Staging: rt28x0: fix some build warnings

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2860/chip/rtmp_phy.h

@@ -552,8 +552,8 @@
 #ifdef RT30xx
 #define RTMP_ASIC_MMPS_DISABLE(_pAd)							\
 	do{															\
-		UCHAR _bbpData;											\
 		UINT32 _macData; \
+		UCHAR _bbpData = 0; \
 		/* disable MMPS BBP control register */						\
 		RTMP_BBP_IO_READ8_BY_REG_ID(_pAd, BBP_R3, &_bbpData);	\
 		_bbpData &= ~(0x04);	/*bit 2*/								\
@@ -568,8 +568,8 @@
 
 #define RTMP_ASIC_MMPS_ENABLE(_pAd)							\
 	do{															\
-		UCHAR _bbpData;											\
 		UINT32 _macData; \
+		UCHAR _bbpData = 0; \
 		/* enable MMPS BBP control register */						\
 		RTMP_BBP_IO_READ8_BY_REG_ID(_pAd, BBP_R3, &_bbpData);	\
 		_bbpData |= (0x04);	/*bit 2*/								\

drivers/staging/rt2860/chips/rt30xx.c

@@ -86,7 +86,9 @@ VOID RT30xxSetRxAnt(
 	IN UCHAR			Ant)
 {
 	UINT32	Value;
+#ifdef RTMP_MAC_PCI
 	UINT32	x;
+#endif
 
 	if ((pAd->EepromAccess) ||
 		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||

drivers/staging/rt2860/common/cmm_asic.c

@@ -810,9 +810,9 @@ VOID AsicSwitchChannel(
 
 #if defined(RT3090) || defined(RT3390)
 		// PCIe PHY Transmit attenuation adjustment
-		if (IS_RT3090A(pAd) || IS_RT3390(pAd))
-		{
-			TX_ATTENUATION_CTRL_STRUC TxAttenuationCtrl = {0};
+		if (IS_RT3090A(pAd) || IS_RT3390(pAd)) {
+			TX_ATTENUATION_CTRL_STRUC
+				TxAttenuationCtrl = { .word = 0 };
 
 			RTMP_IO_READ32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL, &TxAttenuationCtrl.word);
 

drivers/staging/rt2860/common/cmm_mac_pci.c

@@ -1173,10 +1173,9 @@ BOOLEAN RT28xxPciAsicRadioOn(
 	    pAd->Mlme.bPsPollTimerRunning = FALSE;
 		RTMPCancelTimer(&pAd->Mlme.PsPollTimer,	&Cancelled);
 		}
-		if ((pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)&&
-		((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE))
-		||(RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)))
-		{
+		if ((pAd->StaCfg.PSControl.field.EnableNewPS == TRUE &&
+		     (Level == GUIRADIO_OFF || Level == GUI_IDLE_POWER_SAVE)) ||
+		    RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) {
 			// Some chips don't need to delay 6ms, so copy RTMPPCIePowerLinkCtrlRestore
 			// return condition here.
 			/*

drivers/staging/rt2860/common/mlme.c

@@ -679,7 +679,6 @@ VOID MlmePeriodicExec(
 {
 	ULONG			TxTotalCnt;
 	PRTMP_ADAPTER	pAd = (RTMP_ADAPTER *)FunctionContext;
-	SHORT	realavgrssi;
 
 #ifdef RTMP_MAC_PCI
 	{

drivers/staging/rt2860/common/rtmp_init.c

@@ -3621,7 +3621,8 @@ INT RtmpRaDevCtrlInit(
 
 #ifdef RTMP_MAC_USB
 	init_MUTEX(&(pAd->UsbVendorReq_semaphore));
-	os_alloc_mem(pAd, (PUCHAR)&pAd->UsbVendorReqBuf, MAX_PARAM_BUFFER_SIZE - 1);
+	os_alloc_mem(pAd, (PUCHAR *)&pAd->UsbVendorReqBuf,
+		     MAX_PARAM_BUFFER_SIZE - 1);
 	if (pAd->UsbVendorReqBuf == NULL)
 	{
 		DBGPRINT(RT_DEBUG_ERROR, ("Allocate vendor request temp buffer failed!\n"));

drivers/staging/rt2860/common/rtmp_mcu.c

@@ -119,7 +119,9 @@ NDIS_STATUS RtmpAsicLoadFirmware(
 	PUCHAR			pFirmwareImage = NULL;
 	ULONG			FileLength, Index;
 	UINT32			MacReg = 0;
+#ifdef RTMP_MAC_USB
 	UINT32			Version = (pAd->MACVersion >> 16);
+#endif
 
 	// New 8k byte firmware size for RT3071/RT3072
 	{

drivers/staging/rt2860/pci_main_dev.c

@@ -310,7 +310,7 @@ static INT __devinit   rt2860_probe(
 		return rv;
 	}
 
-	print_name = pci_name(pci_dev);
+	print_name = (PSTRING)pci_name(pci_dev);
 
 	if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
 	{
@@ -883,7 +883,7 @@ VOID RTMPPCIeLinkCtrlValueRestore(
 #endif // RT2860 //
 	// Check PSControl Configuration
 	if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
-		return TRUE;
+		return;
 
 	//3090 will not execute the following codes.
 	// Check interface : If not PCIe interface, return.
@@ -977,7 +977,7 @@ VOID RTMPPCIeLinkCtrlSetting(
 #endif // RT2860 //
 	// Check PSControl Configuration
 	if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
-		return TRUE;
+		return;
 
 	// Check interface : If not PCIe interface, return.
 	//Block 3090 to enter the following function
@@ -1086,17 +1086,17 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
 	IN	PRTMP_ADAPTER	pAd)
 {
 
-	ULONG	HostConfiguration;
+	ULONG	HostConfiguration = 0;
 	ULONG	Configuration;
-	ULONG	Vendor;
-	ULONG	offset;
 	POS_COOKIE	pObj;
 	INT     pos;
 	USHORT	reg16;
 
 	pObj = (POS_COOKIE) pAd->OS_Cookie;
 
-	DBGPRINT(RT_DEBUG_INFO, ("RTMPrt3xSetPCIePowerLinkCtrl.===> %x\n", pAd->StaCfg.PSControl.word));
+	DBGPRINT(RT_DEBUG_INFO,
+		 ("RTMPrt3xSetPCIePowerLinkCtrl.===> %lx\n",
+		  pAd->StaCfg.PSControl.word));
 
 	// Check PSControl Configuration
 	if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
@@ -1104,7 +1104,6 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
 	RTMPFindHostPCIDev(pAd);
         if (pObj->parent_pci_dev)
         {
-		USHORT  vendor_id;
 		// Find PCI-to-PCI Bridge Express Capability Offset
 		pos = pci_find_capability(pObj->parent_pci_dev, PCI_CAP_ID_EXP);
 
@@ -1129,7 +1128,10 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
 				// Because in rt30xxForceASPMTest Mode, Force turn on L0s, L1.
 				// Fix HostConfiguration bit0:1 = 0x3 for later use.
 				HostConfiguration = 0x3;
-				DBGPRINT(RT_DEBUG_TRACE, ("PSM : Force ASPM : Host device L1/L0s Value =  0x%x\n", HostConfiguration));
+				DBGPRINT(RT_DEBUG_TRACE,
+					 ("PSM : Force ASPM : "
+					  "Host device L1/L0s Value =  0x%lx\n",
+					  HostConfiguration));
 			}
 		}
 		else if (pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM == 1)
@@ -1141,7 +1143,10 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
 			 PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, HostConfiguration);
 				pAd->Rt3xxHostLinkCtrl = HostConfiguration;
 				HostConfiguration &= 0x3;
-				DBGPRINT(RT_DEBUG_TRACE, ("PSM : Follow Host ASPM : Host device L1/L0s Value =  0x%x\n", HostConfiguration));
+				DBGPRINT(RT_DEBUG_TRACE,
+					 ("PSM : Follow Host ASPM : "
+					  "Host device L1/L0s Value =  0x%lx\n",
+					  HostConfiguration));
 			}
 		}
         }
@@ -1155,7 +1160,9 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
        pAd->RLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
 	pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, &reg16);
         Configuration = le2cpu16(reg16);
-	DBGPRINT(RT_DEBUG_TRACE, ("Read (Ralink PCIe Link Control Register) offset 0x%x = 0x%x\n",
+		DBGPRINT(RT_DEBUG_TRACE,
+			 ("Read (Ralink PCIe Link Control Register) "
+			  "offset 0x%x = 0x%lx\n",
 			  pAd->RLnkCtrlOffset, Configuration));
 		Configuration |= 0x100;
 		if ((pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM == 1)
@@ -1182,7 +1189,9 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
 		reg16 = cpu2le16(Configuration);
 		pci_write_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, reg16);
 		pAd->Rt3xxRalinkLinkCtrl = Configuration;
-		DBGPRINT(RT_DEBUG_TRACE, ("PSM :Write Ralink device L1/L0s Value =  0x%x\n", Configuration));
+		DBGPRINT(RT_DEBUG_TRACE,
+			 ("PSM :Write Ralink device L1/L0s Value =  0x%lx\n",
+			  Configuration));
 	}
 	DBGPRINT(RT_DEBUG_INFO,("PSM :RTMPrt3xSetPCIePowerLinkCtrl <==============\n"));
 }

drivers/staging/rt2860/rt_linux.c

@@ -965,6 +965,7 @@ void send_monitor_packets(
  *******************************************************************************/
 int RtmpOSIRQRequest(IN PNET_DEV pNetDev)
 {
+#ifdef RTMP_PCI_SUPPORT
 	struct net_device *net_dev = pNetDev;
 	PRTMP_ADAPTER pAd = NULL;
 	int retval = 0;
@@ -973,7 +974,6 @@ int RtmpOSIRQRequest(IN PNET_DEV pNetDev)
 
 	ASSERT(pAd);
 
-#ifdef RTMP_PCI_SUPPORT
 	if (pAd->infType == RTMP_DEV_INF_PCI)
 	{
 		POS_COOKIE _pObj = (POS_COOKIE)(pAd->OS_Cookie);
@@ -982,14 +982,13 @@ int RtmpOSIRQRequest(IN PNET_DEV pNetDev)
 		if (retval != 0)
 			printk("RT2860: request_irq  ERROR(%d)\n", retval);
 	}
-#endif // RTMP_PCI_SUPPORT //
-
 
 	return retval;
-
+#else
+	return 0;
+#endif
 }
 
-
 int RtmpOSIRQRelease(IN PNET_DEV pNetDev)
 {
 	struct net_device *net_dev = pNetDev;
@@ -1149,7 +1148,6 @@ NDIS_STATUS RtmpOSTaskAttach(
 	IN void *arg)
 {
 	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
-	pid_t pid_number = -1;
 
 #ifdef KTHREAD_SUPPORT
 	pTask->task_killed = 0;

drivers/staging/rt2860/rt_main_dev.c

@@ -209,15 +209,13 @@ int rt28xx_close(IN PNET_DEV dev)
 	BOOLEAN			Cancelled;
 	UINT32			i = 0;
 
-	GET_PAD_FROM_NET_DEV(pAd, net_dev);
-
 #ifdef RTMP_MAC_USB
 	DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
 	DECLARE_WAITQUEUE(wait, current);
-
-	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
 #endif // RTMP_MAC_USB //
 
+	GET_PAD_FROM_NET_DEV(pAd, net_dev);
+
     DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
 
 	Cancelled = FALSE;

drivers/staging/rt2860/sta/connect.c

@@ -1809,7 +1809,6 @@ VOID LinkDown(
 	IN  BOOLEAN      IsReqFromAP)
 {
 	UCHAR			    i, ByteValue = 0;
-	BOOLEAN		Cancelled;
 
 	// Do nothing if monitor mode is on
 	if (MONITOR_ON(pAd))

drivers/staging/rt2860/usb_main_dev.c

@@ -686,9 +686,10 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER *pAd)
 
 				RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[idx], irqFlags);
 
-
-				printk("%d:%d LTL=%d , TL=%d L:%d\n",idx,pAd->watchDogTxPendingCnt[idx],pAd->TransferedLength[idx]
-					,actual_length,transfer_buffer_length);
+				printk(KERN_INFO "%d:%lu LTL=%d , TL=%d L:%d\n",
+				       idx, pAd->watchDogTxPendingCnt[idx],
+				       pAd->TransferedLength[idx],
+				       actual_length, transfer_buffer_length);
 
 				if (pUrb)
 				{