ath9k: use ieee80211_conf on ath9k_hw_iscal_supported()

ath9k_hw_iscal_supported() just needs to be aware of your band
and if HT20 is being used so lets abandon our internal channel,
HT appended values and internal mode values and use ieee80211_conf
which already carries this information. This works as calibration
is being done for the currently configured channel.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath9k/ath9k.h

@@ -949,8 +949,7 @@ void ath9k_hw_ani_detach(struct ath_hal *ah);
 
 /* Calibration */
 
-void ath9k_hw_reset_calvalid(struct ath_hal *ah, struct ath9k_channel *chan,
-			     bool *isCalDone);
+bool ath9k_hw_reset_calvalid(struct ath_hal *ah);
 void ath9k_hw_start_nfcal(struct ath_hal *ah);
 void ath9k_hw_loadnf(struct ath_hal *ah, struct ath9k_channel *chan);
 int16_t ath9k_hw_getnf(struct ath_hal *ah,

drivers/net/wireless/ath9k/calib.c

@@ -277,27 +277,24 @@ static void ath9k_hw_per_calibration(struct ath_hal *ah,
 	}
 }
 
+/* Assumes you are talking about the currently configured channel */
 static bool ath9k_hw_iscal_supported(struct ath_hal *ah,
-				     struct ath9k_channel *chan,
 				     enum hal_cal_types calType)
 {
 	struct ath_hal_5416 *ahp = AH5416(ah);
-	bool retval = false;
+	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
 
 	switch (calType & ahp->ah_suppCals) {
-	case IQ_MISMATCH_CAL:
-		if (!IS_CHAN_B(chan))
-			retval = true;
-		break;
+	case IQ_MISMATCH_CAL: /* Both 2 GHz and 5 GHz support OFDM */
+		return true;
 	case ADC_GAIN_CAL:
 	case ADC_DC_CAL:
-		if (!IS_CHAN_B(chan)
-		    && !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
-			retval = true;
+		if (conf->channel->band == IEEE80211_BAND_5GHZ &&
+		  conf_is_ht20(conf))
+			return true;
 		break;
 	}
-
-	return retval;
+	return false;
 }
 
 static void ath9k_hw_iqcal_collect(struct ath_hal *ah)
@@ -565,50 +562,40 @@ static void ath9k_hw_adc_dccal_calibrate(struct ath_hal *ah, u8 numChains)
 		  AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE);
 }
 
-void ath9k_hw_reset_calvalid(struct ath_hal *ah, struct ath9k_channel *chan,
-			     bool *isCalDone)
+/* This is done for the currently configured channel */
+bool ath9k_hw_reset_calvalid(struct ath_hal *ah)
 {
 	struct ath_hal_5416 *ahp = AH5416(ah);
-	struct ath9k_channel *ichan =
-		ath9k_regd_check_channel(ah, chan);
+	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
 	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
 
-	*isCalDone = true;
+	if (!ah->ah_curchan)
+		return true;
 
 	if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah))
-		return;
+		return true;
 
 	if (currCal == NULL)
-		return;
-
-	if (ichan == NULL) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"invalid channel %u/0x%x; no mapping\n",
-			chan->channel, chan->channelFlags);
-		return;
-	}
-
+		return true;
 
 	if (currCal->calState != CAL_DONE) {
 		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
 			"Calibration state incorrect, %d\n",
 			currCal->calState);
-		return;
+		return true;
 	}
 
-
-	if (!ath9k_hw_iscal_supported(ah, chan, currCal->calData->calType))
-		return;
+	if (!ath9k_hw_iscal_supported(ah, currCal->calData->calType))
+		return true;
 
 	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"Resetting Cal %d state for channel %u/0x%x\n",
-		currCal->calData->calType, chan->channel,
-		chan->channelFlags);
+		"Resetting Cal %d state for channel %u\n",
+		currCal->calData->calType, conf->channel->center_freq);
 
-	ichan->CalValid &= ~currCal->calData->calType;
+	ah->ah_curchan->CalValid &= ~currCal->calData->calType;
 	currCal->calState = CAL_WAITING;
 
-	*isCalDone = false;
+	return false;
 }
 
 void ath9k_hw_start_nfcal(struct ath_hal *ah)
@@ -933,19 +920,19 @@ bool ath9k_hw_init_cal(struct ath_hal *ah,
 	ahp->ah_cal_list = ahp->ah_cal_list_last = ahp->ah_cal_list_curr = NULL;
 
 	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
-		if (ath9k_hw_iscal_supported(ah, chan, ADC_GAIN_CAL)) {
+		if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
 			INIT_CAL(&ahp->ah_adcGainCalData);
 			INSERT_CAL(ahp, &ahp->ah_adcGainCalData);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
 				"enabling ADC Gain Calibration.\n");
 		}
-		if (ath9k_hw_iscal_supported(ah, chan, ADC_DC_CAL)) {
+		if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
 			INIT_CAL(&ahp->ah_adcDcCalData);
 			INSERT_CAL(ahp, &ahp->ah_adcDcCalData);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
 				"enabling ADC DC Calibration.\n");
 		}
-		if (ath9k_hw_iscal_supported(ah, chan, IQ_MISMATCH_CAL)) {
+		if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
 			INIT_CAL(&ahp->ah_iqCalData);
 			INSERT_CAL(ahp, &ahp->ah_iqCalData);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,

drivers/net/wireless/ath9k/main.c

@@ -372,8 +372,7 @@ static void ath_ani_calibrate(unsigned long data)
 	} else {
 		if ((timestamp - sc->sc_ani.sc_resetcal_timer) >=
 		    ATH_RESTART_CALINTERVAL) {
-			ath9k_hw_reset_calvalid(ah, ah->ah_curchan,
-						&sc->sc_ani.sc_caldone);
+			sc->sc_ani.sc_caldone = ath9k_hw_reset_calvalid(ah);
 			if (sc->sc_ani.sc_caldone)
 				sc->sc_ani.sc_resetcal_timer = timestamp;
 		}