Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits)
  [POWERPC] Fix rheap alignment problem
  [POWERPC] Use check_legacy_ioport() for ISAPnP
  [POWERPC] Avoid NULL pointer in gpio1_interrupt
  [POWERPC] Enable generic rtc hook for the MPC8349 mITX
  [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class
  [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
  [POWERPC] fix spin lock nesting in hvc_iseries
  [POWERPC] EEH failure to mark pci slot as frozen.
  [POWERPC] update powerpc defconfig files after libata kconfig breakage
  [POWERPC] enable sysrq in pmac32_defconfig
  [POWERPC] UPIO_TSI cleanup
  [POWERPC] rewrite mkprep and mkbugboot in sane C
  [POWERPC] maple/pci iomem annotations
  [POWERPC] powerpc oprofile __user annotations
  [POWERPC] cell spufs iomem annotations
  [POWERPC] NULL noise removal: spufs
  [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c
  [POWERPC] update mpc8349_itx_defconfig and remove some debug settings
  [POWERPC] Always call cede in pseries dedicated idle loop
  [POWERPC] Fix loop logic in irq_alloc_virt()
  ...

arch/powerpc/Makefile

@@ -20,6 +20,7 @@ CROSS32_COMPILE ?=
 CROSS32CC		:= $(CROSS32_COMPILE)gcc
 CROSS32AS		:= $(CROSS32_COMPILE)as
 CROSS32LD		:= $(CROSS32_COMPILE)ld
+CROSS32AR		:= $(CROSS32_COMPILE)ar
 CROSS32OBJCOPY		:= $(CROSS32_COMPILE)objcopy
 
 ifeq ($(HAS_BIARCH),y)
@@ -28,10 +29,11 @@ CROSS32CC	:= $(CC) -m32
 CROSS32AS	:= $(AS) -a32
 CROSS32LD	:= $(LD) -m elf32ppc
 CROSS32OBJCOPY	:= $(OBJCOPY)
+CROSS32AR	:= $(AR)
 endif
 endif
 
-export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY
 
 KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
 
@@ -146,7 +148,7 @@ all: $(KBUILD_IMAGE)
 
 CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
-BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin
+BOOT_TARGETS = zImage zImage.initrd uImage
 
 PHONY += $(BOOT_TARGETS)
 

arch/powerpc/boot/Makefile

@@ -20,33 +20,34 @@
 #	CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
 #	in the toplevel makefile.
 
+all: $(obj)/zImage
 
 HOSTCC		:= gcc
 BOOTCFLAGS	:= $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
 		   $(shell $(CROSS32CC) -print-file-name=include) -fPIC
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
-OBJCOPYFLAGS    := contents,alloc,load,readonly,data
-OBJCOPY_COFF_ARGS := -O aixcoff-rs6000 --set-start 0x500000
-OBJCOPY_MIB_ARGS  := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment
+
+ifeq ($(call cc-option-yn, -fstack-protector),y)
+BOOTCFLAGS	+= -fno-stack-protector
+endif
+
+BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
 
 zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
-#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h)
+$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
+		$(addprefix $(obj)/,$(zlibheader))
+
+src-wlib := string.S stdio.c main.c div64.S $(zlib)
+src-plat := of.c
+src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
 
-src-boot-$(CONFIG_PPC_MULTIPLATFORM) := of.c
-src-boot := crt0.S string.S stdio.c main.c div64.S $(src-boot-y)
-src-boot += $(zlib)
 src-boot := $(addprefix $(obj)/, $(src-boot))
 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
-
-ifeq ($(call cc-option-yn, -fstack-protector),y)
-BOOTCFLAGS	+= -fno-stack-protector
-endif
-
-BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
+obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
+obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
 
 quiet_cmd_copy_zlib = COPY    $@
       cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
@@ -66,8 +67,14 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
 $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
 	$(call cmd,copy_zliblinuxheader)
 
-clean-files := $(zlib) $(zlibheader) $(zliblinuxheader)
+$(obj)/empty.c:
+	@touch $@
+
+$(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S
+	@cp $< $@
 
+clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+		$(obj)/empty.c
 
 quiet_cmd_bootcc = BOOTCC  $@
       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
@@ -75,146 +82,97 @@ quiet_cmd_bootcc = BOOTCC  $@
 quiet_cmd_bootas = BOOTAS  $@
       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 
-quiet_cmd_bootld = BOOTLD  $@
-      cmd_bootld = $(CROSS32LD) -T $(srctree)/$(src)/$(3) -o $@ $(2)
+quiet_cmd_bootar = BOOTAR  $@
+      cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@
 
 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c
 	$(call if_changed_dep,bootcc)
 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S
 	$(call if_changed_dep,bootas)
 
-#-----------------------------------------------------------
-# ELF sections within the zImage bootloader/wrapper
-#-----------------------------------------------------------
-required := vmlinux.strip
-initrd   := initrd
+$(obj)/wrapper.a: $(obj-wlib)
+	$(call cmd,bootar)
 
-obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section)))
-src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section)))
-gz-sec  = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section)))
+hostprogs-y	:= addnote addRamDisk hack-coff
 
-hostprogs-y		:= addnote addRamDisk hack-coff
+extra-y		:= $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
+		   $(obj)/zImage.lds $(obj)/zImage.coff.lds
 
-targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \
-	   zImage.coff zImage.initrd.coff miboot.image miboot.initrd.image \
-	   $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \
-	   $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \
-	   $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \
-	   vmlinux.initrd dummy.o
-extra-y			:= initrd.o
+wrapper		:=$(srctree)/$(src)/wrapper
+wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff)
 
-quiet_cmd_ramdisk = RAMDISK $@
-      cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@
+#############
+# Bits for building various flavours of zImage
 
-quiet_cmd_stripvm = STRIP   $@
-      cmd_stripvm = $(STRIP) -s -R .comment $< -o $@
+ifneq ($(CROSS32_COMPILE),)
+CROSSWRAP := -C $(CROSS32_COMPILE)
+else
+ifneq ($(CROSS_COMPILE),)
+CROSSWRAP := -C $(CROSS_COMPILE)
+endif
+endif
 
-vmlinux.strip: vmlinux
-	$(call if_changed,stripvm)
-$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz
-	$(call if_changed,ramdisk)
+quiet_cmd_wrap	= WRAP    $@
+      cmd_wrap	=$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux
+quiet_cmd_wrap_initrd = WRAP    $@
+      cmd_wrap_initrd =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
+				-i $(obj)/ramdisk.image.gz vmlinux
 
-quiet_cmd_addsection = ADDSEC  $@
-      cmd_addsection = $(CROSS32OBJCOPY) $@ \
-		--add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \
-		--set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS)
+$(obj)/zImage.chrp: vmlinux $(wrapperbits)
+	$(call cmd,wrap,chrp)
 
-quiet_cmd_addnote = ADDNOTE $@
-      cmd_addnote = $(obj)/addnote $@
+$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits)
+	$(call cmd,wrap_initrd,chrp)
 
-quiet_cmd_gen-miboot = GEN     $@
-      cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_MIB_ARGS) \
-		       --add-section=$1=$(word 2, $^) $< $@
+$(obj)/zImage.pseries:	vmlinux $(wrapperbits)
+	$(call cmd,wrap,pseries)
 
-quiet_cmd_gencoff = COFF    $@
-      cmd_gencoff = $(OBJCOPY) $(OBJCOPY_COFF_ARGS) $@ && \
-		    $(obj)/hack-coff $@
+$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits)
+	$(call cmd,wrap_initrd,pseries)
 
-$(call gz-sec, $(required)): $(obj)/kernel-%.gz: %
-	$(call if_changed,gzip)
+$(obj)/zImage.pmac: vmlinux $(wrapperbits)
+	$(call cmd,wrap,pmac)
 
-$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz
-	cp -f $(obj)/ramdisk.image.gz $@
+$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits)
+	$(call cmd,wrap_initrd,pmac)
 
-$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz
-	@touch $@
+$(obj)/zImage.coff: vmlinux $(wrapperbits)
+	$(call cmd,wrap,pmaccoff)
 
-$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c
-	$(call if_changed_dep,bootcc)
-	$(call cmd,addsection)
+$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits)
+	$(call cmd,wrap_initrd,pmaccoff)
+
+$(obj)/zImage.miboot: vmlinux $(wrapperbits)
+	$(call cmd,wrap,miboot)
 
-$(obj)/zImage.vmode $(obj)/zImage.coff: obj-boot += $(call obj-sec, $(required))
-$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds
-	$(call cmd,bootld,$(obj-boot),zImage.lds)
+$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
+	$(call cmd,wrap_initrd,miboot)
 
-$(obj)/zImage.initrd.vmode $(obj)/zImage.initrd.coff: obj-boot += $(call obj-sec, $(required) $(initrd))
-$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds
-	$(call cmd,bootld,$(obj-boot),zImage.lds)
+$(obj)/uImage: vmlinux $(wrapperbits)
+	$(call cmd,wrap,uboot)
+
+image-$(CONFIG_PPC_PSERIES)	+= zImage.pseries
+image-$(CONFIG_PPC_MAPLE)	+= zImage.pseries
+image-$(CONFIG_PPC_CELL)	+= zImage.pseries
+image-$(CONFIG_PPC_CHRP)	+= zImage.chrp
+image-$(CONFIG_PPC_PMAC)	+= zImage.pmac
+image-$(CONFIG_DEFAULT_UIMAGE)	+= uImage
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
-coffimage-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.coff
-coffrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.initrd.coff
-mibootimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.image
-mibrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32)  := $(obj)/miboot.initrd.image
-
-$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y) \
-			$(mibootimg-y-y)
-	@cp -f $< $@
-	$(call if_changed,addnote)
-
-$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote \
-			$(coffrdimg-y-y) $(mibrdimg-y-y)
-	@cp -f $< $@
-	$(call if_changed,addnote)
-
-$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) \
-			$(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff
-	$(call cmd,bootld,$(obj-boot),zImage.coff.lds)
-	$(call cmd,gencoff)
-
-$(obj)/zImage.initrd.coff: $(call obj-sec, $(required) $(initrd)) $(obj-boot) \
-			   $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff
-	$(call cmd,bootld,$(obj-boot),zImage.coff.lds)
-	$(call cmd,gencoff)
-
-$(obj)/miboot.image: $(obj)/dummy.o $(obj)/vmlinux.gz
-	$(call cmd,gen-miboot,image)
-
-$(obj)/miboot.initrd.image: $(obj)/miboot.image $(images)/ramdisk.image.gz
-	$(call cmd,gen-miboot,initrd)
-
-#-----------------------------------------------------------
-# build u-boot images
-#-----------------------------------------------------------
-quiet_cmd_mygzip = GZIP $@
-cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@
-
-quiet_cmd_objbin = OBJCOPY $@
-      cmd_objbin = $(OBJCOPY) -O binary $< $@
-
-quiet_cmd_uimage = UIMAGE $@
-      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
-               -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
-               -d $< $@
-
-MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
-targets		+= uImage
-extra-y		+= vmlinux.bin vmlinux.gz
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objbin)
-
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,mygzip)
-
-$(obj)/uImage: $(obj)/vmlinux.gz
-	$(Q)rm -f $@
-	$(call cmd,uimage)
-	@echo -n '  Image: $@ '
-	@if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
-
-install: $(CONFIGURE) $(BOOTIMAGE)
-	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)"
-
-clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip)
+ifeq ($(CONFIG_PPC32),y)
+image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
+endif
+
+initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y))
+
+$(obj)/zImage:		$(addprefix $(obj)/, $(image-y))
+	@rm -f $@; ln $< $@
+$(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
+	@rm -f $@; ln $< $@
+
+install: $(CONFIGURE) $(image-y)
+	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
+
+clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz)
+clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz)

arch/powerpc/boot/dts/mpc8560ads.dts

+/*
+ * MPC8560 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8560ADS";
+	compatible = "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <04ead9a0>;
+			bus-frequency = <13ab6680>;
+			clock-frequency = <312c8040>;
+			32-bit;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 10000000>;
+	};
+
+	soc8560@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <13ab6680>;
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 00 0C 00 00 FD ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 00 0C 00 01 FD ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "85xx";
+			device_type = "pci";
+			reg = <8000 400>;
+			clock-frequency = <3f940aa>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x2 */
+					 1000 0 0 1 40000 31 1
+					 1000 0 0 2 40000 32 1
+					 1000 0 0 3 40000 33 1
+					 1000 0 0 4 40000 34 1
+
+					/* IDSEL 0x3 */
+					 1800 0 0 1 40000 34 1
+					 1800 0 0 2 40000 31 1
+					 1800 0 0 3 40000 32 1
+					 1800 0 0 4 40000 33 1
+
+					/* IDSEL 0x4 */
+					 2000 0 0 1 40000 33 1
+					 2000 0 0 2 40000 34 1
+					 2000 0 0 3 40000 31 1
+					 2000 0 0 4 40000 32 1
+
+					/* IDSEL 0x5  */
+					 2800 0 0 1 40000 32 1
+					 2800 0 0 2 40000 33 1
+					 2800 0 0 3 40000 34 1
+					 2800 0 0 4 40000 31 1
+
+					/* IDSEL 12 */
+					 6000 0 0 1 40000 31 1
+					 6000 0 0 2 40000 32 1
+					 6000 0 0 3 40000 33 1
+					 6000 0 0 4 40000 34 1
+
+					/* IDSEL 13 */
+					 6800 0 0 1 40000 34 1
+					 6800 0 0 2 40000 31 1
+					 6800 0 0 3 40000 32 1
+					 6800 0 0 4 40000 33 1
+
+					/* IDSEL 14*/
+					 7000 0 0 1 40000 33 1
+					 7000 0 0 2 40000 34 1
+					 7000 0 0 3 40000 31 1
+					 7000 0 0 4 40000 32 1
+
+					/* IDSEL 15 */
+					 7800 0 0 1 40000 32 1
+					 7800 0 0 2 40000 33 1
+					 7800 0 0 3 40000 34 1
+					 7800 0 0 4 40000 31 1
+
+					/* IDSEL 18 */
+					 9000 0 0 1 40000 31 1
+					 9000 0 0 2 40000 32 1
+					 9000 0 0 3 40000 33 1
+					 9000 0 0 4 40000 34 1
+
+					/* IDSEL 19 */
+					 9800 0 0 1 40000 34 1
+					 9800 0 0 2 40000 31 1
+					 9800 0 0 3 40000 32 1
+					 9800 0 0 4 40000 33 1
+
+					/* IDSEL 20 */
+					 a000 0 0 1 40000 33 1
+					 a000 0 0 2 40000 34 1
+					 a000 0 0 3 40000 31 1
+					 a000 0 0 4 40000 32 1
+
+					/* IDSEL 21 */
+					 a800 0 0 1 40000 32 1
+					 a800 0 0 2 40000 33 1
+					 a800 0 0 3 40000 34 1
+					 a800 0 0 4 40000 31 1>;
+
+			interrupt-parent = <40000>;
+			interrupts = <42 0>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 01000000>;
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 20100>;
+			built-in;
+			device_type = "open-pic";
+		};
+
+		cpm@e0000000 {
+			linux,phandle = <e0000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "cpm";
+			model = "CPM2";
+			ranges = <0 0 c0000>;
+			reg = <80000 40000>;
+			command-proc = <919c0>;
+			brg-frequency = <9d5b340>;
+
+			pic@90c00 {
+				linux,phandle = <90c00>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <1e 0>;
+				interrupt-parent = <40000>;
+				reg = <90c00 80>;
+				built-in;
+				device_type = "cpm-pic";
+			};
+
+			scc@91a00 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SCC";
+				device-id = <1>;
+				reg = <91a00 20 88000 100>;
+				clock-setup = <00ffffff 0>;
+				rx-clock = <1>;
+				tx-clock = <1>;
+				current-speed = <1c200>;
+				interrupts = <64 1>;
+				interrupt-parent = <90c00>;
+			};
+
+			scc@91a20 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SCC";
+				device-id = <2>;
+				reg = <91a20 20 88100 100>;
+				clock-setup = <ff00ffff 90000>;
+				rx-clock = <2>;
+				tx-clock = <2>;
+				current-speed = <1c200>;
+				interrupts = <65 1>;
+				interrupt-parent = <90c00>;
+			};
+
+			fcc@91320 {
+				device_type = "network";
+				compatible = "fs_enet";
+				model = "FCC";
+				device-id = <2>;
+				reg = <91320 20 88500 100 913a0 30>;
+				mac-address = [ 00 00 0C 00 02 FD ];
+				clock-setup = <ff00ffff 250000>;
+				rx-clock = <15>;
+				tx-clock = <16>;
+				interrupts = <5d 1>;
+				interrupt-parent = <90c00>;
+				phy-handle = <2452002>;
+			};
+
+			fcc@91340 {
+				device_type = "network";
+				compatible = "fs_enet";
+				model = "FCC";
+				device-id = <3>;
+				reg = <91340 20 88600 100 913d0 30>;
+				mac-address = [ 00 00 0C 00 03 FD ];
+				clock-setup = <ffff00ff 3700>;
+				rx-clock = <17>;
+				tx-clock = <18>;
+				interrupts = <5e 1>;
+				interrupt-parent = <90c00>;
+				phy-handle = <2452003>;
+			};
+		};
+	};
+};

arch/powerpc/boot/wrapper

+#!/bin/sh
+
+# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org>
+# This program may be used under the terms of version 2 of the GNU
+# General Public License.
+
+# This script takes a kernel binary and optionally an initrd image
+# and/or a device-tree blob, and creates a bootable zImage for a
+# given platform.
+
+# Options:
+# -o zImage	specify output file
+# -p platform	specify platform (links in $platform.o)
+# -i initrd	specify initrd file
+# -d devtree	specify device-tree blob
+# -s tree.dts	specify device-tree source file (needs dtc installed)
+# -c		cache $kernel.strip.gz (use if present & newer, else make)
+# -C prefix	specify command prefix for cross-building tools
+#		(strip, objcopy, ld)
+# -D dir	specify directory containing data files used by script
+#		(default ./arch/powerpc/boot)
+# -W dir	specify working directory for temporary files (default .)
+
+# defaults
+kernel=
+ofile=zImage
+platform=of
+initrd=
+dtb=
+dts=
+cacheit=
+
+# cross-compilation prefix
+CROSS=
+
+# directory for object and other files used by this script
+object=arch/powerpc/boot
+
+# directory for working files
+tmpdir=.
+
+usage() {
+    echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
+    echo '       [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
+    echo '       [-D datadir] [-W workingdir] [vmlinux]' >&2
+    exit 1
+}
+
+while [ "$#" -gt 0 ]; do
+    case "$1" in
+    -o)
+	shift
+	[ "$#" -gt 0 ] || usage
+	ofile="$1"
+	;;
+    -p)
+	shift
+	[ "$#" -gt 0 ] || usage
+	platform="$1"
+	;;
+    -i)
+	shift
+	[ "$#" -gt 0 ] || usage
+	initrd="$1"
+	;;
+    -d)
+	shift
+	[ "$#" -gt 0 ] || usage
+	dtb="$1"
+	;;
+    -s)
+	shift
+	[ "$#" -gt 0 ] || usage
+	dts="$1"
+	;;
+    -c)
+	cacheit=y
+	;;
+    -C)
+	shift
+	[ "$#" -gt 0 ] || usage
+	CROSS="$1"
+	;;
+    -D)
+	shift
+	[ "$#" -gt 0 ] || usage
+	object="$1"
+	;;
+    -W)
+	shift
+	[ "$#" -gt 0 ] || usage
+	tmpdir="$1"
+	;;
+    -?)
+	usage
+	;;
+    *)
+	[ -z "$kernel" ] || usage
+	kernel="$1"
+	;;
+    esac
+    shift
+done
+
+if [ -n "$dts" ]; then
+    if [ -z "$dtb" ]; then
+	dtb="$platform.dtb"
+    fi
+    dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
+fi
+
+if [ -z "$kernel" ]; then
+    kernel=vmlinux
+fi
+
+platformo=$object/"$platform".o
+lds=$object/zImage.lds
+ext=strip
+objflags=-S
+tmp=$tmpdir/zImage.$$.o
+ksection=.kernel:vmlinux.strip
+isection=.kernel:initrd
+
+case "$platform" in
+pmac|pseries|chrp)
+    platformo=$object/of.o
+    ;;
+pmaccoff)
+    platformo=$object/of.o
+    lds=$object/zImage.coff.lds
+    ;;
+miboot|uboot)
+    # miboot and U-boot want just the bare bits, not an ELF binary
+    ext=bin
+    objflags="-O binary"
+    tmp="$ofile"
+    ksection=image
+    isection=initrd
+    ;;
+esac
+
+vmz="$tmpdir/`basename \"$kernel\"`.$ext"
+if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then
+    ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+    gzip -f -9 "$vmz.$$"
+    if [ -n "$cacheit" ]; then
+	mv -f "$vmz.$$.gz" "$vmz.gz"
+    else
+	vmz="$vmz.$$"
+    fi
+fi
+
+case "$platform" in
+uboot)
+    rm -f "$ofile"
+    version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
+	cut -d' ' -f3`
+    if [ -n "$version" ]; then
+	version="-n Linux-$version"
+    fi
+    mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
+	$version -d "$vmz.gz" "$ofile"
+    if [ -z "$cacheit" ]; then
+	rm -f $vmz.gz
+    fi
+    exit 0
+    ;;
+esac
+
+addsec() {
+    ${CROSS}objcopy $4 $1 \
+	--add-section=$3="$2" \
+	--set-section-flags=$3=contents,alloc,load,readonly,data
+}
+
+addsec $tmp "$vmz.gz" $ksection $object/empty.o
+if [ -z "$cacheit" ]; then
+    rm -f "$vmz.gz"
+fi
+
+if [ -n "$initrd" ]; then
+    addsec $tmp "$initrd" initrd
+fi
+
+if [ -n "$dtb" ]; then
+    addsec $tmp "$dtb" dtb
+fi
+
+if [ "$platform" != "miboot" ]; then
+    ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
+	$object/crt0.o $platformo $tmp $object/wrapper.a
+    rm $tmp
+fi
+
+# post-processing needed for some platforms
+case "$platform" in
+pseries|chrp)
+    $object/addnote "$ofile"
+    ;;
+pmaccoff)
+    ${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile"
+    $object/hack-coff "$ofile"
+    ;;
+esac

arch/powerpc/configs/chrp32_defconfig

@@ -492,7 +492,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set

arch/powerpc/configs/g5_defconfig

@@ -490,23 +490,23 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set

arch/powerpc/configs/iseries_defconfig

@@ -475,7 +475,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set

arch/powerpc/configs/mpc7448_hpc2_defconfig

@@ -413,23 +413,23 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
-CONFIG_SCSI_SATA_MV=y
-# CONFIG_SCSI_SATA_NV is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set

arch/powerpc/configs/mpc834x_itx_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:28:05 2006
+# Linux kernel version: 2.6.18
+# Mon Sep 25 19:41:14 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -21,6 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
@@ -61,25 +62,25 @@ CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -259,7 +260,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -313,6 +313,7 @@ CONFIG_MTD_CHAR=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -464,23 +465,23 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-CONFIG_SCSI_SATA_SIL=y
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -1277,11 +1278,11 @@ CONFIG_PLIST=y
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -1293,15 +1294,15 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
-CONFIG_BOOTX_TEXT=y
-CONFIG_SERIAL_TEXT_DEBUG=y
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1314,6 +1315,8 @@ CONFIG_SERIAL_TEXT_DEBUG=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
@@ -1323,6 +1326,8 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set

arch/powerpc/configs/mpc8560_ads_defconfig

+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18-rc4
+# Fri Aug 11 16:45:05 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_MPIC=y
+CONFIG_CPM2=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC8540_ADS is not set
+CONFIG_MPC8560_ADS=y
+# CONFIG_MPC85xx_CDS is not set
+CONFIG_MPC8560=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_PC_KEYBOARD is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_PCI_DEBUG=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+CONFIG_SERIAL_CPM_SCC2=y
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/powerpc/configs/pmac32_defconfig

@@ -682,7 +682,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -1826,7 +1826,7 @@ CONFIG_OPROFILE=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14

arch/powerpc/configs/ppc64_defconfig

@@ -520,23 +520,23 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set

arch/powerpc/configs/pseries_defconfig

@@ -506,7 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set

arch/powerpc/kernel/irq.c

@@ -777,7 +777,6 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 {
 	unsigned long flags;
 	unsigned int i, j, found = NO_IRQ;
-	unsigned int limit = irq_virq_count - count;
 
 	if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
 		return NO_IRQ;
@@ -794,14 +793,16 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 	/* Look for count consecutive numbers in the allocatable
 	 * (non-legacy) space
 	 */
-	for (i = NUM_ISA_INTERRUPTS; i <= limit; ) {
-		for (j = i; j < (i + count); j++)
-			if (irq_map[j].host != NULL) {
-				i = j + 1;
-				continue;
-			}
-		found = i;
-		break;
+	for (i = NUM_ISA_INTERRUPTS, j = 0; i < irq_virq_count; i++) {
+		if (irq_map[i].host != NULL)
+			j = 0;
+		else
+			j++;
+
+		if (j == count) {
+			found = i - count + 1;
+			break;
+		}
 	}
 	if (found == NO_IRQ) {
 		spin_unlock_irqrestore(&irq_big_lock, flags);

arch/powerpc/kernel/ptrace.c

@@ -526,9 +526,7 @@ static void do_syscall_trace(void)
 
 void do_syscall_trace_enter(struct pt_regs *regs)
 {
-#ifdef CONFIG_PPC64
 	secure_computing(regs->gpr[0]);
-#endif
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE)
 	    && (current->ptrace & PT_PTRACED))
@@ -548,12 +546,8 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
-#ifdef CONFIG_PPC32
-	secure_computing(regs->gpr[0]);
-#endif
-
 	if (unlikely(current->audit_context))
-		audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)
@@ -561,8 +555,3 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 	    && (current->ptrace & PT_PTRACED))
 		do_syscall_trace();
 }
-
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(do_syscall_trace_enter);
-EXPORT_SYMBOL(do_syscall_trace_leave);
-#endif

arch/powerpc/kernel/sysfs.c

@@ -25,8 +25,8 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
-/* default to snooze disabled */
-DEFINE_PER_CPU(unsigned long, smt_snooze_delay);
+/* Time in microseconds we delay before sleeping in the idle loop */
+DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
 static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
 				      size_t count)

arch/powerpc/kernel/time.c

@@ -1041,6 +1041,48 @@ void __init time_init(void)
 	set_dec(tb_ticks_per_jiffy);
 }
 
+#ifdef CONFIG_RTC_CLASS
+static int set_rtc_class_time(struct rtc_time *tm)
+{
+	int err;
+	struct class_device *class_dev =
+		rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+
+	if (class_dev == NULL)
+		return -ENODEV;
+
+	err = rtc_set_time(class_dev, tm);
+
+	rtc_class_close(class_dev);
+
+	return 0;
+}
+
+static void get_rtc_class_time(struct rtc_time *tm)
+{
+	int err;
+	struct class_device *class_dev =
+		rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+
+	if (class_dev == NULL)
+		return;
+
+	err = rtc_read_time(class_dev, tm);
+
+	rtc_class_close(class_dev);
+
+	return;
+}
+
+int __init rtc_class_hookup(void)
+{
+	ppc_md.get_rtc_time = get_rtc_class_time;
+	ppc_md.set_rtc_time = set_rtc_class_time;
+
+	return 0;
+}
+#endif /* CONFIG_RTC_CLASS */
+
 
 #define FEBRUARY	2
 #define	STARTOFTIME	1970

arch/powerpc/lib/Makefile

@@ -14,9 +14,15 @@ endif
 obj-$(CONFIG_PPC64)	+= checksum_64.o copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o \
 			   strcase.o
+obj-$(CONFIG_QUICC_ENGINE) += rheap.o
 obj-$(CONFIG_XMON)	+= sstep.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
 obj-$(CONFIG_DEBUG_KERNEL) += sstep.o
 endif
+
+# Temporary hack until we have migrated to asm-powerpc
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_CPM2)	+= rheap.o
+endif

arch/powerpc/lib/rheap.c

@@ -423,17 +423,21 @@ void *rh_detach_region(rh_info_t * info, void *start, int size)
 	return (void *)s;
 }
 
-void *rh_alloc(rh_info_t * info, int size, const char *owner)
+void *rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner)
 {
 	struct list_head *l;
 	rh_block_t *blk;
 	rh_block_t *newblk;
 	void *start;
 
-	/* Validate size */
-	if (size <= 0)
+	/* Validate size, (must be power of two) */
+	if (size <= 0 || (alignment & (alignment - 1)) != 0)
 		return ERR_PTR(-EINVAL);
 
+	/* given alignment larger that default rheap alignment */
+	if (alignment > info->alignment)
+		size += alignment - 1;
+
 	/* Align to configured alignment */
 	size = (size + (info->alignment - 1)) & ~(info->alignment - 1);
 
@@ -476,15 +480,27 @@ void *rh_alloc(rh_info_t * info, int size, const char *owner)
 
 	attach_taken_block(info, newblk);
 
+	/* for larger alignment return fixed up pointer  */
+	/* this is no problem with the deallocator since */
+	/* we scan for pointers that lie in the blocks   */
+	if (alignment > info->alignment)
+		start = (void *)(((unsigned long)start + alignment - 1) &
+				~(alignment - 1));
+
 	return start;
 }
 
+void *rh_alloc(rh_info_t * info, int size, const char *owner)
+{
+	return rh_alloc_align(info, size, info->alignment, owner);
+}
+
 /* allocate at precisely the given address */
 void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner)
 {
 	struct list_head *l;
 	rh_block_t *blk, *newblk1, *newblk2;
-	unsigned long s, e, m, bs, be;
+	unsigned long s, e, m, bs = 0, be = 0;
 
 	/* Validate size */
 	if (size <= 0)

arch/powerpc/math-emu/Makefile

@@ -11,3 +11,6 @@ obj-$(CONFIG_MATH_EMULATION)	+= fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
 					mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
 					mtfsf.o mtfsfi.o stfiwx.o stfs.o \
 					udivmodti4.o
+
+CFLAGS_fabs.o = -fno-builtin-fabs
+CFLAGS_math.o = -fno-builtin-fabs

arch/powerpc/oprofile/backtrace.c

@@ -11,6 +11,7 @@
 #include <linux/sched.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
+#include <asm/compat.h>
 
 #define STACK_SP(STACK)		*(STACK)
 
@@ -26,8 +27,9 @@
 static unsigned int user_getsp32(unsigned int sp, int is_first)
 {
 	unsigned int stack_frame[2];
+	void __user *p = compat_ptr(sp);
 
-	if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame)))
+	if (!access_ok(VERIFY_READ, p, sizeof(stack_frame)))
 		return 0;
 
 	/*
@@ -35,8 +37,7 @@ static unsigned int user_getsp32(unsigned int sp, int is_first)
 	 * which means that we've done all that we can do from
 	 * interrupt context.
 	 */
-	if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp,
-					sizeof(stack_frame)))
+	if (__copy_from_user_inatomic(stack_frame, p, sizeof(stack_frame)))
 		return 0;
 
 	if (!is_first)
@@ -54,10 +55,10 @@ static unsigned long user_getsp64(unsigned long sp, int is_first)
 {
 	unsigned long stack_frame[3];
 
-	if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame)))
+	if (!access_ok(VERIFY_READ, (void __user *)sp, sizeof(stack_frame)))
 		return 0;
 
-	if (__copy_from_user_inatomic(stack_frame, (void *)sp,
+	if (__copy_from_user_inatomic(stack_frame, (void __user *)sp,
 					sizeof(stack_frame)))
 		return 0;
 

arch/powerpc/platforms/83xx/mpc834x_itx.c

@@ -109,6 +109,10 @@ static int __init mpc834x_itx_probe(void)
 	return 1;
 }
 
+#ifdef CONFIG_RTC_CLASS
+late_initcall(rtc_class_hookup);
+#endif
+
 define_machine(mpc834x_itx) {
 	.name			= "MPC834x ITX",
 	.probe			= mpc834x_itx_probe,

arch/powerpc/platforms/85xx/Kconfig

@@ -11,6 +11,12 @@ config MPC8540_ADS
 	help
 	  This option enables support for the MPC 8540 ADS board
 
+config MPC8560_ADS
+	bool "Freescale MPC8560 ADS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC 8560 ADS board
+
 config MPC85xx_CDS
 	bool "Freescale MPC85xx CDS"
 	select DEFAULT_UIMAGE
@@ -25,6 +31,11 @@ config MPC8540
 	select PPC_INDIRECT_PCI
 	default y if MPC8540_ADS || MPC85xx_CDS
 
+config MPC8560
+	bool
+	select PPC_INDIRECT_PCI
+	default y if MPC8560_ADS
+
 config PPC_INDIRECT_PCI_BE
 	bool
 	depends on PPC_85xx
@@ -34,4 +45,14 @@ config MPIC
 	bool
 	default y
 
+config CPM2
+	bool
+	depends on MPC8560
+	default y
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Motorola.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it.
+
 endmenu

arch/powerpc/platforms/85xx/Makefile

@@ -3,4 +3,5 @@
 #
 obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o

arch/powerpc/platforms/85xx/mpc85xx_ads.c

@@ -32,6 +32,13 @@
 #include <sysdev/fsl_soc.h>
 #include "mpc85xx.h"
 
+#ifdef CONFIG_CPM2
+#include <linux/fs_enet_pd.h>
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+#include <asm/fs_pd.h>
+#endif
+
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
@@ -57,12 +64,29 @@ mpc85xx_pcibios_fixup(void)
 }
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_CPM2
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc,
+			 struct pt_regs *regs)
+{
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq(regs)) >= 0) {
+		generic_handle_irq(cascade_irq, regs);
+	}
+	desc->chip->eoi(irq);
+}
+
+#endif /* CONFIG_CPM2 */
 
 void __init mpc85xx_ads_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
 	struct device_node *np = NULL;
+#ifdef CONFIG_CPM2
+	int irq;
+#endif
 
 	np = of_find_node_by_type(np, "open-pic");
 
@@ -104,11 +128,103 @@ void __init mpc85xx_ads_pic_init(void)
 	mpic_assign_isu(mpic, 14, r.start + 0x10100);
 
 	mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+	/* Setup CPM2 PIC */
+	np = of_find_node_by_type(NULL, "cpm-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+                return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+
+	cpm2_pic_init(np);
+	set_irq_chained_handler(irq, cpm2_cascade);
+#endif
 }
 
 /*
  * Setup the architecture
  */
+#ifdef CONFIG_CPM2
+void init_fcc_ioports(struct fs_platform_info *fpi)
+{
+	struct io_port *io = cpm2_map(im_ioport);
+	int fcc_no = fs_get_fcc_index(fpi->fs_no);
+	int target;
+	u32 tempval;
+
+	switch(fcc_no) {
+	case 1:
+		tempval = in_be32(&io->iop_pdirb);
+		tempval &= ~PB2_DIRB0;
+		tempval |= PB2_DIRB1;
+		out_be32(&io->iop_pdirb, tempval);
+
+		tempval = in_be32(&io->iop_psorb);
+		tempval &= ~PB2_PSORB0;
+		tempval |= PB2_PSORB1;
+		out_be32(&io->iop_psorb, tempval);
+
+		tempval = in_be32(&io->iop_pparb);
+		tempval |= (PB2_DIRB0 | PB2_DIRB1);
+		out_be32(&io->iop_pparb, tempval);
+
+		target = CPM_CLK_FCC2;
+		break;
+	case 2:
+		tempval = in_be32(&io->iop_pdirb);
+		tempval &= ~PB3_DIRB0;
+		tempval |= PB3_DIRB1;
+		out_be32(&io->iop_pdirb, tempval);
+
+		tempval = in_be32(&io->iop_psorb);
+		tempval &= ~PB3_PSORB0;
+		tempval |= PB3_PSORB1;
+		out_be32(&io->iop_psorb, tempval);
+
+		tempval = in_be32(&io->iop_pparb);
+		tempval |= (PB3_DIRB0 | PB3_DIRB1);
+		out_be32(&io->iop_pparb, tempval);
+
+		tempval = in_be32(&io->iop_pdirc);
+		tempval |= PC3_DIRC1;
+		out_be32(&io->iop_pdirc, tempval);
+
+		tempval = in_be32(&io->iop_pparc);
+		tempval |= PC3_DIRC1;
+		out_be32(&io->iop_pparc, tempval);
+
+		target = CPM_CLK_FCC3;
+		break;
+	default:
+		printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
+		return;
+	}
+
+	/* Port C has clocks......  */
+	tempval = in_be32(&io->iop_psorc);
+	tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
+	out_be32(&io->iop_psorc, tempval);
+
+	tempval = in_be32(&io->iop_pdirc);
+	tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
+	out_be32(&io->iop_pdirc, tempval);
+	tempval = in_be32(&io->iop_pparc);
+	tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
+	out_be32(&io->iop_pparc, tempval);
+
+	cpm2_unmap(io);
+
+	/* Configure Serial Interface clock routing.
+	 * First,  clear FCC bits to zero,
+	 * then set the ones we want.
+	 */
+	cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX);
+	cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX);
+}
+#endif
+
 static void __init mpc85xx_ads_setup_arch(void)
 {
 	struct device_node *cpu;
@@ -131,6 +247,10 @@ static void __init mpc85xx_ads_setup_arch(void)
 		of_node_put(cpu);
 	}
 
+#ifdef CONFIG_CPM2
+	cpm2_reset();
+#endif
+
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);

arch/powerpc/platforms/85xx/mpc85xx_ads.h

+/*
+ * MPC85xx ADS board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XXADS_H
+#define __MACH_MPC85XXADS_H
+
+#include <linux/config.h>
+#include <linux/initrd.h>
+#include <sysdev/fsl_soc.h>
+
+#define BCSR_ADDR		((uint)0xf8000000)
+#define BCSR_SIZE		((uint)(32 * 1024))
+
+#ifdef CONFIG_CPM2
+
+#define MPC85xx_CPM_OFFSET	(0x80000)
+
+#define CPM_MAP_ADDR		(get_immrbase() + MPC85xx_CPM_OFFSET)
+#define CPM_IRQ_OFFSET		60
+
+#define SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
+
+/* FCC1 Clock Source Configuration.  These can be
+ * redefined in the board specific file.
+ *    Can only choose from CLK9-12 */
+#define F1_RXCLK       12
+#define F1_TXCLK       11
+
+/* FCC2 Clock Source Configuration.  These can be
+ * redefined in the board specific file.
+ *    Can only choose from CLK13-16 */
+#define F2_RXCLK       13
+#define F2_TXCLK       14
+
+/* FCC3 Clock Source Configuration.  These can be
+ * redefined in the board specific file.
+ *    Can only choose from CLK13-16 */
+#define F3_RXCLK       15
+#define F3_TXCLK       16
+
+#endif	/* CONFIG_CPM2 */
+#endif	/* __MACH_MPC85XXADS_H */

arch/powerpc/platforms/cell/spu_base.c

@@ -538,7 +538,7 @@ static void __iomem * __init map_spe_prop(struct spu *spu,
 
 	const void *p;
 	int proplen;
-	void* ret = NULL;
+	void __iomem *ret = NULL;
 	int err = 0;
 
 	p = get_property(n, name, &proplen);
@@ -562,7 +562,7 @@ static void spu_unmap(struct spu *spu)
 	iounmap(spu->priv2);
 	iounmap(spu->priv1);
 	iounmap(spu->problem);
-	iounmap((u8 __iomem *)spu->local_store);
+	iounmap((__force u8 __iomem *)spu->local_store);
 }
 
 /* This function shall be abstracted for HV platforms */

arch/powerpc/platforms/cell/spufs/file.c

@@ -1342,7 +1342,7 @@ static u64 spufs_id_get(void *data)
 
 	return num;
 }
-DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, 0, "0x%llx\n")
+DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, NULL, "0x%llx\n")
 
 struct tree_descr spufs_dir_contents[] = {
 	{ "mem",  &spufs_mem_fops,  0666, },

arch/powerpc/platforms/cell/spufs/hw_ops.c

@@ -234,7 +234,7 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx)
 
 static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode)
 {
-	struct spu_problem *prob = ctx->spu->problem;
+	struct spu_problem __iomem *prob = ctx->spu->problem;
 	int ret;
 
 	spin_lock_irq(&ctx->spu->register_lock);
@@ -263,7 +263,7 @@ static int spu_hw_send_mfc_command(struct spu_context *ctx,
 					struct mfc_dma_command *cmd)
 {
 	u32 status;
-	struct spu_problem *prob = ctx->spu->problem;
+	struct spu_problem __iomem *prob = ctx->spu->problem;
 
 	spin_lock_irq(&ctx->spu->register_lock);
 	out_be32(&prob->mfc_lsa_W, cmd->lsa);

arch/powerpc/platforms/maple/pci.c

@@ -96,14 +96,14 @@ static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off)
 		1UL;
 }
 
-static unsigned long u3_agp_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose,
 				       u8 bus, u8 dev_fn, u8 offset)
 {
 	unsigned int caddr;
 
 	if (bus == hose->first_busno) {
 		if (dev_fn < (11 << 3))
-			return 0;
+			return NULL;
 		caddr = u3_agp_cfa0(dev_fn, offset);
 	} else
 		caddr = u3_agp_cfa1(bus, dev_fn, offset);
@@ -114,14 +114,14 @@ static unsigned long u3_agp_cfg_access(struct pci_controller* hose,
 	} while (in_le32(hose->cfg_addr) != caddr);
 
 	offset &= 0x07;
-	return ((unsigned long)hose->cfg_data) + offset;
+	return hose->cfg_data + offset;
 }
 
 static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
 			      int offset, int len, u32 *val)
 {
 	struct pci_controller *hose;
-	unsigned long addr;
+	volatile void __iomem *addr;
 
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
@@ -136,13 +136,13 @@ static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
 	 */
 	switch (len) {
 	case 1:
-		*val = in_8((u8 *)addr);
+		*val = in_8(addr);
 		break;
 	case 2:
-		*val = in_le16((u16 *)addr);
+		*val = in_le16(addr);
 		break;
 	default:
-		*val = in_le32((u32 *)addr);
+		*val = in_le32(addr);
 		break;
 	}
 	return PCIBIOS_SUCCESSFUL;
@@ -152,7 +152,7 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
 			       int offset, int len, u32 val)
 {
 	struct pci_controller *hose;
-	unsigned long addr;
+	volatile void __iomem *addr;
 
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
@@ -167,16 +167,16 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
 	 */
 	switch (len) {
 	case 1:
-		out_8((u8 *)addr, val);
-		(void) in_8((u8 *)addr);
+		out_8(addr, val);
+		(void) in_8(addr);
 		break;
 	case 2:
-		out_le16((u16 *)addr, val);
-		(void) in_le16((u16 *)addr);
+		out_le16(addr, val);
+		(void) in_le16(addr);
 		break;
 	default:
-		out_le32((u32 *)addr, val);
-		(void) in_le32((u32 *)addr);
+		out_le32(addr, val);
+		(void) in_le32(addr);
 		break;
 	}
 	return PCIBIOS_SUCCESSFUL;
@@ -198,22 +198,22 @@ static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off)
 	return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL;
 }
 
-static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
 				      u8 bus, u8 devfn, u8 offset)
 {
 	if (bus == hose->first_busno) {
 		if (PCI_SLOT(devfn) == 0)
-			return 0;
-		return ((unsigned long)hose->cfg_data) + u3_ht_cfa0(devfn, offset);
+			return NULL;
+		return hose->cfg_data + u3_ht_cfa0(devfn, offset);
 	} else
-		return ((unsigned long)hose->cfg_data) + u3_ht_cfa1(bus, devfn, offset);
+		return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
 }
 
 static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 			     int offset, int len, u32 *val)
 {
 	struct pci_controller *hose;
-	unsigned long addr;
+	volatile void __iomem *addr;
 
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
@@ -232,13 +232,13 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 	 */
 	switch (len) {
 	case 1:
-		*val = in_8((u8 *)addr);
+		*val = in_8(addr);
 		break;
 	case 2:
-		*val = in_le16((u16 *)addr);
+		*val = in_le16(addr);
 		break;
 	default:
-		*val = in_le32((u32 *)addr);
+		*val = in_le32(addr);
 		break;
 	}
 	return PCIBIOS_SUCCESSFUL;
@@ -248,7 +248,7 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
 			      int offset, int len, u32 val)
 {
 	struct pci_controller *hose;
-	unsigned long addr;
+	volatile void __iomem *addr;
 
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
@@ -266,16 +266,16 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
 	 */
 	switch (len) {
 	case 1:
-		out_8((u8 *)addr, val);
-		(void) in_8((u8 *)addr);
+		out_8(addr, val);
+		(void) in_8(addr);
 		break;
 	case 2:
-		out_le16((u16 *)addr, val);
-		(void) in_le16((u16 *)addr);
+		out_le16(addr, val);
+		(void) in_le16(addr);
 		break;
 	default:
-		out_le32((u32 *)addr, val);
-		(void) in_le32((u32 *)addr);
+		out_le32(addr, val);
+		(void) in_le32(addr);
 		break;
 	}
 	return PCIBIOS_SUCCESSFUL;
@@ -315,7 +315,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	 * the reg address cell, we shall fix that by killing struct
 	 * reg_property and using some accessor functions instead
 	 */
-	hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
+	hose->cfg_data = ioremap(0xf2000000, 0x02000000);
 
 	hose->first_busno = 0;
 	hose->last_busno = 0xef;

arch/powerpc/platforms/pseries/eeh.c

@@ -225,6 +225,7 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
 
 void eeh_mark_slot (struct device_node *dn, int mode_flag)
 {
+	struct pci_dev *dev;
 	dn = find_device_pe (dn);
 
 	/* Back up one, since config addrs might be shared */
@@ -232,6 +233,12 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag)
 		dn = dn->parent;
 
 	PCI_DN(dn)->eeh_mode |= mode_flag;
+
+	/* Mark the pci device too */
+	dev = PCI_DN(dn)->pcidev;
+	if (dev)
+		dev->error_state = pci_channel_io_frozen;
+
 	__eeh_mark_slot (dn->child, mode_flag);
 }
 

arch/powerpc/platforms/pseries/setup.c

@@ -477,7 +477,6 @@ static void pseries_dedicated_idle_sleep(void)
 { 
 	unsigned int cpu = smp_processor_id();
 	unsigned long start_snooze;
-	unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
 
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -490,9 +489,9 @@ static void pseries_dedicated_idle_sleep(void)
 	 * has been checked recently.  If we should poll for a little
 	 * while, do so.
 	 */
-	if (*smt_snooze_delay) {
+	if (__get_cpu_var(smt_snooze_delay)) {
 		start_snooze = get_tb() +
-			*smt_snooze_delay * tb_ticks_per_usec;
+			__get_cpu_var(smt_snooze_delay) * tb_ticks_per_usec;
 		local_irq_enable();
 		set_thread_flag(TIF_POLLING_NRFLAG);
 
@@ -512,24 +511,7 @@ static void pseries_dedicated_idle_sleep(void)
 			goto out;
 	}
 
-	/*
-	 * If not SMT, cede processor.  If CPU is running SMT
-	 * cede if the other thread is not idle, so that it can
-	 * go single-threaded.  If the other thread is idle,
-	 * we ask the hypervisor if it has pending work it
-	 * wants to do and cede if it does.  Otherwise we keep
-	 * polling in order to reduce interrupt latency.
-	 *
-	 * Doing the cede when the other thread is active will
-	 * result in this thread going dormant, meaning the other
-	 * thread gets to run in single-threaded (ST) mode, which
-	 * is slightly faster than SMT mode with this thread at
-	 * very low priority.  The cede enables interrupts, which
-	 * doesn't matter here.
-	 */
-	if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle
-	    || poll_pending() == H_PENDING)
-		cede_processor();
+	cede_processor();
 
 out:
 	HMT_medium();

arch/powerpc/sysdev/Makefile

@@ -17,3 +17,8 @@ ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
 endif
+
+# Temporary hack until we have migrated to asm-powerpc
+ifeq ($(ARCH),powerpc)
+obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
+endif

arch/powerpc/sysdev/cpm2_common.c

+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ *	2.3.99 Updates
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * 	Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+#include <asm/fs_pd.h>
+
+#include <sysdev/fsl_soc.h>
+
+static void cpm2_dpinit(void);
+cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t *cpm2_immr;
+intctl_cpm2_t *cpm2_intctl;
+
+#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
+					   of space for CPM as it is larger
+					   than on PQ2 */
+
+void
+cpm2_reset(void)
+{
+	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	cpm2_intctl = cpm2_map(im_intctl);
+
+	/* Reclaim the DP memory for our use.
+	 */
+	cpm2_dpinit();
+
+	/* Tell everyone where the comm processor resides.
+	 */
+	cpmp = &cpm2_immr->im_cpm;
+}
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks.  The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers).  Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK	(get_brgfreq())
+#define BRG_UART_CLK	(BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	volatile uint	*bp;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	if (brg < 4) {
+		bp = cpm2_map_size(im_brgc1, 16);
+	} else {
+		bp = cpm2_map_size(im_brgc5, 16);
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
+
+	cpm2_unmap(bp);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	volatile uint	*bp;
+
+	if (brg < 4) {
+		bp = cpm2_map_size(im_brgc1, 16);
+	}
+	else {
+		bp = cpm2_map_size(im_brgc5, 16);
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	if (div16)
+		*bp |= CPM_BRG_DIV16;
+
+	cpm2_unmap(bp);
+}
+
+int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int ret = 0;
+	int shift;
+	int i, bits = 0;
+	cpmux_t *im_cpmux;
+	u32 *reg;
+	u32 mask = 7;
+	u8 clk_map [24][3] = {
+		{CPM_CLK_FCC1, CPM_BRG5, 0},
+		{CPM_CLK_FCC1, CPM_BRG6, 1},
+		{CPM_CLK_FCC1, CPM_BRG7, 2},
+		{CPM_CLK_FCC1, CPM_BRG8, 3},
+		{CPM_CLK_FCC1, CPM_CLK9, 4},
+		{CPM_CLK_FCC1, CPM_CLK10, 5},
+		{CPM_CLK_FCC1, CPM_CLK11, 6},
+		{CPM_CLK_FCC1, CPM_CLK12, 7},
+		{CPM_CLK_FCC2, CPM_BRG5, 0},
+		{CPM_CLK_FCC2, CPM_BRG6, 1},
+		{CPM_CLK_FCC2, CPM_BRG7, 2},
+		{CPM_CLK_FCC2, CPM_BRG8, 3},
+		{CPM_CLK_FCC2, CPM_CLK13, 4},
+		{CPM_CLK_FCC2, CPM_CLK14, 5},
+		{CPM_CLK_FCC2, CPM_CLK15, 6},
+		{CPM_CLK_FCC2, CPM_CLK16, 7},
+		{CPM_CLK_FCC3, CPM_BRG5, 0},
+		{CPM_CLK_FCC3, CPM_BRG6, 1},
+		{CPM_CLK_FCC3, CPM_BRG7, 2},
+		{CPM_CLK_FCC3, CPM_BRG8, 3},
+		{CPM_CLK_FCC3, CPM_CLK13, 4},
+		{CPM_CLK_FCC3, CPM_CLK14, 5},
+		{CPM_CLK_FCC3, CPM_CLK15, 6},
+		{CPM_CLK_FCC3, CPM_CLK16, 7}
+		};
+
+	im_cpmux = cpm2_map(im_cpmux);
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &im_cpmux->cmx_scr;
+		shift = 24;
+	case CPM_CLK_SCC2:
+		reg = &im_cpmux->cmx_scr;
+		shift = 16;
+		break;
+	case CPM_CLK_SCC3:
+		reg = &im_cpmux->cmx_scr;
+		shift = 8;
+		break;
+	case CPM_CLK_SCC4:
+		reg = &im_cpmux->cmx_scr;
+		shift = 0;
+		break;
+	case CPM_CLK_FCC1:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 24;
+		break;
+	case CPM_CLK_FCC2:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 16;
+		break;
+	case CPM_CLK_FCC3:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 8;
+		break;
+	default:
+		printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	if (mode == CPM_CLK_RX)
+		shift +=3;
+
+	for (i=0; i<24; i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+	if (i == sizeof(clk_map)/3)
+	    ret = -EINVAL;
+
+	bits <<= shift;
+	mask <<= shift;
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	cpm2_unmap(im_cpmux);
+	return ret;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+static u8* im_dprambase;
+
+static void cpm2_dpinit(void)
+{
+	spin_lock_init(&cpm_dpmem_lock);
+
+	im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+
+	/* initialize the info header */
+	rh_init(&cpm_dpmem_info, 1,
+			sizeof(cpm_boot_dpmem_rh_block) /
+			sizeof(cpm_boot_dpmem_rh_block[0]),
+			cpm_boot_dpmem_rh_block);
+
+	/* Attach the usable dpmem area */
+	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
+	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+	 * varies with the processor and the microcode patches activated.
+	 * But the following should be at least safe.
+	 */
+	rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
+			CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	ret = rh_free(&cpm_dpmem_info, (void *)offset);
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+	rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+	return (void *)(im_dprambase + offset);
+}
+EXPORT_SYMBOL(cpm_dpram_addr);

arch/powerpc/sysdev/cpm2_pic.c

+/*
+ * Platform information definitions.
+ *
+ * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates
+ * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek.
+ *
+ * Author:  Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * 1999-2001 (c) Dan Malek <dan@embeddedalley.com>
+ * 2006 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* The CPM2 internal interrupt controller.  It is usually
+ * the only interrupt controller.
+ * There are two 32-bit registers (high/low) for up to 64
+ * possible interrupts.
+ *
+ * Now, the fun starts.....Interrupt Numbers DO NOT MAP
+ * in a simple arithmetic fashion to mask or pending registers.
+ * That is, interrupt 4 does not map to bit position 4.
+ * We create two tables, indexed by vector number, to indicate
+ * which register to use and which bit in the register to use.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+
+#include "cpm2_pic.h"
+
+static struct device_node *cpm2_pic_node;
+static struct irq_host *cpm2_pic_host;
+#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+
+static const u_char irq_to_siureg[] = {
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* bit numbers do not match the docs, these are precomputed so the bit for
+ * a given irq is (1 << irq_to_siubit[irq]) */
+static const u_char irq_to_siubit[] = {
+	 0, 15, 14, 13, 12, 11, 10,  9,
+	 8,  7,  6,  5,  4,  3,  2,  1,
+	 2,  1,  0, 14, 13, 12, 11, 10,
+	 9,  8,  7,  6,  5,  4,  3,  0,
+	31, 30, 29, 28, 27, 26, 25, 24,
+	23, 22, 21, 20, 19, 18, 17, 16,
+	16, 17, 18, 19, 20, 21, 22, 23,
+	24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static void cpm2_mask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_intctl->ic_simrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_unmask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_intctl->ic_simrh);
+	ppc_cached_irq_mask[word] |= 1 << bit;
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_mask_and_ack(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr, *sipnr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_intctl->ic_simrh);
+	sipnr = &(cpm2_intctl->ic_sipnrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+	sipnr[word] = 1 << bit;
+}
+
+static void cpm2_end_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
+
+		irq_nr -= CPM_IRQ_OFFSET;
+		bit = irq_to_siubit[irq_nr];
+		word = irq_to_siureg[irq_nr];
+
+		simr = &(cpm2_intctl->ic_simrh);
+		ppc_cached_irq_mask[word] |= 1 << bit;
+		simr[word] = ppc_cached_irq_mask[word];
+		/*
+		 * Work around large numbers of spurious IRQs on PowerPC 82xx
+		 * systems.
+		 */
+		mb();
+	}
+}
+
+static struct irq_chip cpm2_pic = {
+	.typename = " CPM2 SIU ",
+	.enable = cpm2_unmask_irq,
+	.disable = cpm2_mask_irq,
+	.unmask = cpm2_unmask_irq,
+	.mask_ack = cpm2_mask_and_ack,
+	.end = cpm2_end_irq,
+};
+
+int cpm2_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	unsigned long bits;
+
+       /* For CPM2, read the SIVEC register and shift the bits down
+         * to get the irq number.         */
+        bits = cpm2_intctl->ic_sivec;
+        irq = bits >> 26;
+
+	if (irq == 0)
+		return(-1);
+	return irq+CPM_IRQ_OFFSET;
+}
+
+static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpm2_pic_node == NULL || cpm2_pic_node == node;
+}
+
+static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
+
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
+	return 0;
+}
+
+static void cpm2_host_unmap(struct irq_host *h, unsigned int virq)
+{
+	/* Make sure irq is masked in hardware */
+	cpm2_mask_irq(virq);
+
+	/* remove chip and handler */
+	set_irq_chip_and_handler(virq, NULL, NULL);
+}
+
+static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	static const unsigned char map_cpm2_senses[4] = {
+		IRQ_TYPE_LEVEL_LOW,
+		IRQ_TYPE_LEVEL_HIGH,
+		IRQ_TYPE_EDGE_FALLING,
+		IRQ_TYPE_EDGE_RISING,
+	};
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1 && intspec[1] < 4)
+		*out_flags = map_cpm2_senses[intspec[1]];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+
+	return 0;
+}
+
+static struct irq_host_ops cpm2_pic_host_ops = {
+	.match = cpm2_pic_host_match,
+	.map = cpm2_pic_host_map,
+	.unmap = cpm2_host_unmap,
+	.xlate = cpm2_pic_host_xlate,
+};
+
+void cpm2_pic_init(struct device_node *node)
+{
+	int i;
+
+	/* Clear the CPM IRQ controller, in case it has any bits set
+	 * from the bootloader
+	 */
+
+	/* Mask out everything */
+
+	cpm2_intctl->ic_simrh = 0x00000000;
+	cpm2_intctl->ic_simrl = 0x00000000;
+
+	wmb();
+
+	/* Ack everything */
+	cpm2_intctl->ic_sipnrh = 0xffffffff;
+	cpm2_intctl->ic_sipnrl = 0xffffffff;
+	wmb();
+
+	/* Dummy read of the vector */
+	i = cpm2_intctl->ic_sivec;
+	rmb();
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	cpm2_intctl->ic_sicr = 0;
+	cpm2_intctl->ic_scprrh = 0x05309770;
+	cpm2_intctl->ic_scprrl = 0x05309770;
+
+	/* create a legacy host */
+	if (node)
+		cpm2_pic_node = of_node_get(node);
+
+	cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64);
+	if (cpm2_pic_host == NULL) {
+		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
+		return;
+	}
+}

arch/powerpc/sysdev/cpm2_pic.h

+#ifndef _PPC_KERNEL_CPM2_H
+#define _PPC_KERNEL_CPM2_H
+
+extern intctl_cpm2_t *cpm2_intctl;
+
+extern int cpm2_get_irq(struct pt_regs *regs);
+
+extern void cpm2_pic_init(struct device_node*);
+
+#endif /* _PPC_KERNEL_CPM2_H */

arch/powerpc/sysdev/fsl_soc.c

@@ -3,6 +3,9 @@
  *
  * Maintained by Kumar Gala (see MAINTAINERS for contact information)
  *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -20,15 +23,20 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/time.h>
 #include <asm/prom.h>
 #include <sysdev/fsl_soc.h>
 #include <mm/mmu_decl.h>
+#include <asm/cpm2.h>
 
+extern void init_fcc_ioports(struct fs_platform_info*);
 static phys_addr_t immrbase = -1;
 
 phys_addr_t get_immrbase(void)
@@ -42,7 +50,9 @@ phys_addr_t get_immrbase(void)
 	if (soc) {
 		unsigned int size;
 		const void *prop = get_property(soc, "reg", &size);
-		immrbase = of_translate_address(soc, prop);
+
+		if (prop)
+			immrbase = of_translate_address(soc, prop);
 		of_node_put(soc);
 	};
 
@@ -51,6 +61,59 @@ phys_addr_t get_immrbase(void)
 
 EXPORT_SYMBOL(get_immrbase);
 
+#ifdef CONFIG_CPM2
+
+static u32 brgfreq = -1;
+
+u32 get_brgfreq(void)
+{
+	struct device_node *node;
+
+	if (brgfreq != -1)
+		return brgfreq;
+
+	node = of_find_node_by_type(NULL, "cpm");
+	if (node) {
+		unsigned int size;
+		const unsigned int *prop = get_property(node, "brg-frequency",
+					&size);
+
+		if (prop)
+			brgfreq = *prop;
+		of_node_put(node);
+	};
+
+	return brgfreq;
+}
+
+EXPORT_SYMBOL(get_brgfreq);
+
+static u32 fs_baudrate = -1;
+
+u32 get_baudrate(void)
+{
+	struct device_node *node;
+
+	if (fs_baudrate != -1)
+		return fs_baudrate;
+
+	node = of_find_node_by_type(NULL, "serial");
+	if (node) {
+		unsigned int size;
+		const unsigned int *prop = get_property(node, "current-speed",
+				&size);
+
+		if (prop)
+			fs_baudrate = *prop;
+		of_node_put(node);
+	};
+
+	return fs_baudrate;
+}
+
+EXPORT_SYMBOL(get_baudrate);
+#endif /* CONFIG_CPM2 */
+
 static int __init gfar_mdio_of_init(void)
 {
 	struct device_node *np;
@@ -85,8 +148,11 @@ static int __init gfar_mdio_of_init(void)
 			mdio_data.irq[k] = -1;
 
 		while ((child = of_get_next_child(np, child)) != NULL) {
-			const u32 *id = get_property(child, "reg", NULL);
-			mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
+			int irq = irq_of_parse_and_map(child, 0);
+			if (irq != NO_IRQ) {
+				const u32 *id = get_property(child, "reg", NULL);
+				mdio_data.irq[*id] = irq;
+			}
 		}
 
 		ret =
@@ -128,7 +194,7 @@ static int __init gfar_of_init(void)
 		const char *model;
 		const void *mac_addr;
 		const phandle *ph;
-		int n_res = 1;
+		int n_res = 2;
 
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
@@ -159,7 +225,7 @@ static int __init gfar_of_init(void)
 
 		gfar_dev =
 		    platform_device_register_simple("fsl-gianfar", i, &r[0],
-						    n_res + 1);
+						    n_res);
 
 		if (IS_ERR(gfar_dev)) {
 			ret = PTR_ERR(gfar_dev);
@@ -478,3 +544,208 @@ static int __init fsl_usb_of_init(void)
 }
 
 arch_initcall(fsl_usb_of_init);
+
+#ifdef CONFIG_CPM2
+
+static const char fcc_regs[] = "fcc_regs";
+static const char fcc_regs_c[] = "fcc_regs_c";
+static const char fcc_pram[] = "fcc_pram";
+static char bus_id[9][BUS_ID_SIZE];
+
+static int __init fs_enet_of_init(void)
+{
+	struct device_node *np;
+	unsigned int i;
+	struct platform_device *fs_enet_dev;
+	struct resource res;
+	int ret;
+
+	for (np = NULL, i = 0;
+	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
+	     i++) {
+		struct resource r[4];
+		struct device_node *phy, *mdio;
+		struct fs_platform_info fs_enet_data;
+		const unsigned int *id, *phy_addr;
+		const void *mac_addr;
+		const phandle *ph;
+		const char *model;
+
+		memset(r, 0, sizeof(r));
+		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
+
+		ret = of_address_to_resource(np, 0, &r[0]);
+		if (ret)
+			goto err;
+		r[0].name = fcc_regs;
+
+		ret = of_address_to_resource(np, 1, &r[1]);
+		if (ret)
+			goto err;
+		r[1].name = fcc_pram;
+
+		ret = of_address_to_resource(np, 2, &r[2]);
+		if (ret)
+			goto err;
+		r[2].name = fcc_regs_c;
+
+		r[3].start = r[3].end = irq_of_parse_and_map(np, 0);
+		r[3].flags = IORESOURCE_IRQ;
+
+		fs_enet_dev =
+		    platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
+
+		if (IS_ERR(fs_enet_dev)) {
+			ret = PTR_ERR(fs_enet_dev);
+			goto err;
+		}
+
+		model = get_property(np, "model", NULL);
+		if (model == NULL) {
+			ret = -ENODEV;
+			goto unreg;
+		}
+
+		mac_addr = get_property(np, "mac-address", NULL);
+		memcpy(fs_enet_data.macaddr, mac_addr, 6);
+
+		ph = get_property(np, "phy-handle", NULL);
+		phy = of_find_node_by_phandle(*ph);
+
+		if (phy == NULL) {
+			ret = -ENODEV;
+			goto unreg;
+		}
+
+		phy_addr = get_property(phy, "reg", NULL);
+		fs_enet_data.phy_addr = *phy_addr;
+
+		id = get_property(np, "device-id", NULL);
+		fs_enet_data.fs_no = *id;
+		strcpy(fs_enet_data.fs_type, model);
+
+		mdio = of_get_parent(phy);
+                ret = of_address_to_resource(mdio, 0, &res);
+                if (ret) {
+                        of_node_put(phy);
+                        of_node_put(mdio);
+                        goto unreg;
+                }
+
+		fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL));
+		fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL));
+
+		if (strstr(model, "FCC")) {
+			int fcc_index = *id - 1;
+
+			fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
+			fs_enet_data.rx_ring = 32;
+			fs_enet_data.tx_ring = 32;
+			fs_enet_data.rx_copybreak = 240;
+			fs_enet_data.use_napi = 0;
+			fs_enet_data.napi_weight = 17;
+			fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
+			fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
+			fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
+
+			snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
+							(u32)res.start, fs_enet_data.phy_addr);
+			fs_enet_data.bus_id = (char*)&bus_id[(*id)];
+			fs_enet_data.init_ioports = init_fcc_ioports;
+		}
+
+		of_node_put(phy);
+		of_node_put(mdio);
+
+		ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
+					     sizeof(struct
+						    fs_platform_info));
+		if (ret)
+			goto unreg;
+	}
+	return 0;
+
+unreg:
+	platform_device_unregister(fs_enet_dev);
+err:
+	return ret;
+}
+
+arch_initcall(fs_enet_of_init);
+
+static const char scc_regs[] = "regs";
+static const char scc_pram[] = "pram";
+
+static int __init cpm_uart_of_init(void)
+{
+	struct device_node *np;
+	unsigned int i;
+	struct platform_device *cpm_uart_dev;
+	int ret;
+
+	for (np = NULL, i = 0;
+	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
+	     i++) {
+		struct resource r[3];
+		struct fs_uart_platform_info cpm_uart_data;
+		const int *id;
+		const char *model;
+
+		memset(r, 0, sizeof(r));
+		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
+
+		ret = of_address_to_resource(np, 0, &r[0]);
+		if (ret)
+			goto err;
+
+		r[0].name = scc_regs;
+
+		ret = of_address_to_resource(np, 1, &r[1]);
+		if (ret)
+			goto err;
+		r[1].name = scc_pram;
+
+		r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
+		r[2].flags = IORESOURCE_IRQ;
+
+		cpm_uart_dev =
+		    platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
+
+		if (IS_ERR(cpm_uart_dev)) {
+			ret = PTR_ERR(cpm_uart_dev);
+			goto err;
+		}
+
+		id = get_property(np, "device-id", NULL);
+		cpm_uart_data.fs_no = *id;
+
+		model = (char*)get_property(np, "model", NULL);
+		strcpy(cpm_uart_data.fs_type, model);
+
+		cpm_uart_data.uart_clk = ppc_proc_freq;
+
+		cpm_uart_data.tx_num_fifo = 4;
+		cpm_uart_data.tx_buf_size = 32;
+		cpm_uart_data.rx_num_fifo = 4;
+		cpm_uart_data.rx_buf_size = 32;
+		cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL));
+		cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL));
+
+		ret =
+		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
+					     sizeof(struct
+						    fs_uart_platform_info));
+		if (ret)
+			goto unreg;
+	}
+
+	return 0;
+
+unreg:
+	platform_device_unregister(cpm_uart_dev);
+err:
+	return ret;
+}
+
+arch_initcall(cpm_uart_of_init);
+#endif /* CONFIG_CPM2 */

arch/powerpc/sysdev/fsl_soc.h

@@ -5,6 +5,8 @@
 #include <asm/mmu.h>
 
 extern phys_addr_t get_immrbase(void);
+extern u32 get_brgfreq(void);
+extern u32 get_baudrate(void);
 
 #endif
 #endif

arch/ppc/boot/utils/mkbugboot.c

@@ -19,36 +19,13 @@
 #include <stdlib.h>
 #include <errno.h>
 #include <fcntl.h>
+#include <netinet/in.h>
 #ifdef __sun__
 #include <inttypes.h>
 #else
 #include <stdint.h>
 #endif
 
-#ifdef __i386__
-#define cpu_to_be32(x) le32_to_cpu(x)
-#define cpu_to_be16(x) le16_to_cpu(x)
-#else
-#define cpu_to_be32(x) (x)
-#define cpu_to_be16(x) (x)
-#endif
-
-#define cpu_to_le32(x) le32_to_cpu((x))
-unsigned long le32_to_cpu(unsigned long x)
-{
-     	return (((x & 0x000000ffU) << 24) |
-		((x & 0x0000ff00U) <<  8) |
-		((x & 0x00ff0000U) >>  8) |
-		((x & 0xff000000U) >> 24));
-}
-
-#define cpu_to_le16(x) le16_to_cpu((x))
-unsigned short le16_to_cpu(unsigned short x)
-{
-	return (((x & 0x00ff) << 8) |
-		((x & 0xff00) >> 8));
-}
-
 /* size of read buffer */
 #define SIZE 0x1000
 
@@ -62,124 +39,109 @@ typedef struct bug_boot_header {
 
 #define HEADER_SIZE	sizeof(bug_boot_header_t)
 
-uint32_t copy_image(int32_t in_fd, int32_t out_fd)
+void update_checksum(void *buf, size_t size, uint16_t *sum)
 {
-  uint8_t buf[SIZE];
-  int n;
-  uint32_t image_size = 0;
-  uint8_t zero = 0;
-
-  lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET);
-
-  /* Copy an image while recording its size */
-  while ( (n = read(in_fd, buf, SIZE)) > 0 )
-    {
-    image_size = image_size + n;
-    write(out_fd, buf, n);
-    }
-
-  /* BUG romboot requires that our size is divisible by 2 */
-  /* align image to 2 byte boundary */
-  if (image_size % 2)
-    {
-    image_size++;
-    write(out_fd, &zero, 1);
-    }
-
-  return image_size;
+	uint32_t csum = *sum;
+
+	while (size) {
+		csum += *(uint16_t *)buf;
+		if (csum > 0xffff)
+			csum -= 0xffff;
+		buf = (uint16_t *)buf + 1;
+		size -= 2;
+	}
+	*sum = csum;
 }
 
-void write_bugboot_header(int32_t out_fd, uint32_t boot_size)
+uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum)
 {
-  uint8_t header_block[HEADER_SIZE];
-  bug_boot_header_t *bbh = (bug_boot_header_t *)&header_block[0];
-
-  memset(header_block, 0, HEADER_SIZE);
-
-  /* Fill in the PPCBUG ROM boot header */
-  strncpy(bbh->magic_word, "BOOT", 4);		/* PPCBUG magic word */
-  bbh->entry_offset = cpu_to_be32(HEADER_SIZE);	/* Entry address */
-  bbh->routine_length= cpu_to_be32(HEADER_SIZE+boot_size+2);	/* Routine length */
-  strncpy(bbh->routine_name, "LINUXROM", 8);		/* Routine name   */
-
-  /* Output the header and bootloader to the file */
-  write(out_fd, header_block, HEADER_SIZE);
+	uint8_t buf[SIZE];
+	int offset = 0;
+	int n;
+	uint32_t image_size = 0;
+
+	lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET);
+
+	/* Copy an image while recording its size */
+	while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) {
+		n += offset;
+		offset = n & 1;
+		n -= offset;
+		image_size = image_size + n;
+		/* who's going to deal with short writes? */
+		write(out_fd, buf, n);
+		update_checksum(buf, n, sum);
+		if (offset)
+			buf[0] = buf[n];
+	}
+
+	/* BUG romboot requires that our size is divisible by 2 */
+	/* align image to 2 byte boundary */
+	if (offset) {
+		image_size += 2;
+		buf[1] = '\0';
+		write(out_fd, buf, 2);
+		update_checksum(buf, 2, sum);
+	}
+	return image_size;
 }
 
-uint16_t calc_checksum(int32_t bug_fd)
+void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum)
 {
-  uint32_t checksum_var = 0;
-  uint8_t buf[2];
-  int n;
-
-  /* Checksum loop */
-  while ( (n = read(bug_fd, buf, 2) ) )
-  {
-    checksum_var = checksum_var + *(uint16_t *)buf;
-
-    /* If we carry out, mask it and add one to the checksum */
-    if (checksum_var >> 16)
-      checksum_var = (checksum_var & 0x0000ffff) + 1;
-  }
-
-  return checksum_var;
+	static bug_boot_header_t bbh = {
+		.magic_word = "BOOT",
+		.routine_name = "LINUXROM"
+	};
+
+	/* Fill in the PPCBUG ROM boot header */
+	bbh.entry_offset = htonl(HEADER_SIZE);	/* Entry address */
+	bbh.routine_length= htonl(HEADER_SIZE+boot_size+2);	/* Routine length */
+
+	/* Output the header and bootloader to the file */
+	write(out_fd, &bbh, sizeof(bug_boot_header_t));
+	update_checksum(&bbh, sizeof(bug_boot_header_t), sum);
 }
 
 int main(int argc, char *argv[])
 {
-  int32_t image_fd, bugboot_fd;
-  int argptr = 1;
-  uint32_t kernel_size = 0;
-  uint16_t checksum = 0;
-  uint8_t bugbootname[256];
-
-  if ( (argc != 3) )
-  {
-    fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]);
-    exit(-1);
-  }
-
-  /* Get file args */
-
-  /* kernel image file */
-    if ((image_fd = open( argv[argptr] , 0)) < 0)
-      exit(-1);
-  argptr++;
+	int image_fd, bugboot_fd;
+	uint32_t kernel_size = 0;
+	uint16_t checksum = 0;
 
-  /* bugboot file */
-  if ( !strcmp( argv[argptr], "-" ) )
-    bugboot_fd = 1;			/* stdout */
-  else
-    if ((bugboot_fd = creat( argv[argptr] , 0755)) < 0)
-      exit(-1);
-    else
-      strcpy(bugbootname, argv[argptr]);
-  argptr++;
+	if (argc != 3) {
+		fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]);
+		exit(-1);
+	}
 
-  /* Set file position after ROM header block where zImage will be written */
-  lseek(bugboot_fd, HEADER_SIZE, SEEK_SET);
+	/* Get file args */
 
-  /* Copy kernel image into bugboot image */
-  kernel_size = copy_image(image_fd, bugboot_fd);
-  close(image_fd);
+	/* kernel image file */
+	if ((image_fd = open(argv[1] , 0)) < 0)
+		exit(-1);
 
-  /* Set file position to beginning where header/romboot will be written */
-  lseek(bugboot_fd, 0, SEEK_SET);
+	/* bugboot file */
+	if (!strcmp(argv[2], "-"))
+		bugboot_fd = 1;			/* stdout */
+	else if ((bugboot_fd = creat(argv[2] , 0755)) < 0)
+		exit(-1);
 
-  /* Write out BUG header/romboot */
-  write_bugboot_header(bugboot_fd, kernel_size);
+	/* Set file position after ROM header block where zImage will be written */
+	lseek(bugboot_fd, HEADER_SIZE, SEEK_SET);
 
-  /* Close bugboot file */
-  close(bugboot_fd);
+	/* Copy kernel image into bugboot image */
+	kernel_size = copy_image(image_fd, bugboot_fd, &checksum);
 
-  /* Reopen it as read/write */
-  bugboot_fd = open(bugbootname, O_RDWR);
+	/* Set file position to beginning where header/romboot will be written */
+	lseek(bugboot_fd, 0, SEEK_SET);
 
-  /* Calculate checksum */
-  checksum = calc_checksum(bugboot_fd);
+	/* Write out BUG header/romboot */
+	write_bugboot_header(bugboot_fd, kernel_size, &checksum);
 
-  /* Write out the calculated checksum */
-  write(bugboot_fd, &checksum, 2);
+	/* Write out the calculated checksum */
+	lseek(bugboot_fd, 0, SEEK_END);
+	write(bugboot_fd, &checksum, 2);
 
-  return 0;
+	/* Close bugboot file */
+	close(bugboot_fd);
+	return 0;
 }

arch/ppc/boot/utils/mkprep.c

@@ -15,279 +15,227 @@
  * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de>
  */
 
-#include <fcntl.h>
 #include <stdio.h>
-#include <stdlib.h>
 #include <string.h>
-#include <strings.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-#define cpu_to_le32(x) le32_to_cpu((x))
-unsigned long le32_to_cpu(unsigned long x)
-{
-     	return (((x & 0x000000ffU) << 24) |
-		((x & 0x0000ff00U) <<  8) |
-		((x & 0x00ff0000U) >>  8) |
-		((x & 0xff000000U) >> 24));
-}
-
-
-#define cpu_to_le16(x) le16_to_cpu((x))
-unsigned short le16_to_cpu(unsigned short x)
-{
-	return (((x & 0x00ff) << 8) |
-		((x & 0xff00) >> 8));
-}
-
-#define cpu_to_be32(x) (x)
-#define be32_to_cpu(x) (x)
-#define cpu_to_be16(x) (x)
-#define be16_to_cpu(x) (x)
+#include <stdlib.h>
 
 /* size of read buffer */
 #define SIZE 0x1000
 
-
-typedef unsigned long dword_t;
-typedef unsigned short word_t;
-typedef unsigned char byte_t;
-typedef byte_t block_t[512];
-typedef byte_t page_t[4096];
-
-
 /*
  * Partition table entry
  *  - from the PReP spec
  */
 typedef struct partition_entry {
-  byte_t	boot_indicator;
-  byte_t	starting_head;
-  byte_t	starting_sector;
-  byte_t	starting_cylinder;
-
-  byte_t	system_indicator;
-  byte_t	ending_head;
-  byte_t	ending_sector;
-  byte_t	ending_cylinder;
-
-  dword_t	beginning_sector;
-  dword_t	number_of_sectors;
+	unsigned char boot_indicator;
+	unsigned char starting_head;
+	unsigned char starting_sector;
+	unsigned char starting_cylinder;
+
+	unsigned char system_indicator;
+	unsigned char ending_head;
+	unsigned char ending_sector;
+	unsigned char ending_cylinder;
+
+	unsigned char beginning_sector[4];
+	unsigned char number_of_sectors[4];
 } partition_entry_t;
 
 #define BootActive	0x80
 #define SystemPrep	0x41
 
-void copy_image(int , int);
-void write_prep_partition(int , int );
-void write_asm_data( int in, int out );
+void copy_image(FILE *, FILE *);
+void write_prep_partition(FILE *, FILE *);
+void write_asm_data(FILE *, FILE *);
 
 unsigned int elfhdr_size = 65536;
 
 int main(int argc, char *argv[])
 {
-  int in_fd, out_fd;
-  int argptr = 1;
-  unsigned int prep = 0;
-  unsigned int asmoutput = 0;
-
-  if ( (argc < 3) || (argc > 4) )
-  {
-    fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",argv[0]);
-    exit(-1);
-  }
-
-  /* needs to handle args more elegantly -- but this is a small/simple program */
-
-  /* check for -pbp */
-  if ( !strcmp( argv[argptr], "-pbp" ) )
-  {
-    prep = 1;
-    argptr++;
-  }
-
-  /* check for -asm */
-  if ( !strcmp( argv[argptr], "-asm" ) )
-  {
-    asmoutput = 1;
-    argptr++;
-  }
-
-  /* input file */
-  if ( !strcmp( argv[argptr], "-" ) )
-    in_fd = 0;			/* stdin */
-  else
-    if ((in_fd = open( argv[argptr] , 0)) < 0)
-      exit(-1);
-  argptr++;
-
-  /* output file */
-  if ( !strcmp( argv[argptr], "-" ) )
-    out_fd = 1;			/* stdout */
-  else
-    if ((out_fd = creat( argv[argptr] , 0755)) < 0)
-      exit(-1);
-  argptr++;
-
-  /* skip elf header in input file */
-  /*if ( !prep )*/
-  lseek(in_fd, elfhdr_size, SEEK_SET);
-
-  /* write prep partition if necessary */
-  if ( prep )
-	  write_prep_partition( in_fd, out_fd );
-
-  /* write input image to bootimage */
-  if ( asmoutput )
-	  write_asm_data( in_fd, out_fd );
-  else
-	  copy_image(in_fd, out_fd);
-
-  return 0;
+	FILE *in, *out;
+	int argptr = 1;
+	int prep = 0;
+	int asmoutput = 0;
+
+	if (argc < 3 || argc > 4) {
+		fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",
+			argv[0]);
+		exit(-1);
+	}
+
+/* needs to handle args more elegantly -- but this is a small/simple program */
+
+	/* check for -pbp */
+	if (!strcmp(argv[argptr], "-pbp")) {
+		prep = 1;
+		argptr++;
+	}
+
+	/* check for -asm */
+	if (!strcmp(argv[argptr], "-asm")) {
+		asmoutput = 1;
+		argptr++;
+	}
+
+	/* input file */
+	if (!strcmp(argv[argptr], "-"))
+		in = stdin;
+	else if (!(in = fopen(argv[argptr], "r")))
+		exit(-1);
+	argptr++;
+
+	/* output file */
+	if (!strcmp(argv[argptr], "-"))
+		out = stdout;
+	else if (!(out = fopen(argv[argptr], "w")))
+		exit(-1);
+	argptr++;
+
+	/* skip elf header in input file */
+	/*if ( !prep )*/
+	fseek(in, elfhdr_size, SEEK_SET);
+
+	/* write prep partition if necessary */
+	if (prep)
+		write_prep_partition(in, out);
+
+	/* write input image to bootimage */
+	if (asmoutput)
+		write_asm_data(in, out);
+	else
+		copy_image(in, out);
+
+	return 0;
 }
 
-void write_prep_partition(int in, int out)
+void store_le32(unsigned int v, unsigned char *p)
 {
-  unsigned char block[512];
-  partition_entry_t pe;
-  dword_t *entry  = (dword_t *)&block[0];
-  dword_t *length = (dword_t *)&block[sizeof(long)];
-  struct stat info;
-
-  if (fstat(in, &info) < 0)
-  {
-    fprintf(stderr,"info failed\n");
-    exit(-1);
-  }
-
-  bzero( block, sizeof block );
-
-  /* set entry point and boot image size skipping over elf header */
-#ifdef __i386__
-  *entry = 0x400/*+65536*/;
-  *length = info.st_size-elfhdr_size+0x400;
-#else
-  *entry = cpu_to_le32(0x400/*+65536*/);
-  *length = cpu_to_le32(info.st_size-elfhdr_size+0x400);
-#endif /* __i386__ */
-
-  /* sets magic number for msdos partition (used by linux) */
-  block[510] = 0x55;
-  block[511] = 0xAA;
-
-  /*
-   * Build a "PReP" partition table entry in the boot record
-   *  - "PReP" may only look at the system_indicator
-   */
-  pe.boot_indicator   = BootActive;
-  pe.system_indicator = SystemPrep;
-  /*
-   * The first block of the diskette is used by this "boot record" which
-   * actually contains the partition table. (The first block of the
-   * partition contains the boot image, but I digress...)  We'll set up
-   * one partition on the diskette and it shall contain the rest of the
-   * diskette.
-   */
-  pe.starting_head     = 0;	/* zero-based			     */
-  pe.starting_sector   = 2;	/* one-based			     */
-  pe.starting_cylinder = 0;	/* zero-based			     */
-  pe.ending_head       = 1;	/* assumes two heads		     */
-  pe.ending_sector     = 18;	/* assumes 18 sectors/track	     */
-  pe.ending_cylinder   = 79;	/* assumes 80 cylinders/diskette     */
-
-  /*
-   * The "PReP" software ignores the above fields and just looks at
-   * the next two.
-   *   - size of the diskette is (assumed to be)
-   *     (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette)
-   *   - unlike the above sector numbers, the beginning sector is zero-based!
-   */
+	p[0] = v;
+	p[1] = v >>= 8;
+	p[2] = v >>= 8;
+	p[3] = v >> 8;
+}
+
+void write_prep_partition(FILE *in, FILE *out)
+{
+	unsigned char block[512];
+	partition_entry_t pe;
+	unsigned char *entry  = block;
+	unsigned char *length = block + 4;
+	long pos = ftell(in), size;
+
+	if (fseek(in, 0, SEEK_END) < 0) {
+		fprintf(stderr,"info failed\n");
+		exit(-1);
+	}
+	size = ftell(in);
+	if (fseek(in, pos, SEEK_SET) < 0) {
+		fprintf(stderr,"info failed\n");
+		exit(-1);
+	}
+
+	memset(block, '\0', sizeof(block));
+
+	/* set entry point and boot image size skipping over elf header */
+	store_le32(0x400/*+65536*/, entry);
+	store_le32(size-elfhdr_size+0x400, length);
+
+	/* sets magic number for msdos partition (used by linux) */
+	block[510] = 0x55;
+	block[511] = 0xAA;
+
+	/*
+	* Build a "PReP" partition table entry in the boot record
+	*  - "PReP" may only look at the system_indicator
+	*/
+	pe.boot_indicator   = BootActive;
+	pe.system_indicator = SystemPrep;
+	/*
+	* The first block of the diskette is used by this "boot record" which
+	* actually contains the partition table. (The first block of the
+	* partition contains the boot image, but I digress...)  We'll set up
+	* one partition on the diskette and it shall contain the rest of the
+	* diskette.
+	*/
+	pe.starting_head     = 0;	/* zero-based			     */
+	pe.starting_sector   = 2;	/* one-based			     */
+	pe.starting_cylinder = 0;	/* zero-based			     */
+	pe.ending_head       = 1;	/* assumes two heads		     */
+	pe.ending_sector     = 18;	/* assumes 18 sectors/track	     */
+	pe.ending_cylinder   = 79;	/* assumes 80 cylinders/diskette     */
+
+	/*
+	* The "PReP" software ignores the above fields and just looks at
+	* the next two.
+	*   - size of the diskette is (assumed to be)
+	*     (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette)
+	*   - unlike the above sector numbers, the beginning sector is zero-based!
+	*/
 #if 0
-  pe.beginning_sector  = cpu_to_le32(1);
-#else
-  /* This has to be 0 on the PowerStack? */
-#ifdef __i386__
-  pe.beginning_sector  = 0;
+	store_le32(1, pe.beginning_sector);
 #else
-  pe.beginning_sector  = cpu_to_le32(0);
-#endif /* __i386__ */
+	/* This has to be 0 on the PowerStack? */
+	store_le32(0, pe.beginning_sector);
 #endif
 
-#ifdef __i386__
-  pe.number_of_sectors = 2*18*80-1;
-#else
-  pe.number_of_sectors = cpu_to_le32(2*18*80-1);
-#endif /* __i386__ */
+	store_le32(2*18*80-1, pe.number_of_sectors);
 
-  memcpy(&block[0x1BE], &pe, sizeof(pe));
+	memcpy(&block[0x1BE], &pe, sizeof(pe));
 
-  write( out, block, sizeof(block) );
-  write( out, entry, sizeof(*entry) );
-  write( out, length, sizeof(*length) );
-  /* set file position to 2nd sector where image will be written */
-  lseek( out, 0x400, SEEK_SET );
+	fwrite(block, sizeof(block), 1, out);
+	fwrite(entry, 4, 1, out);
+	fwrite(length, 4, 1, out);
+	/* set file position to 2nd sector where image will be written */
+	fseek( out, 0x400, SEEK_SET );
 }
 
 
 
-void
-copy_image(int in, int out)
+void copy_image(FILE *in, FILE *out)
 {
-  char buf[SIZE];
-  int n;
+	char buf[SIZE];
+	int n;
 
-  while ( (n = read(in, buf, SIZE)) > 0 )
-    write(out, buf, n);
+	while ( (n = fread(buf, 1, SIZE, in)) > 0 )
+		fwrite(buf, 1, n, out);
 }
 
 
 void
-write_asm_data( int in, int out )
+write_asm_data(FILE *in, FILE *out)
 {
-  int i, cnt, pos, len;
-  unsigned int cksum, val;
-  unsigned char *lp;
-  unsigned char buf[SIZE];
-  unsigned char str[256];
-
-  write( out, "\t.data\n\t.globl input_data\ninput_data:\n",
-	 strlen( "\t.data\n\t.globl input_data\ninput_data:\n" ) );
-  pos = 0;
-  cksum = 0;
-  while ((len = read(in, buf, sizeof(buf))) > 0)
-  {
-    cnt = 0;
-    lp = (unsigned char *)buf;
-    len = (len + 3) & ~3;  /* Round up to longwords */
-    for (i = 0;  i < len;  i += 4)
-    {
-      if (cnt == 0)
-      {
-	write( out, "\t.long\t", strlen( "\t.long\t" ) );
-      }
-      sprintf( str, "0x%02X%02X%02X%02X", lp[0], lp[1], lp[2], lp[3]);
-      write( out, str, strlen(str) );
-      val = *(unsigned long *)lp;
-      cksum ^= val;
-      lp += 4;
-      if (++cnt == 4)
-      {
-	cnt = 0;
-	sprintf( str, " # %x \n", pos+i-12);
-	write( out, str, strlen(str) );
-      } else
-      {
-	write( out, ",", 1 );
-      }
-    }
-    if (cnt)
-    {
-      write( out, "0\n", 2 );
-    }
-    pos += len;
-  }
-  sprintf(str, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos);
-  write( out, str, strlen(str) );
-
-  fprintf(stderr, "cksum = %x\n", cksum);
+	int i, cnt, pos = 0;
+	unsigned int cksum = 0, val;
+	unsigned char *lp;
+	unsigned char buf[SIZE];
+	size_t len;
+
+	fputs("\t.data\n\t.globl input_data\ninput_data:\n", out);
+	while ((len = fread(buf, 1, sizeof(buf), in)) > 0) {
+		cnt = 0;
+		lp = buf;
+		/* Round up to longwords */
+		while (len & 3)
+			buf[len++] = '\0';
+		for (i = 0;  i < len;  i += 4) {
+			if (cnt == 0)
+				fputs("\t.long\t", out);
+			fprintf(out, "0x%02X%02X%02X%02X",
+				lp[0], lp[1], lp[2], lp[3]);
+			val = *(unsigned long *)lp;
+			cksum ^= val;
+			lp += 4;
+			if (++cnt == 4) {
+				cnt = 0;
+				fprintf(out, " # %x \n", pos+i-12);
+			} else {
+				fputs(",", out);
+			}
+		}
+		if (cnt)
+			fputs("0\n", out);
+		pos += len;
+	}
+	fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos);
+	fprintf(stderr, "cksum = %x\n", cksum);
 }

arch/ppc/platforms/mpc8272ads_setup.c

@@ -103,7 +103,7 @@ static struct fs_platform_info mpc82xx_enet_pdata[] = {
 	},
 };
 
-static void init_fcc1_ioports(void)
+static void init_fcc1_ioports(struct fs_platform_info*)
 {
 	struct io_port *io;
 	u32 tempval;
@@ -144,7 +144,7 @@ static void init_fcc1_ioports(void)
 	iounmap(immap);
 }
 
-static void init_fcc2_ioports(void)
+static void init_fcc2_ioports(struct fs_platform_info*)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 	u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
@@ -229,7 +229,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
 	}
 }
 
-static void init_scc1_uart_ioports(void)
+static void init_scc1_uart_ioports(struct fs_uart_platform_info*)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 
@@ -246,7 +246,7 @@ static void init_scc1_uart_ioports(void)
 	iounmap(immap);
 }
 
-static void init_scc4_uart_ioports(void)
+static void init_scc4_uart_ioports(struct fs_uart_platform_info*)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 

arch/ppc/platforms/mpc866ads_setup.c

@@ -137,7 +137,7 @@ void __init board_init(void)
 	iounmap(bcsr_io);
 }
 
-static void setup_fec1_ioports(void)
+static void setup_fec1_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -145,7 +145,7 @@ static void setup_fec1_ioports(void)
 	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
 }
 
-static void setup_scc1_ioports(void)
+static void setup_scc1_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -194,7 +194,7 @@ static void setup_scc1_ioports(void)
 
 }
 
-static void setup_smc1_ioports(void)
+static void setup_smc1_ioports(struct fs_uart_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -216,7 +216,7 @@ static void setup_smc1_ioports(void)
 
 }
 
-static void setup_smc2_ioports(void)
+static void setup_smc2_ioports(struct fs_uart_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;

arch/ppc/platforms/mpc885ads_setup.c

@@ -161,7 +161,7 @@ void __init board_init(void)
 #endif
 }
 
-static void setup_fec1_ioports(void)
+static void setup_fec1_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -181,7 +181,7 @@ static void setup_fec1_ioports(void)
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
 }
 
-static void setup_fec2_ioports(void)
+static void setup_fec2_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -193,7 +193,7 @@ static void setup_fec2_ioports(void)
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
 }
 
-static void setup_scc3_ioports(void)
+static void setup_scc3_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -315,7 +315,7 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
 	mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
 }
 
-static void setup_smc1_ioports(void)
+static void setup_smc1_ioports(struct fs_uart_platform_info*)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
         unsigned *bcsr_io;
@@ -335,7 +335,7 @@ static void setup_smc1_ioports(void)
         clrbits16(&immap->im_cpm.cp_pbodr, iobits);
 }
 
-static void setup_smc2_ioports(void)
+static void setup_smc2_ioports(struct fs_uart_platform_info*)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
         unsigned *bcsr_io;

drivers/char/hvc_iseries.c

@@ -153,9 +153,7 @@ static int put_chars(uint32_t vtermno, const char *buf, int count)
 	spin_lock_irqsave(&consolelock, flags);
 
 	if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) {
-		spin_lock_irqsave(&consoleloglock, flags);
 		HvCall_writeLogBuffer(buf, count);
-		spin_unlock_irqrestore(&consoleloglock, flags);
 		sent = count;
 		goto done;
 	}
@@ -171,11 +169,8 @@ static int put_chars(uint32_t vtermno, const char *buf, int count)
 
 		len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count;
 
-		if (viochar_is_console(pi)) {
-			spin_lock_irqsave(&consoleloglock, flags);
+		if (viochar_is_console(pi))
 			HvCall_writeLogBuffer(buf, len);
-			spin_unlock_irqrestore(&consoleloglock, flags);
-		}
 
 		init_data_event(viochar, pi->lp);
 

drivers/macintosh/via-pmu.c

@@ -336,8 +336,10 @@ int __init find_via_pmu(void)
 			if (gaddr != OF_BAD_ADDR)
 				gpio_reg = ioremap(gaddr, 0x10);
 		}
-		if (gpio_reg == NULL)
+		if (gpio_reg == NULL) {
 			printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
+			goto fail_gpio;
+		}
 	} else
 		pmu_kind = PMU_UNKNOWN;
 
@@ -365,6 +367,9 @@ int __init find_via_pmu(void)
 	return 1;
  fail:
 	of_node_put(vias);
+	iounmap(gpio_reg);
+	gpio_reg = NULL;
+ fail_gpio:
 	vias = NULL;
 	return 0;
 }

drivers/net/fs_enet/fs_enet-main.c

@@ -944,12 +944,13 @@ extern int fs_mii_connect(struct net_device *dev);
 extern void fs_mii_disconnect(struct net_device *dev);
 
 static struct net_device *fs_init_instance(struct device *dev,
-		const struct fs_platform_info *fpi)
+		struct fs_platform_info *fpi)
 {
 	struct net_device *ndev = NULL;
 	struct fs_enet_private *fep = NULL;
 	int privsize, i, r, err = 0, registered = 0;
 
+	fpi->fs_no = fs_get_id(fpi);
 	/* guard */
 	if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX)
 		return ERR_PTR(-EINVAL);
@@ -971,7 +972,7 @@ static struct net_device *fs_init_instance(struct device *dev,
 	dev_set_drvdata(dev, ndev);
 	fep->fpi = fpi;
 	if (fpi->init_ioports)
-		fpi->init_ioports();
+		fpi->init_ioports((struct fs_platform_info *)fpi);
 
 #ifdef CONFIG_FS_ENET_HAS_FEC
 	if (fs_get_fec_index(fpi->fs_no) >= 0)

drivers/pnp/isapnp/core.c

@@ -1049,6 +1049,10 @@ static int __init isapnp_init(void)
 		printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n");
 		return 0;
 	}
+#ifdef CONFIG_PPC_MERGE
+	if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP))
+		return -EINVAL;
+#endif
 #ifdef ISAPNP_REGION_OK
 	if (!request_region(_PIDXR, 1, "isapnp index")) {
 		printk(KERN_ERR "isapnp: Index Register 0x%x already used\n", _PIDXR);

drivers/serial/8250.c

@@ -320,8 +320,8 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
 
 	case UPIO_TSI:
 		if (offset == UART_IIR) {
-			tmp = readl((u32 *)(up->port.membase + UART_RX));
-			return (cpu_to_le32(tmp) >> 8) & 0xff;
+			tmp = readl(up->port.membase + (UART_IIR & ~3));
+			return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
 		} else
 			return readb(up->port.membase + offset);
 

drivers/serial/cpm_uart/cpm_uart_core.c

@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
+#include <asm/fs_pd.h>
 
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -1022,15 +1023,17 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 {
 	struct resource *r;
 	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
-	int idx = pdata->fs_no;	/* It is UART_SMCx or UART_SCCx index */
+	int idx;	/* It is UART_SMCx or UART_SCCx index */
 	struct uart_cpm_port *pinfo;
 	int line;
 	u32 mem, pram;
 
+        idx = pdata->fs_no = fs_uart_get_id(pdata);
+
 	line = cpm_uart_id2nr(idx);
 	if(line < 0) {
 		printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
-		return -1;
+		return -EINVAL;
 	}
 
 	pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
@@ -1044,11 +1047,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 
 	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
 		return -EINVAL;
-	mem = r->start;
+	mem = (u32)ioremap(r->start, r->end - r->start + 1);
 
 	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
 		return -EINVAL;
-	pram = r->start;
+	pram = (u32)ioremap(r->start, r->end - r->start + 1);
 
 	if(idx > fsid_smc2_uart) {
 		pinfo->sccp = (scc_t *)mem;
@@ -1179,7 +1182,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 		pdata = pdev->dev.platform_data;
 		if (pdata)
 			if (pdata->init_ioports)
-    	                	pdata->init_ioports();
+    	                	pdata->init_ioports(pdata);
 
 		cpm_uart_drv_get_platform_data(pdev, 1);
 	}
@@ -1189,11 +1192,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	} else {
-		bd_t *bd = (bd_t *) __res;
-
-		if (bd->bi_baudrate)
-			baud = bd->bi_baudrate;
-		else
+		if ((baud = uart_baudrate()) == -1)
 			baud = 9600;
 	}
 
@@ -1266,13 +1265,14 @@ static int cpm_uart_drv_probe(struct device *dev)
 	}
 
 	pdata = pdev->dev.platform_data;
-	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
 
 	if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
 		return ret;
 
+	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
+
 	if (pdata->init_ioports)
-                pdata->init_ioports();
+                pdata->init_ioports(pdata);
 
 	ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
 

drivers/serial/cpm_uart/cpm_uart_cpm2.c

@@ -40,6 +40,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/fs_pd.h>
 
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
@@ -50,8 +51,9 @@
 
 void cpm_line_cr_cmd(int line, int cmd)
 {
-	volatile cpm_cpm2_t *cp = cpmp;
 	ulong val;
+	volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
+
 
 	switch (line) {
 	case UART_SMC1:
@@ -84,11 +86,14 @@ void cpm_line_cr_cmd(int line, int cmd)
 	}
 	cp->cp_cpcr = val;
 	while (cp->cp_cpcr & CPM_CR_FLG) ;
+
+	cpm2_unmap(cp);
 }
 
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	/* SMC1 is only on port D */
 	io->iop_ppard |= 0x00c00000;
@@ -97,13 +102,17 @@ void smc1_lineif(struct uart_cpm_port *pinfo)
 	io->iop_psord &= ~0x00c00000;
 
 	/* Wire BRG1 to SMC1 */
-	cpm2_immr->im_cpmux.cmx_smr &= 0x0f;
+	cpmux->cmx_smr &= 0x0f;
 	pinfo->brg = 1;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	/* SMC2 is only on port A */
 	io->iop_ppara |= 0x00c00000;
@@ -112,13 +121,17 @@ void smc2_lineif(struct uart_cpm_port *pinfo)
 	io->iop_psora &= ~0x00c00000;
 
 	/* Wire BRG2 to SMC2 */
-	cpm2_immr->im_cpmux.cmx_smr &= 0xf0;
+	cpmux->cmx_smr &= 0xf0;
 	pinfo->brg = 2;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	/* Use Port D for SCC1 instead of other functions.  */
 	io->iop_ppard |= 0x00000003;
@@ -128,9 +141,12 @@ void scc1_lineif(struct uart_cpm_port *pinfo)
 	io->iop_pdird |= 0x00000002;	/* Tx */
 
 	/* Wire BRG1 to SCC1 */
-	cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x00000000;
+	cpmux->cmx_scr &= 0x00ffffff;
+	cpmux->cmx_scr |= 0x00000000;
 	pinfo->brg = 1;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc2_lineif(struct uart_cpm_port *pinfo)
@@ -143,43 +159,57 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
 	 * be supported in a sane fashion.
 	 */
 #ifndef CONFIG_STX_GP3
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
+
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
 	io->iop_psorb |= 0x00880000;
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
 #endif
-	cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
+	cpmux->cmx_scr &= 0xff00ffff;
+	cpmux->cmx_scr |= 0x00090000;
 	pinfo->brg = 2;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc3_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
+
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
 	io->iop_psorb |= 0x00880000;
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
-	cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x00001200;
+	cpmux->cmx_scr &= 0xffff00ff;
+	cpmux->cmx_scr |= 0x00001200;
 	pinfo->brg = 3;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc4_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	io->iop_ppard |= 0x00000600;
 	io->iop_psord &= ~0x00000600;	/* Tx/Rx */
 	io->iop_pdird &= ~0x00000200;	/* Rx */
 	io->iop_pdird |= 0x00000400;	/* Tx */
 
-	cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b;
+	cpmux->cmx_scr &= 0xffffff00;
+	cpmux->cmx_scr |= 0x0000001b;
 	pinfo->brg = 4;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 /*
@@ -254,88 +284,103 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 /* Setup any dynamic params in the uart desc */
 int cpm_uart_init_portdesc(void)
 {
+#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
+	u32 addr;
+#endif
 	pr_debug("CPM uart[-]:init portdesc\n");
 
 	cpm_uart_nr = 0;
 #ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0];
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1];
-	*(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1;
+	cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
 	cpm_uart_ports[UART_SMC1].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_smc[0];
+	    (unsigned long)cpm_uart_ports[UART_SMC1].smcp;
+
+	cpm_uart_ports[UART_SMC1].smcup =
+	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
+	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
+	*addr = PROFF_SMC1;
+	cpm2_unmap(addr);
+
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1];
-	cpm_uart_ports[UART_SMC2].smcup =
-	    (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2];
-	*(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC2_BASE]) = PROFF_SMC2;
+	cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
 	cpm_uart_ports[UART_SMC2].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_smc[1];
+	    (unsigned long)cpm_uart_ports[UART_SMC2].smcp;
+
+	cpm_uart_ports[UART_SMC2].smcup =
+	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
+	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
+	*addr = PROFF_SMC2;
+	cpm2_unmap(addr);
+
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0];
-	cpm_uart_ports[UART_SCC1].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1];
+	cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
 	cpm_uart_ports[UART_SCC1].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[0];
+	    (unsigned long)cpm_uart_ports[UART_SCC1].sccp;
+	cpm_uart_ports[UART_SCC1].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1];
-	cpm_uart_ports[UART_SCC2].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2];
+	cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
 	cpm_uart_ports[UART_SCC2].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[1];
+	    (unsigned long)cpm_uart_ports[UART_SCC2].sccp;
+	cpm_uart_ports[UART_SCC2].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2];
-	cpm_uart_ports[UART_SCC3].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3];
+	cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
 	cpm_uart_ports[UART_SCC3].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[2];
+	    (unsigned long)cpm_uart_ports[UART_SCC3].sccp;
+	cpm_uart_ports[UART_SCC3].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3];
-	cpm_uart_ports[UART_SCC4].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4];
+	cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
 	cpm_uart_ports[UART_SCC4].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[3];
+	    (unsigned long)cpm_uart_ports[UART_SCC4].sccp;
+	cpm_uart_ports[UART_SCC4].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
 #endif
 

drivers/serial/cpm_uart/cpm_uart_cpm2.h

@@ -40,6 +40,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
 	up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB;
 }
 
-#define DPRAM_BASE	((unsigned char *)&cpm2_immr->im_dprambase[0])
+#define DPRAM_BASE	((unsigned char *)cpm_dpram_addr(0))
 
 #endif

include/asm-powerpc/fs_pd.h

+/*
+ * Platform information definitions.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_PD_H
+#define FS_PD_H
+#include <asm/cpm2.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/time.h>
+
+static inline int uart_baudrate(void)
+{
+        return get_baudrate();
+}
+
+static inline int uart_clock(void)
+{
+        return ppc_proc_freq;
+}
+
+#define cpm2_map(member)						\
+({									\
+	u32 offset = offsetof(cpm2_map_t, member);			\
+	void *addr = ioremap (CPM_MAP_ADDR + offset,			\
+			      sizeof( ((cpm2_map_t*)0)->member));	\
+	addr;								\
+})
+
+#define cpm2_map_size(member, size)					\
+({									\
+	u32 offset = offsetof(cpm2_map_t, member);			\
+	void *addr = ioremap (CPM_MAP_ADDR + offset, size);		\
+	addr;								\
+})
+
+#define cpm2_unmap(addr)	iounmap(addr)
+
+#endif

include/asm-powerpc/mpc85xx.h

+/*
+ * include/asm-powerpc/mpc85xx.h
+ *
+ * MPC85xx definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC85xx_H__
+#define __ASM_MPC85xx_H__
+
+#include <asm/mmu.h>
+
+#ifdef CONFIG_85xx
+
+#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS)
+#include <platforms/85xx/mpc85xx_ads.h>
+#endif
+#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
+#include <platforms/85xx/mpc8555_cds.h>
+#endif
+#ifdef CONFIG_MPC85xx_CDS
+#include <platforms/85xx/mpc85xx_cds.h>
+#endif
+
+#define _IO_BASE        isa_io_base
+#define _ISA_MEM_BASE   isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/* Let modules/drivers get at CCSRBAR */
+extern phys_addr_t get_ccsrbar(void);
+
+#ifdef MODULE
+#define CCSRBAR get_ccsrbar()
+#else
+#define CCSRBAR BOARD_CCSRBAR
+#endif
+
+#endif /* CONFIG_85xx */
+#endif /* __ASM_MPC85xx_H__ */
+#endif /* __KERNEL__ */

include/asm-powerpc/time.h

@@ -39,6 +39,10 @@ extern void generic_calibrate_decr(void);
 extern void wakeup_decrementer(void);
 extern void snapshot_timebase(void);
 
+#ifdef CONFIG_RTC_CLASS
+extern int __init rtc_class_hookup(void);
+#endif
+
 /* Some sane defaults: 125 MHz timebase, 1GHz processor */
 extern unsigned long ppc_proc_freq;
 #define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
@@ -234,4 +238,4 @@ extern void snapshot_timebases(void);
 #endif
 
 #endif /* __KERNEL__ */
-#endif /* __PPC64_TIME_H */
+#endif /* __POWERPC_TIME_H */

include/asm-ppc/cpm2.h

@@ -42,6 +42,8 @@
 #define CPM_CR_IDMA4_SBLOCK	(0x17)
 #define CPM_CR_MCC1_SBLOCK	(0x1c)
 
+#define CPM_CR_FCC_SBLOCK(x)	(x + 0x10)
+
 #define CPM_CR_SCC1_PAGE	(0x00)
 #define CPM_CR_SCC2_PAGE	(0x01)
 #define CPM_CR_SCC3_PAGE	(0x02)
@@ -62,6 +64,8 @@
 #define CPM_CR_MCC1_PAGE	(0x07)
 #define CPM_CR_MCC2_PAGE	(0x08)
 
+#define CPM_CR_FCC_PAGE(x)	(x + 0x04)
+
 /* Some opcodes (there are more...later)
 */
 #define CPM_CR_INIT_TRX		((ushort)0x0000)
@@ -173,6 +177,10 @@ typedef struct cpm_buf_desc {
 #define PROFF_I2C_BASE		((uint)0x8afc)
 #define PROFF_IDMA4_BASE	((uint)0x8afe)
 
+#define PROFF_SCC_SIZE		((uint)0x100)
+#define PROFF_FCC_SIZE		((uint)0x100)
+#define PROFF_SMC_SIZE		((uint)64)
+
 /* The SMCs are relocated to any of the first eight DPRAM pages.
  * We will fix these at the first locations of DPRAM, until we
  * get some microcode patches :-).
@@ -1186,7 +1194,60 @@ typedef struct im_idma {
 #define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
 #define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
 #define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2)
+#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
+
+/* Clocks and GRG's */
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_FCC1,
+	CPM_CLK_FCC2,
+	CPM_CLK_FCC3
+};
+
+enum cpm_clk {
+	CPM_CLK_NONE = 0,
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_BRG5,	/* Baud Rate Generator  5 */
+	CPM_BRG6,	/* Baud Rate Generator  6 */
+	CPM_BRG7,	/* Baud Rate Generator  7 */
+	CPM_BRG8,	/* Baud Rate Generator  8 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+	CPM_CLK9,	/* Clock  9 */
+	CPM_CLK10,	/* Clock 10 */
+	CPM_CLK11,	/* Clock 11 */
+	CPM_CLK12,	/* Clock 12 */
+	CPM_CLK13,	/* Clock 13 */
+	CPM_CLK14,	/* Clock 14 */
+	CPM_CLK15,	/* Clock 15 */
+	CPM_CLK16,	/* Clock 16 */
+	CPM_CLK17,	/* Clock 17 */
+	CPM_CLK18,	/* Clock 18 */
+	CPM_CLK19,	/* Clock 19 */
+	CPM_CLK20,	/* Clock 20 */
+	CPM_CLK_DUMMY
+};
+
+extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
 
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */

include/asm-ppc/fs_pd.h

+/*
+ * Platform information definitions.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_PD_H
+#define FS_PD_H
+
+static inline int uart_baudrate(void)
+{
+	int baud;
+	bd_t *bd = (bd_t *) __res;
+
+	if (bd->bi_baudrate)
+		baud = bd->bi_baudrate;
+	else
+		baud = -1;
+	return baud;
+}
+
+static inline int uart_clock(void)
+{
+	return (((bd_t *) __res)->bi_intfreq);
+}
+
+#define cpm2_map(member)	(&cpm2_immr->member)
+#define cpm2_map_size(member, size)	(&cpm2_immr->member)
+#define cpm2_unmap(addr)        do {} while(0)
+
+#endif

include/asm-ppc/rheap.h

@@ -62,6 +62,10 @@ extern int rh_attach_region(rh_info_t * info, void *start, int size);
 /* Detach a free region */
 extern void *rh_detach_region(rh_info_t * info, void *start, int size);
 
+/* Allocate the given size from the remote heap (with alignment) */
+extern void *rh_alloc_align(rh_info_t * info, int size, int alignment,
+		const char *owner);
+
 /* Allocate the given size from the remote heap */
 extern void *rh_alloc(rh_info_t * info, int size, const char *owner);
 

include/linux/fs_enet_pd.h

@@ -55,6 +55,30 @@ static inline int fs_get_scc_index(enum fs_id id)
 	return -1;
 }
 
+static inline int fs_fec_index2id(int index)
+{
+	int id = fsid_fec1 + index - 1;
+	if (id >= fsid_fec1 && id <= fsid_fec2)
+		return id;
+	return FS_MAX_INDEX;
+		}
+
+static inline int fs_fcc_index2id(int index)
+{
+	int id = fsid_fcc1 + index - 1;
+	if (id >= fsid_fcc1 && id <= fsid_fcc3)
+		return id;
+	return FS_MAX_INDEX;
+}
+
+static inline int fs_scc_index2id(int index)
+{
+	int id = fsid_scc1 + index - 1;
+	if (id >= fsid_scc1 && id <= fsid_scc4)
+		return id;
+	return FS_MAX_INDEX;
+}
+
 enum fs_mii_method {
 	fsmii_fixed,
 	fsmii_fec,
@@ -87,18 +111,21 @@ struct fs_mii_bb_platform_info {
 };
 
 struct fs_platform_info {
-	
-	void(*init_ioports)(void);
+
+	void(*init_ioports)(struct fs_platform_info *);
 	/* device specific information */
 	int fs_no;		/* controller index            */
+	char fs_type[4];	/* controller type             */
 
 	u32 cp_page;		/* CPM page */
 	u32 cp_block;		/* CPM sblock */
-	
+
 	u32 clk_trx;		/* some stuff for pins & mux configuration*/
+	u32 clk_rx;
+	u32 clk_tx;
 	u32 clk_route;
 	u32 clk_mask;
-	
+
 	u32 mem_offset;
 	u32 dpram_offset;
 	u32 fcc_regs_c;
@@ -124,4 +151,16 @@ struct fs_mii_fec_platform_info {
 	u32 irq[32];
 	u32 mii_speed;
 };
+
+static inline int fs_get_id(struct fs_platform_info *fpi)
+{
+	if(strstr(fpi->fs_type, "SCC"))
+		return fs_scc_index2id(fpi->fs_no);
+	if(strstr(fpi->fs_type, "FCC"))
+		return fs_fcc_index2id(fpi->fs_no);
+	if(strstr(fpi->fs_type, "FEC"))
+		return fs_fec_index2id(fpi->fs_no);
+	return fpi->fs_no;
+}
+
 #endif

include/linux/fs_uart_pd.h

@@ -46,15 +46,27 @@ static inline int fs_uart_id_fsid2smc(int id)
 }
 
 struct fs_uart_platform_info {
-        void(*init_ioports)(void);
+        void(*init_ioports)(struct fs_uart_platform_info *);
 	/* device specific information */
 	int fs_no;		/* controller index */
+	char fs_type[4];        /* controller type  */
 	u32 uart_clk;
 	u8 tx_num_fifo;
 	u8 tx_buf_size;
 	u8 rx_num_fifo;
 	u8 rx_buf_size;
 	u8 brg;
+	u8 clk_rx;
+	u8 clk_tx;
 };
 
+static inline int fs_uart_get_id(struct fs_uart_platform_info *fpi)
+{
+        if(strstr(fpi->fs_type, "SMC"))
+                return fs_uart_id_smc2fsid(fpi->fs_no);
+        if(strstr(fpi->fs_type, "SCC"))
+                return fs_uart_id_scc2fsid(fpi->fs_no);
+        return fpi->fs_no;
+}
+
 #endif