl_usb_send_data_complete, ctx);
 
-	err = usb_submit_urb (urb, GFP_KERNEL);
+	err = usb_submit_urb (urb, GFP_ATOMIC);
 
 	PDEBUG ("udsl_usb_send_data_completion (send packet %p with length %d), retval = %d\n",
 		ctx->skb, ctx->skb->len, err);
@@ -747,7 +754,7 @@ void udsl_usb_data_receive (struct urb *urb, struct pt_regs *regs)
 		       usb_rcvbulkpipe (instance->usb_dev, UDSL_ENDPOINT_DATA_IN),
 		       (unsigned char *) ctx->skb->data,
 		       UDSL_RECEIVE_BUFFER_SIZE, udsl_usb_data_receive, ctx);
-	usb_submit_urb (urb, GFP_KERNEL);
+	usb_submit_urb (urb, GFP_ATOMIC);
 	return;
 };
 
@@ -845,7 +852,6 @@ static int udsl_usb_data_exit (struct udsl_instance_data *instance)
 		if ((!ctx->urb) || (!ctx->skb))
 			continue;
 
-		if (ctx->urb->status == -EINPROGRESS)
 		usb_unlink_urb (ctx->urb);
 
 		usb_free_urb (ctx->urb);
@@ -856,7 +862,6 @@ static int udsl_usb_data_exit (struct udsl_instance_data *instance)
 	for (i = 0; i < UDSL_NUMBER_SND_URBS; i++) {
 		struct udsl_usb_send_data_context *ctx = &(instance->send_ctx[i]);
 
-		if (ctx->urb->status == -EINPROGRESS)
 		usb_unlink_urb (ctx->urb);
 
 		if (ctx->skb)

drivers/usb/misc/usblcd.c

@@ -98,7 +98,7 @@ ioctl_lcd(struct inode *inode, struct file *file, unsigned int cmd,
 			return -EFAULT;
 		break;
 	default:
-		return -ENOIOCTLCMD;
+		return -ENOTTY;
 		break;
 	}
 

drivers/usb/serial/belkin_sa.c

@@ -126,6 +126,7 @@ static struct usb_driver belkin_driver = {
 static struct usb_serial_device_type belkin_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Belkin / Peracom / GoHubs USB Serial Adapter",
+	.short_name =		"belkin",
 	.id_table =		id_table_combined,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/bus.c

@@ -121,6 +121,9 @@ int usb_serial_bus_register(struct usb_serial_device_type *device)
 {
 	int retval;
 
+	if (device->short_name)
+		device->driver.name = (char *)device->short_name;
+	else
 		device->driver.name = (char *)device->name;
 	device->driver.bus = &usb_serial_bus_type;
 	device->driver.probe = usb_serial_device_probe;

drivers/usb/serial/cyberjack.c

@@ -83,6 +83,7 @@ static struct usb_driver cyberjack_driver = {
 static struct usb_serial_device_type cyberjack_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Reiner SCT Cyberjack USB card reader",
+	.short_name =		"cyberjack",
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/generic.c

@@ -43,6 +43,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 struct usb_serial_device_type usb_serial_generic_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Generic",
+	.short_name =		"generic",
 	.id_table =		generic_device_ids,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,

drivers/usb/serial/io_tables.h

@@ -100,6 +100,7 @@ MODULE_DEVICE_TABLE (usb, id_table_combined);
 static struct usb_serial_device_type edgeport_1port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 1 port adapter",
+	.short_name		= "edgeport_1",
 	.id_table		= edgeport_1port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -122,6 +123,7 @@ static struct usb_serial_device_type edgeport_1port_device = {
 static struct usb_serial_device_type edgeport_2port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 2 port adapter",
+	.short_name		= "edgeport_2",
 	.id_table		= edgeport_2port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -144,6 +146,7 @@ static struct usb_serial_device_type edgeport_2port_device = {
 static struct usb_serial_device_type edgeport_4port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 4 port adapter",
+	.short_name		= "edgeport_4",
 	.id_table		= edgeport_4port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -166,6 +169,7 @@ static struct usb_serial_device_type edgeport_4port_device = {
 static struct usb_serial_device_type edgeport_8port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 8 port adapter",
+	.short_name		= "edgeport_8",
 	.id_table		= edgeport_8port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,

drivers/usb/serial/io_ti.c

@@ -2635,6 +2635,7 @@ static void edge_shutdown (struct usb_serial *serial)
 static struct usb_serial_device_type edgeport_1port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport TI 1 port adapter",
+	.short_name		= "edgeport_ti_1",
 	.id_table		= edgeport_1port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -2657,6 +2658,7 @@ static struct usb_serial_device_type edgeport_1port_device = {
 static struct usb_serial_device_type edgeport_2port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport TI 2 port adapter",
+	.short_name		= "edgeport_ti_2",
 	.id_table		= edgeport_2port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 2,

drivers/usb/serial/keyspan.h

@@ -481,6 +481,7 @@ static struct usb_device_id keyspan_4port_ids[] = {
 static struct usb_serial_device_type keyspan_pre_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan - (without firmware)",
+	.short_name		= "keyspan_no_firm",
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -492,6 +493,7 @@ static struct usb_serial_device_type keyspan_pre_device = {
 static struct usb_serial_device_type keyspan_1port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan 1 port adapter",
+	.short_name		= "keyspan_1",
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= 3,
@@ -514,6 +516,7 @@ static struct usb_serial_device_type keyspan_1port_device = {
 static struct usb_serial_device_type keyspan_2port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan 2 port adapter",
+	.short_name		= "keyspan_2",
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -536,6 +539,7 @@ static struct usb_serial_device_type keyspan_2port_device = {
 static struct usb_serial_device_type keyspan_4port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan 4 port adapter",
+	.short_name		= "keyspan_4",
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= 5,

drivers/usb/serial/keyspan_pda.c

@@ -827,6 +827,7 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
 static struct usb_serial_device_type keyspan_pda_fake_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Keyspan PDA - (prerenumeration)",
+	.short_name =		"kyspn_pda_nofirm",
 	.id_table =		id_table_fake,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -840,6 +841,7 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
 static struct usb_serial_device_type xircom_pgs_fake_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Xircom / Entregra PGS - (prerenumeration)",
+	.short_name =		"xircom_nofirm",
 	.id_table =		id_table_fake_xircom,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -852,6 +854,7 @@ static struct usb_serial_device_type xircom_pgs_fake_device = {
 static struct usb_serial_device_type keyspan_pda_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Keyspan PDA",
+	.short_name =		"keyspan_pda",
 	.id_table =		id_table_std,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		0,

drivers/usb/serial/kl5kusb105.c

@@ -127,6 +127,7 @@ static struct usb_driver kl5kusb105d_driver = {
 static struct usb_serial_device_type kl5kusb105d_device = {
 	.owner =             THIS_MODULE,
 	.name =		     "KL5KUSB105D / PalmConnect",
+	.short_name =	     "kl5kusb105d",
 	.id_table =	     id_table,
 	.num_interrupt_in =  1,
 	.num_bulk_in =	     1,

drivers/usb/serial/mct_u232.c

@@ -149,6 +149,7 @@ static struct usb_driver mct_u232_driver = {
 static struct usb_serial_device_type mct_u232_device = {
 	.owner =	     THIS_MODULE,
 	.name =		     "Magic Control Technology USB-RS232",
+	.short_name =	     "mct_u232",
 	.id_table =	     id_table_combined,
 	.num_interrupt_in =  2,
 	.num_bulk_in =	     0,

drivers/usb/serial/omninet.c

@@ -94,6 +94,7 @@ static struct usb_driver omninet_driver = {
 static struct usb_serial_device_type zyxel_omninet_device = {
 	.owner =		THIS_MODULE,
 	.name =			"ZyXEL - omni.net lcd plus usb",
+	.short_name =		"omninet",
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/usb-serial.h

@@ -168,6 +168,9 @@ struct usb_serial {
  * @owner: pointer to the module that owns this device.
  * @name: pointer to a string that describes this device.  This string used
  *	in the syslog messages when a device is inserted or removed.
+ * @short_name: a pointer to a string that describes this device in
+ *	KOBJ_NAME_LEN characters or less.  This is used for the sysfs interface
+ *	to describe the driver.
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
  * @num_interrupt_in: the number of interrupt in endpoints this device will
@@ -201,6 +204,7 @@ struct usb_serial {
 struct usb_serial_device_type {
 	struct module *owner;
 	char	*name;
+	char	*short_name;
 	const struct usb_device_id *id_table;
 	char	num_interrupt_in;
 	char	num_bulk_in;

drivers/usb/serial/visor.c

@@ -236,6 +236,7 @@ static struct usb_driver visor_driver = {
 static struct usb_serial_device_type handspring_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Handspring Visor / Treo / Palm 4.0 / Clié 4.x",
+	.short_name =		"visor",
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		2,
@@ -262,6 +263,7 @@ static struct usb_serial_device_type handspring_device = {
 static struct usb_serial_device_type clie_3_5_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Sony Clié 3.5",
+	.short_name =		"clie_3.5",
 	.id_table =		clie_id_3_5_table,
 	.num_interrupt_in =	0,
 	.num_bulk_in =		1,

drivers/usb/serial/whiteheat.c

@@ -156,6 +156,7 @@ static void whiteheat_write_callback	(struct urb *urb, struct pt_regs *regs);
 static struct usb_serial_device_type whiteheat_fake_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Connect Tech - WhiteHEAT - (prerenumeration)",
+	.short_name =		"whiteheatnofirm",
 	.id_table =		id_table_prerenumeration,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -168,6 +169,7 @@ static struct usb_serial_device_type whiteheat_fake_device = {
 static struct usb_serial_device_type whiteheat_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Connect Tech - WhiteHEAT",
+	.short_name =		"whiteheat",
 	.id_table =		id_table_std,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -512,9 +514,11 @@ static int whiteheat_attach (struct usb_serial *serial)
 no_rx_buf:
 			usb_free_urb(urb);
 no_rx_urb:
+			;
 		}
 		kfree(info);
 no_private:
+		;
 	}
 	return -ENOMEM;
 }

drivers/usb/storage/transport.c

@@ -480,7 +480,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
 	status = usb_stor_msg_common(us);
 
 	/* return the actual length of the data transferred if no error */
-	if (status >= 0)
+	if (status == 0)
 		status = us->current_urb->actual_length;
 	return status;
 }
@@ -583,50 +583,52 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe,
 
 	US_DEBUGP("Status code %d; transferred %u/%u\n",
 			result, partial, length);
+	switch (result) {
 
-	/* stalled */
-	if (result == -EPIPE) {
+	/* no error code; did we send all the data? */
+	case 0:
+		if (partial != length) {
+			US_DEBUGP("-- short transfer\n");
+			return USB_STOR_XFER_SHORT;
+		}
+
+		US_DEBUGP("-- transfer complete\n");
+		return USB_STOR_XFER_GOOD;
 
-		/* for non-bulk (i.e., control) endpoints, a stall indicates
-		 * a protocol error */
-		if (!usb_pipebulk(pipe)) {
+	/* stalled */
+	case -EPIPE:
+		/* for control endpoints, a stall indicates a protocol error */
+		if (usb_pipecontrol(pipe)) {
 			US_DEBUGP("-- stall on control pipe\n");
 			return USB_STOR_XFER_ERROR;
 		}
 
-		/* for a bulk endpoint, clear the stall */
+		/* for other sorts of endpoint, clear the stall */
 		US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
 		if (usb_stor_clear_halt(us, pipe) < 0)
 			return USB_STOR_XFER_ERROR;
 		return USB_STOR_XFER_STALLED;
-	}
 
 	/* NAK - that means we've retried this a few times already */
-	if (result == -ETIMEDOUT) {
+	case -ETIMEDOUT:
 		US_DEBUGP("-- device NAKed\n");
 		return USB_STOR_XFER_ERROR;
-	}
 
 	/* the transfer was cancelled, presumably by an abort */
-	if (result == -ENODEV) {
+	case -ENODEV:
 		US_DEBUGP("-- transfer cancelled\n");
 		return USB_STOR_XFER_ERROR;
-	}
+
+	/* short scatter-gather read transfer */
+	case -EREMOTEIO:
+		US_DEBUGP("-- short read transfer\n");
+		return USB_STOR_XFER_SHORT;
 
 	/* the catch-all error case */
-	if (result < 0) {
+	default:
 		US_DEBUGP("-- unknown error\n");
 		return USB_STOR_XFER_ERROR;
 	}
-
-	/* no error code; did we send all the data? */
-	if (partial != length) {
-		US_DEBUGP("-- transferred only %u bytes\n", partial);
-		return USB_STOR_XFER_SHORT;
-	}
-
-	US_DEBUGP("-- transfer complete\n");
-	return USB_STOR_XFER_GOOD;
 }
 
 /*

drivers/usb/storage/usb.c

@@ -728,9 +728,13 @@ static int storage_probe(struct usb_interface *intf,
 			USB_ENDPOINT_NUMBER_MASK;
 		ss->ep_out = ep_out->bEndpointAddress & 
 			USB_ENDPOINT_NUMBER_MASK;
+		if (ep_int) {
 			ss->ep_int = ep_int->bEndpointAddress & 
 				USB_ENDPOINT_NUMBER_MASK;
 			ss->ep_bInterval = ep_int->bInterval;
+		}
+		else
+			ss->ep_int = ss->ep_bInterval = 0;
 
 		/* allocate the URB, the usb_ctrlrequest, and the IRQ URB */
 		if (usb_stor_allocate_urbs(ss))
@@ -771,9 +775,13 @@ static int storage_probe(struct usb_interface *intf,
 			USB_ENDPOINT_NUMBER_MASK;
 		ss->ep_out = ep_out->bEndpointAddress & 
 			USB_ENDPOINT_NUMBER_MASK;
+		if (ep_int) {
 			ss->ep_int = ep_int->bEndpointAddress & 
 				USB_ENDPOINT_NUMBER_MASK;
 			ss->ep_bInterval = ep_int->bInterval;
+		}
+		else
+			ss->ep_int = ss->ep_bInterval = 0;
 
 		/* establish the connection to the new device */
 		ss->ifnum = ifnum;