Merge tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu into next/dt64

mvebu dt64 for 4.14 (part 4)

Adding more resources on the network controller ppv2.2 on Armada 7K/8K
allowing to use last improvement introduced in the driver.

Also enabling more network ports on the mcbin (A8K base board)

* tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts

@@ -202,6 +202,30 @@ cpm_sdhci_pins: sdhci-pins {
 	};
 };
 
+&cpm_xmdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+
+	phy8: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cpm_ethernet {
+	status = "okay";
+};
+
+&cpm_eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "10gbase-kr";
+};
+
 &cpm_sata0 {
 	/* CPM Lane 0 - U29 */
 	status = "okay";
@@ -231,6 +255,12 @@ &cps_ethernet {
 	status = "okay";
 };
 
+&cps_eth0 {
+	status = "okay";
+	phy = <&phy8>;
+	phy-mode = "10gbase-kr";
+};
+
 &cps_eth1 {
 	/* CPS Lane 0 - J5 (Gigabit RJ45) */
 	status = "okay";

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -65,25 +65,44 @@ cpm_ethernet: ethernet@0 {
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
 				clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				marvell,system-controller = <&cpm_syscon0>;
 				status = "disabled";
 				dma-coherent;
 
 				cpm_eth0: eth0 {
-					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
 				};
 
 				cpm_eth1: eth1 {
-					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
 				};
 
 				cpm_eth2: eth2 {
-					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -65,25 +65,44 @@ cps_ethernet: ethernet@0 {
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
 				clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				marvell,system-controller = <&cps_syscon0>;
 				status = "disabled";
 				dma-coherent;
 
 				cps_eth0: eth0 {
-					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
 				};
 
 				cps_eth1: eth1 {
-					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
 				};
 
 				cps_eth2: eth2 {
-					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";