Commit c82f8d11 authored by Jes Sorensen's avatar Jes Sorensen Committed by Kalle Valo

rtl8xxxu: Move loading of AGC table to device specific function

This moves the loading of the AGC table into init_phy_bb() and reduces
the if() clutter.
Signed-off-by: default avatarJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent ade0dedd
......@@ -3756,6 +3756,11 @@ static void rtl8723au_init_phy_bb(struct rtl8xxxu_priv *priv)
if (priv->rtl_chip == RTL8188C && priv->hi_pa &&
priv->vendor_umc && priv->chip_cut == 1)
rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50);
if (priv->hi_pa)
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table);
else
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table);
}
static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv)
......@@ -3777,6 +3782,8 @@ static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv)
rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3);
rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80);
rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table);
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table);
}
static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv)
......@@ -3799,6 +3806,11 @@ static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv)
val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table);
if (priv->hi_pa)
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table);
else
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table);
}
/*
......@@ -3811,20 +3823,6 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
priv->fops->init_phy_bb(priv);
if (priv->rtl_chip == RTL8723B)
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table);
else if (priv->rtl_chip == RTL8192E) {
if (priv->hi_pa)
rtl8xxxu_init_phy_regs(priv,
rtl8xxx_agc_8192eu_highpa_table);
else
rtl8xxxu_init_phy_regs(priv,
rtl8xxx_agc_8192eu_std_table);
} else if (priv->hi_pa)
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table);
else
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table);
if (priv->tx_paths == 1 && priv->rx_paths == 2) {
/*
* For 1T2R boards, patch the registers.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment