Merge branch 'drm-edid-fixes' into drm-core-next

* drm-edid-fixes:
  drm/edid: When checking duplicate standard modes, walked the probed list
  drm/edid: Fix sync polarity for secondary GTF curve
  drm/modes: Fix interlaced mode names
  drm/edid: Add secondary GTF curve support
  drm/edid: Strengthen the algorithm for standard mode codes
  drm/edid: Fix the HDTV hack.
  drm/edid: Extend range-based mode addition for EDID 1.4
  drm/edid: Add test for monitor reduced blanking support.
  drm/edid: Fix preferred mode parse for EDID 1.4
  drm/edid: Remove some silly comments
  drm/edid: Remove arbitrary EDID extension limit
  drm/edid: Add modes for Established Timings III section
  drm/edid: Reshuffle mode list construction to closer match the spec
  drm/edid: Remove a redundant check
  drm/edid: Remove some misleading comments
  drm/edid: Fix secondary block fetch.

drivers/gpu/drm/drm_crtc.c

@@ -34,6 +34,7 @@
 #include "drm.h"
 #include "drmP.h"
 #include "drm_crtc.h"
+#include "drm_edid.h"
 
 struct drm_prop_enum_list {
 	int type;
@@ -2350,7 +2351,7 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 					    struct edid *edid)
 {
 	struct drm_device *dev = connector->dev;
-	int ret = 0;
+	int ret = 0, size;
 
 	if (connector->edid_blob_ptr)
 		drm_property_destroy_blob(dev, connector->edid_blob_ptr);
@@ -2362,7 +2363,9 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 		return ret;
 	}
 
-	connector->edid_blob_ptr = drm_property_create_blob(connector->dev, 128, edid);
+	size = EDID_LENGTH * (1 + edid->extensions);
+	connector->edid_blob_ptr = drm_property_create_blob(connector->dev,
+							    size, edid);
 
 	ret = drm_connector_property_set_value(connector,
 					       dev->mode_config.edid_property,

drivers/gpu/drm/drm_edid.c

@@ -2,6 +2,7 @@
  * Copyright (c) 2006 Luc Verhaegen (quirks list)
  * Copyright (c) 2007-2008 Intel Corporation
  *   Jesse Barnes <jesse.barnes@intel.com>
+ * Copyright 2010 Red Hat, Inc.
  *
  * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
  * FB layer.
@@ -33,10 +34,9 @@
 #include "drmP.h"
 #include "drm_edid.h"
 
-/*
- * TODO:
- *   - support EDID 1.4 (incl. CE blocks)
- */
+#define EDID_EST_TIMINGS 16
+#define EDID_STD_TIMINGS 8
+#define EDID_DETAILED_TIMINGS 4
 
 /*
  * EDID blocks out in the wild have a variety of bugs, try to collect
@@ -65,7 +65,8 @@
 
 #define LEVEL_DMT	0
 #define LEVEL_GTF	1
-#define LEVEL_CVT	2
+#define LEVEL_GTF2	2
+#define LEVEL_CVT	3
 
 static struct edid_quirk {
 	char *vendor;
@@ -109,25 +110,25 @@ static struct edid_quirk {
 	{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
 };
 
+/*** DDC fetch and block validation ***/
 
-/* Valid EDID header has these bytes */
 static const u8 edid_header[] = {
 	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
 };
 
-/**
- * drm_edid_is_valid - sanity check EDID data
- * @edid: EDID data
- *
- * Sanity check the EDID block by looking at the header, the version number
- * and the checksum.  Return 0 if the EDID doesn't check out, or 1 if it's
- * valid.
+/*
+ * Sanity check the EDID block (base or extension).  Return 0 if the block
+ * doesn't check out, or 1 if it's valid.
  */
-bool drm_edid_is_valid(struct edid *edid)
+static bool
+drm_edid_block_valid(u8 *raw_edid)
 {
-	int i, score = 0;
+	int i;
 	u8 csum = 0;
-	u8 *raw_edid = (u8 *)edid;
+	struct edid *edid = (struct edid *)raw_edid;
+
+	if (raw_edid[0] == 0x00) {
+		int score = 0;
 
 		for (i = 0; i < sizeof(edid_header); i++)
 			if (raw_edid[i] == edid_header[i])
@@ -137,8 +138,10 @@ bool drm_edid_is_valid(struct edid *edid)
 		else if (score >= 6) {
 			DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
 			memcpy(raw_edid, edid_header, sizeof(edid_header));
-	} else
+		} else {
 			goto bad;
+		}
+	}
 
 	for (i = 0; i < EDID_LENGTH; i++)
 		csum += raw_edid[i];
@@ -147,6 +150,9 @@ bool drm_edid_is_valid(struct edid *edid)
 		goto bad;
 	}
 
+	/* per-block-type checks */
+	switch (raw_edid[0]) {
+	case 0: /* base */
 		if (edid->version != 1) {
 			DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
 			goto bad;
@@ -154,6 +160,11 @@ bool drm_edid_is_valid(struct edid *edid)
 
 		if (edid->revision > 4)
 			DRM_DEBUG("EDID minor > 4, assuming backward compatibility\n");
+		break;
+
+	default:
+		break;
+	}
 
 	return 1;
 
@@ -165,8 +176,158 @@ bool drm_edid_is_valid(struct edid *edid)
 	}
 	return 0;
 }
+
+/**
+ * drm_edid_is_valid - sanity check EDID data
+ * @edid: EDID data
+ *
+ * Sanity-check an entire EDID record (including extensions)
+ */
+bool drm_edid_is_valid(struct edid *edid)
+{
+	int i;
+	u8 *raw = (u8 *)edid;
+
+	if (!edid)
+		return false;
+
+	for (i = 0; i <= edid->extensions; i++)
+		if (!drm_edid_block_valid(raw + i * EDID_LENGTH))
+			return false;
+
+	return true;
+}
 EXPORT_SYMBOL(drm_edid_is_valid);
 
+#define DDC_ADDR 0x50
+#define DDC_SEGMENT_ADDR 0x30
+/**
+ * Get EDID information via I2C.
+ *
+ * \param adapter : i2c device adaptor
+ * \param buf     : EDID data buffer to be filled
+ * \param len     : EDID data buffer length
+ * \return 0 on success or -1 on failure.
+ *
+ * Try to fetch EDID information by calling i2c driver function.
+ */
+static int
+drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
+		      int block, int len)
+{
+	unsigned char start = block * EDID_LENGTH;
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= DDC_ADDR,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &start,
+		}, {
+			.addr	= DDC_ADDR,
+			.flags	= I2C_M_RD,
+			.len	= len,
+			.buf	= buf + start,
+		}
+	};
+
+	if (i2c_transfer(adapter, msgs, 2) == 2)
+		return 0;
+
+	return -1;
+}
+
+static u8 *
+drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+	int i, j = 0;
+	u8 *block, *new;
+
+	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
+		return NULL;
+
+	/* base block fetch */
+	for (i = 0; i < 4; i++) {
+		if (drm_do_probe_ddc_edid(adapter, block, 0, EDID_LENGTH))
+			goto out;
+		if (drm_edid_block_valid(block))
+			break;
+	}
+	if (i == 4)
+		goto carp;
+
+	/* if there's no extensions, we're done */
+	if (block[0x7e] == 0)
+		return block;
+
+	new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
+	if (!new)
+		goto out;
+	block = new;
+
+	for (j = 1; j <= block[0x7e]; j++) {
+		for (i = 0; i < 4; i++) {
+			if (drm_do_probe_ddc_edid(adapter, block, j,
+						  EDID_LENGTH))
+				goto out;
+			if (drm_edid_block_valid(block + j * EDID_LENGTH))
+				break;
+		}
+		if (i == 4)
+			goto carp;
+	}
+
+	return block;
+
+carp:
+	dev_warn(&connector->dev->pdev->dev, "%s: EDID block %d invalid.\n",
+		 drm_get_connector_name(connector), j);
+
+out:
+	kfree(block);
+	return NULL;
+}
+
+/**
+ * Probe DDC presence.
+ *
+ * \param adapter : i2c device adaptor
+ * \return 1 on success
+ */
+static bool
+drm_probe_ddc(struct i2c_adapter *adapter)
+{
+	unsigned char out;
+
+	return (drm_do_probe_ddc_edid(adapter, &out, 0, 1) == 0);
+}
+
+/**
+ * drm_get_edid - get EDID data, if available
+ * @connector: connector we're probing
+ * @adapter: i2c adapter to use for DDC
+ *
+ * Poke the given i2c channel to grab EDID data if possible.  If found,
+ * attach it to the connector.
+ *
+ * Return edid data or NULL if we couldn't find any.
+ */
+struct edid *drm_get_edid(struct drm_connector *connector,
+			  struct i2c_adapter *adapter)
+{
+	struct edid *edid = NULL;
+
+	if (drm_probe_ddc(adapter))
+		edid = (struct edid *)drm_do_get_edid(connector, adapter);
+
+	connector->display_info.raw_edid = (char *)edid;
+
+	return edid;
+
+}
+EXPORT_SYMBOL(drm_get_edid);
+
+/*** EDID parsing ***/
+
 /**
  * edid_vendor - match a string against EDID's obfuscated vendor field
  * @edid: EDID to match
@@ -517,6 +678,110 @@ static struct drm_display_mode *drm_find_dmt(struct drm_device *dev,
 	return mode;
 }
 
+typedef void detailed_cb(struct detailed_timing *timing, void *closure);
+
+static void
+drm_for_each_detailed_block(u8 *raw_edid, detailed_cb *cb, void *closure)
+{
+	int i;
+	struct edid *edid = (struct edid *)raw_edid;
+
+	if (edid == NULL)
+		return;
+
+	for (i = 0; i < EDID_DETAILED_TIMINGS; i++)
+		cb(&(edid->detailed_timings[i]), closure);
+
+	/* XXX extension block walk */
+}
+
+static void
+is_rb(struct detailed_timing *t, void *data)
+{
+	u8 *r = (u8 *)t;
+	if (r[3] == EDID_DETAIL_MONITOR_RANGE)
+		if (r[15] & 0x10)
+			*(bool *)data = true;
+}
+
+/* EDID 1.4 defines this explicitly.  For EDID 1.3, we guess, badly. */
+static bool
+drm_monitor_supports_rb(struct edid *edid)
+{
+	if (edid->revision >= 4) {
+		bool ret;
+		drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
+		return ret;
+	}
+
+	return ((edid->input & DRM_EDID_INPUT_DIGITAL) != 0);
+}
+
+static void
+find_gtf2(struct detailed_timing *t, void *data)
+{
+	u8 *r = (u8 *)t;
+	if (r[3] == EDID_DETAIL_MONITOR_RANGE && r[10] == 0x02)
+		*(u8 **)data = r;
+}
+
+/* Secondary GTF curve kicks in above some break frequency */
+static int
+drm_gtf2_hbreak(struct edid *edid)
+{
+	u8 *r = NULL;
+	drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+	return r ? (r[12] * 2) : 0;
+}
+
+static int
+drm_gtf2_2c(struct edid *edid)
+{
+	u8 *r = NULL;
+	drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+	return r ? r[13] : 0;
+}
+
+static int
+drm_gtf2_m(struct edid *edid)
+{
+	u8 *r = NULL;
+	drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+	return r ? (r[15] << 8) + r[14] : 0;
+}
+
+static int
+drm_gtf2_k(struct edid *edid)
+{
+	u8 *r = NULL;
+	drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+	return r ? r[16] : 0;
+}
+
+static int
+drm_gtf2_2j(struct edid *edid)
+{
+	u8 *r = NULL;
+	drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+	return r ? r[17] : 0;
+}
+
+/**
+ * standard_timing_level - get std. timing level(CVT/GTF/DMT)
+ * @edid: EDID block to scan
+ */
+static int standard_timing_level(struct edid *edid)
+{
+	if (edid->revision >= 2) {
+		if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
+			return LEVEL_CVT;
+		if (drm_gtf2_hbreak(edid))
+			return LEVEL_GTF2;
+		return LEVEL_GTF;
+	}
+	return LEVEL_DMT;
+}
+
 /*
  * 0 is reserved.  The spec says 0x01 fill for unused timings.  Some old
  * monitors fill with ascii space (0x20) instead.
@@ -536,22 +801,20 @@ bad_std_timing(u8 a, u8 b)
  *
  * Take the standard timing params (in this case width, aspect, and refresh)
  * and convert them into a real mode using CVT/GTF/DMT.
- *
- * Punts for now, but should eventually use the FB layer's CVT based mode
- * generation code.
  */
-struct drm_display_mode *drm_mode_std(struct drm_device *dev,
-				      struct std_timing *t,
-				      int revision,
-				      int timing_level)
+static struct drm_display_mode *
+drm_mode_std(struct drm_connector *connector, struct edid *edid,
+	     struct std_timing *t, int revision)
 {
-	struct drm_display_mode *mode;
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *m, *mode = NULL;
 	int hsize, vsize;
 	int vrefresh_rate;
 	unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK)
 		>> EDID_TIMING_ASPECT_SHIFT;
 	unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
 		>> EDID_TIMING_VFREQ_SHIFT;
+	int timing_level = standard_timing_level(edid);
 
 	if (bad_std_timing(t->hsize, t->vfreq_aspect))
 		return NULL;
@@ -572,16 +835,36 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 		vsize = (hsize * 4) / 5;
 	else
 		vsize = (hsize * 9) / 16;
-	/* HDTV hack */
-	if (hsize == 1360 && vsize == 765 && vrefresh_rate == 60) {
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+
+	/* HDTV hack, part 1 */
+	if (vrefresh_rate == 60 &&
+	    ((hsize == 1360 && vsize == 765) ||
+	     (hsize == 1368 && vsize == 769))) {
+		hsize = 1366;
+		vsize = 768;
+	}
+
+	/*
+	 * If this connector already has a mode for this size and refresh
+	 * rate (because it came from detailed or CVT info), use that
+	 * instead.  This way we don't have to guess at interlace or
+	 * reduced blanking.
+	 */
+	list_for_each_entry(m, &connector->probed_modes, head)
+		if (m->hdisplay == hsize && m->vdisplay == vsize &&
+		    drm_mode_vrefresh(m) == vrefresh_rate)
+			return NULL;
+
+	/* HDTV hack, part 2 */
+	if (hsize == 1366 && vsize == 768 && vrefresh_rate == 60) {
+		mode = drm_cvt_mode(dev, 1366, 768, vrefresh_rate, 0, 0,
 				    false);
 		mode->hdisplay = 1366;
 		mode->vsync_start = mode->vsync_start - 1;
 		mode->vsync_end = mode->vsync_end - 1;
 		return mode;
 	}
-	mode = NULL;
+
 	/* check whether it can be found in default mode table */
 	mode = drm_find_dmt(dev, hsize, vsize, vrefresh_rate);
 	if (mode)
@@ -593,6 +876,23 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 	case LEVEL_GTF:
 		mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
 		break;
+	case LEVEL_GTF2:
+		/*
+		 * This is potentially wrong if there's ever a monitor with
+		 * more than one ranges section, each claiming a different
+		 * secondary GTF curve.  Please don't do that.
+		 */
+		mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		if (drm_mode_hsync(mode) > drm_gtf2_hbreak(edid)) {
+			kfree(mode);
+			mode = drm_gtf_mode_complex(dev, hsize, vsize,
+						    vrefresh_rate, 0, 0,
+						    drm_gtf2_m(edid),
+						    drm_gtf2_2c(edid),
+						    drm_gtf2_k(edid),
+						    drm_gtf2_2j(edid));
+		}
+		break;
 	case LEVEL_CVT:
 		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
 				    false);
@@ -716,10 +1016,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	if (mode->vsync_end > mode->vtotal)
 		mode->vtotal = mode->vsync_end + 1;
 
-	drm_mode_set_name(mode);
-
 	drm_mode_do_interlace_quirk(mode, pt);
 
+	drm_mode_set_name(mode);
+
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
 		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
 	}
@@ -802,10 +1102,6 @@ static struct drm_display_mode edid_est_modes[] = {
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
 };
 
-#define EDID_EST_TIMINGS 16
-#define EDID_STD_TIMINGS 8
-#define EDID_DETAILED_TIMINGS 4
-
 /**
  * add_established_modes - get est. modes from EDID and add them
  * @edid: EDID block to scan
@@ -833,19 +1129,6 @@ static int add_established_modes(struct drm_connector *connector, struct edid *e
 
 	return modes;
 }
-/**
- * stanard_timing_level - get std. timing level(CVT/GTF/DMT)
- * @edid: EDID block to scan
- */
-static int standard_timing_level(struct edid *edid)
-{
-	if (edid->revision >= 2) {
-		if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
-			return LEVEL_CVT;
-		return LEVEL_GTF;
-	}
-	return LEVEL_DMT;
-}
 
 /**
  * add_standard_modes - get std. modes from EDID and add them
@@ -856,22 +1139,14 @@ static int standard_timing_level(struct edid *edid)
  */
 static int add_standard_modes(struct drm_connector *connector, struct edid *edid)
 {
-	struct drm_device *dev = connector->dev;
 	int i, modes = 0;
-	int timing_level;
-
-	timing_level = standard_timing_level(edid);
 
 	for (i = 0; i < EDID_STD_TIMINGS; i++) {
-		struct std_timing *t = &edid->standard_timings[i];
 		struct drm_display_mode *newmode;
 
-		/* If std timings bytes are 1, 1 it's empty */
-		if (t->hsize == 1 && t->vfreq_aspect == 1)
-			continue;
-
-		newmode = drm_mode_std(dev, &edid->standard_timings[i],
-				       edid->revision, timing_level);
+		newmode = drm_mode_std(connector, edid,
+				       &edid->standard_timings[i],
+				       edid->revision);
 		if (newmode) {
 			drm_mode_probed_add(connector, newmode);
 			modes++;
@@ -881,36 +1156,86 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid
 	return modes;
 }
 
-/*
- * XXX fix this for:
- * - GTF secondary curve formula
- * - EDID 1.4 range offsets
- * - CVT extended bits
- */
 static bool
-mode_in_range(struct drm_display_mode *mode, struct detailed_timing *timing)
+mode_is_rb(struct drm_display_mode *mode)
 {
-	struct detailed_data_monitor_range *range;
-	int hsync, vrefresh;
-
-	range = &timing->data.other_data.data.range;
+	return (mode->htotal - mode->hdisplay == 160) &&
+	       (mode->hsync_end - mode->hdisplay == 80) &&
+	       (mode->hsync_end - mode->hsync_start == 32) &&
+	       (mode->vsync_start - mode->vdisplay == 3);
+}
 
+static bool
+mode_in_hsync_range(struct drm_display_mode *mode, struct edid *edid, u8 *t)
+{
+	int hsync, hmin, hmax;
+
+	hmin = t[7];
+	if (edid->revision >= 4)
+	    hmin += ((t[4] & 0x04) ? 255 : 0);
+	hmax = t[8];
+	if (edid->revision >= 4)
+	    hmax += ((t[4] & 0x08) ? 255 : 0);
 	hsync = drm_mode_hsync(mode);
-	vrefresh = drm_mode_vrefresh(mode);
 
-	if (hsync < range->min_hfreq_khz || hsync > range->max_hfreq_khz)
+	return (hsync <= hmax && hsync >= hmin);
+}
+
+static bool
+mode_in_vsync_range(struct drm_display_mode *mode, struct edid *edid, u8 *t)
+{
+	int vsync, vmin, vmax;
+
+	vmin = t[5];
+	if (edid->revision >= 4)
+	    vmin += ((t[4] & 0x01) ? 255 : 0);
+	vmax = t[6];
+	if (edid->revision >= 4)
+	    vmax += ((t[4] & 0x02) ? 255 : 0);
+	vsync = drm_mode_vrefresh(mode);
+
+	return (vsync <= vmax && vsync >= vmin);
+}
+
+static u32
+range_pixel_clock(struct edid *edid, u8 *t)
+{
+	/* unspecified */
+	if (t[9] == 0 || t[9] == 255)
+		return 0;
+
+	/* 1.4 with CVT support gives us real precision, yay */
+	if (edid->revision >= 4 && t[10] == 0x04)
+		return (t[9] * 10000) - ((t[12] >> 2) * 250);
+
+	/* 1.3 is pathetic, so fuzz up a bit */
+	return t[9] * 10000 + 5001;
+}
+
+static bool
+mode_in_range(struct drm_display_mode *mode, struct edid *edid,
+	      struct detailed_timing *timing)
+{
+	u32 max_clock;
+	u8 *t = (u8 *)timing;
+
+	if (!mode_in_hsync_range(mode, edid, t))
 		return false;
 
-	if (vrefresh < range->min_vfreq || vrefresh > range->max_vfreq)
+	if (!mode_in_vsync_range(mode, edid, t))
 		return false;
 
-	if (range->pixel_clock_mhz && range->pixel_clock_mhz != 0xff) {
-		/* be forgiving since it's in units of 10MHz */
-		int max_clock = range->pixel_clock_mhz * 10 + 9;
-		max_clock *= 1000;
+	if ((max_clock = range_pixel_clock(edid, t)))
 		if (mode->clock > max_clock)
 			return false;
-	}
+
+	/* 1.4 max horizontal check */
+	if (edid->revision >= 4 && t[10] == 0x04)
+		if (t[13] && mode->hdisplay > 8 * (t[13] + (256 * (t[12]&0x3))))
+			return false;
+
+	if (mode_is_rb(mode) && !drm_monitor_supports_rb(edid))
+		return false;
 
 	return true;
 }
@@ -919,7 +1244,8 @@ mode_in_range(struct drm_display_mode *mode, struct detailed_timing *timing)
  * XXX If drm_dmt_modes ever regrows the CVT-R modes (and it will) this will
  * need to account for them.
  */
-static int drm_gtf_modes_for_range(struct drm_connector *connector,
+static int
+drm_gtf_modes_for_range(struct drm_connector *connector, struct edid *edid,
 			struct detailed_timing *timing)
 {
 	int i, modes = 0;
@@ -927,7 +1253,7 @@ static int drm_gtf_modes_for_range(struct drm_connector *connector,
 	struct drm_device *dev = connector->dev;
 
 	for (i = 0; i < drm_num_dmt_modes; i++) {
-		if (mode_in_range(drm_dmt_modes + i, timing)) {
+		if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
 			newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
 			if (newmode) {
 				drm_mode_probed_add(connector, newmode);
@@ -988,13 +1314,100 @@ static int drm_cvt_modes(struct drm_connector *connector,
 	return modes;
 }
 
+static const struct {
+	short w;
+	short h;
+	short r;
+	short rb;
+} est3_modes[] = {
+	/* byte 6 */
+	{ 640, 350, 85, 0 },
+	{ 640, 400, 85, 0 },
+	{ 720, 400, 85, 0 },
+	{ 640, 480, 85, 0 },
+	{ 848, 480, 60, 0 },
+	{ 800, 600, 85, 0 },
+	{ 1024, 768, 85, 0 },
+	{ 1152, 864, 75, 0 },
+	/* byte 7 */
+	{ 1280, 768, 60, 1 },
+	{ 1280, 768, 60, 0 },
+	{ 1280, 768, 75, 0 },
+	{ 1280, 768, 85, 0 },
+	{ 1280, 960, 60, 0 },
+	{ 1280, 960, 85, 0 },
+	{ 1280, 1024, 60, 0 },
+	{ 1280, 1024, 85, 0 },
+	/* byte 8 */
+	{ 1360, 768, 60, 0 },
+	{ 1440, 900, 60, 1 },
+	{ 1440, 900, 60, 0 },
+	{ 1440, 900, 75, 0 },
+	{ 1440, 900, 85, 0 },
+	{ 1400, 1050, 60, 1 },
+	{ 1400, 1050, 60, 0 },
+	{ 1400, 1050, 75, 0 },
+	/* byte 9 */
+	{ 1400, 1050, 85, 0 },
+	{ 1680, 1050, 60, 1 },
+	{ 1680, 1050, 60, 0 },
+	{ 1680, 1050, 75, 0 },
+	{ 1680, 1050, 85, 0 },
+	{ 1600, 1200, 60, 0 },
+	{ 1600, 1200, 65, 0 },
+	{ 1600, 1200, 70, 0 },
+	/* byte 10 */
+	{ 1600, 1200, 75, 0 },
+	{ 1600, 1200, 85, 0 },
+	{ 1792, 1344, 60, 0 },
+	{ 1792, 1344, 85, 0 },
+	{ 1856, 1392, 60, 0 },
+	{ 1856, 1392, 75, 0 },
+	{ 1920, 1200, 60, 1 },
+	{ 1920, 1200, 60, 0 },
+	/* byte 11 */
+	{ 1920, 1200, 75, 0 },
+	{ 1920, 1200, 85, 0 },
+	{ 1920, 1440, 60, 0 },
+	{ 1920, 1440, 75, 0 },
+};
+static const int num_est3_modes = sizeof(est3_modes) / sizeof(est3_modes[0]);
+
+static int
+drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
+{
+	int i, j, m, modes = 0;
+	struct drm_display_mode *mode;
+	u8 *est = ((u8 *)timing) + 5;
+
+	for (i = 0; i < 6; i++) {
+		for (j = 7; j > 0; j--) {
+			m = (i * 8) + (7 - j);
+			if (m > num_est3_modes)
+				break;
+			if (est[i] & (1 << j)) {
+				mode = drm_find_dmt(connector->dev,
+						    est3_modes[m].w,
+						    est3_modes[m].h,
+						    est3_modes[m].r
+						    /*, est3_modes[m].rb */);
+				if (mode) {
+					drm_mode_probed_add(connector, mode);
+					modes++;
+				}
+			}
+		}
+	}
+
+	return modes;
+}
+
 static int add_detailed_modes(struct drm_connector *connector,
 			      struct detailed_timing *timing,
 			      struct edid *edid, u32 quirks, int preferred)
 {
 	int i, modes = 0;
 	struct detailed_non_pixel *data = &timing->data.other_data;
-	int timing_level = standard_timing_level(edid);
 	int gtf = (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF);
 	struct drm_display_mode *newmode;
 	struct drm_device *dev = connector->dev;
@@ -1015,7 +1428,8 @@ static int add_detailed_modes(struct drm_connector *connector,
 	switch (data->type) {
 	case EDID_DETAIL_MONITOR_RANGE:
 		if (gtf)
-			modes += drm_gtf_modes_for_range(connector, timing);
+			modes += drm_gtf_modes_for_range(connector, edid,
+							 timing);
 		break;
 	case EDID_DETAIL_STD_MODES:
 		/* Six modes per detailed section */
@@ -1024,8 +1438,8 @@ static int add_detailed_modes(struct drm_connector *connector,
 			struct drm_display_mode *newmode;
 
 			std = &data->data.timings[i];
-			newmode = drm_mode_std(dev, std, edid->revision,
-					       timing_level);
+			newmode = drm_mode_std(connector, edid, std,
+					       edid->revision);
 			if (newmode) {
 				drm_mode_probed_add(connector, newmode);
 				modes++;
@@ -1035,6 +1449,9 @@ static int add_detailed_modes(struct drm_connector *connector,
 	case EDID_DETAIL_CVT_3BYTE:
 		modes += drm_cvt_modes(connector, timing);
 		break;
+	case EDID_DETAIL_EST_TIMINGS:
+		modes += drm_est3_modes(connector, timing);
+		break;
 	default:
 		break;
 	}
@@ -1058,7 +1475,10 @@ static int add_detailed_info(struct drm_connector *connector,
 
 	for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
 		struct detailed_timing *timing = &edid->detailed_timings[i];
-		int preferred = (i == 0) && (edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING);
+		int preferred = (i == 0);
+
+		if (preferred && edid->version == 1 && edid->revision < 4)
+			preferred = (edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING);
 
 		/* In 1.0, only timings are allowed */
 		if (!timing->pixel_clock && edid->version == 1 &&
@@ -1088,39 +1508,23 @@ static int add_detailed_info_eedid(struct drm_connector *connector,
 	int i, modes = 0;
 	char *edid_ext = NULL;
 	struct detailed_timing *timing;
-	int edid_ext_num;
 	int start_offset, end_offset;
 	int timing_level;
 
-	if (edid->version == 1 && edid->revision < 3) {
-		/* If the EDID version is less than 1.3, there is no
-		 * extension EDID.
-		 */
+	if (edid->version == 1 && edid->revision < 3)
 		return 0;
-	}
-	if (!edid->extensions) {
-		/* if there is no extension EDID, it is unnecessary to
-		 * parse the E-EDID to get detailed info
-		 */
+	if (!edid->extensions)
 		return 0;
-	}
-
-	/* Chose real EDID extension number */
-	edid_ext_num = edid->extensions > DRM_MAX_EDID_EXT_NUM ?
-		DRM_MAX_EDID_EXT_NUM : edid->extensions;
 
 	/* Find CEA extension */
-	for (i = 0; i < edid_ext_num; i++) {
+	for (i = 0; i < edid->extensions; i++) {
 		edid_ext = (char *)edid + EDID_LENGTH * (i + 1);
-		/* This block is CEA extension */
 		if (edid_ext[0] == 0x02)
 			break;
 	}
 
-	if (i == edid_ext_num) {
-		/* if there is no additional timing EDID block, return */
+	if (i == edid->extensions)
 		return 0;
-	}
 
 	/* Get the start offset of detailed timing block */
 	start_offset = edid_ext[2];
@@ -1144,123 +1548,6 @@ static int add_detailed_info_eedid(struct drm_connector *connector,
 	return modes;
 }
 
-#define DDC_ADDR 0x50
-/**
- * Get EDID information via I2C.
- *
- * \param adapter : i2c device adaptor
- * \param buf     : EDID data buffer to be filled
- * \param len     : EDID data buffer length
- * \return 0 on success or -1 on failure.
- *
- * Try to fetch EDID information by calling i2c driver function.
- */
-int drm_do_probe_ddc_edid(struct i2c_adapter *adapter,
-			  unsigned char *buf, int len)
-{
-	unsigned char start = 0x0;
-	struct i2c_msg msgs[] = {
-		{
-			.addr	= DDC_ADDR,
-			.flags	= 0,
-			.len	= 1,
-			.buf	= &start,
-		}, {
-			.addr	= DDC_ADDR,
-			.flags	= I2C_M_RD,
-			.len	= len,
-			.buf	= buf,
-		}
-	};
-
-	if (i2c_transfer(adapter, msgs, 2) == 2)
-		return 0;
-
-	return -1;
-}
-EXPORT_SYMBOL(drm_do_probe_ddc_edid);
-
-static int drm_ddc_read_edid(struct drm_connector *connector,
-			     struct i2c_adapter *adapter,
-			     char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < 4; i++) {
-		if (drm_do_probe_ddc_edid(adapter, buf, len))
-			return -1;
-		if (drm_edid_is_valid((struct edid *)buf))
-			return 0;
-	}
-
-	/* repeated checksum failures; warn, but carry on */
-	dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
-		 drm_get_connector_name(connector));
-	return -1;
-}
-
-/**
- * drm_get_edid - get EDID data, if available
- * @connector: connector we're probing
- * @adapter: i2c adapter to use for DDC
- *
- * Poke the given connector's i2c channel to grab EDID data if possible.
- *
- * Return edid data or NULL if we couldn't find any.
- */
-struct edid *drm_get_edid(struct drm_connector *connector,
-			  struct i2c_adapter *adapter)
-{
-	int ret;
-	struct edid *edid;
-
-	edid = kmalloc(EDID_LENGTH * (DRM_MAX_EDID_EXT_NUM + 1),
-		       GFP_KERNEL);
-	if (edid == NULL) {
-		dev_warn(&connector->dev->pdev->dev,
-			 "Failed to allocate EDID\n");
-		goto end;
-	}
-
-	/* Read first EDID block */
-	ret = drm_ddc_read_edid(connector, adapter,
-				(unsigned char *)edid, EDID_LENGTH);
-	if (ret != 0)
-		goto clean_up;
-
-	/* There are EDID extensions to be read */
-	if (edid->extensions != 0) {
-		int edid_ext_num = edid->extensions;
-
-		if (edid_ext_num > DRM_MAX_EDID_EXT_NUM) {
-			dev_warn(&connector->dev->pdev->dev,
-				 "The number of extension(%d) is "
-				 "over max (%d), actually read number (%d)\n",
-				 edid_ext_num, DRM_MAX_EDID_EXT_NUM,
-				 DRM_MAX_EDID_EXT_NUM);
-			/* Reset EDID extension number to be read */
-			edid_ext_num = DRM_MAX_EDID_EXT_NUM;
-		}
-		/* Read EDID including extensions too */
-		ret = drm_ddc_read_edid(connector, adapter, (char *)edid,
-					EDID_LENGTH * (edid_ext_num + 1));
-		if (ret != 0)
-			goto clean_up;
-
-	}
-
-	connector->display_info.raw_edid = (char *)edid;
-	goto end;
-
-clean_up:
-	kfree(edid);
-	edid = NULL;
-end:
-	return edid;
-
-}
-EXPORT_SYMBOL(drm_get_edid);
-
 #define HDMI_IDENTIFIER 0x000C03
 #define VENDOR_BLOCK    0x03
 /**
@@ -1273,7 +1560,7 @@ EXPORT_SYMBOL(drm_get_edid);
 bool drm_detect_hdmi_monitor(struct edid *edid)
 {
 	char *edid_ext = NULL;
-	int i, hdmi_id, edid_ext_num;
+	int i, hdmi_id;
 	int start_offset, end_offset;
 	bool is_hdmi = false;
 
@@ -1281,19 +1568,15 @@ bool drm_detect_hdmi_monitor(struct edid *edid)
 	if (edid == NULL || edid->extensions == 0)
 		goto end;
 
-	/* Chose real EDID extension number */
-	edid_ext_num = edid->extensions > DRM_MAX_EDID_EXT_NUM ?
-		       DRM_MAX_EDID_EXT_NUM : edid->extensions;
-
 	/* Find CEA extension */
-	for (i = 0; i < edid_ext_num; i++) {
+	for (i = 0; i < edid->extensions; i++) {
 		edid_ext = (char *)edid + EDID_LENGTH * (i + 1);
 		/* This block is CEA extension */
 		if (edid_ext[0] == 0x02)
 			break;
 	}
 
-	if (i == edid_ext_num)
+	if (i == edid->extensions)
 		goto end;
 
 	/* Data block offset in CEA extension block */
@@ -1348,10 +1631,24 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 
 	quirks = edid_get_quirks(edid);
 
-	num_modes += add_established_modes(connector, edid);
-	num_modes += add_standard_modes(connector, edid);
+	/*
+	 * EDID spec says modes should be preferred in this order:
+	 * - preferred detailed mode
+	 * - other detailed modes from base block
+	 * - detailed modes from extension blocks
+	 * - CVT 3-byte code modes
+	 * - standard timing codes
+	 * - established timing codes
+	 * - modes inferred from GTF or CVT range information
+	 *
+	 * We don't quite implement this yet, but we're close.
+	 *
+	 * XXX order for additional mode types in extension blocks?
+	 */
 	num_modes += add_detailed_info(connector, edid, quirks);
 	num_modes += add_detailed_info_eedid(connector, edid, quirks);
+	num_modes += add_standard_modes(connector, edid);
+	num_modes += add_established_modes(connector, edid);
 
 	if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
 		edid_fixup_preferred(connector, quirks);

drivers/gpu/drm/drm_modes.c

@@ -258,8 +258,10 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 	drm_mode->clock -= drm_mode->clock % CVT_CLOCK_STEP;
 	/* 18/16. Find actual vertical frame frequency */
 	/* ignore - just set the mode flag for interlaced */
-	if (interlaced)
+	if (interlaced) {
 		drm_mode->vtotal *= 2;
+		drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;
+	}
 	/* Fill the mode line name */
 	drm_mode_set_name(drm_mode);
 	if (reduced)
@@ -268,43 +270,35 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 	else
 		drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC |
 					DRM_MODE_FLAG_NHSYNC);
-	if (interlaced)
-		drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;
 
 	return drm_mode;
 }
 EXPORT_SYMBOL(drm_cvt_mode);
 
 /**
- * drm_gtf_mode - create the modeline based on GTF algorithm
+ * drm_gtf_mode_complex - create the modeline based on full GTF algorithm
  *
  * @dev		:drm device
  * @hdisplay	:hdisplay size
  * @vdisplay	:vdisplay size
  * @vrefresh	:vrefresh rate.
  * @interlaced	:whether the interlace is supported
- * @margins	:whether the margin is supported
+ * @margins	:desired margin size
+ * @GTF_[MCKJ]  :extended GTF formula parameters
  *
  * LOCKING.
  * none.
  *
- * return the modeline based on GTF algorithm
+ * return the modeline based on full GTF algorithm.
  *
- * This function is to create the modeline based on the GTF algorithm.
- * Generalized Timing Formula is derived from:
- *	GTF Spreadsheet by Andy Morrish (1/5/97)
- *	available at http://www.vesa.org
- *
- * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.
- * What I have done is to translate it by using integer calculation.
- * I also refer to the function of fb_get_mode in the file of
- * drivers/video/fbmon.c
+ * GTF feature blocks specify C and J in multiples of 0.5, so we pass them
+ * in here multiplied by two.  For a C of 40, pass in 80.
  */
-struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
-				      int vdisplay, int vrefresh,
-				      bool interlaced, int margins)
-{
-	/* 1) top/bottom margin size (% of height) - default: 1.8, */
+struct drm_display_mode *
+drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay,
+		     int vrefresh, bool interlaced, int margins,
+		     int GTF_M, int GTF_2C, int GTF_K, int GTF_2J)
+{	/* 1) top/bottom margin size (% of height) - default: 1.8, */
 #define	GTF_MARGIN_PERCENTAGE		18
 	/* 2) character cell horizontal granularity (pixels) - default 8 */
 #define	GTF_CELL_GRAN			8
@@ -316,16 +310,8 @@ struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
 #define H_SYNC_PERCENT			8
 	/* min time of vsync + back porch (microsec) */
 #define MIN_VSYNC_PLUS_BP		550
-	/* blanking formula gradient */
-#define GTF_M				600
-	/* blanking formula offset */
-#define GTF_C				40
-	/* blanking formula scaling factor */
-#define GTF_K				128
-	/* blanking formula scaling factor */
-#define GTF_J				20
 	/* C' and M' are part of the Blanking Duty Cycle computation */
-#define GTF_C_PRIME		(((GTF_C - GTF_J) * GTF_K / 256) + GTF_J)
+#define GTF_C_PRIME	((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2)
 #define GTF_M_PRIME	(GTF_K * GTF_M / 256)
 	struct drm_display_mode *drm_mode;
 	unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd;
@@ -460,17 +446,61 @@ struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
 
 	drm_mode->clock = pixel_freq;
 
-	drm_mode_set_name(drm_mode);
-	drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC;
-
 	if (interlaced) {
 		drm_mode->vtotal *= 2;
 		drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;
 	}
 
+	drm_mode_set_name(drm_mode);
+	if (GTF_M == 600 && GTF_2C == 80 && GTF_K == 128 && GTF_2J == 40)
+		drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC;
+	else
+		drm_mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
+
 	return drm_mode;
 }
+EXPORT_SYMBOL(drm_gtf_mode_complex);
+
+/**
+ * drm_gtf_mode - create the modeline based on GTF algorithm
+ *
+ * @dev		:drm device
+ * @hdisplay	:hdisplay size
+ * @vdisplay	:vdisplay size
+ * @vrefresh	:vrefresh rate.
+ * @interlaced	:whether the interlace is supported
+ * @margins	:whether the margin is supported
+ *
+ * LOCKING.
+ * none.
+ *
+ * return the modeline based on GTF algorithm
+ *
+ * This function is to create the modeline based on the GTF algorithm.
+ * Generalized Timing Formula is derived from:
+ *	GTF Spreadsheet by Andy Morrish (1/5/97)
+ *	available at http://www.vesa.org
+ *
+ * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.
+ * What I have done is to translate it by using integer calculation.
+ * I also refer to the function of fb_get_mode in the file of
+ * drivers/video/fbmon.c
+ *
+ * Standard GTF parameters:
+ * M = 600
+ * C = 40
+ * K = 128
+ * J = 20
+ */
+struct drm_display_mode *
+drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
+	     bool lace, int margins)
+{
+	return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh, lace,
+				    margins, 600, 40 * 2, 128, 20 * 2);
+}
 EXPORT_SYMBOL(drm_gtf_mode);
+
 /**
  * drm_mode_set_name - set the name on a mode
  * @mode: name will be set in this mode
@@ -482,8 +512,11 @@ EXPORT_SYMBOL(drm_gtf_mode);
  */
 void drm_mode_set_name(struct drm_display_mode *mode)
 {
-	snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay,
-		 mode->vdisplay);
+	bool interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+	snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d%s",
+		 mode->hdisplay, mode->vdisplay,
+		 interlaced ? "i" : "");
 }
 EXPORT_SYMBOL(drm_mode_set_name);
 

drivers/gpu/drm/drm_sysfs.c

@@ -333,7 +333,7 @@ static struct device_attribute connector_attrs_opt1[] = {
 static struct bin_attribute edid_attr = {
 	.attr.name = "edid",
 	.attr.mode = 0444,
-	.size = 128,
+	.size = 0,
 	.read = edid_show,
 };
 

drivers/gpu/drm/radeon/radeon_combios.c

@@ -450,17 +450,17 @@ bool radeon_combios_check_hardcoded_edid(struct radeon_device *rdev)
 {
 	int edid_info;
 	struct edid *edid;
+	unsigned char *raw;
 	edid_info = combios_get_table_offset(rdev->ddev, COMBIOS_HARDCODED_EDID_TABLE);
 	if (!edid_info)
 		return false;
 
-	edid = kmalloc(EDID_LENGTH * (DRM_MAX_EDID_EXT_NUM + 1),
-		       GFP_KERNEL);
+	raw = rdev->bios + edid_info;
+	edid = kmalloc(EDID_LENGTH * (raw[0x7e] + 1), GFP_KERNEL);
 	if (edid == NULL)
 		return false;
 
-	memcpy((unsigned char *)edid,
-	       (unsigned char *)(rdev->bios + edid_info), EDID_LENGTH);
+	memcpy((unsigned char *)edid, raw, EDID_LENGTH * (raw[0x7e] + 1));
 
 	if (!drm_edid_is_valid(edid)) {
 		kfree(edid);

include/drm/drm_crtc.h

@@ -666,8 +666,6 @@ extern void drm_fb_release(struct drm_file *file_priv);
 extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
 extern struct edid *drm_get_edid(struct drm_connector *connector,
 				 struct i2c_adapter *adapter);
-extern int drm_do_probe_ddc_edid(struct i2c_adapter *adapter,
-				 unsigned char *buf, int len);
 extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
 extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
 extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode);
@@ -799,6 +797,10 @@ extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
 				bool interlaced, int margins);
+extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
+				int hdisplay, int vdisplay, int vrefresh,
+				bool interlaced, int margins, int GTF_M,
+				int GTF_2C, int GTF_K, int GTF_2J);
 extern int drm_add_modes_noedid(struct drm_connector *connector,
 				int hdisplay, int vdisplay);
 

include/drm/drm_edid.h

@@ -201,7 +201,4 @@ struct edid {
 
 #define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
 
-/* define the number of Extension EDID block */
-#define DRM_MAX_EDID_EXT_NUM 4
-
 #endif /* __DRM_EDID_H__ */