Commit c8e6164f authored by Andrew Morton's avatar Andrew Morton Committed by Linus Torvalds

[PATCH] watchdog updates

From: Wim Van Sebroeck <wim@iguana.be>

<wim@iguana.be> (04/02/29 1.1628)
   [WATCHDOG] v2.6.3 pcwd_usb-watchdog

   Add the Berkshire Products USB-PC Watchdog driver

<wim@iguana.be> (04/02/29 1.1629)
   [WATCHDOG] v2.6.3 MODULE_*-patch

   Add MODULE_* info

<wim@iguana.be> (04/02/29 1.1630)
   [WATCHDOG/SPARC64] v2.6.3 Kconfig-WATCHDOG_CP1XXX/WATCHDOG_RIO-patch

   Move WATCHDOG_CP1XXX and WATCHDOG_RIO for SPARC64 architecture
   from arch/sparc64/Kconfig to drivers/char/watchdog/Kconfig
   and made them dependant of WATCHDOG also
parent 2955399d
......@@ -450,28 +450,6 @@ config DISPLAY7SEG
another UltraSPARC-IIi-cEngine boardset with a 7-segment display,
you should say N to this option.
config WATCHDOG_CP1XXX
tristate "CP1XXX Hardware Watchdog support"
depends on PCI
---help---
This is the driver for the hardware watchdog timers present on
Sun Microsystems CompactPCI models CP1400 and CP1500.
To compile this driver as a module, choose M here: the
module will be called cpwatchdog.
If you do not have a CompactPCI model CP1400 or CP1500, or
another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
you should say N to this option.
config WATCHDOG_RIO
tristate "RIO Hardware Watchdog support"
depends on PCI
help
Say Y here to support the hardware watchdog capability on Sun RIO
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
......
......@@ -339,6 +339,30 @@ config SH_WDT
To compile this driver as a module, choose M here: the
module will be called shwdt.
# SPARC64 Architecture
config WATCHDOG_CP1XXX
tristate "CP1XXX Hardware Watchdog support"
depends on WATCHDOG && SPARC64 && PCI
---help---
This is the driver for the hardware watchdog timers present on
Sun Microsystems CompactPCI models CP1400 and CP1500.
To compile this driver as a module, choose M here: the
module will be called cpwatchdog.
If you do not have a CompactPCI model CP1400 or CP1500, or
another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
you should say N to this option.
config WATCHDOG_RIO
tristate "RIO Hardware Watchdog support"
depends on WATCHDOG && SPARC64 && PCI
help
Say Y here to support the hardware watchdog capability on Sun RIO
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
#
# ISA-based Watchdog Cards
#
......@@ -455,4 +479,26 @@ config WDT_501_PCI
Fahrenheit. This works only if you have a WDT501P watchdog board
installed.
#
# USB-based Watchdog Cards
#
comment "USB-based Watchdog Cards"
depends on WATCHDOG && USB
config USBPCWATCHDOG
tristate "Berkshire Products USB-PC Watchdog"
depends on WATCHDOG && USB
---help---
This is the driver for the Berkshire Products USB-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
and if it does, it reboots your computer after a certain amount of
time. The card can also monitor the internal temperature of the PC.
More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
To compile this driver as a module, choose M here: the
module will be called pcwd_usb.
Most people will say N.
endmenu
#
# Makefile for the kernel character device drivers.
# Makefile for the WatchDog device drivers.
#
# Only one watchdog can succeed. We probe the hardware watchdog
......@@ -35,3 +35,4 @@ obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_AMD7XX_TCO) += amd7xx_tco.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
......@@ -293,6 +293,7 @@ MODULE_AUTHOR("Heiko Ronsdorf <hero@ihg.uni-duisburg.de>");
MODULE_DESCRIPTION("sma cpu5 watchdog driver");
MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_PARM(port, "i");
MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91");
......
......@@ -503,3 +503,4 @@ module_exit(eurwdt_exit);
MODULE_AUTHOR("Rodolfo Giometti");
MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -350,5 +350,6 @@ module_exit(ibwdt_exit);
MODULE_AUTHOR("Charles Howes <chowes@vsol.net>");
MODULE_DESCRIPTION("IB700 SBC watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/* end of ib700wdt.c */
......@@ -98,6 +98,7 @@ static unsigned short zf_readb(unsigned char port)
MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>");
MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
......
......@@ -302,4 +302,7 @@ static void __exit mixcomwd_exit(void)
module_init(mixcomwd_init);
module_exit(mixcomwd_exit);
MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>");
MODULE_DESCRIPTION("MixCom Watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -705,5 +705,8 @@ static void __exit pcwatchdog_exit(void)
module_init(pcwatchdog_init);
module_exit(pcwatchdog_exit);
MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>");
MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS_MISCDEV(TEMP_MINOR);
/*
* Berkshire USB-PC Watchdog Card Driver
*
* (c) Copyright 2004 Wim Van Sebroeck <wim@iguana.be>.
*
* Based on source code of the following authors:
* Ken Hollis <kenji@bitgate.com>,
* Alan Cox <alan@redhat.com>,
* Matt Domsch <Matt_Domsch@dell.com>,
* Rob Radez <rob@osinvestor.com>,
* Greg Kroah-Hartman <greg@kroah.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
* Thanks also to Simon Machell at Berkshire Products Inc. for
* providing the test hardware. More info is available at
* http://www.berkprod.com/ or http://www.pcwatchdog.com/
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/fs.h>
#include <linux/smp_lock.h>
#include <linux/completion.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#ifdef CONFIG_USB_DEBUG
static int debug = 1;
#else
static int debug;
#endif
/* Use our own dbg macro */
#undef dbg
#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG PFX format "\n" , ## arg); } while (0)
/* Module and Version Information */
#define DRIVER_VERSION "v1.00 (28/02/2004)"
#define DRIVER_AUTHOR "Wim Van Sebroeck <wim@iguana.be>"
#define DRIVER_DESC "Berkshire USB-PC Watchdog driver"
#define DRIVER_LICENSE "GPL"
#define DRIVER_NAME "pcwd_usb"
#define PFX DRIVER_NAME ": "
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS_MISCDEV(TEMP_MINOR);
/* Module Parameters */
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug enabled or not");
#define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */
static int heartbeat = WATCHDOG_HEARTBEAT;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
#else
static int nowayout = 0;
#endif
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
/* The vendor and product id's for the USB-PC Watchdog card */
#define USB_PCWD_VENDOR_ID 0x0c98
#define USB_PCWD_PRODUCT_ID 0x1140
/* table of devices that work with this driver */
static struct usb_device_id usb_pcwd_table [] = {
{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, usb_pcwd_table);
/* according to documentation max. time to process a command for the USB
* watchdog card is 100 or 200 ms, so we give it 250 ms to do it's job */
#define USB_COMMAND_TIMEOUT 250
/* Watchdog's internal commands */
#define CMD_READ_TEMP 0x02 /* Read Temperature; Re-trigger Watchdog */
#define CMD_TRIGGER CMD_READ_TEMP
#define CMD_GET_STATUS 0x04 /* Get Status Information */
#define CMD_GET_FIRMWARE_VERSION 0x08 /* Get Firmware Version */
#define CMD_GET_DIP_SWITCH_SETTINGS 0x0c /* Get Dip Switch Settings */
#define CMD_READ_WATCHDOG_TIMEOUT 0x18 /* Read Current Watchdog Time */
#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 /* Write Current Watchdog Time */
#define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */
#define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG
/* Some defines that I like to be somewhere else like include/linux/usb_hid.h */
#define HID_REQ_SET_REPORT 0x09
#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
/* We can only use 1 card due to the /dev/watchdog restriction */
static int cards_found;
/* some internal variables */
static unsigned long is_active;
static char expect_release;
/* Structure to hold all of our device specific stuff */
struct usb_pcwd_private {
struct usb_device * udev; /* save off the usb device pointer */
struct usb_interface * interface; /* the interface for this device */
unsigned int interface_number; /* the interface number used for cmd's */
unsigned char * intr_buffer; /* the buffer to intr data */
dma_addr_t intr_dma; /* the dma address for the intr buffer */
size_t intr_size; /* the size of the intr buffer */
struct urb * intr_urb; /* the urb used for the intr pipe */
unsigned char cmd_command; /* The command that is reported back */
unsigned char cmd_data_msb; /* The data MSB that is reported back */
unsigned char cmd_data_lsb; /* The data LSB that is reported back */
atomic_t cmd_received; /* true if we received a report after a command */
int exists; /* Wether or not the device exists */
struct semaphore sem; /* locks this structure */
};
static struct usb_pcwd_private *usb_pcwd_device;
/* prevent races between open() and disconnect() */
static DECLARE_MUTEX (disconnect_sem);
/* local function prototypes */
static int usb_pcwd_probe (struct usb_interface *interface, const struct usb_device_id *id);
static void usb_pcwd_disconnect (struct usb_interface *interface);
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver usb_pcwd_driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.probe = usb_pcwd_probe,
.disconnect = usb_pcwd_disconnect,
.id_table = usb_pcwd_table,
};
static void usb_pcwd_intr_done(struct urb *urb, struct pt_regs *regs)
{
struct usb_pcwd_private *usb_pcwd = (struct usb_pcwd_private *)urb->context;
unsigned char *data = usb_pcwd->intr_buffer;
int retval;
switch (urb->status) {
case 0: /* success */
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
return;
/* -EPIPE: should clear the halt */
default: /* error */
dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
goto resubmit;
}
dbg("received following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
data[0], data[1], data[2]);
usb_pcwd->cmd_command = data[0];
usb_pcwd->cmd_data_msb = data[1];
usb_pcwd->cmd_data_lsb = data[2];
/* notify anyone waiting that the cmd has finished */
atomic_set (&usb_pcwd->cmd_received, 1);
resubmit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n",
retval);
}
static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned char cmd,
unsigned char *msb, unsigned char *lsb)
{
int got_response, count;
unsigned char buf[6];
/* We will not send any commands if the USB PCWD device does not exist */
if ((!usb_pcwd) || (!usb_pcwd->exists))
return -1;
/* The USB PC Watchdog uses a 6 byte report format. The board currently uses
* only 3 of the six bytes of the report. */
buf[0] = cmd; /* Byte 0 = CMD */
buf[1] = *msb; /* Byte 1 = Data MSB */
buf[2] = *lsb; /* Byte 2 = Data LSB */
buf[3] = buf[4] = buf[5] = 0; /* All other bytes not used */
dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
buf[0], buf[1], buf[2]);
atomic_set (&usb_pcwd->cmd_received, 0);
if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0),
HID_REQ_SET_REPORT, HID_DT_REPORT,
0x0200, usb_pcwd->interface_number, buf, sizeof(buf),
HZ) != sizeof(buf)) {
dbg("usb_pcwd_send_command: error in usb_control_msg for cmd 0x%x 0x%x 0x%x\n", cmd, *msb, *lsb);
}
/* wait till the usb card processed the command,
* with a max. timeout of USB_COMMAND_TIMEOUT */
got_response = 0;
for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) {
mdelay(1);
if (atomic_read (&usb_pcwd->cmd_received))
got_response = 1;
}
if ((got_response) && (cmd == usb_pcwd->cmd_command)) {
/* read back response */
*msb = usb_pcwd->cmd_data_msb;
*lsb = usb_pcwd->cmd_data_lsb;
}
return got_response;
}
static int usb_pcwd_start(struct usb_pcwd_private *usb_pcwd)
{
unsigned char msb = 0x00;
unsigned char lsb = 0x00;
int retval;
/* Enable Watchdog */
retval = usb_pcwd_send_command(usb_pcwd, CMD_ENABLE_WATCHDOG, &msb, &lsb);
if ((retval == 0) || (lsb == 0)) {
printk(KERN_ERR PFX "Card did not acknowledge enable attempt\n");
return -1;
}
return 0;
}
static int usb_pcwd_stop(struct usb_pcwd_private *usb_pcwd)
{
unsigned char msb = 0xA5;
unsigned char lsb = 0xC3;
int retval;
/* Disable Watchdog */
retval = usb_pcwd_send_command(usb_pcwd, CMD_DISABLE_WATCHDOG, &msb, &lsb);
if ((retval == 0) || (lsb != 0)) {
printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n");
return -1;
}
return 0;
}
static int usb_pcwd_keepalive(struct usb_pcwd_private *usb_pcwd)
{
unsigned char dummy;
/* Re-trigger Watchdog */
usb_pcwd_send_command(usb_pcwd, CMD_TRIGGER, &dummy, &dummy);
return 0;
}
static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t)
{
unsigned char msb = t / 256;
unsigned char lsb = t % 256;
if ((t < 0x0001) || (t > 0xFFFF))
return -EINVAL;
/* Write new heartbeat to watchdog */
usb_pcwd_send_command(usb_pcwd, CMD_WRITE_WATCHDOG_TIMEOUT, &msb, &lsb);
heartbeat = t;
return 0;
}
static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, int *temperature)
{
unsigned char msb, lsb;
usb_pcwd_send_command(usb_pcwd, CMD_READ_TEMP, &msb, &lsb);
/*
* Convert celsius to fahrenheit, since this was
* the decided 'standard' for this return value.
*/
*temperature = (lsb * 9 / 5) + 32;
return 0;
}
/*
* /dev/watchdog handling
*/
static ssize_t usb_pcwd_write(struct file *file, const char *data,
size_t len, loff_t *ppos)
{
/* Can't seek (pwrite) on this device */
if (ppos != &file->f_pos)
return -ESPIPE;
/* See if we got the magic character 'V' and reload the timer */
if (len) {
if (!nowayout) {
size_t i;
/* note: just in case someone wrote the magic character
* five months ago... */
expect_release = 0;
/* scan to see whether or not we got the magic character */
for (i = 0; i != len; i++) {
char c;
if(get_user(c, data+i))
return -EFAULT;
if (c == 'V')
expect_release = 42;
}
}
/* someone wrote to us, we should reload the timer */
usb_pcwd_keepalive(usb_pcwd_device);
}
return len;
}
static int usb_pcwd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = DRIVER_NAME,
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user((struct watchdog_info *) arg, &ident,
sizeof (ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, (int *) arg);
case WDIOC_GETTEMP:
{
int temperature;
if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
return -EFAULT;
return put_user(temperature, (int *) arg);
}
case WDIOC_KEEPALIVE:
usb_pcwd_keepalive(usb_pcwd_device);
return 0;
case WDIOC_SETOPTIONS:
{
int new_options, retval = -EINVAL;
if (get_user (new_options, (int *) arg))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
usb_pcwd_stop(usb_pcwd_device);
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
usb_pcwd_start(usb_pcwd_device);
retval = 0;
}
return retval;
}
case WDIOC_SETTIMEOUT:
{
int new_heartbeat;
if (get_user(new_heartbeat, (int *) arg))
return -EFAULT;
if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
return -EINVAL;
usb_pcwd_keepalive(usb_pcwd_device);
/* Fall */
}
case WDIOC_GETTIMEOUT:
return put_user(heartbeat, (int *)arg);
default:
return -ENOIOCTLCMD;
}
}
static int usb_pcwd_open(struct inode *inode, struct file *file)
{
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &is_active))
return -EBUSY;
/* Activate */
usb_pcwd_start(usb_pcwd_device);
usb_pcwd_keepalive(usb_pcwd_device);
return 0;
}
static int usb_pcwd_release(struct inode *inode, struct file *file)
{
/*
* Shut off the timer.
*/
if (expect_release == 42) {
usb_pcwd_stop(usb_pcwd_device);
} else {
printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
usb_pcwd_keepalive(usb_pcwd_device);
}
clear_bit(0, &is_active);
expect_release = 0;
return 0;
}
/*
* /dev/temperature handling
*/
static ssize_t usb_pcwd_temperature_read(struct file *file, char *data,
size_t len, loff_t *ppos)
{
int temperature;
/* Can't seek (pwrite) on this device */
if (ppos != &file->f_pos)
return -ESPIPE;
if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
return -EFAULT;
if (copy_to_user (data, &temperature, 1))
return -EFAULT;
return 1;
}
static int usb_pcwd_temperature_open(struct inode *inode, struct file *file)
{
return 0;
}
static int usb_pcwd_temperature_release(struct inode *inode, struct file *file)
{
return 0;
}
/*
* Notify system
*/
static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
{
if (code==SYS_DOWN || code==SYS_HALT) {
/* Turn the WDT off */
usb_pcwd_stop(usb_pcwd_device);
}
return NOTIFY_DONE;
}
/*
* Kernel Interfaces
*/
static struct file_operations usb_pcwd_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = usb_pcwd_write,
.ioctl = usb_pcwd_ioctl,
.open = usb_pcwd_open,
.release = usb_pcwd_release,
};
static struct miscdevice usb_pcwd_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &usb_pcwd_fops,
};
static struct file_operations usb_pcwd_temperature_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = usb_pcwd_temperature_read,
.open = usb_pcwd_temperature_open,
.release = usb_pcwd_temperature_release,
};
static struct miscdevice usb_pcwd_temperature_miscdev = {
.minor = TEMP_MINOR,
.name = "temperature",
.fops = &usb_pcwd_temperature_fops,
};
static struct notifier_block usb_pcwd_notifier = {
.notifier_call = usb_pcwd_notify_sys,
};
/**
* usb_pcwd_delete
*/
static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd)
{
if (usb_pcwd->intr_urb != NULL)
usb_free_urb (usb_pcwd->intr_urb);
if (usb_pcwd->intr_buffer != NULL)
usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size,
usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
kfree (usb_pcwd);
}
/**
* usb_pcwd_probe
*
* Called by the usb core when a new device is connected that it thinks
* this driver might be interested in.
*/
static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
struct usb_pcwd_private *usb_pcwd = NULL;
int pipe, maxp;
int retval = -ENOMEM;
int got_fw_rev;
unsigned char fw_rev_major, fw_rev_minor;
char fw_ver_str[20];
unsigned char option_switches, dummy;
/* See if the device offered us matches what we can accept */
if ((udev->descriptor.idVendor != USB_PCWD_VENDOR_ID) ||
(udev->descriptor.idProduct != USB_PCWD_PRODUCT_ID)) {
return -ENODEV;
}
cards_found++;
if (cards_found > 1) {
printk(KERN_ERR PFX "This driver only supports 1 device\n");
return -ENODEV;
}
/* get the active interface descriptor */
iface_desc = &interface->altsetting[interface->act_altsetting];
/* check out that we have a HID device */
if (!(iface_desc->desc.bInterfaceClass == USB_CLASS_HID)) {
printk(KERN_ERR PFX "The device isn't a Human Interface Device\n");
return -ENODEV;
}
/* check out the endpoint: it has to be Interrupt & IN */
endpoint = &iface_desc->endpoint[0].desc;
if (!((endpoint->bEndpointAddress & USB_DIR_IN) &&
((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_INT))) {
/* we didn't find a Interrupt endpoint with direction IN */
printk(KERN_ERR PFX "Couldn't find an INTR & IN endpoint\n");
return -ENODEV;
}
/* get a handle to the interrupt data pipe */
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
/* allocate memory for our device and initialize it */
usb_pcwd = kmalloc (sizeof(struct usb_pcwd_private), GFP_KERNEL);
if (usb_pcwd == NULL) {
printk(KERN_ERR PFX "Out of memory\n");
goto error;
}
memset (usb_pcwd, 0x00, sizeof (*usb_pcwd));
usb_pcwd_device = usb_pcwd;
init_MUTEX (&usb_pcwd->sem);
usb_pcwd->udev = udev;
usb_pcwd->interface = interface;
usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber;
usb_pcwd->intr_size = (endpoint->wMaxPacketSize > 8 ? endpoint->wMaxPacketSize : 8);
/* set up the memory buffer's */
if (!(usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, SLAB_ATOMIC, &usb_pcwd->intr_dma))) {
printk(KERN_ERR PFX "Out of memory\n");
goto error;
}
/* allocate the urb's */
usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!usb_pcwd->intr_urb) {
printk(KERN_ERR PFX "Out of memory\n");
goto error;
}
/* initialise the intr urb's */
usb_fill_int_urb(usb_pcwd->intr_urb, udev, pipe,
usb_pcwd->intr_buffer, usb_pcwd->intr_size,
usb_pcwd_intr_done, usb_pcwd, endpoint->bInterval);
usb_pcwd->intr_urb->transfer_dma = usb_pcwd->intr_dma;
usb_pcwd->intr_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* register our interrupt URB with the USB system */
if (usb_submit_urb(usb_pcwd->intr_urb, GFP_KERNEL)) {
printk(KERN_ERR PFX "Problem registering interrupt URB\n");
retval = -EIO; /* failure */
goto error;
}
/* The device exists and can be communicated with */
usb_pcwd->exists = 1;
/* disable card */
usb_pcwd_stop(usb_pcwd);
/* Get the Firmware Version */
got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
if (got_fw_rev) {
sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
} else {
sprintf(fw_ver_str, "<card no answer>");
}
printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n",
fw_ver_str);
/* Get switch settings */
usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy, &option_switches);
printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
option_switches,
((option_switches & 0x10) ? "ON" : "OFF"),
((option_switches & 0x08) ? "ON" : "OFF"));
/* Check that the heartbeat value is within it's range ; if not reset to the default */
if (heartbeat < 1 || heartbeat > 0xFFFF) {
heartbeat = WATCHDOG_HEARTBEAT;
printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
heartbeat);
}
/* Calculate the watchdog's heartbeat */
usb_pcwd_set_heartbeat(usb_pcwd, heartbeat);
retval = register_reboot_notifier(&usb_pcwd_notifier);
if (retval != 0) {
printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
retval);
goto error;
}
retval = misc_register(&usb_pcwd_miscdev);
if (retval != 0) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, retval);
goto err_out_unregister_reboot;
}
retval = misc_register(&usb_pcwd_temperature_miscdev);
if (retval != 0) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, retval);
goto err_out_misc_deregister;
}
/* we can register the device now, as it is ready */
usb_set_intfdata (interface, usb_pcwd);
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
return 0;
err_out_misc_deregister:
misc_deregister(&usb_pcwd_miscdev);
err_out_unregister_reboot:
unregister_reboot_notifier(&usb_pcwd_notifier);
error:
usb_pcwd_delete (usb_pcwd);
usb_pcwd_device = NULL;
return retval;
}
/**
* usb_pcwd_disconnect
*
* Called by the usb core when the device is removed from the system.
*
* This routine guarantees that the driver will not submit any more urbs
* by clearing dev->udev.
*/
static void usb_pcwd_disconnect(struct usb_interface *interface)
{
struct usb_pcwd_private *usb_pcwd;
/* prevent races with open() */
down (&disconnect_sem);
usb_pcwd = usb_get_intfdata (interface);
usb_set_intfdata (interface, NULL);
down (&usb_pcwd->sem);
/* Stop the timer before we leave */
if (!nowayout)
usb_pcwd_stop(usb_pcwd);
/* We should now stop communicating with the USB PCWD device */
usb_pcwd->exists = 0;
/* Deregister */
misc_deregister(&usb_pcwd_temperature_miscdev);
misc_deregister(&usb_pcwd_miscdev);
unregister_reboot_notifier(&usb_pcwd_notifier);
up (&usb_pcwd->sem);
/* Delete the USB PCWD device */
usb_pcwd_delete(usb_pcwd);
cards_found--;
up (&disconnect_sem);
printk(KERN_INFO PFX "USB PC Watchdog disconnected\n");
}
/**
* usb_pcwd_init
*/
static int __init usb_pcwd_init(void)
{
int result;
/* register this driver with the USB subsystem */
result = usb_register(&usb_pcwd_driver);
if (result) {
printk(KERN_ERR PFX "usb_register failed. Error number %d\n",
result);
return result;
}
printk(KERN_INFO PFX DRIVER_DESC " " DRIVER_VERSION "\n");
return 0;
}
/**
* usb_pcwd_exit
*/
static void __exit usb_pcwd_exit(void)
{
/* deregister this driver with the USB subsystem */
usb_deregister(&usb_pcwd_driver);
}
module_init (usb_pcwd_init);
module_exit (usb_pcwd_exit);
......@@ -218,3 +218,4 @@ module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -486,3 +486,4 @@ module_exit(sc1200wdt_exit);
MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
MODULE_DESCRIPTION("Driver for National Semiconductor PC87307/PC97307 watchdog component");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -321,4 +321,4 @@ module_exit(wdt_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pdraig Brady <P@draigBrady.com>");
MODULE_DESCRIPTION("w38627hf WDT driver");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -427,3 +427,4 @@ module_exit(w83877f_wdt_unload);
MODULE_AUTHOR("Scott and Bill Jennings");
MODULE_DESCRIPTION("Driver for watchdog timer in w83877f chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -222,6 +222,7 @@ static void __exit footbridge_watchdog_exit(void)
MODULE_AUTHOR("Phil Blundell <pb@nexus.co.uk>");
MODULE_DESCRIPTION("Footbridge watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
module_param(soft_margin, int, 0);
MODULE_PARM_DESC(soft_margin,"Watchdog timeout in seconds");
......
......@@ -365,5 +365,7 @@ static void __exit nwwatchdog_exit(void)
module_init(nwwatchdog_init);
module_exit(nwwatchdog_exit);
MODULE_AUTHOR("Woody Suwalski <woody@netwinder.org>");
MODULE_DESCRIPTION("W83977AF Watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -653,3 +653,5 @@ module_exit(wdtpci_cleanup);
MODULE_AUTHOR("JP Nollmann, Alan Cox");
MODULE_DESCRIPTION("Driver for the ICS PCI watchdog cards");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS_MISCDEV(TEMP_MINOR);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment