Merge tag 'hwmon-for-linus-v4.12' of...

Merge tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - removed twl4030-madc driver

 - added ASPEED PWM/fan driver

 - various minor improvements and fixes in several drivers

* tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (twl4030-madc) drop driver
  hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macro
  hwmon: (adt7475) set start bit in probe
  hwmon: (ina209) Handled signed registers
  hwmon: (lm87) Add OF device ID table
  hwmon: (lm87) Remove unused I2C devices driver_data
  drivers: hwmon: Support for ASPEED PWM/Fan tach
  Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver
  hwmon: (lm87) Allow channel data to be set from dts file
  Documentation: dtb: lm87: Add hwmon binding documentation
  hwmon: (ads7828) Accept optional parameters from device tree
  hwmon: (dell-smm) Add Dell XPS 15 9560 into DMI list
  hwmon: Constify str parameter of hwmon_ops->read_string
  dt: Add vendor prefix for Sensirion
  hwmon: (tmp421) Add OF device ID table
  hwmon: (tmp103) Add OF device ID table
  hwmon: (tmp102) Add OF device ID table
  hwmon: (stts751) Add OF device ID table
  hwmon: (ucd9200) Add OF device ID table
  hwmon: (ucd9000) Add OF device ID table
  ...

Documentation/devicetree/bindings/hwmon/ads7828.txt

+ads7828 properties
+
+Required properties:
+- compatible: Should be one of
+	       ti,ads7828
+	       ti,ads7830
+- reg: I2C address
+
+Optional properties:
+
+- ti,differential-input
+  Set to use the device in differential mode.
+- vref-supply
+  The external reference on the device is set to this regulators output. If it
+  does not exists the internal reference will be used and output by the ads78xx
+  on the "external vref" pin.
+
+  Example ADS7828 node:
+
+  ads7828: ads@48 {
+	   comatible = "ti,ads7828";
+	   reg = <0x48>;
+	   vref-supply = <&vref>;
+	   ti,differential-input;
+  };

Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt

+ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 8 fans supported. Each fan can have one PWM output and
+one/two Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 1.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and
+	       "aspeed,ast2500-pwm-tacho" for AST2500.
+
+- clocks : a fixed clock providing input clock frequency(PWM
+	   and Fan Tach clock)
+
+fan subnode format:
+===================
+Under fan subnode there can upto 8 child nodes, with each child node
+representing a fan. If there are 8 fans each fan can have one PWM port and
+one/two Fan tach inputs.
+
+Required properties for each child node:
+- reg : should specify PWM source port.
+	integer value in the range 0 to 7 with 0 indicating PWM port A and
+	7 indicating PWM port H.
+
+- aspeed,fan-tach-ch : should specify the Fan tach input channel.
+                integer value in the range 0 through 15, with 0 indicating
+		Fan tach channel 0 and 15 indicating Fan tach channel 15.
+		Atleast one Fan tach input channel is required.
+
+Examples:
+
+pwm_tacho_fixed_clk: fixedclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <24000000>;
+};
+
+pwm_tacho: pwmtachocontroller@1e786000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x1E786000 0x1000>;
+	compatible = "aspeed,ast2500-pwm-tacho";
+	clocks = <&pwm_tacho_fixed_clk>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>;
+	};
+};

Documentation/devicetree/bindings/hwmon/lm87.txt

+*LM87 hwmon sensor.
+
+Required properties:
+- compatible: Should be
+	"ti,lm87"
+
+- reg: I2C address
+
+optional properties:
+- has-temp3: This configures pins 18 and 19 to be used as a second
+             remote temperature sensing channel. By default the pins
+             are configured as voltage input pins in0 and in5.
+
+- has-in6: When set, pin 5 is configured to be used as voltage input
+           in6. Otherwise the pin is set as FAN1 input.
+
+- has-in7: When set, pin 6 is configured to be used as voltage input
+           in7. Otherwise the pin is set as FAN2 input.
+
+- vcc-supply: a Phandle for the regulator supplying power, can be
+              cofigured to measure 5.0V power supply. Default is 3.3V.
+
+Example:
+
+lm87@2e {
+	compatible = "ti,lm87";
+	reg = <0x2e>;
+	has-temp3;
+	vcc-supply = <&reg_5v0>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -265,6 +265,7 @@ sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC
 semtech	Semtech Corporation
+sensirion	Sensirion AG
 sgx	SGX Sensortech
 sharp	Sharp Corporation
 si-en	Si-En Technology Ltd.

Documentation/hwmon/aspeed-pwm-tacho

+Kernel driver aspeed-pwm-tacho
+==============================
+
+Supported chips:
+	ASPEED AST2400/2500
+
+Authors:
+	<jaghu@google.com>
+
+Description:
+------------
+This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
+controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
+controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+
+pwmX		rw	get or set PWM fan control value. This is an integer
+			value between 0(off) and 255(full speed).

Documentation/hwmon/tc654

@@ -2,7 +2,7 @@ Kernel driver tc654
 ===================
 
 Supported chips:
-  * Microship TC654 and TC655
+  * Microchip TC654 and TC655
     Prefix: 'tc654'
     Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf
 

drivers/hwmon/Kconfig

@@ -341,6 +341,15 @@ config SENSORS_ASB100
 	  This driver can also be built as a module.  If so, the module
 	  will be called asb100.
 
+config SENSORS_ASPEED
+	tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
+	help
+	  This driver provides support for ASPEED AST2400/AST2500 PWM
+	  and Fan Tacho controllers.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called aspeed_pwm_tacho.
+
 config SENSORS_ATXP1
 	tristate "Attansic ATXP1 VID controller"
 	depends on I2C
@@ -1643,16 +1652,6 @@ config SENSORS_TMP421
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp421.
 
-config SENSORS_TWL4030_MADC
-	tristate "Texas Instruments TWL4030 MADC Hwmon"
-	depends on TWL4030_MADC
-	help
-	If you say yes here you get hwmon support for triton
-	TWL4030-MADC.
-
-	This driver can also be built as a module. If so it will be called
-	twl4030-madc-hwmon.
-
 config SENSORS_VEXPRESS
 	tristate "Versatile Express"
 	depends on VEXPRESS_CONFIG

drivers/hwmon/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
+obj-$(CONFIG_SENSORS_ASPEED)	+= aspeed-pwm-tacho.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
@@ -157,7 +158,6 @@ obj-$(CONFIG_SENSORS_TMP103)	+= tmp103.o
 obj-$(CONFIG_SENSORS_TMP108)	+= tmp108.o
 obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
 obj-$(CONFIG_SENSORS_TMP421)	+= tmp421.o
-obj-$(CONFIG_SENSORS_TWL4030_MADC)+= twl4030-madc-hwmon.o
 obj-$(CONFIG_SENSORS_VEXPRESS)	+= vexpress-hwmon.o
 obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o

drivers/hwmon/ad7414.c

@@ -217,9 +217,16 @@ static const struct i2c_device_id ad7414_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ad7414_id);
 
+static const struct of_device_id ad7414_of_match[] = {
+	{ .compatible = "ad,ad7414" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7414_of_match);
+
 static struct i2c_driver ad7414_driver = {
 	.driver = {
 		.name	= "ad7414",
+		.of_match_table = of_match_ptr(ad7414_of_match),
 	},
 	.probe	= ad7414_probe,
 	.id_table = ad7414_id,

drivers/hwmon/adc128d818.c

@@ -546,10 +546,17 @@ static const struct i2c_device_id adc128_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, adc128_id);
 
+static const struct of_device_id adc128_of_match[] = {
+	{ .compatible = "ti,adc128d818" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adc128_of_match);
+
 static struct i2c_driver adc128_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adc128d818",
+		.of_match_table = of_match_ptr(adc128_of_match),
 	},
 	.probe		= adc128_probe,
 	.remove		= adc128_remove,

drivers/hwmon/ads1015.c

@@ -31,6 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/of.h>
 
 #include <linux/i2c/ads1015.h>
@@ -268,7 +269,12 @@ static int ads1015_probe(struct i2c_client *client,
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-	data->id = id->driver_data;
+
+	if (client->dev.of_node)
+		data->id = (enum ads1015_chips)
+			of_device_get_match_data(&client->dev);
+	else
+		data->id = id->driver_data;
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
@@ -303,9 +309,23 @@ static const struct i2c_device_id ads1015_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ads1015_id);
 
+static const struct of_device_id ads1015_of_match[] = {
+	{
+		.compatible = "ti,ads1015",
+		.data = (void *)ads1015
+	},
+	{
+		.compatible = "ti,ads1115",
+		.data = (void *)ads1115
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ads1015_of_match);
+
 static struct i2c_driver ads1015_driver = {
 	.driver = {
 		.name = "ads1015",
+		.of_match_table = of_match_ptr(ads1015_of_match),
 	},
 	.probe = ads1015_probe,
 	.remove = ads1015_remove,

drivers/hwmon/ads7828.c

@@ -31,9 +31,11 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_data/ads7828.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/regulator/consumer.h>
 
 /* The ADS7828 registers */
 #define ADS7828_CMD_SD_SE	0x80	/* Single ended inputs */
@@ -118,9 +120,12 @@ static int ads7828_probe(struct i2c_client *client,
 	struct ads7828_data *data;
 	struct device *hwmon_dev;
 	unsigned int vref_mv = ADS7828_INT_VREF_MV;
+	unsigned int vref_uv;
 	bool diff_input = false;
 	bool ext_vref = false;
 	unsigned int regval;
+	enum ads7828_chips chip;
+	struct regulator *reg;
 
 	data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
 	if (!data)
@@ -131,14 +136,32 @@ static int ads7828_probe(struct i2c_client *client,
 		ext_vref = pdata->ext_vref;
 		if (ext_vref && pdata->vref_mv)
 			vref_mv = pdata->vref_mv;
+	} else if (dev->of_node) {
+		diff_input = of_property_read_bool(dev->of_node,
+						   "ti,differential-input");
+		reg = devm_regulator_get_optional(dev, "vref");
+		if (!IS_ERR(reg)) {
+			vref_uv = regulator_get_voltage(reg);
+			vref_mv = DIV_ROUND_CLOSEST(vref_uv, 1000);
+			if (vref_mv < ADS7828_EXT_VREF_MV_MIN ||
+			    vref_mv > ADS7828_EXT_VREF_MV_MAX)
+				return -EINVAL;
+			ext_vref = true;
+		}
 	}
 
+	if (client->dev.of_node)
+		chip = (enum ads7828_chips)
+			of_device_get_match_data(&client->dev);
+	else
+		chip = id->driver_data;
+
 	/* Bound Vref with min/max values */
 	vref_mv = clamp_val(vref_mv, ADS7828_EXT_VREF_MV_MIN,
 			    ADS7828_EXT_VREF_MV_MAX);
 
 	/* ADS7828 uses 12-bit samples, while ADS7830 is 8-bit */
-	if (id->driver_data == ads7828) {
+	if (chip == ads7828) {
 		data->lsb_resol = DIV_ROUND_CLOSEST(vref_mv * 1000, 4096);
 		data->regmap = devm_regmap_init_i2c(client,
 						    &ads2828_regmap_config);
@@ -177,9 +200,23 @@ static const struct i2c_device_id ads7828_device_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ads7828_device_ids);
 
+static const struct of_device_id ads7828_of_match[] = {
+	{
+		.compatible = "ti,ads7828",
+		.data = (void *)ads7828
+	},
+	{
+		.compatible = "ti,ads7830",
+		.data = (void *)ads7830
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ads7828_of_match);
+
 static struct i2c_driver ads7828_driver = {
 	.driver = {
 		.name = "ads7828",
+		.of_match_table = of_match_ptr(ads7828_of_match),
 	},
 
 	.id_table = ads7828_device_ids,

drivers/hwmon/adt7475.c

@@ -13,6 +13,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
@@ -58,6 +59,8 @@
 #define REG_VENDID		0x3E
 #define REG_DEVID2		0x3F
 
+#define REG_CONFIG1		0x40
+
 #define REG_STATUS1		0x41
 #define REG_STATUS2		0x42
 
@@ -161,6 +164,27 @@ static const struct i2c_device_id adt7475_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, adt7475_id);
 
+static const struct of_device_id adt7475_of_match[] = {
+	{
+		.compatible = "adi,adt7473",
+		.data = (void *)adt7473
+	},
+	{
+		.compatible = "adi,adt7475",
+		.data = (void *)adt7475
+	},
+	{
+		.compatible = "adi,adt7476",
+		.data = (void *)adt7476
+	},
+	{
+		.compatible = "adi,adt7490",
+		.data = (void *)adt7490
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adt7475_of_match);
+
 struct adt7475_data {
 	struct device *hwmon_dev;
 	struct mutex lock;
@@ -1250,6 +1274,7 @@ static void adt7475_remove_files(struct i2c_client *client,
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	enum chips chip;
 	static const char * const names[] = {
 		[adt7473] = "ADT7473",
 		[adt7475] = "ADT7475",
@@ -1268,8 +1293,13 @@ static int adt7475_probe(struct i2c_client *client,
 	mutex_init(&data->lock);
 	i2c_set_clientdata(client, data);
 
+	if (client->dev.of_node)
+		chip = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		chip = id->driver_data;
+
 	/* Initialize device-specific values */
-	switch (id->driver_data) {
+	switch (chip) {
 	case adt7476:
 		data->has_voltage = 0x0e;	/* in1 to in3 */
 		revision = adt7475_read(REG_DEVID2) & 0x07;
@@ -1343,6 +1373,17 @@ static int adt7475_probe(struct i2c_client *client,
 	for (i = 0; i < ADT7475_PWM_COUNT; i++)
 		adt7475_read_pwm(client, i);
 
+	/* Start monitoring */
+	switch (chip) {
+	case adt7475:
+	case adt7476:
+		i2c_smbus_write_byte_data(client, REG_CONFIG1,
+					  adt7475_read(REG_CONFIG1) | 0x01);
+		break;
+	default:
+		break;
+	}
+
 	ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
 	if (ret)
 		return ret;
@@ -1428,6 +1469,7 @@ static struct i2c_driver adt7475_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adt7475",
+		.of_match_table = of_match_ptr(adt7475_of_match),
 	},
 	.probe		= adt7475_probe,
 	.remove		= adt7475_remove,

drivers/hwmon/aspeed-pwm-tacho.c

+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 or later as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sysfs.h>
+#include <linux/regmap.h>
+
+/* ASPEED PWM & FAN Tach Register Definition */
+#define ASPEED_PTCR_CTRL		0x00
+#define ASPEED_PTCR_CLK_CTRL		0x04
+#define ASPEED_PTCR_DUTY0_CTRL		0x08
+#define ASPEED_PTCR_DUTY1_CTRL		0x0c
+#define ASPEED_PTCR_TYPEM_CTRL		0x10
+#define ASPEED_PTCR_TYPEM_CTRL1		0x14
+#define ASPEED_PTCR_TYPEN_CTRL		0x18
+#define ASPEED_PTCR_TYPEN_CTRL1		0x1c
+#define ASPEED_PTCR_TACH_SOURCE		0x20
+#define ASPEED_PTCR_TRIGGER		0x28
+#define ASPEED_PTCR_RESULT		0x2c
+#define ASPEED_PTCR_INTR_CTRL		0x30
+#define ASPEED_PTCR_INTR_STS		0x34
+#define ASPEED_PTCR_TYPEM_LIMIT		0x38
+#define ASPEED_PTCR_TYPEN_LIMIT		0x3C
+#define ASPEED_PTCR_CTRL_EXT		0x40
+#define ASPEED_PTCR_CLK_CTRL_EXT	0x44
+#define ASPEED_PTCR_DUTY2_CTRL		0x48
+#define ASPEED_PTCR_DUTY3_CTRL		0x4c
+#define ASPEED_PTCR_TYPEO_CTRL		0x50
+#define ASPEED_PTCR_TYPEO_CTRL1		0x54
+#define ASPEED_PTCR_TACH_SOURCE_EXT	0x60
+#define ASPEED_PTCR_TYPEO_LIMIT		0x78
+
+/* ASPEED_PTCR_CTRL : 0x00 - General Control Register */
+#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1	15
+#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2	6
+#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK	(BIT(7) | BIT(15))
+
+#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1	14
+#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2	5
+#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK	(BIT(6) | BIT(14))
+
+#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1	13
+#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2	4
+#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK	(BIT(5) | BIT(13))
+
+#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1	12
+#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2	3
+#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK	(BIT(4) | BIT(12))
+
+#define	ASPEED_PTCR_CTRL_FAN_NUM_EN(x)	BIT(16 + (x))
+
+#define	ASPEED_PTCR_CTRL_PWMD_EN	BIT(11)
+#define	ASPEED_PTCR_CTRL_PWMC_EN	BIT(10)
+#define	ASPEED_PTCR_CTRL_PWMB_EN	BIT(9)
+#define	ASPEED_PTCR_CTRL_PWMA_EN	BIT(8)
+
+#define	ASPEED_PTCR_CTRL_CLK_SRC	BIT(1)
+#define	ASPEED_PTCR_CTRL_CLK_EN		BIT(0)
+
+/* ASPEED_PTCR_CLK_CTRL : 0x04 - Clock Control Register */
+/* TYPE N */
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_MASK		GENMASK(31, 16)
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT		24
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_H		20
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_L		16
+/* TYPE M */
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_MASK         GENMASK(15, 0)
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT		8
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_H		4
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_L		0
+
+/*
+ * ASPEED_PTCR_DUTY_CTRL/1/2/3 : 0x08/0x0C/0x48/0x4C - PWM-FAN duty control
+ * 0/1/2/3 register
+ */
+#define DUTY_CTRL_PWM2_FALL_POINT	24
+#define DUTY_CTRL_PWM2_RISE_POINT	16
+#define DUTY_CTRL_PWM2_RISE_FALL_MASK	GENMASK(31, 16)
+#define DUTY_CTRL_PWM1_FALL_POINT	8
+#define DUTY_CTRL_PWM1_RISE_POINT	0
+#define DUTY_CTRL_PWM1_RISE_FALL_MASK   GENMASK(15, 0)
+
+/* ASPEED_PTCR_TYPEM_CTRL : 0x10/0x18/0x50 - Type M/N/O Ctrl 0 Register */
+#define TYPE_CTRL_FAN_MASK		(GENMASK(5, 1) | GENMASK(31, 16))
+#define TYPE_CTRL_FAN1_MASK		GENMASK(31, 0)
+#define TYPE_CTRL_FAN_PERIOD		16
+#define TYPE_CTRL_FAN_MODE		4
+#define TYPE_CTRL_FAN_DIVISION		1
+#define TYPE_CTRL_FAN_TYPE_EN		1
+
+/* ASPEED_PTCR_TACH_SOURCE : 0x20/0x60 - Tach Source Register */
+/* bit [0,1] at 0x20, bit [2] at 0x60 */
+#define TACH_PWM_SOURCE_BIT01(x)	((x) * 2)
+#define TACH_PWM_SOURCE_BIT2(x)		((x) * 2)
+#define TACH_PWM_SOURCE_MASK_BIT01(x)	(0x3 << ((x) * 2))
+#define TACH_PWM_SOURCE_MASK_BIT2(x)	BIT((x) * 2)
+
+/* ASPEED_PTCR_RESULT : 0x2c - Result Register */
+#define RESULT_STATUS_MASK		BIT(31)
+#define RESULT_VALUE_MASK		0xfffff
+
+/* ASPEED_PTCR_CTRL_EXT : 0x40 - General Control Extension #1 Register */
+#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1	15
+#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2	6
+#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK	(BIT(7) | BIT(15))
+
+#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1	14
+#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2	5
+#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK	(BIT(6) | BIT(14))
+
+#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1	13
+#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2	4
+#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK	(BIT(5) | BIT(13))
+
+#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1	12
+#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2	3
+#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK	(BIT(4) | BIT(12))
+
+#define	ASPEED_PTCR_CTRL_PWMH_EN	BIT(11)
+#define	ASPEED_PTCR_CTRL_PWMG_EN	BIT(10)
+#define	ASPEED_PTCR_CTRL_PWMF_EN	BIT(9)
+#define	ASPEED_PTCR_CTRL_PWME_EN	BIT(8)
+
+/* ASPEED_PTCR_CLK_EXT_CTRL : 0x44 - Clock Control Extension #1 Register */
+/* TYPE O */
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_MASK         GENMASK(15, 0)
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT		8
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_H		4
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_L		0
+
+#define PWM_MAX 255
+
+#define M_PWM_DIV_H 0x00
+#define M_PWM_DIV_L 0x05
+#define M_PWM_PERIOD 0x5F
+#define M_TACH_CLK_DIV 0x00
+#define M_TACH_MODE 0x00
+#define M_TACH_UNIT 0x1000
+#define INIT_FAN_CTRL 0xFF
+
+struct aspeed_pwm_tacho_data {
+	struct regmap *regmap;
+	unsigned long clk_freq;
+	bool pwm_present[8];
+	bool fan_tach_present[16];
+	u8 type_pwm_clock_unit[3];
+	u8 type_pwm_clock_division_h[3];
+	u8 type_pwm_clock_division_l[3];
+	u8 type_fan_tach_clock_division[3];
+	u16 type_fan_tach_unit[3];
+	u8 pwm_port_type[8];
+	u8 pwm_port_fan_ctrl[8];
+	u8 fan_tach_ch_source[16];
+	const struct attribute_group *groups[3];
+};
+
+enum type { TYPEM, TYPEN, TYPEO };
+
+struct type_params {
+	u32 l_value;
+	u32 h_value;
+	u32 unit_value;
+	u32 clk_ctrl_mask;
+	u32 clk_ctrl_reg;
+	u32 ctrl_reg;
+	u32 ctrl_reg1;
+};
+
+static const struct type_params type_params[] = {
+	[TYPEM] = {
+		.l_value = ASPEED_PTCR_CLK_CTRL_TYPEM_L,
+		.h_value = ASPEED_PTCR_CLK_CTRL_TYPEM_H,
+		.unit_value = ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT,
+		.clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEM_MASK,
+		.clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL,
+		.ctrl_reg = ASPEED_PTCR_TYPEM_CTRL,
+		.ctrl_reg1 = ASPEED_PTCR_TYPEM_CTRL1,
+	},
+	[TYPEN] = {
+		.l_value = ASPEED_PTCR_CLK_CTRL_TYPEN_L,
+		.h_value = ASPEED_PTCR_CLK_CTRL_TYPEN_H,
+		.unit_value = ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT,
+		.clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEN_MASK,
+		.clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL,
+		.ctrl_reg = ASPEED_PTCR_TYPEN_CTRL,
+		.ctrl_reg1 = ASPEED_PTCR_TYPEN_CTRL1,
+	},
+	[TYPEO] = {
+		.l_value = ASPEED_PTCR_CLK_CTRL_TYPEO_L,
+		.h_value = ASPEED_PTCR_CLK_CTRL_TYPEO_H,
+		.unit_value = ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT,
+		.clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEO_MASK,
+		.clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL_EXT,
+		.ctrl_reg = ASPEED_PTCR_TYPEO_CTRL,
+		.ctrl_reg1 = ASPEED_PTCR_TYPEO_CTRL1,
+	}
+};
+
+enum pwm_port { PWMA, PWMB, PWMC, PWMD, PWME, PWMF, PWMG, PWMH };
+
+struct pwm_port_params {
+	u32 pwm_en;
+	u32 ctrl_reg;
+	u32 type_part1;
+	u32 type_part2;
+	u32 type_mask;
+	u32 duty_ctrl_rise_point;
+	u32 duty_ctrl_fall_point;
+	u32 duty_ctrl_reg;
+	u32 duty_ctrl_rise_fall_mask;
+};
+
+static const struct pwm_port_params pwm_port_params[] = {
+	[PWMA] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMA_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
+	},
+	[PWMB] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMB_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
+	},
+	[PWMC] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMC_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
+	},
+	[PWMD] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMD_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
+	},
+	[PWME] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWME_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
+	},
+	[PWMF] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMF_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
+	},
+	[PWMG] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMG_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
+	},
+	[PWMH] = {
+		.pwm_en = ASPEED_PTCR_CTRL_PWMH_EN,
+		.ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+		.type_part1 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1,
+		.type_part2 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2,
+		.type_mask = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK,
+		.duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+		.duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+		.duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL,
+		.duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
+	}
+};
+
+static int regmap_aspeed_pwm_tacho_reg_write(void *context, unsigned int reg,
+					     unsigned int val)
+{
+	void __iomem *regs = (void __iomem *)context;
+
+	writel(val, regs + reg);
+	return 0;
+}
+
+static int regmap_aspeed_pwm_tacho_reg_read(void *context, unsigned int reg,
+					    unsigned int *val)
+{
+	void __iomem *regs = (void __iomem *)context;
+
+	*val = readl(regs + reg);
+	return 0;
+}
+
+static const struct regmap_config aspeed_pwm_tacho_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = ASPEED_PTCR_TYPEO_LIMIT,
+	.reg_write = regmap_aspeed_pwm_tacho_reg_write,
+	.reg_read = regmap_aspeed_pwm_tacho_reg_read,
+	.fast_io = true,
+};
+
+static void aspeed_set_clock_enable(struct regmap *regmap, bool val)
+{
+	regmap_update_bits(regmap, ASPEED_PTCR_CTRL,
+			   ASPEED_PTCR_CTRL_CLK_EN,
+			   val ? ASPEED_PTCR_CTRL_CLK_EN : 0);
+}
+
+static void aspeed_set_clock_source(struct regmap *regmap, int val)
+{
+	regmap_update_bits(regmap, ASPEED_PTCR_CTRL,
+			   ASPEED_PTCR_CTRL_CLK_SRC,
+			   val ? ASPEED_PTCR_CTRL_CLK_SRC : 0);
+}
+
+static void aspeed_set_pwm_clock_values(struct regmap *regmap, u8 type,
+					u8 div_high, u8 div_low, u8 unit)
+{
+	u32 reg_value = ((div_high << type_params[type].h_value) |
+			 (div_low << type_params[type].l_value) |
+			 (unit << type_params[type].unit_value));
+
+	regmap_update_bits(regmap, type_params[type].clk_ctrl_reg,
+			   type_params[type].clk_ctrl_mask, reg_value);
+}
+
+static void aspeed_set_pwm_port_enable(struct regmap *regmap, u8 pwm_port,
+				       bool enable)
+{
+	regmap_update_bits(regmap, pwm_port_params[pwm_port].ctrl_reg,
+			   pwm_port_params[pwm_port].pwm_en,
+			   enable ? pwm_port_params[pwm_port].pwm_en : 0);
+}
+
+static void aspeed_set_pwm_port_type(struct regmap *regmap,
+				     u8 pwm_port, u8 type)
+{
+	u32 reg_value = (type & 0x1) << pwm_port_params[pwm_port].type_part1;
+
+	reg_value |= (type & 0x2) << pwm_port_params[pwm_port].type_part2;
+
+	regmap_update_bits(regmap, pwm_port_params[pwm_port].ctrl_reg,
+			   pwm_port_params[pwm_port].type_mask, reg_value);
+}
+
+static void aspeed_set_pwm_port_duty_rising_falling(struct regmap *regmap,
+						    u8 pwm_port, u8 rising,
+						    u8 falling)
+{
+	u32 reg_value = (rising <<
+			 pwm_port_params[pwm_port].duty_ctrl_rise_point);
+	reg_value |= (falling <<
+		      pwm_port_params[pwm_port].duty_ctrl_fall_point);
+
+	regmap_update_bits(regmap, pwm_port_params[pwm_port].duty_ctrl_reg,
+			   pwm_port_params[pwm_port].duty_ctrl_rise_fall_mask,
+			   reg_value);
+}
+
+static void aspeed_set_tacho_type_enable(struct regmap *regmap, u8 type,
+					 bool enable)
+{
+	regmap_update_bits(regmap, type_params[type].ctrl_reg,
+			   TYPE_CTRL_FAN_TYPE_EN,
+			   enable ? TYPE_CTRL_FAN_TYPE_EN : 0);
+}
+
+static void aspeed_set_tacho_type_values(struct regmap *regmap, u8 type,
+					 u8 mode, u16 unit, u8 division)
+{
+	u32 reg_value = ((mode << TYPE_CTRL_FAN_MODE) |
+			 (unit << TYPE_CTRL_FAN_PERIOD) |
+			 (division << TYPE_CTRL_FAN_DIVISION));
+
+	regmap_update_bits(regmap, type_params[type].ctrl_reg,
+			   TYPE_CTRL_FAN_MASK, reg_value);
+	regmap_update_bits(regmap, type_params[type].ctrl_reg1,
+			   TYPE_CTRL_FAN1_MASK, unit << 16);
+}
+
+static void aspeed_set_fan_tach_ch_enable(struct regmap *regmap, u8 fan_tach_ch,
+					  bool enable)
+{
+	regmap_update_bits(regmap, ASPEED_PTCR_CTRL,
+			   ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch),
+			   enable ?
+			   ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch) : 0);
+}
+
+static void aspeed_set_fan_tach_ch_source(struct regmap *regmap, u8 fan_tach_ch,
+					  u8 fan_tach_ch_source)
+{
+	u32 reg_value1 = ((fan_tach_ch_source & 0x3) <<
+			  TACH_PWM_SOURCE_BIT01(fan_tach_ch));
+	u32 reg_value2 = (((fan_tach_ch_source & 0x4) >> 2) <<
+			  TACH_PWM_SOURCE_BIT2(fan_tach_ch));
+
+	regmap_update_bits(regmap, ASPEED_PTCR_TACH_SOURCE,
+			   TACH_PWM_SOURCE_MASK_BIT01(fan_tach_ch),
+			   reg_value1);
+
+	regmap_update_bits(regmap, ASPEED_PTCR_TACH_SOURCE_EXT,
+			   TACH_PWM_SOURCE_MASK_BIT2(fan_tach_ch),
+			   reg_value2);
+}
+
+static void aspeed_set_pwm_port_fan_ctrl(struct aspeed_pwm_tacho_data *priv,
+					 u8 index, u8 fan_ctrl)
+{
+	u16 period, dc_time_on;
+
+	period = priv->type_pwm_clock_unit[priv->pwm_port_type[index]];
+	period += 1;
+	dc_time_on = (fan_ctrl * period) / PWM_MAX;
+
+	if (dc_time_on == 0) {
+		aspeed_set_pwm_port_enable(priv->regmap, index, false);
+	} else {
+		if (dc_time_on == period)
+			dc_time_on = 0;
+
+		aspeed_set_pwm_port_duty_rising_falling(priv->regmap, index, 0,
+							dc_time_on);
+		aspeed_set_pwm_port_enable(priv->regmap, index, true);
+	}
+}
+
+static u32 aspeed_get_fan_tach_ch_measure_period(struct aspeed_pwm_tacho_data
+						 *priv, u8 type)
+{
+	u32 clk;
+	u16 tacho_unit;
+	u8 clk_unit, div_h, div_l, tacho_div;
+
+	clk = priv->clk_freq;
+	clk_unit = priv->type_pwm_clock_unit[type];
+	div_h = priv->type_pwm_clock_division_h[type];
+	div_h = 0x1 << div_h;
+	div_l = priv->type_pwm_clock_division_l[type];
+	if (div_l == 0)
+		div_l = 1;
+	else
+		div_l = div_l * 2;
+
+	tacho_unit = priv->type_fan_tach_unit[type];
+	tacho_div = priv->type_fan_tach_clock_division[type];
+
+	tacho_div = 0x4 << (tacho_div * 2);
+	return clk / (clk_unit * div_h * div_l * tacho_div * tacho_unit);
+}
+
+static u32 aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv,
+				      u8 fan_tach_ch)
+{
+	u32 raw_data, tach_div, clk_source, sec, val;
+	u8 fan_tach_ch_source, type;
+
+	regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0);
+	regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0x1 << fan_tach_ch);
+
+	fan_tach_ch_source = priv->fan_tach_ch_source[fan_tach_ch];
+	type = priv->pwm_port_type[fan_tach_ch_source];
+
+	sec = (1000 / aspeed_get_fan_tach_ch_measure_period(priv, type));
+	msleep(sec);
+
+	regmap_read(priv->regmap, ASPEED_PTCR_RESULT, &val);
+	raw_data = val & RESULT_VALUE_MASK;
+	tach_div = priv->type_fan_tach_clock_division[type];
+	tach_div = 0x4 << (tach_div * 2);
+	clk_source = priv->clk_freq;
+
+	if (raw_data == 0)
+		return 0;
+
+	return (clk_source * 60) / (2 * raw_data * tach_div);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int index = sensor_attr->index;
+	int ret;
+	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+	long fan_ctrl;
+
+	ret = kstrtol(buf, 10, &fan_ctrl);
+	if (ret != 0)
+		return ret;
+
+	if (fan_ctrl < 0 || fan_ctrl > PWM_MAX)
+		return -EINVAL;
+
+	if (priv->pwm_port_fan_ctrl[index] == fan_ctrl)
+		return count;
+
+	priv->pwm_port_fan_ctrl[index] = fan_ctrl;
+	aspeed_set_pwm_port_fan_ctrl(priv, index, fan_ctrl);
+
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int index = sensor_attr->index;
+	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", priv->pwm_port_fan_ctrl[index]);
+}
+
+static ssize_t show_rpm(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int index = sensor_attr->index;
+	u32 rpm;
+	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+
+	rpm = aspeed_get_fan_tach_ch_rpm(priv, index);
+
+	return sprintf(buf, "%u\n", rpm);
+}
+
+static umode_t pwm_is_visible(struct kobject *kobj,
+			      struct attribute *a, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+
+	if (!priv->pwm_present[index])
+		return 0;
+	return a->mode;
+}
+
+static umode_t fan_dev_is_visible(struct kobject *kobj,
+				  struct attribute *a, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+
+	if (!priv->fan_tach_present[index])
+		return 0;
+	return a->mode;
+}
+
+static SENSOR_DEVICE_ATTR(pwm0, 0644,
+			show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1, 0644,
+			show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2, 0644,
+			show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm3, 0644,
+			show_pwm, set_pwm, 3);
+static SENSOR_DEVICE_ATTR(pwm4, 0644,
+			show_pwm, set_pwm, 4);
+static SENSOR_DEVICE_ATTR(pwm5, 0644,
+			show_pwm, set_pwm, 5);
+static SENSOR_DEVICE_ATTR(pwm6, 0644,
+			show_pwm, set_pwm, 6);
+static SENSOR_DEVICE_ATTR(pwm7, 0644,
+			show_pwm, set_pwm, 7);
+static struct attribute *pwm_dev_attrs[] = {
+	&sensor_dev_attr_pwm0.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm4.dev_attr.attr,
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm7.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group pwm_dev_group = {
+	.attrs = pwm_dev_attrs,
+	.is_visible = pwm_is_visible,
+};
+
+static SENSOR_DEVICE_ATTR(fan0_input, 0444,
+		show_rpm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_input, 0444,
+		show_rpm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_input, 0444,
+		show_rpm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan3_input, 0444,
+		show_rpm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan4_input, 0444,
+		show_rpm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan5_input, 0444,
+		show_rpm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan6_input, 0444,
+		show_rpm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan7_input, 0444,
+		show_rpm, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan8_input, 0444,
+		show_rpm, NULL, 8);
+static SENSOR_DEVICE_ATTR(fan9_input, 0444,
+		show_rpm, NULL, 9);
+static SENSOR_DEVICE_ATTR(fan10_input, 0444,
+		show_rpm, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan11_input, 0444,
+		show_rpm, NULL, 11);
+static SENSOR_DEVICE_ATTR(fan12_input, 0444,
+		show_rpm, NULL, 12);
+static SENSOR_DEVICE_ATTR(fan13_input, 0444,
+		show_rpm, NULL, 13);
+static SENSOR_DEVICE_ATTR(fan14_input, 0444,
+		show_rpm, NULL, 14);
+static SENSOR_DEVICE_ATTR(fan15_input, 0444,
+		show_rpm, NULL, 15);
+static struct attribute *fan_dev_attrs[] = {
+	&sensor_dev_attr_fan0_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan6_input.dev_attr.attr,
+	&sensor_dev_attr_fan7_input.dev_attr.attr,
+	&sensor_dev_attr_fan8_input.dev_attr.attr,
+	&sensor_dev_attr_fan9_input.dev_attr.attr,
+	&sensor_dev_attr_fan10_input.dev_attr.attr,
+	&sensor_dev_attr_fan11_input.dev_attr.attr,
+	&sensor_dev_attr_fan12_input.dev_attr.attr,
+	&sensor_dev_attr_fan13_input.dev_attr.attr,
+	&sensor_dev_attr_fan14_input.dev_attr.attr,
+	&sensor_dev_attr_fan15_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group fan_dev_group = {
+	.attrs = fan_dev_attrs,
+	.is_visible = fan_dev_is_visible,
+};
+
+/*
+ * The clock type is type M :
+ * The PWM frequency = 24MHz / (type M clock division L bit *
+ * type M clock division H bit * (type M PWM period bit + 1))
+ */
+static void aspeed_create_type(struct aspeed_pwm_tacho_data *priv)
+{
+	priv->type_pwm_clock_division_h[TYPEM] = M_PWM_DIV_H;
+	priv->type_pwm_clock_division_l[TYPEM] = M_PWM_DIV_L;
+	priv->type_pwm_clock_unit[TYPEM] = M_PWM_PERIOD;
+	aspeed_set_pwm_clock_values(priv->regmap, TYPEM, M_PWM_DIV_H,
+				    M_PWM_DIV_L, M_PWM_PERIOD);
+	aspeed_set_tacho_type_enable(priv->regmap, TYPEM, true);
+	priv->type_fan_tach_clock_division[TYPEM] = M_TACH_CLK_DIV;
+	priv->type_fan_tach_unit[TYPEM] = M_TACH_UNIT;
+	aspeed_set_tacho_type_values(priv->regmap, TYPEM, M_TACH_MODE,
+				     M_TACH_UNIT, M_TACH_CLK_DIV);
+}
+
+static void aspeed_create_pwm_port(struct aspeed_pwm_tacho_data *priv,
+				   u8 pwm_port)
+{
+	aspeed_set_pwm_port_enable(priv->regmap, pwm_port, true);
+	priv->pwm_present[pwm_port] = true;
+
+	priv->pwm_port_type[pwm_port] = TYPEM;
+	aspeed_set_pwm_port_type(priv->regmap, pwm_port, TYPEM);
+
+	priv->pwm_port_fan_ctrl[pwm_port] = INIT_FAN_CTRL;
+	aspeed_set_pwm_port_fan_ctrl(priv, pwm_port, INIT_FAN_CTRL);
+}
+
+static void aspeed_create_fan_tach_channel(struct aspeed_pwm_tacho_data *priv,
+					   u8 *fan_tach_ch,
+					   int count,
+					   u8 pwm_source)
+{
+	u8 val, index;
+
+	for (val = 0; val < count; val++) {
+		index = fan_tach_ch[val];
+		aspeed_set_fan_tach_ch_enable(priv->regmap, index, true);
+		priv->fan_tach_present[index] = true;
+		priv->fan_tach_ch_source[index] = pwm_source;
+		aspeed_set_fan_tach_ch_source(priv->regmap, index, pwm_source);
+	}
+}
+
+static int aspeed_create_fan(struct device *dev,
+			     struct device_node *child,
+			     struct aspeed_pwm_tacho_data *priv)
+{
+	u8 *fan_tach_ch;
+	u32 pwm_port;
+	int ret, count;
+
+	ret = of_property_read_u32(child, "reg", &pwm_port);
+	if (ret)
+		return ret;
+	aspeed_create_pwm_port(priv, (u8)pwm_port);
+
+	count = of_property_count_u8_elems(child, "aspeed,fan-tach-ch");
+	if (count < 1)
+		return -EINVAL;
+	fan_tach_ch = devm_kzalloc(dev, sizeof(*fan_tach_ch) * count,
+				   GFP_KERNEL);
+	if (!fan_tach_ch)
+		return -ENOMEM;
+	ret = of_property_read_u8_array(child, "aspeed,fan-tach-ch",
+					fan_tach_ch, count);
+	if (ret)
+		return ret;
+	aspeed_create_fan_tach_channel(priv, fan_tach_ch, count, pwm_port);
+
+	return 0;
+}
+
+static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np, *child;
+	struct aspeed_pwm_tacho_data *priv;
+	void __iomem *regs;
+	struct resource *res;
+	struct device *hwmon;
+	struct clk *clk;
+	int ret;
+
+	np = dev->of_node;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->regmap = devm_regmap_init(dev, NULL, (__force void *)regs,
+			&aspeed_pwm_tacho_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+	regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE, 0);
+	regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE_EXT, 0);
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return -ENODEV;
+	priv->clk_freq = clk_get_rate(clk);
+	aspeed_set_clock_enable(priv->regmap, true);
+	aspeed_set_clock_source(priv->regmap, 0);
+
+	aspeed_create_type(priv);
+
+	for_each_child_of_node(np, child) {
+		ret = aspeed_create_fan(dev, child, priv);
+		of_node_put(child);
+		if (ret)
+			return ret;
+	}
+	of_node_put(np);
+
+	priv->groups[0] = &pwm_dev_group;
+	priv->groups[1] = &fan_dev_group;
+	priv->groups[2] = NULL;
+	hwmon = devm_hwmon_device_register_with_groups(dev,
+						       "aspeed_pwm_tacho",
+						       priv, priv->groups);
+	return PTR_ERR_OR_ZERO(hwmon);
+}
+
+static const struct of_device_id of_pwm_tacho_match_table[] = {
+	{ .compatible = "aspeed,ast2400-pwm-tacho", },
+	{ .compatible = "aspeed,ast2500-pwm-tacho", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pwm_tacho_match_table);
+
+static struct platform_driver aspeed_pwm_tacho_driver = {
+	.probe		= aspeed_pwm_tacho_probe,
+	.driver		= {
+		.name	= "aspeed_pwm_tacho",
+		.of_match_table = of_pwm_tacho_match_table,
+	},
+};
+
+module_platform_driver(aspeed_pwm_tacho_driver);
+
+MODULE_AUTHOR("Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>");
+MODULE_DESCRIPTION("ASPEED PWM and Fan Tacho device driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/dell-smm-hwmon.c

@@ -995,6 +995,13 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = {
 		},
 		.driver_data = (void *)&i8k_config_data[DELL_XPS],
 	},
+	{
+		.ident = "Dell XPS 15 9560",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9560"),
+		},
+	},
 	{ }
 };
 

drivers/hwmon/hwmon.c

@@ -186,7 +186,7 @@ static ssize_t hwmon_attr_show_string(struct device *dev,
 				      char *buf)
 {
 	struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr);
-	char *s;
+	const char *s;
 	int ret;
 
 	ret = hattr->ops->read_string(dev, hattr->type, hattr->attr,

drivers/hwmon/ina209.c

@@ -117,7 +117,7 @@ static long ina209_from_reg(const u8 reg, const u16 val)
 	case INA209_SHUNT_VOLTAGE_POS_WARN:
 	case INA209_SHUNT_VOLTAGE_NEG_WARN:
 		/* LSB=10 uV. Convert to mV. */
-		return DIV_ROUND_CLOSEST(val, 100);
+		return DIV_ROUND_CLOSEST((s16)val, 100);
 
 	case INA209_BUS_VOLTAGE:
 	case INA209_BUS_VOLTAGE_MAX_PEAK:
@@ -146,7 +146,7 @@ static long ina209_from_reg(const u8 reg, const u16 val)
 
 	case INA209_CURRENT:
 		/* LSB=1 mA (selected). Is in mA */
-		return val;
+		return (s16)val;
 	}
 
 	/* programmer goofed */
@@ -608,11 +608,18 @@ static const struct i2c_device_id ina209_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ina209_id);
 
+static const struct of_device_id ina209_of_match[] = {
+	{ .compatible = "ti,ina209" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ina209_of_match);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver ina209_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ina209",
+		.of_match_table = of_match_ptr(ina209_of_match),
 	},
 	.probe		= ina209_probe,
 	.remove		= ina209_remove,

drivers/hwmon/ina2xx.c

@@ -34,6 +34,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/jiffies.h>
+#include <linux/of_device.h>
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/util_macros.h>
@@ -424,13 +425,19 @@ static int ina2xx_probe(struct i2c_client *client,
 	struct device *hwmon_dev;
 	u32 val;
 	int ret, group = 0;
+	enum ina2xx_ids chip;
+
+	if (client->dev.of_node)
+		chip = (enum ina2xx_ids)of_device_get_match_data(&client->dev);
+	else
+		chip = id->driver_data;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
 	/* set the device type */
-	data->config = &ina2xx_config[id->driver_data];
+	data->config = &ina2xx_config[chip];
 
 	if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
 		struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
@@ -487,9 +494,35 @@ static const struct i2c_device_id ina2xx_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ina2xx_id);
 
+static const struct of_device_id ina2xx_of_match[] = {
+	{
+		.compatible = "ti,ina219",
+		.data = (void *)ina219
+	},
+	{
+		.compatible = "ti,ina220",
+		.data = (void *)ina219
+	},
+	{
+		.compatible = "ti,ina226",
+		.data = (void *)ina226
+	},
+	{
+		.compatible = "ti,ina230",
+		.data = (void *)ina226
+	},
+	{
+		.compatible = "ti,ina231",
+		.data = (void *)ina226
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ina2xx_of_match);
+
 static struct i2c_driver ina2xx_driver = {
 	.driver = {
 		.name	= "ina2xx",
+		.of_match_table = of_match_ptr(ina2xx_of_match),
 	},
 	.probe		= ina2xx_probe,
 	.id_table	= ina2xx_id,

drivers/hwmon/lm63.c

@@ -46,6 +46,7 @@
 #include <linux/hwmon.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/sysfs.h>
 #include <linux/types.h>
 
@@ -1115,6 +1116,10 @@ static int lm63_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	/* Set the device type */
+	if (client->dev.of_node)
+		data->kind = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		data->kind = id->driver_data;
 	data->kind = id->driver_data;
 	if (data->kind == lm64)
 		data->temp2_offset = 16000;
@@ -1149,10 +1154,28 @@ static const struct i2c_device_id lm63_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm63_id);
 
+static const struct of_device_id lm63_of_match[] = {
+	{
+		.compatible = "national,lm63",
+		.data = (void *)lm63
+	},
+	{
+		.compatible = "national,lm64",
+		.data = (void *)lm64
+	},
+	{
+		.compatible = "national,lm96163",
+		.data = (void *)lm96163
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm63_of_match);
+
 static struct i2c_driver lm63_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm63",
+		.of_match_table = of_match_ptr(lm63_of_match),
 	},
 	.probe		= lm63_probe,
 	.id_table	= lm63_id,

drivers/hwmon/lm75.c

@@ -26,6 +26,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
+#include <linux/of_device.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include "lm75.h"
@@ -273,7 +274,12 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	int status, err;
 	u8 set_mask, clr_mask;
 	int new;
-	enum lm75_type kind = id->driver_data;
+	enum lm75_type kind;
+
+	if (client->dev.of_node)
+		kind = (enum lm75_type)of_device_get_match_data(&client->dev);
+	else
+		kind = id->driver_data;
 
 	if (!i2c_check_functionality(client->adapter,
 			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
@@ -424,6 +430,95 @@ static const struct i2c_device_id lm75_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm75_ids);
 
+static const struct of_device_id lm75_of_match[] = {
+	{
+		.compatible = "adi,adt75",
+		.data = (void *)adt75
+	},
+	{
+		.compatible = "dallas,ds1775",
+		.data = (void *)ds1775
+	},
+	{
+		.compatible = "dallas,ds75",
+		.data = (void *)ds75
+	},
+	{
+		.compatible = "dallas,ds7505",
+		.data = (void *)ds7505
+	},
+	{
+		.compatible = "gmt,g751",
+		.data = (void *)g751
+	},
+	{
+		.compatible = "national,lm75",
+		.data = (void *)lm75
+	},
+	{
+		.compatible = "national,lm75a",
+		.data = (void *)lm75a
+	},
+	{
+		.compatible = "national,lm75b",
+		.data = (void *)lm75b
+	},
+	{
+		.compatible = "maxim,max6625",
+		.data = (void *)max6625
+	},
+	{
+		.compatible = "maxim,max6626",
+		.data = (void *)max6626
+	},
+	{
+		.compatible = "maxim,mcp980x",
+		.data = (void *)mcp980x
+	},
+	{
+		.compatible = "st,stds75",
+		.data = (void *)stds75
+	},
+	{
+		.compatible = "microchip,tcn75",
+		.data = (void *)tcn75
+	},
+	{
+		.compatible = "ti,tmp100",
+		.data = (void *)tmp100
+	},
+	{
+		.compatible = "ti,tmp101",
+		.data = (void *)tmp101
+	},
+	{
+		.compatible = "ti,tmp105",
+		.data = (void *)tmp105
+	},
+	{
+		.compatible = "ti,tmp112",
+		.data = (void *)tmp112
+	},
+	{
+		.compatible = "ti,tmp175",
+		.data = (void *)tmp175
+	},
+	{
+		.compatible = "ti,tmp275",
+		.data = (void *)tmp275
+	},
+	{
+		.compatible = "ti,tmp75",
+		.data = (void *)tmp75
+	},
+	{
+		.compatible = "ti,tmp75c",
+		.data = (void *)tmp75c
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm75_of_match);
+
 #define LM75A_ID 0xA1
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
@@ -560,6 +655,7 @@ static struct i2c_driver lm75_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm75",
+		.of_match_table = of_match_ptr(lm75_of_match),
 		.pm	= LM75_DEV_PM_OPS,
 	},
 	.probe		= lm75_probe,

drivers/hwmon/lm85.c

@@ -25,6 +25,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
@@ -1552,7 +1553,10 @@ static int lm85_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -ENOMEM;
 
 	data->client = client;
-	data->type = id->driver_data;
+	if (client->dev.of_node)
+		data->type = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		data->type = id->driver_data;
 	mutex_init(&data->update_lock);
 
 	/* Fill in the chip specific driver values */
@@ -1623,10 +1627,60 @@ static const struct i2c_device_id lm85_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
 
+static const struct of_device_id lm85_of_match[] = {
+	{
+		.compatible = "adi,adm1027",
+		.data = (void *)adm1027
+	},
+	{
+		.compatible = "adi,adt7463",
+		.data = (void *)adt7463
+	},
+	{
+		.compatible = "adi,adt7468",
+		.data = (void *)adt7468
+	},
+	{
+		.compatible = "national,lm85",
+		.data = (void *)lm85
+	},
+	{
+		.compatible = "national,lm85b",
+		.data = (void *)lm85
+	},
+	{
+		.compatible = "national,lm85c",
+		.data = (void *)lm85
+	},
+	{
+		.compatible = "smsc,emc6d100",
+		.data = (void *)emc6d100
+	},
+	{
+		.compatible = "smsc,emc6d101",
+		.data = (void *)emc6d100
+	},
+	{
+		.compatible = "smsc,emc6d102",
+		.data = (void *)emc6d102
+	},
+	{
+		.compatible = "smsc,emc6d103",
+		.data = (void *)emc6d103
+	},
+	{
+		.compatible = "smsc,emc6d103s",
+		.data = (void *)emc6d103s
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm85_of_match);
+
 static struct i2c_driver lm85_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name   = "lm85",
+		.of_match_table = of_match_ptr(lm85_of_match),
 	},
 	.probe		= lm85_probe,
 	.id_table	= lm85_id,

drivers/hwmon/lm87.c

@@ -66,6 +66,7 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
 
 /*
  * Addresses to scan
@@ -74,8 +75,6 @@
 
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
-enum chips { lm87, adm1024 };
-
 /*
  * The LM87 registers
  */
@@ -855,8 +854,26 @@ static int lm87_init_client(struct i2c_client *client)
 {
 	struct lm87_data *data = i2c_get_clientdata(client);
 	int rc;
-
-	if (dev_get_platdata(&client->dev)) {
+	struct device_node *of_node = client->dev.of_node;
+	u8 val = 0;
+	struct regulator *vcc = NULL;
+
+	if (of_node) {
+		if (of_property_read_bool(of_node, "has-temp3"))
+			val |= CHAN_TEMP3;
+		if (of_property_read_bool(of_node, "has-in6"))
+			val |= CHAN_NO_FAN(0);
+		if (of_property_read_bool(of_node, "has-in7"))
+			val |= CHAN_NO_FAN(1);
+		vcc = devm_regulator_get_optional(&client->dev, "vcc");
+		if (!IS_ERR(vcc)) {
+			if (regulator_get_voltage(vcc) == 5000000)
+				val |= CHAN_VCC_5V;
+		}
+		data->channel = val;
+		lm87_write_value(client,
+				LM87_REG_CHANNEL_MODE, data->channel);
+	} else if (dev_get_platdata(&client->dev)) {
 		data->channel = *(u8 *)dev_get_platdata(&client->dev);
 		lm87_write_value(client,
 				 LM87_REG_CHANNEL_MODE, data->channel);
@@ -962,16 +979,24 @@ static int lm87_probe(struct i2c_client *client, const struct i2c_device_id *id)
  */
 
 static const struct i2c_device_id lm87_id[] = {
-	{ "lm87", lm87 },
-	{ "adm1024", adm1024 },
+	{ "lm87", 0 },
+	{ "adm1024", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm87_id);
 
+static const struct of_device_id lm87_of_match[] = {
+	{ .compatible = "ti,lm87" },
+	{ .compatible = "adi,adm1024" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm87_of_match);
+
 static struct i2c_driver lm87_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm87",
+		.of_match_table = lm87_of_match,
 	},
 	.probe		= lm87_probe,
 	.id_table	= lm87_id,

drivers/hwmon/lm90.c

@@ -92,6 +92,7 @@
 #include <linux/hwmon.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/sysfs.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/consumer.h>
@@ -235,6 +236,99 @@ static const struct i2c_device_id lm90_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm90_id);
 
+static const struct of_device_id lm90_of_match[] = {
+	{
+		.compatible = "adi,adm1032",
+		.data = (void *)adm1032
+	},
+	{
+		.compatible = "adi,adt7461",
+		.data = (void *)adt7461
+	},
+	{
+		.compatible = "adi,adt7461a",
+		.data = (void *)adt7461
+	},
+	{
+		.compatible = "gmt,g781",
+		.data = (void *)g781
+	},
+	{
+		.compatible = "national,lm90",
+		.data = (void *)lm90
+	},
+	{
+		.compatible = "national,lm86",
+		.data = (void *)lm86
+	},
+	{
+		.compatible = "national,lm89",
+		.data = (void *)lm86
+	},
+	{
+		.compatible = "national,lm99",
+		.data = (void *)lm99
+	},
+	{
+		.compatible = "dallas,max6646",
+		.data = (void *)max6646
+	},
+	{
+		.compatible = "dallas,max6647",
+		.data = (void *)max6646
+	},
+	{
+		.compatible = "dallas,max6649",
+		.data = (void *)max6646
+	},
+	{
+		.compatible = "dallas,max6657",
+		.data = (void *)max6657
+	},
+	{
+		.compatible = "dallas,max6658",
+		.data = (void *)max6657
+	},
+	{
+		.compatible = "dallas,max6659",
+		.data = (void *)max6659
+	},
+	{
+		.compatible = "dallas,max6680",
+		.data = (void *)max6680
+	},
+	{
+		.compatible = "dallas,max6681",
+		.data = (void *)max6680
+	},
+	{
+		.compatible = "dallas,max6695",
+		.data = (void *)max6696
+	},
+	{
+		.compatible = "dallas,max6696",
+		.data = (void *)max6696
+	},
+	{
+		.compatible = "onnn,nct1008",
+		.data = (void *)adt7461
+	},
+	{
+		.compatible = "winbond,w83l771",
+		.data = (void *)w83l771
+	},
+	{
+		.compatible = "nxp,sa56004",
+		.data = (void *)sa56004
+	},
+	{
+		.compatible = "ti,tmp451",
+		.data = (void *)tmp451
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm90_of_match);
+
 /*
  * chip type specific parameters
  */
@@ -1677,7 +1771,10 @@ static int lm90_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	/* Set the device type */
-	data->kind = id->driver_data;
+	if (client->dev.of_node)
+		data->kind = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		data->kind = id->driver_data;
 	if (data->kind == adm1032) {
 		if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
 			client->flags &= ~I2C_CLIENT_PEC;
@@ -1816,6 +1913,7 @@ static struct i2c_driver lm90_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm90",
+		.of_match_table = of_match_ptr(lm90_of_match),
 	},
 	.probe		= lm90_probe,
 	.alert		= lm90_alert,

drivers/hwmon/lm95245.c

@@ -622,10 +622,18 @@ static const struct i2c_device_id lm95245_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm95245_id);
 
+static const struct of_device_id lm95245_of_match[] = {
+	{ .compatible = "national,lm95235" },
+	{ .compatible = "national,lm95245" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm95245_of_match);
+
 static struct i2c_driver lm95245_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm95245",
+		.of_match_table = of_match_ptr(lm95245_of_match),
 	},
 	.probe		= lm95245_probe,
 	.id_table	= lm95245_id,

drivers/hwmon/max6697.c

@@ -24,6 +24,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/of.h>
 
 #include <linux/platform_data/max6697.h>
@@ -632,7 +633,10 @@ static int max6697_probe(struct i2c_client *client,
 	if (!data)
 		return -ENOMEM;
 
-	data->type = id->driver_data;
+	if (client->dev.of_node)
+		data->type = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		data->type = id->driver_data;
 	data->chip = &max6697_chip_data[data->type];
 	data->client = client;
 	mutex_init(&data->update_lock);
@@ -662,10 +666,56 @@ static const struct i2c_device_id max6697_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, max6697_id);
 
+static const struct of_device_id max6697_of_match[] = {
+	{
+		.compatible = "maxim,max6581",
+		.data = (void *)max6581
+	},
+	{
+		.compatible = "maxim,max6602",
+		.data = (void *)max6602
+	},
+	{
+		.compatible = "maxim,max6622",
+		.data = (void *)max6622
+	},
+	{
+		.compatible = "maxim,max6636",
+		.data = (void *)max6636
+	},
+	{
+		.compatible = "maxim,max6689",
+		.data = (void *)max6689
+	},
+	{
+		.compatible = "maxim,max6693",
+		.data = (void *)max6693
+	},
+	{
+		.compatible = "maxim,max6694",
+		.data = (void *)max6694
+	},
+	{
+		.compatible = "maxim,max6697",
+		.data = (void *)max6697
+	},
+	{
+		.compatible = "maxim,max6698",
+		.data = (void *)max6698
+	},
+	{
+		.compatible = "maxim,max6699",
+		.data = (void *)max6699
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max6697_of_match);
+
 static struct i2c_driver max6697_driver = {
 	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max6697",
+		.of_match_table = of_match_ptr(max6697_of_match),
 	},
 	.probe = max6697_probe,
 	.id_table = max6697_id,

drivers/hwmon/pmbus/adm1275.c

@@ -101,8 +101,8 @@ static const struct coefficients adm1075_coefficients[] = {
 	[0] = { 27169, 0, -1 },		/* voltage */
 	[1] = { 806, 20475, -1 },	/* current, irange25 */
 	[2] = { 404, 20475, -1 },	/* current, irange50 */
-	[3] = { 0, -1, 8549 },		/* power, irange25 */
-	[4] = { 0, -1, 4279 },		/* power, irange50 */
+	[3] = { 8549, 0, -1 },		/* power, irange25 */
+	[4] = { 4279, 0, -1 },		/* power, irange50 */
 };
 
 static const struct coefficients adm1275_coefficients[] = {

drivers/hwmon/pmbus/ucd9000.c

@@ -21,6 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -119,6 +120,35 @@ static const struct i2c_device_id ucd9000_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ucd9000_id);
 
+static const struct of_device_id ucd9000_of_match[] = {
+	{
+		.compatible = "ti,ucd9000",
+		.data = (void *)ucd9000
+	},
+	{
+		.compatible = "ti,ucd90120",
+		.data = (void *)ucd90120
+	},
+	{
+		.compatible = "ti,ucd90124",
+		.data = (void *)ucd90124
+	},
+	{
+		.compatible = "ti,ucd90160",
+		.data = (void *)ucd90160
+	},
+	{
+		.compatible = "ti,ucd9090",
+		.data = (void *)ucd9090
+	},
+	{
+		.compatible = "ti,ucd90910",
+		.data = (void *)ucd90910
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ucd9000_of_match);
+
 static int ucd9000_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -126,6 +156,7 @@ static int ucd9000_probe(struct i2c_client *client,
 	struct ucd9000_data *data;
 	struct pmbus_driver_info *info;
 	const struct i2c_device_id *mid;
+	enum chips chip;
 	int i, ret;
 
 	if (!i2c_check_functionality(client->adapter,
@@ -151,7 +182,12 @@ static int ucd9000_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data)
+	if (client->dev.of_node)
+		chip = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		chip = id->driver_data;
+
+	if (chip != ucd9000 && chip != mid->driver_data)
 		dev_notice(&client->dev,
 			   "Device mismatch: Configured %s, detected %s\n",
 			   id->name, mid->name);
@@ -234,6 +270,7 @@ static int ucd9000_probe(struct i2c_client *client,
 static struct i2c_driver ucd9000_driver = {
 	.driver = {
 		.name = "ucd9000",
+		.of_match_table = of_match_ptr(ucd9000_of_match),
 	},
 	.probe = ucd9000_probe,
 	.remove = pmbus_do_remove,

drivers/hwmon/pmbus/ucd9200.c

@@ -20,6 +20,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -46,12 +47,50 @@ static const struct i2c_device_id ucd9200_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ucd9200_id);
 
+static const struct of_device_id ucd9200_of_match[] = {
+	{
+		.compatible = "ti,cd9200",
+		.data = (void *)ucd9200
+	},
+	{
+		.compatible = "ti,cd9220",
+		.data = (void *)ucd9220
+	},
+	{
+		.compatible = "ti,cd9222",
+		.data = (void *)ucd9222
+	},
+	{
+		.compatible = "ti,cd9224",
+		.data = (void *)ucd9224
+	},
+	{
+		.compatible = "ti,cd9240",
+		.data = (void *)ucd9240
+	},
+	{
+		.compatible = "ti,cd9244",
+		.data = (void *)ucd9244
+	},
+	{
+		.compatible = "ti,cd9246",
+		.data = (void *)ucd9246
+	},
+	{
+		.compatible = "ti,cd9248",
+		.data = (void *)ucd9248
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ucd9200_of_match);
+
 static int ucd9200_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
 	struct pmbus_driver_info *info;
 	const struct i2c_device_id *mid;
+	enum chips chip;
 	int i, j, ret;
 
 	if (!i2c_check_functionality(client->adapter,
@@ -76,7 +115,13 @@ static int ucd9200_probe(struct i2c_client *client,
 		dev_err(&client->dev, "Unsupported device\n");
 		return -ENODEV;
 	}
-	if (id->driver_data != ucd9200 && id->driver_data != mid->driver_data)
+
+	if (client->dev.of_node)
+		chip = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		chip = id->driver_data;
+
+	if (chip != ucd9200 && chip != mid->driver_data)
 		dev_notice(&client->dev,
 			   "Device mismatch: Configured %s, detected %s\n",
 			   id->name, mid->name);
@@ -167,6 +212,7 @@ static int ucd9200_probe(struct i2c_client *client,
 static struct i2c_driver ucd9200_driver = {
 	.driver = {
 		.name = "ucd9200",
+		.of_match_table = of_match_ptr(ucd9200_of_match),
 	},
 	.probe = ucd9200_probe,
 	.remove = pmbus_do_remove,

drivers/hwmon/stts751.c

@@ -85,6 +85,12 @@ static const struct i2c_device_id stts751_id[] = {
 	{ }
 };
 
+static const struct of_device_id stts751_of_match[] = {
+	{ .compatible = "stts751" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stts751_of_match);
+
 struct stts751_priv {
 	struct device *dev;
 	struct i2c_client *client;
@@ -819,6 +825,7 @@ static struct i2c_driver stts751_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= DEVNAME,
+		.of_match_table = of_match_ptr(stts751_of_match),
 	},
 	.probe		= stts751_probe,
 	.id_table	= stts751_id,

drivers/hwmon/tmp102.c

@@ -323,8 +323,15 @@ static const struct i2c_device_id tmp102_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tmp102_id);
 
+static const struct of_device_id tmp102_of_match[] = {
+	{ .compatible = "ti,tmp102" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tmp102_of_match);
+
 static struct i2c_driver tmp102_driver = {
 	.driver.name	= DRIVER_NAME,
+	.driver.of_match_table = of_match_ptr(tmp102_of_match),
 	.driver.pm	= &tmp102_dev_pm_ops,
 	.probe		= tmp102_probe,
 	.id_table	= tmp102_id,

drivers/hwmon/tmp103.c

@@ -150,8 +150,7 @@ static int tmp103_probe(struct i2c_client *client,
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
-#ifdef CONFIG_PM
-static int tmp103_suspend(struct device *dev)
+static int __maybe_unused tmp103_suspend(struct device *dev)
 {
 	struct regmap *regmap = dev_get_drvdata(dev);
 
@@ -159,7 +158,7 @@ static int tmp103_suspend(struct device *dev)
 				  TMP103_CONF_SD_MASK, 0);
 }
 
-static int tmp103_resume(struct device *dev)
+static int __maybe_unused tmp103_resume(struct device *dev)
 {
 	struct regmap *regmap = dev_get_drvdata(dev);
 
@@ -167,15 +166,7 @@ static int tmp103_resume(struct device *dev)
 				  TMP103_CONF_SD_MASK, TMP103_CONF_SD);
 }
 
-static const struct dev_pm_ops tmp103_dev_pm_ops = {
-	.suspend	= tmp103_suspend,
-	.resume		= tmp103_resume,
-};
-
-#define TMP103_DEV_PM_OPS (&tmp103_dev_pm_ops)
-#else
-#define	TMP103_DEV_PM_OPS NULL
-#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(tmp103_dev_pm_ops, tmp103_suspend, tmp103_resume);
 
 static const struct i2c_device_id tmp103_id[] = {
 	{ "tmp103", 0 },
@@ -183,10 +174,17 @@ static const struct i2c_device_id tmp103_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tmp103_id);
 
+static const struct of_device_id tmp103_of_match[] = {
+	{ .compatible = "ti,tmp103" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tmp103_of_match);
+
 static struct i2c_driver tmp103_driver = {
 	.driver = {
 		.name	= "tmp103",
-		.pm	= TMP103_DEV_PM_OPS,
+		.of_match_table = of_match_ptr(tmp103_of_match),
+		.pm	= &tmp103_dev_pm_ops,
 	},
 	.probe		= tmp103_probe,
 	.id_table	= tmp103_id,

drivers/hwmon/tmp421.c

@@ -29,6 +29,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/sysfs.h>
 
 /* Addresses to scan */
@@ -69,6 +70,31 @@ static const struct i2c_device_id tmp421_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tmp421_id);
 
+static const struct of_device_id tmp421_of_match[] = {
+	{
+		.compatible = "ti,tmp421",
+		.data = (void *)2
+	},
+	{
+		.compatible = "ti,tmp422",
+		.data = (void *)3
+	},
+	{
+		.compatible = "ti,tmp423",
+		.data = (void *)4
+	},
+	{
+		.compatible = "ti,tmp441",
+		.data = (void *)2
+	},
+	{
+		.compatible = "ti,tmp422",
+		.data = (void *)3
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tmp421_of_match);
+
 struct tmp421_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
@@ -78,7 +104,7 @@ struct tmp421_data {
 	struct hwmon_chip_info chip;
 	char valid;
 	unsigned long last_updated;
-	int channels;
+	unsigned long channels;
 	u8 config;
 	s16 temp[4];
 };
@@ -272,7 +298,11 @@ static int tmp421_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	mutex_init(&data->update_lock);
-	data->channels = id->driver_data;
+	if (client->dev.of_node)
+		data->channels = (unsigned long)
+			of_device_get_match_data(&client->dev);
+	else
+		data->channels = id->driver_data;
 	data->client = client;
 
 	err = tmp421_init_client(client);
@@ -301,6 +331,7 @@ static struct i2c_driver tmp421_driver = {
 	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "tmp421",
+		.of_match_table = of_match_ptr(tmp421_of_match),
 	},
 	.probe = tmp421_probe,
 	.id_table = tmp421_id,

drivers/hwmon/twl4030-madc-hwmon.c

-/*
- *
- * TWL4030 MADC Hwmon driver-This driver monitors the real time
- * conversion of analog signals like battery temperature,
- * battery type, battery level etc. User can ask for the conversion on a
- * particular channel using the sysfs nodes.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * J Keerthy <j-keerthy@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c/twl.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl4030-madc.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/stddef.h>
-#include <linux/sysfs.h>
-#include <linux/err.h>
-#include <linux/types.h>
-
-/*
- * sysfs hook function
- */
-static ssize_t madc_read(struct device *dev,
-			 struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct twl4030_madc_request req = {
-		.channels = 1 << attr->index,
-		.method = TWL4030_MADC_SW2,
-		.type = TWL4030_MADC_WAIT,
-	};
-	long val;
-
-	val = twl4030_madc_conversion(&req);
-	if (val < 0)
-		return val;
-
-	return sprintf(buf, "%d\n", req.rbuf[attr->index]);
-}
-
-/* sysfs nodes to read individual channels from user side */
-static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, madc_read, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, madc_read, NULL, 1);
-static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, madc_read, NULL, 2);
-static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, madc_read, NULL, 3);
-static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, madc_read, NULL, 4);
-static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, madc_read, NULL, 5);
-static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, madc_read, NULL, 6);
-static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, madc_read, NULL, 7);
-static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, madc_read, NULL, 8);
-static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, madc_read, NULL, 9);
-static SENSOR_DEVICE_ATTR(curr10_input, S_IRUGO, madc_read, NULL, 10);
-static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, madc_read, NULL, 11);
-static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, madc_read, NULL, 12);
-static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, madc_read, NULL, 15);
-
-static struct attribute *twl4030_madc_attrs[] = {
-	&sensor_dev_attr_in0_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_in2_input.dev_attr.attr,
-	&sensor_dev_attr_in3_input.dev_attr.attr,
-	&sensor_dev_attr_in4_input.dev_attr.attr,
-	&sensor_dev_attr_in5_input.dev_attr.attr,
-	&sensor_dev_attr_in6_input.dev_attr.attr,
-	&sensor_dev_attr_in7_input.dev_attr.attr,
-	&sensor_dev_attr_in8_input.dev_attr.attr,
-	&sensor_dev_attr_in9_input.dev_attr.attr,
-	&sensor_dev_attr_curr10_input.dev_attr.attr,
-	&sensor_dev_attr_in11_input.dev_attr.attr,
-	&sensor_dev_attr_in12_input.dev_attr.attr,
-	&sensor_dev_attr_in15_input.dev_attr.attr,
-	NULL
-};
-ATTRIBUTE_GROUPS(twl4030_madc);
-
-static int twl4030_madc_hwmon_probe(struct platform_device *pdev)
-{
-	struct device *hwmon;
-
-	hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
-						       "twl4030_madc", NULL,
-						       twl4030_madc_groups);
-	return PTR_ERR_OR_ZERO(hwmon);
-}
-
-static struct platform_driver twl4030_madc_hwmon_driver = {
-	.probe = twl4030_madc_hwmon_probe,
-	.driver = {
-		   .name = "twl4030_madc_hwmon",
-		   },
-};
-
-module_platform_driver(twl4030_madc_hwmon_driver);
-
-MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("J Keerthy");
-MODULE_ALIAS("platform:twl4030_madc_hwmon");

drivers/hwmon/w83627ehf.c

@@ -135,11 +135,16 @@ superio_select(int ioreg, int ld)
 	outb(ld, ioreg + 1);
 }
 
-static inline void
+static inline int
 superio_enter(int ioreg)
 {
+	if (!request_muxed_region(ioreg, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x87, ioreg);
 	outb(0x87, ioreg);
+
+	return 0;
 }
 
 static inline void
@@ -148,6 +153,7 @@ superio_exit(int ioreg)
 	outb(0xaa, ioreg);
 	outb(0x02, ioreg);
 	outb(0x02, ioreg + 1);
+	release_region(ioreg, 2);
 }
 
 /*
@@ -1970,8 +1976,6 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
 		return;
 	}
 
-	superio_enter(sio_data->sioreg);
-
 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
 	if (sio_data->kind == nct6775) {
 		/* On NCT6775, fan4 shares pins with the fdc interface */
@@ -2013,8 +2017,6 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
 		fan4min = fan4pin;
 	}
 
-	superio_exit(sio_data->sioreg);
-
 	data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
 	data->has_fan |= (fan3pin << 2);
 	data->has_fan_min |= (fan3pin << 2);
@@ -2352,7 +2354,11 @@ static int w83627ehf_probe(struct platform_device *pdev)
 	w83627ehf_init_device(data, sio_data->kind);
 
 	data->vrm = vid_which_vrm();
-	superio_enter(sio_data->sioreg);
+
+	err = superio_enter(sio_data->sioreg);
+	if (err)
+		goto exit_release;
+
 	/* Read VID value */
 	if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b ||
 	    sio_data->kind == nct6775 || sio_data->kind == nct6776) {
@@ -2364,8 +2370,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
 		superio_select(sio_data->sioreg, W83667HG_LD_VID);
 		data->vid = superio_inb(sio_data->sioreg, 0xe3);
 		err = device_create_file(dev, &dev_attr_cpu0_vid);
-		if (err)
+		if (err) {
+			superio_exit(sio_data->sioreg);
 			goto exit_release;
+		}
 	} else if (sio_data->kind != w83627uhg) {
 		superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
 		if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
@@ -2401,8 +2409,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
 				data->vid &= 0x3f;
 
 			err = device_create_file(dev, &dev_attr_cpu0_vid);
-			if (err)
+			if (err) {
+				superio_exit(sio_data->sioreg);
 				goto exit_release;
+			}
 		} else {
 			dev_info(dev,
 				 "VID pins in output mode, CPU VID not available\n");
@@ -2424,10 +2434,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
 		pr_info("Enabled fan debounce for chip %s\n", data->name);
 	}
 
-	superio_exit(sio_data->sioreg);
-
 	w83627ehf_check_fan_inputs(sio_data, data);
 
+	superio_exit(sio_data->sioreg);
+
 	/* Read fan clock dividers immediately */
 	w83627ehf_update_fan_div_common(dev, data);
 
@@ -2712,8 +2722,11 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 
 	u16 val;
 	const char *sio_name;
+	int err;
 
-	superio_enter(sioaddr);
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
 
 	if (force_id)
 		val = force_id;

include/linux/hwmon.h

@@ -337,7 +337,7 @@ struct hwmon_ops {
 	int (*read)(struct device *dev, enum hwmon_sensor_types type,
 		    u32 attr, int channel, long *val);
 	int (*read_string)(struct device *dev, enum hwmon_sensor_types type,
-		    u32 attr, int channel, char **str);
+		    u32 attr, int channel, const char **str);
 	int (*write)(struct device *dev, enum hwmon_sensor_types type,
 		     u32 attr, int channel, long val);
 };