Commit c8fb7948 authored by Arnaldo Carvalho de Melo's avatar Arnaldo Carvalho de Melo Committed by David S. Miller

[TR]: Make tr_type_trans set skb->dev

Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c1a4b86e
......@@ -933,8 +933,6 @@ static void xl_rx(struct net_device *dev)
return ;
}
skb->dev = dev ;
while (xl_priv->rx_ring_tail != temp_ring_loc) {
copy_len = xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen & 0x7FFF ;
frame_length -= copy_len ;
......@@ -967,8 +965,6 @@ static void xl_rx(struct net_device *dev)
return ;
}
skb->dev = dev ;
skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ;
pci_unmap_single(xl_priv->pdev, xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr, xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
skb_put(skb2, frame_length) ;
......
......@@ -1771,7 +1771,6 @@ static void tr_rx(struct net_device *dev)
/*BMS again, if she comes in with few but leaves with many */
skb_reserve(skb, sizeof(struct trh_hdr) - lan_hdr_len);
skb_put(skb, length);
skb->dev = dev;
data = skb->data;
rbuffer_len = ntohs(readw(rbuf + offsetof(struct rec_buf, buf_len)));
rbufdata = rbuf + offsetof(struct rec_buf, data);
......
......@@ -944,8 +944,6 @@ static void streamer_rx(struct net_device *dev)
printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n", dev->name);
streamer_priv->streamer_stats.rx_dropped++;
} else { /* we allocated an skb OK */
skb->dev = dev;
if (buffer_cnt == 1) {
/* release the DMA mapping */
pci_unmap_single(streamer_priv->pci_dev,
......@@ -1607,7 +1605,6 @@ static void streamer_arb_cmd(struct net_device *dev)
frame_data, buffer_len);
} while (next_ptr && (buff_off = next_ptr));
mac_frame->dev = dev;
mac_frame->protocol = tr_type_trans(mac_frame, dev);
#if STREAMER_NETWORK_MONITOR
printk(KERN_WARNING "%s: Received MAC Frame, details: \n",
......
......@@ -814,8 +814,6 @@ static void olympic_rx(struct net_device *dev)
olympic_priv->rx_ring_last_received += i ;
olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;
} else {
skb->dev = dev ;
/* Optimise based upon number of buffers used.
If only one buffer is used we can simply swap the buffers around.
If more than one then we must use the new buffer and copy the information
......@@ -1440,7 +1438,6 @@ static void olympic_arb_cmd(struct net_device *dev)
next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next));
} while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr)));
mac_frame->dev = dev;
mac_frame->protocol = tr_type_trans(mac_frame, dev);
if (olympic_priv->olympic_network_monitor) {
......
......@@ -3896,7 +3896,6 @@ static int smctr_process_rx_packet(MAC_HEADER *rmf, __u16 size,
tp->MacStat.rx_bytes += skb->len;
/* Kick the packet on up. */
skb->dev = dev;
skb->protocol = tr_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
......@@ -4483,7 +4482,6 @@ static int smctr_rx_frame(struct net_device *dev)
tp->MacStat.rx_bytes += skb->len;
/* Kick the packet on up. */
skb->dev = dev;
skb->protocol = tr_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
......
......@@ -2168,7 +2168,6 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
}
else
{
skb->dev = dev;
skb_put(skb, tp->MaxPacketSize);
rpl->SkbStat = SKB_DATA_COPY;
ReceiveDataPtr = rpl->MData;
......
......@@ -193,6 +193,7 @@ __be16 tr_type_trans(struct sk_buff *skb, struct net_device *dev)
struct trllc *trllc;
unsigned riflen=0;
skb->dev = dev;
skb->mac.raw = skb->data;
trh = tr_hdr(skb);
......
......@@ -825,14 +825,16 @@ static void lec_push(struct atm_vcc *vcc, struct sk_buff *skb)
if (!hlist_empty(&priv->lec_arp_empty_ones)) {
lec_arp_check_empties(priv, vcc, skb);
}
skb->dev = dev;
skb_pull(skb, 2); /* skip lec_id */
#ifdef CONFIG_TR
if (priv->is_trdev)
skb->protocol = tr_type_trans(skb, dev);
else
#endif
{
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
}
priv->stats.rx_packets++;
priv->stats.rx_bytes += skb->len;
memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment