Commit cb00ec38 authored by John W. Linville's avatar John W. Linville

ath6kl: revert USB support

The ath6kl driver is causing build failures when the ath6kl bits are
not built as modules.  A better fix is forthcoming in a future release,
but for now lets revert the problematic code.

This reverts the following commits:

	fde57764
	d70385a2
	59d954ddSigned-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 00e8e692
config ATH6KL
tristate "Atheros mobile chipsets support"
config ATH6KL_SDIO
tristate "Atheros ath6kl SDIO support"
depends on ATH6KL
tristate "Atheros ath6kl support"
depends on MMC
depends on CFG80211
---help---
This module adds support for wireless adapters based on
Atheros AR6003 and AR6004 chipsets running over SDIO. If you
choose to build it as a module, it will be called ath6kl_sdio.
Please note that AR6002 and AR6001 are not supported by this
driver.
config ATH6KL_USB
tristate "Atheros ath6kl USB support"
depends on ATH6KL
depends on USB
depends on CFG80211
depends on EXPERIMENTAL
---help---
This module adds support for wireless adapters based on
Atheros AR6004 chipset running over USB. This is still under
implementation and it isn't functional. If you choose to
build it as a module, it will be called ath6kl_usb.
Atheros AR6003 chipset running over SDIO. If you choose to
build it as a module, it will be called ath6kl. Pls note
that AR6002 and AR6001 are not supported by this driver.
config ATH6KL_DEBUG
bool "Atheros ath6kl debugging"
......
......@@ -21,30 +21,17 @@
# Author(s): ="Atheros"
#------------------------------------------------------------------------------
obj-$(CONFIG_ATH6KL_SDIO) := ath6kl_sdio.o
ath6kl_sdio-y += debug.o
ath6kl_sdio-y += hif.o
ath6kl_sdio-y += htc.o
ath6kl_sdio-y += bmi.o
ath6kl_sdio-y += cfg80211.o
ath6kl_sdio-y += init.o
ath6kl_sdio-y += main.o
ath6kl_sdio-y += txrx.o
ath6kl_sdio-y += wmi.o
ath6kl_sdio-y += sdio.o
ath6kl_sdio-$(CONFIG_NL80211_TESTMODE) += testmode.o
obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
ath6kl_usb-y += debug.o
ath6kl_usb-y += hif.o
ath6kl_usb-y += htc.o
ath6kl_usb-y += bmi.o
ath6kl_usb-y += cfg80211.o
ath6kl_usb-y += init.o
ath6kl_usb-y += main.o
ath6kl_usb-y += txrx.o
ath6kl_usb-y += wmi.o
ath6kl_usb-y += usb.o
ath6kl_usb-$(CONFIG_NL80211_TESTMODE) += testmode.o
obj-$(CONFIG_ATH6KL) := ath6kl.o
ath6kl-y += debug.o
ath6kl-y += hif.o
ath6kl-y += htc.o
ath6kl-y += bmi.o
ath6kl-y += cfg80211.o
ath6kl-y += init.o
ath6kl-y += main.o
ath6kl-y += txrx.o
ath6kl-y += wmi.o
ath6kl-y += sdio.o
ath6kl-$(CONFIG_NL80211_TESTMODE) += testmode.o
ccflags-y += -D__CHECK_ENDIAN__
......@@ -57,14 +57,8 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
return ret;
}
if (ar->hif_type == ATH6KL_HIF_TYPE_USB) {
ret = ath6kl_hif_bmi_read(ar, (u8 *)targ_info,
sizeof(*targ_info));
} else {
ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
sizeof(targ_info->version));
}
if (ret) {
ath6kl_err("Unable to recv target info: %d\n", ret);
return ret;
......
......@@ -41,7 +41,6 @@ enum ATH6K_DEBUG_MASK {
ATH6KL_DBG_BOOT = BIT(18), /* driver init and fw boot */
ATH6KL_DBG_WMI_DUMP = BIT(19),
ATH6KL_DBG_SUSPEND = BIT(20),
ATH6KL_DBG_USB = BIT(21),
ATH6KL_DBG_ANY = 0xffffffff /* enable all logs */
};
......
......@@ -689,11 +689,6 @@ int ath6kl_hif_setup(struct ath6kl_device *dev)
ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n",
dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr);
/* usb doesn't support enabling interrupts */
/* FIXME: remove check once USB support is implemented */
if (dev->ar->hif_type == ATH6KL_HIF_TYPE_USB)
return 0;
status = ath6kl_hif_disable_intrs(dev);
fail_setup:
......
......@@ -2543,12 +2543,6 @@ int ath6kl_htc_wait_target(struct htc_target *target)
struct htc_service_connect_resp resp;
int status;
/* FIXME: remove once USB support is implemented */
if (target->dev->ar->hif_type == ATH6KL_HIF_TYPE_USB) {
ath6kl_err("HTC doesn't support USB yet. Patience!\n");
return -EOPNOTSUPP;
}
/* we should be getting 1 control message that the target is ready */
packet = htc_wait_for_ctrl_msg(target);
......@@ -2778,8 +2772,6 @@ void ath6kl_htc_cleanup(struct htc_target *target)
{
struct htc_packet *packet, *tmp_packet;
/* FIXME: remove check once USB support is implemented */
if (target->dev->ar->hif_type != ATH6KL_HIF_TYPE_USB)
ath6kl_hif_cleanup_scatter(target->dev->ar);
list_for_each_entry_safe(packet, tmp_packet,
......
......@@ -1332,7 +1332,7 @@ static const struct sdio_device_id ath6kl_sdio_devices[] = {
MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
static struct sdio_driver ath6kl_sdio_driver = {
.name = "ath6kl_sdio",
.name = "ath6kl",
.id_table = ath6kl_sdio_devices,
.probe = ath6kl_sdio_probe,
.remove = ath6kl_sdio_remove,
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment