Merge tag 'phy-for-4.10' of...

Merge tag 'phy-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.10

Merge contains:
 *) Add new usb2 phy driver for Meson8b and GXBB
 *) Remove phy drivers added for miphy365 and STiH415/6 (as support for
    these SoCs are removed from the kernel)
 *) Add a sysfs entry to facilitate usb role swap in rcar SoC
 *) Add support for otg port in rk3399
 *) misc fixes in various phy drivers and cleanups
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2

+What:		/sys/devices/platform/<phy-name>/role
+Date:		October 2016
+KernelVersion:	4.10
+Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Description:
+		This file can be read and write.
+		The file can show/change the phy mode for role swap of usb.
+
+		Write the following strings to change the mode:
+		 "host" - switching mode from peripheral to host.
+		 "peripheral" - switching mode from host to peripheral.
+
+		Read the file, then it shows the following strings:
+		 "host" - The mode is host now.
+		 "peripheral" - The mode is peripheral now.

Documentation/devicetree/bindings/phy/meson-usb2-phy.txt → Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt

-* Amlogic USB2 PHY
+* Amlogic Meson8b and GXBB USB2 PHY
 
 Required properties:
 - compatible:	Depending on the platform this should be one of:
@@ -16,10 +16,10 @@ Optional properties:
 
 Example:
 
-usb0_phy: usb_phy@0 {
+usb0_phy: usb-phy@c0000000 {
 	compatible = "amlogic,meson-gxbb-usb2-phy";
 	#phy-cells = <0>;
-	reg = <0x0 0x0 0x0 0x20>;
+	reg = <0x0 0xc0000000 0x0 0x20>;
 	resets = <&reset RESET_USB_OTG>;
 	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
 	clock-names = "usb_general", "usb";

drivers/phy/Kconfig

@@ -129,16 +129,6 @@ config PHY_MIPHY28LP
 	  Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 	  that is part of STMicroelectronics STiH407 SoC.
 
-config PHY_MIPHY365X
-	tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
-	depends on ARCH_STI
-	depends on HAS_IOMEM
-	depends on OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the miphy transceiver (for SATA/PCIE)
-	  that is part of STMicroelectronics STiH41x SoC series.
-
 config PHY_RCAR_GEN2
 	tristate "Renesas R-Car generation 2 USB PHY driver"
 	depends on ARCH_RENESAS
@@ -373,7 +363,9 @@ config PHY_ROCKCHIP_INNO_USB2
 	tristate "Rockchip INNO USB2PHY Driver"
 	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
 	depends on COMMON_CLK
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_COMMON
 	help
 	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
 
@@ -438,14 +430,6 @@ config PHY_STIH407_USB
 	  Enable this support to enable the picoPHY device used by USB2
 	  and USB3 controllers on STMicroelectronics STiH407 SoC families.
 
-config PHY_STIH41X_USB
-	tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
-	depends on ARCH_STI
-	select GENERIC_PHY
-	help
-	  Enable this to support the USB transceiver that is part of
-	  STMicroelectronics STiH41x SoC series.
-
 config PHY_QCOM_UFS
 	tristate "Qualcomm UFS PHY driver"
 	depends on OF && ARCH_QCOM
@@ -489,4 +473,17 @@ config PHY_NS2_PCIE
 	help
 	  Enable this to support the Broadcom Northstar2 PCIe PHY.
 	  If unsure, say N.
+
+config PHY_MESON8B_USB2
+	tristate "Meson8b and GXBB USB2 PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	depends on USB_SUPPORT
+	select USB_COMMON
+	select GENERIC_PHY
+	help
+	  Enable this to support the Meson USB2 PHYs found in Meson8b
+	  and GXBB SoCs.
+	  If unsure, say N.
+
 endmenu

drivers/phy/Makefile

@@ -18,7 +18,6 @@ obj-$(CONFIG_PHY_PXA_28NM_USB2)		+= phy-pxa-28nm-usb2.o
 obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
 obj-$(CONFIG_PHY_MIPHY28LP) 		+= phy-miphy28lp.o
-obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o
 obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
 obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o
 obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
@@ -50,7 +49,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
-obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
@@ -60,3 +58,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o
+obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o

drivers/phy/phy-berlin-sata.c

@@ -85,7 +85,6 @@ static int phy_berlin_sata_power_on(struct phy *phy)
 	struct phy_berlin_desc *desc = phy_get_drvdata(phy);
 	struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
 	void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
-	int ret = 0;
 	u32 regval;
 
 	clk_prepare_enable(priv->clk);
@@ -130,7 +129,7 @@ static int phy_berlin_sata_power_on(struct phy *phy)
 
 	clk_disable_unprepare(priv->clk);
 
-	return ret;
+	return 0;
 }
 
 static int phy_berlin_sata_power_off(struct phy *phy)

drivers/phy/phy-brcm-sata.c

@@ -140,7 +140,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
 	default:
 		dev_err(priv->dev, "invalid phy version\n");
 		break;
-	};
+	}
 
 	return priv->phy_base + (port->portnum * size);
 }
@@ -157,7 +157,7 @@ static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
 	default:
 		dev_err(priv->dev, "invalid phy version\n");
 		break;
-	};
+	}
 
 	return priv->ctrl_base + (port->portnum * size);
 }
@@ -365,7 +365,7 @@ static int brcm_sata_phy_init(struct phy *phy)
 		break;
 	default:
 		rc = -ENODEV;
-	};
+	}
 
 	return rc;
 }

drivers/phy/phy-da8xx-usb.c

@@ -23,6 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#define PHY_INIT_BITS	(CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN)
+
 struct da8xx_usb_phy {
 	struct phy_provider	*phy_provider;
 	struct phy		*usb11_phy;
@@ -208,6 +210,9 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 			dev_warn(dev, "Failed to create usb20 phy lookup\n");
 	}
 
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2),
+			  PHY_INIT_BITS, PHY_INIT_BITS);
+
 	return 0;
 }
 

drivers/phy/phy-exynos-mipi-video.c

@@ -229,19 +229,6 @@ struct exynos_mipi_video_phy {
 	spinlock_t slock;
 };
 
-static inline int __is_running(const struct exynos_mipi_phy_desc *data,
-			struct exynos_mipi_video_phy *state)
-{
-	u32 val;
-	int ret;
-
-	ret = regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
-	if (ret)
-		return 0;
-
-	return val & data->resetn_val;
-}
-
 static int __set_phy_state(const struct exynos_mipi_phy_desc *data,
 			   struct exynos_mipi_video_phy *state, unsigned int on)
 {
@@ -251,7 +238,7 @@ static int __set_phy_state(const struct exynos_mipi_phy_desc *data,
 
 	/* disable in PMU sysreg */
 	if (!on && data->coupled_phy_id >= 0 &&
-	    !__is_running(state->phys[data->coupled_phy_id].data, state)) {
+	    state->phys[data->coupled_phy_id].phy->power_count == 0) {
 		regmap_read(state->regmaps[data->enable_map], data->enable_reg,
 			    &val);
 		val &= ~data->enable_val;

drivers/phy/phy-exynos4210-usb2.c

@@ -141,7 +141,7 @@ static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on)
 		break;
 	default:
 		return;
-	};
+	}
 
 	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
 }
@@ -179,7 +179,7 @@ static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 		rstbits =	EXYNOS_4210_URSTCON_PHY1_P1P2 |
 				EXYNOS_4210_URSTCON_HOST_LINK_P2;
 		break;
-	};
+	}
 
 	if (on) {
 		clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK);

drivers/phy/phy-exynos4x12-usb2.c

@@ -187,7 +187,7 @@ static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
 		break;
 	default:
 		return;
-	};
+	}
 
 	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
 }
@@ -237,7 +237,7 @@ static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 		rstbits =	EXYNOS_4x12_URSTCON_HSIC1 |
 				EXYNOS_4x12_URSTCON_HOST_LINK_P1;
 		break;
-	};
+	}
 
 	if (on) {
 		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);

drivers/phy/phy-exynos5250-usb2.c

@@ -192,7 +192,7 @@ static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on)
 		break;
 	default:
 		return;
-	};
+	}
 
 	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
 }

drivers/phy/phy-meson8b-usb2.c

+/*
+ * Meson8b and GXBB USB2 PHY driver
+ *
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/of.h>
+
+#define REG_CONFIG					0x00
+	#define REG_CONFIG_CLK_EN			BIT(0)
+	#define REG_CONFIG_CLK_SEL_MASK			GENMASK(3, 1)
+	#define REG_CONFIG_CLK_DIV_MASK			GENMASK(10, 4)
+	#define REG_CONFIG_CLK_32k_ALTSEL		BIT(15)
+	#define REG_CONFIG_TEST_TRIG			BIT(31)
+
+#define REG_CTRL					0x04
+	#define REG_CTRL_SOFT_PRST			BIT(0)
+	#define REG_CTRL_SOFT_HRESET			BIT(1)
+	#define REG_CTRL_SS_SCALEDOWN_MODE_MASK		GENMASK(3, 2)
+	#define REG_CTRL_CLK_DET_RST			BIT(4)
+	#define REG_CTRL_INTR_SEL			BIT(5)
+	#define REG_CTRL_CLK_DETECTED			BIT(8)
+	#define REG_CTRL_SOF_SENT_RCVD_TGL		BIT(9)
+	#define REG_CTRL_SOF_TOGGLE_OUT			BIT(10)
+	#define REG_CTRL_POWER_ON_RESET			BIT(15)
+	#define REG_CTRL_SLEEPM				BIT(16)
+	#define REG_CTRL_TX_BITSTUFF_ENN_H		BIT(17)
+	#define REG_CTRL_TX_BITSTUFF_ENN		BIT(18)
+	#define REG_CTRL_COMMON_ON			BIT(19)
+	#define REG_CTRL_REF_CLK_SEL_MASK		GENMASK(21, 20)
+	#define REG_CTRL_REF_CLK_SEL_SHIFT		20
+	#define REG_CTRL_FSEL_MASK			GENMASK(24, 22)
+	#define REG_CTRL_FSEL_SHIFT			22
+	#define REG_CTRL_PORT_RESET			BIT(25)
+	#define REG_CTRL_THREAD_ID_MASK			GENMASK(31, 26)
+
+#define REG_ENDP_INTR					0x08
+
+/* bits [31:26], [24:21] and [15:3] seem to be read-only */
+#define REG_ADP_BC					0x0c
+	#define REG_ADP_BC_VBUS_VLD_EXT_SEL		BIT(0)
+	#define REG_ADP_BC_VBUS_VLD_EXT			BIT(1)
+	#define REG_ADP_BC_OTG_DISABLE			BIT(2)
+	#define REG_ADP_BC_ID_PULLUP			BIT(3)
+	#define REG_ADP_BC_DRV_VBUS			BIT(4)
+	#define REG_ADP_BC_ADP_PRB_EN			BIT(5)
+	#define REG_ADP_BC_ADP_DISCHARGE		BIT(6)
+	#define REG_ADP_BC_ADP_CHARGE			BIT(7)
+	#define REG_ADP_BC_SESS_END			BIT(8)
+	#define REG_ADP_BC_DEVICE_SESS_VLD		BIT(9)
+	#define REG_ADP_BC_B_VALID			BIT(10)
+	#define REG_ADP_BC_A_VALID			BIT(11)
+	#define REG_ADP_BC_ID_DIG			BIT(12)
+	#define REG_ADP_BC_VBUS_VALID			BIT(13)
+	#define REG_ADP_BC_ADP_PROBE			BIT(14)
+	#define REG_ADP_BC_ADP_SENSE			BIT(15)
+	#define REG_ADP_BC_ACA_ENABLE			BIT(16)
+	#define REG_ADP_BC_DCD_ENABLE			BIT(17)
+	#define REG_ADP_BC_VDAT_DET_EN_B		BIT(18)
+	#define REG_ADP_BC_VDAT_SRC_EN_B		BIT(19)
+	#define REG_ADP_BC_CHARGE_SEL			BIT(20)
+	#define REG_ADP_BC_CHARGE_DETECT		BIT(21)
+	#define REG_ADP_BC_ACA_PIN_RANGE_C		BIT(22)
+	#define REG_ADP_BC_ACA_PIN_RANGE_B		BIT(23)
+	#define REG_ADP_BC_ACA_PIN_RANGE_A		BIT(24)
+	#define REG_ADP_BC_ACA_PIN_GND			BIT(25)
+	#define REG_ADP_BC_ACA_PIN_FLOAT		BIT(26)
+
+#define REG_DBG_UART					0x14
+
+#define REG_TEST					0x18
+	#define REG_TEST_DATA_IN_MASK			GENMASK(3, 0)
+	#define REG_TEST_EN_MASK			GENMASK(7, 4)
+	#define REG_TEST_ADDR_MASK			GENMASK(11, 8)
+	#define REG_TEST_DATA_OUT_SEL			BIT(12)
+	#define REG_TEST_CLK				BIT(13)
+	#define REG_TEST_VA_TEST_EN_B_MASK		GENMASK(15, 14)
+	#define REG_TEST_DATA_OUT_MASK			GENMASK(19, 16)
+	#define REG_TEST_DISABLE_ID_PULLUP		BIT(20)
+
+#define REG_TUNE					0x1c
+	#define REG_TUNE_TX_RES_TUNE_MASK		GENMASK(1, 0)
+	#define REG_TUNE_TX_HSXV_TUNE_MASK		GENMASK(3, 2)
+	#define REG_TUNE_TX_VREF_TUNE_MASK		GENMASK(7, 4)
+	#define REG_TUNE_TX_RISE_TUNE_MASK		GENMASK(9, 8)
+	#define REG_TUNE_TX_PREEMP_PULSE_TUNE		BIT(10)
+	#define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK	GENMASK(12, 11)
+	#define REG_TUNE_TX_FSLS_TUNE_MASK		GENMASK(16, 13)
+	#define REG_TUNE_SQRX_TUNE_MASK			GENMASK(19, 17)
+	#define REG_TUNE_OTG_TUNE			GENMASK(22, 20)
+	#define REG_TUNE_COMP_DIS_TUNE			GENMASK(25, 23)
+	#define REG_TUNE_HOST_DM_PULLDOWN		BIT(26)
+	#define REG_TUNE_HOST_DP_PULLDOWN		BIT(27)
+
+#define RESET_COMPLETE_TIME				500
+#define ACA_ENABLE_COMPLETE_TIME			50
+
+struct phy_meson8b_usb2_priv {
+	void __iomem		*regs;
+	enum usb_dr_mode	dr_mode;
+	struct clk		*clk_usb_general;
+	struct clk		*clk_usb;
+	struct reset_control	*reset;
+};
+
+static u32 phy_meson8b_usb2_read(struct phy_meson8b_usb2_priv *phy_priv,
+				 u32 reg)
+{
+	return readl(phy_priv->regs + reg);
+}
+
+static void phy_meson8b_usb2_mask_bits(struct phy_meson8b_usb2_priv *phy_priv,
+				       u32 reg, u32 mask, u32 value)
+{
+	u32 data;
+
+	data = phy_meson8b_usb2_read(phy_priv, reg);
+	data &= ~mask;
+	data |= (value & mask);
+
+	writel(data, phy_priv->regs + reg);
+}
+
+static int phy_meson8b_usb2_power_on(struct phy *phy)
+{
+	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	if (!IS_ERR_OR_NULL(priv->reset)) {
+		ret = reset_control_reset(priv->reset);
+		if (ret) {
+			dev_err(&phy->dev, "Failed to trigger USB reset\n");
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(priv->clk_usb_general);
+	if (ret) {
+		dev_err(&phy->dev, "Failed to enable USB general clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(priv->clk_usb);
+	if (ret) {
+		dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
+		clk_disable_unprepare(priv->clk_usb_general);
+		return ret;
+	}
+
+	phy_meson8b_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
+				   REG_CONFIG_CLK_32k_ALTSEL);
+
+	phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
+				   0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
+
+	phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
+				   0x5 << REG_CTRL_FSEL_SHIFT);
+
+	/* reset the PHY */
+	phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
+				   REG_CTRL_POWER_ON_RESET);
+	udelay(RESET_COMPLETE_TIME);
+	phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
+	udelay(RESET_COMPLETE_TIME);
+
+	phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
+				   REG_CTRL_SOF_TOGGLE_OUT);
+
+	if (priv->dr_mode == USB_DR_MODE_HOST) {
+		phy_meson8b_usb2_mask_bits(priv, REG_ADP_BC,
+					   REG_ADP_BC_ACA_ENABLE,
+					   REG_ADP_BC_ACA_ENABLE);
+
+		udelay(ACA_ENABLE_COMPLETE_TIME);
+
+		if (phy_meson8b_usb2_read(priv, REG_ADP_BC) &
+			REG_ADP_BC_ACA_PIN_FLOAT) {
+			dev_warn(&phy->dev, "USB ID detect failed!\n");
+			clk_disable_unprepare(priv->clk_usb);
+			clk_disable_unprepare(priv->clk_usb_general);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int phy_meson8b_usb2_power_off(struct phy *phy)
+{
+	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(priv->clk_usb);
+	clk_disable_unprepare(priv->clk_usb_general);
+
+	return 0;
+}
+
+static const struct phy_ops phy_meson8b_usb2_ops = {
+	.power_on	= phy_meson8b_usb2_power_on,
+	.power_off	= phy_meson8b_usb2_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson8b_usb2_probe(struct platform_device *pdev)
+{
+	struct phy_meson8b_usb2_priv *priv;
+	struct resource *res;
+	struct phy *phy;
+	struct phy_provider *phy_provider;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
+	if (IS_ERR(priv->clk_usb_general))
+		return PTR_ERR(priv->clk_usb_general);
+
+	priv->clk_usb = devm_clk_get(&pdev->dev, "usb");
+	if (IS_ERR(priv->clk_usb))
+		return PTR_ERR(priv->clk_usb);
+
+	priv->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	if (PTR_ERR(priv->reset) == -EPROBE_DEFER)
+		return PTR_ERR(priv->reset);
+
+	priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
+	if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
+		dev_err(&pdev->dev,
+			"missing dual role configuration of the controller\n");
+		return -EINVAL;
+	}
+
+	phy = devm_phy_create(&pdev->dev, NULL, &phy_meson8b_usb2_ops);
+	if (IS_ERR(phy)) {
+		dev_err(&pdev->dev, "failed to create PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider =
+		devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+	{ .compatible = "amlogic,meson8b-usb2-phy", },
+	{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_meson8b_usb2_of_match);
+
+static struct platform_driver phy_meson8b_usb2_driver = {
+	.probe	= phy_meson8b_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-usb2",
+		.of_match_table	= phy_meson8b_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson8b_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_LICENSE("GPL");

drivers/phy/phy-miphy365x.c

-/*
- * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
- *
- * STMicroelectronics PHY driver MiPHY365 (for SoC STiH416).
- *
- * Authors: Alexandre Torgue <alexandre.torgue@st.com>
- *          Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/clk.h>
-#include <linux/phy/phy.h>
-#include <linux/delay.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-
-#include <dt-bindings/phy/phy.h>
-
-#define HFC_TIMEOUT		100
-
-#define SYSCFG_SELECT_SATA_MASK	BIT(1)
-#define SYSCFG_SELECT_SATA_POS	1
-
-/* MiPHY365x register definitions */
-#define RESET_REG		0x00
-#define RST_PLL			BIT(1)
-#define RST_PLL_CAL		BIT(2)
-#define RST_RX			BIT(4)
-#define RST_MACRO		BIT(7)
-
-#define STATUS_REG		0x01
-#define IDLL_RDY		BIT(0)
-#define PLL_RDY			BIT(1)
-#define DES_BIT_LOCK		BIT(2)
-#define DES_SYMBOL_LOCK		BIT(3)
-
-#define CTRL_REG		0x02
-#define TERM_EN			BIT(0)
-#define PCI_EN			BIT(2)
-#define DES_BIT_LOCK_EN		BIT(3)
-#define TX_POL			BIT(5)
-
-#define INT_CTRL_REG		0x03
-
-#define BOUNDARY1_REG		0x10
-#define SPDSEL_SEL		BIT(0)
-
-#define BOUNDARY3_REG		0x12
-#define TX_SPDSEL_GEN1_VAL	0
-#define TX_SPDSEL_GEN2_VAL	0x01
-#define TX_SPDSEL_GEN3_VAL	0x02
-#define RX_SPDSEL_GEN1_VAL	0
-#define RX_SPDSEL_GEN2_VAL	(0x01 << 3)
-#define RX_SPDSEL_GEN3_VAL	(0x02 << 3)
-
-#define PCIE_REG		0x16
-
-#define BUF_SEL_REG		0x20
-#define CONF_GEN_SEL_GEN3	0x02
-#define CONF_GEN_SEL_GEN2	0x01
-#define PD_VDDTFILTER		BIT(4)
-
-#define TXBUF1_REG		0x21
-#define SWING_VAL		0x04
-#define SWING_VAL_GEN1		0x03
-#define PREEMPH_VAL		(0x3 << 5)
-
-#define TXBUF2_REG		0x22
-#define TXSLEW_VAL		0x2
-#define TXSLEW_VAL_GEN1		0x4
-
-#define RXBUF_OFFSET_CTRL_REG	0x23
-
-#define RXBUF_REG		0x25
-#define SDTHRES_VAL		0x01
-#define EQ_ON3			(0x03 << 4)
-#define EQ_ON1			(0x01 << 4)
-
-#define COMP_CTRL1_REG		0x40
-#define START_COMSR		BIT(0)
-#define START_COMZC		BIT(1)
-#define COMSR_DONE		BIT(2)
-#define COMZC_DONE		BIT(3)
-#define COMP_AUTO_LOAD		BIT(4)
-
-#define COMP_CTRL2_REG		0x41
-#define COMP_2MHZ_RAT_GEN1	0x1e
-#define COMP_2MHZ_RAT		0xf
-
-#define COMP_CTRL3_REG		0x42
-#define COMSR_COMP_REF		0x33
-
-#define COMP_IDLL_REG		0x47
-#define COMZC_IDLL		0x2a
-
-#define PLL_CTRL1_REG		0x50
-#define PLL_START_CAL		BIT(0)
-#define BUF_EN			BIT(2)
-#define SYNCHRO_TX		BIT(3)
-#define SSC_EN			BIT(6)
-#define CONFIG_PLL		BIT(7)
-
-#define PLL_CTRL2_REG		0x51
-#define BYPASS_PLL_CAL		BIT(1)
-
-#define PLL_RAT_REG		0x52
-
-#define PLL_SSC_STEP_MSB_REG	0x56
-#define PLL_SSC_STEP_MSB_VAL	0x03
-
-#define PLL_SSC_STEP_LSB_REG	0x57
-#define PLL_SSC_STEP_LSB_VAL	0x63
-
-#define PLL_SSC_PER_MSB_REG	0x58
-#define PLL_SSC_PER_MSB_VAL	0
-
-#define PLL_SSC_PER_LSB_REG	0x59
-#define PLL_SSC_PER_LSB_VAL	0xf1
-
-#define IDLL_TEST_REG		0x72
-#define START_CLK_HF		BIT(6)
-
-#define DES_BITLOCK_REG		0x86
-#define BIT_LOCK_LEVEL		0x01
-#define BIT_LOCK_CNT_512	(0x03 << 5)
-
-struct miphy365x_phy {
-	struct phy *phy;
-	void __iomem *base;
-	bool pcie_tx_pol_inv;
-	bool sata_tx_pol_inv;
-	u32 sata_gen;
-	u32 ctrlreg;
-	u8 type;
-};
-
-struct miphy365x_dev {
-	struct device *dev;
-	struct regmap *regmap;
-	struct mutex miphy_mutex;
-	struct miphy365x_phy **phys;
-	int nphys;
-};
-
-/*
- * These values are represented in Device tree. They are considered to be ABI
- * and although they can be extended any existing values must not change.
- */
-enum miphy_sata_gen {
-	SATA_GEN1 = 1,
-	SATA_GEN2,
-	SATA_GEN3
-};
-
-static u8 rx_tx_spd[] = {
-	0, /* GEN0 doesn't exist. */
-	TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL,
-	TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL,
-	TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL
-};
-
-/*
- * This function selects the system configuration,
- * either two SATA, one SATA and one PCIe, or two PCIe lanes.
- */
-static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
-			      struct miphy365x_dev *miphy_dev)
-{
-	bool sata = (miphy_phy->type == PHY_TYPE_SATA);
-
-	return regmap_update_bits(miphy_dev->regmap,
-				  miphy_phy->ctrlreg,
-				  SYSCFG_SELECT_SATA_MASK,
-				  sata << SYSCFG_SELECT_SATA_POS);
-}
-
-static int miphy365x_init_pcie_port(struct miphy365x_phy *miphy_phy,
-				    struct miphy365x_dev *miphy_dev)
-{
-	u8 val;
-
-	if (miphy_phy->pcie_tx_pol_inv) {
-		/* Invert Tx polarity and clear pci_txdetect_pol bit */
-		val = TERM_EN | PCI_EN | DES_BIT_LOCK_EN | TX_POL;
-		writeb_relaxed(val, miphy_phy->base + CTRL_REG);
-		writeb_relaxed(0x00, miphy_phy->base + PCIE_REG);
-	}
-
-	return 0;
-}
-
-static inline int miphy365x_hfc_not_rdy(struct miphy365x_phy *miphy_phy,
-					struct miphy365x_dev *miphy_dev)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT);
-	u8 mask = IDLL_RDY | PLL_RDY;
-	u8 regval;
-
-	do {
-		regval = readb_relaxed(miphy_phy->base + STATUS_REG);
-		if (!(regval & mask))
-			return 0;
-
-		usleep_range(2000, 2500);
-	} while (time_before(jiffies, timeout));
-
-	dev_err(miphy_dev->dev, "HFC ready timeout!\n");
-	return -EBUSY;
-}
-
-static inline int miphy365x_rdy(struct miphy365x_phy *miphy_phy,
-				struct miphy365x_dev *miphy_dev)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT);
-	u8 mask = IDLL_RDY | PLL_RDY;
-	u8 regval;
-
-	do {
-		regval = readb_relaxed(miphy_phy->base + STATUS_REG);
-		if ((regval & mask) == mask)
-			return 0;
-
-		usleep_range(2000, 2500);
-	} while (time_before(jiffies, timeout));
-
-	dev_err(miphy_dev->dev, "PHY not ready timeout!\n");
-	return -EBUSY;
-}
-
-static inline void miphy365x_set_comp(struct miphy365x_phy *miphy_phy,
-				      struct miphy365x_dev *miphy_dev)
-{
-	u8 val, mask;
-
-	if (miphy_phy->sata_gen == SATA_GEN1)
-		writeb_relaxed(COMP_2MHZ_RAT_GEN1,
-			       miphy_phy->base + COMP_CTRL2_REG);
-	else
-		writeb_relaxed(COMP_2MHZ_RAT,
-			       miphy_phy->base + COMP_CTRL2_REG);
-
-	if (miphy_phy->sata_gen != SATA_GEN3) {
-		writeb_relaxed(COMSR_COMP_REF,
-			       miphy_phy->base + COMP_CTRL3_REG);
-		/*
-		 * Force VCO current to value defined by address 0x5A
-		 * and disable PCIe100Mref bit
-		 * Enable auto load compensation for pll_i_bias
-		 */
-		writeb_relaxed(BYPASS_PLL_CAL, miphy_phy->base + PLL_CTRL2_REG);
-		writeb_relaxed(COMZC_IDLL, miphy_phy->base + COMP_IDLL_REG);
-	}
-
-	/*
-	 * Force restart compensation and enable auto load
-	 * for Comzc_Tx, Comzc_Rx and Comsr on macro
-	 */
-	val = START_COMSR | START_COMZC | COMP_AUTO_LOAD;
-	writeb_relaxed(val, miphy_phy->base + COMP_CTRL1_REG);
-
-	mask = COMSR_DONE | COMZC_DONE;
-	while ((readb_relaxed(miphy_phy->base + COMP_CTRL1_REG) & mask)	!= mask)
-		cpu_relax();
-}
-
-static inline void miphy365x_set_ssc(struct miphy365x_phy *miphy_phy,
-				     struct miphy365x_dev *miphy_dev)
-{
-	u8 val;
-
-	/*
-	 * SSC Settings. SSC will be enabled through Link
-	 * SSC Ampl. = 0.4%
-	 * SSC Freq = 31KHz
-	 */
-	writeb_relaxed(PLL_SSC_STEP_MSB_VAL,
-		       miphy_phy->base + PLL_SSC_STEP_MSB_REG);
-	writeb_relaxed(PLL_SSC_STEP_LSB_VAL,
-		       miphy_phy->base + PLL_SSC_STEP_LSB_REG);
-	writeb_relaxed(PLL_SSC_PER_MSB_VAL,
-		       miphy_phy->base + PLL_SSC_PER_MSB_REG);
-	writeb_relaxed(PLL_SSC_PER_LSB_VAL,
-		       miphy_phy->base + PLL_SSC_PER_LSB_REG);
-
-	/* SSC Settings complete */
-	if (miphy_phy->sata_gen == SATA_GEN1) {
-		val = PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL;
-		writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG);
-	} else {
-		val = SSC_EN | PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL;
-		writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG);
-	}
-}
-
-static int miphy365x_init_sata_port(struct miphy365x_phy *miphy_phy,
-				    struct miphy365x_dev *miphy_dev)
-{
-	int ret;
-	u8 val;
-
-	/*
-	 * Force PHY macro reset, PLL calibration reset, PLL reset
-	 * and assert Deserializer Reset
-	 */
-	val = RST_PLL | RST_PLL_CAL | RST_RX | RST_MACRO;
-	writeb_relaxed(val, miphy_phy->base + RESET_REG);
-
-	if (miphy_phy->sata_tx_pol_inv)
-		writeb_relaxed(TX_POL, miphy_phy->base + CTRL_REG);
-
-	/*
-	 * Force macro1 to use rx_lspd, tx_lspd
-	 * Force Rx_Clock on first I-DLL phase
-	 * Force Des in HP mode on macro, rx_lspd, tx_lspd for Gen2/3
-	 */
-	writeb_relaxed(SPDSEL_SEL, miphy_phy->base + BOUNDARY1_REG);
-	writeb_relaxed(START_CLK_HF, miphy_phy->base + IDLL_TEST_REG);
-	val = rx_tx_spd[miphy_phy->sata_gen];
-	writeb_relaxed(val, miphy_phy->base + BOUNDARY3_REG);
-
-	/* Wait for HFC_READY = 0 */
-	ret = miphy365x_hfc_not_rdy(miphy_phy, miphy_dev);
-	if (ret)
-		return ret;
-
-	/* Compensation Recalibration */
-	miphy365x_set_comp(miphy_phy, miphy_dev);
-
-	switch (miphy_phy->sata_gen) {
-	case SATA_GEN3:
-		/*
-		 * TX Swing target 550-600mv peak to peak diff
-		 * Tx Slew target 90-110ps rising/falling time
-		 * Rx Eq ON3, Sigdet threshold SDTH1
-		 */
-		val = PD_VDDTFILTER | CONF_GEN_SEL_GEN3;
-		writeb_relaxed(val, miphy_phy->base + BUF_SEL_REG);
-		val = SWING_VAL | PREEMPH_VAL;
-		writeb_relaxed(val, miphy_phy->base + TXBUF1_REG);
-		writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG);
-		writeb_relaxed(0x00, miphy_phy->base + RXBUF_OFFSET_CTRL_REG);
-		val = SDTHRES_VAL | EQ_ON3;
-		writeb_relaxed(val, miphy_phy->base + RXBUF_REG);
-		break;
-	case SATA_GEN2:
-		/*
-		 * conf gen sel=0x1 to program Gen2 banked registers
-		 * VDDT filter ON
-		 * Tx Swing target 550-600mV peak-to-peak diff
-		 * Tx Slew target 90-110 ps rising/falling time
-		 * RX Equalization ON1, Sigdet threshold SDTH1
-		 */
-		writeb_relaxed(CONF_GEN_SEL_GEN2,
-			       miphy_phy->base + BUF_SEL_REG);
-		writeb_relaxed(SWING_VAL, miphy_phy->base + TXBUF1_REG);
-		writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG);
-		val = SDTHRES_VAL | EQ_ON1;
-		writeb_relaxed(val, miphy_phy->base + RXBUF_REG);
-		break;
-	case SATA_GEN1:
-		/*
-		 * conf gen sel = 00b to program Gen1 banked registers
-		 * VDDT filter ON
-		 * Tx Swing target 500-550mV peak-to-peak diff
-		 * Tx Slew target120-140 ps rising/falling time
-		 */
-		writeb_relaxed(PD_VDDTFILTER, miphy_phy->base + BUF_SEL_REG);
-		writeb_relaxed(SWING_VAL_GEN1, miphy_phy->base + TXBUF1_REG);
-		writeb_relaxed(TXSLEW_VAL_GEN1,	miphy_phy->base + TXBUF2_REG);
-		break;
-	default:
-		break;
-	}
-
-	/* Force Macro1 in partial mode & release pll cal reset */
-	writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG);
-	usleep_range(100, 150);
-
-	miphy365x_set_ssc(miphy_phy, miphy_dev);
-
-	/* Wait for phy_ready */
-	ret = miphy365x_rdy(miphy_phy, miphy_dev);
-	if (ret)
-		return ret;
-
-	/*
-	 * Enable macro1 to use rx_lspd & tx_lspd
-	 * Release Rx_Clock on first I-DLL phase on macro1
-	 * Assert deserializer reset
-	 * des_bit_lock_en is set
-	 * bit lock detection strength
-	 * Deassert deserializer reset
-	 */
-	writeb_relaxed(0x00, miphy_phy->base + BOUNDARY1_REG);
-	writeb_relaxed(0x00, miphy_phy->base + IDLL_TEST_REG);
-	writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG);
-	val = miphy_phy->sata_tx_pol_inv ?
-		(TX_POL | DES_BIT_LOCK_EN) : DES_BIT_LOCK_EN;
-	writeb_relaxed(val, miphy_phy->base + CTRL_REG);
-
-	val = BIT_LOCK_CNT_512 | BIT_LOCK_LEVEL;
-	writeb_relaxed(val, miphy_phy->base + DES_BITLOCK_REG);
-	writeb_relaxed(0x00, miphy_phy->base + RESET_REG);
-
-	return 0;
-}
-
-static int miphy365x_init(struct phy *phy)
-{
-	struct miphy365x_phy *miphy_phy = phy_get_drvdata(phy);
-	struct miphy365x_dev *miphy_dev = dev_get_drvdata(phy->dev.parent);
-	int ret = 0;
-
-	mutex_lock(&miphy_dev->miphy_mutex);
-
-	ret = miphy365x_set_path(miphy_phy, miphy_dev);
-	if (ret) {
-		mutex_unlock(&miphy_dev->miphy_mutex);
-		return ret;
-	}
-
-	/* Initialise Miphy for PCIe or SATA */
-	if (miphy_phy->type == PHY_TYPE_PCIE)
-		ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
-	else
-		ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
-
-	mutex_unlock(&miphy_dev->miphy_mutex);
-
-	return ret;
-}
-
-static int miphy365x_get_addr(struct device *dev,
-		struct miphy365x_phy *miphy_phy, int index)
-{
-	struct device_node *phynode = miphy_phy->phy->dev.of_node;
-	const char *name;
-	int type = miphy_phy->type;
-	int ret;
-
-	ret = of_property_read_string_index(phynode, "reg-names", index, &name);
-	if (ret) {
-		dev_err(dev, "no reg-names property not found\n");
-		return ret;
-	}
-
-	if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
-	      (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
-		return 0;
-
-	miphy_phy->base = of_iomap(phynode, index);
-	if (!miphy_phy->base) {
-		dev_err(dev, "Failed to map %s\n", phynode->full_name);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct phy *miphy365x_xlate(struct device *dev,
-				   struct of_phandle_args *args)
-{
-	struct miphy365x_dev *miphy_dev = dev_get_drvdata(dev);
-	struct miphy365x_phy *miphy_phy = NULL;
-	struct device_node *phynode = args->np;
-	int ret, index;
-
-	if (args->args_count != 1) {
-		dev_err(dev, "Invalid number of cells in 'phy' property\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	for (index = 0; index < miphy_dev->nphys; index++)
-		if (phynode == miphy_dev->phys[index]->phy->dev.of_node) {
-			miphy_phy = miphy_dev->phys[index];
-			break;
-		}
-
-	if (!miphy_phy) {
-		dev_err(dev, "Failed to find appropriate phy\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	miphy_phy->type = args->args[0];
-
-	if (!(miphy_phy->type == PHY_TYPE_SATA ||
-	      miphy_phy->type == PHY_TYPE_PCIE)) {
-		dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
-		return ERR_PTR(-EINVAL);
-	}
-
-	/* Each port handles SATA and PCIE - third entry is always sysconf. */
-	for (index = 0; index < 3; index++) {
-		ret = miphy365x_get_addr(dev, miphy_phy, index);
-		if (ret < 0)
-			return ERR_PTR(ret);
-	}
-
-	return miphy_phy->phy;
-}
-
-static const struct phy_ops miphy365x_ops = {
-	.init		= miphy365x_init,
-	.owner		= THIS_MODULE,
-};
-
-static int miphy365x_of_probe(struct device_node *phynode,
-			      struct miphy365x_phy *miphy_phy)
-{
-	of_property_read_u32(phynode, "st,sata-gen", &miphy_phy->sata_gen);
-	if (!miphy_phy->sata_gen)
-		miphy_phy->sata_gen = SATA_GEN1;
-
-	miphy_phy->pcie_tx_pol_inv =
-		of_property_read_bool(phynode, "st,pcie-tx-pol-inv");
-
-	miphy_phy->sata_tx_pol_inv =
-		of_property_read_bool(phynode, "st,sata-tx-pol-inv");
-
-	return 0;
-}
-
-static int miphy365x_probe(struct platform_device *pdev)
-{
-	struct device_node *child, *np = pdev->dev.of_node;
-	struct miphy365x_dev *miphy_dev;
-	struct phy_provider *provider;
-	struct phy *phy;
-	int ret, port = 0;
-
-	miphy_dev = devm_kzalloc(&pdev->dev, sizeof(*miphy_dev), GFP_KERNEL);
-	if (!miphy_dev)
-		return -ENOMEM;
-
-	miphy_dev->nphys = of_get_child_count(np);
-	miphy_dev->phys = devm_kcalloc(&pdev->dev, miphy_dev->nphys,
-				       sizeof(*miphy_dev->phys), GFP_KERNEL);
-	if (!miphy_dev->phys)
-		return -ENOMEM;
-
-	miphy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
-	if (IS_ERR(miphy_dev->regmap)) {
-		dev_err(miphy_dev->dev, "No syscfg phandle specified\n");
-		return PTR_ERR(miphy_dev->regmap);
-	}
-
-	miphy_dev->dev = &pdev->dev;
-
-	dev_set_drvdata(&pdev->dev, miphy_dev);
-
-	mutex_init(&miphy_dev->miphy_mutex);
-
-	for_each_child_of_node(np, child) {
-		struct miphy365x_phy *miphy_phy;
-
-		miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy),
-					 GFP_KERNEL);
-		if (!miphy_phy) {
-			ret = -ENOMEM;
-			goto put_child;
-		}
-
-		miphy_dev->phys[port] = miphy_phy;
-
-		phy = devm_phy_create(&pdev->dev, child, &miphy365x_ops);
-		if (IS_ERR(phy)) {
-			dev_err(&pdev->dev, "failed to create PHY\n");
-			ret = PTR_ERR(phy);
-			goto put_child;
-		}
-
-		miphy_dev->phys[port]->phy = phy;
-
-		ret = miphy365x_of_probe(child, miphy_phy);
-		if (ret)
-			goto put_child;
-
-		phy_set_drvdata(phy, miphy_dev->phys[port]);
-
-		port++;
-		/* sysconfig offsets are indexed from 1 */
-		ret = of_property_read_u32_index(np, "st,syscfg", port,
-					&miphy_phy->ctrlreg);
-		if (ret) {
-			dev_err(&pdev->dev, "No sysconfig offset found\n");
-			goto put_child;
-		}
-	}
-
-	provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate);
-	return PTR_ERR_OR_ZERO(provider);
-put_child:
-	of_node_put(child);
-	return ret;
-}
-
-static const struct of_device_id miphy365x_of_match[] = {
-	{ .compatible = "st,miphy365x-phy", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, miphy365x_of_match);
-
-static struct platform_driver miphy365x_driver = {
-	.probe	= miphy365x_probe,
-	.driver = {
-		.name	= "miphy365x-phy",
-		.of_match_table	= miphy365x_of_match,
-	}
-};
-module_platform_driver(miphy365x_driver);
-
-MODULE_AUTHOR("Alexandre Torgue <alexandre.torgue@st.com>");
-MODULE_DESCRIPTION("STMicroelectronics miphy365x driver");
-MODULE_LICENSE("GPL v2");

drivers/phy/phy-rcar-gen3-usb2.c

@@ -70,6 +70,7 @@
 #define USB2_LINECTRL1_DP_RPD		BIT(18)
 #define USB2_LINECTRL1_DMRPD_EN		BIT(17)
 #define USB2_LINECTRL1_DM_RPD		BIT(16)
+#define USB2_LINECTRL1_OPMODE_NODRV	BIT(6)
 
 /* ADPCTRL */
 #define USB2_ADPCTRL_OTGSESSVLD		BIT(20)
@@ -161,6 +162,43 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
 	schedule_work(&ch->work);
 }
 
+static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val;
+
+	val = readl(usb2_base + USB2_LINECTRL1);
+	writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+
+	rcar_gen3_set_linectrl(ch, 1, 1);
+	rcar_gen3_set_host_mode(ch, 1);
+	rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+	val = readl(usb2_base + USB2_LINECTRL1);
+	writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
+{
+	rcar_gen3_set_linectrl(ch, 0, 1);
+	rcar_gen3_set_host_mode(ch, 0);
+	rcar_gen3_enable_vbus_ctrl(ch, 1);
+}
+
+static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val;
+
+	val = readl(usb2_base + USB2_OBINTEN);
+	writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+
+	rcar_gen3_enable_vbus_ctrl(ch, 0);
+	rcar_gen3_init_for_host(ch);
+
+	writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+}
+
 static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
 {
 	return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
@@ -174,6 +212,65 @@ static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
 		rcar_gen3_init_for_peri(ch);
 }
 
+static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
+{
+	return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
+}
+
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+	bool is_b_device, is_host, new_mode_is_host;
+
+	if (!ch->has_otg || !ch->phy->init_count)
+		return -EIO;
+
+	/*
+	 * is_b_device: true is B-Device. false is A-Device.
+	 * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
+	 */
+	is_b_device = rcar_gen3_check_id(ch);
+	is_host = rcar_gen3_is_host(ch);
+	if (!strncmp(buf, "host", strlen("host")))
+		new_mode_is_host = true;
+	else if (!strncmp(buf, "peripheral", strlen("peripheral")))
+		new_mode_is_host = false;
+	else
+		return -EINVAL;
+
+	/* If current and new mode is the same, this returns the error */
+	if (is_host == new_mode_is_host)
+		return -EINVAL;
+
+	if (new_mode_is_host) {		/* And is_host must be false */
+		if (!is_b_device)	/* A-Peripheral */
+			rcar_gen3_init_from_a_peri_to_a_host(ch);
+		else			/* B-Peripheral */
+			rcar_gen3_init_for_b_host(ch);
+	} else {			/* And is_host must be true */
+		if (!is_b_device)	/* A-Host */
+			rcar_gen3_init_for_a_peri(ch);
+		else			/* B-Host */
+			rcar_gen3_init_for_peri(ch);
+	}
+
+	return count;
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+	if (!ch->has_otg || !ch->phy->init_count)
+		return -EIO;
+
+	return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
+							    "peripheral");
+}
+static DEVICE_ATTR_RW(role);
+
 static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 {
 	void __iomem *usb2_base = ch->base;
@@ -351,21 +448,40 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		channel->vbus = NULL;
 	}
 
+	platform_set_drvdata(pdev, channel);
 	phy_set_drvdata(channel->phy, channel);
 
 	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(provider))
+	if (IS_ERR(provider)) {
 		dev_err(dev, "Failed to register PHY provider\n");
+	} else if (channel->has_otg) {
+		int ret;
+
+		ret = device_create_file(dev, &dev_attr_role);
+		if (ret < 0)
+			return ret;
+	}
 
 	return PTR_ERR_OR_ZERO(provider);
 }
 
+static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
+{
+	struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
+
+	if (channel->has_otg)
+		device_remove_file(&pdev->dev, &dev_attr_role);
+
+	return 0;
+};
+
 static struct platform_driver rcar_gen3_phy_usb2_driver = {
 	.driver = {
 		.name		= "phy_rcar_gen3_usb2",
 		.of_match_table	= rcar_gen3_phy_usb2_match_table,
 	},
 	.probe	= rcar_gen3_phy_usb2_probe,
+	.remove = rcar_gen3_phy_usb2_remove,
 };
 module_platform_driver(rcar_gen3_phy_usb2_driver);
 

drivers/phy/phy-rockchip-emmc.c

@@ -132,7 +132,7 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
 		default:
 			ideal_rate = 200000000;
 			break;
-		};
+		}
 
 		diff = (rate > ideal_rate) ?
 			rate - ideal_rate : ideal_rate - rate;

drivers/phy/phy-rockchip-inno-usb2.c

@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
+#include <linux/extcon.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/gpio/consumer.h>
@@ -30,11 +31,15 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 #define BIT_WRITEABLE_SHIFT	16
 #define SCHEDULE_DELAY		(60 * HZ)
+#define OTG_SCHEDULE_DELAY	(2 * HZ)
 
 enum rockchip_usb2phy_port_id {
 	USB2PHY_PORT_OTG,
@@ -49,6 +54,37 @@ enum rockchip_usb2phy_host_state {
 	PHY_STATE_FS_LS_ONLINE	= 4,
 };
 
+/**
+ * Different states involved in USB charger detection.
+ * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
+ *				process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
+ *				between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
+ *				between DCP and CDP).
+ * USB_CHG_STATE_DETECTED	USB charger type is determined.
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+static const unsigned int rockchip_usb2phy_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_NONE,
+};
+
 struct usb2phy_reg {
 	unsigned int	offset;
 	unsigned int	bitend;
@@ -57,20 +93,56 @@ struct usb2phy_reg {
 	unsigned int	enable;
 };
 
+/**
+ * struct rockchip_chg_det_reg: usb charger detect registers
+ * @cp_det: charging port detected successfully.
+ * @dcp_det: dedicated charging port detected successfully.
+ * @dp_det: assert data pin connect successfully.
+ * @idm_sink_en: open dm sink curren.
+ * @idp_sink_en: open dp sink current.
+ * @idp_src_en: open dm source current.
+ * @rdm_pdwn_en: open dm pull down resistor.
+ * @vdm_src_en: open dm voltage source.
+ * @vdp_src_en: open dp voltage source.
+ * @opmode: utmi operational mode.
+ */
+struct rockchip_chg_det_reg {
+	struct usb2phy_reg	cp_det;
+	struct usb2phy_reg	dcp_det;
+	struct usb2phy_reg	dp_det;
+	struct usb2phy_reg	idm_sink_en;
+	struct usb2phy_reg	idp_sink_en;
+	struct usb2phy_reg	idp_src_en;
+	struct usb2phy_reg	rdm_pdwn_en;
+	struct usb2phy_reg	vdm_src_en;
+	struct usb2phy_reg	vdp_src_en;
+	struct usb2phy_reg	opmode;
+};
+
 /**
  * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
  * @phy_sus: phy suspend register.
+ * @bvalid_det_en: vbus valid rise detection enable register.
+ * @bvalid_det_st: vbus valid rise detection status register.
+ * @bvalid_det_clr: vbus valid rise detection clear register.
  * @ls_det_en: linestate detection enable register.
  * @ls_det_st: linestate detection state register.
  * @ls_det_clr: linestate detection clear register.
+ * @utmi_avalid: utmi vbus avalid status register.
+ * @utmi_bvalid: utmi vbus bvalid status register.
  * @utmi_ls: utmi linestate state register.
  * @utmi_hstdet: utmi host disconnect register.
  */
 struct rockchip_usb2phy_port_cfg {
 	struct usb2phy_reg	phy_sus;
+	struct usb2phy_reg	bvalid_det_en;
+	struct usb2phy_reg	bvalid_det_st;
+	struct usb2phy_reg	bvalid_det_clr;
 	struct usb2phy_reg	ls_det_en;
 	struct usb2phy_reg	ls_det_st;
 	struct usb2phy_reg	ls_det_clr;
+	struct usb2phy_reg	utmi_avalid;
+	struct usb2phy_reg	utmi_bvalid;
 	struct usb2phy_reg	utmi_ls;
 	struct usb2phy_reg	utmi_hstdet;
 };
@@ -80,31 +152,51 @@ struct rockchip_usb2phy_port_cfg {
  * @reg: the address offset of grf for usb-phy config.
  * @num_ports: specify how many ports that the phy has.
  * @clkout_ctl: keep on/turn off output clk of phy.
+ * @chg_det: charger detection registers.
  */
 struct rockchip_usb2phy_cfg {
 	unsigned int	reg;
 	unsigned int	num_ports;
 	struct usb2phy_reg	clkout_ctl;
 	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
+	const struct rockchip_chg_det_reg	chg_det;
 };
 
 /**
  * struct rockchip_usb2phy_port: usb-phy port data.
  * @port_id: flag for otg port or host port.
  * @suspended: phy suspended flag.
+ * @utmi_avalid: utmi avalid status usage flag.
+ *	true	- use avalid to get vbus status
+ *	flase	- use bvalid to get vbus status
+ * @vbus_attached: otg device vbus status.
+ * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
  * @ls_irq: IRQ number assigned for linestate detection.
  * @mutex: for register updating in sm_work.
- * @sm_work: OTG state machine work.
+ * @chg_work: charge detect work.
+ * @otg_sm_work: OTG state machine work.
+ * @sm_work: HOST state machine work.
  * @phy_cfg: port register configuration, assigned by driver data.
+ * @event_nb: hold event notification callback.
+ * @state: define OTG enumeration states before device reset.
+ * @mode: the dr_mode of the controller.
  */
 struct rockchip_usb2phy_port {
 	struct phy	*phy;
 	unsigned int	port_id;
 	bool		suspended;
+	bool		utmi_avalid;
+	bool		vbus_attached;
+	int		bvalid_irq;
 	int		ls_irq;
 	struct mutex	mutex;
+	struct		delayed_work chg_work;
+	struct		delayed_work otg_sm_work;
 	struct		delayed_work sm_work;
 	const struct	rockchip_usb2phy_port_cfg *port_cfg;
+	struct notifier_block	event_nb;
+	enum usb_otg_state	state;
+	enum usb_dr_mode	mode;
 };
 
 /**
@@ -113,6 +205,11 @@ struct rockchip_usb2phy_port {
  * @clk: clock struct of phy input clk.
  * @clk480m: clock struct of phy output clk.
  * @clk_hw: clock struct of phy output clk management.
+ * @chg_state: states involved in USB charger detection.
+ * @chg_type: USB charger types.
+ * @dcd_retries: The retry count used to track Data contact
+ *		 detection process.
+ * @edev: extcon device for notification registration
  * @phy_cfg: phy register configuration, assigned by driver data.
  * @ports: phy port instance.
  */
@@ -122,6 +219,10 @@ struct rockchip_usb2phy {
 	struct clk	*clk;
 	struct clk	*clk480m;
 	struct clk_hw	clk480m_hw;
+	enum usb_chg_state	chg_state;
+	enum power_supply_type	chg_type;
+	u8			dcd_retries;
+	struct extcon_dev	*edev;
 	const struct rockchip_usb2phy_cfg	*phy_cfg;
 	struct rockchip_usb2phy_port	ports[USB2PHY_NUM_PORTS];
 };
@@ -153,7 +254,7 @@ static inline bool property_enabled(struct rockchip_usb2phy *rphy,
 	return tmp == reg->enable;
 }
 
-static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
+static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
@@ -165,14 +266,14 @@ static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
 		if (ret)
 			return ret;
 
-		/* waitting for the clk become stable */
-		mdelay(1);
+		/* waiting for the clk become stable */
+		usleep_range(1200, 1300);
 	}
 
 	return 0;
 }
 
-static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
@@ -181,7 +282,7 @@ static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
 	property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
 }
 
-static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
+static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
@@ -197,9 +298,9 @@ rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
 }
 
 static const struct clk_ops rockchip_usb2phy_clkout_ops = {
-	.enable = rockchip_usb2phy_clk480m_enable,
-	.disable = rockchip_usb2phy_clk480m_disable,
-	.is_enabled = rockchip_usb2phy_clk480m_enabled,
+	.prepare = rockchip_usb2phy_clk480m_prepare,
+	.unprepare = rockchip_usb2phy_clk480m_unprepare,
+	.is_prepared = rockchip_usb2phy_clk480m_prepared,
 	.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
 };
 
@@ -263,33 +364,84 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
 	return ret;
 }
 
+static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+	struct device_node *node = rphy->dev->of_node;
+	struct extcon_dev *edev;
+
+	if (of_property_read_bool(node, "extcon")) {
+		edev = extcon_get_edev_by_phandle(rphy->dev, 0);
+		if (IS_ERR(edev)) {
+			if (PTR_ERR(edev) != -EPROBE_DEFER)
+				dev_err(rphy->dev, "Invalid or missing extcon\n");
+			return PTR_ERR(edev);
+		}
+	} else {
+		/* Initialize extcon device */
+		edev = devm_extcon_dev_allocate(rphy->dev,
+						rockchip_usb2phy_extcon_cable);
+
+		if (IS_ERR(edev))
+			return -ENOMEM;
+
+		ret = devm_extcon_dev_register(rphy->dev, edev);
+		if (ret) {
+			dev_err(rphy->dev, "failed to register extcon device\n");
+			return ret;
+		}
+	}
+
+	rphy->edev = edev;
+
+	return 0;
+}
+
 static int rockchip_usb2phy_init(struct phy *phy)
 {
 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
-	int ret;
+	int ret = 0;
 
-	if (rport->port_id == USB2PHY_PORT_HOST) {
-		/* clear linestate and enable linestate detect irq */
 	mutex_lock(&rport->mutex);
 
-		ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
-		if (ret) {
-			mutex_unlock(&rport->mutex);
-			return ret;
+	if (rport->port_id == USB2PHY_PORT_OTG) {
+		if (rport->mode != USB_DR_MODE_HOST) {
+			/* clear bvalid status and enable bvalid detect irq */
+			ret = property_enable(rphy,
+					      &rport->port_cfg->bvalid_det_clr,
+					      true);
+			if (ret)
+				goto out;
+
+			ret = property_enable(rphy,
+					      &rport->port_cfg->bvalid_det_en,
+					      true);
+			if (ret)
+				goto out;
+
+			schedule_delayed_work(&rport->otg_sm_work,
+					      OTG_SCHEDULE_DELAY);
+		} else {
+			/* If OTG works in host only mode, do nothing. */
+			dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
 		}
+	} else if (rport->port_id == USB2PHY_PORT_HOST) {
+		/* clear linestate and enable linestate detect irq */
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		if (ret)
+			goto out;
 
 		ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
-		if (ret) {
-			mutex_unlock(&rport->mutex);
-			return ret;
-		}
+		if (ret)
+			goto out;
 
-		mutex_unlock(&rport->mutex);
 		schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
 	}
 
-	return 0;
+out:
+	mutex_unlock(&rport->mutex);
+	return ret;
 }
 
 static int rockchip_usb2phy_power_on(struct phy *phy)
@@ -340,7 +492,11 @@ static int rockchip_usb2phy_exit(struct phy *phy)
 {
 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 
-	if (rport->port_id == USB2PHY_PORT_HOST)
+	if (rport->port_id == USB2PHY_PORT_OTG &&
+	    rport->mode != USB_DR_MODE_HOST) {
+		cancel_delayed_work_sync(&rport->otg_sm_work);
+		cancel_delayed_work_sync(&rport->chg_work);
+	} else if (rport->port_id == USB2PHY_PORT_HOST)
 		cancel_delayed_work_sync(&rport->sm_work);
 
 	return 0;
@@ -354,6 +510,249 @@ static const struct phy_ops rockchip_usb2phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port,
+			     otg_sm_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	static unsigned int cable;
+	unsigned long delay;
+	bool vbus_attach, sch_work, notify_charger;
+
+	if (rport->utmi_avalid)
+		vbus_attach =
+			property_enabled(rphy, &rport->port_cfg->utmi_avalid);
+	else
+		vbus_attach =
+			property_enabled(rphy, &rport->port_cfg->utmi_bvalid);
+
+	sch_work = false;
+	notify_charger = false;
+	delay = OTG_SCHEDULE_DELAY;
+	dev_dbg(&rport->phy->dev, "%s otg sm work\n",
+		usb_otg_state_string(rport->state));
+
+	switch (rport->state) {
+	case OTG_STATE_UNDEFINED:
+		rport->state = OTG_STATE_B_IDLE;
+		if (!vbus_attach)
+			rockchip_usb2phy_power_off(rport->phy);
+		/* fall through */
+	case OTG_STATE_B_IDLE:
+		if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) {
+			dev_dbg(&rport->phy->dev, "usb otg host connect\n");
+			rport->state = OTG_STATE_A_HOST;
+			rockchip_usb2phy_power_on(rport->phy);
+			return;
+		} else if (vbus_attach) {
+			dev_dbg(&rport->phy->dev, "vbus_attach\n");
+			switch (rphy->chg_state) {
+			case USB_CHG_STATE_UNDEFINED:
+				schedule_delayed_work(&rport->chg_work, 0);
+				return;
+			case USB_CHG_STATE_DETECTED:
+				switch (rphy->chg_type) {
+				case POWER_SUPPLY_TYPE_USB:
+					dev_dbg(&rport->phy->dev,
+						"sdp cable is connecetd\n");
+					rockchip_usb2phy_power_on(rport->phy);
+					rport->state = OTG_STATE_B_PERIPHERAL;
+					notify_charger = true;
+					sch_work = true;
+					cable = EXTCON_CHG_USB_SDP;
+					break;
+				case POWER_SUPPLY_TYPE_USB_DCP:
+					dev_dbg(&rport->phy->dev,
+						"dcp cable is connecetd\n");
+					rockchip_usb2phy_power_off(rport->phy);
+					notify_charger = true;
+					sch_work = true;
+					cable = EXTCON_CHG_USB_DCP;
+					break;
+				case POWER_SUPPLY_TYPE_USB_CDP:
+					dev_dbg(&rport->phy->dev,
+						"cdp cable is connecetd\n");
+					rockchip_usb2phy_power_on(rport->phy);
+					rport->state = OTG_STATE_B_PERIPHERAL;
+					notify_charger = true;
+					sch_work = true;
+					cable = EXTCON_CHG_USB_CDP;
+					break;
+				default:
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+		} else {
+			notify_charger = true;
+			rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+			rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+		}
+
+		if (rport->vbus_attached != vbus_attach) {
+			rport->vbus_attached = vbus_attach;
+
+			if (notify_charger && rphy->edev)
+				extcon_set_cable_state_(rphy->edev,
+							cable, vbus_attach);
+		}
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!vbus_attach) {
+			dev_dbg(&rport->phy->dev, "usb disconnect\n");
+			rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+			rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+			rport->state = OTG_STATE_B_IDLE;
+			delay = 0;
+			rockchip_usb2phy_power_off(rport->phy);
+		}
+		sch_work = true;
+		break;
+	case OTG_STATE_A_HOST:
+		if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) {
+			dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
+			rport->state = OTG_STATE_B_IDLE;
+			rockchip_usb2phy_power_off(rport->phy);
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (sch_work)
+		schedule_delayed_work(&rport->otg_sm_work, delay);
+}
+
+static const char *chg_to_string(enum power_supply_type chg_type)
+{
+	switch (chg_type) {
+	case POWER_SUPPLY_TYPE_USB:
+		return "USB_SDP_CHARGER";
+	case POWER_SUPPLY_TYPE_USB_DCP:
+		return "USB_DCP_CHARGER";
+	case POWER_SUPPLY_TYPE_USB_CDP:
+		return "USB_CDP_CHARGER";
+	default:
+		return "INVALID_CHARGER";
+	}
+}
+
+static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
+				    bool en)
+{
+	property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
+	property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en);
+}
+
+static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
+					    bool en)
+{
+	property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en);
+	property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en);
+}
+
+static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
+					      bool en)
+{
+	property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en);
+	property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en);
+}
+
+#define CHG_DCD_POLL_TIME	(100 * HZ / 1000)
+#define CHG_DCD_MAX_RETRIES	6
+#define CHG_PRIMARY_DET_TIME	(40 * HZ / 1000)
+#define CHG_SECONDARY_DET_TIME	(40 * HZ / 1000)
+static void rockchip_chg_detect_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port, chg_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	bool is_dcd, tmout, vout;
+	unsigned long delay;
+
+	dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
+		rphy->chg_state);
+	switch (rphy->chg_state) {
+	case USB_CHG_STATE_UNDEFINED:
+		if (!rport->suspended)
+			rockchip_usb2phy_power_off(rport->phy);
+		/* put the controller in non-driving mode */
+		property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false);
+		/* Start DCD processing stage 1 */
+		rockchip_chg_enable_dcd(rphy, true);
+		rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+		rphy->dcd_retries = 0;
+		delay = CHG_DCD_POLL_TIME;
+		break;
+	case USB_CHG_STATE_WAIT_FOR_DCD:
+		/* get data contact detection status */
+		is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det);
+		tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
+		/* stage 2 */
+		if (is_dcd || tmout) {
+			/* stage 4 */
+			/* Turn off DCD circuitry */
+			rockchip_chg_enable_dcd(rphy, false);
+			/* Voltage Source on DP, Probe on DM */
+			rockchip_chg_enable_primary_det(rphy, true);
+			delay = CHG_PRIMARY_DET_TIME;
+			rphy->chg_state = USB_CHG_STATE_DCD_DONE;
+		} else {
+			/* stage 3 */
+			delay = CHG_DCD_POLL_TIME;
+		}
+		break;
+	case USB_CHG_STATE_DCD_DONE:
+		vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det);
+		rockchip_chg_enable_primary_det(rphy, false);
+		if (vout) {
+			/* Voltage Source on DM, Probe on DP  */
+			rockchip_chg_enable_secondary_det(rphy, true);
+			delay = CHG_SECONDARY_DET_TIME;
+			rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+		} else {
+			if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
+				/* floating charger found */
+				rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+				rphy->chg_state = USB_CHG_STATE_DETECTED;
+				delay = 0;
+			} else {
+				rphy->chg_type = POWER_SUPPLY_TYPE_USB;
+				rphy->chg_state = USB_CHG_STATE_DETECTED;
+				delay = 0;
+			}
+		}
+		break;
+	case USB_CHG_STATE_PRIMARY_DONE:
+		vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det);
+		/* Turn off voltage source */
+		rockchip_chg_enable_secondary_det(rphy, false);
+		if (vout)
+			rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+		else
+			rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP;
+		/* fall through */
+	case USB_CHG_STATE_SECONDARY_DONE:
+		rphy->chg_state = USB_CHG_STATE_DETECTED;
+		delay = 0;
+		/* fall through */
+	case USB_CHG_STATE_DETECTED:
+		/* put the controller in normal mode */
+		property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true);
+		rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+		dev_info(&rport->phy->dev, "charger = %s\n",
+			 chg_to_string(rphy->chg_type));
+		return;
+	default:
+		return;
+	}
+
+	schedule_delayed_work(&rport->chg_work, delay);
+}
+
 /*
  * The function manage host-phy port state and suspend/resume phy port
  * to save power.
@@ -485,6 +884,26 @@ static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* clear bvalid detect irq pending status */
+	property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true);
+
+	mutex_unlock(&rport->mutex);
+
+	rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+
+	return IRQ_HANDLED;
+}
+
 static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
 					   struct rockchip_usb2phy_port *rport,
 					   struct device_node *child_np)
@@ -509,13 +928,86 @@ static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
 					IRQF_ONESHOT,
 					"rockchip_usb2phy", rport);
 	if (ret) {
-		dev_err(rphy->dev, "failed to request irq handle\n");
+		dev_err(rphy->dev, "failed to request linestate irq handle\n");
 		return ret;
 	}
 
 	return 0;
 }
 
+static int rockchip_otg_event(struct notifier_block *nb,
+			      unsigned long event, void *ptr)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(nb, struct rockchip_usb2phy_port, event_nb);
+
+	schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY);
+
+	return NOTIFY_DONE;
+}
+
+static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+					  struct rockchip_usb2phy_port *rport,
+					  struct device_node *child_np)
+{
+	int ret;
+
+	rport->port_id = USB2PHY_PORT_OTG;
+	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
+	rport->state = OTG_STATE_UNDEFINED;
+
+	/*
+	 * set suspended flag to true, but actually don't
+	 * put phy in suspend mode, it aims to enable usb
+	 * phy and clock in power_on() called by usb controller
+	 * driver during probe.
+	 */
+	rport->suspended = true;
+	rport->vbus_attached = false;
+
+	mutex_init(&rport->mutex);
+
+	rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
+	if (rport->mode == USB_DR_MODE_HOST) {
+		ret = 0;
+		goto out;
+	}
+
+	INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
+	INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
+
+	rport->utmi_avalid =
+		of_property_read_bool(child_np, "rockchip,utmi-avalid");
+
+	rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+	if (rport->bvalid_irq < 0) {
+		dev_err(rphy->dev, "no vbus valid irq provided\n");
+		ret = rport->bvalid_irq;
+		goto out;
+	}
+
+	ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL,
+					rockchip_usb2phy_bvalid_irq,
+					IRQF_ONESHOT,
+					"rockchip_usb2phy_bvalid", rport);
+	if (ret) {
+		dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n");
+		goto out;
+	}
+
+	if (!IS_ERR(rphy->edev)) {
+		rport->event_nb.notifier_call = rockchip_otg_event;
+
+		ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST,
+					       &rport->event_nb);
+		if (ret)
+			dev_err(rphy->dev, "register USB HOST notifier failed\n");
+	}
+
+out:
+	return ret;
+}
+
 static int rockchip_usb2phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -553,8 +1045,14 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 
 	rphy->dev = dev;
 	phy_cfgs = match->data;
+	rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+	rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
 	platform_set_drvdata(pdev, rphy);
 
+	ret = rockchip_usb2phy_extcon_register(rphy);
+	if (ret)
+		return ret;
+
 	/* find out a proper config which can be matched with dt. */
 	index = 0;
 	while (phy_cfgs[index].reg) {
@@ -591,13 +1089,9 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
 		struct phy *phy;
 
-		/*
-		 * This driver aim to support both otg-port and host-port,
-		 * but unfortunately, the otg part is not ready in current,
-		 * so this comments and below codes are interim, which should
-		 * be changed after otg-port is supplied soon.
-		 */
-		if (of_node_cmp(child_np->name, "host-port"))
+		/* This driver aims to support both otg-port and host-port */
+		if (of_node_cmp(child_np->name, "host-port") &&
+		    of_node_cmp(child_np->name, "otg-port"))
 			goto next_child;
 
 		phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
@@ -610,9 +1104,18 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		rport->phy = phy;
 		phy_set_drvdata(rport->phy, rport);
 
-		ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np);
+		/* initialize otg/host port separately */
+		if (!of_node_cmp(child_np->name, "host-port")) {
+			ret = rockchip_usb2phy_host_port_init(rphy, rport,
+							      child_np);
 			if (ret)
 				goto put_child;
+		} else {
+			ret = rockchip_usb2phy_otg_port_init(rphy, rport,
+							     child_np);
+			if (ret)
+				goto put_child;
+		}
 
 next_child:
 		/* to prevent out of boundary */
@@ -658,6 +1161,14 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 		.num_ports	= 2,
 		.clkout_ctl	= { 0xe450, 4, 4, 1, 0 },
 		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0xe454, 1, 0, 2, 1 },
+				.bvalid_det_en	= { 0xe3c0, 3, 3, 0, 1 },
+				.bvalid_det_st	= { 0xe3e0, 3, 3, 0, 1 },
+				.bvalid_det_clr	= { 0xe3d0, 3, 3, 0, 1 },
+				.utmi_avalid	= { 0xe2ac, 7, 7, 0, 1 },
+				.utmi_bvalid	= { 0xe2ac, 12, 12, 0, 1 },
+			},
 			[USB2PHY_PORT_HOST] = {
 				.phy_sus	= { 0xe458, 1, 0, 0x2, 0x1 },
 				.ls_det_en	= { 0xe3c0, 6, 6, 0, 1 },
@@ -667,12 +1178,32 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 				.utmi_hstdet	= { 0xe2ac, 23, 23, 0, 1 }
 			}
 		},
+		.chg_det = {
+			.opmode		= { 0xe454, 3, 0, 5, 1 },
+			.cp_det		= { 0xe2ac, 2, 2, 0, 1 },
+			.dcp_det	= { 0xe2ac, 1, 1, 0, 1 },
+			.dp_det		= { 0xe2ac, 0, 0, 0, 1 },
+			.idm_sink_en	= { 0xe450, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0xe450, 7, 7, 0, 1 },
+			.idp_src_en	= { 0xe450, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0xe450, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0xe450, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0xe450, 11, 11, 0, 1 },
+		},
 	},
 	{
 		.reg		= 0xe460,
 		.num_ports	= 2,
 		.clkout_ctl	= { 0xe460, 4, 4, 1, 0 },
 		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus        = { 0xe464, 1, 0, 2, 1 },
+				.bvalid_det_en  = { 0xe3c0, 8, 8, 0, 1 },
+				.bvalid_det_st  = { 0xe3e0, 8, 8, 0, 1 },
+				.bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+				.utmi_avalid	= { 0xe2ac, 10, 10, 0, 1 },
+				.utmi_bvalid    = { 0xe2ac, 16, 16, 0, 1 },
+			},
 			[USB2PHY_PORT_HOST] = {
 				.phy_sus	= { 0xe468, 1, 0, 0x2, 0x1 },
 				.ls_det_en	= { 0xe3c0, 11, 11, 0, 1 },

drivers/phy/phy-s5pv210-usb2.c

@@ -103,7 +103,7 @@ static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on)
 		break;
 	default:
 		return;
-	};
+	}
 
 	regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET,
 							mask, on ? 0 : mask);
@@ -127,7 +127,7 @@ static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 		rstbits =	S5PV210_URSTCON_PHY1_ALL |
 				S5PV210_URSTCON_HOST_LINK_ALL;
 		break;
-	};
+	}
 
 	if (on) {
 		writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK);

drivers/phy/phy-stih41x-usb.c

-/*
- * Copyright (C) 2014 STMicroelectronics
- *
- * STMicroelectronics PHY driver for STiH41x USB.
- *
- * Author: Maxime Coquelin <maxime.coquelin@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/clk.h>
-#include <linux/phy/phy.h>
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
-
-#define SYSCFG332  0x80
-#define SYSCFG2520 0x820
-
-/**
- * struct stih41x_usb_cfg - SoC specific PHY register mapping
- * @syscfg: Offset in syscfg registers bank
- * @cfg_mask: Bits mask for PHY configuration
- * @cfg: Static configuration value for PHY
- * @oscok: Notify the PHY oscillator clock is ready
- *	   Setting this bit enable the PHY
- */
-struct stih41x_usb_cfg {
-	u32 syscfg;
-	u32 cfg_mask;
-	u32 cfg;
-	u32 oscok;
-};
-
-/**
- * struct stih41x_usb_phy - Private data for the PHY
- * @dev: device for this controller
- * @regmap: Syscfg registers bank in which PHY is configured
- * @cfg: SoC specific PHY register mapping
- * @clk: Oscillator used by the PHY
- */
-struct stih41x_usb_phy {
-	struct device *dev;
-	struct regmap *regmap;
-	const struct stih41x_usb_cfg *cfg;
-	struct clk *clk;
-};
-
-static struct stih41x_usb_cfg stih415_usb_phy_cfg = {
-	.syscfg = SYSCFG332,
-	.cfg_mask = 0x3f,
-	.cfg = 0x38,
-	.oscok = BIT(6),
-};
-
-static struct stih41x_usb_cfg stih416_usb_phy_cfg = {
-	.syscfg = SYSCFG2520,
-	.cfg_mask = 0x33f,
-	.cfg = 0x238,
-	.oscok = BIT(6),
-};
-
-static int stih41x_usb_phy_init(struct phy *phy)
-{
-	struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
-
-	return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
-			   phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg);
-}
-
-static int stih41x_usb_phy_power_on(struct phy *phy)
-{
-	struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
-	int ret;
-
-	ret = clk_prepare_enable(phy_dev->clk);
-	if (ret) {
-		dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n");
-		return ret;
-	}
-
-	ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
-				 phy_dev->cfg->oscok, phy_dev->cfg->oscok);
-	if (ret)
-		clk_disable_unprepare(phy_dev->clk);
-
-	return ret;
-}
-
-static int stih41x_usb_phy_power_off(struct phy *phy)
-{
-	struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
-	int ret;
-
-	ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
-			phy_dev->cfg->oscok, 0);
-	if (ret) {
-		dev_err(phy_dev->dev, "Failed to clear oscok bit\n");
-		return ret;
-	}
-
-	clk_disable_unprepare(phy_dev->clk);
-
-	return 0;
-}
-
-static const struct phy_ops stih41x_usb_phy_ops = {
-	.init		= stih41x_usb_phy_init,
-	.power_on	= stih41x_usb_phy_power_on,
-	.power_off	= stih41x_usb_phy_power_off,
-	.owner		= THIS_MODULE,
-};
-
-static const struct of_device_id stih41x_usb_phy_of_match[];
-
-static int stih41x_usb_phy_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	const struct of_device_id *match;
-	struct stih41x_usb_phy *phy_dev;
-	struct device *dev = &pdev->dev;
-	struct phy_provider *phy_provider;
-	struct phy *phy;
-
-	phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
-	if (!phy_dev)
-		return -ENOMEM;
-
-	match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev);
-	if (!match)
-		return -ENODEV;
-
-	phy_dev->cfg = match->data;
-
-	phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
-	if (IS_ERR(phy_dev->regmap)) {
-		dev_err(dev, "No syscfg phandle specified\n");
-		return PTR_ERR(phy_dev->regmap);
-	}
-
-	phy_dev->clk = devm_clk_get(dev, "osc_phy");
-	if (IS_ERR(phy_dev->clk)) {
-		dev_err(dev, "osc_phy clk not found\n");
-		return PTR_ERR(phy_dev->clk);
-	}
-
-	phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops);
-
-	if (IS_ERR(phy)) {
-		dev_err(dev, "failed to create phy\n");
-		return PTR_ERR(phy);
-	}
-
-	phy_dev->dev = dev;
-
-	phy_set_drvdata(phy, phy_dev);
-
-	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static const struct of_device_id stih41x_usb_phy_of_match[] = {
-	{ .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg },
-	{ .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match);
-
-static struct platform_driver stih41x_usb_phy_driver = {
-	.probe	= stih41x_usb_phy_probe,
-	.driver = {
-		.name	= "stih41x-usb-phy",
-		.of_match_table	= stih41x_usb_phy_of_match,
-	}
-};
-module_platform_driver(stih41x_usb_phy_driver);
-
-MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>");
-MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series");
-MODULE_LICENSE("GPL v2");

drivers/phy/phy-sun4i-usb.c

@@ -436,25 +436,31 @@ static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
 {
 	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+	int new_mode;
 
 	if (phy->index != 0)
 		return -EINVAL;
 
 	switch (mode) {
 	case PHY_MODE_USB_HOST:
-		data->dr_mode = USB_DR_MODE_HOST;
+		new_mode = USB_DR_MODE_HOST;
 		break;
 	case PHY_MODE_USB_DEVICE:
-		data->dr_mode = USB_DR_MODE_PERIPHERAL;
+		new_mode = USB_DR_MODE_PERIPHERAL;
 		break;
 	case PHY_MODE_USB_OTG:
-		data->dr_mode = USB_DR_MODE_OTG;
+		new_mode = USB_DR_MODE_OTG;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode);
+	if (new_mode != data->dr_mode) {
+		dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode);
+		data->dr_mode = new_mode;
+	}
+
+	data->id_det = -1; /* Force reprocessing of id */
 	data->force_session_end = true;
 	queue_delayed_work(system_wq, &data->detect, 0);
 

drivers/phy/phy-ti-pipe3.c

@@ -537,10 +537,7 @@ static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "pll_ctrl");
 	phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(phy->pll_ctrl_base))
-		return PTR_ERR(phy->pll_ctrl_base);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(phy->pll_ctrl_base);
 }
 
 static int ti_pipe3_probe(struct platform_device *pdev)
@@ -592,10 +589,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	ti_pipe3_power_off(generic_phy);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(phy_provider))
-		return PTR_ERR(phy_provider);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
 static int ti_pipe3_remove(struct platform_device *pdev)

drivers/phy/phy-twl4030-usb.c

@@ -317,6 +317,9 @@ static enum musb_vbus_id_status
 			linkstat = MUSB_VBUS_OFF;
 	}
 
+	kobject_uevent(&twl->dev->kobj, linkstat == MUSB_VBUS_VALID
+					? KOBJ_ONLINE : KOBJ_OFFLINE);
+
 	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
 			status, status, linkstat);
 

drivers/phy/tegra/xusb-tegra124.c

@@ -1483,7 +1483,6 @@ static int tegra124_usb3_port_enable(struct tegra_xusb_port *port)
 	struct tegra_xusb_padctl *padctl = port->padctl;
 	struct tegra_xusb_lane *lane = usb3->base.lane;
 	unsigned int index = port->index, offset;
-	int ret = 0;
 	u32 value;
 
 	value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
@@ -1612,7 +1611,7 @@ static int tegra124_usb3_port_enable(struct tegra_xusb_port *port)
 	value &= ~XUSB_PADCTL_ELPG_PROGRAM_SSPX_ELPG_CLAMP_EN(index);
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
 
-	return ret;
+	return 0;
 }
 
 static void tegra124_usb3_port_disable(struct tegra_xusb_port *port)

drivers/phy/tegra/xusb.c

@@ -561,10 +561,7 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
 	usb2->internal = of_property_read_bool(np, "nvidia,internal");
 
 	usb2->supply = devm_regulator_get(&port->dev, "vbus");
-	if (IS_ERR(usb2->supply))
-		return PTR_ERR(usb2->supply);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(usb2->supply);
 }
 
 static int tegra_xusb_add_usb2_port(struct tegra_xusb_padctl *padctl,
@@ -731,10 +728,7 @@ static int tegra_xusb_usb3_port_parse_dt(struct tegra_xusb_usb3_port *usb3)
 	usb3->internal = of_property_read_bool(np, "nvidia,internal");
 
 	usb3->supply = devm_regulator_get(&port->dev, "vbus");
-	if (IS_ERR(usb3->supply))
-		return PTR_ERR(usb3->supply);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(usb3->supply);
 }
 
 static int tegra_xusb_add_usb3_port(struct tegra_xusb_padctl *padctl,