Merge branch 'phy-internal'

Florian Fainelli says:

====================
net: phy: Support "internal" PHY interface

This makes the "internal" phy-mode property generally available and
documented and this allows us to remove some custom parsing code
we had for bcmgenet and bcm_sf2 which both used that specific value.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/ethernet.txt

@@ -11,6 +11,7 @@ The following properties are common to the Ethernet controllers:
   the maximum frame size (there's contradiction in ePAPR).
 - phy-mode: string, operation mode of the PHY interface. This is now a de-facto
   standard property; supported values are:
+  * "internal"
   * "mii"
   * "gmii"
   * "sgmii"

drivers/net/dsa/bcm_sf2.c

@@ -498,10 +498,8 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
 				   struct device_node *dn)
 {
 	struct device_node *port;
-	const char *phy_mode_str;
 	int mode;
 	unsigned int port_num;
-	int ret;
 
 	priv->moca_port = -1;
 
@@ -515,15 +513,11 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
 		 * time
 		 */
 		mode = of_get_phy_mode(port);
-		if (mode < 0) {
-			ret = of_property_read_string(port, "phy-mode",
-						      &phy_mode_str);
-			if (ret < 0)
+		if (mode < 0)
 			continue;
 
-			if (!strcasecmp(phy_mode_str, "internal"))
+		if (mode == PHY_INTERFACE_MODE_INTERNAL)
 			priv->int_phy_mask |= 1 << port_num;
-		}
 
 		if (mode == PHY_INTERFACE_MODE_MOCA)
 			priv->moca_port = port_num;

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -251,11 +251,8 @@ int bcmgenet_mii_config(struct net_device *dev)
 	priv->ext_phy = !priv->internal_phy &&
 			(priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
 
-	if (priv->internal_phy)
-		priv->phy_interface = PHY_INTERFACE_MODE_NA;
-
 	switch (priv->phy_interface) {
-	case PHY_INTERFACE_MODE_NA:
+	case PHY_INTERFACE_MODE_INTERNAL:
 	case PHY_INTERFACE_MODE_MOCA:
 		/* Irrespective of the actually configured PHY speed (100 or
 		 * 1000) GENETv4 only has an internal GPHY so we will just end
@@ -471,7 +468,6 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 {
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct device *kdev = &priv->pdev->dev;
-	const char *phy_mode_str = NULL;
 	struct phy_device *phydev = NULL;
 	char *compat;
 	int phy_mode;
@@ -510,23 +506,19 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 
 	/* Get the link mode */
 	phy_mode = of_get_phy_mode(dn);
+	if (phy_mode < 0) {
+		dev_err(kdev, "invalid PHY mode property\n");
+		return phy_mode;
+	}
+
 	priv->phy_interface = phy_mode;
 
 	/* We need to specifically look up whether this PHY interface is internal
 	 * or not *before* we even try to probe the PHY driver over MDIO as we
 	 * may have shut down the internal PHY for power saving purposes.
 	 */
-	if (phy_mode < 0) {
-		ret = of_property_read_string(dn, "phy-mode", &phy_mode_str);
-		if (ret < 0) {
-			dev_err(kdev, "invalid PHY mode property\n");
-			return ret;
-		}
-
-		priv->phy_interface = PHY_INTERFACE_MODE_NA;
-		if (!strcasecmp(phy_mode_str, "internal"))
+	if (priv->phy_interface == PHY_INTERFACE_MODE_INTERNAL)
 		priv->internal_phy = true;
-	}
 
 	/* Make sure we initialize MoCA PHYs with a link down */
 	if (phy_mode == PHY_INTERFACE_MODE_MOCA) {

include/linux/phy.h

@@ -64,6 +64,7 @@
 /* Interface Mode definitions */
 typedef enum {
 	PHY_INTERFACE_MODE_NA,
+	PHY_INTERFACE_MODE_INTERNAL,
 	PHY_INTERFACE_MODE_MII,
 	PHY_INTERFACE_MODE_GMII,
 	PHY_INTERFACE_MODE_SGMII,
@@ -114,6 +115,8 @@ static inline const char *phy_modes(phy_interface_t interface)
 	switch (interface) {
 	case PHY_INTERFACE_MODE_NA:
 		return "";
+	case PHY_INTERFACE_MODE_INTERNAL:
+		return "internal";
 	case PHY_INTERFACE_MODE_MII:
 		return "mii";
 	case PHY_INTERFACE_MODE_GMII: