Merge tag 'usb-serial-4.6-rc1' of...

Merge tag 'usb-serial-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v4.6-rc1

Here are some cp210x register-accessor updates and general usb-serial
code clean ups.
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/ch341.c

@@ -370,7 +370,7 @@ static void ch341_set_termios(struct tty_struct *tty,
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 {
 	const uint16_t ch341_break_reg =
-		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+			((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1;
 	struct usb_serial_port *port = tty->driver_data;
 	int r;
 	uint16_t reg_contents;

drivers/usb/serial/cp210x.c

@@ -326,113 +326,169 @@ struct cp210x_comm_status {
 #define PURGE_ALL		0x000f
 
 /*
- * cp210x_get_config
- * Reads from the CP210x configuration registers
- * 'size' is specified in bytes.
- * 'data' is a pointer to a pre-allocated array of integers large
- * enough to hold 'size' bytes (with 4 bytes to each integer)
+ * Reads a variable-sized block of CP210X_ registers, identified by req.
+ * Returns data into buf in native USB byte order.
  */
-static int cp210x_get_config(struct usb_serial_port *port, u8 request,
-		unsigned int *data, int size)
+static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	__le32 *buf;
-	int result, i, length;
-
-	/* Number of integers required to contain the array */
-	length = (((size - 1) | 3) + 1) / 4;
+	void *dmabuf;
+	int result;
 
-	buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
-	if (!buf)
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf) {
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		memset(buf, 0, bufsize);
 		return -ENOMEM;
+	}
 
-	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-				request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
-				USB_CTRL_GET_TIMEOUT);
-
-	/* Convert data into an array of integers */
-	for (i = 0; i < length; i++)
-		data[i] = le32_to_cpu(buf[i]);
+			req, REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, dmabuf, bufsize,
+			USB_CTRL_SET_TIMEOUT);
+	if (result == bufsize) {
+		memcpy(buf, dmabuf, bufsize);
+		result = 0;
+	} else {
+		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		if (result >= 0)
+			result = -EPROTO;
 
-	kfree(buf);
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		memset(buf, 0, bufsize);
+	}
 
-	if (result != size) {
-		dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n",
-			__func__, request, size, result);
-		if (result > 0)
-			result = -EPROTO;
+	kfree(dmabuf);
 
 	return result;
+}
+
+/*
+ * Reads any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
+{
+	__le32 le32_val;
+	int err;
+
+	err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
+	if (err) {
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		*val = 0;
+		return err;
 	}
 
+	*val = le32_to_cpu(le32_val);
+
+	return 0;
+}
+
+/*
+ * Reads any 16-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
+{
+	__le16 le16_val;
+	int err;
+
+	err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
+	if (err)
+		return err;
+
+	*val = le16_to_cpu(le16_val);
+
 	return 0;
 }
 
 /*
- * cp210x_set_config
- * Writes to the CP210x configuration registers
- * Values less than 16 bits wide are sent directly
- * 'size' is specified in bytes.
+ * Reads any 8-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
+{
+	return cp210x_read_reg_block(port, req, val, sizeof(*val));
+}
+
+/*
+ * Writes any 16-bit CP210X_ register (req) whose value is passed
+ * entirely in the wValue field of the USB request.
  */
-static int cp210x_set_config(struct usb_serial_port *port, u8 request,
-		unsigned int *data, int size)
+static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	__le32 *buf;
-	int result, i, length;
+	int result;
 
-	/* Number of integers required to contain the array */
-	length = (((size - 1) | 3) + 1) / 4;
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, val,
+			port_priv->bInterfaceNumber, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+	if (result < 0) {
+		dev_err(&port->dev, "failed set request 0x%x status: %d\n",
+				req, result);
+	}
 
-	buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
-	if (!buf)
+	return result;
+}
+
+/*
+ * Writes a variable-sized block of CP210X_ registers, identified by req.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	void *dmabuf;
+	int result;
+
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf)
 		return -ENOMEM;
 
-	/* Array of integers into bytes */
-	for (i = 0; i < length; i++)
-		buf[i] = cpu_to_le32(data[i]);
+	memcpy(dmabuf, buf, bufsize);
 
-	if (size > 2) {
-		result = usb_control_msg(serial->dev,
-				usb_sndctrlpipe(serial->dev, 0),
-				request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, 0,
+			port_priv->bInterfaceNumber, dmabuf, bufsize,
 			USB_CTRL_SET_TIMEOUT);
-	} else {
-		result = usb_control_msg(serial->dev,
-				usb_sndctrlpipe(serial->dev, 0),
-				request, REQTYPE_HOST_TO_INTERFACE, data[0],
-				port_priv->bInterfaceNumber, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-	}
 
-	kfree(buf);
+	kfree(dmabuf);
 
-	if ((size > 2 && result != size) || result < 0) {
-		dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n",
-			__func__, request, size, result);
-		if (result > 0)
+	if (result == bufsize) {
+		result = 0;
+	} else {
+		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		if (result >= 0)
 			result = -EPROTO;
-
-		return result;
 	}
 
-	return 0;
+	return result;
 }
 
 /*
- * cp210x_set_config_single
- * Convenience function for calling cp210x_set_config on single data values
- * without requiring an integer pointer
+ * Writes any 32-bit CP210X_ register identified by req.
  */
-static inline int cp210x_set_config_single(struct usb_serial_port *port,
-		u8 request, unsigned int data)
+static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
 {
-	return cp210x_set_config(port, request, &data, 2);
+	__le32 le32_val;
+
+	le32_val = cpu_to_le32(val);
+
+	return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
 }
 
 /*
@@ -444,47 +500,46 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
 static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
 {
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	unsigned int line_ctl_save;
-	unsigned int line_ctl_test;
+	u16 line_ctl_save;
+	u16 line_ctl_test;
 	int err;
 
-	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2);
+	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
 	if (err)
 		return err;
 
-	line_ctl_test = 0x800;
-	err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2);
+	err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
 	if (err)
 		return err;
 
-	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2);
+	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
 	if (err)
 		return err;
 
 	if (line_ctl_test == 8) {
 		port_priv->has_swapped_line_ctl = true;
-		line_ctl_save = swab16((u16)line_ctl_save);
+		line_ctl_save = swab16(line_ctl_save);
 	}
 
-	return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2);
+	return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
 }
 
 /*
- * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL)
+ * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
  * to workaround cp2108 bug and get correct value.
  */
-static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl)
+static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
 {
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	int err;
 
-	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2);
+	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
 	if (err)
 		return err;
 
 	/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
 	if (port_priv->has_swapped_line_ctl)
-		*ctl = swab16((u16)(*ctl));
+		*ctl = swab16(*ctl);
 
 	return 0;
 }
@@ -535,8 +590,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result;
 
-	result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
-								UART_ENABLE);
+	result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
 	if (result) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
 		return result;
@@ -554,15 +608,12 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void cp210x_close(struct usb_serial_port *port)
 {
-	unsigned int purge_ctl;
-
 	usb_serial_generic_close(port);
 
 	/* Clear both queues; cp2108 needs this to avoid an occasional hang */
-	purge_ctl = PURGE_ALL;
-	cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2);
+	cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
 
-	cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
+	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
 }
 
 /*
@@ -640,11 +691,12 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp)
 {
 	struct device *dev = &port->dev;
-	unsigned int cflag, modem_ctl[4];
-	unsigned int baud;
-	unsigned int bits;
+	unsigned int cflag;
+	u8 modem_ctl[16];
+	u32 baud;
+	u16 bits;
 
-	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
 
 	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
 	*baudp = baud;
@@ -675,14 +727,14 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	default:
 		dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	}
 
@@ -713,7 +765,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 		dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	}
 
@@ -725,7 +777,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	case BITS_STOP_1_5:
 		dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
 		bits &= ~BITS_STOP_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	case BITS_STOP_2:
 		dev_dbg(dev, "%s - stop bits = 2\n", __func__);
@@ -734,12 +786,13 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	default:
 		dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
 		bits &= ~BITS_STOP_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	}
 
-	cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
-	if (modem_ctl[0] & 0x0008) {
+	cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+			sizeof(modem_ctl));
+	if (modem_ctl[0] & 0x08) {
 		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
 		cflag |= CRTSCTS;
 	} else {
@@ -791,8 +844,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
 	baud = cp210x_quantise_baudrate(baud);
 
 	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
-	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
-							sizeof(baud))) {
+	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
 		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
 		if (old_termios)
 			baud = old_termios->c_ospeed;
@@ -808,8 +860,8 @@ static void cp210x_set_termios(struct tty_struct *tty,
 {
 	struct device *dev = &port->dev;
 	unsigned int cflag, old_cflag;
-	unsigned int bits;
-	unsigned int modem_ctl[4];
+	u16 bits;
+	u8 modem_ctl[16];
 
 	cflag = tty->termios.c_cflag;
 	old_cflag = old_termios->c_cflag;
@@ -847,7 +899,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 			bits |= BITS_DATA_8;
 			break;
 		}
-		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
 			dev_dbg(dev, "Number of data bits requested not supported by device\n");
 	}
 
@@ -874,7 +926,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 				}
 			}
 		}
-		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
 			dev_dbg(dev, "Parity mode not supported by device\n");
 	}
 
@@ -888,32 +940,40 @@ static void cp210x_set_termios(struct tty_struct *tty,
 			bits |= BITS_STOP_1;
 			dev_dbg(dev, "%s - stop bits = 1\n", __func__);
 		}
-		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
 			dev_dbg(dev, "Number of stop bits requested not supported by device\n");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
-		cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
-		dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
-			__func__, modem_ctl[0], modem_ctl[1],
-			modem_ctl[2], modem_ctl[3]);
+
+		/* Only bytes 0, 4 and 7 out of first 8 have functional bits */
+
+		cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+				sizeof(modem_ctl));
+		dev_dbg(dev, "%s - read modem controls = %02x .. .. .. %02x .. .. %02x\n",
+			__func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
 
 		if (cflag & CRTSCTS) {
 			modem_ctl[0] &= ~0x7B;
 			modem_ctl[0] |= 0x09;
-			modem_ctl[1] = 0x80;
+			modem_ctl[4] = 0x80;
+			/* FIXME - why clear reserved bits just read? */
+			modem_ctl[5] = 0;
+			modem_ctl[6] = 0;
+			modem_ctl[7] = 0;
 			dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
 		} else {
 			modem_ctl[0] &= ~0x7B;
 			modem_ctl[0] |= 0x01;
-			modem_ctl[1] |= 0x40;
+			/* FIXME - OR here instead of assignment looks wrong */
+			modem_ctl[4] |= 0x40;
 			dev_dbg(dev, "%s - flow control = NONE\n", __func__);
 		}
 
-		dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
-			__func__, modem_ctl[0], modem_ctl[1],
-			modem_ctl[2], modem_ctl[3]);
-		cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
+		dev_dbg(dev, "%s - write modem controls = %02x .. .. .. %02x .. .. %02x\n",
+			__func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
+		cp210x_write_reg_block(port, CP210X_SET_FLOW, modem_ctl,
+				sizeof(modem_ctl));
 	}
 
 }
@@ -928,7 +988,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
 static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int set, unsigned int clear)
 {
-	unsigned int control = 0;
+	u16 control = 0;
 
 	if (set & TIOCM_RTS) {
 		control |= CONTROL_RTS;
@@ -949,7 +1009,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
 
 	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
 
-	return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
+	return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
 }
 
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
@@ -963,10 +1023,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
 static int cp210x_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	unsigned int control;
+	u8 control;
 	int result;
 
-	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+	cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -983,7 +1043,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
 static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	unsigned int state;
+	u16 state;
 
 	if (break_state == 0)
 		state = BREAK_OFF;
@@ -991,7 +1051,7 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
 		state = BREAK_ON;
 	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 		state == BREAK_OFF ? "off" : "on");
-	cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
+	cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
 }
 
 static int cp210x_port_probe(struct usb_serial_port *port)

drivers/usb/serial/cyberjack.c

@@ -140,7 +140,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
-	int result = 0;
 
 	dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
@@ -152,7 +151,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 	priv->wrsent = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return result;
+	return 0;
 }
 
 static void cyberjack_close(struct usb_serial_port *port)

drivers/usb/serial/ftdi_sio.c

@@ -1320,11 +1320,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
-			if (((FTDI_NDI_HUC_PID == product_id) ||
-			     (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
-			     (FTDI_NDI_FUTURE_2_PID == product_id) ||
-			     (FTDI_NDI_FUTURE_3_PID == product_id) ||
-			     (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+			if (((product_id == FTDI_NDI_HUC_PID)		||
+			     (product_id == FTDI_NDI_SPECTRA_SCU_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_2_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_3_PID)	||
+			     (product_id == FTDI_NDI_AURORA_SCU_PID))	&&
 			    (baud == 19200)) {
 				baud = 1200000;
 			}

drivers/usb/serial/ftdi_sio.h

@@ -239,11 +239,11 @@ enum ftdi_sio_baudrate {
  */
 
 #define FTDI_SIO_SET_DTR_MASK 0x1
-#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK  << 8))
-#define FTDI_SIO_SET_DTR_LOW  (0 | (FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK  << 8) | 1)
+#define FTDI_SIO_SET_DTR_LOW  ((FTDI_SIO_SET_DTR_MASK  << 8) | 0)
 #define FTDI_SIO_SET_RTS_MASK 0x2
-#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
-#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
+#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2)
+#define FTDI_SIO_SET_RTS_LOW  ((FTDI_SIO_SET_RTS_MASK << 8) | 0)
 
 /*
  * ControlValue

drivers/usb/serial/garmin_gps.c

@@ -237,10 +237,10 @@ static inline int getDataLength(const __u8 *usbPacket)
  */
 static inline int isAbortTrfCmnd(const unsigned char *buf)
 {
-	if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
-					sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
-	    0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
-					sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
+	if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+			sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 ||
+	    memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+			sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0)
 		return 1;
 	else
 		return 0;
@@ -350,7 +350,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 	unsigned  l = 0;
 
 	dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
-		0xFF & pkt_id);
+			pkt_id);
 
 	*ptr++ = DLE;
 	*ptr++ = ACK;
@@ -366,7 +366,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 		*ptr++ = DLE;
 
 	*ptr++ = 0;
-	*ptr++ = 0xFF & (-cksum);
+	*ptr++ = (-cksum) & 0xFF;
 	*ptr++ = DLE;
 	*ptr++ = ETX;
 
@@ -423,9 +423,9 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
 		n++;
 	}
 
-	if ((0xff & (cksum + *recpkt)) != 0) {
+	if (((cksum + *recpkt) & 0xff) != 0) {
 		dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
-			__func__, 0xff & -cksum, 0xff & *recpkt);
+			__func__, -cksum & 0xff, *recpkt);
 		return -EINVPKT;
 	}
 
@@ -528,7 +528,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 					dev_dbg(dev, "NAK packet complete.\n");
 				} else {
 					dev_dbg(dev, "packet complete - id=0x%X.\n",
-						0xFF & data);
+							data);
 					gsp_rec_packet(garmin_data_p, size);
 				}
 
@@ -636,7 +636,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 
 	garmin_data_p->outsize = 0;
 
-	if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
+	if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) {
 		dev_dbg(dev, "not an application packet (%d)\n",
 				getLayerId(garmin_data_p->outbuffer));
 		return -1;
@@ -688,7 +688,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 			*dst++ = DLE;
 	}
 
-	cksum = 0xFF & -cksum;
+	cksum = -cksum & 0xFF;
 	*dst++ = cksum;
 	if (cksum == DLE)
 		*dst++ = DLE;
@@ -860,7 +860,6 @@ static int process_resetdev_request(struct usb_serial_port *port)
 static int garmin_clear(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
-	int status = 0;
 
 	/* flush all queued data */
 	pkt_clear(garmin_data_p);
@@ -870,7 +869,7 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
 	garmin_data_p->outsize = 0;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	return status;
+	return 0;
 }
 
 
@@ -970,7 +969,7 @@ static void garmin_write_bulk_callback(struct urb *urb)
 		struct garmin_data *garmin_data_p =
 					usb_get_serial_port_data(port);
 
-		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
+		if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) {
 
 			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
 				gsp_send_ack(garmin_data_p,
@@ -1025,7 +1024,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 				dismiss_ack ? NULL : port);
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
-	if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
+	if (getLayerId(buffer) == GARMIN_LAYERID_APPL) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= APP_REQ_SEEN;
@@ -1077,9 +1076,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 		pktsiz = getDataLength(garmin_data_p->privpkt);
 		pktid  = getPacketId(garmin_data_p->privpkt);
 
-		if (count == (GARMIN_PKTHDR_LENGTH+pktsiz)
-		    && GARMIN_LAYERID_PRIVATE ==
-				getLayerId(garmin_data_p->privpkt)) {
+		if (count == (GARMIN_PKTHDR_LENGTH + pktsiz) &&
+				getLayerId(garmin_data_p->privpkt) ==
+						GARMIN_LAYERID_PRIVATE) {
 
 			dev_dbg(dev, "%s - processing private request %d\n",
 				__func__, pktid);
@@ -1192,7 +1191,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
 	garmin_read_process(garmin_data_p, data, urb->actual_length, 1);
 
 	if (urb->actual_length == 0 &&
-			0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) {
+			(garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) {
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
 		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
@@ -1203,7 +1202,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
 				__func__, retval);
 	} else if (urb->actual_length > 0) {
 		/* Continue trying to read until nothing more is received  */
-		if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
+		if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (retval)
 				dev_err(&port->dev,
@@ -1249,12 +1248,12 @@ static void garmin_read_int_callback(struct urb *urb)
 			      urb->transfer_buffer);
 
 	if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
-	    0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
-				sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
+		memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
+				sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) {
 
 		dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
 
-		if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+		if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) {
 
 			/* bulk data available */
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
@@ -1276,8 +1275,8 @@ static void garmin_read_int_callback(struct urb *urb)
 		}
 
 	} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
-			 && 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
-					sizeof(GARMIN_START_SESSION_REPLY))) {
+			 && memcmp(data, GARMIN_START_SESSION_REPLY,
+				 sizeof(GARMIN_START_SESSION_REPLY)) == 0) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
@@ -1356,7 +1355,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
 	if (garmin_data_p->mode == MODE_NATIVE)
 		garmin_flush_queue(garmin_data_p);
 
-	if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+	if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) {
 		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&port->dev,

drivers/usb/serial/iuu_phoenix.c

@@ -360,7 +360,7 @@ static void iuu_led_activity_on(struct urb *urb)
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
 	*buf_ptr++ = IUU_SET_LED;
-	if (xmas == 1) {
+	if (xmas) {
 		get_random_bytes(buf_ptr, 6);
 		*(buf_ptr+7) = 1;
 	} else {
@@ -380,7 +380,7 @@ static void iuu_led_activity_off(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	if (xmas == 1) {
+	if (xmas) {
 		iuu_rxcmd(urb);
 		return;
 	} else {

drivers/usb/serial/keyspan.c

@@ -1963,7 +1963,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	if (d_details->product_id == keyspan_usa49wg_product_id) {
 		dr = (void *)(s_priv->ctrl_buf);
 		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
-		dr->bRequest = 0xB0;	/* 49wg control message */;
+		dr->bRequest = 0xB0;	/* 49wg control message */
 		dr->wValue = 0;
 		dr->wIndex = 0;
 		dr->wLength = cpu_to_le16(sizeof(msg));

drivers/usb/serial/kl5kusb105.c

@@ -472,7 +472,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		/* maybe this should be simulated by sending read
 		 * disable and read enable messages?
 		 */
-		;
 #if 0
 		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		mct_u232_set_modem_ctrl(serial, priv->control_state);
@@ -527,7 +526,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 
 		mct_u232_set_line_ctrl(serial, priv->last_lcr);
 #endif
-		;
 	}
 	/*
 	 * Set flow control: well, I do not really now how to handle DTR/RTS.
@@ -546,7 +544,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		mct_u232_set_modem_ctrl(serial, priv->control_state);
 #endif
-		;
 	}
 	memcpy(cfg, &priv->cfg, sizeof(*cfg));
 	spin_unlock_irqrestore(&priv->lock, flags);

drivers/usb/serial/mos7840.c

@@ -1842,7 +1842,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	Data = 0x0c;
 	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
-	if (mos7840_port->read_urb_busy == false) {
+	if (!mos7840_port->read_urb_busy) {
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
@@ -1906,7 +1906,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	if (mos7840_port->read_urb_busy == false) {
+	if (!mos7840_port->read_urb_busy) {
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {

drivers/usb/serial/quatech2.c

@@ -973,7 +973,7 @@ static int qt2_write(struct tty_struct *tty,
 
 	data = write_urb->transfer_buffer;
 	spin_lock_irqsave(&port_priv->urb_lock, flags);
-	if (port_priv->urb_in_use == true) {
+	if (port_priv->urb_in_use) {
 		dev_err(&port->dev, "qt2_write - urb is in use\n");
 		goto write_out;
 	}

drivers/usb/serial/safe_serial.c

@@ -76,13 +76,8 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-
-#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
-#define CONFIG_USB_SERIAL_SAFE_PADDED 0
-#endif
-
-static bool safe = 1;
-static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED;
+static bool safe = true;
+static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED);
 
 #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
@@ -278,7 +273,7 @@ static int safe_startup(struct usb_serial *serial)
 	case LINEO_SAFESERIAL_CRC:
 		break;
 	case LINEO_SAFESERIAL_CRC_PADDED:
-		padded = 1;
+		padded = true;
 		break;
 	default:
 		return -EINVAL;