Merge tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - sbs-charger driver
   - max14656_charger_detector
   - axp20x_ac_power

  New chip/feature support"
   - axp20x_usb_power: add AXP223 support
   - tps65217: add usb charger support
   - qcom_smbb: support otg regulator
   - at91-reset: add samx7 support

  Dropped drivers:
   - intel_mid_battery (platform was dropped)

  Fixes:
   - at91-poweroff: avoid wearing off LPDDR memory
   - replace deprecated extcon API
   - lots of cleanup and style fixes
   - misc minor functionality fixes"

* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
  power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  power: supply: axp20x_usb_power: use IIO channels when available
  power: supply: max14656: Export I2C and OF device ID as module aliases
  power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
  power: supply: bq24190_charger: Adjust formatting
  power: supply: bq24190_charger: Handle fault before status on interrupt
  power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
  power: supply: bq24190_charger: Call power_supply_changed() for relevant component
  power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
  power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
  power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
  power: supply: qcom_smbb: add regulator dependency
  power: reset: at91-reset: remove leftover platform_device_id
  power: reset: at91-reset: add samx7 support
  power: supply: max14656: fix platform_no_drv_owner.cocci warnings
  power: supply: pcf50633-charger: Compress return logic into one line.
  power: supply: ab8500_btemp: Compress return logic into one line.
  power: reset: at91-poweroff: timely shutdown LPDDR memories
  ARM: at91: define LPDDR types
  ...

Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt

+AXP20X and AXP22X PMICs' AC power supply
+
+Required Properties:
+ - compatible: One of:
+			"x-powers,axp202-ac-power-supply"
+			"x-powers,axp221-ac-power-supply"
+
+This node is a subnode of the axp20x PMIC.
+
+The AXP20X can read the current current and voltage supplied by AC by
+reading ADC channels from the AXP20X ADC.
+
+The AXP22X is only able to tell if an AC power supply is present and
+usable.
+
+Example:
+
+&axp209 {
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+	};
+};

Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt

@@ -3,6 +3,11 @@ AXP20x USB power supply
 Required Properties:
 -compatible: One of: "x-powers,axp202-usb-power-supply"
                      "x-powers,axp221-usb-power-supply"
+                     "x-powers,axp223-usb-power-supply"
+
+The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+variations such as the former being able to set the VBUS power supply max
+current to 100mA, unlike the latter.
 
 This node is a subnode of the axp20x PMIC.
 

Documentation/devicetree/bindings/power/supply/bq27xxx.txt

+Binding for TI BQ27XXX fuel gauge family
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq27200" - BQ27200
+ * "ti,bq27210" - BQ27210
+ * "ti,bq27500" - deprecated, use revision specific property below
+ * "ti,bq27510" - deprecated, use revision specific property below
+ * "ti,bq27520" - deprecated, use revision specific property below
+ * "ti,bq27500-1" - BQ27500/1
+ * "ti,bq27510g1" - BQ27510-g1
+ * "ti,bq27510g2" - BQ27510-g2
+ * "ti,bq27510g3" - BQ27510-g3
+ * "ti,bq27520g1" - BQ27520-g1
+ * "ti,bq27520g2" - BQ27520-g2
+ * "ti,bq27520g3" - BQ27520-g3
+ * "ti,bq27520g4" - BQ27520-g4
+ * "ti,bq27530" - BQ27530
+ * "ti,bq27531" - BQ27531
+ * "ti,bq27541" - BQ27541
+ * "ti,bq27542" - BQ27542
+ * "ti,bq27546" - BQ27546
+ * "ti,bq27742" - BQ27742
+ * "ti,bq27545" - BQ27545
+ * "ti,bq27421" - BQ27421
+ * "ti,bq27425" - BQ27425
+ * "ti,bq27441" - BQ27441
+ * "ti,bq27621" - BQ27621
+- reg: integer, i2c address of the device.
+
+Example:
+
+bq27510g3 {
+    compatible = "ti,bq27510g3";
+    reg = <0x55>;
+};

Documentation/devicetree/bindings/power/supply/qcom_smbb.txt

@@ -105,6 +105,22 @@ PROPERTIES
                regulation must be done externally to fully comply with
                the JEITA safety guidelines if this flag is set.
 
+- usb_otg_in-supply:
+  Usage: optional
+  Value type: <phandle>
+  Description: Reference to the regulator supplying power to the USB_OTG_IN
+               pin.
+
+child nodes:
+- otg-vbus:
+  Usage: optional
+  Description: This node defines a regulator used to control the direction
+               of VBUS voltage - specifically: whether to supply voltage
+               to VBUS for host mode operation of the OTG port, or allow
+               input voltage from external VBUS for charging.  In the
+               hardware, the supply for this regulator comes from
+               usb_otg_in-supply.
+
 EXAMPLE
 charger@1000 {
        compatible = "qcom,pm8941-charger";
@@ -128,4 +144,7 @@ charger@1000 {
 
        qcom,fast-charge-current-limit = <1000000>;
        qcom,dc-charge-current-limit = <1000000>;
+       usb_otg_in-supply = <&pm8941_5vs1>;
+
+       otg-vbus {};
 };

Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt

+SBS sbs-charger
+~~~~~~~~~~
+
+Required properties:
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
+     number compatible string might be used in order to take care of vendor
+     specific registers.
+
+Optional properties:
+- interrupt-parent: Should be the phandle for the interrupt controller. Use in
+    conjunction with "interrupts".
+- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
+    "interrupt-parent". If an interrupt is not provided the driver will switch
+    automatically to polling.
+
+Example:
+
+	ltc4100@9 {
+		compatible = "lltc,ltc4100", "sbs,sbs-charger";
+		reg = <0x9>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};

Documentation/devicetree/bindings/power/supply/ti,bq24735.txt

@@ -8,8 +8,10 @@ Optional properties :
  - interrupts : Specify the interrupt to be used to trigger when the AC
    adapter is either plugged in or removed.
  - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
-   presence. This is a Host GPIO that is configured as an input and
-   connected to the bq24735.
+   status. This is a Host GPIO that is configured as an input and connected
+   to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
+   the GPIO must be active on AC adapter absence despite ACOK being active
+   (high) on AC adapter presence.
  - ti,charge-current : Used to control and set the charging current. This value
    must be between 128mA and 8.128A with a 64mA step resolution. The POR value
    is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
@@ -25,6 +27,8 @@ Optional properties :
  - ti,external-control : Indicates that the charger is configured externally
    and that the host should not attempt to enable/disable charging or set the
    charge voltage/current.
+ - poll-interval : In case 'interrupts' is not specified, poll AC adapter
+   presence with this interval (milliseconds).
 
 Example:
 

Documentation/devicetree/bindings/power_supply/maxim,max14656.txt

+Maxim MAX14656 / AL32 USB Charger Detector
+
+Required properties :
+- compatible : "maxim,max14656";
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: interrupt line
+
+Example:
+
+&i2c2 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	max14656@35 {
+		compatible = "maxim,max14656";
+		reg = <0x35>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger_detect>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

drivers/power/reset/Kconfig

@@ -32,7 +32,7 @@ config POWER_RESET_AT91_RESET
 
 config POWER_RESET_AT91_SAMA5D2_SHDWC
 	tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
-	depends on ARCH_AT91 || COMPILE_TEST
+	depends on ARCH_AT91
 	default SOC_SAMA5
 	help
 	  This driver supports the alternate shutdown controller for some Atmel

drivers/power/reset/at91-poweroff.c

@@ -14,9 +14,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/printk.h>
 
+#include <soc/at91/at91sam9_ddrsdr.h>
+
 #define AT91_SHDW_CR	0x00		/* Shut Down Control Register */
 #define AT91_SHDW_SHDW		BIT(0)			/* Shut Down command */
 #define AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
@@ -50,6 +53,7 @@ static const char *shdwc_wakeup_modes[] = {
 
 static void __iomem *at91_shdwc_base;
 static struct clk *sclk;
+static void __iomem *mpddrc_base;
 
 static void __init at91_wakeup_status(void)
 {
@@ -73,6 +77,29 @@ static void at91_poweroff(void)
 	writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR);
 }
 
+static void at91_lpddr_poweroff(void)
+{
+	asm volatile(
+		/* Align to cache lines */
+		".balign 32\n\t"
+
+		/* Ensure AT91_SHDW_CR is in the TLB by reading it */
+		"	ldr	r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+		/* Power down SDRAM0 */
+		"	str	%1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+		/* Shutdown CPU */
+		"	str	%3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+		"	b	.\n\t"
+		:
+		: "r" (mpddrc_base),
+		  "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+		  "r" (at91_shdwc_base),
+		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+		: "r0");
+}
+
 static int at91_poweroff_get_wakeup_mode(struct device_node *np)
 {
 	const char *pm;
@@ -124,6 +151,8 @@ static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
 static int __init at91_poweroff_probe(struct platform_device *pdev)
 {
 	struct resource *res;
+	struct device_node *np;
+	u32 ddr_type;
 	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -150,12 +179,30 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
 
 	pm_power_off = at91_poweroff;
 
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+	if (!np)
+		return 0;
+
+	mpddrc_base = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!mpddrc_base)
+		return 0;
+
+	ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
+	if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
+	    (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
+		pm_power_off = at91_lpddr_poweroff;
+	else
+		iounmap(mpddrc_base);
+
 	return 0;
 }
 
 static int __exit at91_poweroff_remove(struct platform_device *pdev)
 {
-	if (pm_power_off == at91_poweroff)
+	if (pm_power_off == at91_poweroff ||
+	    pm_power_off == at91_lpddr_poweroff)
 		pm_power_off = NULL;
 
 	clk_disable_unprepare(sclk);
@@ -163,6 +210,11 @@ static int __exit at91_poweroff_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id at91_ramc_of_match[] = {
+	{ .compatible = "atmel,sama5d3-ddramc", },
+	{ /* sentinel */ }
+};
+
 static const struct of_device_id at91_poweroff_of_match[] = {
 	{ .compatible = "atmel,at91sam9260-shdwc", },
 	{ .compatible = "atmel,at91sam9rl-shdwc", },

drivers/power/reset/at91-reset.c

@@ -134,6 +134,15 @@ static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
 	return NOTIFY_DONE;
 }
 
+static int samx7_restart(struct notifier_block *this, unsigned long mode,
+			 void *cmd)
+{
+	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST),
+	       at91_rstc_base);
+
+	return NOTIFY_DONE;
+}
+
 static void __init at91_reset_status(struct platform_device *pdev)
 {
 	u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
@@ -173,6 +182,7 @@ static const struct of_device_id at91_reset_of_match[] = {
 	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
 	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
 	{ .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
+	{ .compatible = "atmel,samx7-rstc", .data = samx7_restart },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, at91_reset_of_match);
@@ -238,20 +248,12 @@ static int __exit at91_reset_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id at91_reset_plat_match[] = {
-	{ "at91-sam9260-reset", (unsigned long)at91sam9260_restart },
-	{ "at91-sam9g45-reset", (unsigned long)at91sam9g45_restart },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(platform, at91_reset_plat_match);
-
 static struct platform_driver at91_reset_driver = {
 	.remove = __exit_p(at91_reset_remove),
 	.driver = {
 		.name = "at91-reset",
 		.of_match_table = at91_reset_of_match,
 	},
-	.id_table = at91_reset_plat_match,
 };
 module_platform_driver_probe(at91_reset_driver, at91_reset_probe);
 

drivers/power/reset/at91-sama5d2_shdwc.c

@@ -22,9 +22,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/printk.h>
 
+#include <soc/at91/at91sam9_ddrsdr.h>
+
 #define SLOW_CLOCK_FREQ	32768
 
 #define AT91_SHDW_CR	0x00		/* Shut Down Control Register */
@@ -75,6 +78,7 @@ struct shdwc {
  */
 static struct shdwc *at91_shdwc;
 static struct clk *sclk;
+static void __iomem *mpddrc_base;
 
 static const unsigned long long sdwc_dbc_period[] = {
 	0, 3, 32, 512, 4096, 32768,
@@ -108,6 +112,29 @@ static void at91_poweroff(void)
 	       at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
 }
 
+static void at91_lpddr_poweroff(void)
+{
+	asm volatile(
+		/* Align to cache lines */
+		".balign 32\n\t"
+
+		/* Ensure AT91_SHDW_CR is in the TLB by reading it */
+		"	ldr	r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+		/* Power down SDRAM0 */
+		"	str	%1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+		/* Shutdown CPU */
+		"	str	%3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+		"	b	.\n\t"
+		:
+		: "r" (mpddrc_base),
+		  "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+		  "r" (at91_shdwc->at91_shdwc_base),
+		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+		: "r0");
+}
+
 static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
 				      u32 in_period_us)
 {
@@ -212,6 +239,8 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	const struct of_device_id *match;
+	struct device_node *np;
+	u32 ddr_type;
 	int ret;
 
 	if (!pdev->dev.of_node)
@@ -249,6 +278,23 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 
 	pm_power_off = at91_poweroff;
 
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+	if (!np)
+		return 0;
+
+	mpddrc_base = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!mpddrc_base)
+		return 0;
+
+	ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
+	if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
+	    (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
+		pm_power_off = at91_lpddr_poweroff;
+	else
+		iounmap(mpddrc_base);
+
 	return 0;
 }
 
@@ -256,7 +302,8 @@ static int __exit at91_shdwc_remove(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
 
-	if (pm_power_off == at91_poweroff)
+	if (pm_power_off == at91_poweroff ||
+	    pm_power_off == at91_lpddr_poweroff)
 		pm_power_off = NULL;
 
 	/* Reset values to disable wake-up features  */

drivers/power/supply/Kconfig

@@ -164,6 +164,12 @@ config BATTERY_SBS
 	  Say Y to include support for SBS battery driver for SBS-compliant
 	  gas gauges.
 
+config CHARGER_SBS
+        tristate "SBS Compliant charger"
+        depends on I2C
+        help
+	  Say Y to include support for SBS compilant battery chargers.
+
 config BATTERY_BQ27XXX
 	tristate "BQ27xxx battery driver"
 	help
@@ -214,6 +220,18 @@ config BATTERY_DA9150
 	  This driver can also be built as a module. If so, the module will be
 	  called da9150-fg.
 
+config CHARGER_AXP20X
+	tristate "X-Powers AXP20X and AXP22X AC power supply driver"
+	depends on MFD_AXP20X
+	depends on AXP20X_ADC
+	depends on IIO
+	help
+	  Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
+	  power supply.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called axp20x_ac_power.
+
 config AXP288_CHARGER
 	tristate "X-Powers AXP288 Charger"
 	depends on MFD_AXP20X && EXTCON_AXP288
@@ -292,13 +310,6 @@ config BATTERY_JZ4740
 	  This driver can be build as a module. If so, the module will be
 	  called jz4740-battery.
 
-config BATTERY_INTEL_MID
-	tristate "Battery driver for Intel MID platforms"
-	depends on INTEL_SCU_IPC && SPI
-	help
-	  Say Y here to enable the battery driver on Intel MID
-	  platforms.
-
 config BATTERY_RX51
 	tristate "Nokia RX-51 (N900) battery driver"
 	depends on TWL4030_MADC
@@ -370,6 +381,16 @@ config CHARGER_MAX14577
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX14577/77836 MUICs.
 
+config CHARGER_DETECTOR_MAX14656
+	tristate "Maxim MAX14656 USB charger detector"
+	depends on I2C
+	depends on OF
+	help
+	  Say Y to enable support for the Maxim MAX14656 USB charger detector.
+	  The device is compliant with the USB Battery Charging Specification
+	  Revision 1.2 and can be found e.g. in Kindle 4/5th generation
+	  readers and certain LG devices.
+
 config CHARGER_MAX77693
 	tristate "Maxim MAX77693 battery charger driver"
 	depends on MFD_MAX77693
@@ -395,6 +416,7 @@ config CHARGER_QCOM_SMBB
 	depends on MFD_SPMI_PMIC || COMPILE_TEST
 	depends on OF
 	depends on EXTCON
+	depends on REGULATOR
 	help
 	  Say Y to include support for the Switch-Mode Battery Charger and
 	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger

drivers/power/supply/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
 obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
 obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
+obj-$(CONFIG_CHARGER_AXP20X)	+= axp20x_ac_power.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
@@ -31,6 +32,7 @@ obj-$(CONFIG_BATTERY_COLLIE)	+= collie_battery.o
 obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
 obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
 obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
+obj-$(CONFIG_CHARGER_SBS)	+= sbs-charger.o
 obj-$(CONFIG_BATTERY_BQ27XXX)	+= bq27xxx_battery.o
 obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
@@ -47,7 +49,6 @@ obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
 obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
-obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
 obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
@@ -58,6 +59,7 @@ obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX14577)	+= max14577_charger.o
+obj-$(CONFIG_CHARGER_DETECTOR_MAX14656)	+= max14656_charger_detector.o
 obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o

drivers/power/supply/ab8500_btemp.c

@@ -76,8 +76,8 @@ struct ab8500_btemp_ranges {
  * @dev:		Pointer to the structure device
  * @node:		List of AB8500 BTEMPs, hence prepared for reentrance
  * @curr_source:	What current source we use, in uA
- * @bat_temp:		Dispatched battery temperature in degree Celcius
- * @prev_bat_temp	Last measured battery temperature in degree Celcius
+ * @bat_temp:		Dispatched battery temperature in degree Celsius
+ * @prev_bat_temp	Last measured battery temperature in degree Celsius
  * @parent:		Pointer to the struct ab8500
  * @gpadc:		Pointer to the struct gpadc
  * @fg:			Pointer to the struct fg
@@ -123,10 +123,7 @@ static LIST_HEAD(ab8500_btemp_list);
  */
 struct ab8500_btemp *ab8500_btemp_get(void)
 {
-	struct ab8500_btemp *btemp;
-	btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node);
-
-	return btemp;
+	return list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node);
 }
 EXPORT_SYMBOL(ab8500_btemp_get);
 
@@ -464,13 +461,13 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
  * @tbl_size:	size of the resistance to temperature table
  * @res:	resistance to calculate the temperature from
  *
- * This function returns the battery temperature in degrees Celcius
+ * This function returns the battery temperature in degrees Celsius
  * based on the NTC resistance.
  */
 static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
 	const struct abx500_res_to_temp *tbl, int tbl_size, int res)
 {
-	int i, temp;
+	int i;
 	/*
 	 * Calculate the formula for the straight line
 	 * Simple interpolation if we are within
@@ -488,9 +485,8 @@ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
 			i++;
 	}
 
-	temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
+	return tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
 		(res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
-	return temp;
 }
 
 /**

drivers/power/supply/axp20x_ac_power.c

+/*
+ * AXP20X and AXP22X PMICs' ACIN power supply driver
+ *
+ * Copyright (C) 2016 Free Electrons
+ *	Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+
+#define AXP20X_PWR_STATUS_ACIN_PRESENT	BIT(7)
+#define AXP20X_PWR_STATUS_ACIN_AVAIL	BIT(6)
+
+#define DRVNAME "axp20x-ac-power-supply"
+
+struct axp20x_ac_power {
+	struct regmap *regmap;
+	struct power_supply *supply;
+	struct iio_channel *acin_v;
+	struct iio_channel *acin_i;
+};
+
+static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
+{
+	struct axp20x_ac_power *power = devid;
+
+	power_supply_changed(power->supply);
+
+	return IRQ_HANDLED;
+}
+
+static int axp20x_ac_power_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+	int ret, reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) {
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+			return 0;
+		}
+
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		return 0;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT);
+		return 0;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
+		return 0;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = iio_read_channel_processed(power->acin_v, &val->intval);
+		if (ret)
+			return ret;
+
+		/* IIO framework gives mV but Power Supply framework gives uV */
+		val->intval *= 1000;
+
+		return 0;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = iio_read_channel_processed(power->acin_i, &val->intval);
+		if (ret)
+			return ret;
+
+		/* IIO framework gives mA but Power Supply framework gives uA */
+		val->intval *= 1000;
+
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static enum power_supply_property axp20x_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc axp20x_ac_power_desc = {
+	.name = "axp20x-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp20x_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
+	.get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp22x_ac_power_desc = {
+	.name = "axp22x-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp22x_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
+	.get_property = axp20x_ac_power_get_property,
+};
+
+struct axp_data {
+	const struct power_supply_desc	*power_desc;
+	bool				acin_adc;
+};
+
+static const struct axp_data axp20x_data = {
+	.power_desc = &axp20x_ac_power_desc,
+	.acin_adc = true,
+};
+
+static const struct axp_data axp22x_data = {
+	.power_desc = &axp22x_ac_power_desc,
+	.acin_adc = false,
+};
+
+static int axp20x_ac_power_probe(struct platform_device *pdev)
+{
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	struct axp20x_ac_power *power;
+	struct axp_data *axp_data;
+	static const char * const irq_names[] = { "ACIN_PLUGIN", "ACIN_REMOVAL",
+		NULL };
+	int i, irq, ret;
+
+	if (!of_device_is_available(pdev->dev.of_node))
+		return -ENODEV;
+
+	if (!axp20x) {
+		dev_err(&pdev->dev, "Parent drvdata not set\n");
+		return -EINVAL;
+	}
+
+	power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
+	if (!power)
+		return -ENOMEM;
+
+	axp_data = (struct axp_data *)of_device_get_match_data(&pdev->dev);
+
+	if (axp_data->acin_adc) {
+		power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
+		if (IS_ERR(power->acin_v)) {
+			if (PTR_ERR(power->acin_v) == -ENODEV)
+				return -EPROBE_DEFER;
+			return PTR_ERR(power->acin_v);
+		}
+
+		power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i");
+		if (IS_ERR(power->acin_i)) {
+			if (PTR_ERR(power->acin_i) == -ENODEV)
+				return -EPROBE_DEFER;
+			return PTR_ERR(power->acin_i);
+		}
+	}
+
+	power->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+
+	platform_set_drvdata(pdev, power);
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = power;
+
+	power->supply = devm_power_supply_register(&pdev->dev,
+						   axp_data->power_desc,
+						   &psy_cfg);
+	if (IS_ERR(power->supply))
+		return PTR_ERR(power->supply);
+
+	/* Request irqs after registering, as irqs may trigger immediately */
+	for (i = 0; irq_names[i]; i++) {
+		irq = platform_get_irq_byname(pdev, irq_names[i]);
+		if (irq < 0) {
+			dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
+				 irq_names[i], irq);
+			continue;
+		}
+		irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+		ret = devm_request_any_context_irq(&pdev->dev, irq,
+						   axp20x_ac_power_irq, 0,
+						   DRVNAME, power);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
+				 irq_names[i], ret);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id axp20x_ac_power_match[] = {
+	{
+		.compatible = "x-powers,axp202-ac-power-supply",
+		.data = (void *)&axp20x_data,
+	}, {
+		.compatible = "x-powers,axp221-ac-power-supply",
+		.data = (void *)&axp22x_data,
+	}, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
+
+static struct platform_driver axp20x_ac_power_driver = {
+	.probe = axp20x_ac_power_probe,
+	.driver = {
+		.name = DRVNAME,
+		.of_match_table = axp20x_ac_power_match,
+	},
+};
+
+module_platform_driver(axp20x_ac_power_driver);
+
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver");
+MODULE_LICENSE("GPL");

drivers/power/supply/axp20x_usb_power.c

@@ -17,10 +17,12 @@
 #include <linux/mfd/axp20x.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/iio/consumer.h>
 
 #define DRVNAME "axp20x-usb-power-supply"
 
@@ -30,6 +32,8 @@
 #define AXP20X_USB_STATUS_VBUS_VALID	BIT(2)
 
 #define AXP20X_VBUS_VHOLD_uV(b)		(4000000 + (((b) >> 3) & 7) * 100000)
+#define AXP20X_VBUS_VHOLD_MASK		GENMASK(5, 3)
+#define AXP20X_VBUS_VHOLD_OFFSET	3
 #define AXP20X_VBUS_CLIMIT_MASK		3
 #define AXP20X_VBUC_CLIMIT_900mA	0
 #define AXP20X_VBUC_CLIMIT_500mA	1
@@ -45,6 +49,9 @@ struct axp20x_usb_power {
 	struct device_node *np;
 	struct regmap *regmap;
 	struct power_supply *supply;
+	enum axp20x_variants axp20x_id;
+	struct iio_channel *vbus_v;
+	struct iio_channel *vbus_i;
 };
 
 static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
@@ -72,6 +79,20 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 		val->intval = AXP20X_VBUS_VHOLD_uV(v);
 		return 0;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+			ret = iio_read_channel_processed(power->vbus_v,
+							 &val->intval);
+			if (ret)
+				return ret;
+
+			/*
+			 * IIO framework gives mV but Power Supply framework
+			 * gives uV.
+			 */
+			val->intval *= 1000;
+			return 0;
+		}
+
 		ret = axp20x_read_variable_width(power->regmap,
 						 AXP20X_VBUS_V_ADC_H, 12);
 		if (ret < 0)
@@ -86,12 +107,10 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 
 		switch (v & AXP20X_VBUS_CLIMIT_MASK) {
 		case AXP20X_VBUC_CLIMIT_100mA:
-			if (of_device_is_compatible(power->np,
-					"x-powers,axp202-usb-power-supply")) {
-				val->intval = 100000;
-			} else {
+			if (power->axp20x_id == AXP221_ID)
 				val->intval = -1; /* No 100mA limit */
-			}
+			else
+				val->intval = 100000;
 			break;
 		case AXP20X_VBUC_CLIMIT_500mA:
 			val->intval = 500000;
@@ -105,6 +124,20 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 		}
 		return 0;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+			ret = iio_read_channel_processed(power->vbus_i,
+							 &val->intval);
+			if (ret)
+				return ret;
+
+			/*
+			 * IIO framework gives mA but Power Supply framework
+			 * gives uA.
+			 */
+			val->intval *= 1000;
+			return 0;
+		}
+
 		ret = axp20x_read_variable_width(power->regmap,
 						 AXP20X_VBUS_I_ADC_H, 12);
 		if (ret < 0)
@@ -130,8 +163,7 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 
 		val->intval = POWER_SUPPLY_HEALTH_GOOD;
 
-		if (of_device_is_compatible(power->np,
-				"x-powers,axp202-usb-power-supply")) {
+		if (power->axp20x_id == AXP202_ID) {
 			ret = regmap_read(power->regmap,
 					  AXP20X_USB_OTG_STATUS, &v);
 			if (ret)
@@ -155,6 +187,81 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
+					    int intval)
+{
+	int val;
+
+	switch (intval) {
+	case 4000000:
+	case 4100000:
+	case 4200000:
+	case 4300000:
+	case 4400000:
+	case 4500000:
+	case 4600000:
+	case 4700000:
+		val = (intval - 4000000) / 100000;
+		return regmap_update_bits(power->regmap,
+					  AXP20X_VBUS_IPSOUT_MGMT,
+					  AXP20X_VBUS_VHOLD_MASK,
+					  val << AXP20X_VBUS_VHOLD_OFFSET);
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
+					    int intval)
+{
+	int val;
+
+	switch (intval) {
+	case 100000:
+		if (power->axp20x_id == AXP221_ID)
+			return -EINVAL;
+	case 500000:
+	case 900000:
+		val = (900000 - intval) / 400000;
+		return regmap_update_bits(power->regmap,
+					  AXP20X_VBUS_IPSOUT_MGMT,
+					  AXP20X_VBUS_CLIMIT_MASK, val);
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_usb_power_set_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 const union power_supply_propval *val)
+{
+	struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		return axp20x_usb_power_set_voltage_min(power, val->intval);
+
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		return axp20x_usb_power_set_current_max(power, val->intval);
+
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
+					   enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+	       psp == POWER_SUPPLY_PROP_CURRENT_MAX;
+}
+
 static enum power_supply_property axp20x_usb_power_properties[] = {
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_PRESENT,
@@ -178,7 +285,9 @@ static const struct power_supply_desc axp20x_usb_power_desc = {
 	.type = POWER_SUPPLY_TYPE_USB,
 	.properties = axp20x_usb_power_properties,
 	.num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
+	.property_is_writeable = axp20x_usb_power_prop_writeable,
 	.get_property = axp20x_usb_power_get_property,
+	.set_property = axp20x_usb_power_set_property,
 };
 
 static const struct power_supply_desc axp22x_usb_power_desc = {
@@ -186,9 +295,41 @@ static const struct power_supply_desc axp22x_usb_power_desc = {
 	.type = POWER_SUPPLY_TYPE_USB,
 	.properties = axp22x_usb_power_properties,
 	.num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
+	.property_is_writeable = axp20x_usb_power_prop_writeable,
 	.get_property = axp20x_usb_power_get_property,
+	.set_property = axp20x_usb_power_set_property,
 };
 
+static int configure_iio_channels(struct platform_device *pdev,
+				  struct axp20x_usb_power *power)
+{
+	power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+	if (IS_ERR(power->vbus_v)) {
+		if (PTR_ERR(power->vbus_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(power->vbus_v);
+	}
+
+	power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i");
+	if (IS_ERR(power->vbus_i)) {
+		if (PTR_ERR(power->vbus_i) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(power->vbus_i);
+	}
+
+	return 0;
+}
+
+static int configure_adc_registers(struct axp20x_usb_power *power)
+{
+	/* Enable vbus voltage and current measurement */
+	return regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
+				  AXP20X_ADC_EN1_VBUS_CURR |
+				  AXP20X_ADC_EN1_VBUS_VOLT,
+				  AXP20X_ADC_EN1_VBUS_CURR |
+				  AXP20X_ADC_EN1_VBUS_VOLT);
+}
+
 static int axp20x_usb_power_probe(struct platform_device *pdev)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -214,11 +355,13 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 	if (!power)
 		return -ENOMEM;
 
+	power->axp20x_id = (enum axp20x_variants)of_device_get_match_data(
+								&pdev->dev);
+
 	power->np = pdev->dev.of_node;
 	power->regmap = axp20x->regmap;
 
-	if (of_device_is_compatible(power->np,
-			"x-powers,axp202-usb-power-supply")) {
+	if (power->axp20x_id == AXP202_ID) {
 		/* Enable vbus valid checking */
 		ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
 					 AXP20X_VBUS_MON_VBUS_VALID,
@@ -226,17 +369,18 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 		if (ret)
 			return ret;
 
-		/* Enable vbus voltage and current measurement */
-		ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
-			AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT,
-			AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT);
+		if (IS_ENABLED(CONFIG_AXP20X_ADC))
+			ret = configure_iio_channels(pdev, power);
+		else
+			ret = configure_adc_registers(power);
+
 		if (ret)
 			return ret;
 
 		usb_power_desc = &axp20x_usb_power_desc;
 		irq_names = axp20x_irq_names;
-	} else if (of_device_is_compatible(power->np,
-			"x-powers,axp221-usb-power-supply")) {
+	} else if (power->axp20x_id == AXP221_ID ||
+		   power->axp20x_id == AXP223_ID) {
 		usb_power_desc = &axp22x_usb_power_desc;
 		irq_names = axp22x_irq_names;
 	} else {
@@ -273,9 +417,16 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id axp20x_usb_power_match[] = {
-	{ .compatible = "x-powers,axp202-usb-power-supply" },
-	{ .compatible = "x-powers,axp221-usb-power-supply" },
-	{ }
+	{
+		.compatible = "x-powers,axp202-usb-power-supply",
+		.data = (void *)AXP202_ID,
+	}, {
+		.compatible = "x-powers,axp221-usb-power-supply",
+		.data = (void *)AXP221_ID,
+	}, {
+		.compatible = "x-powers,axp223-usb-power-supply",
+		.data = (void *)AXP223_ID,
+	}, { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);
 

drivers/power/supply/bq2415x_charger.c

@@ -1569,6 +1569,11 @@ static int bq2415x_probe(struct i2c_client *client,
 		acpi_id =
 			acpi_match_device(client->dev.driver->acpi_match_table,
 					  &client->dev);
+		if (!acpi_id) {
+			dev_err(&client->dev, "failed to match device name\n");
+			ret = -ENODEV;
+			goto error_1;
+		}
 		name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
 	}
 	if (!name) {

drivers/power/supply/bq24190_charger.c

@@ -144,10 +144,7 @@
  * so the first read after a fault returns the latched value and subsequent
  * reads return the current value.  In order to return the fault status
  * to the user, have the interrupt handler save the reg's value and retrieve
- * it in the appropriate health/status routine.  Each routine has its own
- * flag indicating whether it should use the value stored by the last run
- * of the interrupt handler or do an actual reg read.  That way each routine
- * can report back whatever fault may have occured.
+ * it in the appropriate health/status routine.
  */
 struct bq24190_dev_info {
 	struct i2c_client		*client;
@@ -159,10 +156,6 @@ struct bq24190_dev_info {
 	unsigned int			gpio_int;
 	unsigned int			irq;
 	struct mutex			f_reg_lock;
-	bool				first_time;
-	bool				charger_health_valid;
-	bool				battery_health_valid;
-	bool				battery_status_valid;
 	u8				f_reg;
 	u8				ss_reg;
 	u8				watchdog;
@@ -199,7 +192,7 @@ static const int bq24190_cvc_vreg_values[] = {
 	4400000
 };
 
-/* REG06[1:0] (TREG) in tenths of degrees Celcius */
+/* REG06[1:0] (TREG) in tenths of degrees Celsius */
 static const int bq24190_ictrc_treg_values[] = {
 	600, 800, 1000, 1200
 };
@@ -636,21 +629,11 @@ static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
 		union power_supply_propval *val)
 {
 	u8 v;
-	int health, ret;
+	int health;
 
 	mutex_lock(&bdi->f_reg_lock);
-
-	if (bdi->charger_health_valid) {
-		v = bdi->f_reg;
-		bdi->charger_health_valid = false;
-		mutex_unlock(&bdi->f_reg_lock);
-	} else {
-		mutex_unlock(&bdi->f_reg_lock);
-
-		ret = bq24190_read(bdi, BQ24190_REG_F, &v);
-		if (ret < 0)
-			return ret;
-	}
+	v = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
 
 	if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
 		/*
@@ -937,18 +920,8 @@ static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
 	int status, ret;
 
 	mutex_lock(&bdi->f_reg_lock);
-
-	if (bdi->battery_status_valid) {
-		chrg_fault = bdi->f_reg;
-		bdi->battery_status_valid = false;
-		mutex_unlock(&bdi->f_reg_lock);
-	} else {
-		mutex_unlock(&bdi->f_reg_lock);
-
-		ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault);
-		if (ret < 0)
-			return ret;
-	}
+	chrg_fault = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
 
 	chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
 	chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
@@ -996,21 +969,11 @@ static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
 		union power_supply_propval *val)
 {
 	u8 v;
-	int health, ret;
+	int health;
 
 	mutex_lock(&bdi->f_reg_lock);
-
-	if (bdi->battery_health_valid) {
-		v = bdi->f_reg;
-		bdi->battery_health_valid = false;
-		mutex_unlock(&bdi->f_reg_lock);
-	} else {
-		mutex_unlock(&bdi->f_reg_lock);
-
-		ret = bq24190_read(bdi, BQ24190_REG_F, &v);
-		if (ret < 0)
-			return ret;
-	}
+	v = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
 
 	if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
 		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
@@ -1197,9 +1160,12 @@ static const struct power_supply_desc bq24190_battery_desc = {
 static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 {
 	struct bq24190_dev_info *bdi = data;
-	bool alert_userspace = false;
+	const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
+	const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
+				| BQ24190_REG_F_NTC_FAULT_MASK;
+	bool alert_charger = false, alert_battery = false;
 	u8 ss_reg = 0, f_reg = 0;
-	int ret;
+	int i, ret;
 
 	pm_runtime_get_sync(bdi->dev);
 
@@ -1209,6 +1175,32 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 		goto out;
 	}
 
+	i = 0;
+	do {
+		ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+		if (ret < 0) {
+			dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+			goto out;
+		}
+	} while (f_reg && ++i < 2);
+
+	if (f_reg != bdi->f_reg) {
+		dev_info(bdi->dev,
+			"Fault: boost %d, charge %d, battery %d, ntc %d\n",
+			!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
+
+		mutex_lock(&bdi->f_reg_lock);
+		if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
+			alert_battery = true;
+		if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
+			alert_charger = true;
+		bdi->f_reg = f_reg;
+		mutex_unlock(&bdi->f_reg_lock);
+	}
+
 	if (ss_reg != bdi->ss_reg) {
 		/*
 		 * The device is in host mode so when PG_STAT goes from 1->0
@@ -1225,47 +1217,17 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 					ret);
 		}
 
+		if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+			alert_battery = true;
+		if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+			alert_charger = true;
 		bdi->ss_reg = ss_reg;
-		alert_userspace = true;
-	}
-
-	mutex_lock(&bdi->f_reg_lock);
-
-	ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
-	if (ret < 0) {
-		mutex_unlock(&bdi->f_reg_lock);
-		dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
-		goto out;
-	}
-
-	if (f_reg != bdi->f_reg) {
-		bdi->f_reg = f_reg;
-		bdi->charger_health_valid = true;
-		bdi->battery_health_valid = true;
-		bdi->battery_status_valid = true;
-
-		alert_userspace = true;
 	}
 
-	mutex_unlock(&bdi->f_reg_lock);
-
-	/*
-	 * Sometimes bq24190 gives a steady trickle of interrupts even
-	 * though the watchdog timer is turned off and neither the STATUS
-	 * nor FAULT registers have changed.  Weed out these sprurious
-	 * interrupts so userspace isn't alerted for no reason.
-	 * In addition, the chip always generates an interrupt after
-	 * register reset so we should ignore that one (the very first
-	 * interrupt received).
-	 */
-	if (alert_userspace) {
-		if (!bdi->first_time) {
-			power_supply_changed(bdi->charger);
-			power_supply_changed(bdi->battery);
-		} else {
-			bdi->first_time = false;
-		}
-	}
+	if (alert_charger)
+		power_supply_changed(bdi->charger);
+	if (alert_battery)
+		power_supply_changed(bdi->battery);
 
 out:
 	pm_runtime_put_sync(bdi->dev);
@@ -1300,6 +1262,10 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
 		goto out;
 
 	ret = bq24190_set_mode_host(bdi);
+	if (ret < 0)
+		goto out;
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
 out:
 	pm_runtime_put_sync(bdi->dev);
 	return ret;
@@ -1375,10 +1341,8 @@ static int bq24190_probe(struct i2c_client *client,
 	bdi->model = id->driver_data;
 	strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
 	mutex_init(&bdi->f_reg_lock);
-	bdi->first_time = true;
-	bdi->charger_health_valid = false;
-	bdi->battery_health_valid = false;
-	bdi->battery_status_valid = false;
+	bdi->f_reg = 0;
+	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
 
 	i2c_set_clientdata(client, bdi);
 
@@ -1392,22 +1356,13 @@ static int bq24190_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
-			bq24190_irq_handler_thread,
-			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-			"bq24190-charger", bdi);
-	if (ret < 0) {
-		dev_err(dev, "Can't set up irq handler\n");
-		goto out1;
-	}
-
 	pm_runtime_enable(dev);
 	pm_runtime_resume(dev);
 
 	ret = bq24190_hw_init(bdi);
 	if (ret < 0) {
 		dev_err(dev, "Hardware init failed\n");
-		goto out2;
+		goto out1;
 	}
 
 	charger_cfg.drv_data = bdi;
@@ -1418,7 +1373,7 @@ static int bq24190_probe(struct i2c_client *client,
 	if (IS_ERR(bdi->charger)) {
 		dev_err(dev, "Can't register charger\n");
 		ret = PTR_ERR(bdi->charger);
-		goto out2;
+		goto out1;
 	}
 
 	battery_cfg.drv_data = bdi;
@@ -1427,27 +1382,39 @@ static int bq24190_probe(struct i2c_client *client,
 	if (IS_ERR(bdi->battery)) {
 		dev_err(dev, "Can't register battery\n");
 		ret = PTR_ERR(bdi->battery);
-		goto out3;
+		goto out2;
 	}
 
 	ret = bq24190_sysfs_create_group(bdi);
 	if (ret) {
 		dev_err(dev, "Can't create sysfs entries\n");
+		goto out3;
+	}
+
+	ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
+			bq24190_irq_handler_thread,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			"bq24190-charger", bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't set up irq handler\n");
 		goto out4;
 	}
 
 	return 0;
 
 out4:
-	power_supply_unregister(bdi->battery);
+	bq24190_sysfs_remove_group(bdi);
+
 out3:
-	power_supply_unregister(bdi->charger);
+	power_supply_unregister(bdi->battery);
+
 out2:
-	pm_runtime_disable(dev);
+	power_supply_unregister(bdi->charger);
+
 out1:
+	pm_runtime_disable(dev);
 	if (bdi->gpio_int)
 		gpio_free(bdi->gpio_int);
-
 	return ret;
 }
 
@@ -1488,12 +1455,13 @@ static int bq24190_pm_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
 
-	bdi->charger_health_valid = false;
-	bdi->battery_health_valid = false;
-	bdi->battery_status_valid = false;
+	bdi->f_reg = 0;
+	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
 
 	pm_runtime_get_sync(bdi->dev);
 	bq24190_register_reset(bdi);
+	bq24190_set_mode_host(bdi);
+	bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
 	pm_runtime_put_sync(bdi->dev);
 
 	/* Things may have changed while suspended so alert upper layer */

drivers/power/supply/bq24735-charger.c

@@ -50,6 +50,8 @@ struct bq24735 {
 	struct bq24735_platform		*pdata;
 	struct mutex			lock;
 	struct gpio_desc		*status_gpio;
+	struct delayed_work		poll;
+	u32				poll_interval;
 	bool				charging;
 };
 
@@ -105,26 +107,6 @@ static int bq24735_update_word(struct i2c_client *client, u8 reg,
 	return bq24735_write_word(client, reg, tmp);
 }
 
-static inline int bq24735_enable_charging(struct bq24735 *charger)
-{
-	if (charger->pdata->ext_control)
-		return 0;
-
-	return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
-				   BQ24735_CHG_OPT_CHARGE_DISABLE,
-				   ~BQ24735_CHG_OPT_CHARGE_DISABLE);
-}
-
-static inline int bq24735_disable_charging(struct bq24735 *charger)
-{
-	if (charger->pdata->ext_control)
-		return 0;
-
-	return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
-				   BQ24735_CHG_OPT_CHARGE_DISABLE,
-				   BQ24735_CHG_OPT_CHARGE_DISABLE);
-}
-
 static int bq24735_config_charger(struct bq24735 *charger)
 {
 	struct bq24735_platform *pdata = charger->pdata;
@@ -176,6 +158,31 @@ static int bq24735_config_charger(struct bq24735 *charger)
 	return 0;
 }
 
+static inline int bq24735_enable_charging(struct bq24735 *charger)
+{
+	int ret;
+
+	if (charger->pdata->ext_control)
+		return 0;
+
+	ret = bq24735_config_charger(charger);
+	if (ret)
+		return ret;
+
+	return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+				   BQ24735_CHG_OPT_CHARGE_DISABLE, 0);
+}
+
+static inline int bq24735_disable_charging(struct bq24735 *charger)
+{
+	if (charger->pdata->ext_control)
+		return 0;
+
+	return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+				   BQ24735_CHG_OPT_CHARGE_DISABLE,
+				   BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
 static bool bq24735_charger_is_present(struct bq24735 *charger)
 {
 	if (charger->status_gpio) {
@@ -185,7 +192,7 @@ static bool bq24735_charger_is_present(struct bq24735 *charger)
 
 		ac = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
 		if (ac < 0) {
-			dev_err(&charger->client->dev,
+			dev_dbg(&charger->client->dev,
 				"Failed to read charger options : %d\n",
 				ac);
 			return false;
@@ -210,11 +217,8 @@ static int bq24735_charger_is_charging(struct bq24735 *charger)
 	return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE);
 }
 
-static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+static void bq24735_update(struct bq24735 *charger)
 {
-	struct power_supply *psy = devid;
-	struct bq24735 *charger = to_bq24735(psy);
-
 	mutex_lock(&charger->lock);
 
 	if (charger->charging && bq24735_charger_is_present(charger))
@@ -224,11 +228,29 @@ static irqreturn_t bq24735_charger_isr(int irq, void *devid)
 
 	mutex_unlock(&charger->lock);
 
-	power_supply_changed(psy);
+	power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+	struct power_supply *psy = devid;
+	struct bq24735 *charger = to_bq24735(psy);
+
+	bq24735_update(charger);
 
 	return IRQ_HANDLED;
 }
 
+static void bq24735_poll(struct work_struct *work)
+{
+	struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+	bq24735_update(charger);
+
+	schedule_delayed_work(&charger->poll,
+			      msecs_to_jiffies(charger->poll_interval));
+}
+
 static int bq24735_charger_get_property(struct power_supply *psy,
 					enum power_supply_property psp,
 					union power_supply_propval *val)
@@ -276,7 +298,6 @@ static int bq24735_charger_set_property(struct power_supply *psy,
 			mutex_unlock(&charger->lock);
 			if (ret)
 				return ret;
-			bq24735_config_charger(charger);
 			break;
 		case POWER_SUPPLY_STATUS_DISCHARGING:
 		case POWER_SUPPLY_STATUS_NOT_CHARGING:
@@ -395,7 +416,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	if (!charger->status_gpio || bq24735_charger_is_present(charger)) {
+	if (bq24735_charger_is_present(charger)) {
 		ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
 		if (ret < 0) {
 			dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
@@ -416,16 +437,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
 				"device id mismatch. 0x000b != 0x%04x\n", ret);
 			return -ENODEV;
 		}
-	}
-
-	ret = bq24735_config_charger(charger);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed in configuring charger");
-		return ret;
-	}
 
-	/* check for AC adapter presence */
-	if (bq24735_charger_is_present(charger)) {
 		ret = bq24735_enable_charging(charger);
 		if (ret < 0) {
 			dev_err(&client->dev, "Failed to enable charging\n");
@@ -456,11 +468,32 @@ static int bq24735_charger_probe(struct i2c_client *client,
 				client->irq, ret);
 			return ret;
 		}
+	} else {
+		ret = device_property_read_u32(&client->dev, "poll-interval",
+					       &charger->poll_interval);
+		if (ret)
+			return 0;
+		if (!charger->poll_interval)
+			return 0;
+
+		INIT_DELAYED_WORK(&charger->poll, bq24735_poll);
+		schedule_delayed_work(&charger->poll,
+				      msecs_to_jiffies(charger->poll_interval));
 	}
 
 	return 0;
 }
 
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+	struct bq24735 *charger = i2c_get_clientdata(client);
+
+	if (charger->poll_interval)
+		cancel_delayed_work_sync(&charger->poll);
+
+	return 0;
+}
+
 static const struct i2c_device_id bq24735_charger_id[] = {
 	{ "bq24735-charger", 0 },
 	{}
@@ -479,6 +512,7 @@ static struct i2c_driver bq24735_charger_driver = {
 		.of_match_table = bq24735_match_ids,
 	},
 	.probe = bq24735_charger_probe,
+	.remove = bq24735_charger_remove,
 	.id_table = bq24735_charger_id,
 };
 

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -148,9 +148,17 @@ static int bq27xxx_battery_i2c_remove(struct i2c_client *client)
 static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27200", BQ27000 },
 	{ "bq27210", BQ27010 },
-	{ "bq27500", BQ27500 },
-	{ "bq27510", BQ27510 },
-	{ "bq27520", BQ27510 },
+	{ "bq27500", BQ2750X },
+	{ "bq27510", BQ2751X },
+	{ "bq27520", BQ2751X },
+	{ "bq27500-1", BQ27500 },
+	{ "bq27510g1", BQ27510G1 },
+	{ "bq27510g2", BQ27510G2 },
+	{ "bq27510g3", BQ27510G3 },
+	{ "bq27520g1", BQ27520G1 },
+	{ "bq27520g2", BQ27520G2 },
+	{ "bq27520g3", BQ27520G3 },
+	{ "bq27520g4", BQ27520G4 },
 	{ "bq27530", BQ27530 },
 	{ "bq27531", BQ27530 },
 	{ "bq27541", BQ27541 },
@@ -173,6 +181,14 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27500" },
 	{ .compatible = "ti,bq27510" },
 	{ .compatible = "ti,bq27520" },
+	{ .compatible = "ti,bq27500-1" },
+	{ .compatible = "ti,bq27510g1" },
+	{ .compatible = "ti,bq27510g2" },
+	{ .compatible = "ti,bq27510g3" },
+	{ .compatible = "ti,bq27520g1" },
+	{ .compatible = "ti,bq27520g2" },
+	{ .compatible = "ti,bq27520g3" },
+	{ .compatible = "ti,bq27520g4" },
 	{ .compatible = "ti,bq27530" },
 	{ .compatible = "ti,bq27531" },
 	{ .compatible = "ti,bq27541" },

drivers/power/supply/gpio-charger.c

@@ -14,7 +14,7 @@
  */
 
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio.h> /* For legacy platform data */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -23,7 +23,7 @@
 #include <linux/power_supply.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <linux/power/gpio-charger.h>
 
@@ -34,6 +34,8 @@ struct gpio_charger {
 
 	struct power_supply *charger;
 	struct power_supply_desc charger_desc;
+	struct gpio_desc *gpiod;
+	bool legacy_gpio_requested;
 };
 
 static irqreturn_t gpio_charger_irq(int irq, void *devid)
@@ -58,7 +60,8 @@ static int gpio_charger_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = !!gpio_get_value_cansleep(pdata->gpio);
+		val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
+		/* This xor is only ever used with legacy pdata GPIO */
 		val->intval ^= pdata->gpio_active_low;
 		break;
 	default:
@@ -78,7 +81,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
 	struct device_node *np = dev->of_node;
 	struct gpio_charger_platform_data *pdata;
 	const char *chargetype;
-	enum of_gpio_flags flags;
 	int ret;
 
 	if (!np)
@@ -89,16 +91,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
 		return ERR_PTR(-ENOMEM);
 
 	pdata->name = np->name;
-
-	pdata->gpio = of_get_gpio_flags(np, 0, &flags);
-	if (pdata->gpio < 0) {
-		if (pdata->gpio != -EPROBE_DEFER)
-			dev_err(dev, "could not get charger gpio\n");
-		return ERR_PTR(pdata->gpio);
-	}
-
-	pdata->gpio_active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
-
 	pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
 	ret = of_property_read_string(np, "charger-type", &chargetype);
 	if (ret >= 0) {
@@ -144,11 +136,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (!gpio_is_valid(pdata->gpio)) {
-		dev_err(&pdev->dev, "Invalid gpio pin\n");
-		return -EINVAL;
-	}
-
 	gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger),
 					GFP_KERNEL);
 	if (!gpio_charger) {
@@ -156,6 +143,45 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	/*
+	 * This will fetch a GPIO descriptor from device tree, ACPI or
+	 * boardfile descriptor tables. It's good to try this first.
+	 */
+	gpio_charger->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
+
+	/*
+	 * If this fails and we're not using device tree, try the
+	 * legacy platform data method.
+	 */
+	if (IS_ERR(gpio_charger->gpiod) && !pdev->dev.of_node) {
+		/* Non-DT: use legacy GPIO numbers */
+		if (!gpio_is_valid(pdata->gpio)) {
+			dev_err(&pdev->dev, "Invalid gpio pin in pdata\n");
+			return -EINVAL;
+		}
+		ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to request gpio pin: %d\n",
+				ret);
+			return ret;
+		}
+		gpio_charger->legacy_gpio_requested = true;
+		ret = gpio_direction_input(pdata->gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to set gpio to input: %d\n",
+				ret);
+			goto err_gpio_free;
+		}
+		/* Then convert this to gpiod for now */
+		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
+	} else if (IS_ERR(gpio_charger->gpiod)) {
+		/* Just try again if this happens */
+		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "error getting GPIO descriptor\n");
+		return PTR_ERR(gpio_charger->gpiod);
+	}
+
 	charger_desc = &gpio_charger->charger_desc;
 
 	charger_desc->name = pdata->name ? pdata->name : "gpio-charger";
@@ -169,17 +195,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	psy_cfg.of_node = pdev->dev.of_node;
 	psy_cfg.drv_data = gpio_charger;
 
-	ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret);
-		goto err_free;
-	}
-	ret = gpio_direction_input(pdata->gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret);
-		goto err_gpio_free;
-	}
-
 	gpio_charger->pdata = pdata;
 
 	gpio_charger->charger = power_supply_register(&pdev->dev,
@@ -191,7 +206,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		goto err_gpio_free;
 	}
 
-	irq = gpio_to_irq(pdata->gpio);
+	irq = gpiod_to_irq(gpio_charger->gpiod);
 	if (irq > 0) {
 		ret = request_any_context_irq(irq, gpio_charger_irq,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
@@ -209,8 +224,8 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	return 0;
 
 err_gpio_free:
-	gpio_free(pdata->gpio);
-err_free:
+	if (gpio_charger->legacy_gpio_requested)
+		gpio_free(pdata->gpio);
 	return ret;
 }
 
@@ -223,7 +238,8 @@ static int gpio_charger_remove(struct platform_device *pdev)
 
 	power_supply_unregister(gpio_charger->charger);
 
-	gpio_free(gpio_charger->pdata->gpio);
+	if (gpio_charger->legacy_gpio_requested)
+		gpio_free(gpio_charger->pdata->gpio);
 
 	return 0;
 }

drivers/power/supply/max14656_charger_detector.c

+/*
+ * Maxim MAX14656 / AL32 USB Charger Detector driver
+ *
+ * Copyright (C) 2014 LG Electronics, Inc
+ * Copyright (C) 2016 Alexander Kurz <akurz@blala.de>
+ *
+ * Components from Maxim AL32 Charger detection Driver for MX50 Yoshi Board
+ * Copyright (C) Amazon Technologies Inc. All rights reserved.
+ * Manish Lachwani (lachwani@lab126.com)
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define MAX14656_MANUFACTURER	"Maxim Integrated"
+#define MAX14656_NAME		"max14656"
+
+#define MAX14656_DEVICE_ID	0x00
+#define MAX14656_INTERRUPT_1	0x01
+#define MAX14656_INTERRUPT_2	0x02
+#define MAX14656_STATUS_1	0x03
+#define MAX14656_STATUS_2	0x04
+#define MAX14656_INTMASK_1	0x05
+#define MAX14656_INTMASK_2	0x06
+#define MAX14656_CONTROL_1	0x07
+#define MAX14656_CONTROL_2	0x08
+#define MAX14656_CONTROL_3	0x09
+
+#define DEVICE_VENDOR_MASK	0xf0
+#define DEVICE_REV_MASK		0x0f
+#define INT_EN_REG_MASK		BIT(4)
+#define CHG_TYPE_INT_MASK	BIT(0)
+#define STATUS1_VB_VALID_MASK	BIT(4)
+#define STATUS1_CHG_TYPE_MASK	0xf
+#define INT1_DCD_TIMEOUT_MASK	BIT(7)
+#define CONTROL1_DEFAULT	0x0d
+#define CONTROL1_INT_EN		BIT(4)
+#define CONTROL1_INT_ACTIVE_HIGH	BIT(5)
+#define CONTROL1_EDGE		BIT(7)
+#define CONTROL2_DEFAULT	0x8e
+#define CONTROL2_ADC_EN		BIT(0)
+#define CONTROL3_DEFAULT	0x8d
+
+enum max14656_chg_type {
+	MAX14656_NO_CHARGER	= 0,
+	MAX14656_SDP_CHARGER,
+	MAX14656_CDP_CHARGER,
+	MAX14656_DCP_CHARGER,
+	MAX14656_APPLE_500MA_CHARGER,
+	MAX14656_APPLE_1A_CHARGER,
+	MAX14656_APPLE_2A_CHARGER,
+	MAX14656_SPECIAL_500MA_CHARGER,
+	MAX14656_APPLE_12W,
+	MAX14656_CHARGER_LAST
+};
+
+static const struct max14656_chg_type_props {
+	enum power_supply_type type;
+} chg_type_props[] = {
+	{ POWER_SUPPLY_TYPE_UNKNOWN },
+	{ POWER_SUPPLY_TYPE_USB },
+	{ POWER_SUPPLY_TYPE_USB_CDP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB },
+};
+
+struct max14656_chip {
+	struct i2c_client	*client;
+	struct power_supply	*detect_psy;
+	struct power_supply_desc psy_desc;
+	struct delayed_work	irq_work;
+
+	int irq;
+	int online;
+};
+
+static int max14656_read_reg(struct i2c_client *client, int reg, u8 *val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"i2c read fail: can't read from %02x: %d\n",
+			reg, ret);
+		return ret;
+	}
+	*val = ret;
+	return 0;
+}
+
+static int max14656_write_reg(struct i2c_client *client, int reg, u8 val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"i2c write fail: can't write %02x to %02x: %d\n",
+			val, reg, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int max14656_read_block_reg(struct i2c_client *client, u8 reg,
+				  u8 length, u8 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg, length, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to block read reg 0x%x: %d\n",
+				reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+#define        REG_TOTAL_NUM   5
+static void max14656_irq_worker(struct work_struct *work)
+{
+	struct max14656_chip *chip =
+		container_of(work, struct max14656_chip, irq_work.work);
+
+	u8 buf[REG_TOTAL_NUM];
+	u8 chg_type;
+	int ret = 0;
+
+	ret = max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
+				      REG_TOTAL_NUM, buf);
+
+	if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) &&
+		(buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) {
+		chg_type = buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK;
+		if (chg_type < MAX14656_CHARGER_LAST)
+			chip->psy_desc.type = chg_type_props[chg_type].type;
+		else
+			chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+		chip->online = 1;
+	} else {
+		chip->online = 0;
+		chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+	}
+
+	power_supply_changed(chip->detect_psy);
+}
+
+static irqreturn_t max14656_irq(int irq, void *dev_id)
+{
+	struct max14656_chip *chip = dev_id;
+
+	schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(100));
+
+	return IRQ_HANDLED;
+}
+
+static int max14656_hw_init(struct max14656_chip *chip)
+{
+	uint8_t val = 0;
+	uint8_t rev;
+	struct i2c_client *client = chip->client;
+
+	if (max14656_read_reg(client, MAX14656_DEVICE_ID, &val))
+		return -ENODEV;
+
+	if ((val & DEVICE_VENDOR_MASK) != 0x20) {
+		dev_err(&client->dev, "wrong vendor ID %d\n",
+			((val & DEVICE_VENDOR_MASK) >> 4));
+		return -ENODEV;
+	}
+	rev = val & DEVICE_REV_MASK;
+
+	/* Turn on ADC_EN */
+	if (max14656_write_reg(client, MAX14656_CONTROL_2, CONTROL2_ADC_EN))
+		return -EINVAL;
+
+	/* turn on interrupts and low power mode */
+	if (max14656_write_reg(client, MAX14656_CONTROL_1,
+		CONTROL1_DEFAULT |
+		CONTROL1_INT_EN |
+		CONTROL1_INT_ACTIVE_HIGH |
+		CONTROL1_EDGE))
+		return -EINVAL;
+
+	if (max14656_write_reg(client, MAX14656_INTMASK_1, 0x3))
+		return -EINVAL;
+
+	if (max14656_write_reg(client, MAX14656_INTMASK_2, 0x1))
+		return -EINVAL;
+
+	dev_info(&client->dev, "detected revision %d\n", rev);
+	return 0;
+}
+
+static int max14656_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max14656_chip *chip = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = chip->online;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = MAX14656_NAME;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = MAX14656_MANUFACTURER;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property max14656_battery_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max14656_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct device *dev = &client->dev;
+	struct power_supply_config psy_cfg = {};
+	struct max14656_chip *chip;
+	int irq = client->irq;
+	int ret = 0;
+
+	if (irq <= 0) {
+		dev_err(dev, "invalid irq number: %d\n", irq);
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	psy_cfg.drv_data = chip;
+	chip->client = client;
+	chip->online = 0;
+	chip->psy_desc.name = MAX14656_NAME;
+	chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+	chip->psy_desc.properties = max14656_battery_props;
+	chip->psy_desc.num_properties = ARRAY_SIZE(max14656_battery_props);
+	chip->psy_desc.get_property = max14656_get_property;
+	chip->irq = irq;
+
+	ret = max14656_hw_init(chip);
+	if (ret)
+		return -ENODEV;
+
+	INIT_DELAYED_WORK(&chip->irq_work, max14656_irq_worker);
+
+	ret = devm_request_irq(dev, chip->irq, max14656_irq,
+			       IRQF_TRIGGER_FALLING,
+			       MAX14656_NAME, chip);
+	if (ret) {
+		dev_err(dev, "request_irq %d failed\n", chip->irq);
+		return -EINVAL;
+	}
+	enable_irq_wake(chip->irq);
+
+	chip->detect_psy = devm_power_supply_register(dev,
+		       &chip->psy_desc, &psy_cfg);
+	if (IS_ERR(chip->detect_psy)) {
+		dev_err(dev, "power_supply_register failed\n");
+		return -EINVAL;
+	}
+
+	schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(2000));
+
+	return 0;
+}
+
+static const struct i2c_device_id max14656_id[] = {
+	{ "max14656", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max14656_id);
+
+static const struct of_device_id max14656_match_table[] = {
+	{ .compatible = "maxim,max14656", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, max14656_match_table);
+
+static struct i2c_driver max14656_i2c_driver = {
+	.driver = {
+		.name	= "max14656",
+		.of_match_table = max14656_match_table,
+	},
+	.probe		= max14656_probe,
+	.id_table	= max14656_id,
+};
+module_i2c_driver(max14656_i2c_driver);
+
+MODULE_DESCRIPTION("MAX14656 USB charger detector");
+MODULE_LICENSE("GPL v2");

drivers/power/supply/max8997_charger.c

@@ -148,10 +148,8 @@ static int max8997_battery_probe(struct platform_device *pdev)
 
 	charger = devm_kzalloc(&pdev->dev, sizeof(struct charger_data),
 				GFP_KERNEL);
-	if (charger == NULL) {
-		dev_err(&pdev->dev, "Cannot allocate memory.\n");
+	if (!charger)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(pdev, charger);
 
@@ -161,7 +159,7 @@ static int max8997_battery_probe(struct platform_device *pdev)
 
 	psy_cfg.drv_data = charger;
 
-	charger->battery = power_supply_register(&pdev->dev,
+	charger->battery = devm_power_supply_register(&pdev->dev,
 						 &max8997_battery_desc,
 						 &psy_cfg);
 	if (IS_ERR(charger->battery)) {
@@ -172,14 +170,6 @@ static int max8997_battery_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int max8997_battery_remove(struct platform_device *pdev)
-{
-	struct charger_data *charger = platform_get_drvdata(pdev);
-
-	power_supply_unregister(charger->battery);
-	return 0;
-}
-
 static const struct platform_device_id max8997_battery_id[] = {
 	{ "max8997-battery", 0 },
 	{ }
@@ -191,7 +181,6 @@ static struct platform_driver max8997_battery_driver = {
 		.name = "max8997-battery",
 	},
 	.probe = max8997_battery_probe,
-	.remove = max8997_battery_remove,
 	.id_table = max8997_battery_id,
 };
 

drivers/power/supply/pcf50633-charger.c

@@ -393,7 +393,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
 {
 	struct power_supply_config psy_cfg = {};
 	struct pcf50633_mbc *mbc;
-	int ret;
 	int i;
 	u8 mbcs1;
 
@@ -419,8 +418,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
 					     &psy_cfg);
 	if (IS_ERR(mbc->adapter)) {
 		dev_err(mbc->pcf->dev, "failed to register adapter\n");
-		ret = PTR_ERR(mbc->adapter);
-		return ret;
+		return PTR_ERR(mbc->adapter);
 	}
 
 	mbc->usb = power_supply_register(&pdev->dev, &pcf50633_mbc_usb_desc,
@@ -428,8 +426,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
 	if (IS_ERR(mbc->usb)) {
 		dev_err(mbc->pcf->dev, "failed to register usb\n");
 		power_supply_unregister(mbc->adapter);
-		ret = PTR_ERR(mbc->usb);
-		return ret;
+		return PTR_ERR(mbc->usb);
 	}
 
 	mbc->ac = power_supply_register(&pdev->dev, &pcf50633_mbc_ac_desc,
@@ -438,12 +435,10 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
 		dev_err(mbc->pcf->dev, "failed to register ac\n");
 		power_supply_unregister(mbc->adapter);
 		power_supply_unregister(mbc->usb);
-		ret = PTR_ERR(mbc->ac);
-		return ret;
+		return PTR_ERR(mbc->ac);
 	}
 
-	ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
-	if (ret)
+	if (sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group))
 		dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
 
 	mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);

drivers/power/supply/qcom_smbb.c

@@ -35,6 +35,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/extcon.h>
+#include <linux/regulator/driver.h>
 
 #define SMBB_CHG_VMAX		0x040
 #define SMBB_CHG_VSAFE		0x041
@@ -72,6 +73,8 @@
 #define BTC_CTRL_HOT_EXT_N	BIT(0)
 
 #define SMBB_USB_IMAX		0x344
+#define SMBB_USB_OTG_CTL	0x348
+#define OTG_CTL_EN		BIT(0)
 #define SMBB_USB_ENUM_TIMER_STOP 0x34e
 #define ENUM_TIMER_STOP		BIT(0)
 #define SMBB_USB_SEC_ACCESS	0x3d0
@@ -125,6 +128,9 @@ struct smbb_charger {
 	struct power_supply *dc_psy;
 	struct power_supply *bat_psy;
 	struct regmap *regmap;
+
+	struct regulator_desc otg_rdesc;
+	struct regulator_dev *otg_reg;
 };
 
 static const unsigned int smbb_usb_extcon_cable[] = {
@@ -378,7 +384,7 @@ static irqreturn_t smbb_usb_valid_handler(int irq, void *_data)
 	struct smbb_charger *chg = _data;
 
 	smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID);
-	extcon_set_cable_state_(chg->edev, EXTCON_USB,
+	extcon_set_state_sync(chg->edev, EXTCON_USB,
 				chg->status & STATUS_USBIN_VALID);
 	power_supply_changed(chg->usb_psy);
 
@@ -787,12 +793,56 @@ static const struct power_supply_desc dc_psy_desc = {
 	.property_is_writeable = smbb_charger_writable_property,
 };
 
+static int smbb_chg_otg_enable(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	int rc;
+
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+				OTG_CTL_EN, OTG_CTL_EN);
+	if (rc)
+		dev_err(chg->dev, "failed to update OTG_CTL\n");
+	return rc;
+}
+
+static int smbb_chg_otg_disable(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	int rc;
+
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+				OTG_CTL_EN, 0);
+	if (rc)
+		dev_err(chg->dev, "failed to update OTG_CTL\n");
+	return rc;
+}
+
+static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	unsigned int value = 0;
+	int rc;
+
+	rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value);
+	if (rc)
+		dev_err(chg->dev, "failed to read OTG_CTL\n");
+
+	return !!(value & OTG_CTL_EN);
+}
+
+static const struct regulator_ops smbb_chg_otg_ops = {
+	.enable = smbb_chg_otg_enable,
+	.disable = smbb_chg_otg_disable,
+	.is_enabled = smbb_chg_otg_is_enabled,
+};
+
 static int smbb_charger_probe(struct platform_device *pdev)
 {
 	struct power_supply_config bat_cfg = {};
 	struct power_supply_config usb_cfg = {};
 	struct power_supply_config dc_cfg = {};
 	struct smbb_charger *chg;
+	struct regulator_config config = { };
 	int rc, i;
 
 	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
@@ -905,6 +955,26 @@ static int smbb_charger_probe(struct platform_device *pdev)
 		}
 	}
 
+	/*
+	 * otg regulator is used to control VBUS voltage direction
+	 * when USB switches between host and gadget mode
+	 */
+	chg->otg_rdesc.id = -1;
+	chg->otg_rdesc.name = "otg-vbus";
+	chg->otg_rdesc.ops = &smbb_chg_otg_ops;
+	chg->otg_rdesc.owner = THIS_MODULE;
+	chg->otg_rdesc.type = REGULATOR_VOLTAGE;
+	chg->otg_rdesc.supply_name = "usb-otg-in";
+	chg->otg_rdesc.of_match = "otg-vbus";
+
+	config.dev = &pdev->dev;
+	config.driver_data = chg;
+
+	chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc,
+					       &config);
+	if (IS_ERR(chg->otg_reg))
+		return PTR_ERR(chg->otg_reg);
+
 	chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node,
 			"qcom,jeita-extended-temp-range");
 

drivers/power/supply/wm97xx_battery.c

@@ -175,11 +175,6 @@ static int wm97xx_bat_probe(struct platform_device *dev)
 	if (dev->id != -1)
 		return -EINVAL;
 
-	if (!pdata) {
-		dev_err(&dev->dev, "No platform_data supplied\n");
-		return -EINVAL;
-	}
-
 	if (gpio_is_valid(pdata->charge_gpio)) {
 		ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
 		if (ret)

include/linux/mfd/axp20x.h

@@ -13,7 +13,7 @@
 
 #include <linux/regmap.h>
 
-enum {
+enum axp20x_variants {
 	AXP152_ID = 0,
 	AXP202_ID,
 	AXP209_ID,
@@ -532,35 +532,6 @@ struct axp20x_dev {
 	const struct regmap_irq_chip	*regmap_irq_chip;
 };
 
-#define BATTID_LEN				64
-#define OCV_CURVE_SIZE			32
-#define MAX_THERM_CURVE_SIZE	25
-#define PD_DEF_MIN_TEMP			0
-#define PD_DEF_MAX_TEMP			55
-
-struct axp20x_fg_pdata {
-	char battid[BATTID_LEN + 1];
-	int design_cap;
-	int min_volt;
-	int max_volt;
-	int max_temp;
-	int min_temp;
-	int cap1;
-	int cap0;
-	int rdc1;
-	int rdc0;
-	int ocv_curve[OCV_CURVE_SIZE];
-	int tcsz;
-	int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
-};
-
-struct axp20x_chrg_pdata {
-	int max_cc;
-	int max_cv;
-	int def_cc;
-	int def_cv;
-};
-
 struct axp288_extcon_pdata {
 	/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
 	struct gpio_desc *gpio_mux_cntl;

include/linux/power/bq27xxx_battery.h

@@ -4,8 +4,16 @@
 enum bq27xxx_chip {
 	BQ27000 = 1, /* bq27000, bq27200 */
 	BQ27010, /* bq27010, bq27210 */
-	BQ27500, /* bq27500 */
-	BQ27510, /* bq27510, bq27520 */
+	BQ2750X, /* bq27500 deprecated alias */
+	BQ2751X, /* bq27510, bq27520 deprecated alias */
+	BQ27500, /* bq27500/1 */
+	BQ27510G1, /* bq27510G1 */
+	BQ27510G2, /* bq27510G2 */
+	BQ27510G3, /* bq27510G3 */
+	BQ27520G1, /* bq27520G1 */
+	BQ27520G2, /* bq27520G2 */
+	BQ27520G3, /* bq27520G3 */
+	BQ27520G4, /* bq27520G4 */
 	BQ27530, /* bq27530, bq27531 */
 	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
 	BQ27545, /* bq27545 */

include/soc/at91/at91sam9_ddrsdr.h

@@ -81,6 +81,7 @@
 #define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
 #define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
 #define		AT91_DDRSDRC_CLKFR	(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_LPDDR2_PWOFF	(1 << 3)	/* LPDDR Power Off */
 #define		AT91_DDRSDRC_PASR	(7 << 4)	/* Partial Array Self Refresh */
 #define		AT91_DDRSDRC_TCSR	(3 << 8)	/* Temperature Compensated Self Refresh */
 #define		AT91_DDRSDRC_DS		(3 << 10)	/* Drive Strength */
@@ -96,7 +97,9 @@
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+#define			AT91_DDRSDRC_MD_LPDDR3		5
 #define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
+#define			AT91_DDRSDRC_MD_LPDDR2		7
 #define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
 #define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
 #define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)