Staging: add et131x network driver

This is a driver for the ET1310 network device.

Based on the driver found at https://sourceforge.net/projects/et131x/

Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph
Hellwig <hch@infradead.org>

Note, the powermanagement options were removed from the vendor provided
driver as they did not build properly at the time.

TODO:
	- kernel coding style cleanups
	- forward port for latest network driver changes
	- kill useless typecasts (e.g. in et1310_phy.c)
	- alloc_etherdev is initializing memory with zero?!?
	- add_timer call in et131x_netdev.c is correct?
	- Add power saving functionality (suspend, sleep, resume)
	- Implement a few more kernel Parameter (set mac )

Cc: Olaf Hartmann <o.hartmann@telovital.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dean Adams <dadams1969@gmail.com>
Cc: Victor Soriano <vjsoriano@agere.com>
Cc: Andre-Sebastian Liebe <andre@lianse.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -23,5 +23,6 @@ menuconfig STAGING
 
 if STAGING
 
+source "drivers/staging/et131x/Kconfig"
 
 endif # STAGING

drivers/staging/Makefile

 # Makefile for staging directory
 
+obj-$(CONFIG_ET131X)		+= et131x/

drivers/staging/et131x/Kconfig

+config ET131X
+	tristate "Agere ET-1310 Gigabit Ethernet support"
+	depends on NETDEV_1000 && PCI
+	default n
+	---help---
+	  This driver supports Agere ET-1310 ethernet adapters.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called et131x.
+
+config ET131X_DEBUG
+	bool "Enable et131x debugging"
+	depends on ET131X
+	default n
+	---help---
+	  Say Y for detailed debug information.
+
+	  If in doubt, say N.

drivers/staging/et131x/Makefile

+#
+# Makefile for the Agere ET-131x ethernet driver
+#
+
+obj-$(CONFIG_ET131X) += et131x.o
+
+et131x-objs :=	et1310_eeprom.o \
+		et1310_jagcore.o \
+		et1310_mac.o \
+		et1310_phy.o \
+		et1310_pm.o \
+		et1310_rx.o \
+		et1310_tx.o \
+		et131x_config.o \
+		et131x_debug.o \
+		et131x_initpci.o \
+		et131x_isr.o \
+		et131x_netdev.o

drivers/staging/et131x/README

+This is a driver for the ET1310 network device.
+
+Based on the driver found at https://sourceforge.net/projects/et131x/
+
+Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph
+Hellwig <hch@infradead.org>
+
+Note, the powermanagement options were removed from the vendor provided
+driver as they did not build properly at the time.
+
+TODO:
+	- kernel coding style cleanups
+	- forward port for latest network driver changes
+	- kill useless typecasts (e.g. in et1310_phy.c)
+	- alloc_etherdev is initializing memory with zero?!?
+	- add_timer call in et131x_netdev.c is correct?
+	- Add power saving functionality (suspend, sleep, resume)
+	- Implement a few more kernel Parameter (set mac )
+
+Please send patches to:
+	Greg Kroah-Hartman <gregkh@suse.de>
+
+And Cc: Olaf Hartmann <o.hartmann@telovital.com> as he has this device and can
+test any changes.
+

drivers/staging/et131x/et1310_address_map.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_address_map.h - Contains the register mapping for the ET1310
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_ADDRESS_MAP_H_
+#define _ET1310_ADDRESS_MAP_H_
+
+
+/* START OF GLOBAL REGISTER ADDRESS MAP */
+
+typedef union _Q_ADDR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:22;	// bits 10-31
+		u32 addr:10;	// bits 0-9
+#else
+		u32 addr:10;	// bits 0-9
+		u32 unused:22;	// bits 10-31
+#endif
+	} bits;
+} Q_ADDR_t, *PQ_ADDR_t;
+
+/*
+ * structure for tx queue start address reg in global address map
+ * located at address 0x0000
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for tx queue end address reg in global address map
+ * located at address 0x0004
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for rx queue start address reg in global address map
+ * located at address 0x0008
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for rx queue end address reg in global address map
+ * located at address 0x000C
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for power management control status reg in global address map
+ * located at address 0x0010
+ */
+typedef union _PM_CSR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:22;		// bits 10-31
+		u32 pm_jagcore_rx_rdy:1;	// bit 9
+		u32 pm_jagcore_tx_rdy:1;	// bit 8
+		u32 pm_phy_lped_en:1;	// bit 7
+		u32 pm_phy_sw_coma:1;	// bit 6
+		u32 pm_rxclk_gate:1;	// bit 5
+		u32 pm_txclk_gate:1;	// bit 4
+		u32 pm_sysclk_gate:1;	// bit 3
+		u32 pm_jagcore_rx_en:1;	// bit 2
+		u32 pm_jagcore_tx_en:1;	// bit 1
+		u32 pm_gigephy_en:1;	// bit 0
+#else
+		u32 pm_gigephy_en:1;	// bit 0
+		u32 pm_jagcore_tx_en:1;	// bit 1
+		u32 pm_jagcore_rx_en:1;	// bit 2
+		u32 pm_sysclk_gate:1;	// bit 3
+		u32 pm_txclk_gate:1;	// bit 4
+		u32 pm_rxclk_gate:1;	// bit 5
+		u32 pm_phy_sw_coma:1;	// bit 6
+		u32 pm_phy_lped_en:1;	// bit 7
+		u32 pm_jagcore_tx_rdy:1;	// bit 8
+		u32 pm_jagcore_rx_rdy:1;	// bit 9
+		u32 unused:22;		// bits 10-31
+#endif
+	} bits;
+} PM_CSR_t, *PPM_CSR_t;
+
+/*
+ * structure for interrupt status reg in global address map
+ * located at address 0x0018
+ */
+typedef union _INTERRUPT_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused5:11;			// bits 21-31
+		u32 slv_timeout:1;			// bit 20
+		u32 mac_stat_interrupt:1;		// bit 19
+		u32 rxmac_interrupt:1;		// bit 18
+		u32 txmac_interrupt:1;		// bit 17
+		u32 phy_interrupt:1;		// bit 16
+		u32 wake_on_lan:1;			// bit 15
+		u32 watchdog_interrupt:1;		// bit 14
+		u32 unused4:4;			// bits 10-13
+		u32 rxdma_err:1;			// bit 9
+		u32 rxdma_pkt_stat_ring_low:1;	// bit 8
+		u32 rxdma_fb_ring1_low:1;		// bit 7
+		u32 rxdma_fb_ring0_low:1;		// bit 6
+		u32 rxdma_xfr_done:1;		// bit 5
+		u32 txdma_err:1;			// bit 4
+		u32 txdma_isr:1;			// bit 3
+		u32 unused3:1;			// bit 2
+		u32 unused2:1;			// bit 1
+		u32 unused1:1;			// bit 0
+#else
+		u32 unused1:1;			// bit 0
+		u32 unused2:1;			// bit 1
+		u32 unused3:1;			// bit 2
+		u32 txdma_isr:1;			// bit 3
+		u32 txdma_err:1;			// bit 4
+		u32 rxdma_xfr_done:1;		// bit 5
+		u32 rxdma_fb_ring0_low:1;		// bit 6
+		u32 rxdma_fb_ring1_low:1;		// bit 7
+		u32 rxdma_pkt_stat_ring_low:1;	// bit 8
+		u32 rxdma_err:1;			// bit 9
+		u32 unused4:4;			// bits 10-13
+		u32 watchdog_interrupt:1;		// bit 14
+		u32 wake_on_lan:1;			// bit 15
+		u32 phy_interrupt:1;		// bit 16
+		u32 txmac_interrupt:1;		// bit 17
+		u32 rxmac_interrupt:1;		// bit 18
+		u32 mac_stat_interrupt:1;		// bit 19
+		u32 slv_timeout:1;			// bit 20
+		u32 unused5:11;			// bits 21-31
+#endif
+	} bits;
+} INTERRUPT_t, *PINTERRUPT_t;
+
+/*
+ * structure for interrupt mask reg in global address map
+ * located at address 0x001C
+ * Defined earlier (INTERRUPT_t), but 'watchdog_interrupt' is not used.
+ */
+
+/*
+ * structure for interrupt alias clear mask reg in global address map
+ * located at address 0x0020
+ * Defined earlier (INTERRUPT_t)
+ */
+
+/*
+ * structure for interrupt status alias reg in global address map
+ * located at address 0x0024
+ * Defined earlier (INTERRUPT_t)
+ */
+
+/*
+ * structure for software reset reg in global address map
+ * located at address 0x0028
+ */
+typedef union _SW_RESET_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 selfclr_disable:1;	// bit 31
+		u32 unused:24;		// bits 7-30
+		u32 mmc_sw_reset:1;	// bit 6
+		u32 mac_stat_sw_reset:1;	// bit 5
+		u32 mac_sw_reset:1;	// bit 4
+		u32 rxmac_sw_reset:1;	// bit 3
+		u32 txmac_sw_reset:1;	// bit 2
+		u32 rxdma_sw_reset:1;	// bit 1
+		u32 txdma_sw_reset:1;	// bit 0
+#else
+		u32 txdma_sw_reset:1;	// bit 0
+		u32 rxdma_sw_reset:1;	// bit 1
+		u32 txmac_sw_reset:1;	// bit 2
+		u32 rxmac_sw_reset:1;	// bit 3
+		u32 mac_sw_reset:1;	// bit 4
+		u32 mac_stat_sw_reset:1;	// bit 5
+		u32 mmc_sw_reset:1;	// bit 6
+		u32 unused:24;		// bits 7-30
+		u32 selfclr_disable:1;	// bit 31
+#endif
+	} bits;
+} SW_RESET_t, *PSW_RESET_t;
+
+/*
+ * structure for SLV Timer reg in global address map
+ * located at address 0x002C
+ */
+typedef union _SLV_TIMER_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:8;	// bits 24-31
+		u32 timer_ini:24;	// bits 0-23
+#else
+		u32 timer_ini:24;	// bits 0-23
+		u32 unused:8;	// bits 24-31
+#endif
+	} bits;
+} SLV_TIMER_t, *PSLV_TIMER_t;
+
+/*
+ * structure for MSI Configuration reg in global address map
+ * located at address 0x0030
+ */
+typedef union _MSI_CONFIG_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused1:13;	// bits 19-31
+		u32 msi_tc:3;	// bits 16-18
+		u32 unused2:11;	// bits 5-15
+		u32 msi_vector:5;	// bits 0-4
+#else
+		u32 msi_vector:5;	// bits 0-4
+		u32 unused2:11;	// bits 5-15
+		u32 msi_tc:3;	// bits 16-18
+		u32 unused1:13;	// bits 19-31
+#endif
+	} bits;
+} MSI_CONFIG_t, *PMSI_CONFIG_t;
+
+/*
+ * structure for Loopback reg in global address map
+ * located at address 0x0034
+ */
+typedef union _LOOPBACK_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:30;		// bits 2-31
+		u32 dma_loopback:1;	// bit 1
+		u32 mac_loopback:1;	// bit 0
+#else
+		u32 mac_loopback:1;	// bit 0
+		u32 dma_loopback:1;	// bit 1
+		u32 unused:30;		// bits 2-31
+#endif
+	} bits;
+} LOOPBACK_t, *PLOOPBACK_t;
+
+/*
+ * GLOBAL Module of JAGCore Address Mapping
+ * Located at address 0x0000
+ */
+typedef struct _GLOBAL_t {			// Location:
+	Q_ADDR_t txq_start_addr;		//  0x0000
+	Q_ADDR_t txq_end_addr;			//  0x0004
+	Q_ADDR_t rxq_start_addr;		//  0x0008
+	Q_ADDR_t rxq_end_addr;			//  0x000C
+	PM_CSR_t pm_csr;			//  0x0010
+	u32 unused;				//  0x0014
+	INTERRUPT_t int_status;			//  0x0018
+	INTERRUPT_t int_mask;			//  0x001C
+	INTERRUPT_t int_alias_clr_en;		//  0x0020
+	INTERRUPT_t int_status_alias;		//  0x0024
+	SW_RESET_t sw_reset;			//  0x0028
+	SLV_TIMER_t slv_timer;			//  0x002C
+	MSI_CONFIG_t msi_config;		//  0x0030
+	LOOPBACK_t loopback;			//  0x0034
+	u32 watchdog_timer;			//  0x0038
+} GLOBAL_t, *PGLOBAL_t;
+
+/* END OF GLOBAL REGISTER ADDRESS MAP */
+
+
+/* START OF TXDMA REGISTER ADDRESS MAP */
+
+/*
+ * structure for txdma control status reg in txdma address map
+ * located at address 0x1000
+ */
+typedef union _TXDMA_CSR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused2:19;		// bits 13-31
+		u32 traffic_class:4;	// bits 9-12
+		u32 sngl_epkt_mode:1;	// bit 8
+		u32 cache_thrshld:4;	// bits 4-7
+		u32 unused1:2;		// bits 2-3
+		u32 drop_TLP_disable:1;	// bit 1
+		u32 halt:1;		// bit 0
+#else
+		u32 halt:1;		// bit 0
+		u32 drop_TLP_disable:1;	// bit 1
+		u32 unused1:2;		// bits 2-3
+		u32 cache_thrshld:4;	// bits 4-7
+		u32 sngl_epkt_mode:1;	// bit 8
+		u32 traffic_class:4;	// bits 9-12
+		u32 unused2:19;		// bits 13-31
+#endif
+	} bits;
+} TXDMA_CSR_t, *PTXDMA_CSR_t;
+
+/*
+ * structure for txdma packet ring base address hi reg in txdma address map
+ * located at address 0x1004
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma packet ring base address low reg in txdma address map
+ * located at address 0x1008
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma packet ring number of descriptor reg in txdma address
+ * map.  Located at address 0x100C
+ */
+typedef union _TXDMA_PR_NUM_DES_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:22;	// bits 10-31
+		u32 pr_ndes:10;	// bits 0-9
+#else
+		u32 pr_ndes:10;	// bits 0-9
+		u32 unused:22;	// bits 10-31
+#endif
+	} bits;
+} TXDMA_PR_NUM_DES_t, *PTXDMA_PR_NUM_DES_t;
+
+
+typedef union _DMA10W_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:21;	// bits 11-31
+		u32 wrap:1;	// bit 10
+		u32 val:10;	// bits 0-9
+#else
+		u32 val:10;	// bits 0-9
+		u32 wrap:1;	// bit 10
+		u32 unused:21;	// bits 11-31
+#endif
+	} bits;
+} DMA10W_t, *PDMA10W_t;
+
+/*
+ * structure for txdma tx queue write address reg in txdma address map
+ * located at address 0x1010
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma tx queue write address external reg in txdma address map
+ * located at address 0x1014
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma tx queue read address reg in txdma address map
+ * located at address 0x1018
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma status writeback address hi reg in txdma address map
+ * located at address 0x101C
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma status writeback address lo reg in txdma address map
+ * located at address 0x1020
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma service request reg in txdma address map
+ * located at address 0x1024
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma service complete reg in txdma address map
+ * located at address 0x1028
+ * Defined earlier (DMA10W_t)
+ */
+
+typedef union _DMA4W_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:27;	// bits 5-31
+		u32 wrap:1;	// bit 4
+		u32 val:4;		// bit 0-3
+#else
+		u32 val:4;		// bits 0-3
+		u32 wrap:1;	// bit 4
+		u32 unused:27;	// bits 5-31
+#endif
+	} bits;
+} DMA4W_t, *PDMA4W_t;
+
+/*
+ * structure for txdma tx descriptor cache read index reg in txdma address map
+ * located at address 0x102C
+ * Defined earlier (DMA4W_t)
+ */
+
+/*
+ * structure for txdma tx descriptor cache write index reg in txdma address map
+ * located at address 0x1030
+ * Defined earlier (DMA4W_t)
+ */
+
+/*
+ * structure for txdma error reg in txdma address map
+ * located at address 0x1034
+ */
+typedef union _TXDMA_ERROR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused3:22;		// bits 10-31
+		u32 WrbkRewind:1;	// bit 9
+		u32 WrbkResend:1;	// bit 8
+		u32 unused2:2;		// bits 6-7
+		u32 DescrRewind:1;	// bit 5
+		u32 DescrResend:1;	// bit 4
+		u32 unused1:2;		// bits 2-3
+		u32 PyldRewind:1;	// bit 1
+		u32 PyldResend:1;	// bit 0
+#else
+		u32 PyldResend:1;	// bit 0
+		u32 PyldRewind:1;	// bit 1
+		u32 unused1:2;		// bits 2-3
+		u32 DescrResend:1;	// bit 4
+		u32 DescrRewind:1;	// bit 5
+		u32 unused2:2;		// bits 6-7
+		u32 WrbkResend:1;	// bit 8
+		u32 WrbkRewind:1;	// bit 9
+		u32 unused3:22;		// bits 10-31
+#endif
+	} bits;
+} TXDMA_ERROR_t, *PTXDMA_ERROR_t;
+
+/*
+ * Tx DMA Module of JAGCore Address Mapping
+ * Located at address 0x1000
+ */
+typedef struct _TXDMA_t {		// Location:
+	TXDMA_CSR_t csr;		//  0x1000
+	u32 pr_base_hi;			//  0x1004
+	u32 pr_base_lo;			//  0x1008
+	TXDMA_PR_NUM_DES_t pr_num_des;	//  0x100C
+	DMA10W_t txq_wr_addr;		//  0x1010
+	DMA10W_t txq_wr_addr_ext;	//  0x1014
+	DMA10W_t txq_rd_addr;		//  0x1018
+	u32 dma_wb_base_hi;		//  0x101C
+	u32 dma_wb_base_lo;		//  0x1020
+	DMA10W_t service_request;	//  0x1024
+	DMA10W_t service_complete;	//  0x1028
+	DMA4W_t cache_rd_index;		//  0x102C
+	DMA4W_t cache_wr_index;		//  0x1030
+	TXDMA_ERROR_t TxDmaError;	//  0x1034
+	u32 DescAbortCount;		//  0x1038
+	u32 PayloadAbortCnt;		//  0x103c
+	u32 WriteBackAbortCnt;		//  0x1040
+	u32 DescTimeoutCnt;		//  0x1044
+	u32 PayloadTimeoutCnt;		//  0x1048
+	u32 WriteBackTimeoutCnt;	//  0x104c
+	u32 DescErrorCount;		//  0x1050
+	u32 PayloadErrorCnt;		//  0x1054
+	u32 WriteBackErrorCnt;		//  0x1058
+	u32 DroppedTLPCount;		//  0x105c
+	DMA10W_t NewServiceComplete;	//  0x1060
+	u32 EthernetPacketCount;	//  0x1064
+} TXDMA_t, *PTXDMA_t;
+
+/* END OF TXDMA REGISTER ADDRESS MAP */
+
+
+/* START OF RXDMA REGISTER ADDRESS MAP */
+
+/*
+ * structure for control status reg in rxdma address map
+ * Located at address 0x2000
+ */
+typedef union _RXDMA_CSR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused2:14;		// bits 18-31
+		u32 halt_status:1;	// bit 17
+		u32 pkt_done_flush:1;	// bit 16
+		u32 pkt_drop_disable:1;	// bit 15
+		u32 unused1:1;		// bit 14
+		u32 fbr1_enable:1;	// bit 13
+		u32 fbr1_size:2;	// bits 11-12
+		u32 fbr0_enable:1;	// bit 10
+		u32 fbr0_size:2;	// bits 8-9
+		u32 dma_big_endian:1;	// bit 7
+		u32 pkt_big_endian:1;	// bit 6
+		u32 psr_big_endian:1;	// bit 5
+		u32 fbr_big_endian:1;	// bit 4
+		u32 tc:3;		// bits 1-3
+		u32 halt:1;		// bit 0
+#else
+		u32 halt:1;		// bit 0
+		u32 tc:3;		// bits 1-3
+		u32 fbr_big_endian:1;	// bit 4
+		u32 psr_big_endian:1;	// bit 5
+		u32 pkt_big_endian:1;	// bit 6
+		u32 dma_big_endian:1;	// bit 7
+		u32 fbr0_size:2;	// bits 8-9
+		u32 fbr0_enable:1;	// bit 10
+		u32 fbr1_size:2;	// bits 11-12
+		u32 fbr1_enable:1;	// bit 13
+		u32 unused1:1;		// bit 14
+		u32 pkt_drop_disable:1;	// bit 15
+		u32 pkt_done_flush:1;	// bit 16
+		u32 halt_status:1;	// bit 17
+		u32 unused2:14;		// bits 18-31
+#endif
+	} bits;
+} RXDMA_CSR_t, *PRXDMA_CSR_t;
+
+/*
+ * structure for dma writeback lo reg in rxdma address map
+ * located at address 0x2004
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for dma writeback hi reg in rxdma address map
+ * located at address 0x2008
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for number of packets done reg in rxdma address map
+ * located at address 0x200C
+ */
+typedef union _RXDMA_NUM_PKT_DONE_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:24;	// bits 8-31
+		u32 num_done:8;	// bits 0-7
+#else
+		u32 num_done:8;	// bits 0-7
+		u32 unused:24;	// bits 8-31
+#endif
+	} bits;
+} RXDMA_NUM_PKT_DONE_t, *PRXDMA_NUM_PKT_DONE_t;
+
+/*
+ * structure for max packet time reg in rxdma address map
+ * located at address 0x2010
+ */
+typedef union _RXDMA_MAX_PKT_TIME_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:14;		// bits 18-31
+		u32 time_done:18;	// bits 0-17
+#else
+		u32 time_done:18;	// bits 0-17
+		u32 unused:14;		// bits 18-31
+#endif
+	} bits;
+} RXDMA_MAX_PKT_TIME_t, *PRXDMA_MAX_PKT_TIME_t;
+
+/*
+ * structure for rx queue read address reg in rxdma address map
+ * located at address 0x2014
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for rx queue read address external reg in rxdma address map
+ * located at address 0x2018
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for rx queue write address reg in rxdma address map
+ * located at address 0x201C
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for packet status ring base address lo reg in rxdma address map
+ * located at address 0x2020
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for packet status ring base address hi reg in rxdma address map
+ * located at address 0x2024
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for packet status ring number of descriptors reg in rxdma address
+ * map.  Located at address 0x2028
+ */
+typedef union _RXDMA_PSR_NUM_DES_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:20;		// bits 12-31
+		u32 psr_ndes:12;	// bit 0-11
+#else
+		u32 psr_ndes:12;	// bit 0-11
+		u32 unused:20;		// bits 12-31
+#endif
+	} bits;
+} RXDMA_PSR_NUM_DES_t, *PRXDMA_PSR_NUM_DES_t;
+
+/*
+ * structure for packet status ring available offset reg in rxdma address map
+ * located at address 0x202C
+ */
+typedef union _RXDMA_PSR_AVAIL_OFFSET_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:19;		// bits 13-31
+		u32 psr_avail_wrap:1;	// bit 12
+		u32 psr_avail:12;	// bit 0-11
+#else
+		u32 psr_avail:12;	// bit 0-11
+		u32 psr_avail_wrap:1;	// bit 12
+		u32 unused:19;		// bits 13-31
+#endif
+	} bits;
+} RXDMA_PSR_AVAIL_OFFSET_t, *PRXDMA_PSR_AVAIL_OFFSET_t;
+
+/*
+ * structure for packet status ring full offset reg in rxdma address map
+ * located at address 0x2030
+ */
+typedef union _RXDMA_PSR_FULL_OFFSET_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:19;		// bits 13-31
+		u32 psr_full_wrap:1;	// bit 12
+		u32 psr_full:12;	// bit 0-11
+#else
+		u32 psr_full:12;	// bit 0-11
+		u32 psr_full_wrap:1;	// bit 12
+		u32 unused:19;		// bits 13-31
+#endif
+	} bits;
+} RXDMA_PSR_FULL_OFFSET_t, *PRXDMA_PSR_FULL_OFFSET_t;
+
+/*
+ * structure for packet status ring access index reg in rxdma address map
+ * located at address 0x2034
+ */
+typedef union _RXDMA_PSR_ACCESS_INDEX_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:27;	// bits 5-31
+		u32 psr_ai:5;	// bits 0-4
+#else
+		u32 psr_ai:5;	// bits 0-4
+		u32 unused:27;	// bits 5-31
+#endif
+	} bits;
+} RXDMA_PSR_ACCESS_INDEX_t, *PRXDMA_PSR_ACCESS_INDEX_t;
+
+/*
+ * structure for packet status ring minimum descriptors reg in rxdma address
+ * map.  Located at address 0x2038
+ */
+typedef union _RXDMA_PSR_MIN_DES_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:20;	// bits 12-31
+		u32 psr_min:12;	// bits 0-11
+#else
+		u32 psr_min:12;	// bits 0-11
+		u32 unused:20;	// bits 12-31
+#endif
+	} bits;
+} RXDMA_PSR_MIN_DES_t, *PRXDMA_PSR_MIN_DES_t;
+
+/*
+ * structure for free buffer ring base lo address reg in rxdma address map
+ * located at address 0x203C
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for free buffer ring base hi address reg in rxdma address map
+ * located at address 0x2040
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for free buffer ring number of descriptors reg in rxdma address
+ * map.  Located at address 0x2044
+ */
+typedef union _RXDMA_FBR_NUM_DES_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:22;		// bits 10-31
+		u32 fbr_ndesc:10;	// bits 0-9
+#else
+		u32 fbr_ndesc:10;	// bits 0-9
+		u32 unused:22;		// bits 10-31
+#endif
+	} bits;
+} RXDMA_FBR_NUM_DES_t, *PRXDMA_FBR_NUM_DES_t;
+
+/*
+ * structure for free buffer ring 0 available offset reg in rxdma address map
+ * located at address 0x2048
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for free buffer ring 0 full offset reg in rxdma address map
+ * located at address 0x204C
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for free buffer cache 0 full offset reg in rxdma address map
+ * located at address 0x2050
+ */
+typedef union _RXDMA_FBC_RD_INDEX_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:27;	// bits 5-31
+		u32 fbc_rdi:5;	// bit 0-4
+#else
+		u32 fbc_rdi:5;	// bit 0-4
+		u32 unused:27;	// bits 5-31
+#endif
+	} bits;
+} RXDMA_FBC_RD_INDEX_t, *PRXDMA_FBC_RD_INDEX_t;
+
+/*
+ * structure for free buffer ring 0 minimum descriptor reg in rxdma address map
+ * located at address 0x2054
+ */
+typedef union _RXDMA_FBR_MIN_DES_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:22;	// bits 10-31
+		u32 fbr_min:10;	// bits 0-9
+#else
+		u32 fbr_min:10;	// bits 0-9
+		u32 unused:22;	// bits 10-31
+#endif
+	} bits;
+} RXDMA_FBR_MIN_DES_t, *PRXDMA_FBR_MIN_DES_t;
+
+/*
+ * structure for free buffer ring 1 base address lo reg in rxdma address map
+ * located at address 0x2058 - 0x205C
+ * Defined earlier (RXDMA_FBR_BASE_LO_t and RXDMA_FBR_BASE_HI_t)
+ */
+
+/*
+ * structure for free buffer ring 1 number of descriptors reg in rxdma address
+ * map.  Located at address 0x2060
+ * Defined earlier (RXDMA_FBR_NUM_DES_t)
+ */
+
+/*
+ * structure for free buffer ring 1 available offset reg in rxdma address map
+ * located at address 0x2064
+ * Defined Earlier (RXDMA_FBR_AVAIL_OFFSET_t)
+ */
+
+/*
+ * structure for free buffer ring 1 full offset reg in rxdma address map
+ * located at address 0x2068
+ * Defined Earlier (RXDMA_FBR_FULL_OFFSET_t)
+ */
+
+/*
+ * structure for free buffer cache 1 read index reg in rxdma address map
+ * located at address 0x206C
+ * Defined Earlier (RXDMA_FBC_RD_INDEX_t)
+ */
+
+/*
+ * structure for free buffer ring 1 minimum descriptor reg in rxdma address map
+ * located at address 0x2070
+ * Defined Earlier (RXDMA_FBR_MIN_DES_t)
+ */
+
+/*
+ * Rx DMA Module of JAGCore Address Mapping
+ * Located at address 0x2000
+ */
+typedef struct _RXDMA_t {				// Location:
+	RXDMA_CSR_t csr;				//  0x2000
+	u32 dma_wb_base_lo;				//  0x2004
+	u32 dma_wb_base_hi;				//  0x2008
+	RXDMA_NUM_PKT_DONE_t num_pkt_done;		//  0x200C
+	RXDMA_MAX_PKT_TIME_t max_pkt_time;		//  0x2010
+	DMA10W_t rxq_rd_addr;				//  0x2014
+	DMA10W_t rxq_rd_addr_ext;			//  0x2018
+	DMA10W_t rxq_wr_addr;				//  0x201C
+	u32 psr_base_lo;				//  0x2020
+	u32 psr_base_hi;				//  0x2024
+	RXDMA_PSR_NUM_DES_t psr_num_des;		//  0x2028
+	RXDMA_PSR_AVAIL_OFFSET_t psr_avail_offset;	//  0x202C
+	RXDMA_PSR_FULL_OFFSET_t psr_full_offset;	//  0x2030
+	RXDMA_PSR_ACCESS_INDEX_t psr_access_index;	//  0x2034
+	RXDMA_PSR_MIN_DES_t psr_min_des;		//  0x2038
+	u32 fbr0_base_lo;				//  0x203C
+	u32 fbr0_base_hi;				//  0x2040
+	RXDMA_FBR_NUM_DES_t fbr0_num_des;		//  0x2044
+	DMA10W_t fbr0_avail_offset;			//  0x2048
+	DMA10W_t fbr0_full_offset;			//  0x204C
+	RXDMA_FBC_RD_INDEX_t fbr0_rd_index;		//  0x2050
+	RXDMA_FBR_MIN_DES_t fbr0_min_des;		//  0x2054
+	u32 fbr1_base_lo;				//  0x2058
+	u32 fbr1_base_hi;				//  0x205C
+	RXDMA_FBR_NUM_DES_t fbr1_num_des;		//  0x2060
+	DMA10W_t fbr1_avail_offset;			//  0x2064
+	DMA10W_t fbr1_full_offset;			//  0x2068
+	RXDMA_FBC_RD_INDEX_t fbr1_rd_index;		//  0x206C
+	RXDMA_FBR_MIN_DES_t fbr1_min_des;		//  0x2070
+} RXDMA_t, *PRXDMA_t;
+
+/* END OF RXDMA REGISTER ADDRESS MAP */
+
+
+/* START OF TXMAC REGISTER ADDRESS MAP */
+
+/*
+ * structure for control reg in txmac address map
+ * located at address 0x3000
+ */
+typedef union _TXMAC_CTL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:24;		// bits 8-31
+		u32 cklseg_diable:1;	// bit 7
+		u32 ckbcnt_disable:1;	// bit 6
+		u32 cksegnum:1;		// bit 5
+		u32 async_disable:1;	// bit 4
+		u32 fc_disable:1;	// bit 3
+		u32 mcif_disable:1;	// bit 2
+		u32 mif_disable:1;	// bit 1
+		u32 txmac_en:1;		// bit 0
+#else
+		u32 txmac_en:1;		// bit 0
+		u32 mif_disable:1;	// bit 1 mac interface
+		u32 mcif_disable:1;	// bit 2 mem. contr. interface
+		u32 fc_disable:1;	// bit 3
+		u32 async_disable:1;	// bit 4
+		u32 cksegnum:1;		// bit 5
+		u32 ckbcnt_disable:1;	// bit 6
+		u32 cklseg_diable:1;	// bit 7
+		u32 unused:24;		// bits 8-31
+#endif
+	} bits;
+} TXMAC_CTL_t, *PTXMAC_CTL_t;
+
+/*
+ * structure for shadow pointer reg in txmac address map
+ * located at address 0x3004
+ */
+typedef union _TXMAC_SHADOW_PTR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved2:5;	// bits 27-31
+		u32 txq_rd_ptr:11;	// bits 16-26
+		u32 reserved:5;		// bits 11-15
+		u32 txq_wr_ptr:11;	// bits 0-10
+#else
+		u32 txq_wr_ptr:11;	// bits 0-10
+		u32 reserved:5;		// bits 11-15
+		u32 txq_rd_ptr:11;	// bits 16-26
+		u32 reserved2:5;	// bits 27-31
+#endif
+	} bits;
+} TXMAC_SHADOW_PTR_t, *PTXMAC_SHADOW_PTR_t;
+
+/*
+ * structure for error count reg in txmac address map
+ * located at address 0x3008
+ */
+typedef union _TXMAC_ERR_CNT_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:20;		// bits 12-31
+		u32 reserved:4;		// bits 8-11
+		u32 txq_underrun:4;	// bits 4-7
+		u32 fifo_underrun:4;	// bits 0-3
+#else
+		u32 fifo_underrun:4;	// bits 0-3
+		u32 txq_underrun:4;	// bits 4-7
+		u32 reserved:4;		// bits 8-11
+		u32 unused:20;		// bits 12-31
+#endif
+	} bits;
+} TXMAC_ERR_CNT_t, *PTXMAC_ERR_CNT_t;
+
+/*
+ * structure for max fill reg in txmac address map
+ * located at address 0x300C
+ */
+typedef union _TXMAC_MAX_FILL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:20;		// bits 12-31
+		u32 max_fill:12;	// bits 0-11
+#else
+		u32 max_fill:12;	// bits 0-11
+		u32 unused:20;		// bits 12-31
+#endif
+	} bits;
+} TXMAC_MAX_FILL_t, *PTXMAC_MAX_FILL_t;
+
+/*
+ * structure for cf parameter reg in txmac address map
+ * located at address 0x3010
+ */
+typedef union _TXMAC_CF_PARAM_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 cfep:16;	// bits 16-31
+		u32 cfpt:16;	// bits 0-15
+#else
+		u32 cfpt:16;	// bits 0-15
+		u32 cfep:16;	// bits 16-31
+#endif
+	} bits;
+} TXMAC_CF_PARAM_t, *PTXMAC_CF_PARAM_t;
+
+/*
+ * structure for tx test reg in txmac address map
+ * located at address 0x3014
+ */
+typedef union _TXMAC_TXTEST_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused2:15;		// bits 17-31
+		u32 reserved1:1;	// bit 16
+		u32 txtest_en:1;	// bit 15
+		u32 unused1:4;		// bits 11-14
+		u32 txqtest_ptr:11;	// bits 0-11
+#else
+		u32 txqtest_ptr:11;	// bits 0-10
+		u32 unused1:4;		// bits 11-14
+		u32 txtest_en:1;	// bit 15
+		u32 reserved1:1;	// bit 16
+		u32 unused2:15;		// bits 17-31
+#endif
+	} bits;
+} TXMAC_TXTEST_t, *PTXMAC_TXTEST_t;
+
+/*
+ * structure for error reg in txmac address map
+ * located at address 0x3018
+ */
+typedef union _TXMAC_ERR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused2:23;		// bits 9-31
+		u32 fifo_underrun:1;	// bit 8
+		u32 unused1:2;		// bits 6-7
+		u32 ctrl2_err:1;	// bit 5
+		u32 txq_underrun:1;	// bit 4
+		u32 bcnt_err:1;		// bit 3
+		u32 lseg_err:1;		// bit 2
+		u32 segnum_err:1;	// bit 1
+		u32 seg0_err:1;		// bit 0
+#else
+		u32 seg0_err:1;		// bit 0
+		u32 segnum_err:1;	// bit 1
+		u32 lseg_err:1;		// bit 2
+		u32 bcnt_err:1;		// bit 3
+		u32 txq_underrun:1;	// bit 4
+		u32 ctrl2_err:1;	// bit 5
+		u32 unused1:2;		// bits 6-7
+		u32 fifo_underrun:1;	// bit 8
+		u32 unused2:23;		// bits 9-31
+#endif
+	} bits;
+} TXMAC_ERR_t, *PTXMAC_ERR_t;
+
+/*
+ * structure for error interrupt reg in txmac address map
+ * located at address 0x301C
+ */
+typedef union _TXMAC_ERR_INT_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused2:23;		// bits 9-31
+		u32 fifo_underrun:1;	// bit 8
+		u32 unused1:2;		// bits 6-7
+		u32 ctrl2_err:1;	// bit 5
+		u32 txq_underrun:1;	// bit 4
+		u32 bcnt_err:1;		// bit 3
+		u32 lseg_err:1;		// bit 2
+		u32 segnum_err:1;	// bit 1
+		u32 seg0_err:1;		// bit 0
+#else
+		u32 seg0_err:1;		// bit 0
+		u32 segnum_err:1;	// bit 1
+		u32 lseg_err:1;		// bit 2
+		u32 bcnt_err:1;		// bit 3
+		u32 txq_underrun:1;	// bit 4
+		u32 ctrl2_err:1;	// bit 5
+		u32 unused1:2;		// bits 6-7
+		u32 fifo_underrun:1;	// bit 8
+		u32 unused2:23;		// bits 9-31
+#endif
+	} bits;
+} TXMAC_ERR_INT_t, *PTXMAC_ERR_INT_t;
+
+/*
+ * structure for error interrupt reg in txmac address map
+ * located at address 0x3020
+ */
+typedef union _TXMAC_CP_CTRL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:30;		// bits 2-31
+		u32 bp_req:1;		// bit 1
+		u32 bp_xonxoff:1;	// bit 0
+#else
+		u32 bp_xonxoff:1;	// bit 0
+		u32 bp_req:1;		// bit 1
+		u32 unused:30;		// bits 2-31
+#endif
+	} bits;
+} TXMAC_BP_CTRL_t, *PTXMAC_BP_CTRL_t;
+
+/*
+ * Tx MAC Module of JAGCore Address Mapping
+ */
+typedef struct _TXMAC_t {		// Location:
+	TXMAC_CTL_t ctl;		//  0x3000
+	TXMAC_SHADOW_PTR_t shadow_ptr;	//  0x3004
+	TXMAC_ERR_CNT_t err_cnt;	//  0x3008
+	TXMAC_MAX_FILL_t max_fill;	//  0x300C
+	TXMAC_CF_PARAM_t cf_param;	//  0x3010
+	TXMAC_TXTEST_t tx_test;		//  0x3014
+	TXMAC_ERR_t err;		//  0x3018
+	TXMAC_ERR_INT_t err_int;	//  0x301C
+	TXMAC_BP_CTRL_t bp_ctrl;	//  0x3020
+} TXMAC_t, *PTXMAC_t;
+
+/* END OF TXMAC REGISTER ADDRESS MAP */
+
+/* START OF RXMAC REGISTER ADDRESS MAP */
+
+/*
+ * structure for rxmac control reg in rxmac address map
+ * located at address 0x4000
+ */
+typedef union _RXMAC_CTRL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:25;		// bits 7-31
+		u32 rxmac_int_disable:1;	// bit 6
+		u32 async_disable:1;		// bit 5
+		u32 mif_disable:1;		// bit 4
+		u32 wol_disable:1;		// bit 3
+		u32 pkt_filter_disable:1;	// bit 2
+		u32 mcif_disable:1;		// bit 1
+		u32 rxmac_en:1;			// bit 0
+#else
+		u32 rxmac_en:1;			// bit 0
+		u32 mcif_disable:1;		// bit 1
+		u32 pkt_filter_disable:1;	// bit 2
+		u32 wol_disable:1;		// bit 3
+		u32 mif_disable:1;		// bit 4
+		u32 async_disable:1;		// bit 5
+		u32 rxmac_int_disable:1;	// bit 6
+		u32 reserved:25;		// bits 7-31
+#endif
+	} bits;
+} RXMAC_CTRL_t, *PRXMAC_CTRL_t;
+
+/*
+ * structure for Wake On Lan Control and CRC 0 reg in rxmac address map
+ * located at address 0x4004
+ */
+typedef union _RXMAC_WOL_CTL_CRC0_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 crc0:16;		// bits 16-31
+		u32 reserve:4;		// bits 12-15
+		u32 ignore_pp:1;	// bit 11
+		u32 ignore_mp:1;	// bit 10
+		u32 clr_intr:1;		// bit 9
+		u32 ignore_link_chg:1;	// bit 8
+		u32 ignore_uni:1;	// bit 7
+		u32 ignore_multi:1;	// bit 6
+		u32 ignore_broad:1;	// bit 5
+		u32 valid_crc4:1;	// bit 4
+		u32 valid_crc3:1;	// bit 3
+		u32 valid_crc2:1;	// bit 2
+		u32 valid_crc1:1;	// bit 1
+		u32 valid_crc0:1;	// bit 0
+#else
+		u32 valid_crc0:1;	// bit 0
+		u32 valid_crc1:1;	// bit 1
+		u32 valid_crc2:1;	// bit 2
+		u32 valid_crc3:1;	// bit 3
+		u32 valid_crc4:1;	// bit 4
+		u32 ignore_broad:1;	// bit 5
+		u32 ignore_multi:1;	// bit 6
+		u32 ignore_uni:1;	// bit 7
+		u32 ignore_link_chg:1;	// bit 8
+		u32 clr_intr:1;		// bit 9
+		u32 ignore_mp:1;	// bit 10
+		u32 ignore_pp:1;	// bit 11
+		u32 reserve:4;		// bits 12-15
+		u32 crc0:16;		// bits 16-31
+#endif
+	} bits;
+} RXMAC_WOL_CTL_CRC0_t, *PRXMAC_WOL_CTL_CRC0_t;
+
+/*
+ * structure for CRC 1 and CRC 2 reg in rxmac address map
+ * located at address 0x4008
+ */
+typedef union _RXMAC_WOL_CRC12_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 crc2:16;	// bits 16-31
+		u32 crc1:16;	// bits 0-15
+#else
+		u32 crc1:16;	// bits 0-15
+		u32 crc2:16;	// bits 16-31
+#endif
+	} bits;
+} RXMAC_WOL_CRC12_t, *PRXMAC_WOL_CRC12_t;
+
+/*
+ * structure for CRC 3 and CRC 4 reg in rxmac address map
+ * located at address 0x400C
+ */
+typedef union _RXMAC_WOL_CRC34_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 crc4:16;	// bits 16-31
+		u32 crc3:16;	// bits 0-15
+#else
+		u32 crc3:16;	// bits 0-15
+		u32 crc4:16;	// bits 16-31
+#endif
+	} bits;
+} RXMAC_WOL_CRC34_t, *PRXMAC_WOL_CRC34_t;
+
+/*
+ * structure for Wake On Lan Source Address Lo reg in rxmac address map
+ * located at address 0x4010
+ */
+typedef union _RXMAC_WOL_SA_LO_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 sa3:8;	// bits 24-31
+		u32 sa4:8;	// bits 16-23
+		u32 sa5:8;	// bits 8-15
+		u32 sa6:8;	// bits 0-7
+#else
+		u32 sa6:8;	// bits 0-7
+		u32 sa5:8;	// bits 8-15
+		u32 sa4:8;	// bits 16-23
+		u32 sa3:8;	// bits 24-31
+#endif
+	} bits;
+} RXMAC_WOL_SA_LO_t, *PRXMAC_WOL_SA_LO_t;
+
+/*
+ * structure for Wake On Lan Source Address Hi reg in rxmac address map
+ * located at address 0x4014
+ */
+typedef union _RXMAC_WOL_SA_HI_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:16;	// bits 16-31
+		u32 sa1:8;		// bits 8-15
+		u32 sa2:8;		// bits 0-7
+#else
+		u32 sa2:8;		// bits 0-7
+		u32 sa1:8;		// bits 8-15
+		u32 reserved:16;	// bits 16-31
+#endif
+	} bits;
+} RXMAC_WOL_SA_HI_t, *PRXMAC_WOL_SA_HI_t;
+
+/*
+ * structure for Wake On Lan mask reg in rxmac address map
+ * located at address 0x4018 - 0x4064
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for Unicast Paket Filter Address 1 reg in rxmac address map
+ * located at address 0x4068
+ */
+typedef union _RXMAC_UNI_PF_ADDR1_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 addr1_3:8;	// bits 24-31
+		u32 addr1_4:8;	// bits 16-23
+		u32 addr1_5:8;	// bits 8-15
+		u32 addr1_6:8;	// bits 0-7
+#else
+		u32 addr1_6:8;	// bits 0-7
+		u32 addr1_5:8;	// bits 8-15
+		u32 addr1_4:8;	// bits 16-23
+		u32 addr1_3:8;	// bits 24-31
+#endif
+	} bits;
+} RXMAC_UNI_PF_ADDR1_t, *PRXMAC_UNI_PF_ADDR1_t;
+
+/*
+ * structure for Unicast Paket Filter Address 2 reg in rxmac address map
+ * located at address 0x406C
+ */
+typedef union _RXMAC_UNI_PF_ADDR2_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 addr2_3:8;	// bits 24-31
+		u32 addr2_4:8;	// bits 16-23
+		u32 addr2_5:8;	// bits 8-15
+		u32 addr2_6:8;	// bits 0-7
+#else
+		u32 addr2_6:8;	// bits 0-7
+		u32 addr2_5:8;	// bits 8-15
+		u32 addr2_4:8;	// bits 16-23
+		u32 addr2_3:8;	// bits 24-31
+#endif
+	} bits;
+} RXMAC_UNI_PF_ADDR2_t, *PRXMAC_UNI_PF_ADDR2_t;
+
+/*
+ * structure for Unicast Paket Filter Address 1 & 2 reg in rxmac address map
+ * located at address 0x4070
+ */
+typedef union _RXMAC_UNI_PF_ADDR3_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 addr2_1:8;	// bits 24-31
+		u32 addr2_2:8;	// bits 16-23
+		u32 addr1_1:8;	// bits 8-15
+		u32 addr1_2:8;	// bits 0-7
+#else
+		u32 addr1_2:8;	// bits 0-7
+		u32 addr1_1:8;	// bits 8-15
+		u32 addr2_2:8;	// bits 16-23
+		u32 addr2_1:8;	// bits 24-31
+#endif
+	} bits;
+} RXMAC_UNI_PF_ADDR3_t, *PRXMAC_UNI_PF_ADDR3_t;
+
+/*
+ * structure for Multicast Hash reg in rxmac address map
+ * located at address 0x4074 - 0x4080
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for Packet Filter Control reg in rxmac address map
+ * located at address 0x4084
+ */
+typedef union _RXMAC_PF_CTRL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused2:9;		// bits 23-31
+		u32 min_pkt_size:7;	// bits 16-22
+		u32 unused1:12;		// bits 4-15
+		u32 filter_frag_en:1;	// bit 3
+		u32 filter_uni_en:1;	// bit 2
+		u32 filter_multi_en:1;	// bit 1
+		u32 filter_broad_en:1;	// bit 0
+#else
+		u32 filter_broad_en:1;	// bit 0
+		u32 filter_multi_en:1;	// bit 1
+		u32 filter_uni_en:1;	// bit 2
+		u32 filter_frag_en:1;	// bit 3
+		u32 unused1:12;		// bits 4-15
+		u32 min_pkt_size:7;	// bits 16-22
+		u32 unused2:9;		// bits 23-31
+#endif
+	} bits;
+} RXMAC_PF_CTRL_t, *PRXMAC_PF_CTRL_t;
+
+/*
+ * structure for Memory Controller Interface Control Max Segment reg in rxmac
+ * address map.  Located at address 0x4088
+ */
+typedef union _RXMAC_MCIF_CTRL_MAX_SEG_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:22;	// bits 10-31
+		u32 max_size:8;	// bits 2-9
+		u32 fc_en:1;	// bit 1
+		u32 seg_en:1;	// bit 0
+#else
+		u32 seg_en:1;	// bit 0
+		u32 fc_en:1;	// bit 1
+		u32 max_size:8;	// bits 2-9
+		u32 reserved:22;	// bits 10-31
+#endif
+	} bits;
+} RXMAC_MCIF_CTRL_MAX_SEG_t, *PRXMAC_MCIF_CTRL_MAX_SEG_t;
+
+/*
+ * structure for Memory Controller Interface Water Mark reg in rxmac address
+ * map.  Located at address 0x408C
+ */
+typedef union _RXMAC_MCIF_WATER_MARK_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved2:6;	// bits 26-31
+		u32 mark_hi:10;	// bits 16-25
+		u32 reserved1:6;	// bits 10-15
+		u32 mark_lo:10;	// bits 0-9
+#else
+		u32 mark_lo:10;	// bits 0-9
+		u32 reserved1:6;	// bits 10-15
+		u32 mark_hi:10;	// bits 16-25
+		u32 reserved2:6;	// bits 26-31
+#endif
+	} bits;
+} RXMAC_MCIF_WATER_MARK_t, *PRXMAC_MCIF_WATER_MARK_t;
+
+/*
+ * structure for Rx Queue Dialog reg in rxmac address map.
+ * located at address 0x4090
+ */
+typedef union _RXMAC_RXQ_DIAG_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved2:6;	// bits 26-31
+		u32 rd_ptr:10;	// bits 16-25
+		u32 reserved1:6;	// bits 10-15
+		u32 wr_ptr:10;	// bits 0-9
+#else
+		u32 wr_ptr:10;	// bits 0-9
+		u32 reserved1:6;	// bits 10-15
+		u32 rd_ptr:10;	// bits 16-25
+		u32 reserved2:6;	// bits 26-31
+#endif
+	} bits;
+} RXMAC_RXQ_DIAG_t, *PRXMAC_RXQ_DIAG_t;
+
+/*
+ * structure for space availiable reg in rxmac address map.
+ * located at address 0x4094
+ */
+typedef union _RXMAC_SPACE_AVAIL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved2:15;		// bits 17-31
+		u32 space_avail_en:1;	// bit 16
+		u32 reserved1:6;		// bits 10-15
+		u32 space_avail:10;	// bits 0-9
+#else
+		u32 space_avail:10;	// bits 0-9
+		u32 reserved1:6;		// bits 10-15
+		u32 space_avail_en:1;	// bit 16
+		u32 reserved2:15;		// bits 17-31
+#endif
+	} bits;
+} RXMAC_SPACE_AVAIL_t, *PRXMAC_SPACE_AVAIL_t;
+
+/*
+ * structure for management interface reg in rxmac address map.
+ * located at address 0x4098
+ */
+typedef union _RXMAC_MIF_CTL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserve:14;		// bits 18-31
+		u32 drop_pkt_en:1;		// bit 17
+		u32 drop_pkt_mask:17;	// bits 0-16
+#else
+		u32 drop_pkt_mask:17;	// bits 0-16
+		u32 drop_pkt_en:1;		// bit 17
+		u32 reserve:14;		// bits 18-31
+#endif
+	} bits;
+} RXMAC_MIF_CTL_t, *PRXMAC_MIF_CTL_t;
+
+/*
+ * structure for Error reg in rxmac address map.
+ * located at address 0x409C
+ */
+typedef union _RXMAC_ERROR_REG_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserve:28;	// bits 4-31
+		u32 mif:1;		// bit 3
+		u32 async:1;	// bit 2
+		u32 pkt_filter:1;	// bit 1
+		u32 mcif:1;	// bit 0
+#else
+		u32 mcif:1;	// bit 0
+		u32 pkt_filter:1;	// bit 1
+		u32 async:1;	// bit 2
+		u32 mif:1;		// bit 3
+		u32 reserve:28;	// bits 4-31
+#endif
+	} bits;
+} RXMAC_ERROR_REG_t, *PRXMAC_ERROR_REG_t;
+
+/*
+ * Rx MAC Module of JAGCore Address Mapping
+ */
+typedef struct _RXMAC_t {				// Location:
+	RXMAC_CTRL_t ctrl;				//  0x4000
+	RXMAC_WOL_CTL_CRC0_t crc0;			//  0x4004
+	RXMAC_WOL_CRC12_t crc12;			//  0x4008
+	RXMAC_WOL_CRC34_t crc34;			//  0x400C
+	RXMAC_WOL_SA_LO_t sa_lo;			//  0x4010
+	RXMAC_WOL_SA_HI_t sa_hi;			//  0x4014
+	u32 mask0_word0;				//  0x4018
+	u32 mask0_word1;				//  0x401C
+	u32 mask0_word2;				//  0x4020
+	u32 mask0_word3;				//  0x4024
+	u32 mask1_word0;				//  0x4028
+	u32 mask1_word1;				//  0x402C
+	u32 mask1_word2;				//  0x4030
+	u32 mask1_word3;				//  0x4034
+	u32 mask2_word0;				//  0x4038
+	u32 mask2_word1;				//  0x403C
+	u32 mask2_word2;				//  0x4040
+	u32 mask2_word3;				//  0x4044
+	u32 mask3_word0;				//  0x4048
+	u32 mask3_word1;				//  0x404C
+	u32 mask3_word2;				//  0x4050
+	u32 mask3_word3;				//  0x4054
+	u32 mask4_word0;				//  0x4058
+	u32 mask4_word1;				//  0x405C
+	u32 mask4_word2;				//  0x4060
+	u32 mask4_word3;				//  0x4064
+	RXMAC_UNI_PF_ADDR1_t uni_pf_addr1;		//  0x4068
+	RXMAC_UNI_PF_ADDR2_t uni_pf_addr2;		//  0x406C
+	RXMAC_UNI_PF_ADDR3_t uni_pf_addr3;		//  0x4070
+	u32 multi_hash1;				//  0x4074
+	u32 multi_hash2;				//  0x4078
+	u32 multi_hash3;				//  0x407C
+	u32 multi_hash4;				//  0x4080
+	RXMAC_PF_CTRL_t pf_ctrl;			//  0x4084
+	RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg;	//  0x4088
+	RXMAC_MCIF_WATER_MARK_t mcif_water_mark;	//  0x408C
+	RXMAC_RXQ_DIAG_t rxq_diag;			//  0x4090
+	RXMAC_SPACE_AVAIL_t space_avail;		//  0x4094
+
+	RXMAC_MIF_CTL_t mif_ctrl;			//  0x4098
+	RXMAC_ERROR_REG_t err_reg;			//  0x409C
+} RXMAC_t, *PRXMAC_t;
+
+/* END OF TXMAC REGISTER ADDRESS MAP */
+
+
+/* START OF MAC REGISTER ADDRESS MAP */
+
+/*
+ * structure for configuration #1 reg in mac address map.
+ * located at address 0x5000
+ */
+typedef union _MAC_CFG1_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 soft_reset:1;		// bit 31
+		u32 sim_reset:1;		// bit 30
+		u32 reserved3:10;		// bits 20-29
+		u32 reset_rx_mc:1;		// bit 19
+		u32 reset_tx_mc:1;		// bit 18
+		u32 reset_rx_fun:1;	// bit 17
+		u32 reset_tx_fun:1;	// bit 16
+		u32 reserved2:7;		// bits 9-15
+		u32 loop_back:1;		// bit 8
+		u32 reserved1:2;		// bits 6-7
+		u32 rx_flow:1;		// bit 5
+		u32 tx_flow:1;		// bit 4
+		u32 syncd_rx_en:1;		// bit 3
+		u32 rx_enable:1;		// bit 2
+		u32 syncd_tx_en:1;		// bit 1
+		u32 tx_enable:1;		// bit 0
+#else
+		u32 tx_enable:1;		// bit 0
+		u32 syncd_tx_en:1;		// bit 1
+		u32 rx_enable:1;		// bit 2
+		u32 syncd_rx_en:1;		// bit 3
+		u32 tx_flow:1;		// bit 4
+		u32 rx_flow:1;		// bit 5
+		u32 reserved1:2;		// bits 6-7
+		u32 loop_back:1;		// bit 8
+		u32 reserved2:7;		// bits 9-15
+		u32 reset_tx_fun:1;	// bit 16
+		u32 reset_rx_fun:1;	// bit 17
+		u32 reset_tx_mc:1;		// bit 18
+		u32 reset_rx_mc:1;		// bit 19
+		u32 reserved3:10;		// bits 20-29
+		u32 sim_reset:1;		// bit 30
+		u32 soft_reset:1;		// bit 31
+#endif
+	} bits;
+} MAC_CFG1_t, *PMAC_CFG1_t;
+
+/*
+ * structure for configuration #2 reg in mac address map.
+ * located at address 0x5004
+ */
+typedef union _MAC_CFG2_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved3:16;		// bits 16-31
+		u32 preamble_len:4;	// bits 12-15
+		u32 reserved2:2;		// bits 10-11
+		u32 if_mode:2;		// bits 8-9
+		u32 reserved1:2;		// bits 6-7
+		u32 huge_frame:1;		// bit 5
+		u32 len_check:1;		// bit 4
+		u32 undefined:1;		// bit 3
+		u32 pad_crc:1;		// bit 2
+		u32 crc_enable:1;		// bit 1
+		u32 full_duplex:1;		// bit 0
+#else
+		u32 full_duplex:1;		// bit 0
+		u32 crc_enable:1;		// bit 1
+		u32 pad_crc:1;		// bit 2
+		u32 undefined:1;		// bit 3
+		u32 len_check:1;		// bit 4
+		u32 huge_frame:1;		// bit 5
+		u32 reserved1:2;		// bits 6-7
+		u32 if_mode:2;		// bits 8-9
+		u32 reserved2:2;		// bits 10-11
+		u32 preamble_len:4;	// bits 12-15
+		u32 reserved3:16;		// bits 16-31
+#endif
+	} bits;
+} MAC_CFG2_t, *PMAC_CFG2_t;
+
+/*
+ * structure for Interpacket gap reg in mac address map.
+ * located at address 0x5008
+ */
+typedef union _MAC_IPG_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:1;		// bit 31
+		u32 non_B2B_ipg_1:7;	// bits 24-30
+		u32 undefined2:1;		// bit 23
+		u32 non_B2B_ipg_2:7;	// bits 16-22
+		u32 min_ifg_enforce:8;	// bits 8-15
+		u32 undefined1:1;		// bit 7
+		u32 B2B_ipg:7;		// bits 0-6
+#else
+		u32 B2B_ipg:7;		// bits 0-6
+		u32 undefined1:1;		// bit 7
+		u32 min_ifg_enforce:8;	// bits 8-15
+		u32 non_B2B_ipg_2:7;	// bits 16-22
+		u32 undefined2:1;		// bit 23
+		u32 non_B2B_ipg_1:7;	// bits 24-30
+		u32 reserved:1;		// bit 31
+#endif
+	} bits;
+} MAC_IPG_t, *PMAC_IPG_t;
+
+/*
+ * structure for half duplex reg in mac address map.
+ * located at address 0x500C
+ */
+typedef union _MAC_HFDP_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved2:8;		// bits 24-31
+		u32 alt_beb_trunc:4;	// bits 23-20
+		u32 alt_beb_enable:1;	// bit 19
+		u32 bp_no_backoff:1;	// bit 18
+		u32 no_backoff:1;		// bit 17
+		u32 excess_defer:1;	// bit 16
+		u32 rexmit_max:4;		// bits 12-15
+		u32 reserved1:2;		// bits 10-11
+		u32 coll_window:10;	// bits 0-9
+#else
+		u32 coll_window:10;	// bits 0-9
+		u32 reserved1:2;		// bits 10-11
+		u32 rexmit_max:4;		// bits 12-15
+		u32 excess_defer:1;	// bit 16
+		u32 no_backoff:1;		// bit 17
+		u32 bp_no_backoff:1;	// bit 18
+		u32 alt_beb_enable:1;	// bit 19
+		u32 alt_beb_trunc:4;	// bits 23-20
+		u32 reserved2:8;		// bits 24-31
+#endif
+	} bits;
+} MAC_HFDP_t, *PMAC_HFDP_t;
+
+/*
+ * structure for Maximum Frame Length reg in mac address map.
+ * located at address 0x5010
+ */
+typedef union _MAC_MAX_FM_LEN_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:16;	// bits 16-31
+		u32 max_len:16;	// bits 0-15
+#else
+		u32 max_len:16;	// bits 0-15
+		u32 reserved:16;	// bits 16-31
+#endif
+	} bits;
+} MAC_MAX_FM_LEN_t, *PMAC_MAX_FM_LEN_t;
+
+/*
+ * structure for Reserve 1 reg in mac address map.
+ * located at address 0x5014 - 0x5018
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for Test reg in mac address map.
+ * located at address 0x501C
+ */
+typedef union _MAC_TEST_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:29;	// bits 3-31
+		u32 mac_test:3;	// bits 0-2
+#else
+		u32 mac_test:3;	// bits 0-2
+		u32 unused:29;	// bits 3-31
+#endif
+	} bits;
+} MAC_TEST_t, *PMAC_TEST_t;
+
+/*
+ * structure for MII Management Configuration reg in mac address map.
+ * located at address 0x5020
+ */
+typedef union _MII_MGMT_CFG_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reset_mii_mgmt:1;	// bit 31
+		u32 reserved:25;		// bits 6-30
+		u32 scan_auto_incremt:1;	// bit 5
+		u32 preamble_suppress:1;	// bit 4
+		u32 undefined:1;		// bit 3
+		u32 mgmt_clk_reset:3;	// bits 0-2
+#else
+		u32 mgmt_clk_reset:3;	// bits 0-2
+		u32 undefined:1;		// bit 3
+		u32 preamble_suppress:1;	// bit 4
+		u32 scan_auto_incremt:1;	// bit 5
+		u32 reserved:25;		// bits 6-30
+		u32 reset_mii_mgmt:1;	// bit 31
+#endif
+	} bits;
+} MII_MGMT_CFG_t, *PMII_MGMT_CFG_t;
+
+/*
+ * structure for MII Management Command reg in mac address map.
+ * located at address 0x5024
+ */
+typedef union _MII_MGMT_CMD_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:30;	// bits 2-31
+		u32 scan_cycle:1;	// bit 1
+		u32 read_cycle:1;	// bit 0
+#else
+		u32 read_cycle:1;	// bit 0
+		u32 scan_cycle:1;	// bit 1
+		u32 reserved:30;	// bits 2-31
+#endif
+	} bits;
+} MII_MGMT_CMD_t, *PMII_MGMT_CMD_t;
+
+/*
+ * structure for MII Management Address reg in mac address map.
+ * located at address 0x5028
+ */
+typedef union _MII_MGMT_ADDR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved2:19;	// bit 13-31
+		u32 phy_addr:5;	// bits 8-12
+		u32 reserved1:3;	// bits 5-7
+		u32 reg_addr:5;	// bits 0-4
+#else
+		u32 reg_addr:5;	// bits 0-4
+		u32 reserved1:3;	// bits 5-7
+		u32 phy_addr:5;	// bits 8-12
+		u32 reserved2:19;	// bit 13-31
+#endif
+	} bits;
+} MII_MGMT_ADDR_t, *PMII_MGMT_ADDR_t;
+
+/*
+ * structure for MII Management Control reg in mac address map.
+ * located at address 0x502C
+ */
+typedef union _MII_MGMT_CTRL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:16;	// bits 16-31
+		u32 phy_ctrl:16;	// bits 0-15
+#else
+		u32 phy_ctrl:16;	// bits 0-15
+		u32 reserved:16;	// bits 16-31
+#endif
+	} bits;
+} MII_MGMT_CTRL_t, *PMII_MGMT_CTRL_t;
+
+/*
+ * structure for MII Management Status reg in mac address map.
+ * located at address 0x5030
+ */
+typedef union _MII_MGMT_STAT_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:16;	// bits 16-31
+		u32 phy_stat:16;	// bits 0-15
+#else
+		u32 phy_stat:16;	// bits 0-15
+		u32 reserved:16;	// bits 16-31
+#endif
+	} bits;
+} MII_MGMT_STAT_t, *PMII_MGMT_STAT_t;
+
+/*
+ * structure for MII Management Indicators reg in mac address map.
+ * located at address 0x5034
+ */
+typedef union _MII_MGMT_INDICATOR_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:29;	// bits 3-31
+		u32 not_valid:1;	// bit 2
+		u32 scanning:1;	// bit 1
+		u32 busy:1;	// bit 0
+#else
+		u32 busy:1;	// bit 0
+		u32 scanning:1;	// bit 1
+		u32 not_valid:1;	// bit 2
+		u32 reserved:29;	// bits 3-31
+#endif
+	} bits;
+} MII_MGMT_INDICATOR_t, *PMII_MGMT_INDICATOR_t;
+
+/*
+ * structure for Interface Control reg in mac address map.
+ * located at address 0x5038
+ */
+typedef union _MAC_IF_CTRL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reset_if_module:1;	// bit 31
+		u32 reserved4:3;		// bit 28-30
+		u32 tbi_mode:1;		// bit 27
+		u32 ghd_mode:1;		// bit 26
+		u32 lhd_mode:1;		// bit 25
+		u32 phy_mode:1;		// bit 24
+		u32 reset_per_mii:1;	// bit 23
+		u32 reserved3:6;		// bits 17-22
+		u32 speed:1;		// bit 16
+		u32 reset_pe100x:1;	// bit 15
+		u32 reserved2:4;		// bits 11-14
+		u32 force_quiet:1;		// bit 10
+		u32 no_cipher:1;		// bit 9
+		u32 disable_link_fail:1;	// bit 8
+		u32 reset_gpsi:1;		// bit 7
+		u32 reserved1:6;		// bits 1-6
+		u32 enab_jab_protect:1;	// bit 0
+#else
+		u32 enab_jab_protect:1;	// bit 0
+		u32 reserved1:6;		// bits 1-6
+		u32 reset_gpsi:1;		// bit 7
+		u32 disable_link_fail:1;	// bit 8
+		u32 no_cipher:1;		// bit 9
+		u32 force_quiet:1;		// bit 10
+		u32 reserved2:4;		// bits 11-14
+		u32 reset_pe100x:1;	// bit 15
+		u32 speed:1;		// bit 16
+		u32 reserved3:6;		// bits 17-22
+		u32 reset_per_mii:1;	// bit 23
+		u32 phy_mode:1;		// bit 24
+		u32 lhd_mode:1;		// bit 25
+		u32 ghd_mode:1;		// bit 26
+		u32 tbi_mode:1;		// bit 27
+		u32 reserved4:3;		// bit 28-30
+		u32 reset_if_module:1;	// bit 31
+#endif
+	} bits;
+} MAC_IF_CTRL_t, *PMAC_IF_CTRL_t;
+
+/*
+ * structure for Interface Status reg in mac address map.
+ * located at address 0x503C
+ */
+typedef union _MAC_IF_STAT_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:22;		// bits 10-31
+		u32 excess_defer:1;	// bit 9
+		u32 clash:1;		// bit 8
+		u32 phy_jabber:1;		// bit 7
+		u32 phy_link_ok:1;		// bit 6
+		u32 phy_full_duplex:1;	// bit 5
+		u32 phy_speed:1;		// bit 4
+		u32 pe100x_link_fail:1;	// bit 3
+		u32 pe10t_loss_carrie:1;	// bit 2
+		u32 pe10t_sqe_error:1;	// bit 1
+		u32 pe10t_jabber:1;	// bit 0
+#else
+		u32 pe10t_jabber:1;	// bit 0
+		u32 pe10t_sqe_error:1;	// bit 1
+		u32 pe10t_loss_carrie:1;	// bit 2
+		u32 pe100x_link_fail:1;	// bit 3
+		u32 phy_speed:1;		// bit 4
+		u32 phy_full_duplex:1;	// bit 5
+		u32 phy_link_ok:1;		// bit 6
+		u32 phy_jabber:1;		// bit 7
+		u32 clash:1;		// bit 8
+		u32 excess_defer:1;	// bit 9
+		u32 reserved:22;		// bits 10-31
+#endif
+	} bits;
+} MAC_IF_STAT_t, *PMAC_IF_STAT_t;
+
+/*
+ * structure for Mac Station Address, Part 1 reg in mac address map.
+ * located at address 0x5040
+ */
+typedef union _MAC_STATION_ADDR1_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 Octet6:8;	// bits 24-31
+		u32 Octet5:8;	// bits 16-23
+		u32 Octet4:8;	// bits 8-15
+		u32 Octet3:8;	// bits 0-7
+#else
+		u32 Octet3:8;	// bits 0-7
+		u32 Octet4:8;	// bits 8-15
+		u32 Octet5:8;	// bits 16-23
+		u32 Octet6:8;	// bits 24-31
+#endif
+	} bits;
+} MAC_STATION_ADDR1_t, *PMAC_STATION_ADDR1_t;
+
+/*
+ * structure for Mac Station Address, Part 2 reg in mac address map.
+ * located at address 0x5044
+ */
+typedef union _MAC_STATION_ADDR2_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 Octet2:8;	// bits 24-31
+		u32 Octet1:8;	// bits 16-23
+		u32 reserved:16;	// bits 0-15
+#else
+		u32 reserved:16;	// bit 0-15
+		u32 Octet1:8;	// bits 16-23
+		u32 Octet2:8;	// bits 24-31
+#endif
+	} bits;
+} MAC_STATION_ADDR2_t, *PMAC_STATION_ADDR2_t;
+
+/*
+ * MAC Module of JAGCore Address Mapping
+ */
+typedef struct _MAC_t {					// Location:
+	MAC_CFG1_t cfg1;				//  0x5000
+	MAC_CFG2_t cfg2;				//  0x5004
+	MAC_IPG_t ipg;					//  0x5008
+	MAC_HFDP_t hfdp;				//  0x500C
+	MAC_MAX_FM_LEN_t max_fm_len;			//  0x5010
+	u32 rsv1;					//  0x5014
+	u32 rsv2;					//  0x5018
+	MAC_TEST_t mac_test;				//  0x501C
+	MII_MGMT_CFG_t mii_mgmt_cfg;			//  0x5020
+	MII_MGMT_CMD_t mii_mgmt_cmd;			//  0x5024
+	MII_MGMT_ADDR_t mii_mgmt_addr;			//  0x5028
+	MII_MGMT_CTRL_t mii_mgmt_ctrl;			//  0x502C
+	MII_MGMT_STAT_t mii_mgmt_stat;			//  0x5030
+	MII_MGMT_INDICATOR_t mii_mgmt_indicator;	//  0x5034
+	MAC_IF_CTRL_t if_ctrl;				//  0x5038
+	MAC_IF_STAT_t if_stat;				//  0x503C
+	MAC_STATION_ADDR1_t station_addr_1;		//  0x5040
+	MAC_STATION_ADDR2_t station_addr_2;		//  0x5044
+} MAC_t, *PMAC_t;
+
+/* END OF MAC REGISTER ADDRESS MAP */
+
+/* START OF MAC STAT REGISTER ADDRESS MAP */
+
+/*
+ * structure for Carry Register One and it's Mask Register reg located in mac
+ * stat address map address 0x6130 and 0x6138.
+ */
+typedef union _MAC_STAT_REG_1_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 tr64:1;	// bit 31
+		u32 tr127:1;	// bit 30
+		u32 tr255:1;	// bit 29
+		u32 tr511:1;	// bit 28
+		u32 tr1k:1;	// bit 27
+		u32 trmax:1;	// bit 26
+		u32 trmgv:1;	// bit 25
+		u32 unused:8;	// bits 17-24
+		u32 rbyt:1;	// bit 16
+		u32 rpkt:1;	// bit 15
+		u32 rfcs:1;	// bit 14
+		u32 rmca:1;	// bit 13
+		u32 rbca:1;	// bit 12
+		u32 rxcf:1;	// bit 11
+		u32 rxpf:1;	// bit 10
+		u32 rxuo:1;	// bit 9
+		u32 raln:1;	// bit 8
+		u32 rflr:1;	// bit 7
+		u32 rcde:1;	// bit 6
+		u32 rcse:1;	// bit 5
+		u32 rund:1;	// bit 4
+		u32 rovr:1;	// bit 3
+		u32 rfrg:1;	// bit 2
+		u32 rjbr:1;	// bit 1
+		u32 rdrp:1;	// bit 0
+#else
+		u32 rdrp:1;	// bit 0
+		u32 rjbr:1;	// bit 1
+		u32 rfrg:1;	// bit 2
+		u32 rovr:1;	// bit 3
+		u32 rund:1;	// bit 4
+		u32 rcse:1;	// bit 5
+		u32 rcde:1;	// bit 6
+		u32 rflr:1;	// bit 7
+		u32 raln:1;	// bit 8
+		u32 rxuo:1;	// bit 9
+		u32 rxpf:1;	// bit 10
+		u32 rxcf:1;	// bit 11
+		u32 rbca:1;	// bit 12
+		u32 rmca:1;	// bit 13
+		u32 rfcs:1;	// bit 14
+		u32 rpkt:1;	// bit 15
+		u32 rbyt:1;	// bit 16
+		u32 unused:8;	// bits 17-24
+		u32 trmgv:1;	// bit 25
+		u32 trmax:1;	// bit 26
+		u32 tr1k:1;	// bit 27
+		u32 tr511:1;	// bit 28
+		u32 tr255:1;	// bit 29
+		u32 tr127:1;	// bit 30
+		u32 tr64:1;	// bit 31
+#endif
+	} bits;
+} MAC_STAT_REG_1_t, *PMAC_STAT_REG_1_t;
+
+/*
+ * structure for Carry Register Two Mask Register reg in mac stat address map.
+ * located at address 0x613C
+ */
+typedef union _MAC_STAT_REG_2_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:12;	// bit 20-31
+		u32 tjbr:1;	// bit 19
+		u32 tfcs:1;	// bit 18
+		u32 txcf:1;	// bit 17
+		u32 tovr:1;	// bit 16
+		u32 tund:1;	// bit 15
+		u32 tfrg:1;	// bit 14
+		u32 tbyt:1;	// bit 13
+		u32 tpkt:1;	// bit 12
+		u32 tmca:1;	// bit 11
+		u32 tbca:1;	// bit 10
+		u32 txpf:1;	// bit 9
+		u32 tdfr:1;	// bit 8
+		u32 tedf:1;	// bit 7
+		u32 tscl:1;	// bit 6
+		u32 tmcl:1;	// bit 5
+		u32 tlcl:1;	// bit 4
+		u32 txcl:1;	// bit 3
+		u32 tncl:1;	// bit 2
+		u32 tpfh:1;	// bit 1
+		u32 tdrp:1;	// bit 0
+#else
+		u32 tdrp:1;	// bit 0
+		u32 tpfh:1;	// bit 1
+		u32 tncl:1;	// bit 2
+		u32 txcl:1;	// bit 3
+		u32 tlcl:1;	// bit 4
+		u32 tmcl:1;	// bit 5
+		u32 tscl:1;	// bit 6
+		u32 tedf:1;	// bit 7
+		u32 tdfr:1;	// bit 8
+		u32 txpf:1;	// bit 9
+		u32 tbca:1;	// bit 10
+		u32 tmca:1;	// bit 11
+		u32 tpkt:1;	// bit 12
+		u32 tbyt:1;	// bit 13
+		u32 tfrg:1;	// bit 14
+		u32 tund:1;	// bit 15
+		u32 tovr:1;	// bit 16
+		u32 txcf:1;	// bit 17
+		u32 tfcs:1;	// bit 18
+		u32 tjbr:1;	// bit 19
+		u32 unused:12;	// bit 20-31
+#endif
+	} bits;
+} MAC_STAT_REG_2_t, *PMAC_STAT_REG_2_t;
+
+/*
+ * MAC STATS Module of JAGCore Address Mapping
+ */
+typedef struct _MAC_STAT_t {		// Location:
+	u32 pad[32];		//  0x6000 - 607C
+
+	// Tx/Rx 0-64 Byte Frame Counter
+	u32 TR64;			//  0x6080
+
+	// Tx/Rx 65-127 Byte Frame Counter
+	u32 TR127;			//  0x6084
+
+	// Tx/Rx 128-255 Byte Frame Counter
+	u32 TR255;			//  0x6088
+
+	// Tx/Rx 256-511 Byte Frame Counter
+	u32 TR511;			//  0x608C
+
+	// Tx/Rx 512-1023 Byte Frame Counter
+	u32 TR1K;			//  0x6090
+
+	// Tx/Rx 1024-1518 Byte Frame Counter
+	u32 TRMax;			//  0x6094
+
+	// Tx/Rx 1519-1522 Byte Good VLAN Frame Count
+	u32 TRMgv;			//  0x6098
+
+	// Rx Byte Counter
+	u32 RByt;			//  0x609C
+
+	// Rx Packet Counter
+	u32 RPkt;			//  0x60A0
+
+	// Rx FCS Error Counter
+	u32 RFcs;			//  0x60A4
+
+	// Rx Multicast Packet Counter
+	u32 RMca;			//  0x60A8
+
+	// Rx Broadcast Packet Counter
+	u32 RBca;			//  0x60AC
+
+	// Rx Control Frame Packet Counter
+	u32 RxCf;			//  0x60B0
+
+	// Rx Pause Frame Packet Counter
+	u32 RxPf;			//  0x60B4
+
+	// Rx Unknown OP Code Counter
+	u32 RxUo;			//  0x60B8
+
+	// Rx Alignment Error Counter
+	u32 RAln;			//  0x60BC
+
+	// Rx Frame Length Error Counter
+	u32 RFlr;			//  0x60C0
+
+	// Rx Code Error Counter
+	u32 RCde;			//  0x60C4
+
+	// Rx Carrier Sense Error Counter
+	u32 RCse;			//  0x60C8
+
+	// Rx Undersize Packet Counter
+	u32 RUnd;			//  0x60CC
+
+	// Rx Oversize Packet Counter
+	u32 ROvr;			//  0x60D0
+
+	// Rx Fragment Counter
+	u32 RFrg;			//  0x60D4
+
+	// Rx Jabber Counter
+	u32 RJbr;			//  0x60D8
+
+	// Rx Drop
+	u32 RDrp;			//  0x60DC
+
+	// Tx Byte Counter
+	u32 TByt;			//  0x60E0
+
+	// Tx Packet Counter
+	u32 TPkt;			//  0x60E4
+
+	// Tx Multicast Packet Counter
+	u32 TMca;			//  0x60E8
+
+	// Tx Broadcast Packet Counter
+	u32 TBca;			//  0x60EC
+
+	// Tx Pause Control Frame Counter
+	u32 TxPf;			//  0x60F0
+
+	// Tx Deferral Packet Counter
+	u32 TDfr;			//  0x60F4
+
+	// Tx Excessive Deferral Packet Counter
+	u32 TEdf;			//  0x60F8
+
+	// Tx Single Collision Packet Counter
+	u32 TScl;			//  0x60FC
+
+	// Tx Multiple Collision Packet Counter
+	u32 TMcl;			//  0x6100
+
+	// Tx Late Collision Packet Counter
+	u32 TLcl;			//  0x6104
+
+	// Tx Excessive Collision Packet Counter
+	u32 TXcl;			//  0x6108
+
+	// Tx Total Collision Packet Counter
+	u32 TNcl;			//  0x610C
+
+	// Tx Pause Frame Honored Counter
+	u32 TPfh;			//  0x6110
+
+	// Tx Drop Frame Counter
+	u32 TDrp;			//  0x6114
+
+	// Tx Jabber Frame Counter
+	u32 TJbr;			//  0x6118
+
+	// Tx FCS Error Counter
+	u32 TFcs;			//  0x611C
+
+	// Tx Control Frame Counter
+	u32 TxCf;			//  0x6120
+
+	// Tx Oversize Frame Counter
+	u32 TOvr;			//  0x6124
+
+	// Tx Undersize Frame Counter
+	u32 TUnd;			//  0x6128
+
+	// Tx Fragments Frame Counter
+	u32 TFrg;			//  0x612C
+
+	// Carry Register One Register
+	MAC_STAT_REG_1_t Carry1;	//  0x6130
+
+	// Carry Register Two Register
+	MAC_STAT_REG_2_t Carry2;	//  0x6134
+
+	// Carry Register One Mask Register
+	MAC_STAT_REG_1_t Carry1M;	//  0x6138
+
+	// Carry Register Two Mask Register
+	MAC_STAT_REG_2_t Carry2M;	//  0x613C
+} MAC_STAT_t, *PMAC_STAT_t;
+
+/* END OF MAC STAT REGISTER ADDRESS MAP */
+
+
+/* START OF MMC REGISTER ADDRESS MAP */
+
+/*
+ * structure for Main Memory Controller Control reg in mmc address map.
+ * located at address 0x7000
+ */
+typedef union _MMC_CTRL_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:25;		// bits 7-31
+		u32 force_ce:1;		// bit 6
+		u32 rxdma_disable:1;	// bit 5
+		u32 txdma_disable:1;	// bit 4
+		u32 txmac_disable:1;	// bit 3
+		u32 rxmac_disable:1;	// bit 2
+		u32 arb_disable:1;		// bit 1
+		u32 mmc_enable:1;		// bit 0
+#else
+		u32 mmc_enable:1;		// bit 0
+		u32 arb_disable:1;		// bit 1
+		u32 rxmac_disable:1;	// bit 2
+		u32 txmac_disable:1;	// bit 3
+		u32 txdma_disable:1;	// bit 4
+		u32 rxdma_disable:1;	// bit 5
+		u32 force_ce:1;		// bit 6
+		u32 reserved:25;		// bits 7-31
+#endif
+	} bits;
+} MMC_CTRL_t, *PMMC_CTRL_t;
+
+/*
+ * structure for Main Memory Controller Host Memory Access Address reg in mmc
+ * address map.  Located at address 0x7004
+ */
+typedef union _MMC_SRAM_ACCESS_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 byte_enable:16;	// bits 16-31
+		u32 reserved2:2;		// bits 14-15
+		u32 req_addr:10;		// bits 4-13
+		u32 reserved1:1;		// bit 3
+		u32 is_ctrl_word:1;	// bit 2
+		u32 wr_access:1;		// bit 1
+		u32 req_access:1;		// bit 0
+#else
+		u32 req_access:1;		// bit 0
+		u32 wr_access:1;		// bit 1
+		u32 is_ctrl_word:1;	// bit 2
+		u32 reserved1:1;		// bit 3
+		u32 req_addr:10;		// bits 4-13
+		u32 reserved2:2;		// bits 14-15
+		u32 byte_enable:16;	// bits 16-31
+#endif
+	} bits;
+} MMC_SRAM_ACCESS_t, *PMMC_SRAM_ACCESS_t;
+
+/*
+ * structure for Main Memory Controller Host Memory Access Data reg in mmc
+ * address map.  Located at address 0x7008 - 0x7014
+ * Defined earlier (u32)
+ */
+
+/*
+ * Memory Control Module of JAGCore Address Mapping
+ */
+typedef struct _MMC_t {			// Location:
+	MMC_CTRL_t mmc_ctrl;		//  0x7000
+	MMC_SRAM_ACCESS_t sram_access;	//  0x7004
+	u32 sram_word1;		//  0x7008
+	u32 sram_word2;		//  0x700C
+	u32 sram_word3;		//  0x7010
+	u32 sram_word4;		//  0x7014
+} MMC_t, *PMMC_t;
+
+/* END OF MMC REGISTER ADDRESS MAP */
+
+
+/* START OF EXP ROM REGISTER ADDRESS MAP */
+
+/*
+ * Expansion ROM Module of JAGCore Address Mapping
+ */
+
+/* Take this out until it is not empty */
+#if 0
+typedef struct _EXP_ROM_t {
+
+} EXP_ROM_t, *PEXP_ROM_t;
+#endif
+
+/* END OF EXP ROM REGISTER ADDRESS MAP */
+
+
+/*
+ * JAGCore Address Mapping
+ */
+typedef struct _ADDRESS_MAP_t {
+	GLOBAL_t global;
+	// unused section of global address map
+	u8 unused_global[4096 - sizeof(GLOBAL_t)];
+	TXDMA_t txdma;
+	// unused section of txdma address map
+	u8 unused_txdma[4096 - sizeof(TXDMA_t)];
+	RXDMA_t rxdma;
+	// unused section of rxdma address map
+	u8 unused_rxdma[4096 - sizeof(RXDMA_t)];
+	TXMAC_t txmac;
+	// unused section of txmac address map
+	u8 unused_txmac[4096 - sizeof(TXMAC_t)];
+	RXMAC_t rxmac;
+	// unused section of rxmac address map
+	u8 unused_rxmac[4096 - sizeof(RXMAC_t)];
+	MAC_t mac;
+	// unused section of mac address map
+	u8 unused_mac[4096 - sizeof(MAC_t)];
+	MAC_STAT_t macStat;
+	// unused section of mac stat address map
+	u8 unused_mac_stat[4096 - sizeof(MAC_STAT_t)];
+	MMC_t mmc;
+	// unused section of mmc address map
+	u8 unused_mmc[4096 - sizeof(MMC_t)];
+	// unused section of address map
+	u8 unused_[1015808];
+
+/* Take this out until it is not empty */
+#if 0
+	EXP_ROM_t exp_rom;
+#endif
+
+	u8 unused_exp_rom[4096];	// MGS-size TBD
+	u8 unused__[524288];	// unused section of address map
+} ADDRESS_MAP_t, *PADDRESS_MAP_t;
+
+#endif /* _ET1310_ADDRESS_MAP_H_ */

drivers/staging/et131x/et1310_eeprom.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_eeprom.c - Code used to access the device's EEPROM
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_eeprom.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+#include "et131x_isr.h"
+
+#include "et1310_tx.h"
+
+
+/*
+ * EEPROM Defines
+ */
+
+/* LBCIF Register Groups (addressed via 32-bit offsets) */
+#define LBCIF_DWORD0_GROUP_OFFSET       0xAC
+#define LBCIF_DWORD1_GROUP_OFFSET       0xB0
+
+/* LBCIF Registers (addressed via 8-bit offsets) */
+#define LBCIF_ADDRESS_REGISTER_OFFSET   0xAC
+#define LBCIF_DATA_REGISTER_OFFSET      0xB0
+#define LBCIF_CONTROL_REGISTER_OFFSET   0xB1
+#define LBCIF_STATUS_REGISTER_OFFSET    0xB2
+
+/* LBCIF Control Register Bits */
+#define LBCIF_CONTROL_SEQUENTIAL_READ   0x01
+#define LBCIF_CONTROL_PAGE_WRITE        0x02
+#define LBCIF_CONTROL_UNUSED1           0x04
+#define LBCIF_CONTROL_EEPROM_RELOAD     0x08
+#define LBCIF_CONTROL_UNUSED2           0x10
+#define LBCIF_CONTROL_TWO_BYTE_ADDR     0x20
+#define LBCIF_CONTROL_I2C_WRITE         0x40
+#define LBCIF_CONTROL_LBCIF_ENABLE      0x80
+
+/* LBCIF Status Register Bits */
+#define LBCIF_STATUS_PHY_QUEUE_AVAIL    0x01
+#define LBCIF_STATUS_I2C_IDLE           0x02
+#define LBCIF_STATUS_ACK_ERROR          0x04
+#define LBCIF_STATUS_GENERAL_ERROR      0x08
+#define LBCIF_STATUS_UNUSED             0x30
+#define LBCIF_STATUS_CHECKSUM_ERROR     0x40
+#define LBCIF_STATUS_EEPROM_PRESENT     0x80
+
+/* Miscellaneous Constraints */
+#define MAX_NUM_REGISTER_POLLS          1000
+#define MAX_NUM_WRITE_RETRIES           2
+
+/*
+ * Define macros that allow individual register values to be extracted from a
+ * DWORD1 register grouping
+ */
+#define EXTRACT_DATA_REGISTER(x)    (uint8_t)(x & 0xFF)
+#define EXTRACT_STATUS_REGISTER(x)  (uint8_t)((x >> 16) & 0xFF)
+#define EXTRACT_CONTROL_REG(x)      (uint8_t)((x >> 8) & 0xFF)
+
+/**
+ * EepromWriteByte - Write a byte to the ET1310's EEPROM
+ * @pAdapter: pointer to our private adapter structure
+ * @unAddress: the address to write
+ * @bData: the value to write
+ * @unEepronId: the ID of the EEPROM
+ * @unAddressingMode: how the EEPROM is to be accessed
+ *
+ * Returns SUCCESS or FAILURE
+ */
+int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress,
+			uint8_t bData, uint32_t unEepromId,
+			uint32_t unAddressingMode)
+{
+        struct pci_dev *pdev = pAdapter->pdev;
+	int32_t nIndex;
+	int32_t nRetries;
+	int32_t nError = false;
+	int32_t nI2CWriteActive = 0;
+	int32_t nWriteSuccessful = 0;
+	uint8_t bControl;
+	uint8_t bStatus = 0;
+	uint32_t unDword1 = 0;
+	uint32_t unData = 0;
+
+	/*
+	 * The following excerpt is from "Serial EEPROM HW Design
+	 * Specification" Version 0.92 (9/20/2004):
+	 *
+	 * Single Byte Writes
+	 *
+	 * For an EEPROM, an I2C single byte write is defined as a START
+	 * condition followed by the device address, EEPROM address, one byte
+	 * of data and a STOP condition.  The STOP condition will trigger the
+	 * EEPROM's internally timed write cycle to the nonvolatile memory.
+	 * All inputs are disabled during this write cycle and the EEPROM will
+	 * not respond to any access until the internal write is complete.
+	 * The steps to execute a single byte write are as follows:
+	 *
+	 * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and
+	 *    bits 7,1:0 both equal to 1, at least once after reset.
+	 *    Subsequent operations need only to check that bits 1:0 are
+	 *    equal to 1 prior to starting a single byte write.
+	 *
+	 * 2. Write to the LBCIF Control Register:  bit 7=1, bit 6=1, bit 3=0,
+	 *    and bits 1:0 both =0.  Bit 5 should be set according to the
+	 *    type of EEPROM being accessed (1=two byte addressing, 0=one
+	 *    byte addressing).
+	 *
+	 * 3. Write the address to the LBCIF Address Register.
+	 *
+	 * 4. Write the data to the LBCIF Data Register (the I2C write will
+	 *    begin).
+	 *
+	 * 5. Monitor bit 1:0 of the LBCIF Status Register.  When bits 1:0 are
+	 *    both equal to 1, the I2C write has completed and the internal
+	 *    write cycle of the EEPROM is about to start. (bits 1:0 = 01 is
+	 *    a legal state while waiting from both equal to 1, but bits
+	 *    1:0 = 10 is invalid and implies that something is broken).
+	 *
+	 * 6. Check bit 3 of the LBCIF Status Register.  If  equal to 1, an
+	 *    error has occurred.
+	 *
+	 * 7. Check bit 2 of the LBCIF Status Register.  If equal to 1 an ACK
+	 *    error has occurred on the address phase of the write.  This
+	 *    could be due to an actual hardware failure or the EEPROM may
+	 *    still be in its internal write cycle from a previous write.
+	 *    This write operation was ignored and must be repeated later.
+	 *
+	 * 8. Set bit 6 of the LBCIF Control Register = 0. If another write is
+	 *    required, go to step 1.
+	 */
+
+	/* Step 1: */
+	for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+		/* Read registers grouped in DWORD1 */
+		if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET,
+					  &unDword1)) {
+			nError = 1;
+			break;
+		}
+
+		bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+		if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL &&
+		    bStatus & LBCIF_STATUS_I2C_IDLE) {
+		    	/* bits 1:0 are equal to 1 */
+			break;
+		}
+	}
+
+	if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+		return FAILURE;
+	}
+
+	/* Step 2: */
+	bControl = 0;
+	bControl |= LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE;
+
+	if (unAddressingMode == DUAL_BYTE) {
+		bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR;
+	}
+
+	if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET,
+				  bControl)) {
+		return FAILURE;
+	}
+
+	nI2CWriteActive = 1;
+
+	/* Prepare EEPROM address for Step 3 */
+	unAddress |= (unAddressingMode == DUAL_BYTE) ?
+	    (unEepromId << 16) : (unEepromId << 8);
+
+	for (nRetries = 0; nRetries < MAX_NUM_WRITE_RETRIES; nRetries++) {
+		/* Step 3:*/
+		if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET,
+					   unAddress)) {
+			break;
+		}
+
+		/* Step 4: */
+		if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER_OFFSET,
+					  bData)) {
+			break;
+		}
+
+		/* Step 5: */
+		for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+			/* Read registers grouped in DWORD1 */
+			if (pci_read_config_dword(pdev,
+						  LBCIF_DWORD1_GROUP_OFFSET,
+						  &unDword1)) {
+				nError = 1;
+				break;
+			}
+
+			bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+			if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL &&
+			    bStatus & LBCIF_STATUS_I2C_IDLE) {
+			    	/* I2C write complete */
+				break;
+			}
+		}
+
+		if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+			break;
+		}
+
+		/*
+		 * Step 6: Don't break here if we are revision 1, this is
+		 *	   so we do a blind write for load bug.
+	         */
+		if (bStatus & LBCIF_STATUS_GENERAL_ERROR
+		    && pAdapter->RevisionID == 0) {
+			break;
+		}
+
+		/* Step 7 */
+		if (bStatus & LBCIF_STATUS_ACK_ERROR) {
+			/*
+			 * This could be due to an actual hardware failure
+			 * or the EEPROM may still be in its internal write
+			 * cycle from a previous write. This write operation
+			 * was ignored and must be repeated later.
+			 */
+			udelay(10);
+			continue;
+		}
+
+		nWriteSuccessful = 1;
+		break;
+	}
+
+	/* Step 8: */
+	udelay(10);
+	nIndex = 0;
+	while (nI2CWriteActive) {
+		bControl &= ~LBCIF_CONTROL_I2C_WRITE;
+
+		if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET,
+					  bControl)) {
+			nWriteSuccessful = 0;
+		}
+
+		/* Do read until internal ACK_ERROR goes away meaning write
+		 * completed
+		 */
+		do {
+			pci_write_config_dword(pdev,
+					       LBCIF_ADDRESS_REGISTER_OFFSET,
+					       unAddress);
+			do {
+				pci_read_config_dword(pdev,
+					LBCIF_DATA_REGISTER_OFFSET, &unData);
+			} while ((unData & 0x00010000) == 0);
+		} while (unData & 0x00040000);
+
+		bControl = EXTRACT_CONTROL_REG(unData);
+
+		if (bControl != 0xC0 || nIndex == 10000) {
+			break;
+		}
+
+		nIndex++;
+	}
+
+	return nWriteSuccessful ? SUCCESS : FAILURE;
+}
+
+/**
+ * EepromReadByte - Read a byte from the ET1310's EEPROM
+ * @pAdapter: pointer to our private adapter structure
+ * @unAddress: the address from which to read
+ * @pbData: a pointer to a byte in which to store the value of the read
+ * @unEepronId: the ID of the EEPROM
+ * @unAddressingMode: how the EEPROM is to be accessed
+ *
+ * Returns SUCCESS or FAILURE
+ */
+int32_t EepromReadByte(struct et131x_adapter *pAdapter, uint32_t unAddress,
+		       uint8_t *pbData, uint32_t unEepromId,
+		       uint32_t unAddressingMode)
+{
+        struct pci_dev *pdev = pAdapter->pdev;
+	int32_t nIndex;
+	int32_t nError = 0;
+	uint8_t bControl;
+	uint8_t bStatus = 0;
+	uint32_t unDword1 = 0;
+
+	/*
+	 * The following excerpt is from "Serial EEPROM HW Design
+	 * Specification" Version 0.92 (9/20/2004):
+	 *
+	 * Single Byte Reads
+	 *
+	 * A single byte read is similar to the single byte write, with the
+	 * exception of the data flow:
+	 *
+	 * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and
+	 *    bits 7,1:0 both equal to 1, at least once after reset.
+	 *    Subsequent operations need only to check that bits 1:0 are equal
+	 *    to 1 prior to starting a single byte read.
+	 *
+	 * 2. Write to the LBCIF Control Register:  bit 7=1, bit 6=0, bit 3=0,
+	 *    and bits 1:0 both =0.  Bit 5 should be set according to the type
+	 *    of EEPROM being accessed (1=two byte addressing, 0=one byte
+	 *    addressing).
+	 *
+	 * 3. Write the address to the LBCIF Address Register (I2C read will
+	 *    begin).
+	 *
+	 * 4. Monitor bit 0 of the LBCIF Status Register.  When =1, I2C read
+	 *    is complete. (if bit 1 =1 and bit 0 stays =0, a hardware failure
+	 *    has occurred).
+	 *
+	 * 5. Check bit 2 of the LBCIF Status Register.  If =1, then an error
+	 *    has occurred.  The data that has been returned from the PHY may
+	 *    be invalid.
+	 *
+	 * 6. Regardless of error status, read data byte from LBCIF Data
+	 *    Register.  If another byte is required, go to step 1.
+	 */
+
+	/* Step 1: */
+	for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+		/* Read registers grouped in DWORD1 */
+		if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET,
+					  &unDword1)) {
+			nError = 1;
+			break;
+		}
+
+		bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+		if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL &&
+		    bStatus & LBCIF_STATUS_I2C_IDLE) {
+			/* bits 1:0 are equal to 1 */
+			break;
+		}
+	}
+
+	if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+		return FAILURE;
+	}
+
+	/* Step 2: */
+	bControl = 0;
+	bControl |= LBCIF_CONTROL_LBCIF_ENABLE;
+
+	if (unAddressingMode == DUAL_BYTE) {
+		bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR;
+	}
+
+	if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET,
+				  bControl)) {
+		return FAILURE;
+	}
+
+	/* Step 3: */
+	unAddress |= (unAddressingMode == DUAL_BYTE) ?
+	    (unEepromId << 16) : (unEepromId << 8);
+
+	if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET,
+				   unAddress)) {
+		return FAILURE;
+	}
+
+	/* Step 4: */
+	for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+		/* Read registers grouped in DWORD1 */
+		if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET,
+					  &unDword1)) {
+			nError = 1;
+			break;
+		}
+
+		bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+		if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL
+		    && bStatus & LBCIF_STATUS_I2C_IDLE) {
+			/* I2C read complete */
+			break;
+		}
+	}
+
+	if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+		return FAILURE;
+	}
+
+	/* Step 6: */
+	*pbData = EXTRACT_DATA_REGISTER(unDword1);
+
+	return (bStatus & LBCIF_STATUS_ACK_ERROR) ? FAILURE : SUCCESS;
+}

drivers/staging/et131x/et1310_eeprom.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_eeprom.h - Defines, structs, enums, prototypes, etc. used for EEPROM
+ *                   access routines
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_EEPROM_H__
+#define __ET1310_EEPROM_H__
+
+#include "et1310_address_map.h"
+
+#ifndef SUCCESS
+#define SUCCESS		0
+#define FAILURE		1
+#endif
+
+#ifndef READ
+#define READ		0
+#define WRITE		1
+#endif
+
+#ifndef SINGLE_BYTE
+#define SINGLE_BYTE	0
+#define DUAL_BYTE	1
+#endif
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+int32_t EepromWriteByte(struct et131x_adapter *adapter, u32 unAddress,
+			u8 bData, u32 unEepromId,
+			u32 unAddressingMode);
+int32_t EepromReadByte(struct et131x_adapter *adapter, u32 unAddress,
+		       u8 *pbData, u32 unEepromId,
+		       u32 unAddressingMode);
+
+#endif /* _ET1310_EEPROM_H_ */

drivers/staging/et131x/et1310_jagcore.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * ConfigGlobalRegs - Used to configure the global registers on the JAGCore
+ * @pAdpater: pointer to our adapter structure
+ */
+void ConfigGlobalRegs(struct et131x_adapter *pAdapter)
+{
+	struct _GLOBAL_t __iomem *pGbl = &pAdapter->CSRAddress->global;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	if (pAdapter->RegistryPhyLoopbk == false) {
+		if (pAdapter->RegistryJumboPacket < 2048) {
+			/* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
+			 * block of RAM that the driver can split between Tx
+			 * and Rx as it desires.  Our default is to split it
+			 * 50/50:
+			 */
+			writel(0, &pGbl->rxq_start_addr.value);
+			writel(pAdapter->RegistryRxMemEnd,
+			       &pGbl->rxq_end_addr.value);
+			writel(pAdapter->RegistryRxMemEnd + 1,
+			       &pGbl->txq_start_addr.value);
+			writel(INTERNAL_MEM_SIZE - 1,
+			       &pGbl->txq_end_addr.value);
+		} else if (pAdapter->RegistryJumboPacket < 8192) {
+			/* For jumbo packets > 2k but < 8k, split 50-50. */
+			writel(0, &pGbl->rxq_start_addr.value);
+			writel(INTERNAL_MEM_RX_OFFSET,
+			       &pGbl->rxq_end_addr.value);
+			writel(INTERNAL_MEM_RX_OFFSET + 1,
+			       &pGbl->txq_start_addr.value);
+			writel(INTERNAL_MEM_SIZE - 1,
+			       &pGbl->txq_end_addr.value);
+		} else {
+			/* 9216 is the only packet size greater than 8k that
+			 * is available. The Tx buffer has to be big enough
+			 * for one whole packet on the Tx side. We'll make
+			 * the Tx 9408, and give the rest to Rx
+			 */
+			writel(0x0000, &pGbl->rxq_start_addr.value);
+			writel(0x01b3, &pGbl->rxq_end_addr.value);
+			writel(0x01b4, &pGbl->txq_start_addr.value);
+			writel(INTERNAL_MEM_SIZE - 1,
+			       &pGbl->txq_end_addr.value);
+		}
+
+		/* Initialize the loopback register. Disable all loopbacks. */
+		writel(0, &pGbl->loopback.value);
+	} else {
+		/* For PHY Line loopback, the memory is configured as if Tx
+		 * and Rx both have all the memory.  This is because the
+		 * RxMAC will write data into the space, and the TxMAC will
+		 * read it out.
+		 */
+		writel(0, &pGbl->rxq_start_addr.value);
+		writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value);
+		writel(0, &pGbl->txq_start_addr.value);
+		writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value);
+
+		/* Initialize the loopback register (MAC loopback). */
+		writel(1, &pGbl->loopback.value);
+	}
+
+	/* MSI Register */
+	writel(0, &pGbl->msi_config.value);
+
+	/* By default, disable the watchdog timer.  It will be enabled when
+	 * a packet is queued.
+	 */
+	writel(0, &pGbl->watchdog_timer);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore
+ * @pAdapter: pointer to our adapter structure
+ */
+void ConfigMMCRegs(struct et131x_adapter *pAdapter)
+{
+	MMC_CTRL_t mmc_ctrl = { 0 };
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* All we need to do is initialize the Memory Control Register */
+	mmc_ctrl.bits.force_ce = 0x0;
+	mmc_ctrl.bits.rxdma_disable = 0x0;
+	mmc_ctrl.bits.txdma_disable = 0x0;
+	mmc_ctrl.bits.txmac_disable = 0x0;
+	mmc_ctrl.bits.rxmac_disable = 0x0;
+	mmc_ctrl.bits.arb_disable = 0x0;
+	mmc_ctrl.bits.mmc_enable = 0x1;
+
+	writel(mmc_ctrl.value, &pAdapter->CSRAddress->mmc.mmc_ctrl.value);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void et131x_enable_interrupts(struct et131x_adapter *adapter)
+{
+	uint32_t MaskValue;
+
+	/* Enable all global interrupts */
+	if ((adapter->FlowControl == TxOnly) || (adapter->FlowControl == Both)) {
+		MaskValue = INT_MASK_ENABLE;
+	} else {
+		MaskValue = INT_MASK_ENABLE_NO_FLOW;
+	}
+
+	if (adapter->DriverNoPhyAccess) {
+		MaskValue |= 0x10000;
+	}
+
+	adapter->CachedMaskValue.value = MaskValue;
+	writel(MaskValue, &adapter->CSRAddress->global.int_mask.value);
+}
+
+void et131x_disable_interrupts(struct et131x_adapter * adapter)
+{
+	/* Disable all global interrupts */
+	adapter->CachedMaskValue.value = INT_MASK_DISABLE;
+	writel(INT_MASK_DISABLE, &adapter->CSRAddress->global.int_mask.value);
+}

drivers/staging/et131x/et1310_jagcore.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_jagcore.h - Defines, structs, enums, prototypes, etc. pertaining to
+ *                    the JAGCore
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_JAGCORE_H__
+#define __ET1310_JAGCORE_H__
+
+#include "et1310_address_map.h"
+
+
+#define INTERNAL_MEM_SIZE       0x400	//1024 of internal memory
+#define INTERNAL_MEM_RX_OFFSET  0x1FF	//50%   Tx, 50%   Rx
+
+#define REGS_MAX_ARRAY          4096
+
+/*
+ * For interrupts, normal running is:
+ *       rxdma_xfr_done, phy_interrupt, mac_stat_interrupt,
+ *       watchdog_interrupt & txdma_xfer_done
+ *
+ * In both cases, when flow control is enabled for either Tx or bi-direction,
+ * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the
+ * buffer rings are running low.
+ */
+#define INT_MASK_DISABLE            0xffffffff
+
+// NOTE: Masking out MAC_STAT Interrupt for now...
+//#define INT_MASK_ENABLE             0xfff6bf17
+//#define INT_MASK_ENABLE_NO_FLOW     0xfff6bfd7
+#define INT_MASK_ENABLE             0xfffebf17
+#define INT_MASK_ENABLE_NO_FLOW     0xfffebfd7
+
+/* DATA STRUCTURES FOR DIRECT REGISTER ACCESS */
+
+typedef struct {
+	u8 bReadWrite;
+	u32 nRegCount;
+	u32 nData[REGS_MAX_ARRAY];
+	u32 nOffsets[REGS_MAX_ARRAY];
+} JAGCORE_ACCESS_REGS, *PJAGCORE_ACCESS_REGS;
+
+typedef struct {
+	u8 bReadWrite;
+	u32 nDataWidth;
+	u32 nRegCount;
+	u32 nOffsets[REGS_MAX_ARRAY];
+	u32 nData[REGS_MAX_ARRAY];
+} PCI_CFG_SPACE_REGS, *PPCI_CFG_SPACE_REGS;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void ConfigGlobalRegs(struct et131x_adapter *pAdapter);
+void ConfigMMCRegs(struct et131x_adapter *pAdapter);
+void et131x_enable_interrupts(struct et131x_adapter *adapter);
+void et131x_disable_interrupts(struct et131x_adapter *adapter);
+
+#endif /* __ET1310_JAGCORE_H__ */

drivers/staging/et131x/et1310_mac.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_mac.c - All code and routines pertaining to the MAC
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * ConfigMacRegs1 - Initialize the first part of MAC regs
+ * @pAdpater: pointer to our adapter structure
+ */
+void ConfigMACRegs1(struct et131x_adapter *pAdapter)
+{
+	struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac;
+	MAC_STATION_ADDR1_t station1;
+	MAC_STATION_ADDR2_t station2;
+	MAC_IPG_t ipg;
+	MAC_HFDP_t hfdp;
+	MII_MGMT_CFG_t mii_mgmt_cfg;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* First we need to reset everything.  Write to MAC configuration
+	 * register 1 to perform reset.
+	 */
+	writel(0xC00F0000, &pMac->cfg1.value);
+
+	/* Next lets configure the MAC Inter-packet gap register */
+	ipg.bits.non_B2B_ipg_1 = 0x38;		// 58d
+	ipg.bits.non_B2B_ipg_2 = 0x58;		// 88d
+	ipg.bits.min_ifg_enforce = 0x50;	// 80d
+	ipg.bits.B2B_ipg = 0x60;		// 96d
+	writel(ipg.value, &pMac->ipg.value);
+
+	/* Next lets configure the MAC Half Duplex register */
+	hfdp.bits.alt_beb_trunc = 0xA;
+	hfdp.bits.alt_beb_enable = 0x0;
+	hfdp.bits.bp_no_backoff = 0x0;
+	hfdp.bits.no_backoff = 0x0;
+	hfdp.bits.excess_defer = 0x1;
+	hfdp.bits.rexmit_max = 0xF;
+	hfdp.bits.coll_window = 0x37;		// 55d
+	writel(hfdp.value, &pMac->hfdp.value);
+
+	/* Next lets configure the MAC Interface Control register */
+	writel(0, &pMac->if_ctrl.value);
+
+	/* Let's move on to setting up the mii managment configuration */
+	mii_mgmt_cfg.bits.reset_mii_mgmt = 0;
+	mii_mgmt_cfg.bits.scan_auto_incremt = 0;
+	mii_mgmt_cfg.bits.preamble_suppress = 0;
+	mii_mgmt_cfg.bits.mgmt_clk_reset = 0x7;
+	writel(mii_mgmt_cfg.value, &pMac->mii_mgmt_cfg.value);
+
+	/* Next lets configure the MAC Station Address register.  These
+	 * values are read from the EEPROM during initialization and stored
+	 * in the adapter structure.  We write what is stored in the adapter
+	 * structure to the MAC Station Address registers high and low.  This
+	 * station address is used for generating and checking pause control
+	 * packets.
+	 */
+	station2.bits.Octet1 = pAdapter->CurrentAddress[0];
+	station2.bits.Octet2 = pAdapter->CurrentAddress[1];
+	station1.bits.Octet3 = pAdapter->CurrentAddress[2];
+	station1.bits.Octet4 = pAdapter->CurrentAddress[3];
+	station1.bits.Octet5 = pAdapter->CurrentAddress[4];
+	station1.bits.Octet6 = pAdapter->CurrentAddress[5];
+	writel(station1.value, &pMac->station_addr_1.value);
+	writel(station2.value, &pMac->station_addr_2.value);
+
+	/* Max ethernet packet in bytes that will passed by the mac without
+	 * being truncated.  Allow the MAC to pass 4 more than our max packet
+	 * size.  This is 4 for the Ethernet CRC.
+	 *
+	 * Packets larger than (RegistryJumboPacket) that do not contain a
+	 * VLAN ID will be dropped by the Rx function.
+	 */
+	writel(pAdapter->RegistryJumboPacket + 4, &pMac->max_fm_len.value);
+
+	/* clear out MAC config reset */
+	writel(0, &pMac->cfg1.value);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * ConfigMacRegs2 - Initialize the second part of MAC regs
+ * @pAdpater: pointer to our adapter structure
+ */
+void ConfigMACRegs2(struct et131x_adapter *pAdapter)
+{
+	int32_t delay = 0;
+	struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac;
+	MAC_CFG1_t cfg1;
+	MAC_CFG2_t cfg2;
+	MAC_IF_CTRL_t ifctrl;
+	TXMAC_CTL_t ctl;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	ctl.value = readl(&pAdapter->CSRAddress->txmac.ctl.value);
+	cfg1.value = readl(&pMac->cfg1.value);
+	cfg2.value = readl(&pMac->cfg2.value);
+	ifctrl.value = readl(&pMac->if_ctrl.value);
+
+	if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+		cfg2.bits.if_mode = 0x2;
+		ifctrl.bits.phy_mode = 0x0;
+	} else {
+		cfg2.bits.if_mode = 0x1;
+		ifctrl.bits.phy_mode = 0x1;
+	}
+
+	/* We need to enable Rx/Tx */
+	cfg1.bits.rx_enable = 0x1;
+	cfg1.bits.tx_enable = 0x1;
+
+	/* Set up flow control */
+	cfg1.bits.tx_flow = 0x1;
+
+	if ((pAdapter->FlowControl == RxOnly) ||
+	    (pAdapter->FlowControl == Both)) {
+		cfg1.bits.rx_flow = 0x1;
+	} else {
+		cfg1.bits.rx_flow = 0x0;
+	}
+
+	/* Initialize loop back to off */
+	cfg1.bits.loop_back = 0;
+
+	writel(cfg1.value, &pMac->cfg1.value);
+
+	/* Now we need to initialize the MAC Configuration 2 register */
+	cfg2.bits.preamble_len = 0x7;
+	cfg2.bits.huge_frame = 0x0;
+	/* LENGTH FIELD CHECKING bit4: Set this bit to cause the MAC to check
+	 * the frame's length field to ensure it matches the actual data
+	 * field length. Clear this bit if no length field checking is
+	 * desired. Its default is 0.
+	 */
+	cfg2.bits.len_check = 0x1;
+
+	if (pAdapter->RegistryPhyLoopbk == false) {
+		cfg2.bits.pad_crc = 0x1;
+		cfg2.bits.crc_enable = 0x1;
+	} else {
+		cfg2.bits.pad_crc = 0;
+		cfg2.bits.crc_enable = 0;
+	}
+
+	/* 1 - full duplex, 0 - half-duplex */
+	cfg2.bits.full_duplex = pAdapter->uiDuplexMode;
+	ifctrl.bits.ghd_mode = !pAdapter->uiDuplexMode;
+
+	writel(ifctrl.value, &pMac->if_ctrl.value);
+	writel(cfg2.value, &pMac->cfg2.value);
+
+	do {
+		udelay(10);
+		delay++;
+		cfg1.value = readl(&pMac->cfg1.value);
+	} while ((!cfg1.bits.syncd_rx_en ||
+		  !cfg1.bits.syncd_tx_en) &&
+		 delay < 100);
+
+	if (delay == 100) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Syncd bits did not respond correctly cfg1 word 0x%08x\n",
+			  cfg1.value);
+	}
+
+	DBG_TRACE(et131x_dbginfo,
+		  "Speed %d, Dup %d, CFG1 0x%08x, CFG2 0x%08x, if_ctrl 0x%08x\n",
+		  pAdapter->uiLinkSpeed, pAdapter->uiDuplexMode,
+		  readl(&pMac->cfg1.value), readl(&pMac->cfg2.value),
+		  readl(&pMac->if_ctrl.value));
+
+	/* Enable TXMAC */
+	ctl.bits.txmac_en = 0x1;
+	ctl.bits.fc_disable = 0x1;
+	writel(ctl.value, &pAdapter->CSRAddress->txmac.ctl.value);
+
+	/* Ready to start the RXDMA/TXDMA engine */
+	if (!MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER)) {
+		et131x_rx_dma_enable(pAdapter);
+		et131x_tx_dma_enable(pAdapter);
+	} else {
+		DBG_WARNING(et131x_dbginfo,
+			    "Didn't enable Rx/Tx due to low-power mode\n");
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigRxMacRegs(struct et131x_adapter *pAdapter)
+{
+	struct _RXMAC_t __iomem *pRxMac = &pAdapter->CSRAddress->rxmac;
+	RXMAC_WOL_SA_LO_t sa_lo;
+	RXMAC_WOL_SA_HI_t sa_hi;
+	RXMAC_PF_CTRL_t pf_ctrl = { 0 };
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Disable the MAC while it is being configured (also disable WOL) */
+	writel(0x8, &pRxMac->ctrl.value);
+
+	/* Initialize WOL to disabled. */
+	writel(0, &pRxMac->crc0.value);
+	writel(0, &pRxMac->crc12.value);
+	writel(0, &pRxMac->crc34.value);
+
+	/* We need to set the WOL mask0 - mask4 next.  We initialize it to
+	 * its default Values of 0x00000000 because there are not WOL masks
+	 * as of this time.
+	 */
+	writel(0, &pRxMac->mask0_word0);
+	writel(0, &pRxMac->mask0_word1);
+	writel(0, &pRxMac->mask0_word2);
+	writel(0, &pRxMac->mask0_word3);
+
+	writel(0, &pRxMac->mask1_word0);
+	writel(0, &pRxMac->mask1_word1);
+	writel(0, &pRxMac->mask1_word2);
+	writel(0, &pRxMac->mask1_word3);
+
+	writel(0, &pRxMac->mask2_word0);
+	writel(0, &pRxMac->mask2_word1);
+	writel(0, &pRxMac->mask2_word2);
+	writel(0, &pRxMac->mask2_word3);
+
+	writel(0, &pRxMac->mask3_word0);
+	writel(0, &pRxMac->mask3_word1);
+	writel(0, &pRxMac->mask3_word2);
+	writel(0, &pRxMac->mask3_word3);
+
+	writel(0, &pRxMac->mask4_word0);
+	writel(0, &pRxMac->mask4_word1);
+	writel(0, &pRxMac->mask4_word2);
+	writel(0, &pRxMac->mask4_word3);
+
+	/* Lets setup the WOL Source Address */
+	sa_lo.bits.sa3 = pAdapter->CurrentAddress[2];
+	sa_lo.bits.sa4 = pAdapter->CurrentAddress[3];
+	sa_lo.bits.sa5 = pAdapter->CurrentAddress[4];
+	sa_lo.bits.sa6 = pAdapter->CurrentAddress[5];
+	writel(sa_lo.value, &pRxMac->sa_lo.value);
+
+	sa_hi.bits.sa1 = pAdapter->CurrentAddress[0];
+	sa_hi.bits.sa2 = pAdapter->CurrentAddress[1];
+	writel(sa_hi.value, &pRxMac->sa_hi.value);
+
+	/* Disable all Packet Filtering */
+	writel(0, &pRxMac->pf_ctrl.value);
+
+	/* Let's initialize the Unicast Packet filtering address */
+	if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) {
+		SetupDeviceForUnicast(pAdapter);
+		pf_ctrl.bits.filter_uni_en = 1;
+	} else {
+		writel(0, &pRxMac->uni_pf_addr1.value);
+		writel(0, &pRxMac->uni_pf_addr2.value);
+		writel(0, &pRxMac->uni_pf_addr3.value);
+	}
+
+	/* Let's initialize the Multicast hash */
+	if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
+		pf_ctrl.bits.filter_multi_en = 0;
+	} else {
+		pf_ctrl.bits.filter_multi_en = 1;
+		SetupDeviceForMulticast(pAdapter);
+	}
+
+	/* Runt packet filtering.  Didn't work in version A silicon. */
+	pf_ctrl.bits.min_pkt_size = NIC_MIN_PACKET_SIZE + 4;
+	pf_ctrl.bits.filter_frag_en = 1;
+
+	if (pAdapter->RegistryJumboPacket > 8192) {
+		RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg;
+
+		/* In order to transmit jumbo packets greater than 8k, the
+		 * FIFO between RxMAC and RxDMA needs to be reduced in size
+		 * to (16k - Jumbo packet size).  In order to implement this,
+		 * we must use "cut through" mode in the RxMAC, which chops
+		 * packets down into segments which are (max_size * 16).  In
+		 * this case we selected 256 bytes, since this is the size of
+		 * the PCI-Express TLP's that the 1310 uses.
+		 */
+		mcif_ctrl_max_seg.bits.seg_en = 0x1;
+		mcif_ctrl_max_seg.bits.fc_en = 0x0;
+		mcif_ctrl_max_seg.bits.max_size = 0x10;
+
+		writel(mcif_ctrl_max_seg.value,
+		       &pRxMac->mcif_ctrl_max_seg.value);
+	} else {
+		writel(0, &pRxMac->mcif_ctrl_max_seg.value);
+	}
+
+	/* Initialize the MCIF water marks */
+	writel(0, &pRxMac->mcif_water_mark.value);
+
+	/*  Initialize the MIF control */
+	writel(0, &pRxMac->mif_ctrl.value);
+
+	/* Initialize the Space Available Register */
+	writel(0, &pRxMac->space_avail.value);
+
+	/* Initialize the the mif_ctrl register
+	 * bit 3:  Receive code error. One or more nibbles were signaled as
+	 *	   errors  during the reception of the packet.  Clear this
+	 *	   bit in Gigabit, set it in 100Mbit.  This was derived
+	 *	   experimentally at UNH.
+	 * bit 4:  Receive CRC error. The packet's CRC did not match the
+	 *	   internally generated CRC.
+	 * bit 5:  Receive length check error. Indicates that frame length
+	 *	   field value in the packet does not match the actual data
+	 *	   byte length and is not a type field.
+	 * bit 16: Receive frame truncated.
+	 * bit 17: Drop packet enable
+	 */
+	if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) {
+		writel(0x30038, &pRxMac->mif_ctrl.value);
+	} else {
+		writel(0x30030, &pRxMac->mif_ctrl.value);
+	}
+
+	/* Finally we initialize RxMac to be enabled & WOL disabled.  Packet
+	 * filter is always enabled since it is where the runt packets are
+	 * supposed to be dropped.  For version A silicon, runt packet
+	 * dropping doesn't work, so it is disabled in the pf_ctrl register,
+	 * but we still leave the packet filter on.
+	 */
+	writel(pf_ctrl.value, &pRxMac->pf_ctrl.value);
+	writel(0x9, &pRxMac->ctrl.value);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigTxMacRegs(struct et131x_adapter *pAdapter)
+{
+	struct _TXMAC_t __iomem *pTxMac = &pAdapter->CSRAddress->txmac;
+	TXMAC_CF_PARAM_t Local;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* We need to update the Control Frame Parameters
+	 * cfpt - control frame pause timer set to 64 (0x40)
+	 * cfep - control frame extended pause timer set to 0x0
+	 */
+	if (pAdapter->FlowControl == None) {
+		writel(0, &pTxMac->cf_param.value);
+	} else {
+		Local.bits.cfpt = 0x40;
+		Local.bits.cfep = 0x0;
+		writel(Local.value, &pTxMac->cf_param.value);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigMacStatRegs(struct et131x_adapter *pAdapter)
+{
+	struct _MAC_STAT_t __iomem *pDevMacStat =
+		&pAdapter->CSRAddress->macStat;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Next we need to initialize all the MAC_STAT registers to zero on
+	 * the device.
+	 */
+	writel(0, &pDevMacStat->RFcs);
+	writel(0, &pDevMacStat->RAln);
+	writel(0, &pDevMacStat->RFlr);
+	writel(0, &pDevMacStat->RDrp);
+	writel(0, &pDevMacStat->RCde);
+	writel(0, &pDevMacStat->ROvr);
+	writel(0, &pDevMacStat->RFrg);
+
+	writel(0, &pDevMacStat->TScl);
+	writel(0, &pDevMacStat->TDfr);
+	writel(0, &pDevMacStat->TMcl);
+	writel(0, &pDevMacStat->TLcl);
+	writel(0, &pDevMacStat->TNcl);
+	writel(0, &pDevMacStat->TOvr);
+	writel(0, &pDevMacStat->TUnd);
+
+	/* Unmask any counters that we want to track the overflow of.
+	 * Initially this will be all counters.  It may become clear later
+	 * that we do not need to track all counters.
+	 */
+	{
+		MAC_STAT_REG_1_t Carry1M = { 0xffffffff };
+
+		Carry1M.bits.rdrp = 0;
+		Carry1M.bits.rjbr = 1;
+		Carry1M.bits.rfrg = 0;
+		Carry1M.bits.rovr = 0;
+		Carry1M.bits.rund = 1;
+		Carry1M.bits.rcse = 1;
+		Carry1M.bits.rcde = 0;
+		Carry1M.bits.rflr = 0;
+		Carry1M.bits.raln = 0;
+		Carry1M.bits.rxuo = 1;
+		Carry1M.bits.rxpf = 1;
+		Carry1M.bits.rxcf = 1;
+		Carry1M.bits.rbca = 1;
+		Carry1M.bits.rmca = 1;
+		Carry1M.bits.rfcs = 0;
+		Carry1M.bits.rpkt = 1;
+		Carry1M.bits.rbyt = 1;
+		Carry1M.bits.trmgv = 1;
+		Carry1M.bits.trmax = 1;
+		Carry1M.bits.tr1k = 1;
+		Carry1M.bits.tr511 = 1;
+		Carry1M.bits.tr255 = 1;
+		Carry1M.bits.tr127 = 1;
+		Carry1M.bits.tr64 = 1;
+
+		writel(Carry1M.value, &pDevMacStat->Carry1M.value);
+	}
+
+	{
+		MAC_STAT_REG_2_t Carry2M = { 0xffffffff };
+
+		Carry2M.bits.tdrp = 1;
+		Carry2M.bits.tpfh = 1;
+		Carry2M.bits.tncl = 0;
+		Carry2M.bits.txcl = 1;
+		Carry2M.bits.tlcl = 0;
+		Carry2M.bits.tmcl = 0;
+		Carry2M.bits.tscl = 0;
+		Carry2M.bits.tedf = 1;
+		Carry2M.bits.tdfr = 0;
+		Carry2M.bits.txpf = 1;
+		Carry2M.bits.tbca = 1;
+		Carry2M.bits.tmca = 1;
+		Carry2M.bits.tpkt = 1;
+		Carry2M.bits.tbyt = 1;
+		Carry2M.bits.tfrg = 1;
+		Carry2M.bits.tund = 0;
+		Carry2M.bits.tovr = 0;
+		Carry2M.bits.txcf = 1;
+		Carry2M.bits.tfcs = 1;
+		Carry2M.bits.tjbr = 1;
+
+		writel(Carry2M.value, &pDevMacStat->Carry2M.value);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigFlowControl(struct et131x_adapter * pAdapter)
+{
+	if (pAdapter->uiDuplexMode == 0) {
+		pAdapter->FlowControl = None;
+	} else {
+		char RemotePause, RemoteAsyncPause;
+
+		ET1310_PhyAccessMiBit(pAdapter,
+				      TRUEPHY_BIT_READ, 5, 10, &RemotePause);
+		ET1310_PhyAccessMiBit(pAdapter,
+				      TRUEPHY_BIT_READ, 5, 11,
+				      &RemoteAsyncPause);
+
+		if ((RemotePause == TRUEPHY_BIT_SET) &&
+		    (RemoteAsyncPause == TRUEPHY_BIT_SET)) {
+			pAdapter->FlowControl = pAdapter->RegistryFlowControl;
+		} else if ((RemotePause == TRUEPHY_BIT_SET) &&
+			   (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) {
+			if (pAdapter->RegistryFlowControl == Both) {
+				pAdapter->FlowControl = Both;
+			} else {
+				pAdapter->FlowControl = None;
+			}
+		} else if ((RemotePause == TRUEPHY_BIT_CLEAR) &&
+			   (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) {
+			pAdapter->FlowControl = None;
+		} else {/* if (RemotePause == TRUEPHY_CLEAR_BIT &&
+			       RemoteAsyncPause == TRUEPHY_SET_BIT) */
+			if (pAdapter->RegistryFlowControl == Both) {
+				pAdapter->FlowControl = RxOnly;
+			} else {
+				pAdapter->FlowControl = None;
+			}
+		}
+	}
+}
+
+/**
+ * UpdateMacStatHostCounters - Update the local copy of the statistics
+ * @pAdapter: pointer to the adapter structure
+ */
+void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter)
+{
+	struct _ce_stats_t *stats = &pAdapter->Stats;
+	struct _MAC_STAT_t __iomem *pDevMacStat =
+		&pAdapter->CSRAddress->macStat;
+
+	stats->collisions += readl(&pDevMacStat->TNcl);
+	stats->first_collision += readl(&pDevMacStat->TScl);
+	stats->tx_deferred += readl(&pDevMacStat->TDfr);
+	stats->excessive_collisions += readl(&pDevMacStat->TMcl);
+	stats->late_collisions += readl(&pDevMacStat->TLcl);
+	stats->tx_uflo += readl(&pDevMacStat->TUnd);
+	stats->max_pkt_error += readl(&pDevMacStat->TOvr);
+
+	stats->alignment_err += readl(&pDevMacStat->RAln);
+	stats->crc_err += readl(&pDevMacStat->RCde);
+	stats->norcvbuf += readl(&pDevMacStat->RDrp);
+	stats->rx_ov_flow += readl(&pDevMacStat->ROvr);
+	stats->code_violations += readl(&pDevMacStat->RFcs);
+	stats->length_err += readl(&pDevMacStat->RFlr);
+
+	stats->other_errors += readl(&pDevMacStat->RFrg);
+}
+
+/**
+ * HandleMacStatInterrupt
+ * @pAdapter: pointer to the adapter structure
+ *
+ * One of the MACSTAT counters has wrapped.  Update the local copy of
+ * the statistics held in the adapter structure, checking the "wrap"
+ * bit for each counter.
+ */
+void HandleMacStatInterrupt(struct et131x_adapter *pAdapter)
+{
+	MAC_STAT_REG_1_t Carry1;
+	MAC_STAT_REG_2_t Carry2;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Read the interrupt bits from the register(s).  These are Clear On
+	 * Write.
+	 */
+	Carry1.value = readl(&pAdapter->CSRAddress->macStat.Carry1.value);
+	Carry2.value = readl(&pAdapter->CSRAddress->macStat.Carry2.value);
+
+	writel(Carry1.value, &pAdapter->CSRAddress->macStat.Carry1.value);
+	writel(Carry2.value, &pAdapter->CSRAddress->macStat.Carry2.value);
+
+	/* We need to do update the host copy of all the MAC_STAT counters.
+	 * For each counter, check it's overflow bit.  If the overflow bit is
+	 * set, then increment the host version of the count by one complete
+	 * revolution of the counter.  This routine is called when the counter
+	 * block indicates that one of the counters has wrapped.
+	 */
+	if (Carry1.bits.rfcs) {
+		pAdapter->Stats.code_violations += COUNTER_WRAP_16_BIT;
+	}
+	if (Carry1.bits.raln) {
+		pAdapter->Stats.alignment_err += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry1.bits.rflr) {
+		pAdapter->Stats.length_err += COUNTER_WRAP_16_BIT;
+	}
+	if (Carry1.bits.rfrg) {
+		pAdapter->Stats.other_errors += COUNTER_WRAP_16_BIT;
+	}
+	if (Carry1.bits.rcde) {
+		pAdapter->Stats.crc_err += COUNTER_WRAP_16_BIT;
+	}
+	if (Carry1.bits.rovr) {
+		pAdapter->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT;
+	}
+	if (Carry1.bits.rdrp) {
+		pAdapter->Stats.norcvbuf += COUNTER_WRAP_16_BIT;
+	}
+	if (Carry2.bits.tovr) {
+		pAdapter->Stats.max_pkt_error += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry2.bits.tund) {
+		pAdapter->Stats.tx_uflo += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry2.bits.tscl) {
+		pAdapter->Stats.first_collision += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry2.bits.tdfr) {
+		pAdapter->Stats.tx_deferred += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry2.bits.tmcl) {
+		pAdapter->Stats.excessive_collisions += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry2.bits.tlcl) {
+		pAdapter->Stats.late_collisions += COUNTER_WRAP_12_BIT;
+	}
+	if (Carry2.bits.tncl) {
+		pAdapter->Stats.collisions += COUNTER_WRAP_12_BIT;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void SetupDeviceForMulticast(struct et131x_adapter *pAdapter)
+{
+	struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac;
+	uint32_t nIndex;
+	uint32_t result;
+	uint32_t hash1 = 0;
+	uint32_t hash2 = 0;
+	uint32_t hash3 = 0;
+	uint32_t hash4 = 0;
+	PM_CSR_t pm_csr;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision
+	 * the multi-cast LIST.  If it is NOT specified, (and "ALL" is not
+	 * specified) then we should pass NO multi-cast addresses to the
+	 * driver.
+	 */
+	if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) {
+		DBG_VERBOSE(et131x_dbginfo,
+			    "MULTICAST flag is set, MCCount: %d\n",
+			    pAdapter->MCAddressCount);
+
+		/* Loop through our multicast array and set up the device */
+		for (nIndex = 0; nIndex < pAdapter->MCAddressCount; nIndex++) {
+			DBG_VERBOSE(et131x_dbginfo,
+				    "MCList[%d]: %02x:%02x:%02x:%02x:%02x:%02x\n",
+				    nIndex,
+				    pAdapter->MCList[nIndex][0],
+				    pAdapter->MCList[nIndex][1],
+				    pAdapter->MCList[nIndex][2],
+				    pAdapter->MCList[nIndex][3],
+				    pAdapter->MCList[nIndex][4],
+				    pAdapter->MCList[nIndex][5]);
+
+			result = ether_crc(6, pAdapter->MCList[nIndex]);
+
+			result = (result & 0x3F800000) >> 23;
+
+			if (result < 32) {
+				hash1 |= (1 << result);
+			} else if ((31 < result) && (result < 64)) {
+				result -= 32;
+				hash2 |= (1 << result);
+			} else if ((63 < result) && (result < 96)) {
+				result -= 64;
+				hash3 |= (1 << result);
+			} else {
+				result -= 96;
+				hash4 |= (1 << result);
+			}
+		}
+	}
+
+	/* Write out the new hash to the device */
+	pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+	if (pm_csr.bits.pm_phy_sw_coma == 0) {
+		writel(hash1, &rxmac->multi_hash1);
+		writel(hash2, &rxmac->multi_hash2);
+		writel(hash3, &rxmac->multi_hash3);
+		writel(hash4, &rxmac->multi_hash4);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+void SetupDeviceForUnicast(struct et131x_adapter *pAdapter)
+{
+	struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac;
+	RXMAC_UNI_PF_ADDR1_t uni_pf1;
+	RXMAC_UNI_PF_ADDR2_t uni_pf2;
+	RXMAC_UNI_PF_ADDR3_t uni_pf3;
+	PM_CSR_t pm_csr;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Set up unicast packet filter reg 3 to be the first two octets of
+	 * the MAC address for both address
+	 *
+	 * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the
+	 * MAC address for second address
+	 *
+	 * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
+	 * MAC address for first address
+	 */
+	uni_pf3.bits.addr1_1 = pAdapter->CurrentAddress[0];
+	uni_pf3.bits.addr1_2 = pAdapter->CurrentAddress[1];
+	uni_pf3.bits.addr2_1 = pAdapter->CurrentAddress[0];
+	uni_pf3.bits.addr2_2 = pAdapter->CurrentAddress[1];
+
+	uni_pf2.bits.addr2_3 = pAdapter->CurrentAddress[2];
+	uni_pf2.bits.addr2_4 = pAdapter->CurrentAddress[3];
+	uni_pf2.bits.addr2_5 = pAdapter->CurrentAddress[4];
+	uni_pf2.bits.addr2_6 = pAdapter->CurrentAddress[5];
+
+	uni_pf1.bits.addr1_3 = pAdapter->CurrentAddress[2];
+	uni_pf1.bits.addr1_4 = pAdapter->CurrentAddress[3];
+	uni_pf1.bits.addr1_5 = pAdapter->CurrentAddress[4];
+	uni_pf1.bits.addr1_6 = pAdapter->CurrentAddress[5];
+
+	pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+	if (pm_csr.bits.pm_phy_sw_coma == 0) {
+		writel(uni_pf1.value, &rxmac->uni_pf_addr1.value);
+		writel(uni_pf2.value, &rxmac->uni_pf_addr2.value);
+		writel(uni_pf3.value, &rxmac->uni_pf_addr3.value);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}

drivers/staging/et131x/et1310_mac.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_mac.h -  Defines, structs, enums, prototypes, etc. pertaining to the
+ *                 MAC.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_MAC_H_
+#define _ET1310_MAC_H_
+
+
+#include "et1310_address_map.h"
+
+
+#define COUNTER_WRAP_28_BIT 0x10000000
+#define COUNTER_WRAP_22_BIT 0x400000
+#define COUNTER_WRAP_16_BIT 0x10000
+#define COUNTER_WRAP_12_BIT 0x1000
+
+#define COUNTER_MASK_28_BIT (COUNTER_WRAP_28_BIT - 1)
+#define COUNTER_MASK_22_BIT (COUNTER_WRAP_22_BIT - 1)
+#define COUNTER_MASK_16_BIT (COUNTER_WRAP_16_BIT - 1)
+#define COUNTER_MASK_12_BIT (COUNTER_WRAP_12_BIT - 1)
+
+#define UPDATE_COUNTER(HostCnt,DevCnt) \
+    HostCnt = HostCnt + DevCnt;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void ConfigMACRegs1(struct et131x_adapter *adapter);
+void ConfigMACRegs2(struct et131x_adapter *adapter);
+void ConfigRxMacRegs(struct et131x_adapter *adapter);
+void ConfigTxMacRegs(struct et131x_adapter *adapter);
+void ConfigMacStatRegs(struct et131x_adapter *adapter);
+void ConfigFlowControl(struct et131x_adapter *adapter);
+void UpdateMacStatHostCounters(struct et131x_adapter *adapter);
+void HandleMacStatInterrupt(struct et131x_adapter *adapter);
+void SetupDeviceForMulticast(struct et131x_adapter *adapter);
+void SetupDeviceForUnicast(struct et131x_adapter *adapter);
+
+#endif /* _ET1310_MAC_H_ */

drivers/staging/et131x/et1310_phy.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_phy.c - Routines for configuring and accessing the PHY
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_netdev.h"
+#include "et131x_initpci.h"
+
+#include "et1310_address_map.h"
+#include "et1310_jagcore.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+#include "et1310_mac.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/* Prototypes for functions with local scope */
+static int et131x_xcvr_init(struct et131x_adapter *adapter);
+
+/**
+ * PhyMiRead - Read from the PHY through the MII Interface on the MAC
+ * @adapter: pointer to our private adapter structure
+ * @xcvrAddr: the address of the transciever
+ * @xcvrReg: the register to read
+ * @value: pointer to a 16-bit value in which the value will be stored
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr,
+	      uint8_t xcvrReg, uint16_t *value)
+{
+	struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac;
+	int status = 0;
+	uint32_t delay;
+	MII_MGMT_ADDR_t miiAddr;
+	MII_MGMT_CMD_t miiCmd;
+	MII_MGMT_INDICATOR_t miiIndicator;
+
+	/* Save a local copy of the registers we are dealing with so we can
+	 * set them back
+	 */
+	miiAddr.value = readl(&mac->mii_mgmt_addr.value);
+	miiCmd.value = readl(&mac->mii_mgmt_cmd.value);
+
+	/* Stop the current operation */
+	writel(0, &mac->mii_mgmt_cmd.value);
+
+	/* Set up the register we need to read from on the correct PHY */
+	{
+		MII_MGMT_ADDR_t mii_mgmt_addr = { 0 };
+
+		mii_mgmt_addr.bits.phy_addr = xcvrAddr;
+		mii_mgmt_addr.bits.reg_addr = xcvrReg;
+		writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value);
+	}
+
+	/* Kick the read cycle off */
+	delay = 0;
+
+	writel(0x1, &mac->mii_mgmt_cmd.value);
+
+	do {
+		udelay(50);
+		delay++;
+		miiIndicator.value = readl(&mac->mii_mgmt_indicator.value);
+	} while ((miiIndicator.bits.not_valid || miiIndicator.bits.busy) &&
+		 delay < 50);
+
+	/* If we hit the max delay, we could not read the register */
+	if (delay >= 50) {
+		DBG_WARNING(et131x_dbginfo,
+			    "xcvrReg 0x%08x could not be read\n", xcvrReg);
+		DBG_WARNING(et131x_dbginfo, "status is  0x%08x\n",
+			    miiIndicator.value);
+
+		status = -EIO;
+	}
+
+	/* If we hit here we were able to read the register and we need to
+	 * return the value to the caller
+	 */
+	/* TODO: make this stuff a simple readw()?! */
+	{
+		MII_MGMT_STAT_t mii_mgmt_stat;
+
+		mii_mgmt_stat.value = readl(&mac->mii_mgmt_stat.value);
+		*value = (uint16_t) mii_mgmt_stat.bits.phy_stat;
+	}
+
+	/* Stop the read operation */
+	writel(0, &mac->mii_mgmt_cmd.value);
+
+	DBG_VERBOSE(et131x_dbginfo, "  xcvr_addr = 0x%02x, "
+		    "xcvr_reg  = 0x%02x, "
+		    "value     = 0x%04x.\n", xcvrAddr, xcvrReg, *value);
+
+	/* set the registers we touched back to the state at which we entered
+	 * this function
+	 */
+	writel(miiAddr.value, &mac->mii_mgmt_addr.value);
+	writel(miiCmd.value, &mac->mii_mgmt_cmd.value);
+
+	return status;
+}
+
+/**
+ * MiWrite - Write to a PHY register through the MII interface of the MAC
+ * @adapter: pointer to our private adapter structure
+ * @xcvrReg: the register to read
+ * @value: 16-bit value to write
+ *
+ * Return 0 on success, errno on failure (as defined in errno.h)
+ */
+int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value)
+{
+	struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac;
+	int status = 0;
+	uint8_t xcvrAddr = adapter->Stats.xcvr_addr;
+	uint32_t delay;
+	MII_MGMT_ADDR_t miiAddr;
+	MII_MGMT_CMD_t miiCmd;
+	MII_MGMT_INDICATOR_t miiIndicator;
+
+	/* Save a local copy of the registers we are dealing with so we can
+	 * set them back
+	 */
+	miiAddr.value = readl(&mac->mii_mgmt_addr.value);
+	miiCmd.value = readl(&mac->mii_mgmt_cmd.value);
+
+	/* Stop the current operation */
+	writel(0, &mac->mii_mgmt_cmd.value);
+
+	/* Set up the register we need to write to on the correct PHY */
+	{
+		MII_MGMT_ADDR_t mii_mgmt_addr;
+
+		mii_mgmt_addr.bits.phy_addr = xcvrAddr;
+		mii_mgmt_addr.bits.reg_addr = xcvrReg;
+		writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value);
+	}
+
+	/* Add the value to write to the registers to the mac */
+	writel(value, &mac->mii_mgmt_ctrl.value);
+	delay = 0;
+
+	do {
+		udelay(50);
+		delay++;
+		miiIndicator.value = readl(&mac->mii_mgmt_indicator.value);
+	} while (miiIndicator.bits.busy && delay < 100);
+
+	/* If we hit the max delay, we could not write the register */
+	if (delay == 100) {
+		uint16_t TempValue;
+
+		DBG_WARNING(et131x_dbginfo,
+			    "xcvrReg 0x%08x could not be written", xcvrReg);
+		DBG_WARNING(et131x_dbginfo, "status is  0x%08x\n",
+			    miiIndicator.value);
+		DBG_WARNING(et131x_dbginfo, "command is  0x%08x\n",
+			    readl(&mac->mii_mgmt_cmd.value));
+
+		MiRead(adapter, xcvrReg, &TempValue);
+
+		status = -EIO;
+	}
+
+	/* Stop the write operation */
+	writel(0, &mac->mii_mgmt_cmd.value);
+
+	/* set the registers we touched back to the state at which we entered
+         * this function
+         */
+	writel(miiAddr.value, &mac->mii_mgmt_addr.value);
+	writel(miiCmd.value, &mac->mii_mgmt_cmd.value);
+
+	DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, "
+		    "xcvr_reg  = 0x%02x, "
+		    "value     = 0x%04x.\n", xcvrAddr, xcvrReg, value);
+
+	return status;
+}
+
+/**
+ * et131x_xcvr_find - Find the PHY ID
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_xcvr_find(struct et131x_adapter *adapter)
+{
+	int status = -ENODEV;
+	uint8_t xcvr_addr;
+	MI_IDR1_t idr1;
+	MI_IDR2_t idr2;
+	uint32_t xcvr_id;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* We need to get xcvr id and address we just get the first one */
+	for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) {
+		/* Read the ID from the PHY */
+		PhyMiRead(adapter, xcvr_addr,
+			  (uint8_t) offsetof(MI_REGS_t, idr1),
+			  &idr1.value);
+		PhyMiRead(adapter, xcvr_addr,
+			  (uint8_t) offsetof(MI_REGS_t, idr2),
+			  &idr2.value);
+
+		xcvr_id = (uint32_t) ((idr1.value << 16) | idr2.value);
+
+		if ((idr1.value != 0) && (idr1.value != 0xffff)) {
+			DBG_TRACE(et131x_dbginfo,
+				  "Xcvr addr: 0x%02x\tXcvr_id: 0x%08x\n",
+				  xcvr_addr, xcvr_id);
+
+			adapter->Stats.xcvr_id = xcvr_id;
+			adapter->Stats.xcvr_addr = xcvr_addr;
+
+			status = 0;
+			break;
+		}
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_setphy_normal - Set PHY for normal operation.
+ * @adapter: pointer to our private adapter structure
+ *
+ * Used by Power Management to force the PHY into 10 Base T half-duplex mode,
+ * when going to D3 in WOL mode. Also used during initialization to set the
+ * PHY for normal operation.
+ */
+int et131x_setphy_normal(struct et131x_adapter *adapter)
+{
+	int status;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Make sure the PHY is powered up */
+	ET1310_PhyPowerDown(adapter, 0);
+	status = et131x_xcvr_init(adapter);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_xcvr_init - Init the phy if we are setting it into force mode
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+static int et131x_xcvr_init(struct et131x_adapter *adapter)
+{
+	int status = 0;
+	MI_IMR_t imr;
+	MI_ISR_t isr;
+	MI_LCR2_t lcr2;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Zero out the adapter structure variable representing BMSR */
+	adapter->Bmsr.value = 0;
+
+	MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, isr), &isr.value);
+
+	MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, imr), &imr.value);
+
+	/* Set the link status interrupt only.  Bad behavior when link status
+	 * and auto neg are set, we run into a nested interrupt problem
+	 */
+	imr.bits.int_en = 0x1;
+	imr.bits.link_status = 0x1;
+	imr.bits.autoneg_status = 0x1;
+
+	MiWrite(adapter, (uint8_t) offsetof(MI_REGS_t, imr), imr.value);
+
+	/* Set the LED behavior such that LED 1 indicates speed (off =
+	 * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
+	 * link and activity (on for link, blink off for activity).
+	 *
+	 * NOTE: Some customizations have been added here for specific
+	 * vendors; The LED behavior is now determined by vendor data in the
+	 * EEPROM. However, the above description is the default.
+	 */
+	if ((adapter->eepromData[1] & 0x4) == 0) {
+		MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, lcr2),
+		       &lcr2.value);
+		if ((adapter->eepromData[1] & 0x8) == 0)
+			lcr2.bits.led_tx_rx = 0x3;
+		else
+			lcr2.bits.led_tx_rx = 0x4;
+		lcr2.bits.led_link = 0xa;
+		MiWrite(adapter, (uint8_t) offsetof(MI_REGS_t, lcr2),
+			lcr2.value);
+	}
+
+	/* Determine if we need to go into a force mode and set it */
+	if (adapter->AiForceSpeed == 0 && adapter->AiForceDpx == 0) {
+		if ((adapter->RegistryFlowControl == TxOnly) ||
+		    (adapter->RegistryFlowControl == Both)) {
+			ET1310_PhyAccessMiBit(adapter,
+					      TRUEPHY_BIT_SET, 4, 11, NULL);
+		} else {
+			ET1310_PhyAccessMiBit(adapter,
+					      TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+		}
+
+		if (adapter->RegistryFlowControl == Both) {
+			ET1310_PhyAccessMiBit(adapter,
+					      TRUEPHY_BIT_SET, 4, 10, NULL);
+		} else {
+			ET1310_PhyAccessMiBit(adapter,
+					      TRUEPHY_BIT_CLEAR, 4, 10, NULL);
+		}
+
+		/* Set the phy to autonegotiation */
+		ET1310_PhyAutoNeg(adapter, true);
+
+		/* NOTE - Do we need this? */
+		ET1310_PhyAccessMiBit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL);
+
+		DBG_LEAVE(et131x_dbginfo);
+		return status;
+	} else {
+		ET1310_PhyAutoNeg(adapter, false);
+
+		/* Set to the correct force mode. */
+		if (adapter->AiForceDpx != 1) {
+			if ((adapter->RegistryFlowControl == TxOnly) ||
+			    (adapter->RegistryFlowControl == Both)) {
+				ET1310_PhyAccessMiBit(adapter,
+						      TRUEPHY_BIT_SET, 4, 11,
+						      NULL);
+			} else {
+				ET1310_PhyAccessMiBit(adapter,
+						      TRUEPHY_BIT_CLEAR, 4, 11,
+						      NULL);
+			}
+
+			if (adapter->RegistryFlowControl == Both) {
+				ET1310_PhyAccessMiBit(adapter,
+						      TRUEPHY_BIT_SET, 4, 10,
+						      NULL);
+			} else {
+				ET1310_PhyAccessMiBit(adapter,
+						      TRUEPHY_BIT_CLEAR, 4, 10,
+						      NULL);
+			}
+		} else {
+			ET1310_PhyAccessMiBit(adapter,
+					      TRUEPHY_BIT_CLEAR, 4, 10, NULL);
+			ET1310_PhyAccessMiBit(adapter,
+					      TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+		}
+
+		switch (adapter->AiForceSpeed) {
+		case 10:
+			if (adapter->AiForceDpx == 1) {
+				TPAL_SetPhy10HalfDuplex(adapter);
+			} else if (adapter->AiForceDpx == 2) {
+				TPAL_SetPhy10FullDuplex(adapter);
+			} else {
+				TPAL_SetPhy10Force(adapter);
+			}
+			break;
+		case 100:
+			if (adapter->AiForceDpx == 1) {
+				TPAL_SetPhy100HalfDuplex(adapter);
+			} else if (adapter->AiForceDpx == 2) {
+				TPAL_SetPhy100FullDuplex(adapter);
+			} else {
+				TPAL_SetPhy100Force(adapter);
+			}
+			break;
+		case 1000:
+			TPAL_SetPhy1000FullDuplex(adapter);
+			break;
+		}
+
+		DBG_LEAVE(et131x_dbginfo);
+		return status;
+	}
+}
+
+void et131x_Mii_check(struct et131x_adapter *pAdapter,
+		      MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints)
+{
+	uint8_t ucLinkStatus;
+	uint32_t uiAutoNegStatus;
+	uint32_t uiSpeed;
+	uint32_t uiDuplex;
+	uint32_t uiMdiMdix;
+	uint32_t uiMasterSlave;
+	uint32_t uiPolarity;
+	unsigned long lockflags;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	if (bmsr_ints.bits.link_status) {
+		if (bmsr.bits.link_status) {
+			pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20;
+
+			/* Update our state variables and indicate the
+			 * connected state
+			 */
+			spin_lock_irqsave(&pAdapter->Lock, lockflags);
+
+			pAdapter->MediaState = NETIF_STATUS_MEDIA_CONNECT;
+			MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION);
+
+			spin_unlock_irqrestore(&pAdapter->Lock, lockflags);
+
+			/* Don't indicate state if we're in loopback mode */
+			if (pAdapter->RegistryPhyLoopbk == false) {
+				netif_carrier_on(pAdapter->netdev);
+			}
+		} else {
+			DBG_WARNING(et131x_dbginfo,
+				    "Link down cable problem\n");
+
+			if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) {
+				// NOTE - Is there a way to query this without TruePHY?
+				// && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) {
+				uint16_t Register18;
+
+				MiRead(pAdapter, 0x12, &Register18);
+				MiWrite(pAdapter, 0x12, Register18 | 0x4);
+				MiWrite(pAdapter, 0x10, Register18 | 0x8402);
+				MiWrite(pAdapter, 0x11, Register18 | 511);
+				MiWrite(pAdapter, 0x12, Register18);
+			}
+
+			/* For the first N seconds of life, we are in "link
+			 * detection" When we are in this state, we should
+			 * only report "connected". When the LinkDetection
+			 * Timer expires, we can report disconnected (handled
+			 * in the LinkDetectionDPC).
+			 */
+			if ((MP_IS_FLAG_CLEAR
+			     (pAdapter, fMP_ADAPTER_LINK_DETECTION))
+			    || (pAdapter->MediaState ==
+				NETIF_STATUS_MEDIA_DISCONNECT)) {
+				spin_lock_irqsave(&pAdapter->Lock, lockflags);
+				pAdapter->MediaState =
+				    NETIF_STATUS_MEDIA_DISCONNECT;
+				spin_unlock_irqrestore(&pAdapter->Lock,
+						       lockflags);
+
+				/* Only indicate state if we're in loopback
+				 * mode
+				 */
+				if (pAdapter->RegistryPhyLoopbk == false) {
+					netif_carrier_off(pAdapter->netdev);
+				}
+			}
+
+			pAdapter->uiLinkSpeed = 0;
+			pAdapter->uiDuplexMode = 0;
+
+			/* Free the packets being actively sent & stopped */
+			et131x_free_busy_send_packets(pAdapter);
+
+			/* Re-initialize the send structures */
+			et131x_init_send(pAdapter);
+
+			/* Reset the RFD list and re-start RU */
+			et131x_reset_recv(pAdapter);
+
+			/*
+			 * Bring the device back to the state it was during
+			 * init prior to autonegotiation being complete. This
+			 * way, when we get the auto-neg complete interrupt,
+			 * we can complete init by calling ConfigMacREGS2.
+			 */
+			et131x_soft_reset(pAdapter);
+
+			/* Setup ET1310 as per the documentation */
+			et131x_adapter_setup(pAdapter);
+
+			/* Setup the PHY into coma mode until the cable is
+			 * plugged back in
+			 */
+			if (pAdapter->RegistryPhyComa == 1) {
+				EnablePhyComa(pAdapter);
+			}
+		}
+	}
+
+	if (bmsr_ints.bits.auto_neg_complete ||
+	    ((pAdapter->AiForceDpx == 3) && (bmsr_ints.bits.link_status))) {
+		if (bmsr.bits.auto_neg_complete || (pAdapter->AiForceDpx == 3)) {
+			ET1310_PhyLinkStatus(pAdapter,
+					     &ucLinkStatus, &uiAutoNegStatus,
+					     &uiSpeed, &uiDuplex, &uiMdiMdix,
+					     &uiMasterSlave, &uiPolarity);
+
+			pAdapter->uiLinkSpeed = uiSpeed;
+			pAdapter->uiDuplexMode = uiDuplex;
+
+			DBG_TRACE(et131x_dbginfo,
+				  "pAdapter->uiLinkSpeed 0x%04x, pAdapter->uiDuplex 0x%08x\n",
+				  pAdapter->uiLinkSpeed,
+				  pAdapter->uiDuplexMode);
+
+			pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20;
+
+			if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) {
+				// NOTE - Is there a way to query this without TruePHY?
+				// && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) {
+				uint16_t Register18;
+
+				MiRead(pAdapter, 0x12, &Register18);
+				MiWrite(pAdapter, 0x12, Register18 | 0x4);
+				MiWrite(pAdapter, 0x10, Register18 | 0x8402);
+				MiWrite(pAdapter, 0x11, Register18 | 511);
+				MiWrite(pAdapter, 0x12, Register18);
+			}
+
+			ConfigFlowControl(pAdapter);
+
+			if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) &&
+			    (pAdapter->RegistryJumboPacket > 2048))
+			{
+				ET1310_PhyAndOrReg(pAdapter, 0x16, 0xcfff,
+						   0x2000);
+			}
+
+			SetRxDmaTimer(pAdapter);
+			ConfigMACRegs2(pAdapter);
+		}
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy10HalfDuplex - Force the phy into 10 Base T Half Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly
+ */
+void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* First we need to turn off all other advertisement */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* Set our advertise values accordingly */
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy10FullDuplex - Force the phy into 10 Base T Full Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly
+ */
+void TPAL_SetPhy10FullDuplex(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* First we need to turn off all other advertisement */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* Set our advertise values accordingly */
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy10Force - Force Base-T FD mode WITHOUT using autonegotiation
+ * @pAdapter: pointer to the adapter structure
+ */
+void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* Disable autoneg */
+	ET1310_PhyAutoNeg(pAdapter, false);
+
+	/* Disable all advertisement */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* Force 10 Mbps */
+	ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_10MBPS);
+
+	/* Force Full duplex */
+	ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy100HalfDuplex - Force 100 Base T Half Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly.
+ */
+void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* first we need to turn off all other advertisement */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* Set our advertise values accordingly */
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF);
+
+	/* Set speed */
+	ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy100FullDuplex - Force 100 Base T Full Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly
+ */
+void TPAL_SetPhy100FullDuplex(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* First we need to turn off all other advertisement */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* Set our advertise values accordingly */
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy100Force - Force 100 BaseT FD mode WITHOUT using autonegotiation
+ * @pAdapter: pointer to the adapter structure
+ */
+void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* Disable autoneg */
+	ET1310_PhyAutoNeg(pAdapter, false);
+
+	/* Disable all advertisement */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* Force 100 Mbps */
+	ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS);
+
+	/* Force Full duplex */
+	ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy1000FullDuplex - Force 1000 Base T Full Duplex mode
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly.
+ */
+void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* first we need to turn off all other advertisement */
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+	/* set our advertise values accordingly */
+	ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+
+	/* power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhyAutoNeg - Set phy to autonegotiation mode.
+ * @pAdapter: pointer to the adapter structure
+ */
+void TPAL_SetPhyAutoNeg(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/* Turn on advertisement of all capabilities */
+	ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH);
+
+	ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH);
+
+	if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) {
+		ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+	} else {
+		ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+	}
+
+	/* Make sure auto-neg is ON (it is disabled in FORCE modes) */
+	ET1310_PhyAutoNeg(pAdapter, true);
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+
+/*
+ * The routines which follow provide low-level access to the PHY, and are used
+ * primarily by the routines above (although there are a few places elsewhere
+ * in the driver where this level of access is required).
+ */
+
+static const uint16_t ConfigPhy[25][2] = {
+	/* Reg      Value      Register */
+	/* Addr                         */
+	{0x880B, 0x0926},	/* AfeIfCreg4B1000Msbs */
+	{0x880C, 0x0926},	/* AfeIfCreg4B100Msbs */
+	{0x880D, 0x0926},	/* AfeIfCreg4B10Msbs */
+
+	{0x880E, 0xB4D3},	/* AfeIfCreg4B1000Lsbs */
+	{0x880F, 0xB4D3},	/* AfeIfCreg4B100Lsbs */
+	{0x8810, 0xB4D3},	/* AfeIfCreg4B10Lsbs */
+
+	{0x8805, 0xB03E},	/* AfeIfCreg3B1000Msbs */
+	{0x8806, 0xB03E},	/* AfeIfCreg3B100Msbs */
+	{0x8807, 0xFF00},	/* AfeIfCreg3B10Msbs */
+
+	{0x8808, 0xE090},	/* AfeIfCreg3B1000Lsbs */
+	{0x8809, 0xE110},	/* AfeIfCreg3B100Lsbs */
+	{0x880A, 0x0000},	/* AfeIfCreg3B10Lsbs */
+
+	{0x300D, 1},		/* DisableNorm */
+
+	{0x280C, 0x0180},	/* LinkHoldEnd */
+
+	{0x1C21, 0x0002},	/* AlphaM */
+
+	{0x3821, 6},		/* FfeLkgTx0 */
+	{0x381D, 1},		/* FfeLkg1g4 */
+	{0x381E, 1},		/* FfeLkg1g5 */
+	{0x381F, 1},		/* FfeLkg1g6 */
+	{0x3820, 1},		/* FfeLkg1g7 */
+
+	{0x8402, 0x01F0},	/* Btinact */
+	{0x800E, 20},		/* LftrainTime */
+	{0x800F, 24},		/* DvguardTime */
+	{0x8010, 46},		/* IdlguardTime */
+
+	{0, 0}
+
+};
+
+/* condensed version of the phy initialization routine */
+void ET1310_PhyInit(struct et131x_adapter *pAdapter)
+{
+	uint16_t usData, usIndex;
+
+	if (pAdapter == NULL) {
+		return;
+	}
+
+	// get the identity (again ?)
+	MiRead(pAdapter, PHY_ID_1, &usData);
+	MiRead(pAdapter, PHY_ID_2, &usData);
+
+	// what does this do/achieve ?
+	MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData);	// should read 0002
+	MiWrite(pAdapter, PHY_MPHY_CONTROL_REG,	0x0006);
+
+	// read modem register 0402, should I do something with the return data ?
+	MiWrite(pAdapter, PHY_INDEX_REG, 0x0402);
+	MiRead(pAdapter, PHY_DATA_REG, &usData);
+
+	// what does this do/achieve ?
+	MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002);
+
+	// get the identity (again ?)
+	MiRead(pAdapter, PHY_ID_1, &usData);
+	MiRead(pAdapter, PHY_ID_2, &usData);
+
+	// what does this achieve ?
+	MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData);	// should read 0002
+	MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006);
+
+	// read modem register 0402, should I do something with the return data?
+	MiWrite(pAdapter, PHY_INDEX_REG, 0x0402);
+	MiRead(pAdapter, PHY_DATA_REG, &usData);
+
+	MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002);
+
+	// what does this achieve (should return 0x1040)
+	MiRead(pAdapter, PHY_CONTROL, &usData);
+	MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData);	// should read 0002
+	MiWrite(pAdapter, PHY_CONTROL, 0x1840);
+
+	MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0007);
+
+	// here the writing of the array starts....
+	usIndex = 0;
+	while (ConfigPhy[usIndex][0] != 0x0000) {
+		// write value
+		MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]);
+		MiWrite(pAdapter, PHY_DATA_REG, ConfigPhy[usIndex][1]);
+
+		// read it back
+		MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]);
+		MiRead(pAdapter, PHY_DATA_REG, &usData);
+
+		// do a check on the value read back ?
+		usIndex++;
+	}
+	// here the writing of the array ends...
+
+	MiRead(pAdapter, PHY_CONTROL, &usData);	// 0x1840
+	MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData);	// should read 0007
+	MiWrite(pAdapter, PHY_CONTROL, 0x1040);
+	MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002);
+}
+
+void ET1310_PhyReset(struct et131x_adapter *pAdapter)
+{
+	MiWrite(pAdapter, PHY_CONTROL, 0x8000);
+}
+
+void ET1310_PhyPowerDown(struct et131x_adapter *pAdapter, bool down)
+{
+	uint16_t usData;
+
+	MiRead(pAdapter, PHY_CONTROL, &usData);
+
+	if (down == false) {
+		// Power UP
+		usData &= ~0x0800;
+		MiWrite(pAdapter, PHY_CONTROL, usData);
+	} else {
+		// Power DOWN
+		usData |= 0x0800;
+		MiWrite(pAdapter, PHY_CONTROL, usData);
+	}
+}
+
+void ET1310_PhyAutoNeg(struct et131x_adapter *pAdapter, bool enable)
+{
+	uint16_t usData;
+
+	MiRead(pAdapter, PHY_CONTROL, &usData);
+
+	if (enable == true) {
+		// Autonegotiation ON
+		usData |= 0x1000;
+		MiWrite(pAdapter, PHY_CONTROL, usData);
+	} else {
+		// Autonegotiation OFF
+		usData &= ~0x1000;
+		MiWrite(pAdapter, PHY_CONTROL, usData);
+	}
+}
+
+void ET1310_PhyDuplexMode(struct et131x_adapter *pAdapter, uint16_t duplex)
+{
+	uint16_t usData;
+
+	MiRead(pAdapter, PHY_CONTROL, &usData);
+
+	if (duplex == TRUEPHY_DUPLEX_FULL) {
+		// Set Full Duplex
+		usData |= 0x100;
+		MiWrite(pAdapter, PHY_CONTROL, usData);
+	} else {
+		// Set Half Duplex
+		usData &= ~0x100;
+		MiWrite(pAdapter, PHY_CONTROL, usData);
+	}
+}
+
+void ET1310_PhySpeedSelect(struct et131x_adapter *pAdapter, uint16_t speed)
+{
+	uint16_t usData;
+
+	// Read the PHY control register
+	MiRead(pAdapter, PHY_CONTROL, &usData);
+
+	// Clear all Speed settings (Bits 6, 13)
+	usData &= ~0x2040;
+
+	// Reset the speed bits based on user selection
+	switch (speed) {
+	case TRUEPHY_SPEED_10MBPS:
+		// Bits already cleared above, do nothing
+		break;
+
+	case TRUEPHY_SPEED_100MBPS:
+		// 100M == Set bit 13
+		usData |= 0x2000;
+		break;
+
+	case TRUEPHY_SPEED_1000MBPS:
+	default:
+		usData |= 0x0040;
+		break;
+	}
+
+	// Write back the new speed
+	MiWrite(pAdapter, PHY_CONTROL, usData);
+}
+
+void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *pAdapter,
+				  uint16_t duplex)
+{
+	uint16_t usData;
+
+	// Read the PHY 1000 Base-T Control Register
+	MiRead(pAdapter, PHY_1000_CONTROL, &usData);
+
+	// Clear Bits 8,9
+	usData &= ~0x0300;
+
+	switch (duplex) {
+	case TRUEPHY_ADV_DUPLEX_NONE:
+		// Duplex already cleared, do nothing
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_FULL:
+		// Set Bit 9
+		usData |= 0x0200;
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_HALF:
+		// Set Bit 8
+		usData |= 0x0100;
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_BOTH:
+	default:
+		usData |= 0x0300;
+		break;
+	}
+
+	// Write back advertisement
+	MiWrite(pAdapter, PHY_1000_CONTROL, usData);
+}
+
+void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *pAdapter,
+				 uint16_t duplex)
+{
+	uint16_t usData;
+
+	// Read the Autonegotiation Register (10/100)
+	MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData);
+
+	// Clear bits 7,8
+	usData &= ~0x0180;
+
+	switch (duplex) {
+	case TRUEPHY_ADV_DUPLEX_NONE:
+		// Duplex already cleared, do nothing
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_FULL:
+		// Set Bit 8
+		usData |= 0x0100;
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_HALF:
+		// Set Bit 7
+		usData |= 0x0080;
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_BOTH:
+	default:
+		// Set Bits 7,8
+		usData |= 0x0180;
+		break;
+	}
+
+	// Write back advertisement
+	MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData);
+}
+
+void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *pAdapter,
+				uint16_t duplex)
+{
+	uint16_t usData;
+
+	// Read the Autonegotiation Register (10/100)
+	MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData);
+
+	// Clear bits 5,6
+	usData &= ~0x0060;
+
+	switch (duplex) {
+	case TRUEPHY_ADV_DUPLEX_NONE:
+		// Duplex already cleared, do nothing
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_FULL:
+		// Set Bit 6
+		usData |= 0x0040;
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_HALF:
+		// Set Bit 5
+		usData |= 0x0020;
+		break;
+
+	case TRUEPHY_ADV_DUPLEX_BOTH:
+	default:
+		// Set Bits 5,6
+		usData |= 0x0060;
+		break;
+	}
+
+	// Write back advertisement
+	MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData);
+}
+
+void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter,
+			  uint8_t *ucLinkStatus,
+			  uint32_t *uiAutoNeg,
+			  uint32_t *uiLinkSpeed,
+			  uint32_t *uiDuplexMode,
+			  uint32_t *uiMdiMdix,
+			  uint32_t *uiMasterSlave, uint32_t *uiPolarity)
+{
+	uint16_t usMiStatus = 0;
+	uint16_t us1000BaseT = 0;
+	uint16_t usVmiPhyStatus = 0;
+	uint16_t usControl = 0;
+
+	MiRead(pAdapter, PHY_STATUS, &usMiStatus);
+	MiRead(pAdapter, PHY_1000_STATUS, &us1000BaseT);
+	MiRead(pAdapter, PHY_PHY_STATUS, &usVmiPhyStatus);
+	MiRead(pAdapter, PHY_CONTROL, &usControl);
+
+	if (ucLinkStatus) {
+		*ucLinkStatus =
+		    (unsigned char)((usVmiPhyStatus & 0x0040) ? 1 : 0);
+	}
+
+	if (uiAutoNeg) {
+		*uiAutoNeg =
+		    (usControl & 0x1000) ? ((usVmiPhyStatus & 0x0020) ?
+					    TRUEPHY_ANEG_COMPLETE :
+					    TRUEPHY_ANEG_NOT_COMPLETE) :
+		    TRUEPHY_ANEG_DISABLED;
+	}
+
+	if (uiLinkSpeed) {
+		*uiLinkSpeed = (usVmiPhyStatus & 0x0300) >> 8;
+	}
+
+	if (uiDuplexMode) {
+		*uiDuplexMode = (usVmiPhyStatus & 0x0080) >> 7;
+	}
+
+	if (uiMdiMdix) {
+		/* NOTE: Need to complete this */
+		*uiMdiMdix = 0;
+	}
+
+	if (uiMasterSlave) {
+		*uiMasterSlave =
+		    (us1000BaseT & 0x4000) ? TRUEPHY_CFG_MASTER :
+		    TRUEPHY_CFG_SLAVE;
+	}
+
+	if (uiPolarity) {
+		*uiPolarity =
+		    (usVmiPhyStatus & 0x0400) ? TRUEPHY_POLARITY_INVERTED :
+		    TRUEPHY_POLARITY_NORMAL;
+	}
+}
+
+void ET1310_PhyAndOrReg(struct et131x_adapter *pAdapter,
+			uint16_t regnum, uint16_t andMask, uint16_t orMask)
+{
+	uint16_t reg;
+
+	// Read the requested register
+	MiRead(pAdapter, regnum, &reg);
+
+	// Apply the AND mask
+	reg &= andMask;
+
+	// Apply the OR mask
+	reg |= orMask;
+
+	// Write the value back to the register
+	MiWrite(pAdapter, regnum, reg);
+}
+
+void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action,
+			   uint16_t regnum, uint16_t bitnum, uint8_t *value)
+{
+	uint16_t reg;
+	uint16_t mask = 0;
+
+	// Create a mask to isolate the requested bit
+	mask = 0x0001 << bitnum;
+
+	// Read the requested register
+	MiRead(pAdapter, regnum, &reg);
+
+	switch (action) {
+	case TRUEPHY_BIT_READ:
+		if (value != NULL) {
+			*value = (reg & mask) >> bitnum;
+		}
+		break;
+
+	case TRUEPHY_BIT_SET:
+		reg |= mask;
+		MiWrite(pAdapter, regnum, reg);
+		break;
+
+	case TRUEPHY_BIT_CLEAR:
+		reg &= ~mask;
+		MiWrite(pAdapter, regnum, reg);
+		break;
+
+	default:
+		break;
+	}
+}

drivers/staging/et131x/et1310_phy.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_phy.h - Defines, structs, enums, prototypes, etc. pertaining to the
+ *                PHY.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_PHY_H_
+#define _ET1310_PHY_H_
+
+#include "et1310_address_map.h"
+
+#define TRUEPHY_SUCCESS 0
+#define TRUEPHY_FAILURE 1
+typedef void *TRUEPHY_HANDLE;
+typedef void *TRUEPHY_PLATFORM_HANDLE;
+typedef void *TRUEPHY_OSAL_HANDLE;
+
+/* MI Register Addresses */
+#define MI_CONTROL_REG                      0
+#define MI_STATUS_REG                       1
+#define MI_PHY_IDENTIFIER_1_REG             2
+#define MI_PHY_IDENTIFIER_2_REG             3
+#define MI_AUTONEG_ADVERTISEMENT_REG        4
+#define MI_AUTONEG_LINK_PARTNER_ABILITY_REG 5
+#define MI_AUTONEG_EXPANSION_REG            6
+#define MI_AUTONEG_NEXT_PAGE_TRANSMIT_REG   7
+#define MI_LINK_PARTNER_NEXT_PAGE_REG       8
+#define MI_1000BASET_CONTROL_REG            9
+#define MI_1000BASET_STATUS_REG             10
+#define MI_RESERVED11_REG                   11
+#define MI_RESERVED12_REG                   12
+#define MI_RESERVED13_REG                   13
+#define MI_RESERVED14_REG                   14
+#define MI_EXTENDED_STATUS_REG              15
+
+/* VMI Register Addresses */
+#define VMI_RESERVED16_REG                  16
+#define VMI_RESERVED17_REG                  17
+#define VMI_RESERVED18_REG                  18
+#define VMI_LOOPBACK_CONTROL_REG            19
+#define VMI_RESERVED20_REG                  20
+#define VMI_MI_CONTROL_REG                  21
+#define VMI_PHY_CONFIGURATION_REG           22
+#define VMI_PHY_CONTROL_REG                 23
+#define VMI_INTERRUPT_MASK_REG              24
+#define VMI_INTERRUPT_STATUS_REG            25
+#define VMI_PHY_STATUS_REG                  26
+#define VMI_LED_CONTROL_1_REG               27
+#define VMI_LED_CONTROL_2_REG               28
+#define VMI_RESERVED29_REG                  29
+#define VMI_RESERVED30_REG                  30
+#define VMI_RESERVED31_REG                  31
+
+/* PHY Register Mapping(MI) Management Interface Regs */
+typedef struct _MI_REGS_t {
+	u8 bmcr;		// Basic mode control reg(Reg 0x00)
+	u8 bmsr;		// Basic mode status reg(Reg 0x01)
+	u8 idr1;		// Phy identifier reg 1(Reg 0x02)
+	u8 idr2;		// Phy identifier reg 2(Reg 0x03)
+	u8 anar;		// Auto-Negotiation advertisement(Reg 0x04)
+	u8 anlpar;		// Auto-Negotiation link Partner Ability(Reg 0x05)
+	u8 aner;		// Auto-Negotiation expansion reg(Reg 0x06)
+	u8 annptr;		// Auto-Negotiation next page transmit reg(Reg 0x07)
+	u8 lpnpr;		// link partner next page reg(Reg 0x08)
+	u8 gcr;		// Gigabit basic mode control reg(Reg 0x09)
+	u8 gsr;		// Gigabit basic mode status reg(Reg 0x0A)
+	u8 mi_res1[4];	// Future use by MI working group(Reg 0x0B - 0x0E)
+	u8 esr;		// Extended status reg(Reg 0x0F)
+	u8 mi_res2[3];	// Future use by MI working group(Reg 0x10 - 0x12)
+	u8 loop_ctl;	// Loopback Control Reg(Reg 0x13)
+	u8 mi_res3;	// Future use by MI working group(Reg 0x14)
+	u8 mcr;		// MI Control Reg(Reg 0x15)
+	u8 pcr;		// Configuration Reg(Reg 0x16)
+	u8 phy_ctl;	// PHY Control Reg(Reg 0x17)
+	u8 imr;		// Interrupt Mask Reg(Reg 0x18)
+	u8 isr;		// Interrupt Status Reg(Reg 0x19)
+	u8 psr;		// PHY Status Reg(Reg 0x1A)
+	u8 lcr1;		// LED Control 1 Reg(Reg 0x1B)
+	u8 lcr2;		// LED Control 2 Reg(Reg 0x1C)
+	u8 mi_res4[3];	// Future use by MI working group(Reg 0x1D - 0x1F)
+} MI_REGS_t, *PMI_REGS_t;
+
+/* MI Register 0: Basic mode control register */
+typedef union _MI_BMCR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 reset:1;		// bit 15
+		u16 loopback:1;		// bit 14
+		u16 speed_sel:1;		// bit 13
+		u16 enable_autoneg:1;	// bit 12
+		u16 power_down:1;		// bit 11
+		u16 isolate:1;		// bit 10
+		u16 restart_autoneg:1;	// bit 9
+		u16 duplex_mode:1;		// bit 8
+		u16 col_test:1;		// bit 7
+		u16 speed_1000_sel:1;	// bit 6
+		u16 res1:6;		// bits 0-5
+#else
+		u16 res1:6;		// bits 0-5
+		u16 speed_1000_sel:1;	// bit 6
+		u16 col_test:1;		// bit 7
+		u16 duplex_mode:1;		// bit 8
+		u16 restart_autoneg:1;	// bit 9
+		u16 isolate:1;		// bit 10
+		u16 power_down:1;		// bit 11
+		u16 enable_autoneg:1;	// bit 12
+		u16 speed_sel:1;		// bit 13
+		u16 loopback:1;		// bit 14
+		u16 reset:1;		// bit 15
+#endif
+	} bits;
+} MI_BMCR_t, *PMI_BMCR_t;
+
+/* MI Register 1:  Basic mode status register */
+typedef union _MI_BMSR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 link_100T4:1;		// bit 15
+		u16 link_100fdx:1;		// bit 14
+		u16 link_100hdx:1;		// bit 13
+		u16 link_10fdx:1;		// bit 12
+		u16 link_10hdx:1;		// bit 11
+		u16 link_100T2fdx:1;	// bit 10
+		u16 link_100T2hdx:1;	// bit 9
+		u16 extend_status:1;	// bit 8
+		u16 res1:1;		// bit 7
+		u16 preamble_supress:1;	// bit 6
+		u16 auto_neg_complete:1;	// bit 5
+		u16 remote_fault:1;	// bit 4
+		u16 auto_neg_able:1;	// bit 3
+		u16 link_status:1;		// bit 2
+		u16 jabber_detect:1;	// bit 1
+		u16 ext_cap:1;		// bit 0
+#else
+		u16 ext_cap:1;		// bit 0
+		u16 jabber_detect:1;	// bit 1
+		u16 link_status:1;		// bit 2
+		u16 auto_neg_able:1;	// bit 3
+		u16 remote_fault:1;	// bit 4
+		u16 auto_neg_complete:1;	// bit 5
+		u16 preamble_supress:1;	// bit 6
+		u16 res1:1;		// bit 7
+		u16 extend_status:1;	// bit 8
+		u16 link_100T2hdx:1;	// bit 9
+		u16 link_100T2fdx:1;	// bit 10
+		u16 link_10hdx:1;		// bit 11
+		u16 link_10fdx:1;		// bit 12
+		u16 link_100hdx:1;		// bit 13
+		u16 link_100fdx:1;		// bit 14
+		u16 link_100T4:1;		// bit 15
+#endif
+	} bits;
+} MI_BMSR_t, *PMI_BMSR_t;
+
+/* MI Register 2: Physical Identifier 1 */
+typedef union _MI_IDR1_t {
+	u16 value;
+	struct {
+		u16 ieee_address:16;	// 0x0282 default(bits 0-15)
+	} bits;
+} MI_IDR1_t, *PMI_IDR1_t;
+
+/* MI Register 3: Physical Identifier 2 */
+typedef union _MI_IDR2_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 ieee_address:6;	// 111100 default(bits 10-15)
+		u16 model_no:6;		// 000001 default(bits 4-9)
+		u16 rev_no:4;		// 0010   default(bits 0-3)
+#else
+		u16 rev_no:4;		// 0010   default(bits 0-3)
+		u16 model_no:6;		// 000001 default(bits 4-9)
+		u16 ieee_address:6;	// 111100 default(bits 10-15)
+#endif
+	} bits;
+} MI_IDR2_t, *PMI_IDR2_t;
+
+/* MI Register 4: Auto-negotiation advertisement register */
+typedef union _MI_ANAR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 np_indication:1;	// bit 15
+		u16 res2:1;		// bit 14
+		u16 remote_fault:1;	// bit 13
+		u16 res1:1;		// bit 12
+		u16 cap_asmpause:1;	// bit 11
+		u16 cap_pause:1;		// bit 10
+		u16 cap_100T4:1;		// bit 9
+		u16 cap_100fdx:1;		// bit 8
+		u16 cap_100hdx:1;		// bit 7
+		u16 cap_10fdx:1;		// bit 6
+		u16 cap_10hdx:1;		// bit 5
+		u16 selector:5;		// bits 0-4
+#else
+		u16 selector:5;		// bits 0-4
+		u16 cap_10hdx:1;		// bit 5
+		u16 cap_10fdx:1;		// bit 6
+		u16 cap_100hdx:1;		// bit 7
+		u16 cap_100fdx:1;		// bit 8
+		u16 cap_100T4:1;		// bit 9
+		u16 cap_pause:1;		// bit 10
+		u16 cap_asmpause:1;	// bit 11
+		u16 res1:1;		// bit 12
+		u16 remote_fault:1;	// bit 13
+		u16 res2:1;		// bit 14
+		u16 np_indication:1;	// bit 15
+#endif
+	} bits;
+} MI_ANAR_t, *PMI_ANAR_t;
+
+/* MI Register 5: Auto-negotiation link partner advertisement register */
+typedef struct _MI_ANLPAR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 np_indication:1;	// bit 15
+		u16 acknowledge:1;		// bit 14
+		u16 remote_fault:1;	// bit 13
+		u16 res1:1;		// bit 12
+		u16 cap_asmpause:1;	// bit 11
+		u16 cap_pause:1;		// bit 10
+		u16 cap_100T4:1;		// bit 9
+		u16 cap_100fdx:1;		// bit 8
+		u16 cap_100hdx:1;		// bit 7
+		u16 cap_10fdx:1;		// bit 6
+		u16 cap_10hdx:1;		// bit 5
+		u16 selector:5;		// bits 0-4
+#else
+		u16 selector:5;		// bits 0-4
+		u16 cap_10hdx:1;		// bit 5
+		u16 cap_10fdx:1;		// bit 6
+		u16 cap_100hdx:1;		// bit 7
+		u16 cap_100fdx:1;		// bit 8
+		u16 cap_100T4:1;		// bit 9
+		u16 cap_pause:1;		// bit 10
+		u16 cap_asmpause:1;	// bit 11
+		u16 res1:1;		// bit 12
+		u16 remote_fault:1;	// bit 13
+		u16 acknowledge:1;		// bit 14
+		u16 np_indication:1;	// bit 15
+#endif
+	} bits;
+} MI_ANLPAR_t, *PMI_ANLPAR_t;
+
+/* MI Register 6: Auto-negotiation expansion register */
+typedef union _MI_ANER_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res:11;	// bits 5-15
+		u16 pdf:1;		// bit 4
+		u16 lp_np_able:1;	// bit 3
+		u16 np_able:1;	// bit 2
+		u16 page_rx:1;	// bit 1
+		u16 lp_an_able:1;	// bit 0
+#else
+		u16 lp_an_able:1;	// bit 0
+		u16 page_rx:1;	// bit 1
+		u16 np_able:1;	// bit 2
+		u16 lp_np_able:1;	// bit 3
+		u16 pdf:1;		// bit 4
+		u16 res:11;	// bits 5-15
+#endif
+	} bits;
+} MI_ANER_t, *PMI_ANER_t;
+
+/* MI Register 7: Auto-negotiation next page transmit reg(0x07) */
+typedef union _MI_ANNPTR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 np:1;		// bit 15
+		u16 res1:1;	// bit 14
+		u16 msg_page:1;	// bit 13
+		u16 ack2:1;	// bit 12
+		u16 toggle:1;	// bit 11
+		u16 msg:11;	// bits 0-10
+#else
+		u16 msg:11;	// bits 0-10
+		u16 toggle:1;	// bit 11
+		u16 ack2:1;	// bit 12
+		u16 msg_page:1;	// bit 13
+		u16 res1:1;	// bit 14
+		u16 np:1;		// bit 15
+#endif
+	} bits;
+} MI_ANNPTR_t, *PMI_ANNPTR_t;
+
+/* MI Register 8: Link Partner Next Page Reg(0x08) */
+typedef union _MI_LPNPR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 np:1;		// bit 15
+		u16 ack:1;		// bit 14
+		u16 msg_page:1;	// bit 13
+		u16 ack2:1;	// bit 12
+		u16 toggle:1;	// bit 11
+		u16 msg:11;	// bits 0-10
+#else
+		u16 msg:11;	// bits 0-10
+		u16 toggle:1;	// bit 11
+		u16 ack2:1;	// bit 12
+		u16 msg_page:1;	// bit 13
+		u16 ack:1;		// bit 14
+		u16 np:1;		// bit 15
+#endif
+	} bits;
+} MI_LPNPR_t, *PMI_LPNPR_t;
+
+/* MI Register 9: 1000BaseT Control Reg(0x09) */
+typedef union _MI_GCR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 test_mode:3;		// bits 13-15
+		u16 ms_config_en:1;	// bit 12
+		u16 ms_value:1;		// bit 11
+		u16 port_type:1;		// bit 10
+		u16 link_1000fdx:1;	// bit 9
+		u16 link_1000hdx:1;	// bit 8
+		u16 res:8;			// bit 0-7
+#else
+		u16 res:8;			// bit 0-7
+		u16 link_1000hdx:1;	// bit 8
+		u16 link_1000fdx:1;	// bit 9
+		u16 port_type:1;		// bit 10
+		u16 ms_value:1;		// bit 11
+		u16 ms_config_en:1;	// bit 12
+		u16 test_mode:3;		// bits 13-15
+#endif
+	} bits;
+} MI_GCR_t, *PMI_GCR_t;
+
+/* MI Register 10: 1000BaseT Status Reg(0x0A) */
+typedef union _MI_GSR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 ms_config_fault:1;	// bit 15
+		u16 ms_resolve:1;		// bit 14
+		u16 local_rx_status:1;	// bit 13
+		u16 remote_rx_status:1;	// bit 12
+		u16 link_1000fdx:1;	// bit 11
+		u16 link_1000hdx:1;	// bit 10
+		u16 res:2;			// bits 8-9
+		u16 idle_err_cnt:8;	// bits 0-7
+#else
+		u16 idle_err_cnt:8;	// bits 0-7
+		u16 res:2;			// bits 8-9
+		u16 link_1000hdx:1;	// bit 10
+		u16 link_1000fdx:1;	// bit 11
+		u16 remote_rx_status:1;	// bit 12
+		u16 local_rx_status:1;	// bit 13
+		u16 ms_resolve:1;		// bit 14
+		u16 ms_config_fault:1;	// bit 15
+#endif
+	} bits;
+} MI_GSR_t, *PMI_GSR_t;
+
+/* MI Register 11 - 14: Reserved Regs(0x0B - 0x0E) */
+typedef union _MI_RES_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res15:1;	// bit 15
+		u16 res14:1;	// bit 14
+		u16 res13:1;	// bit 13
+		u16 res12:1;	// bit 12
+		u16 res11:1;	// bit 11
+		u16 res10:1;	// bit 10
+		u16 res9:1;	// bit 9
+		u16 res8:1;	// bit 8
+		u16 res7:1;	// bit 7
+		u16 res6:1;	// bit 6
+		u16 res5:1;	// bit 5
+		u16 res4:1;	// bit 4
+		u16 res3:1;	// bit 3
+		u16 res2:1;	// bit 2
+		u16 res1:1;	// bit 1
+		u16 res0:1;	// bit 0
+#else
+		u16 res0:1;	// bit 0
+		u16 res1:1;	// bit 1
+		u16 res2:1;	// bit 2
+		u16 res3:1;	// bit 3
+		u16 res4:1;	// bit 4
+		u16 res5:1;	// bit 5
+		u16 res6:1;	// bit 6
+		u16 res7:1;	// bit 7
+		u16 res8:1;	// bit 8
+		u16 res9:1;	// bit 9
+		u16 res10:1;	// bit 10
+		u16 res11:1;	// bit 11
+		u16 res12:1;	// bit 12
+		u16 res13:1;	// bit 13
+		u16 res14:1;	// bit 14
+		u16 res15:1;	// bit 15
+#endif
+	} bits;
+} MI_RES_t, *PMI_RES_t;
+
+/* MI Register 15: Extended status Reg(0x0F) */
+typedef union _MI_ESR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 link_1000Xfdx:1;	// bit 15
+		u16 link_1000Xhdx:1;	// bit 14
+		u16 link_1000fdx:1;	// bit 13
+		u16 link_1000hdx:1;	// bit 12
+		u16 res:12;		// bit 0-11
+#else
+		u16 res:12;		// bit 0-11
+		u16 link_1000hdx:1;	// bit 12
+		u16 link_1000fdx:1;	// bit 13
+		u16 link_1000Xhdx:1;	// bit 14
+		u16 link_1000Xfdx:1;	// bit 15
+#endif
+	} bits;
+} MI_ESR_t, *PMI_ESR_t;
+
+/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
+
+/* MI Register 19: Loopback Control Reg(0x13) */
+typedef union _MI_LCR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 mii_en:1;		// bit 15
+		u16 pcs_en:1;		// bit 14
+		u16 pmd_en:1;		// bit 13
+		u16 all_digital_en:1;	// bit 12
+		u16 replica_en:1;		// bit 11
+		u16 line_driver_en:1;	// bit 10
+		u16 res:10;		// bit 0-9
+#else
+		u16 res:10;		// bit 0-9
+		u16 line_driver_en:1;	// bit 10
+		u16 replica_en:1;		// bit 11
+		u16 all_digital_en:1;	// bit 12
+		u16 pmd_en:1;		// bit 13
+		u16 pcs_en:1;		// bit 14
+		u16 mii_en:1;		// bit 15
+#endif
+	} bits;
+} MI_LCR_t, *PMI_LCR_t;
+
+/* MI Register 20: Reserved Reg(0x14) */
+
+/* MI Register 21: Management Interface Control Reg(0x15) */
+typedef union _MI_MICR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res1:5;		// bits 11-15
+		u16 mi_error_count:7;	// bits 4-10
+		u16 res2:1;		// bit 3
+		u16 ignore_10g_fr:1;	// bit 2
+		u16 res3:1;		// bit 1
+		u16 preamble_supress_en:1;	// bit 0
+#else
+		u16 preamble_supress_en:1;	// bit 0
+		u16 res3:1;		// bit 1
+		u16 ignore_10g_fr:1;	// bit 2
+		u16 res2:1;		// bit 3
+		u16 mi_error_count:7;	// bits 4-10
+		u16 res1:5;		// bits 11-15
+#endif
+	} bits;
+} MI_MICR_t, *PMI_MICR_t;
+
+/* MI Register 22: PHY Configuration Reg(0x16) */
+typedef union _MI_PHY_CONFIG_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 crs_tx_en:1;		// bit 15
+		u16 res1:1;		// bit 14
+		u16 tx_fifo_depth:2;	// bits 12-13
+		u16 speed_downshift:2;	// bits 10-11
+		u16 pbi_detect:1;		// bit 9
+		u16 tbi_rate:1;		// bit 8
+		u16 alternate_np:1;	// bit 7
+		u16 group_mdio_en:1;	// bit 6
+		u16 tx_clock_en:1;		// bit 5
+		u16 sys_clock_en:1;	// bit 4
+		u16 res2:1;		// bit 3
+		u16 mac_if_mode:3;		// bits 0-2
+#else
+		u16 mac_if_mode:3;		// bits 0-2
+		u16 res2:1;		// bit 3
+		u16 sys_clock_en:1;	// bit 4
+		u16 tx_clock_en:1;		// bit 5
+		u16 group_mdio_en:1;	// bit 6
+		u16 alternate_np:1;	// bit 7
+		u16 tbi_rate:1;		// bit 8
+		u16 pbi_detect:1;		// bit 9
+		u16 speed_downshift:2;	// bits 10-11
+		u16 tx_fifo_depth:2;	// bits 12-13
+		u16 res1:1;		// bit 14
+		u16 crs_tx_en:1;		// bit 15
+#endif
+	} bits;
+} MI_PHY_CONFIG_t, *PMI_PHY_CONFIG_t;
+
+/* MI Register 23: PHY CONTROL Reg(0x17) */
+typedef union _MI_PHY_CONTROL_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res1:1;		// bit 15
+		u16 tdr_en:1;		// bit 14
+		u16 res2:1;		// bit 13
+		u16 downshift_attempts:2;	// bits 11-12
+		u16 res3:5;		// bit 6-10
+		u16 jabber_10baseT:1;	// bit 5
+		u16 sqe_10baseT:1;		// bit 4
+		u16 tp_loopback_10baseT:1;	// bit 3
+		u16 preamble_gen_en:1;	// bit 2
+		u16 res4:1;		// bit 1
+		u16 force_int:1;		// bit 0
+#else
+		u16 force_int:1;		// bit 0
+		u16 res4:1;		// bit 1
+		u16 preamble_gen_en:1;	// bit 2
+		u16 tp_loopback_10baseT:1;	// bit 3
+		u16 sqe_10baseT:1;		// bit 4
+		u16 jabber_10baseT:1;	// bit 5
+		u16 res3:5;		// bit 6-10
+		u16 downshift_attempts:2;	// bits 11-12
+		u16 res2:1;		// bit 13
+		u16 tdr_en:1;		// bit 14
+		u16 res1:1;		// bit 15
+#endif
+	} bits;
+} MI_PHY_CONTROL_t, *PMI_PHY_CONTROL_t;
+
+/* MI Register 24: Interrupt Mask Reg(0x18) */
+typedef union _MI_IMR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res1:6;		// bits 10-15
+		u16 mdio_sync_lost:1;	// bit 9
+		u16 autoneg_status:1;	// bit 8
+		u16 hi_bit_err:1;		// bit 7
+		u16 np_rx:1;		// bit 6
+		u16 err_counter_full:1;	// bit 5
+		u16 fifo_over_underflow:1;	// bit 4
+		u16 rx_status:1;		// bit 3
+		u16 link_status:1;		// bit 2
+		u16 automatic_speed:1;	// bit 1
+		u16 int_en:1;		// bit 0
+#else
+		u16 int_en:1;		// bit 0
+		u16 automatic_speed:1;	// bit 1
+		u16 link_status:1;		// bit 2
+		u16 rx_status:1;		// bit 3
+		u16 fifo_over_underflow:1;	// bit 4
+		u16 err_counter_full:1;	// bit 5
+		u16 np_rx:1;		// bit 6
+		u16 hi_bit_err:1;		// bit 7
+		u16 autoneg_status:1;	// bit 8
+		u16 mdio_sync_lost:1;	// bit 9
+		u16 res1:6;		// bits 10-15
+#endif
+	} bits;
+} MI_IMR_t, *PMI_IMR_t;
+
+/* MI Register 25: Interrupt Status Reg(0x19) */
+typedef union _MI_ISR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res1:6;		// bits 10-15
+		u16 mdio_sync_lost:1;	// bit 9
+		u16 autoneg_status:1;	// bit 8
+		u16 hi_bit_err:1;		// bit 7
+		u16 np_rx:1;		// bit 6
+		u16 err_counter_full:1;	// bit 5
+		u16 fifo_over_underflow:1;	// bit 4
+		u16 rx_status:1;		// bit 3
+		u16 link_status:1;		// bit 2
+		u16 automatic_speed:1;	// bit 1
+		u16 int_en:1;		// bit 0
+#else
+		u16 int_en:1;		// bit 0
+		u16 automatic_speed:1;	// bit 1
+		u16 link_status:1;		// bit 2
+		u16 rx_status:1;		// bit 3
+		u16 fifo_over_underflow:1;	// bit 4
+		u16 err_counter_full:1;	// bit 5
+		u16 np_rx:1;		// bit 6
+		u16 hi_bit_err:1;		// bit 7
+		u16 autoneg_status:1;	// bit 8
+		u16 mdio_sync_lost:1;	// bit 9
+		u16 res1:6;		// bits 10-15
+#endif
+	} bits;
+} MI_ISR_t, *PMI_ISR_t;
+
+/* MI Register 26: PHY Status Reg(0x1A) */
+typedef union _MI_PSR_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res1:1;		// bit 15
+		u16 autoneg_fault:2;	// bit 13-14
+		u16 autoneg_status:1;	// bit 12
+		u16 mdi_x_status:1;	// bit 11
+		u16 polarity_status:1;	// bit 10
+		u16 speed_status:2;	// bits 8-9
+		u16 duplex_status:1;	// bit 7
+		u16 link_status:1;		// bit 6
+		u16 tx_status:1;		// bit 5
+		u16 rx_status:1;		// bit 4
+		u16 collision_status:1;	// bit 3
+		u16 autoneg_en:1;		// bit 2
+		u16 pause_en:1;		// bit 1
+		u16 asymmetric_dir:1;	// bit 0
+#else
+		u16 asymmetric_dir:1;	// bit 0
+		u16 pause_en:1;		// bit 1
+		u16 autoneg_en:1;		// bit 2
+		u16 collision_status:1;	// bit 3
+		u16 rx_status:1;		// bit 4
+		u16 tx_status:1;		// bit 5
+		u16 link_status:1;		// bit 6
+		u16 duplex_status:1;	// bit 7
+		u16 speed_status:2;	// bits 8-9
+		u16 polarity_status:1;	// bit 10
+		u16 mdi_x_status:1;	// bit 11
+		u16 autoneg_status:1;	// bit 12
+		u16 autoneg_fault:2;	// bit 13-14
+		u16 res1:1;		// bit 15
+#endif
+	} bits;
+} MI_PSR_t, *PMI_PSR_t;
+
+/* MI Register 27: LED Control Reg 1(0x1B) */
+typedef union _MI_LCR1_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 res1:2;		// bits 14-15
+		u16 led_dup_indicate:2;	// bits 12-13
+		u16 led_10baseT:2;		// bits 10-11
+		u16 led_collision:2;	// bits 8-9
+		u16 res2:2;		// bits 6-7
+		u16 res3:2;		// bits 4-5
+		u16 pulse_dur:2;		// bits 2-3
+		u16 pulse_stretch1:1;	// bit 1
+		u16 pulse_stretch0:1;	// bit 0
+#else
+		u16 pulse_stretch0:1;	// bit 0
+		u16 pulse_stretch1:1;	// bit 1
+		u16 pulse_dur:2;		// bits 2-3
+		u16 res3:2;		// bits 4-5
+		u16 res2:2;		// bits 6-7
+		u16 led_collision:2;	// bits 8-9
+		u16 led_10baseT:2;		// bits 10-11
+		u16 led_dup_indicate:2;	// bits 12-13
+		u16 res1:2;		// bits 14-15
+#endif
+	} bits;
+} MI_LCR1_t, *PMI_LCR1_t;
+
+/* MI Register 28: LED Control Reg 2(0x1C) */
+typedef union _MI_LCR2_t {
+	u16 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u16 led_link:4;		// bits 12-15
+		u16 led_tx_rx:4;		// bits 8-11
+		u16 led_100BaseTX:4;	// bits 4-7
+		u16 led_1000BaseT:4;	// bits 0-3
+#else
+		u16 led_1000BaseT:4;	// bits 0-3
+		u16 led_100BaseTX:4;	// bits 4-7
+		u16 led_tx_rx:4;		// bits 8-11
+		u16 led_link:4;		// bits 12-15
+#endif
+	} bits;
+} MI_LCR2_t, *PMI_LCR2_t;
+
+/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */
+
+/* TruePHY headers */
+typedef struct _TRUEPHY_ACCESS_MI_REGS_ {
+	TRUEPHY_HANDLE hTruePhy;
+	int32_t nPhyId;
+	u8 bReadWrite;
+	u8 *pbyRegs;
+	u8 *pwData;
+	int32_t nRegCount;
+} TRUEPHY_ACCESS_MI_REGS, *PTRUEPHY_ACCESS_MI_REGS;
+
+/* TruePHY headers */
+typedef struct _TAG_TPAL_ACCESS_MI_REGS_ {
+	u32 nPhyId;
+	u8 bReadWrite;
+	u32 nRegCount;
+	u16 Data[4096];
+	u8 Regs[4096];
+} TPAL_ACCESS_MI_REGS, *PTPAL_ACCESS_MI_REGS;
+
+
+typedef TRUEPHY_HANDLE TPAL_HANDLE;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+/* OS Specific Functions*/
+void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy10FullDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter);
+void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy100FullDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter);
+void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhyAutoNeg(struct et131x_adapter *adapter);
+
+/* Prototypes for ET1310_phy.c */
+int et131x_xcvr_find(struct et131x_adapter *adapter);
+int et131x_setphy_normal(struct et131x_adapter *adapter);
+int32_t PhyMiRead(struct et131x_adapter *adapter,
+	       u8 xcvrAddr, u8 xcvrReg, u16 *value);
+
+/* static inline function does not work because et131x_adapter is not always
+ * defined
+ */
+#define MiRead(adapter, xcvrReg, value) \
+	PhyMiRead((adapter), (adapter)->Stats.xcvr_addr, (xcvrReg), (value))
+
+int32_t MiWrite(struct et131x_adapter *adapter,
+		u8 xcvReg, u16 value);
+void et131x_Mii_check(struct et131x_adapter *pAdapter,
+		      MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints);
+
+/* This last is not strictly required (the driver could call the TPAL
+ * version instead), but this sets the adapter up correctly, and calls the
+ * access routine indirectly.  This protects the driver from changes in TPAL.
+ */
+void SetPhy_10BaseTHalfDuplex(struct et131x_adapter *adapter);
+
+/* Defines for PHY access routines */
+
+// Define bit operation flags
+#define TRUEPHY_BIT_CLEAR               0
+#define TRUEPHY_BIT_SET                 1
+#define TRUEPHY_BIT_READ                2
+
+// Define read/write operation flags
+#ifndef TRUEPHY_READ
+#define TRUEPHY_READ                    0
+#define TRUEPHY_WRITE                   1
+#define TRUEPHY_MASK                    2
+#endif
+
+// Define speeds
+#define TRUEPHY_SPEED_10MBPS            0
+#define TRUEPHY_SPEED_100MBPS           1
+#define TRUEPHY_SPEED_1000MBPS          2
+
+// Define duplex modes
+#define TRUEPHY_DUPLEX_HALF             0
+#define TRUEPHY_DUPLEX_FULL             1
+
+// Define master/slave configuration values
+#define TRUEPHY_CFG_SLAVE               0
+#define TRUEPHY_CFG_MASTER              1
+
+// Define MDI/MDI-X settings
+#define TRUEPHY_MDI                     0
+#define TRUEPHY_MDIX                    1
+#define TRUEPHY_AUTO_MDI_MDIX           2
+
+// Define 10Base-T link polarities
+#define TRUEPHY_POLARITY_NORMAL         0
+#define TRUEPHY_POLARITY_INVERTED       1
+
+// Define auto-negotiation results
+#define TRUEPHY_ANEG_NOT_COMPLETE       0
+#define TRUEPHY_ANEG_COMPLETE           1
+#define TRUEPHY_ANEG_DISABLED           2
+
+/* Define duplex advertisment flags */
+#define TRUEPHY_ADV_DUPLEX_NONE         0x00
+#define TRUEPHY_ADV_DUPLEX_FULL         0x01
+#define TRUEPHY_ADV_DUPLEX_HALF         0x02
+#define TRUEPHY_ADV_DUPLEX_BOTH     \
+    (TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)
+
+#define PHY_CONTROL                0x00	//#define TRU_MI_CONTROL_REGISTER                 0
+#define PHY_STATUS                 0x01	//#define TRU_MI_STATUS_REGISTER                  1
+#define PHY_ID_1                   0x02	//#define TRU_MI_PHY_IDENTIFIER_1_REGISTER        2
+#define PHY_ID_2                   0x03	//#define TRU_MI_PHY_IDENTIFIER_2_REGISTER        3
+#define PHY_AUTO_ADVERTISEMENT     0x04	//#define TRU_MI_ADVERTISEMENT_REGISTER           4
+#define PHY_AUTO_LINK_PARTNER      0x05	//#define TRU_MI_LINK_PARTNER_ABILITY_REGISTER    5
+#define PHY_AUTO_EXPANSION         0x06	//#define TRU_MI_EXPANSION_REGISTER               6
+#define PHY_AUTO_NEXT_PAGE_TX      0x07	//#define TRU_MI_NEXT_PAGE_TRANSMIT_REGISTER      7
+#define PHY_LINK_PARTNER_NEXT_PAGE 0x08	//#define TRU_MI_LINK_PARTNER_NEXT_PAGE_REGISTER  8
+#define PHY_1000_CONTROL           0x09	//#define TRU_MI_1000BASET_CONTROL_REGISTER       9
+#define PHY_1000_STATUS            0x0A	//#define TRU_MI_1000BASET_STATUS_REGISTER        10
+
+#define PHY_EXTENDED_STATUS        0x0F	//#define TRU_MI_EXTENDED_STATUS_REGISTER         15
+
+// some defines for modem registers that seem to be 'reserved'
+#define PHY_INDEX_REG              0x10
+#define PHY_DATA_REG               0x11
+
+#define PHY_MPHY_CONTROL_REG       0x12	//#define TRU_VMI_MPHY_CONTROL_REGISTER           18
+
+#define PHY_LOOPBACK_CONTROL       0x13	//#define TRU_VMI_LOOPBACK_CONTROL_1_REGISTER     19
+					//#define TRU_VMI_LOOPBACK_CONTROL_2_REGISTER     20
+#define PHY_REGISTER_MGMT_CONTROL  0x15	//#define TRU_VMI_MI_SEQ_CONTROL_REGISTER         21
+#define PHY_CONFIG                 0x16	//#define TRU_VMI_CONFIGURATION_REGISTER          22
+#define PHY_PHY_CONTROL            0x17	//#define TRU_VMI_PHY_CONTROL_REGISTER            23
+#define PHY_INTERRUPT_MASK         0x18	//#define TRU_VMI_INTERRUPT_MASK_REGISTER         24
+#define PHY_INTERRUPT_STATUS       0x19	//#define TRU_VMI_INTERRUPT_STATUS_REGISTER       25
+#define PHY_PHY_STATUS             0x1A	//#define TRU_VMI_PHY_STATUS_REGISTER             26
+#define PHY_LED_1                  0x1B	//#define TRU_VMI_LED_CONTROL_1_REGISTER          27
+#define PHY_LED_2                  0x1C	//#define TRU_VMI_LED_CONTROL_2_REGISTER          28
+					//#define TRU_VMI_LINK_CONTROL_REGISTER           29
+					//#define TRU_VMI_TIMING_CONTROL_REGISTER
+
+/* Prototypes for PHY access routines */
+void ET1310_PhyInit(struct et131x_adapter *adapter);
+void ET1310_PhyReset(struct et131x_adapter *adapter);
+void ET1310_PhyPowerDown(struct et131x_adapter *adapter, bool down);
+void ET1310_PhyAutoNeg(struct et131x_adapter *adapter, bool enable);
+void ET1310_PhyDuplexMode(struct et131x_adapter *adapter, u16 duplex);
+void ET1310_PhySpeedSelect(struct et131x_adapter *adapter, u16 speed);
+void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *adapter,
+				  u16 duplex);
+void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *adapter,
+				 u16 duplex);
+void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *adapter,
+				u16 duplex);
+void ET1310_PhyLinkStatus(struct et131x_adapter *adapter,
+			  u8 *ucLinkStatus,
+			  u32 *uiAutoNeg,
+			  u32 *uiLinkSpeed,
+			  u32 *uiDuplexMode,
+			  u32 *uiMdiMdix,
+			  u32 *uiMasterSlave, u32 *uiPolarity);
+void ET1310_PhyAndOrReg(struct et131x_adapter *adapter,
+			u16 regnum, u16 andMask, u16 orMask);
+void ET1310_PhyAccessMiBit(struct et131x_adapter *adapter,
+			   u16 action,
+			   u16 regnum, u16 bitnum, u8 *value);
+
+#endif /* _ET1310_PHY_H_ */

drivers/staging/et131x/et1310_pm.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_pm.c - All power management related code (not completely implemented)
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+#include "et1310_rx.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * EnablePhyComa - called when network cable is unplugged
+ * @pAdapter: pointer to our adapter structure
+ *
+ * driver receive an phy status change interrupt while in D0 and check that
+ * phy_status is down.
+ *
+ *          -- gate off JAGCore;
+ *          -- set gigE PHY in Coma mode
+ *          -- wake on phy_interrupt; Perform software reset JAGCore,
+ *             re-initialize jagcore and gigE PHY
+ *
+ *      Add D0-ASPM-PhyLinkDown Support:
+ *          -- while in D0, when there is a phy_interrupt indicating phy link
+ *             down status, call the MPSetPhyComa routine to enter this active
+ *             state power saving mode
+ *          -- while in D0-ASPM-PhyLinkDown mode, when there is a phy_interrupt
+ *       indicating linkup status, call the MPDisablePhyComa routine to
+ *             restore JAGCore and gigE PHY
+ */
+void EnablePhyComa(struct et131x_adapter *pAdapter)
+{
+	unsigned long lockflags;
+	PM_CSR_t GlobalPmCSR;
+	int32_t LoopCounter = 10;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+
+	/* Save the GbE PHY speed and duplex modes. Need to restore this
+	 * when cable is plugged back in
+	 */
+	pAdapter->PoMgmt.PowerDownSpeed = pAdapter->AiForceSpeed;
+	pAdapter->PoMgmt.PowerDownDuplex = pAdapter->AiForceDpx;
+
+	/* Stop sending packets. */
+	spin_lock_irqsave(&pAdapter->SendHWLock, lockflags);
+	MP_SET_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER);
+	spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags);
+
+	/* Wait for outstanding Receive packets */
+	while ((MP_GET_RCV_REF(pAdapter) != 0) && (LoopCounter-- > 0)) {
+		mdelay(2);
+	}
+
+	/* Gate off JAGCore 3 clock domains */
+	GlobalPmCSR.bits.pm_sysclk_gate = 0;
+	GlobalPmCSR.bits.pm_txclk_gate = 0;
+	GlobalPmCSR.bits.pm_rxclk_gate = 0;
+	writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value);
+
+	/* Program gigE PHY in to Coma mode */
+	GlobalPmCSR.bits.pm_phy_sw_coma = 1;
+	writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * DisablePhyComa - Disable the Phy Coma Mode
+ * @pAdapter: pointer to our adapter structure
+ */
+void DisablePhyComa(struct et131x_adapter *pAdapter)
+{
+	PM_CSR_t GlobalPmCSR;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+
+	/* Disable phy_sw_coma register and re-enable JAGCore clocks */
+	GlobalPmCSR.bits.pm_sysclk_gate = 1;
+	GlobalPmCSR.bits.pm_txclk_gate = 1;
+	GlobalPmCSR.bits.pm_rxclk_gate = 1;
+	GlobalPmCSR.bits.pm_phy_sw_coma = 0;
+	writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value);
+
+	/* Restore the GbE PHY speed and duplex modes;
+	 * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY
+	 */
+	pAdapter->AiForceSpeed = pAdapter->PoMgmt.PowerDownSpeed;
+	pAdapter->AiForceDpx = pAdapter->PoMgmt.PowerDownDuplex;
+
+	/* Re-initialize the send structures */
+	et131x_init_send(pAdapter);
+
+	/* Reset the RFD list and re-start RU  */
+	et131x_reset_recv(pAdapter);
+
+	/* Bring the device back to the state it was during init prior to
+         * autonegotiation being complete.  This way, when we get the auto-neg
+         * complete interrupt, we can complete init by calling ConfigMacREGS2.
+         */
+	et131x_soft_reset(pAdapter);
+
+	/* setup et1310 as per the documentation ?? */
+	et131x_adapter_setup(pAdapter);
+
+	/* Allow Tx to restart */
+	MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER);
+
+	/* Need to re-enable Rx. */
+	et131x_rx_dma_enable(pAdapter);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+

drivers/staging/et131x/et1310_pm.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_pm.h - Defines, structs, enums, prototypes, etc. pertaining to power
+ *               management.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_PM_H_
+#define _ET1310_PM_H_
+
+#include "et1310_address_map.h"
+
+#define MAX_WOL_PACKET_SIZE    0x80
+#define MAX_WOL_MASK_SIZE      ( MAX_WOL_PACKET_SIZE / 8 )
+#define NUM_WOL_PATTERNS       0x5
+#define CRC16_POLY             0x1021
+
+/* Definition of NDIS_DEVICE_POWER_STATE */
+typedef enum {
+	NdisDeviceStateUnspecified = 0,
+	NdisDeviceStateD0,
+	NdisDeviceStateD1,
+	NdisDeviceStateD2,
+	NdisDeviceStateD3
+} NDIS_DEVICE_POWER_STATE;
+
+typedef struct _MP_POWER_MGMT {
+	/* variable putting the phy into coma mode when boot up with no cable
+	 * plugged in after 5 seconds
+	 */
+	u8 TransPhyComaModeOnBoot;
+
+	/* Array holding the five CRC values that the device is currently
+	 * using for WOL.  This will be queried when a pattern is to be
+	 * removed.
+	 */
+	u32 localWolAndCrc0;
+	u16 WOLPatternList[NUM_WOL_PATTERNS];
+	u8 WOLMaskList[NUM_WOL_PATTERNS][MAX_WOL_MASK_SIZE];
+	u32 WOLMaskSize[NUM_WOL_PATTERNS];
+
+	/* IP address */
+	union {
+		u32 u32;
+		u8 u8[4];
+	} IPAddress;
+
+	/* Current Power state of the adapter. */
+	NDIS_DEVICE_POWER_STATE PowerState;
+	bool WOLState;
+	bool WOLEnabled;
+	bool Failed10Half;
+	bool bFailedStateTransition;
+
+	/* Next two used to save power information at power down. This
+	 * information will be used during power up to set up parts of Power
+	 * Management in JAGCore
+	 */
+	u32 tx_en;
+	u32 rx_en;
+	u16 PowerDownSpeed;
+	u8 PowerDownDuplex;
+} MP_POWER_MGMT, *PMP_POWER_MGMT;
+
+/* Forward declaration of the private adapter structure
+ * ( IS THERE A WAY TO DO THIS WITH A TYPEDEF??? )
+ */
+struct et131x_adapter;
+
+u16 CalculateCCITCRC16(u8 *Pattern, u8 *Mask, u32 MaskSize);
+void EnablePhyComa(struct et131x_adapter *adapter);
+void DisablePhyComa(struct et131x_adapter *adapter);
+
+#endif /* _ET1310_PM_H_ */

drivers/staging/et131x/et1310_rx.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_rx.c - Routines used to perform data reception
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+#include "et1310_rx.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+
+void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd);
+
+/**
+ * et131x_rx_dma_memory_alloc
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h)
+ *
+ * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required,
+ * and the Packet Status Ring.
+ */
+int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
+{
+	uint32_t OuterLoop, InnerLoop;
+	uint32_t bufsize;
+	uint32_t pktStatRingSize, FBRChunkSize;
+	RX_RING_t *rx_ring;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Setup some convenience pointers */
+	rx_ring = (RX_RING_t *) & adapter->RxRing;
+
+	/* Alloc memory for the lookup table */
+#ifdef USE_FBR0
+	rx_ring->Fbr[0] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL);
+#endif
+
+	rx_ring->Fbr[1] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL);
+
+	/* The first thing we will do is configure the sizes of the buffer
+	 * rings. These will change based on jumbo packet support.  Larger
+	 * jumbo packets increases the size of each entry in FBR0, and the
+	 * number of entries in FBR0, while at the same time decreasing the
+	 * number of entries in FBR1.
+	 *
+	 * FBR1 holds "large" frames, FBR0 holds "small" frames.  If FBR1
+	 * entries are huge in order to accomodate a "jumbo" frame, then it
+	 * will have less entries.  Conversely, FBR1 will now be relied upon
+	 * to carry more "normal" frames, thus it's entry size also increases
+	 * and the number of entries goes up too (since it now carries
+	 * "small" + "regular" packets.
+	 *
+	 * In this scheme, we try to maintain 512 entries between the two
+	 * rings. Also, FBR1 remains a constant size - when it's size doubles
+	 * the number of entries halves.  FBR0 increases in size, however.
+	 */
+
+	if (adapter->RegistryJumboPacket < 2048) {
+#ifdef USE_FBR0
+		rx_ring->Fbr0BufferSize = 256;
+		rx_ring->Fbr0NumEntries = 512;
+#endif
+		rx_ring->Fbr1BufferSize = 2048;
+		rx_ring->Fbr1NumEntries = 512;
+	} else if (adapter->RegistryJumboPacket < 4096) {
+#ifdef USE_FBR0
+		rx_ring->Fbr0BufferSize = 512;
+		rx_ring->Fbr0NumEntries = 1024;
+#endif
+		rx_ring->Fbr1BufferSize = 4096;
+		rx_ring->Fbr1NumEntries = 512;
+	} else {
+#ifdef USE_FBR0
+		rx_ring->Fbr0BufferSize = 1024;
+		rx_ring->Fbr0NumEntries = 768;
+#endif
+		rx_ring->Fbr1BufferSize = 16384;
+		rx_ring->Fbr1NumEntries = 128;
+	}
+
+#ifdef USE_FBR0
+	adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr0NumEntries +
+	    adapter->RxRing.Fbr1NumEntries;
+#else
+	adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr1NumEntries;
+#endif
+
+	/* Allocate an area of memory for Free Buffer Ring 1 */
+	bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff;
+	rx_ring->pFbr1RingVa = pci_alloc_consistent(adapter->pdev,
+						    bufsize,
+						    &rx_ring->pFbr1RingPa);
+	if (!rx_ring->pFbr1RingVa) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot alloc memory for Free Buffer Ring 1\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Save physical address
+	 *
+	 * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+	 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+	 * are ever returned, make sure the high part is retrieved here
+	 * before storing the adjusted address.
+	 */
+	rx_ring->Fbr1Realpa = rx_ring->pFbr1RingPa;
+
+	/* Align Free Buffer Ring 1 on a 4K boundary */
+	et131x_align_allocated_memory(adapter,
+				      &rx_ring->Fbr1Realpa,
+				      &rx_ring->Fbr1offset, 0x0FFF);
+
+	rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa +
+					rx_ring->Fbr1offset);
+
+#ifdef USE_FBR0
+	/* Allocate an area of memory for Free Buffer Ring 0 */
+	bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff;
+	rx_ring->pFbr0RingVa = pci_alloc_consistent(adapter->pdev,
+						    bufsize,
+						    &rx_ring->pFbr0RingPa);
+	if (!rx_ring->pFbr0RingVa) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot alloc memory for Free Buffer Ring 0\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Save physical address
+	 *
+	 * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+	 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+	 * are ever returned, make sure the high part is retrieved here before
+	 * storing the adjusted address.
+	 */
+	rx_ring->Fbr0Realpa = rx_ring->pFbr0RingPa;
+
+	/* Align Free Buffer Ring 0 on a 4K boundary */
+	et131x_align_allocated_memory(adapter,
+				      &rx_ring->Fbr0Realpa,
+				      &rx_ring->Fbr0offset, 0x0FFF);
+
+	rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa +
+					rx_ring->Fbr0offset);
+#endif
+
+	for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr1NumEntries / FBR_CHUNKS);
+	     OuterLoop++) {
+		uint64_t Fbr1Offset;
+		uint64_t Fbr1TempPa;
+		uint32_t Fbr1Align;
+
+		/* This code allocates an area of memory big enough for N
+		 * free buffers + (buffer_size - 1) so that the buffers can
+		 * be aligned on 4k boundaries.  If each buffer were aligned
+		 * to a buffer_size boundary, the effect would be to double
+		 * the size of FBR0.  By allocating N buffers at once, we
+		 * reduce this overhead.
+		 */
+		if (rx_ring->Fbr1BufferSize > 4096) {
+			Fbr1Align = 4096;
+		} else {
+			Fbr1Align = rx_ring->Fbr1BufferSize;
+		}
+
+		FBRChunkSize =
+		    (FBR_CHUNKS * rx_ring->Fbr1BufferSize) + Fbr1Align - 1;
+		rx_ring->Fbr1MemVa[OuterLoop] =
+		    pci_alloc_consistent(adapter->pdev, FBRChunkSize,
+					 &rx_ring->Fbr1MemPa[OuterLoop]);
+
+		if (!rx_ring->Fbr1MemVa[OuterLoop]) {
+			DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n");
+			DBG_LEAVE(et131x_dbginfo);
+			return -ENOMEM;
+		}
+
+		/* See NOTE in "Save Physical Address" comment above */
+		Fbr1TempPa = rx_ring->Fbr1MemPa[OuterLoop];
+
+		et131x_align_allocated_memory(adapter,
+					      &Fbr1TempPa,
+					      &Fbr1Offset, (Fbr1Align - 1));
+
+		for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
+			uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
+
+			/* Save the Virtual address of this index for quick
+			 * access later
+			 */
+			rx_ring->Fbr[1]->Va[index] =
+			    (uint8_t *) rx_ring->Fbr1MemVa[OuterLoop] +
+			    (InnerLoop * rx_ring->Fbr1BufferSize) + Fbr1Offset;
+
+			/* now store the physical address in the descriptor
+			 * so the device can access it
+			 */
+			rx_ring->Fbr[1]->PAHigh[index] =
+			    (uint32_t) (Fbr1TempPa >> 32);
+			rx_ring->Fbr[1]->PALow[index] = (uint32_t) Fbr1TempPa;
+
+			Fbr1TempPa += rx_ring->Fbr1BufferSize;
+
+			rx_ring->Fbr[1]->Buffer1[index] =
+			    rx_ring->Fbr[1]->Va[index];
+			rx_ring->Fbr[1]->Buffer2[index] =
+			    rx_ring->Fbr[1]->Va[index] - 4;
+		}
+	}
+
+#ifdef USE_FBR0
+	/* Same for FBR0 (if in use) */
+	for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr0NumEntries / FBR_CHUNKS);
+	     OuterLoop++) {
+		uint64_t Fbr0Offset;
+		uint64_t Fbr0TempPa;
+
+		FBRChunkSize = ((FBR_CHUNKS + 1) * rx_ring->Fbr0BufferSize) - 1;
+		rx_ring->Fbr0MemVa[OuterLoop] =
+		    pci_alloc_consistent(adapter->pdev, FBRChunkSize,
+					 &rx_ring->Fbr0MemPa[OuterLoop]);
+
+		if (!rx_ring->Fbr0MemVa[OuterLoop]) {
+			DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n");
+			DBG_LEAVE(et131x_dbginfo);
+			return -ENOMEM;
+		}
+
+		/* See NOTE in "Save Physical Address" comment above */
+		Fbr0TempPa = rx_ring->Fbr0MemPa[OuterLoop];
+
+		et131x_align_allocated_memory(adapter,
+					      &Fbr0TempPa,
+					      &Fbr0Offset,
+					      rx_ring->Fbr0BufferSize - 1);
+
+		for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
+			uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
+
+			rx_ring->Fbr[0]->Va[index] =
+			    (uint8_t *) rx_ring->Fbr0MemVa[OuterLoop] +
+			    (InnerLoop * rx_ring->Fbr0BufferSize) + Fbr0Offset;
+
+			rx_ring->Fbr[0]->PAHigh[index] =
+			    (uint32_t) (Fbr0TempPa >> 32);
+			rx_ring->Fbr[0]->PALow[index] = (uint32_t) Fbr0TempPa;
+
+			Fbr0TempPa += rx_ring->Fbr0BufferSize;
+
+			rx_ring->Fbr[0]->Buffer1[index] =
+			    rx_ring->Fbr[0]->Va[index];
+			rx_ring->Fbr[0]->Buffer2[index] =
+			    rx_ring->Fbr[0]->Va[index] - 4;
+		}
+	}
+#endif
+
+	/* Allocate an area of memory for FIFO of Packet Status ring entries */
+	pktStatRingSize =
+	    sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
+
+	rx_ring->pPSRingVa = pci_alloc_consistent(adapter->pdev,
+						  pktStatRingSize + 0x0fff,
+						  &rx_ring->pPSRingPa);
+
+	if (!rx_ring->pPSRingVa) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot alloc memory for Packet Status Ring\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Save physical address
+	 *
+	 * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
+	 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+	 * are ever returned, make sure the high part is retrieved here before
+	 * storing the adjusted address.
+	 */
+	rx_ring->pPSRingRealPa = rx_ring->pPSRingPa;
+
+	/* Align Packet Status Ring on a 4K boundary */
+	et131x_align_allocated_memory(adapter,
+				      &rx_ring->pPSRingRealPa,
+				      &rx_ring->pPSRingOffset, 0x0FFF);
+
+	rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa +
+				      rx_ring->pPSRingOffset);
+
+	/* Allocate an area of memory for writeback of status information */
+	rx_ring->pRxStatusVa = pci_alloc_consistent(adapter->pdev,
+						    sizeof(RX_STATUS_BLOCK_t) +
+						    0x7, &rx_ring->pRxStatusPa);
+	if (!rx_ring->pRxStatusVa) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot alloc memory for Status Block\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Save physical address */
+	rx_ring->RxStatusRealPA = rx_ring->pRxStatusPa;
+
+	/* Align write back on an 8 byte boundary */
+	et131x_align_allocated_memory(adapter,
+				      &rx_ring->RxStatusRealPA,
+				      &rx_ring->RxStatusOffset, 0x07);
+
+	rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa +
+					rx_ring->RxStatusOffset);
+	rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD;
+
+	/* Recv
+	 * pci_pool_create initializes a lookaside list. After successful
+	 * creation, nonpaged fixed-size blocks can be allocated from and
+	 * freed to the lookaside list.
+	 * RFDs will be allocated from this pool.
+	 */
+	rx_ring->RecvLookaside = kmem_cache_create(adapter->netdev->name,
+						   sizeof(MP_RFD),
+						   0,
+						   SLAB_CACHE_DMA |
+						   SLAB_HWCACHE_ALIGN,
+						   NULL);
+
+	MP_SET_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE);
+
+	/* The RFDs are going to be put on lists later on, so initialize the
+	 * lists now.
+	 */
+	INIT_LIST_HEAD(&rx_ring->RecvList);
+	INIT_LIST_HEAD(&rx_ring->RecvPendingList);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+/**
+ * et131x_rx_dma_memory_free - Free all memory allocated within this module.
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
+{
+	uint32_t index;
+	uint32_t bufsize;
+	uint32_t pktStatRingSize;
+	PMP_RFD pMpRfd;
+	RX_RING_t *rx_ring;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Setup some convenience pointers */
+	rx_ring = (RX_RING_t *) & adapter->RxRing;
+
+	/* Free RFDs and associated packet descriptors */
+	DBG_ASSERT(rx_ring->nReadyRecv == rx_ring->NumRfd);
+
+	while (!list_empty(&rx_ring->RecvList)) {
+		pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvList.next,
+					       MP_RFD, list_node);
+
+		list_del(&pMpRfd->list_node);
+		et131x_rfd_resources_free(adapter, pMpRfd);
+	}
+
+	while (!list_empty(&rx_ring->RecvPendingList)) {
+		pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvPendingList.next,
+					       MP_RFD, list_node);
+		list_del(&pMpRfd->list_node);
+		et131x_rfd_resources_free(adapter, pMpRfd);
+	}
+
+	/* Free Free Buffer Ring 1 */
+	if (rx_ring->pFbr1RingVa) {
+		/* First the packet memory */
+		for (index = 0; index <
+		     (rx_ring->Fbr1NumEntries / FBR_CHUNKS); index++) {
+			if (rx_ring->Fbr1MemVa[index]) {
+				uint32_t Fbr1Align;
+
+				if (rx_ring->Fbr1BufferSize > 4096) {
+					Fbr1Align = 4096;
+				} else {
+					Fbr1Align = rx_ring->Fbr1BufferSize;
+				}
+
+				bufsize =
+				    (rx_ring->Fbr1BufferSize * FBR_CHUNKS) +
+				    Fbr1Align - 1;
+
+				pci_free_consistent(adapter->pdev,
+						    bufsize,
+						    rx_ring->Fbr1MemVa[index],
+						    rx_ring->Fbr1MemPa[index]);
+
+				rx_ring->Fbr1MemVa[index] = NULL;
+			}
+		}
+
+		/* Now the FIFO itself */
+		rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa -
+						rx_ring->Fbr1offset);
+
+		bufsize =
+		    (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff;
+
+		pci_free_consistent(adapter->pdev,
+				    bufsize,
+				    rx_ring->pFbr1RingVa, rx_ring->pFbr1RingPa);
+
+		rx_ring->pFbr1RingVa = NULL;
+	}
+
+#ifdef USE_FBR0
+	/* Now the same for Free Buffer Ring 0 */
+	if (rx_ring->pFbr0RingVa) {
+		/* First the packet memory */
+		for (index = 0; index <
+		     (rx_ring->Fbr0NumEntries / FBR_CHUNKS); index++) {
+			if (rx_ring->Fbr0MemVa[index]) {
+				bufsize =
+				    (rx_ring->Fbr0BufferSize *
+				     (FBR_CHUNKS + 1)) - 1;
+
+				pci_free_consistent(adapter->pdev,
+						    bufsize,
+						    rx_ring->Fbr0MemVa[index],
+						    rx_ring->Fbr0MemPa[index]);
+
+				rx_ring->Fbr0MemVa[index] = NULL;
+			}
+		}
+
+		/* Now the FIFO itself */
+		rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa -
+						rx_ring->Fbr0offset);
+
+		bufsize =
+		    (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff;
+
+		pci_free_consistent(adapter->pdev,
+				    bufsize,
+				    rx_ring->pFbr0RingVa, rx_ring->pFbr0RingPa);
+
+		rx_ring->pFbr0RingVa = NULL;
+	}
+#endif
+
+	/* Free Packet Status Ring */
+	if (rx_ring->pPSRingVa) {
+		rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa -
+					      rx_ring->pPSRingOffset);
+
+		pktStatRingSize =
+		    sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
+
+		pci_free_consistent(adapter->pdev,
+				    pktStatRingSize + 0x0fff,
+				    rx_ring->pPSRingVa, rx_ring->pPSRingPa);
+
+		rx_ring->pPSRingVa = NULL;
+	}
+
+	/* Free area of memory for the writeback of status information */
+	if (rx_ring->pRxStatusVa) {
+		rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa -
+						rx_ring->RxStatusOffset);
+
+		pci_free_consistent(adapter->pdev,
+				    sizeof(RX_STATUS_BLOCK_t) + 0x7,
+				    rx_ring->pRxStatusVa, rx_ring->pRxStatusPa);
+
+		rx_ring->pRxStatusVa = NULL;
+	}
+
+	/* Free receive buffer pool */
+
+	/* Free receive packet pool */
+
+	/* Destroy the lookaside (RFD) pool */
+	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE)) {
+		kmem_cache_destroy(rx_ring->RecvLookaside);
+		MP_CLEAR_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE);
+	}
+
+	/* Free the FBR Lookup Table */
+#ifdef USE_FBR0
+	kfree(rx_ring->Fbr[0]);
+#endif
+
+	kfree(rx_ring->Fbr[1]);
+
+	/* Reset Counters */
+	rx_ring->nReadyRecv = 0;
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_init_recv - Initialize receive data structures.
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h)
+ */
+int et131x_init_recv(struct et131x_adapter *adapter)
+{
+	int status = -ENOMEM;
+	PMP_RFD pMpRfd = NULL;
+	uint32_t RfdCount;
+	uint32_t TotalNumRfd = 0;
+	RX_RING_t *rx_ring = NULL;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Setup some convenience pointers */
+	rx_ring = (RX_RING_t *) & adapter->RxRing;
+
+	/* Setup each RFD */
+	for (RfdCount = 0; RfdCount < rx_ring->NumRfd; RfdCount++) {
+		pMpRfd = (MP_RFD *) kmem_cache_alloc(rx_ring->RecvLookaside,
+						     GFP_ATOMIC | GFP_DMA);
+
+		if (!pMpRfd) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Couldn't alloc RFD out of kmem_cache\n");
+			status = -ENOMEM;
+			continue;
+		}
+
+		status = et131x_rfd_resources_alloc(adapter, pMpRfd);
+		if (status != 0) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Couldn't alloc packet for RFD\n");
+			kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
+			continue;
+		}
+
+		/* Add this RFD to the RecvList */
+		list_add_tail(&pMpRfd->list_node, &rx_ring->RecvList);
+
+		/* Increment both the available RFD's, and the total RFD's. */
+		rx_ring->nReadyRecv++;
+		TotalNumRfd++;
+	}
+
+	if (TotalNumRfd > NIC_MIN_NUM_RFD) {
+		status = 0;
+	}
+
+	rx_ring->NumRfd = TotalNumRfd;
+
+	if (status != 0) {
+		kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
+		DBG_ERROR(et131x_dbginfo,
+			  "Allocation problems in et131x_init_recv\n");
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_rfd_resources_alloc
+ * @adapter: pointer to our private adapter structure
+ * @pMpRfd: pointer to a RFD
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h)
+ */
+int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
+{
+	pMpRfd->Packet = NULL;
+
+	return 0;
+}
+
+/**
+ * et131x_rfd_resources_free - Free the packet allocated for the given RFD
+ * @adapter: pointer to our private adapter structure
+ * @pMpRfd: pointer to a RFD
+ */
+void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
+{
+	pMpRfd->Packet = NULL;
+	kmem_cache_free(adapter->RxRing.RecvLookaside, pMpRfd);
+}
+
+/**
+ * ConfigRxDmaRegs - Start of Rx_DMA init sequence
+ * @pAdapter: pointer to our adapter structure
+ */
+void ConfigRxDmaRegs(struct et131x_adapter *pAdapter)
+{
+	struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma;
+	struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
+	PFBR_DESC_t pFbrEntry;
+	uint32_t iEntry;
+	RXDMA_PSR_NUM_DES_t psr_num_des;
+	unsigned long lockflags;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Halt RXDMA to perform the reconfigure.  */
+	et131x_rx_dma_disable(pAdapter);
+
+	/* Load the completion writeback physical address
+	 *
+	 * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
+	 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+	 * are ever returned, make sure the high part is retrieved here
+	 * before storing the adjusted address.
+	 */
+	writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32),
+	       &pRxDma->dma_wb_base_hi);
+	writel((uint32_t) pRxLocal->RxStatusRealPA, &pRxDma->dma_wb_base_lo);
+
+	memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t));
+
+	/* Set the address and parameters of the packet status ring into the
+	 * 1310's registers
+	 */
+	writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32),
+	       &pRxDma->psr_base_hi);
+	writel((uint32_t) pRxLocal->pPSRingRealPa, &pRxDma->psr_base_lo);
+	writel(pRxLocal->PsrNumEntries - 1, &pRxDma->psr_num_des.value);
+	writel(0, &pRxDma->psr_full_offset.value);
+
+	psr_num_des.value = readl(&pRxDma->psr_num_des.value);
+	writel((psr_num_des.bits.psr_ndes * LO_MARK_PERCENT_FOR_PSR) / 100,
+	       &pRxDma->psr_min_des.value);
+
+	spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
+
+	/* These local variables track the PSR in the adapter structure */
+	pRxLocal->local_psr_full.bits.psr_full = 0;
+	pRxLocal->local_psr_full.bits.psr_full_wrap = 0;
+
+	/* Now's the best time to initialize FBR1 contents */
+	pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa;
+	for (iEntry = 0; iEntry < pRxLocal->Fbr1NumEntries; iEntry++) {
+		pFbrEntry->addr_hi = pRxLocal->Fbr[1]->PAHigh[iEntry];
+		pFbrEntry->addr_lo = pRxLocal->Fbr[1]->PALow[iEntry];
+		pFbrEntry->word2.bits.bi = iEntry;
+		pFbrEntry++;
+	}
+
+	/* Set the address and parameters of Free buffer ring 1 (and 0 if
+	 * required) into the 1310's registers
+	 */
+	writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &pRxDma->fbr1_base_hi);
+	writel((uint32_t) pRxLocal->Fbr1Realpa, &pRxDma->fbr1_base_lo);
+	writel(pRxLocal->Fbr1NumEntries - 1, &pRxDma->fbr1_num_des.value);
+
+	{
+		DMA10W_t fbr1_full = { 0 };
+
+		fbr1_full.bits.val = 0;
+		fbr1_full.bits.wrap = 1;
+		writel(fbr1_full.value, &pRxDma->fbr1_full_offset.value);
+	}
+
+	/* This variable tracks the free buffer ring 1 full position, so it
+	 * has to match the above.
+	 */
+	pRxLocal->local_Fbr1_full.bits.val = 0;
+	pRxLocal->local_Fbr1_full.bits.wrap = 1;
+	writel(((pRxLocal->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+	       &pRxDma->fbr1_min_des.value);
+
+#ifdef USE_FBR0
+	/* Now's the best time to initialize FBR0 contents */
+	pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa;
+	for (iEntry = 0; iEntry < pRxLocal->Fbr0NumEntries; iEntry++) {
+		pFbrEntry->addr_hi = pRxLocal->Fbr[0]->PAHigh[iEntry];
+		pFbrEntry->addr_lo = pRxLocal->Fbr[0]->PALow[iEntry];
+		pFbrEntry->word2.bits.bi = iEntry;
+		pFbrEntry++;
+	}
+
+	writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &pRxDma->fbr0_base_hi);
+	writel((uint32_t) pRxLocal->Fbr0Realpa, &pRxDma->fbr0_base_lo);
+	writel(pRxLocal->Fbr0NumEntries - 1, &pRxDma->fbr0_num_des.value);
+
+	{
+		DMA10W_t fbr0_full = { 0 };
+
+		fbr0_full.bits.val = 0;
+		fbr0_full.bits.wrap = 1;
+		writel(fbr0_full.value, &pRxDma->fbr0_full_offset.value);
+	}
+
+	/* This variable tracks the free buffer ring 0 full position, so it
+	 * has to match the above.
+	 */
+	pRxLocal->local_Fbr0_full.bits.val = 0;
+	pRxLocal->local_Fbr0_full.bits.wrap = 1;
+	writel(((pRxLocal->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+	       &pRxDma->fbr0_min_des.value);
+#endif
+
+	/* Program the number of packets we will receive before generating an
+	 * interrupt.
+	 * For version B silicon, this value gets updated once autoneg is
+	 *complete.
+	 */
+	writel(pAdapter->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value);
+
+	/* The "time_done" is not working correctly to coalesce interrupts
+	 * after a given time period, but rather is giving us an interrupt
+	 * regardless of whether we have received packets.
+	 * This value gets updated once autoneg is complete.
+	 */
+	writel(pAdapter->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value);
+
+	spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * SetRxDmaTimer - Set the heartbeat timer according to line rate.
+ * @pAdapter: pointer to our adapter structure
+ */
+void SetRxDmaTimer(struct et131x_adapter *pAdapter)
+{
+	/* For version B silicon, we do not use the RxDMA timer for 10 and 100
+	 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing.
+	 */
+	if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) ||
+	    (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) {
+		writel(0, &pAdapter->CSRAddress->rxdma.max_pkt_time.value);
+		writel(1, &pAdapter->CSRAddress->rxdma.num_pkt_done.value);
+	}
+}
+
+/**
+ * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310
+ * @pAdapter: pointer to our adapter structure
+ */
+void et131x_rx_dma_disable(struct et131x_adapter *pAdapter)
+{
+	RXDMA_CSR_t csr;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Setup the receive dma configuration register */
+	writel(0x00002001, &pAdapter->CSRAddress->rxdma.csr.value);
+	csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+	if (csr.bits.halt_status != 1) {
+		udelay(5);
+		csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+		if (csr.bits.halt_status != 1) {
+			DBG_ERROR(et131x_dbginfo,
+				  "RX Dma failed to enter halt state. CSR 0x%08x\n",
+				  csr.value);
+		}
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310.
+ * @pAdapter: pointer to our adapter structure
+ */
+void et131x_rx_dma_enable(struct et131x_adapter *pAdapter)
+{
+	DBG_RX_ENTER(et131x_dbginfo);
+
+	if (pAdapter->RegistryPhyLoopbk) {
+	/* RxDMA is disabled for loopback operation. */
+		writel(0x1, &pAdapter->CSRAddress->rxdma.csr.value);
+	} else {
+	/* Setup the receive dma configuration register for normal operation */
+		RXDMA_CSR_t csr = { 0 };
+
+		csr.bits.fbr1_enable = 1;
+		if (pAdapter->RxRing.Fbr1BufferSize == 4096) {
+			csr.bits.fbr1_size = 1;
+		} else if (pAdapter->RxRing.Fbr1BufferSize == 8192) {
+			csr.bits.fbr1_size = 2;
+		} else if (pAdapter->RxRing.Fbr1BufferSize == 16384) {
+			csr.bits.fbr1_size = 3;
+		}
+#ifdef USE_FBR0
+		csr.bits.fbr0_enable = 1;
+		if (pAdapter->RxRing.Fbr0BufferSize == 256) {
+			csr.bits.fbr0_size = 1;
+		} else if (pAdapter->RxRing.Fbr0BufferSize == 512) {
+			csr.bits.fbr0_size = 2;
+		} else if (pAdapter->RxRing.Fbr0BufferSize == 1024) {
+			csr.bits.fbr0_size = 3;
+		}
+#endif
+		writel(csr.value, &pAdapter->CSRAddress->rxdma.csr.value);
+
+		csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+		if (csr.bits.halt_status != 0) {
+			udelay(5);
+			csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+			if (csr.bits.halt_status != 0) {
+				DBG_ERROR(et131x_dbginfo,
+					  "RX Dma failed to exit halt state.  CSR 0x%08x\n",
+					  csr.value);
+			}
+		}
+	}
+
+	DBG_RX_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * nic_rx_pkts - Checks the hardware for available packets
+ * @pAdapter: pointer to our adapter
+ *
+ * Returns pMpRfd, a pointer to our MPRFD.
+ *
+ * Checks the hardware for available packets, using completion ring
+ * If packets are available, it gets an RFD from the RecvList, attaches
+ * the packet to it, puts the RFD in the RecvPendList, and also returns
+ * the pointer to the RFD.
+ */
+PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter)
+{
+	struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
+	PRX_STATUS_BLOCK_t pRxStatusBlock;
+	PPKT_STAT_DESC_t pPSREntry;
+	PMP_RFD pMpRfd;
+	uint32_t nIndex;
+	uint8_t *pBufVa;
+	unsigned long lockflags;
+	struct list_head *element;
+	uint8_t ringIndex;
+	uint16_t bufferIndex;
+	uint32_t localLen;
+	PKT_STAT_DESC_WORD0_t Word0;
+
+
+	DBG_RX_ENTER(et131x_dbginfo);
+
+	/* RX Status block is written by the DMA engine prior to every
+	 * interrupt. It contains the next to be used entry in the Packet
+	 * Status Ring, and also the two Free Buffer rings.
+	 */
+	pRxStatusBlock = (PRX_STATUS_BLOCK_t) pRxLocal->pRxStatusVa;
+
+	if (pRxStatusBlock->Word1.bits.PSRoffset ==
+			pRxLocal->local_psr_full.bits.psr_full &&
+	    pRxStatusBlock->Word1.bits.PSRwrap ==
+	    		pRxLocal->local_psr_full.bits.psr_full_wrap) {
+		/* Looks like this ring is not updated yet */
+		DBG_RX(et131x_dbginfo, "(0)\n");
+		DBG_RX_LEAVE(et131x_dbginfo);
+		return NULL;
+	}
+
+	/* The packet status ring indicates that data is available. */
+	pPSREntry = (PPKT_STAT_DESC_t) (pRxLocal->pPSRingVa) +
+			pRxLocal->local_psr_full.bits.psr_full;
+
+	/* Grab any information that is required once the PSR is
+	 * advanced, since we can no longer rely on the memory being
+	 * accurate
+	 */
+	localLen = pPSREntry->word1.bits.length;
+	ringIndex = (uint8_t) pPSREntry->word1.bits.ri;
+	bufferIndex = (uint16_t) pPSREntry->word1.bits.bi;
+	Word0 = pPSREntry->word0;
+
+	DBG_RX(et131x_dbginfo, "RX PACKET STATUS\n");
+	DBG_RX(et131x_dbginfo, "\tlength      : %d\n", localLen);
+	DBG_RX(et131x_dbginfo, "\tringIndex   : %d\n", ringIndex);
+	DBG_RX(et131x_dbginfo, "\tbufferIndex : %d\n", bufferIndex);
+	DBG_RX(et131x_dbginfo, "\tword0       : 0x%08x\n", Word0.value);
+
+#if 0
+	/* Check the Status Word that the MAC has appended to the PSR
+	 * entry in case the MAC has detected errors.
+	 */
+	if (Word0.value & ALCATEL_BAD_STATUS) {
+		DBG_ERROR(et131x_dbginfo,
+			  "NICRxPkts >> Alcatel Status Word error."
+			  "Value 0x%08x\n", pPSREntry->word0.value);
+	}
+#endif
+
+	/* Indicate that we have used this PSR entry. */
+	if (++pRxLocal->local_psr_full.bits.psr_full >
+	    pRxLocal->PsrNumEntries - 1) {
+		pRxLocal->local_psr_full.bits.psr_full = 0;
+		pRxLocal->local_psr_full.bits.psr_full_wrap ^= 1;
+	}
+
+	writel(pRxLocal->local_psr_full.value,
+	       &pAdapter->CSRAddress->rxdma.psr_full_offset.value);
+
+#ifndef USE_FBR0
+	if (ringIndex != 1) {
+		DBG_ERROR(et131x_dbginfo,
+			  "NICRxPkts PSR Entry %d indicates "
+			  "Buffer Ring 0 in use\n",
+			  pRxLocal->local_psr_full.bits.psr_full);
+		DBG_RX_LEAVE(et131x_dbginfo);
+		return NULL;
+	}
+#endif
+
+#ifdef USE_FBR0
+	if (ringIndex > 1 ||
+	    (ringIndex == 0 &&
+	     bufferIndex > pRxLocal->Fbr0NumEntries - 1) ||
+	    (ringIndex == 1 &&
+	     bufferIndex > pRxLocal->Fbr1NumEntries - 1))
+#else
+	if (ringIndex != 1 ||
+	    bufferIndex > pRxLocal->Fbr1NumEntries - 1)
+#endif
+	{
+		/* Illegal buffer or ring index cannot be used by S/W*/
+		DBG_ERROR(et131x_dbginfo,
+			  "NICRxPkts PSR Entry %d indicates "
+			  "length of %d and/or bad bi(%d)\n",
+			  pRxLocal->local_psr_full.bits.psr_full,
+			  localLen, bufferIndex);
+		DBG_RX_LEAVE(et131x_dbginfo);
+		return NULL;
+	}
+
+	/* Get and fill the RFD. */
+	spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
+
+	pMpRfd = NULL;
+	element = pRxLocal->RecvList.next;
+	pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
+
+	if (pMpRfd == NULL) {
+		DBG_RX(et131x_dbginfo,
+		       "NULL RFD returned from RecvList via list_entry()\n");
+		DBG_RX_LEAVE(et131x_dbginfo);
+		spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+		return NULL;
+	}
+
+	list_del(&pMpRfd->list_node);
+	pRxLocal->nReadyRecv--;
+
+	spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+
+	pMpRfd->iBufferIndex = bufferIndex;
+	pMpRfd->iRingIndex = ringIndex;
+
+	/* In V1 silicon, there is a bug which screws up filtering of
+	 * runt packets.  Therefore runt packet filtering is disabled
+	 * in the MAC and the packets are dropped here.  They are
+	 * also counted here.
+	 */
+	if (localLen < (NIC_MIN_PACKET_SIZE + 4)) {
+		pAdapter->Stats.other_errors++;
+		localLen = 0;
+	}
+
+	if (localLen) {
+		if (pAdapter->ReplicaPhyLoopbk == 1) {
+			pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex];
+
+			if (memcmp(&pBufVa[6], &pAdapter->CurrentAddress[0],
+				   ETH_ALEN) == 0) {
+				if (memcmp(&pBufVa[42], "Replica packet",
+					   ETH_HLEN)) {
+					pAdapter->ReplicaPhyLoopbkPF = 1;
+				}
+			}
+			DBG_WARNING(et131x_dbginfo,
+				    "pBufVa:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+				    pBufVa[6], pBufVa[7], pBufVa[8],
+				    pBufVa[9], pBufVa[10], pBufVa[11]);
+
+			DBG_WARNING(et131x_dbginfo,
+				    "CurrentAddr:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+				    pAdapter->CurrentAddress[0],
+				    pAdapter->CurrentAddress[1],
+				    pAdapter->CurrentAddress[2],
+				    pAdapter->CurrentAddress[3],
+				    pAdapter->CurrentAddress[4],
+				    pAdapter->CurrentAddress[5]);
+		}
+
+		/* Determine if this is a multicast packet coming in */
+		if ((Word0.value & ALCATEL_MULTICAST_PKT) &&
+		    !(Word0.value & ALCATEL_BROADCAST_PKT)) {
+			/* Promiscuous mode and Multicast mode are
+			 * not mutually exclusive as was first
+			 * thought.  I guess Promiscuous is just
+			 * considered a super-set of the other
+			 * filters. Generally filter is 0x2b when in
+			 * promiscuous mode.
+			 */
+			if ((pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST)
+			    && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS)
+			    && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
+				pBufVa = pRxLocal->Fbr[ringIndex]->
+						Va[bufferIndex];
+
+				/* Loop through our list to see if the
+				 * destination address of this packet
+				 * matches one in our list.
+				 */
+				for (nIndex = 0;
+				     nIndex < pAdapter->MCAddressCount;
+				     nIndex++) {
+					if (pBufVa[0] ==
+					    pAdapter->MCList[nIndex][0]
+					    && pBufVa[1] ==
+					    pAdapter->MCList[nIndex][1]
+					    && pBufVa[2] ==
+					    pAdapter->MCList[nIndex][2]
+					    && pBufVa[3] ==
+					    pAdapter->MCList[nIndex][3]
+					    && pBufVa[4] ==
+					    pAdapter->MCList[nIndex][4]
+					    && pBufVa[5] ==
+					    pAdapter->MCList[nIndex][5]) {
+						break;
+					}
+				}
+
+				/* If our index is equal to the number
+				 * of Multicast address we have, then
+				 * this means we did not find this
+				 * packet's matching address in our
+				 * list.  Set the PacketSize to zero,
+				 * so we free our RFD when we return
+				 * from this function.
+				 */
+				if (nIndex == pAdapter->MCAddressCount) {
+					localLen = 0;
+				}
+			}
+
+			if (localLen > 0) {
+				pAdapter->Stats.multircv++;
+			}
+		} else if (Word0.value & ALCATEL_BROADCAST_PKT) {
+			pAdapter->Stats.brdcstrcv++;
+		} else {
+			/* Not sure what this counter measures in
+			 * promiscuous mode. Perhaps we should check
+			 * the MAC address to see if it is directed
+			 * to us in promiscuous mode.
+			 */
+			pAdapter->Stats.unircv++;
+		}
+	}
+
+	if (localLen > 0) {
+		struct sk_buff *skb = NULL;
+
+		//pMpRfd->PacketSize = localLen - 4;
+		pMpRfd->PacketSize = localLen;
+
+		skb = dev_alloc_skb(pMpRfd->PacketSize + 2);
+		if (!skb) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Couldn't alloc an SKB for Rx\n");
+			DBG_RX_LEAVE(et131x_dbginfo);
+			return NULL;
+		}
+
+		pAdapter->net_stats.rx_bytes += pMpRfd->PacketSize;
+
+		memcpy(skb_put(skb, pMpRfd->PacketSize),
+		       pRxLocal->Fbr[ringIndex]->Va[bufferIndex],
+		       pMpRfd->PacketSize);
+
+		skb->dev = pAdapter->netdev;
+		skb->protocol = eth_type_trans(skb, pAdapter->netdev);
+		skb->ip_summed = CHECKSUM_NONE;
+
+		netif_rx(skb);
+	} else {
+		pMpRfd->PacketSize = 0;
+	}
+
+	nic_return_rfd(pAdapter, pMpRfd);
+
+	DBG_RX(et131x_dbginfo, "(1)\n");
+	DBG_RX_LEAVE(et131x_dbginfo);
+	return pMpRfd;
+}
+
+/**
+ * et131x_reset_recv - Reset the receive list
+ * @pAdapter: pointer to our adapter
+ *
+ * Assumption, Rcv spinlock has been acquired.
+ */
+void et131x_reset_recv(struct et131x_adapter *pAdapter)
+{
+	PMP_RFD pMpRfd;
+	struct list_head *element;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	DBG_ASSERT(!list_empty(&pAdapter->RxRing.RecvList));
+
+	/* Take all the RFD's from the pending list, and stick them on the
+	 * RecvList.
+	 */
+	while (!list_empty(&pAdapter->RxRing.RecvPendingList)) {
+		element = pAdapter->RxRing.RecvPendingList.next;
+
+		pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
+
+		list_del(&pMpRfd->list_node);
+		list_add_tail(&pMpRfd->list_node, &pAdapter->RxRing.RecvList);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_handle_recv_interrupt - Interrupt handler for receive processing
+ * @pAdapter: pointer to our adapter
+ *
+ * Assumption, Rcv spinlock has been acquired.
+ */
+void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter)
+{
+	PMP_RFD pMpRfd = NULL;
+	struct sk_buff *PacketArray[NUM_PACKETS_HANDLED];
+	PMP_RFD RFDFreeArray[NUM_PACKETS_HANDLED];
+	uint32_t PacketArrayCount = 0;
+	uint32_t PacketsToHandle;
+	uint32_t PacketFreeCount = 0;
+	bool TempUnfinishedRec = false;
+
+	DBG_RX_ENTER(et131x_dbginfo);
+
+	PacketsToHandle = NUM_PACKETS_HANDLED;
+
+	/* Process up to available RFD's */
+	while (PacketArrayCount < PacketsToHandle) {
+		if (list_empty(&pAdapter->RxRing.RecvList)) {
+			DBG_ASSERT(pAdapter->RxRing.nReadyRecv == 0);
+			DBG_ERROR(et131x_dbginfo, "NO RFD's !!!!!!!!!!!!!\n");
+			TempUnfinishedRec = true;
+			break;
+		}
+
+		pMpRfd = nic_rx_pkts(pAdapter);
+
+		if (pMpRfd == NULL) {
+			break;
+		}
+
+		/* Do not receive any packets until a filter has been set.
+		 * Do not receive any packets until we are at D0.
+		 * Do not receive any packets until we have link.
+		 * If length is zero, return the RFD in order to advance the
+		 * Free buffer ring.
+		 */
+		if ((!pAdapter->PacketFilter) ||
+		    (pAdapter->PoMgmt.PowerState != NdisDeviceStateD0) ||
+		    (!MP_LINK_DETECTED(pAdapter)) ||
+		    (pMpRfd->PacketSize == 0)) {
+			continue;
+		}
+
+		/* Increment the number of packets we received */
+		pAdapter->Stats.ipackets++;
+
+		/* Set the status on the packet, either resources or success */
+		if (pAdapter->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) {
+			/* Put this RFD on the pending list
+			 *
+			 * NOTE: nic_rx_pkts() above is already returning the
+			 * RFD to the RecvList, so don't additionally do that
+			 * here.
+			 * Besides, we don't really need (at this point) the
+			 * pending list anyway.
+			 */
+			//spin_lock_irqsave( &pAdapter->RcvPendLock, lockflags );
+			//list_add_tail( &pMpRfd->list_node, &pAdapter->RxRing.RecvPendingList );
+			//spin_unlock_irqrestore( &pAdapter->RcvPendLock, lockflags );
+
+			/* Update the number of outstanding Recvs */
+			//MP_INC_RCV_REF( pAdapter );
+		} else {
+			RFDFreeArray[PacketFreeCount] = pMpRfd;
+			PacketFreeCount++;
+
+			DBG_WARNING(et131x_dbginfo,
+				    "RFD's are running out !!!!!!!!!!!!!\n");
+		}
+
+		PacketArray[PacketArrayCount] = pMpRfd->Packet;
+		PacketArrayCount++;
+	}
+
+	if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) {
+		pAdapter->RxRing.UnfinishedReceives = true;
+		writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
+		       &pAdapter->CSRAddress->global.watchdog_timer);
+	} else {
+		/* Watchdog timer will disable itself if appropriate. */
+		pAdapter->RxRing.UnfinishedReceives = false;
+	}
+
+	DBG_RX_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * NICReturnRFD - Recycle a RFD and put it back onto the receive list
+ * @pAdapter: pointer to our adapter
+ * @pMpRfd: pointer to the RFD
+ */
+void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd)
+{
+	struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
+	struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma;
+	uint16_t bi = pMpRfd->iBufferIndex;
+	uint8_t ri = pMpRfd->iRingIndex;
+	unsigned long lockflags;
+
+	DBG_RX_ENTER(et131x_dbginfo);
+
+	/* We don't use any of the OOB data besides status. Otherwise, we
+	 * need to clean up OOB data
+	 */
+	if (
+#ifdef USE_FBR0
+	    (ri == 0 && bi < pRxLocal->Fbr0NumEntries) ||
+#endif
+	    (ri == 1 && bi < pRxLocal->Fbr1NumEntries)) {
+		spin_lock_irqsave(&pAdapter->FbrLock, lockflags);
+
+		if (ri == 1) {
+			PFBR_DESC_t pNextDesc =
+			    (PFBR_DESC_t) (pRxLocal->pFbr1RingVa) +
+			    pRxLocal->local_Fbr1_full.bits.val;
+
+			/* Handle the Free Buffer Ring advancement here. Write
+			 * the PA / Buffer Index for the returned buffer into
+			 * the oldest (next to be freed)FBR entry
+			 */
+			pNextDesc->addr_hi = pRxLocal->Fbr[1]->PAHigh[bi];
+			pNextDesc->addr_lo = pRxLocal->Fbr[1]->PALow[bi];
+			pNextDesc->word2.value = bi;
+
+			if (++pRxLocal->local_Fbr1_full.bits.val >
+			    (pRxLocal->Fbr1NumEntries - 1)) {
+				pRxLocal->local_Fbr1_full.bits.val = 0;
+				pRxLocal->local_Fbr1_full.bits.wrap ^= 1;
+			}
+
+			writel(pRxLocal->local_Fbr1_full.value,
+			       &pRxDma->fbr1_full_offset.value);
+		}
+#ifdef USE_FBR0
+		else {
+			PFBR_DESC_t pNextDesc =
+			    (PFBR_DESC_t) pRxLocal->pFbr0RingVa +
+			    pRxLocal->local_Fbr0_full.bits.val;
+
+			/* Handle the Free Buffer Ring advancement here. Write
+			 * the PA / Buffer Index for the returned buffer into
+			 * the oldest (next to be freed) FBR entry
+			 */
+			pNextDesc->addr_hi = pRxLocal->Fbr[0]->PAHigh[bi];
+			pNextDesc->addr_lo = pRxLocal->Fbr[0]->PALow[bi];
+			pNextDesc->word2.value = bi;
+
+			if (++pRxLocal->local_Fbr0_full.bits.val >
+			    (pRxLocal->Fbr0NumEntries - 1)) {
+				pRxLocal->local_Fbr0_full.bits.val = 0;
+				pRxLocal->local_Fbr0_full.bits.wrap ^= 1;
+			}
+
+			writel(pRxLocal->local_Fbr0_full.value,
+			       &pRxDma->fbr0_full_offset.value);
+		}
+#endif
+		spin_unlock_irqrestore(&pAdapter->FbrLock, lockflags);
+	} else {
+		DBG_ERROR(et131x_dbginfo,
+			  "NICReturnRFD illegal Buffer Index returned\n");
+	}
+
+	/* The processing on this RFD is done, so put it back on the tail of
+	 * our list
+	 */
+	spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
+	list_add_tail(&pMpRfd->list_node, &pRxLocal->RecvList);
+	pRxLocal->nReadyRecv++;
+	spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+
+	DBG_ASSERT(pRxLocal->nReadyRecv <= pRxLocal->NumRfd);
+	DBG_RX_LEAVE(et131x_dbginfo);
+}

drivers/staging/et131x/et1310_rx.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_rx.h - Defines, structs, enums, prototypes, etc. pertaining to data
+ *               reception.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_RX_H__
+#define __ET1310_RX_H__
+
+#include "et1310_address_map.h"
+
+#define USE_FBR0 true
+
+#ifdef USE_FBR0
+//#define FBR0_BUFFER_SIZE 256
+#endif
+
+//#define FBR1_BUFFER_SIZE 2048
+
+#define FBR_CHUNKS 32
+
+#define MAX_DESC_PER_RING_RX         1024
+
+/* number of RFDs - default and min */
+#ifdef USE_FBR0
+#define RFD_LOW_WATER_MARK	40
+#define NIC_MIN_NUM_RFD		64
+#define NIC_DEFAULT_NUM_RFD	1024
+#else
+#define RFD_LOW_WATER_MARK	20
+#define NIC_MIN_NUM_RFD		64
+#define NIC_DEFAULT_NUM_RFD	256
+#endif
+
+#define NUM_PACKETS_HANDLED	256
+
+#define ALCATEL_BAD_STATUS	0xe47f0000
+#define ALCATEL_MULTICAST_PKT	0x01000000
+#define ALCATEL_BROADCAST_PKT	0x02000000
+
+/* typedefs for Free Buffer Descriptors */
+typedef union _FBR_WORD2_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 reserved:22;	// bits 10-31
+		u32 bi:10;		// bits 0-9(Buffer Index)
+#else
+		u32 bi:10;		// bits 0-9(Buffer Index)
+		u32 reserved:22;	// bit 10-31
+#endif
+	} bits;
+} FBR_WORD2_t, *PFBR_WORD2_t;
+
+typedef struct _FBR_DESC_t {
+	u32 addr_lo;
+	u32 addr_hi;
+	FBR_WORD2_t word2;
+} FBR_DESC_t, *PFBR_DESC_t;
+
+/* Typedefs for Packet Status Ring Descriptors */
+typedef union _PKT_STAT_DESC_WORD0_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		// top 16 bits are from the Alcatel Status Word as enumerated in
+		// PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2)
+#if 0
+		u32 asw_trunc:1;		// bit 31(Rx frame truncated)
+#endif
+		u32 asw_long_evt:1;	// bit 31(Rx long event)
+		u32 asw_VLAN_tag:1;	// bit 30(VLAN tag detected)
+		u32 asw_unsupported_op:1;	// bit 29(unsupported OP code)
+		u32 asw_pause_frame:1;	// bit 28(is a pause frame)
+		u32 asw_control_frame:1;	// bit 27(is a control frame)
+		u32 asw_dribble_nibble:1;	// bit 26(spurious bits after EOP)
+		u32 asw_broadcast:1;	// bit 25(has a broadcast address)
+		u32 asw_multicast:1;	// bit 24(has a multicast address)
+		u32 asw_OK:1;		// bit 23(valid CRC + no code error)
+		u32 asw_too_long:1;	// bit 22(frame length > 1518 bytes)
+		u32 asw_len_chk_err:1;	// bit 21(frame length field incorrect)
+		u32 asw_CRC_err:1;		// bit 20(CRC error)
+		u32 asw_code_err:1;	// bit 19(one or more nibbles signalled as errors)
+		u32 asw_false_carrier_event:1;	// bit 18(bad carrier since last good packet)
+		u32 asw_RX_DV_event:1;	// bit 17(short receive event detected)
+		u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous)
+		u32 unused:5;		// bits 11-15
+		u32 vp:1;			// bit 10(VLAN Packet)
+		u32 jp:1;			// bit 9(Jumbo Packet)
+		u32 ft:1;			// bit 8(Frame Truncated)
+		u32 drop:1;		// bit 7(Drop packet)
+		u32 rxmac_error:1;		// bit 6(RXMAC Error Indicator)
+		u32 wol:1;			// bit 5(WOL Event)
+		u32 tcpp:1;		// bit 4(TCP checksum pass)
+		u32 tcpa:1;		// bit 3(TCP checksum assist)
+		u32 ipp:1;			// bit 2(IP checksum pass)
+		u32 ipa:1;			// bit 1(IP checksum assist)
+		u32 hp:1;			// bit 0(hash pass)
+#else
+		u32 hp:1;			// bit 0(hash pass)
+		u32 ipa:1;			// bit 1(IP checksum assist)
+		u32 ipp:1;			// bit 2(IP checksum pass)
+		u32 tcpa:1;		// bit 3(TCP checksum assist)
+		u32 tcpp:1;		// bit 4(TCP checksum pass)
+		u32 wol:1;			// bit 5(WOL Event)
+		u32 rxmac_error:1;		// bit 6(RXMAC Error Indicator)
+		u32 drop:1;		// bit 7(Drop packet)
+		u32 ft:1;			// bit 8(Frame Truncated)
+		u32 jp:1;			// bit 9(Jumbo Packet)
+		u32 vp:1;			// bit 10(VLAN Packet)
+		u32 unused:5;		// bits 11-15
+		u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous)
+		u32 asw_RX_DV_event:1;	// bit 17(short receive event detected)
+		u32 asw_false_carrier_event:1;	// bit 18(bad carrier since last good packet)
+		u32 asw_code_err:1;	// bit 19(one or more nibbles signalled as errors)
+		u32 asw_CRC_err:1;		// bit 20(CRC error)
+		u32 asw_len_chk_err:1;	// bit 21(frame length field incorrect)
+		u32 asw_too_long:1;	// bit 22(frame length > 1518 bytes)
+		u32 asw_OK:1;		// bit 23(valid CRC + no code error)
+		u32 asw_multicast:1;	// bit 24(has a multicast address)
+		u32 asw_broadcast:1;	// bit 25(has a broadcast address)
+		u32 asw_dribble_nibble:1;	// bit 26(spurious bits after EOP)
+		u32 asw_control_frame:1;	// bit 27(is a control frame)
+		u32 asw_pause_frame:1;	// bit 28(is a pause frame)
+		u32 asw_unsupported_op:1;	// bit 29(unsupported OP code)
+		u32 asw_VLAN_tag:1;	// bit 30(VLAN tag detected)
+		u32 asw_long_evt:1;	// bit 31(Rx long event)
+#if 0
+		u32 asw_trunc:1;		// bit 31(Rx frame truncated)
+#endif
+#endif
+	} bits;
+} PKT_STAT_DESC_WORD0_t, *PPKT_STAT_WORD0_t;
+
+typedef union _PKT_STAT_DESC_WORD1_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:4;	// bits 28-31
+		u32 ri:2;		// bits 26-27(Ring Index)
+		u32 bi:10;		// bits 16-25(Buffer Index)
+		u32 length:16;	// bit 0-15(length in bytes)
+#else
+		u32 length:16;	// bit 0-15(length in bytes)
+		u32 bi:10;		// bits 16-25(Buffer Index)
+		u32 ri:2;		// bits 26-27(Ring Index)
+		u32 unused:4;	// bits 28-31
+#endif
+	} bits;
+} PKT_STAT_DESC_WORD1_t, *PPKT_STAT_WORD1_t;
+
+typedef struct _PKT_STAT_DESC_t {
+	PKT_STAT_DESC_WORD0_t word0;
+	PKT_STAT_DESC_WORD1_t word1;
+} PKT_STAT_DESC_t, *PPKT_STAT_DESC_t;
+
+/* Typedefs for the RX DMA status word */
+
+/*
+ * RXSTAT_WORD0_t structure holds part of the status bits of the Rx DMA engine
+ * that get copied out to memory by the ET-1310.  Word 0 is a 32 bit word
+ * whichcontains Free Buffer ring 0 and 1 available offset.
+ */
+typedef union _rxstat_word0_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 FBR1unused:5;	// bits 27-31
+		u32 FBR1wrap:1;	// bit 26
+		u32 FBR1offset:10;	// bits 16-25
+		u32 FBR0unused:5;	// bits 11-15
+		u32 FBR0wrap:1;	// bit 10
+		u32 FBR0offset:10;	// bits 0-9
+#else
+		u32 FBR0offset:10;	// bits 0-9
+		u32 FBR0wrap:1;	// bit 10
+		u32 FBR0unused:5;	// bits 11-15
+		u32 FBR1offset:10;	// bits 16-25
+		u32 FBR1wrap:1;	// bit 26
+		u32 FBR1unused:5;	// bits 27-31
+#endif
+	} bits;
+} RXSTAT_WORD0_t, *PRXSTAT_WORD0_t;
+
+/*
+ * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine
+ * that get copied out to memory by the ET-1310.  Word 3 is a 32 bit word
+ * which contains the Packet Status Ring available offset.
+ */
+typedef union _rxstat_word1_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 PSRunused:3;	// bits 29-31
+		u32 PSRwrap:1;	// bit 28
+		u32 PSRoffset:12;	// bits 16-27
+		u32 reserved:16;	// bits 0-15
+#else
+		u32 reserved:16;	// bits 0-15
+		u32 PSRoffset:12;	// bits 16-27
+		u32 PSRwrap:1;	// bit 28
+		u32 PSRunused:3;	// bits 29-31
+#endif
+	} bits;
+} RXSTAT_WORD1_t, *PRXSTAT_WORD1_t;
+
+/*
+ * RX_STATUS_BLOCK_t is sructure representing the status of the Rx DMA engine
+ * it sits in free memory, and is pointed to by 0x101c / 0x1020
+ */
+typedef struct _rx_status_block_t {
+	RXSTAT_WORD0_t Word0;
+	RXSTAT_WORD1_t Word1;
+} RX_STATUS_BLOCK_t, *PRX_STATUS_BLOCK_t;
+
+/*
+ * Structure for look-up table holding free buffer ring pointers
+ */
+typedef struct _FbrLookupTable {
+	void *Va[MAX_DESC_PER_RING_RX];
+	void *Buffer1[MAX_DESC_PER_RING_RX];
+	void *Buffer2[MAX_DESC_PER_RING_RX];
+	u32 PAHigh[MAX_DESC_PER_RING_RX];
+	u32 PALow[MAX_DESC_PER_RING_RX];
+} FBRLOOKUPTABLE, *PFBRLOOKUPTABLE;
+
+typedef enum {
+	ONE_PACKET_INTERRUPT,
+	FOUR_PACKET_INTERRUPT
+} eRX_INTERRUPT_STATE_t, *PeRX_INTERRUPT_STATE_t;
+
+/*
+ * Structure to hold the skb's in a list
+ */
+typedef struct rx_skb_list_elem {
+	struct list_head skb_list_elem;
+	dma_addr_t dma_addr;
+	struct sk_buff *skb;
+} RX_SKB_LIST_ELEM, *PRX_SKB_LIST_ELEM;
+
+/*
+ * RX_RING_t is sructure representing the adaptor's local reference(s) to the
+ * rings
+ */
+typedef struct _rx_ring_t {
+#ifdef USE_FBR0
+	void *pFbr0RingVa;
+	dma_addr_t pFbr0RingPa;
+	void *Fbr0MemVa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+	dma_addr_t Fbr0MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+	uint64_t Fbr0Realpa;
+	uint64_t Fbr0offset;
+	DMA10W_t local_Fbr0_full;
+	u32 Fbr0NumEntries;
+	u32 Fbr0BufferSize;
+#endif
+	void *pFbr1RingVa;
+	dma_addr_t pFbr1RingPa;
+	void *Fbr1MemVa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+	dma_addr_t Fbr1MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+	uint64_t Fbr1Realpa;
+	uint64_t Fbr1offset;
+	FBRLOOKUPTABLE *Fbr[2];
+	DMA10W_t local_Fbr1_full;
+	u32 Fbr1NumEntries;
+	u32 Fbr1BufferSize;
+
+	void *pPSRingVa;
+	dma_addr_t pPSRingPa;
+	uint64_t pPSRingRealPa;
+	uint64_t pPSRingOffset;
+	RXDMA_PSR_FULL_OFFSET_t local_psr_full;
+	u32 PsrNumEntries;
+
+	void *pRxStatusVa;
+	dma_addr_t pRxStatusPa;
+	uint64_t RxStatusRealPA;
+	uint64_t RxStatusOffset;
+
+	struct list_head RecvBufferPool;
+
+	/* RECV */
+	struct list_head RecvList;
+	struct list_head RecvPendingList;
+	u32 nReadyRecv;
+
+	u32 NumRfd;
+
+	bool UnfinishedReceives;
+
+	struct list_head RecvPacketPool;
+
+	/* lookaside lists */
+	struct kmem_cache *RecvLookaside;
+} RX_RING_t, *PRX_RING_t;
+
+/* Forward reference of RFD */
+struct _MP_RFD;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+/* PROTOTYPES for Initialization */
+int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter);
+void et131x_rx_dma_memory_free(struct et131x_adapter *adapter);
+int et131x_rfd_resources_alloc(struct et131x_adapter *adapter,
+			       struct _MP_RFD *pMpRfd);
+void et131x_rfd_resources_free(struct et131x_adapter *adapter,
+			       struct _MP_RFD *pMpRfd);
+int et131x_init_recv(struct et131x_adapter *adapter);
+
+void ConfigRxDmaRegs(struct et131x_adapter *adapter);
+void SetRxDmaTimer(struct et131x_adapter *adapter);
+void et131x_rx_dma_disable(struct et131x_adapter *adapter);
+void et131x_rx_dma_enable(struct et131x_adapter *adapter);
+
+void et131x_reset_recv(struct et131x_adapter *adapter);
+
+void et131x_handle_recv_interrupt(struct et131x_adapter *adapter);
+
+#endif /* __ET1310_RX_H__ */

drivers/staging/et131x/et1310_tx.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_tx.c - Routines used to perform data transmission.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+#include "et131x_isr.h"
+
+#include "et1310_tx.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+static void et131x_update_tcb_list(struct et131x_adapter *pAdapter);
+static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter);
+static inline void et131x_free_send_packet(struct et131x_adapter *pAdapter,
+					   PMP_TCB pMpTcb);
+static int et131x_send_packet(struct sk_buff *skb,
+			      struct et131x_adapter *pAdapter);
+static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb);
+
+/**
+ * et131x_tx_dma_memory_alloc
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h).
+ *
+ * Allocates memory that will be visible both to the device and to the CPU.
+ * The OS will pass us packets, pointers to which we will insert in the Tx
+ * Descriptor queue. The device will read this queue to find the packets in
+ * memory. The device will update the "status" in memory each time it xmits a
+ * packet.
+ */
+int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter)
+{
+	int desc_size = 0;
+	TX_RING_t *tx_ring = &adapter->TxRing;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Allocate memory for the TCB's (Transmit Control Block) */
+	adapter->TxRing.MpTcbMem = (MP_TCB *) kcalloc(NUM_TCB, sizeof(MP_TCB),
+						      GFP_ATOMIC | GFP_DMA);
+	if (!adapter->TxRing.MpTcbMem) {
+		DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for TCBs\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Allocate enough memory for the Tx descriptor ring, and allocate
+	 * some extra so that the ring can be aligned on a 4k boundary.
+	 */
+	desc_size = (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1;
+	tx_ring->pTxDescRingVa =
+	    (PTX_DESC_ENTRY_t) pci_alloc_consistent(adapter->pdev, desc_size,
+						    &tx_ring->pTxDescRingPa);
+	if (!adapter->TxRing.pTxDescRingVa) {
+		DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for Tx Ring\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Save physical address
+	 *
+	 * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+	 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+	 * are ever returned, make sure the high part is retrieved here before
+	 * storing the adjusted address.
+	 */
+	tx_ring->pTxDescRingAdjustedPa = tx_ring->pTxDescRingPa;
+
+	/* Align Tx Descriptor Ring on a 4k (0x1000) byte boundary */
+	et131x_align_allocated_memory(adapter,
+				      &tx_ring->pTxDescRingAdjustedPa,
+				      &tx_ring->TxDescOffset, 0x0FFF);
+
+	tx_ring->pTxDescRingVa += tx_ring->TxDescOffset;
+
+	/* Allocate memory for the Tx status block */
+	tx_ring->pTxStatusVa = pci_alloc_consistent(adapter->pdev,
+						    sizeof(TX_STATUS_BLOCK_t),
+						    &tx_ring->pTxStatusPa);
+	if (!adapter->TxRing.pTxStatusPa) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot alloc memory for Tx status block\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for a dummy buffer */
+	tx_ring->pTxDummyBlkVa = pci_alloc_consistent(adapter->pdev,
+						      NIC_MIN_PACKET_SIZE,
+						      &tx_ring->pTxDummyBlkPa);
+	if (!adapter->TxRing.pTxDummyBlkPa) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot alloc memory for Tx dummy buffer\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+/**
+ * et131x_tx_dma_memory_free - Free all memory allocated within this module
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h).
+ */
+void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
+{
+	int desc_size = 0;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	if (adapter->TxRing.pTxDescRingVa) {
+		/* Free memory relating to Tx rings here */
+		adapter->TxRing.pTxDescRingVa -= adapter->TxRing.TxDescOffset;
+
+		desc_size =
+		    (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1;
+
+		pci_free_consistent(adapter->pdev,
+				    desc_size,
+				    adapter->TxRing.pTxDescRingVa,
+				    adapter->TxRing.pTxDescRingPa);
+
+		adapter->TxRing.pTxDescRingVa = NULL;
+	}
+
+	/* Free memory for the Tx status block */
+	if (adapter->TxRing.pTxStatusVa) {
+		pci_free_consistent(adapter->pdev,
+				    sizeof(TX_STATUS_BLOCK_t),
+				    adapter->TxRing.pTxStatusVa,
+				    adapter->TxRing.pTxStatusPa);
+
+		adapter->TxRing.pTxStatusVa = NULL;
+	}
+
+	/* Free memory for the dummy buffer */
+	if (adapter->TxRing.pTxDummyBlkVa) {
+		pci_free_consistent(adapter->pdev,
+				    NIC_MIN_PACKET_SIZE,
+				    adapter->TxRing.pTxDummyBlkVa,
+				    adapter->TxRing.pTxDummyBlkPa);
+
+		adapter->TxRing.pTxDummyBlkVa = NULL;
+	}
+
+	/* Free the memory for MP_TCB structures */
+	if (adapter->TxRing.MpTcbMem) {
+		kfree(adapter->TxRing.MpTcbMem);
+		adapter->TxRing.MpTcbMem = NULL;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * ConfigTxDmaRegs - Set up the tx dma section of the JAGCore.
+ * @adapter: pointer to our private adapter structure
+ */
+void ConfigTxDmaRegs(struct et131x_adapter *pAdapter)
+{
+	struct _TXDMA_t __iomem *pTxDma = &pAdapter->CSRAddress->txdma;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Load the hardware with the start of the transmit descriptor ring. */
+	writel((uint32_t) (pAdapter->TxRing.pTxDescRingAdjustedPa >> 32),
+	       &pTxDma->pr_base_hi);
+	writel((uint32_t) pAdapter->TxRing.pTxDescRingAdjustedPa,
+	       &pTxDma->pr_base_lo);
+
+	/* Initialise the transmit DMA engine */
+	writel(NUM_DESC_PER_RING_TX - 1, &pTxDma->pr_num_des.value);
+
+	/* Load the completion writeback physical address
+	 *
+	 * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+	 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+	 * are ever returned, make sure the high part is retrieved here before
+	 * storing the adjusted address.
+	 */
+	writel(0, &pTxDma->dma_wb_base_hi);
+	writel(pAdapter->TxRing.pTxStatusPa, &pTxDma->dma_wb_base_lo);
+
+	memset(pAdapter->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t));
+
+	writel(0, &pTxDma->service_request.value);
+	pAdapter->TxRing.txDmaReadyToSend.value = 0;
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
+ * @pAdapter: pointer to our adapter structure
+ */
+void et131x_tx_dma_disable(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Setup the tramsmit dma configuration register */
+	writel(0x101, &pAdapter->CSRAddress->txdma.csr.value);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310.
+ * @pAdapter: pointer to our adapter structure
+ *
+ * Mainly used after a return to the D0 (full-power) state from a lower state.
+ */
+void et131x_tx_dma_enable(struct et131x_adapter *pAdapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	if (pAdapter->RegistryPhyLoopbk) {
+	/* TxDMA is disabled for loopback operation. */
+		writel(0x101, &pAdapter->CSRAddress->txdma.csr.value);
+	} else {
+		TXDMA_CSR_t csr = { 0 };
+
+		/* Setup the transmit dma configuration register for normal
+		 * operation
+		 */
+		csr.bits.sngl_epkt_mode = 1;
+		csr.bits.halt = 0;
+		csr.bits.cache_thrshld = pAdapter->RegistryDMACache;
+		writel(csr.value, &pAdapter->CSRAddress->txdma.csr.value);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_init_send - Initialize send data structures
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_init_send(struct et131x_adapter *adapter)
+{
+	PMP_TCB pMpTcb;
+	uint32_t TcbCount;
+	TX_RING_t *tx_ring;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Setup some convenience pointers */
+	tx_ring = &adapter->TxRing;
+	pMpTcb = adapter->TxRing.MpTcbMem;
+
+	tx_ring->TCBReadyQueueHead = pMpTcb;
+
+	/* Go through and set up each TCB */
+	for (TcbCount = 0; TcbCount < NUM_TCB; TcbCount++) {
+		memset(pMpTcb, 0, sizeof(MP_TCB));
+
+		/* Set the link pointer in HW TCB to the next TCB in the
+		 * chain.  If this is the last TCB in the chain, also set the
+		 * tail pointer.
+		 */
+		if (TcbCount < NUM_TCB - 1) {
+			pMpTcb->Next = pMpTcb + 1;
+		} else {
+			tx_ring->TCBReadyQueueTail = pMpTcb;
+			pMpTcb->Next = (PMP_TCB) NULL;
+		}
+
+		pMpTcb++;
+	}
+
+	/* Curr send queue should now be empty */
+	tx_ring->CurrSendHead = (PMP_TCB) NULL;
+	tx_ring->CurrSendTail = (PMP_TCB) NULL;
+
+	INIT_LIST_HEAD(&adapter->TxRing.SendWaitQueue);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_send_packets - This function is called by the OS to send packets
+ * @skb: the packet(s) to send
+ * @netdev:device on which to TX the above packet(s)
+ *
+ * Return 0 in almost all cases; non-zero value in extreme hard failure only
+ */
+int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
+{
+	int status = 0;
+	struct et131x_adapter *pAdapter = NULL;
+
+	DBG_TX_ENTER(et131x_dbginfo);
+
+	pAdapter = netdev_priv(netdev);
+
+	/* Send these packets
+	 *
+	 * NOTE: The Linux Tx entry point is only given one packet at a time
+	 * to Tx, so the PacketCount and it's array used makes no sense here
+	 */
+
+	/* Queue is not empty or TCB is not available */
+	if (!list_empty(&pAdapter->TxRing.SendWaitQueue) ||
+	    MP_TCB_RESOURCES_NOT_AVAILABLE(pAdapter)) {
+		/* NOTE: If there's an error on send, no need to queue the
+		 * packet under Linux; if we just send an error up to the
+		 * netif layer, it will resend the skb to us.
+		 */
+		DBG_VERBOSE(et131x_dbginfo, "TCB Resources Not Available\n");
+		status = -ENOMEM;
+	} else {
+		/* We need to see if the link is up; if it's not, make the
+		 * netif layer think we're good and drop the packet
+		 */
+		//if( MP_SHOULD_FAIL_SEND( pAdapter ) || pAdapter->DriverNoPhyAccess )
+		if (MP_SHOULD_FAIL_SEND(pAdapter) || pAdapter->DriverNoPhyAccess
+		    || !netif_carrier_ok(netdev)) {
+			DBG_VERBOSE(et131x_dbginfo,
+				    "Can't Tx, Link is DOWN; drop the packet\n");
+
+			dev_kfree_skb_any(skb);
+			skb = NULL;
+
+			pAdapter->net_stats.tx_dropped++;
+		} else {
+			status = et131x_send_packet(skb, pAdapter);
+
+			if (status == -ENOMEM) {
+
+				/* NOTE: If there's an error on send, no need
+				 * to queue the packet under Linux; if we just
+				 * send an error up to the netif layer, it
+				 * will resend the skb to us.
+				 */
+				DBG_WARNING(et131x_dbginfo,
+					    "Resources problem, Queue tx packet\n");
+			} else if (status != 0) {
+				/* On any other error, make netif think we're
+				 * OK and drop the packet
+				 */
+				DBG_WARNING(et131x_dbginfo,
+					    "General error, drop packet\n");
+
+				dev_kfree_skb_any(skb);
+				skb = NULL;
+
+				pAdapter->net_stats.tx_dropped++;
+			}
+		}
+	}
+
+	DBG_TX_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_send_packet - Do the work to send a packet
+ * @skb: the packet(s) to send
+ * @pAdapter: a pointer to the device's private adapter structure
+ *
+ * Return 0 in almost all cases; non-zero value in extreme hard failure only.
+ *
+ * Assumption: Send spinlock has been acquired
+ */
+static int et131x_send_packet(struct sk_buff *skb,
+			      struct et131x_adapter *pAdapter)
+{
+	int status = 0;
+	PMP_TCB pMpTcb = NULL;
+	uint16_t *pShBufVa;
+	unsigned long lockflags;
+
+	DBG_TX_ENTER(et131x_dbginfo);
+
+	/* Is our buffer scattered, or continuous? */
+	if (skb_shinfo(skb)->nr_frags == 0) {
+		DBG_TX(et131x_dbginfo, "Scattered buffer: NO\n");
+	} else {
+		DBG_TX(et131x_dbginfo, "Scattered buffer: YES, Num Frags: %d\n",
+		       skb_shinfo(skb)->nr_frags);
+	}
+
+	/* All packets must have at least a MAC address and a protocol type */
+	if (skb->len < ETH_HLEN) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Packet size < ETH_HLEN (14 bytes)\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	/* Get a TCB for this packet */
+	spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags);
+
+	pMpTcb = pAdapter->TxRing.TCBReadyQueueHead;
+
+	if (pMpTcb == NULL) {
+		spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+		DBG_WARNING(et131x_dbginfo, "Can't obtain a TCB\n");
+		DBG_TX_LEAVE(et131x_dbginfo);
+		return -ENOMEM;
+	}
+
+	pAdapter->TxRing.TCBReadyQueueHead = pMpTcb->Next;
+
+	if (pAdapter->TxRing.TCBReadyQueueHead == NULL) {
+		pAdapter->TxRing.TCBReadyQueueTail = NULL;
+	}
+
+	spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+	pMpTcb->PacketLength = skb->len;
+	pMpTcb->Packet = skb;
+
+	if ((skb->data != NULL) && ((skb->len - skb->data_len) >= 6)) {
+		pShBufVa = (uint16_t *) skb->data;
+
+		if ((pShBufVa[0] == 0xffff) &&
+		    (pShBufVa[1] == 0xffff) && (pShBufVa[2] == 0xffff)) {
+			MP_SET_FLAG(pMpTcb, fMP_DEST_BROAD);
+		} else if ((pShBufVa[0] & 0x3) == 0x0001) {
+			MP_SET_FLAG(pMpTcb, fMP_DEST_MULTI);
+		}
+	}
+
+	pMpTcb->Next = NULL;
+
+	/* Call the NIC specific send handler. */
+	if (status == 0) {
+		status = nic_send_packet(pAdapter, pMpTcb);
+	}
+
+	if (status != 0) {
+		spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags);
+
+		if (pAdapter->TxRing.TCBReadyQueueTail) {
+			pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb;
+		} else {
+			/* Apparently ready Q is empty. */
+			pAdapter->TxRing.TCBReadyQueueHead = pMpTcb;
+		}
+
+		pAdapter->TxRing.TCBReadyQueueTail = pMpTcb;
+
+		spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+		DBG_TX_LEAVE(et131x_dbginfo);
+		return status;
+	}
+
+	DBG_ASSERT(pAdapter->TxRing.nBusySend <= NUM_TCB);
+
+	DBG_TX_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+/**
+ * nic_send_packet - NIC specific send handler for version B silicon.
+ * @pAdapter: pointer to our adapter
+ * @pMpTcb: pointer to MP_TCB
+ *
+ * Returns 0 or errno.
+ */
+static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb)
+{
+	uint32_t loopIndex;
+	TX_DESC_ENTRY_t CurDesc[24];
+	uint32_t FragmentNumber = 0;
+	uint32_t iThisCopy, iRemainder;
+	struct sk_buff *pPacket = pMpTcb->Packet;
+	uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1;
+	struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0];
+	unsigned long lockflags1, lockflags2;
+
+	DBG_TX_ENTER(et131x_dbginfo);
+
+	/* Part of the optimizations of this send routine restrict us to
+	 * sending 24 fragments at a pass.  In practice we should never see
+	 * more than 5 fragments.
+	 *
+	 * NOTE: The older version of this function (below) can handle any
+	 * number of fragments. If needed, we can call this function,
+	 * although it is less efficient.
+	 */
+	if (FragListCount > 23) {
+		DBG_TX_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	memset(CurDesc, 0, sizeof(TX_DESC_ENTRY_t) * (FragListCount + 1));
+
+	for (loopIndex = 0; loopIndex < FragListCount; loopIndex++) {
+		/* If there is something in this element, lets get a
+		 * descriptor from the ring and get the necessary data
+		 */
+		if (loopIndex == 0) {
+			/* If the fragments are smaller than a standard MTU,
+			 * then map them to a single descriptor in the Tx
+			 * Desc ring. However, if they're larger, as is
+			 * possible with support for jumbo packets, then
+			 * split them each across 2 descriptors.
+			 *
+			 * This will work until we determine why the hardware
+			 * doesn't seem to like large fragments.
+			 */
+			if ((pPacket->len - pPacket->data_len) <= 1514) {
+				DBG_TX(et131x_dbginfo,
+				       "Got packet of length %d, "
+				       "filling desc entry %d, "
+				       "TCB: 0x%p\n",
+				       (pPacket->len - pPacket->data_len),
+				       pAdapter->TxRing.txDmaReadyToSend.bits.
+				       val, pMpTcb);
+
+				CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+				CurDesc[FragmentNumber].word2.bits.
+				    length_in_bytes =
+				    pPacket->len - pPacket->data_len;
+
+				/* NOTE: Here, the dma_addr_t returned from
+				 * pci_map_single() is implicitly cast as a
+				 * uint32_t. Although dma_addr_t can be
+				 * 64-bit, the address returned by
+				 * pci_map_single() is always 32-bit
+				 * addressable (as defined by the pci/dma
+				 * subsystem)
+				 */
+				CurDesc[FragmentNumber++].DataBufferPtrLow =
+				    pci_map_single(pAdapter->pdev,
+						   pPacket->data,
+						   pPacket->len -
+						   pPacket->data_len,
+						   PCI_DMA_TODEVICE);
+			} else {
+				DBG_TX(et131x_dbginfo,
+				       "Got packet of length %d, "
+				       "filling desc entry %d, "
+				       "TCB: 0x%p\n",
+				       (pPacket->len - pPacket->data_len),
+				       pAdapter->TxRing.txDmaReadyToSend.bits.
+				       val, pMpTcb);
+
+				CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+				CurDesc[FragmentNumber].word2.bits.
+				    length_in_bytes =
+				    ((pPacket->len - pPacket->data_len) / 2);
+
+				/* NOTE: Here, the dma_addr_t returned from
+				 * pci_map_single() is implicitly cast as a
+				 * uint32_t. Although dma_addr_t can be
+				 * 64-bit, the address returned by
+				 * pci_map_single() is always 32-bit
+				 * addressable (as defined by the pci/dma
+				 * subsystem)
+				 */
+				CurDesc[FragmentNumber++].DataBufferPtrLow =
+				    pci_map_single(pAdapter->pdev,
+						   pPacket->data,
+						   ((pPacket->len -
+						     pPacket->data_len) / 2),
+						   PCI_DMA_TODEVICE);
+				CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+				CurDesc[FragmentNumber].word2.bits.
+				    length_in_bytes =
+				    ((pPacket->len - pPacket->data_len) / 2);
+
+				/* NOTE: Here, the dma_addr_t returned from
+				 * pci_map_single() is implicitly cast as a
+				 * uint32_t. Although dma_addr_t can be
+				 * 64-bit, the address returned by
+				 * pci_map_single() is always 32-bit
+				 * addressable (as defined by the pci/dma
+				 * subsystem)
+				 */
+				CurDesc[FragmentNumber++].DataBufferPtrLow =
+				    pci_map_single(pAdapter->pdev,
+						   pPacket->data +
+						   ((pPacket->len -
+						     pPacket->data_len) / 2),
+						   ((pPacket->len -
+						     pPacket->data_len) / 2),
+						   PCI_DMA_TODEVICE);
+			}
+		} else {
+			DBG_TX(et131x_dbginfo,
+			       "Got packet of length %d,"
+			       "filling desc entry %d\n"
+			       "TCB: 0x%p\n",
+			       pFragList[loopIndex].size,
+			       pAdapter->TxRing.txDmaReadyToSend.bits.val,
+			       pMpTcb);
+
+			CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+			CurDesc[FragmentNumber].word2.bits.length_in_bytes =
+			    pFragList[loopIndex - 1].size;
+
+			/* NOTE: Here, the dma_addr_t returned from
+			 * pci_map_page() is implicitly cast as a uint32_t.
+			 * Although dma_addr_t can be 64-bit, the address
+			 * returned by pci_map_page() is always 32-bit
+			 * addressable (as defined by the pci/dma subsystem)
+			 */
+			CurDesc[FragmentNumber++].DataBufferPtrLow =
+			    pci_map_page(pAdapter->pdev,
+					 pFragList[loopIndex - 1].page,
+					 pFragList[loopIndex - 1].page_offset,
+					 pFragList[loopIndex - 1].size,
+					 PCI_DMA_TODEVICE);
+		}
+	}
+
+	if (FragmentNumber == 0) {
+		DBG_WARNING(et131x_dbginfo, "No. frags is 0\n");
+		return -EIO;
+	}
+
+	if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+		if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt ==
+		    pAdapter->RegistryTxNumBuffers) {
+			CurDesc[FragmentNumber - 1].word3.value = 0x5;
+			pAdapter->TxRing.TxPacketsSinceLastinterrupt = 0;
+		} else {
+			CurDesc[FragmentNumber - 1].word3.value = 0x1;
+		}
+	} else {
+		CurDesc[FragmentNumber - 1].word3.value = 0x5;
+	}
+
+	CurDesc[0].word3.bits.f = 1;
+
+	pMpTcb->WrIndexStart = pAdapter->TxRing.txDmaReadyToSend;
+	pMpTcb->PacketStaleCount = 0;
+
+	spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1);
+
+	iThisCopy =
+	    NUM_DESC_PER_RING_TX - pAdapter->TxRing.txDmaReadyToSend.bits.val;
+
+	if (iThisCopy >= FragmentNumber) {
+		iRemainder = 0;
+		iThisCopy = FragmentNumber;
+	} else {
+		iRemainder = FragmentNumber - iThisCopy;
+	}
+
+	memcpy(pAdapter->TxRing.pTxDescRingVa +
+	       pAdapter->TxRing.txDmaReadyToSend.bits.val, CurDesc,
+	       sizeof(TX_DESC_ENTRY_t) * iThisCopy);
+
+	pAdapter->TxRing.txDmaReadyToSend.bits.val += iThisCopy;
+
+	if ((pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) ||
+	    (pAdapter->TxRing.txDmaReadyToSend.bits.val ==
+	     NUM_DESC_PER_RING_TX)) {
+		if (pAdapter->TxRing.txDmaReadyToSend.bits.wrap) {
+			pAdapter->TxRing.txDmaReadyToSend.value = 0;
+		} else {
+			pAdapter->TxRing.txDmaReadyToSend.value = 0x400;
+		}
+	}
+
+	if (iRemainder) {
+		memcpy(pAdapter->TxRing.pTxDescRingVa,
+		       CurDesc + iThisCopy,
+		       sizeof(TX_DESC_ENTRY_t) * iRemainder);
+
+		pAdapter->TxRing.txDmaReadyToSend.bits.val += iRemainder;
+	}
+
+	if (pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) {
+		if (pAdapter->TxRing.txDmaReadyToSend.value) {
+			pMpTcb->WrIndex.value = NUM_DESC_PER_RING_TX - 1;
+		} else {
+			pMpTcb->WrIndex.value =
+			    0x400 | (NUM_DESC_PER_RING_TX - 1);
+		}
+	} else {
+		pMpTcb->WrIndex.value =
+		    pAdapter->TxRing.txDmaReadyToSend.value - 1;
+	}
+
+	spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2);
+
+	if (pAdapter->TxRing.CurrSendTail) {
+		pAdapter->TxRing.CurrSendTail->Next = pMpTcb;
+	} else {
+		pAdapter->TxRing.CurrSendHead = pMpTcb;
+	}
+
+	pAdapter->TxRing.CurrSendTail = pMpTcb;
+
+	DBG_ASSERT(pMpTcb->Next == NULL);
+
+	pAdapter->TxRing.nBusySend++;
+
+	spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2);
+
+	/* Write the new write pointer back to the device. */
+	writel(pAdapter->TxRing.txDmaReadyToSend.value,
+	       &pAdapter->CSRAddress->txdma.service_request.value);
+
+	/* For Gig only, we use Tx Interrupt coalescing.  Enable the software
+	 * timer to wake us up if this packet isn't followed by N more.
+	 */
+	if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+		writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
+		       &pAdapter->CSRAddress->global.watchdog_timer);
+	}
+
+	spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1);
+
+	DBG_TX_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+/*
+ * NOTE: For now, keep this older version of NICSendPacket around for
+ * reference, even though it's not used
+ */
+#if 0
+
+/**
+ * NICSendPacket - NIC specific send handler.
+ * @pAdapter: pointer to our adapter
+ * @pMpTcb: pointer to MP_TCB
+ *
+ * Returns 0 on succes, errno on failure.
+ *
+ * This version of the send routine is designed for version A silicon.
+ * Assumption - Send spinlock has been acquired.
+ */
+static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb)
+{
+	uint32_t loopIndex, fragIndex, loopEnd;
+	uint32_t iSplitFirstElement = 0;
+	uint32_t SegmentSize = 0;
+	TX_DESC_ENTRY_t CurDesc;
+	TX_DESC_ENTRY_t *CurDescPostCopy = NULL;
+	uint32_t SlotsAvailable;
+	DMA10W_t ServiceComplete;
+	unsigned int lockflags1, lockflags2;
+	struct sk_buff *pPacket = pMpTcb->Packet;
+	uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1;
+	struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0];
+
+	DBG_TX_ENTER(et131x_dbginfo);
+
+	ServiceComplete.value =
+		readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value);
+
+	/*
+	 * Attempt to fix TWO hardware bugs:
+	 * 1)  NEVER write an odd number of descriptors.
+	 * 2)  If packet length is less than NIC_MIN_PACKET_SIZE, then pad the
+	 *     packet to NIC_MIN_PACKET_SIZE bytes by adding a new last
+	 *     descriptor IN HALF DUPLEX MODE ONLY
+	 * NOTE that (2) interacts with (1).  If the packet is less than
+	 * NIC_MIN_PACKET_SIZE bytes then we will append a descriptor.
+	 * Therefore if it is even now, it will eventually end up odd, and
+	 * so will need adjusting.
+	 *
+	 * VLAN tags get involved since VLAN tags add another one or two
+	 * segments.
+	 */
+	DBG_TX(et131x_dbginfo,
+	       "pMpTcb->PacketLength: %d\n", pMpTcb->PacketLength);
+
+	if ((pAdapter->uiDuplexMode == 0)
+	    && (pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE)) {
+		DBG_TX(et131x_dbginfo,
+		       "HALF DUPLEX mode AND len < MIN_PKT_SIZE\n");
+		if ((FragListCount & 0x1) == 0) {
+			DBG_TX(et131x_dbginfo,
+			       "Even number of descs, split 1st elem\n");
+			iSplitFirstElement = 1;
+			//SegmentSize = pFragList[0].size / 2;
+			SegmentSize = (pPacket->len - pPacket->data_len) / 2;
+		}
+	} else if (FragListCount & 0x1) {
+		DBG_TX(et131x_dbginfo, "Odd number of descs, split 1st elem\n");
+
+		iSplitFirstElement = 1;
+		//SegmentSize = pFragList[0].size / 2;
+		SegmentSize = (pPacket->len - pPacket->data_len) / 2;
+	}
+
+	spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1);
+
+	if (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req_wrap ==
+	    ServiceComplete.bits.serv_cpl_wrap) {
+		/* The ring hasn't wrapped.  Slots available should be
+		 * (RING_SIZE) -  the difference between the two pointers.
+		 */
+		SlotsAvailable = NUM_DESC_PER_RING_TX -
+		    (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req -
+		     ServiceComplete.bits.serv_cpl);
+	} else {
+		/* The ring has wrapped.  Slots available should be the
+		 * difference between the two pointers.
+		 */
+		SlotsAvailable = ServiceComplete.bits.serv_cpl -
+		    pAdapter->TxRing.txDmaReadyToSend.bits.serv_req;
+	}
+
+	if ((FragListCount + iSplitFirstElement) > SlotsAvailable) {
+		DBG_WARNING(et131x_dbginfo,
+			    "Not Enough Space in Tx Desc Ring\n");
+		spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1);
+		return -ENOMEM;
+	}
+
+	loopEnd = (FragListCount) + iSplitFirstElement;
+	fragIndex = 0;
+
+	DBG_TX(et131x_dbginfo,
+	       "TCB           : 0x%p\n"
+	       "Packet (SKB)  : 0x%p\t Packet->len: %d\t Packet->data_len: %d\n"
+	       "FragListCount : %d\t iSplitFirstElement: %d\t loopEnd:%d\n",
+	       pMpTcb,
+	       pPacket, pPacket->len, pPacket->data_len,
+	       FragListCount, iSplitFirstElement, loopEnd);
+
+	for (loopIndex = 0; loopIndex < loopEnd; loopIndex++) {
+		if (loopIndex > iSplitFirstElement) {
+			fragIndex++;
+		}
+
+		DBG_TX(et131x_dbginfo,
+		       "In loop, loopIndex: %d\t fragIndex: %d\n", loopIndex,
+		       fragIndex);
+
+		/* If there is something in this element, let's get a
+		 * descriptor from the ring and get the necessary data
+		 */
+		DBG_TX(et131x_dbginfo,
+		       "Packet Length %d,"
+		       "filling desc entry %d\n",
+		       pPacket->len,
+		       pAdapter->TxRing.txDmaReadyToSend.bits.serv_req);
+
+		// NOTE - Should we do a paranoia check here to make sure the fragment
+		// actually has a length? It's HIGHLY unlikely the fragment would
+		// contain no data...
+		if (1) {
+			// NOTE - Currently always getting 32-bit addrs, and dma_addr_t is
+			//        only 32-bit, so leave "high" ptr value out for now
+			CurDesc.DataBufferPtrHigh = 0;
+
+			CurDesc.word2.value = 0;
+			CurDesc.word3.value = 0;
+
+			if (fragIndex == 0) {
+				if (iSplitFirstElement) {
+					DBG_TX(et131x_dbginfo,
+					       "Split first element: YES\n");
+
+					if (loopIndex == 0) {
+						DBG_TX(et131x_dbginfo,
+						       "Got fragment of length %d, fragIndex: %d\n",
+						       pPacket->len -
+						       pPacket->data_len,
+						       fragIndex);
+						DBG_TX(et131x_dbginfo,
+						       "SegmentSize: %d\n",
+						       SegmentSize);
+
+						CurDesc.word2.bits.
+						    length_in_bytes =
+						    SegmentSize;
+						CurDesc.DataBufferPtrLow =
+						    pci_map_single(pAdapter->
+								   pdev,
+								   pPacket->
+								   data,
+								   SegmentSize,
+								   PCI_DMA_TODEVICE);
+						DBG_TX(et131x_dbginfo,
+						       "pci_map_single() returns: 0x%08x\n",
+						       CurDesc.
+						       DataBufferPtrLow);
+					} else {
+						DBG_TX(et131x_dbginfo,
+						       "Got fragment of length %d, fragIndex: %d\n",
+						       pPacket->len -
+						       pPacket->data_len,
+						       fragIndex);
+						DBG_TX(et131x_dbginfo,
+						       "Leftover Size: %d\n",
+						       (pPacket->len -
+							pPacket->data_len -
+							SegmentSize));
+
+						CurDesc.word2.bits.
+						    length_in_bytes =
+						    ((pPacket->len -
+						      pPacket->data_len) -
+						     SegmentSize);
+						CurDesc.DataBufferPtrLow =
+						    pci_map_single(pAdapter->
+								   pdev,
+								   (pPacket->
+								    data +
+								    SegmentSize),
+								   (pPacket->
+								    len -
+								    pPacket->
+								    data_len -
+								    SegmentSize),
+								   PCI_DMA_TODEVICE);
+						DBG_TX(et131x_dbginfo,
+						       "pci_map_single() returns: 0x%08x\n",
+						       CurDesc.
+						       DataBufferPtrLow);
+					}
+				} else {
+					DBG_TX(et131x_dbginfo,
+					       "Split first element: NO\n");
+
+					CurDesc.word2.bits.length_in_bytes =
+					    pPacket->len - pPacket->data_len;
+
+					CurDesc.DataBufferPtrLow =
+					    pci_map_single(pAdapter->pdev,
+							   pPacket->data,
+							   (pPacket->len -
+							    pPacket->data_len),
+							   PCI_DMA_TODEVICE);
+					DBG_TX(et131x_dbginfo,
+					       "pci_map_single() returns: 0x%08x\n",
+					       CurDesc.DataBufferPtrLow);
+				}
+			} else {
+
+				CurDesc.word2.bits.length_in_bytes =
+				    pFragList[fragIndex - 1].size;
+				CurDesc.DataBufferPtrLow =
+				    pci_map_page(pAdapter->pdev,
+						 pFragList[fragIndex - 1].page,
+						 pFragList[fragIndex -
+							   1].page_offset,
+						 pFragList[fragIndex - 1].size,
+						 PCI_DMA_TODEVICE);
+				DBG_TX(et131x_dbginfo,
+				       "pci_map_page() returns: 0x%08x\n",
+				       CurDesc.DataBufferPtrLow);
+			}
+
+			if (loopIndex == 0) {
+				/* This is the first descriptor of the packet
+				 *
+				 * Set the "f" bit to indicate this is the
+				 * first descriptor in the packet.
+				 */
+				DBG_TX(et131x_dbginfo,
+				       "This is our FIRST descriptor\n");
+				CurDesc.word3.bits.f = 1;
+
+				pMpTcb->WrIndexStart =
+				    pAdapter->TxRing.txDmaReadyToSend;
+			}
+
+			if ((loopIndex == (loopEnd - 1)) &&
+			    (pAdapter->uiDuplexMode ||
+			     (pMpTcb->PacketLength >= NIC_MIN_PACKET_SIZE))) {
+				/* This is the Last descriptor of the packet */
+				DBG_TX(et131x_dbginfo,
+				       "THIS is our LAST descriptor\n");
+
+				if (pAdapter->uiLinkSpeed ==
+				    TRUEPHY_SPEED_1000MBPS) {
+					if (++pAdapter->TxRing.
+					    TxPacketsSinceLastinterrupt >=
+					    pAdapter->RegistryTxNumBuffers) {
+						CurDesc.word3.value = 0x5;
+						pAdapter->TxRing.
+						    TxPacketsSinceLastinterrupt
+						    = 0;
+					} else {
+						CurDesc.word3.value = 0x1;
+					}
+				} else {
+					CurDesc.word3.value = 0x5;
+				}
+
+				/* Following index will be used during freeing
+				 * of packet
+				 */
+				pMpTcb->WrIndex =
+				    pAdapter->TxRing.txDmaReadyToSend;
+				pMpTcb->PacketStaleCount = 0;
+			}
+
+			/* Copy the descriptor (filled above) into the
+			 * descriptor ring at the next free entry.  Advance
+			 * the "next free entry" variable
+			 */
+			memcpy(pAdapter->TxRing.pTxDescRingVa +
+			       pAdapter->TxRing.txDmaReadyToSend.bits.serv_req,
+			       &CurDesc, sizeof(TX_DESC_ENTRY_t));
+
+			CurDescPostCopy =
+			    pAdapter->TxRing.pTxDescRingVa +
+			    pAdapter->TxRing.txDmaReadyToSend.bits.serv_req;
+
+			DBG_TX(et131x_dbginfo,
+			       "CURRENT DESCRIPTOR\n"
+			       "\tAddress           : 0x%p\n"
+			       "\tDataBufferPtrHigh : 0x%08x\n"
+			       "\tDataBufferPtrLow  : 0x%08x\n"
+			       "\tword2             : 0x%08x\n"
+			       "\tword3             : 0x%08x\n",
+			       CurDescPostCopy,
+			       CurDescPostCopy->DataBufferPtrHigh,
+			       CurDescPostCopy->DataBufferPtrLow,
+			       CurDescPostCopy->word2.value,
+			       CurDescPostCopy->word3.value);
+
+			if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >=
+			    NUM_DESC_PER_RING_TX) {
+				if (pAdapter->TxRing.txDmaReadyToSend.bits.
+				    serv_req_wrap) {
+					pAdapter->TxRing.txDmaReadyToSend.
+					    value = 0;
+				} else {
+					pAdapter->TxRing.txDmaReadyToSend.
+					    value = 0x400;
+				}
+			}
+		}
+	}
+
+	if (pAdapter->uiDuplexMode == 0 &&
+	    pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE) {
+		// NOTE - Same 32/64-bit issue as above...
+		CurDesc.DataBufferPtrHigh = 0x0;
+		CurDesc.DataBufferPtrLow = pAdapter->TxRing.pTxDummyBlkPa;
+		CurDesc.word2.value = 0;
+
+		if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+			if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt >=
+			    pAdapter->RegistryTxNumBuffers) {
+				CurDesc.word3.value = 0x5;
+				pAdapter->TxRing.TxPacketsSinceLastinterrupt =
+				    0;
+			} else {
+				CurDesc.word3.value = 0x1;
+			}
+		} else {
+			CurDesc.word3.value = 0x5;
+		}
+
+		CurDesc.word2.bits.length_in_bytes =
+		    NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength;
+
+		pMpTcb->WrIndex = pAdapter->TxRing.txDmaReadyToSend;
+
+		memcpy(pAdapter->TxRing.pTxDescRingVa +
+		       pAdapter->TxRing.txDmaReadyToSend.bits.serv_req,
+		       &CurDesc, sizeof(TX_DESC_ENTRY_t));
+
+		CurDescPostCopy =
+		    pAdapter->TxRing.pTxDescRingVa +
+		    pAdapter->TxRing.txDmaReadyToSend.bits.serv_req;
+
+		DBG_TX(et131x_dbginfo,
+		       "CURRENT DESCRIPTOR\n"
+		       "\tAddress           : 0x%p\n"
+		       "\tDataBufferPtrHigh : 0x%08x\n"
+		       "\tDataBufferPtrLow  : 0x%08x\n"
+		       "\tword2             : 0x%08x\n"
+		       "\tword3             : 0x%08x\n",
+		       CurDescPostCopy,
+		       CurDescPostCopy->DataBufferPtrHigh,
+		       CurDescPostCopy->DataBufferPtrLow,
+		       CurDescPostCopy->word2.value,
+		       CurDescPostCopy->word3.value);
+
+		if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >=
+		    NUM_DESC_PER_RING_TX) {
+			if (pAdapter->TxRing.txDmaReadyToSend.bits.
+			    serv_req_wrap) {
+				pAdapter->TxRing.txDmaReadyToSend.value = 0;
+			} else {
+				pAdapter->TxRing.txDmaReadyToSend.value = 0x400;
+			}
+		}
+
+		DBG_TX(et131x_dbginfo, "Padding descriptor %d by %d bytes\n",
+		       //pAdapter->TxRing.txDmaReadyToSend.value,
+		       pAdapter->TxRing.txDmaReadyToSend.bits.serv_req,
+		       NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength);
+	}
+
+	spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2);
+
+	if (pAdapter->TxRing.CurrSendTail) {
+		pAdapter->TxRing.CurrSendTail->Next = pMpTcb;
+	} else {
+		pAdapter->TxRing.CurrSendHead = pMpTcb;
+	}
+
+	pAdapter->TxRing.CurrSendTail = pMpTcb;
+
+	DBG_ASSERT(pMpTcb->Next == NULL);
+
+	pAdapter->TxRing.nBusySend++;
+
+	spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2);
+
+	/* Write the new write pointer back to the device. */
+	writel(pAdapter->TxRing.txDmaReadyToSend.value,
+	       &pAdapter->CSRAddress->txdma.service_request.value);
+
+#ifdef CONFIG_ET131X_DEBUG
+	DumpDeviceBlock(DBG_TX_ON, pAdapter, 1);
+#endif
+
+	/* For Gig only, we use Tx Interrupt coalescing.  Enable the software
+	 * timer to wake us up if this packet isn't followed by N more.
+	 */
+	if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+		writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
+		       &pAdapter->CSRAddress->global.watchdog_timer);
+	}
+
+	spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1);
+
+	DBG_TX_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+#endif
+
+/**
+ * et131x_free_send_packet - Recycle a MP_TCB, complete the packet if necessary
+ * @pAdapter: pointer to our adapter
+ * @pMpTcb: pointer to MP_TCB
+ *
+ * Assumption - Send spinlock has been acquired
+ */
+__inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb)
+{
+	unsigned long lockflags;
+	TX_DESC_ENTRY_t *desc = NULL;
+	struct net_device_stats *stats = &pAdapter->net_stats;
+
+	if (MP_TEST_FLAG(pMpTcb, fMP_DEST_BROAD)) {
+		atomic_inc(&pAdapter->Stats.brdcstxmt);
+	} else if (MP_TEST_FLAG(pMpTcb, fMP_DEST_MULTI)) {
+		atomic_inc(&pAdapter->Stats.multixmt);
+	} else {
+		atomic_inc(&pAdapter->Stats.unixmt);
+	}
+
+	if (pMpTcb->Packet) {
+		stats->tx_bytes += pMpTcb->Packet->len;
+
+		/* Iterate through the TX descriptors on the ring
+		 * corresponding to this packet and umap the fragments
+		 * they point to
+		 */
+		DBG_TX(et131x_dbginfo,
+		       "Unmap descriptors Here\n"
+		       "TCB                  : 0x%p\n"
+		       "TCB Next             : 0x%p\n"
+		       "TCB PacketLength     : %d\n"
+		       "TCB WrIndex.value    : 0x%08x\n"
+		       "TCB WrIndex.bits.val : %d\n"
+		       "TCB WrIndex.value    : 0x%08x\n"
+		       "TCB WrIndex.bits.val : %d\n",
+		       pMpTcb,
+		       pMpTcb->Next,
+		       pMpTcb->PacketLength,
+		       pMpTcb->WrIndexStart.value,
+		       pMpTcb->WrIndexStart.bits.val,
+		       pMpTcb->WrIndex.value,
+		       pMpTcb->WrIndex.bits.val);
+
+		do {
+			desc =
+			    (TX_DESC_ENTRY_t *) (pAdapter->TxRing.
+						 pTxDescRingVa +
+						 pMpTcb->WrIndexStart.bits.val);
+
+			DBG_TX(et131x_dbginfo,
+			       "CURRENT DESCRIPTOR\n"
+			       "\tAddress           : 0x%p\n"
+			       "\tDataBufferPtrHigh : 0x%08x\n"
+			       "\tDataBufferPtrLow  : 0x%08x\n"
+			       "\tword2             : 0x%08x\n"
+			       "\tword3             : 0x%08x\n",
+			       desc,
+			       desc->DataBufferPtrHigh,
+			       desc->DataBufferPtrLow,
+			       desc->word2.value,
+			       desc->word3.value);
+
+			pci_unmap_single(pAdapter->pdev,
+					 desc->DataBufferPtrLow,
+					 desc->word2.value, PCI_DMA_TODEVICE);
+
+			if (++pMpTcb->WrIndexStart.bits.val >=
+			    NUM_DESC_PER_RING_TX) {
+				if (pMpTcb->WrIndexStart.bits.wrap) {
+					pMpTcb->WrIndexStart.value = 0;
+				} else {
+					pMpTcb->WrIndexStart.value = 0x400;
+				}
+			}
+		}
+		while (desc != (pAdapter->TxRing.pTxDescRingVa +
+				pMpTcb->WrIndex.bits.val));
+
+		DBG_TX(et131x_dbginfo,
+		       "Free Packet (SKB)   : 0x%p\n", pMpTcb->Packet);
+
+		dev_kfree_skb_any(pMpTcb->Packet);
+	}
+
+	memset(pMpTcb, 0, sizeof(MP_TCB));
+
+	/* Add the TCB to the Ready Q */
+	spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags);
+
+	pAdapter->Stats.opackets++;
+
+	if (pAdapter->TxRing.TCBReadyQueueTail) {
+		pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb;
+	} else {
+		/* Apparently ready Q is empty. */
+		pAdapter->TxRing.TCBReadyQueueHead = pMpTcb;
+	}
+
+	pAdapter->TxRing.TCBReadyQueueTail = pMpTcb;
+
+	spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+	DBG_ASSERT(pAdapter->TxRing.nBusySend >= 0);
+}
+
+/**
+ * et131x_free_busy_send_packets - Free and complete the stopped active sends
+ * @pAdapter: pointer to our adapter
+ *
+ * Assumption - Send spinlock has been acquired
+ */
+void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter)
+{
+	PMP_TCB pMpTcb;
+	struct list_head *pEntry;
+	struct sk_buff *pPacket = NULL;
+	unsigned long lockflags;
+	uint32_t FreeCounter = 0;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	while (!list_empty(&pAdapter->TxRing.SendWaitQueue)) {
+		spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags);
+
+		pAdapter->TxRing.nWaitSend--;
+		spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags);
+
+		pEntry = pAdapter->TxRing.SendWaitQueue.next;
+
+		pPacket = NULL;
+	}
+
+	pAdapter->TxRing.nWaitSend = 0;
+
+	/* Any packets being sent? Check the first TCB on the send list */
+	spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+	pMpTcb = pAdapter->TxRing.CurrSendHead;
+
+	while ((pMpTcb != NULL) && (FreeCounter < NUM_TCB)) {
+		PMP_TCB pNext = pMpTcb->Next;
+
+		pAdapter->TxRing.CurrSendHead = pNext;
+
+		if (pNext == NULL) {
+			pAdapter->TxRing.CurrSendTail = NULL;
+		}
+
+		pAdapter->TxRing.nBusySend--;
+
+		spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+
+		DBG_VERBOSE(et131x_dbginfo, "pMpTcb = 0x%p\n", pMpTcb);
+
+		FreeCounter++;
+		MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb);
+
+		spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+		pMpTcb = pAdapter->TxRing.CurrSendHead;
+	}
+
+	if (FreeCounter == NUM_TCB) {
+		DBG_ERROR(et131x_dbginfo,
+			  "MpFreeBusySendPackets exitted loop for a bad reason\n");
+		BUG();
+	}
+
+	spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+
+	pAdapter->TxRing.nBusySend = 0;
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_handle_send_interrupt - Interrupt handler for sending processing
+ * @pAdapter: pointer to our adapter
+ *
+ * Re-claim the send resources, complete sends and get more to send from
+ * the send wait queue.
+ *
+ * Assumption - Send spinlock has been acquired
+ */
+void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter)
+{
+	DBG_TX_ENTER(et131x_dbginfo);
+
+	/* Mark as completed any packets which have been sent by the device. */
+	et131x_update_tcb_list(pAdapter);
+
+	/* If we queued any transmits because we didn't have any TCBs earlier,
+	 * dequeue and send those packets now, as long as we have free TCBs.
+	 */
+	et131x_check_send_wait_list(pAdapter);
+
+	DBG_TX_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_update_tcb_list - Helper routine for Send Interrupt handler
+ * @pAdapter: pointer to our adapter
+ *
+ * Re-claims the send resources and completes sends.  Can also be called as
+ * part of the NIC send routine when the "ServiceComplete" indication has
+ * wrapped.
+ */
+static void et131x_update_tcb_list(struct et131x_adapter *pAdapter)
+{
+	unsigned long lockflags;
+	DMA10W_t ServiceComplete;
+	PMP_TCB pMpTcb;
+
+	ServiceComplete.value =
+	    readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value);
+
+	/* Has the ring wrapped?  Process any descriptors that do not have
+	 * the same "wrap" indicator as the current completion indicator
+	 */
+	spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+	pMpTcb = pAdapter->TxRing.CurrSendHead;
+	while (pMpTcb &&
+	       ServiceComplete.bits.wrap != pMpTcb->WrIndex.bits.wrap  &&
+	       ServiceComplete.bits.val < pMpTcb->WrIndex.bits.val) {
+		pAdapter->TxRing.nBusySend--;
+		pAdapter->TxRing.CurrSendHead = pMpTcb->Next;
+		if (pMpTcb->Next == NULL) {
+			pAdapter->TxRing.CurrSendTail = NULL;
+		}
+
+		spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+		MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb);
+		spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+		/* Goto the next packet */
+		pMpTcb = pAdapter->TxRing.CurrSendHead;
+	}
+	while (pMpTcb &&
+	       ServiceComplete.bits.wrap == pMpTcb->WrIndex.bits.wrap &&
+	       ServiceComplete.bits.val > pMpTcb->WrIndex.bits.val) {
+		pAdapter->TxRing.nBusySend--;
+		pAdapter->TxRing.CurrSendHead = pMpTcb->Next;
+		if (pMpTcb->Next == NULL) {
+			pAdapter->TxRing.CurrSendTail = NULL;
+		}
+
+		spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+		MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb);
+		spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+		/* Goto the next packet */
+		pMpTcb = pAdapter->TxRing.CurrSendHead;
+	}
+
+	/* Wake up the queue when we hit a low-water mark */
+	if (pAdapter->TxRing.nBusySend <= (NUM_TCB / 3)) {
+		netif_wake_queue(pAdapter->netdev);
+	}
+
+	spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+}
+
+/**
+ * et131x_check_send_wait_list - Helper routine for the interrupt handler
+ * @pAdapter: pointer to our adapter
+ *
+ * Takes packets from the send wait queue and posts them to the device (if
+ * room available).
+ */
+static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter)
+{
+	unsigned long lockflags;
+
+	spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags);
+
+	while (!list_empty(&pAdapter->TxRing.SendWaitQueue) &&
+	       MP_TCB_RESOURCES_AVAILABLE(pAdapter)) {
+		struct list_head *pEntry;
+
+		DBG_VERBOSE(et131x_dbginfo, "Tx packets on the wait queue\n");
+
+		pEntry = pAdapter->TxRing.SendWaitQueue.next;
+
+		pAdapter->TxRing.nWaitSend--;
+
+		DBG_WARNING(et131x_dbginfo,
+			    "MpHandleSendInterrupt - sent a queued pkt. Waiting %d\n",
+			    pAdapter->TxRing.nWaitSend);
+	}
+
+	spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags);
+}

drivers/staging/et131x/et1310_tx.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_tx.h - Defines, structs, enums, prototypes, etc. pertaining to data
+ *               transmission.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_TX_H__
+#define __ET1310_TX_H__
+
+
+/* Typedefs for Tx Descriptor Ring */
+
+/*
+ * TXDESC_WORD2_t structure holds part of the control bits in the Tx Descriptor
+ * ring for the ET-1310
+ */
+typedef union _txdesc_word2_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 vlan_prio:3;		// bits 29-31(VLAN priority)
+		u32 vlan_cfi:1;		// bit 28(cfi)
+		u32 vlan_tag:12;		// bits 16-27(VLAN tag)
+		u32 length_in_bytes:16;	// bits  0-15(packet length)
+#else
+		u32 length_in_bytes:16;	// bits  0-15(packet length)
+		u32 vlan_tag:12;		// bits 16-27(VLAN tag)
+		u32 vlan_cfi:1;		// bit 28(cfi)
+		u32 vlan_prio:3;		// bits 29-31(VLAN priority)
+#endif	/* _BIT_FIELDS_HTOL */
+	} bits;
+} TXDESC_WORD2_t, *PTXDESC_WORD2_t;
+
+/*
+ * TXDESC_WORD3_t structure holds part of the control bits in the Tx Descriptor
+ * ring for the ET-1310
+ */
+typedef union _txdesc_word3_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:17;	// bits 15-31
+		u32 udpa:1;	// bit 14(UDP checksum assist)
+		u32 tcpa:1;	// bit 13(TCP checksum assist)
+		u32 ipa:1;		// bit 12(IP checksum assist)
+		u32 vlan:1;	// bit 11(append VLAN tag)
+		u32 hp:1;		// bit 10(Packet is a Huge packet)
+		u32 pp:1;		// bit  9(pad packet)
+		u32 mac:1;		// bit  8(MAC override)
+		u32 crc:1;		// bit  7(append CRC)
+		u32 e:1;		// bit  6(Tx frame has error)
+		u32 pf:1;		// bit  5(send pause frame)
+		u32 bp:1;		// bit  4(Issue half-duplex backpressure (XON/XOFF)
+		u32 cw:1;		// bit  3(Control word - no packet data)
+		u32 ir:1;		// bit  2(interrupt the processor when this pkt sent)
+		u32 f:1;		// bit  1(first packet in the sequence)
+		u32 l:1;		// bit  0(last packet in the sequence)
+#else
+		u32 l:1;		// bit  0(last packet in the sequence)
+		u32 f:1;		// bit  1(first packet in the sequence)
+		u32 ir:1;		// bit  2(interrupt the processor when this pkt sent)
+		u32 cw:1;		// bit  3(Control word - no packet data)
+		u32 bp:1;		// bit  4(Issue half-duplex backpressure (XON/XOFF)
+		u32 pf:1;		// bit  5(send pause frame)
+		u32 e:1;		// bit  6(Tx frame has error)
+		u32 crc:1;		// bit  7(append CRC)
+		u32 mac:1;		// bit  8(MAC override)
+		u32 pp:1;		// bit  9(pad packet)
+		u32 hp:1;		// bit 10(Packet is a Huge packet)
+		u32 vlan:1;	// bit 11(append VLAN tag)
+		u32 ipa:1;		// bit 12(IP checksum assist)
+		u32 tcpa:1;	// bit 13(TCP checksum assist)
+		u32 udpa:1;	// bit 14(UDP checksum assist)
+		u32 unused:17;	// bits 15-31
+#endif	/* _BIT_FIELDS_HTOL */
+	} bits;
+} TXDESC_WORD3_t, *PTXDESC_WORD3_t;
+
+/* TX_DESC_ENTRY_t is sructure representing each descriptor on the ring */
+typedef struct _tx_desc_entry_t {
+	u32 DataBufferPtrHigh;
+	u32 DataBufferPtrLow;
+	TXDESC_WORD2_t word2;	// control words how to xmit the
+	TXDESC_WORD3_t word3;	// data (detailed above)
+} TX_DESC_ENTRY_t, *PTX_DESC_ENTRY_t;
+
+
+/* Typedefs for Tx DMA engine status writeback */
+
+/*
+ * TX_STATUS_BLOCK_t is sructure representing the status of the Tx DMA engine
+ * it sits in free memory, and is pointed to by 0x101c / 0x1020
+ */
+typedef union _tx_status_block_t {
+	u32 value;
+	struct {
+#ifdef _BIT_FIELDS_HTOL
+		u32 unused:21;		// bits 11-31
+		u32 serv_cpl_wrap:1;	// bit 10
+		u32 serv_cpl:10;		// bits 0-9
+#else
+		u32 serv_cpl:10;		// bits 0-9
+		u32 serv_cpl_wrap:1;	// bit 10
+		u32 unused:21;		// bits 11-31
+#endif
+	} bits;
+} TX_STATUS_BLOCK_t, *PTX_STATUS_BLOCK_t;
+
+/* TCB (Transmit Control Block) */
+typedef struct _MP_TCB {
+	struct _MP_TCB *Next;
+	u32 Flags;
+	u32 Count;
+	u32 PacketStaleCount;
+	struct sk_buff *Packet;
+	u32 PacketLength;
+	DMA10W_t WrIndex;
+	DMA10W_t WrIndexStart;
+} MP_TCB, *PMP_TCB;
+
+/* Structure to hold the skb's in a list */
+typedef struct tx_skb_list_elem {
+	struct list_head skb_list_elem;
+	struct sk_buff *skb;
+} TX_SKB_LIST_ELEM, *PTX_SKB_LIST_ELEM;
+
+/* TX_RING_t is sructure representing our local reference(s) to the ring */
+typedef struct _tx_ring_t {
+	/* TCB (Transmit Control Block) memory and lists */
+	PMP_TCB MpTcbMem;
+
+	/* List of TCBs that are ready to be used */
+	PMP_TCB TCBReadyQueueHead;
+	PMP_TCB TCBReadyQueueTail;
+
+	/* list of TCBs that are currently being sent.  NOTE that access to all
+	 * three of these (including nBusySend) are controlled via the
+	 * TCBSendQLock.  This lock should be secured prior to incementing /
+	 * decrementing nBusySend, or any queue manipulation on CurrSendHead /
+	 * Tail
+	 */
+	PMP_TCB CurrSendHead;
+	PMP_TCB CurrSendTail;
+	int32_t nBusySend;
+
+	/* List of packets (not TCBs) that were queued for lack of resources */
+	struct list_head SendWaitQueue;
+	int32_t nWaitSend;
+
+	/* The actual descriptor ring */
+	PTX_DESC_ENTRY_t pTxDescRingVa;
+	dma_addr_t pTxDescRingPa;
+	uint64_t pTxDescRingAdjustedPa;
+	uint64_t TxDescOffset;
+
+	/* ReadyToSend indicates where we last wrote to in the descriptor ring. */
+	DMA10W_t txDmaReadyToSend;
+
+	/* The location of the write-back status block */
+	PTX_STATUS_BLOCK_t pTxStatusVa;
+	dma_addr_t pTxStatusPa;
+
+	/* A Block of zeroes used to pad packets that are less than 60 bytes */
+	void *pTxDummyBlkVa;
+	dma_addr_t pTxDummyBlkPa;
+
+	TXMAC_ERR_t TxMacErr;
+
+	/* Variables to track the Tx interrupt coalescing features */
+	int32_t TxPacketsSinceLastinterrupt;
+} TX_RING_t, *PTX_RING_t;
+
+/* Forward declaration of the frag-list for the following prototypes */
+typedef struct _MP_FRAG_LIST MP_FRAG_LIST, *PMP_FRAG_LIST;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+/* PROTOTYPES for et1310_tx.c */
+int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter);
+void et131x_tx_dma_memory_free(struct et131x_adapter *adapter);
+void ConfigTxDmaRegs(struct et131x_adapter *pAdapter);
+void et131x_init_send(struct et131x_adapter *adapter);
+void et131x_tx_dma_disable(struct et131x_adapter *pAdapter);
+void et131x_tx_dma_enable(struct et131x_adapter *pAdapter);
+void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter);
+void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter);
+int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev);
+
+#endif /* __ET1310_TX_H__ */

drivers/staging/et131x/et131x_adapter.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_adapter.h - Header which includes the private adapter structure, along
+ *                    with related support structures, macros, definitions, etc.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_ADAPTER_H__
+#define __ET131X_ADAPTER_H__
+
+#include "et1310_address_map.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+
+/*
+ * Do not change these values: if changed, then change also in respective
+ * TXdma and Rxdma engines
+ */
+#define NUM_DESC_PER_RING_TX         512	// TX Do not change these values
+#define NUM_TCB                      64
+
+/*
+ * These values are all superseded by registry entries to facilitate tuning.
+ * Once the desired performance has been achieved, the optimal registry values
+ * should be re-populated to these #defines:
+ */
+#define NUM_TRAFFIC_CLASSES          1
+
+/*
+ * There are three ways of counting errors - if there are more than X errors
+ * in Y packets (represented by the "SAMPLE" macros), if there are more than
+ * N errors in a S mSec time period (the "PERIOD" macros), or if there are
+ * consecutive packets with errors (CONSEC_ERRORED_THRESH).  This last covers
+ * for "Bursty" errors, and the errored packets may well not be contiguous,
+ * but several errors where the packet counter has changed by less than a
+ * small amount will cause this count to increment.
+ */
+#define TX_PACKETS_IN_SAMPLE        10000
+#define TX_MAX_ERRORS_IN_SAMPLE     50
+
+#define TX_ERROR_PERIOD             1000
+#define TX_MAX_ERRORS_IN_PERIOD     10
+
+#define LINK_DETECTION_TIMER        5000
+
+#define TX_CONSEC_RANGE             5
+#define TX_CONSEC_ERRORED_THRESH    10
+
+#define LO_MARK_PERCENT_FOR_PSR     15
+#define LO_MARK_PERCENT_FOR_RX      15
+
+/* Macros for flag and ref count operations        */
+#define MP_SET_FLAG(_M, _F)         ((_M)->Flags |= (_F))
+#define MP_CLEAR_FLAG(_M, _F)       ((_M)->Flags &= ~(_F))
+#define MP_CLEAR_FLAGS(_M)          ((_M)->Flags = 0)
+#define MP_TEST_FLAG(_M, _F)        (((_M)->Flags & (_F)) != 0)
+#define MP_TEST_FLAGS(_M, _F)       (((_M)->Flags & (_F)) == (_F))
+#define MP_IS_FLAG_CLEAR(_M, _F)    (((_M)->Flags & (_F)) == 0)
+
+#define MP_INC_RCV_REF(_A)          atomic_inc(&(_A)->RcvRefCount)
+#define MP_DEC_RCV_REF(_A)          atomic_dec(&(_A)->RcvRefCount)
+#define MP_GET_RCV_REF(_A)          atomic_read(&(_A)->RcvRefCount)
+
+/* Macros specific to the private adapter structure */
+#define MP_TCB_RESOURCES_AVAILABLE(_M) ((_M)->TxRing.nBusySend < NUM_TCB)
+#define MP_TCB_RESOURCES_NOT_AVAILABLE(_M) ((_M)->TxRing.nBusySend >= NUM_TCB)
+
+#define MP_SHOULD_FAIL_SEND(_M)   ((_M)->Flags & fMP_ADAPTER_FAIL_SEND_MASK)
+#define MP_IS_NOT_READY(_M)       ((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK)
+#define MP_IS_READY(_M)           !((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK)
+
+#define MP_HAS_CABLE(_M)           !((_M)->Flags & fMP_ADAPTER_NO_CABLE)
+#define MP_LINK_DETECTED(_M)       !((_M)->Flags & fMP_ADAPTER_LINK_DETECTION)
+
+/* Counters for error rate monitoring */
+typedef struct _MP_ERR_COUNTERS {
+	u32 PktCountTxPackets;
+	u32 PktCountTxErrors;
+	u32 TimerBasedTxErrors;
+	u32 PktCountLastError;
+	u32 ErredConsecPackets;
+} MP_ERR_COUNTERS, *PMP_ERR_COUNTERS;
+
+/* RFD (Receive Frame Descriptor) */
+typedef struct _MP_RFD {
+	struct list_head list_node;
+	struct sk_buff *Packet;
+	u32 PacketSize;	// total size of receive frame
+	u16 iBufferIndex;
+	u8 iRingIndex;
+} MP_RFD, *PMP_RFD;
+
+/* Enum for Flow Control */
+typedef enum _eflow_control_t {
+	Both = 0,
+	TxOnly = 1,
+	RxOnly = 2,
+	None = 3
+} eFLOW_CONTROL_t, *PeFLOW_CONTROL_t;
+
+/* Struct to define some device statistics */
+typedef struct _ce_stats_t {
+	/* Link Input/Output stats */
+	uint64_t ipackets;	// # of in packets
+	uint64_t opackets;	// # of out packets
+
+	/* MIB II variables
+	 *
+	 * NOTE: atomic_t types are only guaranteed to store 24-bits; if we
+	 * MUST have 32, then we'll need another way to perform atomic
+	 * operations
+	 */
+	u32 unircv;	// # multicast packets received
+	atomic_t unixmt;	// # multicast packets for Tx
+	u32 multircv;	// # multicast packets received
+	atomic_t multixmt;	// # multicast packets for Tx
+	u32 brdcstrcv;	// # broadcast packets received
+	atomic_t brdcstxmt;	// # broadcast packets for Tx
+	u32 norcvbuf;	// # Rx packets discarded
+	u32 noxmtbuf;	// # Tx packets discarded
+
+	/* Transciever state informations. */
+	u8 xcvr_addr;
+	u32 xcvr_id;
+
+	/* Tx Statistics. */
+	u32 tx_uflo;		// Tx Underruns
+
+	u32 collisions;
+	u32 excessive_collisions;
+	u32 first_collision;
+	u32 late_collisions;
+	u32 max_pkt_error;
+	u32 tx_deferred;
+
+	/* Rx Statistics. */
+	u32 rx_ov_flow;	// Rx Over Flow
+
+	u32 length_err;
+	u32 alignment_err;
+	u32 crc_err;
+	u32 code_violations;
+	u32 other_errors;
+
+#ifdef CONFIG_ET131X_DEBUG
+	u32 UnhandledInterruptsPerSec;
+	u32 RxDmaInterruptsPerSec;
+	u32 TxDmaInterruptsPerSec;
+	u32 WatchDogInterruptsPerSec;
+#endif	/* CONFIG_ET131X_DEBUG */
+
+	u32 SynchrounousIterations;
+	INTERRUPT_t InterruptStatus;
+} CE_STATS_t, *PCE_STATS_t;
+
+/* The private adapter structure */
+struct et131x_adapter {
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+
+	struct work_struct task;
+
+	/* Flags that indicate current state of the adapter */
+	u32 Flags;
+	u32 HwErrCount;
+
+	/* Configuration  */
+	u8 PermanentAddress[ETH_ALEN];
+	u8 CurrentAddress[ETH_ALEN];
+	bool bOverrideAddress;
+	bool bEepromPresent;
+	u8 eepromData[2];
+
+	/* Spinlocks */
+	spinlock_t Lock;
+
+	spinlock_t TCBSendQLock;
+	spinlock_t TCBReadyQLock;
+	spinlock_t SendHWLock;
+	spinlock_t SendWaitLock;
+
+	spinlock_t RcvLock;
+	spinlock_t RcvPendLock;
+	spinlock_t FbrLock;
+
+	spinlock_t PHYLock;
+
+	/* Packet Filter and look ahead size */
+	u32 PacketFilter;
+	u32 ulLookAhead;
+	u32 uiLinkSpeed;
+	u32 uiDuplexMode;
+	u32 uiAutoNegStatus;
+	u8 ucLinkStatus;
+
+	/* multicast list */
+	u32 MCAddressCount;
+	u8 MCList[NIC_MAX_MCAST_LIST][ETH_ALEN];
+
+	/* MAC test */
+	TXMAC_TXTEST_t TxMacTest;
+
+	/* Pointer to the device's PCI register space */
+	ADDRESS_MAP_t __iomem *CSRAddress;
+
+	/* PCI config space info, for debug purposes only. */
+	u8 RevisionID;
+	u16 VendorID;
+	u16 DeviceID;
+	u16 SubVendorID;
+	u16 SubSystemID;
+	u32 CacheFillSize;
+	u16 PciXDevCtl;
+	u8 pci_lat_timer;
+	u8 pci_hdr_type;
+	u8 pci_bist;
+	u32 pci_cfg_state[64 / sizeof(u32)];
+
+	/* Registry parameters */
+	u8 SpeedDuplex;		// speed/duplex
+	eFLOW_CONTROL_t RegistryFlowControl;	// for 802.3x flow control
+	u8 RegistryWOLMatch;	// Enable WOL pattern-matching
+	u8 RegistryWOLLink;	// Link state change is independant
+	u8 RegistryPhyComa;	// Phy Coma mode enable/disable
+
+	u32 RegistryRxMemEnd;	// Size of internal rx memory
+	u8 RegistryMACStat;	// If set, read MACSTAT, else don't
+	u32 RegistryVlanTag;	// 802.1q Vlan TAG
+	u32 RegistryJumboPacket;	// Max supported ethernet packet size
+
+	u32 RegistryTxNumBuffers;
+	u32 RegistryTxTimeInterval;
+
+	u32 RegistryRxNumBuffers;
+	u32 RegistryRxTimeInterval;
+
+	/* Validation helpers */
+	u8 RegistryPMWOL;
+	u8 RegistryNMIDisable;
+	u32 RegistryDMACache;
+	u32 RegistrySCGain;
+	u8 RegistryPhyLoopbk;	// Enable Phy loopback
+
+	/* Derived from the registry: */
+	u8 AiForceDpx;		// duplex setting
+	u16 AiForceSpeed;		// 'Speed', user over-ride of line speed
+	eFLOW_CONTROL_t FlowControl;	// flow control validated by the far-end
+	enum {
+		NETIF_STATUS_INVALID = 0,
+		NETIF_STATUS_MEDIA_CONNECT,
+		NETIF_STATUS_MEDIA_DISCONNECT,
+		NETIF_STATUS_MAX
+	} MediaState;
+	u8 DriverNoPhyAccess;
+
+	/* Minimize init-time */
+	bool bQueryPending;
+	bool bSetPending;
+	bool bResetPending;
+	struct timer_list ErrorTimer;
+	bool bLinkTimerActive;
+	MP_POWER_MGMT PoMgmt;
+	INTERRUPT_t CachedMaskValue;
+
+	atomic_t RcvRefCount;	// Num packets not yet returned
+
+	/* Xcvr status at last poll */
+	MI_BMSR_t Bmsr;
+
+	/* Tx Memory Variables */
+	TX_RING_t TxRing;
+
+	/* Rx Memory Variables */
+	RX_RING_t RxRing;
+
+	/* ET1310 register Access */
+	JAGCORE_ACCESS_REGS JagCoreRegs;
+	PCI_CFG_SPACE_REGS PciCfgRegs;
+
+	/* Loopback specifics */
+	u8 ReplicaPhyLoopbk;	// Replica Enable
+	u8 ReplicaPhyLoopbkPF;	// Replica Enable Pass/Fail
+
+	/* Stats */
+	CE_STATS_t Stats;
+
+	struct net_device_stats net_stats;
+	struct net_device_stats net_stats_prev;
+};
+
+#define MPSendPacketsHandler  MPSendPackets
+#define MP_FREE_SEND_PACKET_FUN(Adapter, pMpTcb) \
+	et131x_free_send_packet(Adapter, pMpTcb)
+#define MpSendPacketFun(Adapter, Packet) MpSendPacket(Adapter, Packet)
+
+#endif /* __ET131X_ADAPTER_H__ */

drivers/staging/et131x/et131x_config.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_config.c - Handles parsing of configuration data during
+ *                   initialization.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+#include "et131x_config.h"
+
+#include "et1310_tx.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/* Defines for Parameter Default/Min/Max vaules */
+#define PARM_SPEED_DUPLEX_DEF   0
+#define PARM_SPEED_DUPLEX_MIN   0
+#define PARM_SPEED_DUPLEX_MAX   5
+
+#define PARM_VLAN_TAG_DEF       0
+#define PARM_VLAN_TAG_MIN       0
+#define PARM_VLAN_TAG_MAX       4095
+
+#define PARM_FLOW_CTL_DEF       0
+#define PARM_FLOW_CTL_MIN       0
+#define PARM_FLOW_CTL_MAX       3
+
+#define PARM_WOL_LINK_DEF       3
+#define PARM_WOL_LINK_MIN       0
+#define PARM_WOL_LINK_MAX       3
+
+#define PARM_WOL_MATCH_DEF      7
+#define PARM_WOL_MATCH_MIN      0
+#define PARM_WOL_MATCH_MAX      7
+
+#define PARM_JUMBO_PKT_DEF      1514
+#define PARM_JUMBO_PKT_MIN      1514
+#define PARM_JUMBO_PKT_MAX      9216
+
+#define PARM_PHY_COMA_DEF       0
+#define PARM_PHY_COMA_MIN       0
+#define PARM_PHY_COMA_MAX       1
+
+#define PARM_RX_NUM_BUFS_DEF    4
+#define PARM_RX_NUM_BUFS_MIN    1
+#define PARM_RX_NUM_BUFS_MAX    64
+
+#define PARM_RX_TIME_INT_DEF    10
+#define PARM_RX_TIME_INT_MIN    2
+#define PARM_RX_TIME_INT_MAX    320
+
+#define PARM_TX_NUM_BUFS_DEF    4
+#define PARM_TX_NUM_BUFS_MIN    1
+#define PARM_TX_NUM_BUFS_MAX    40
+
+#define PARM_TX_TIME_INT_DEF    40
+#define PARM_TX_TIME_INT_MIN    1
+#define PARM_TX_TIME_INT_MAX    140
+
+#define PARM_RX_MEM_END_DEF     0x2bc
+#define PARM_RX_MEM_END_MIN     0
+#define PARM_RX_MEM_END_MAX     0x3ff
+
+#define PARM_MAC_STAT_DEF       1
+#define PARM_MAC_STAT_MIN       0
+#define PARM_MAC_STAT_MAX       1
+
+#define PARM_SC_GAIN_DEF        7
+#define PARM_SC_GAIN_MIN        0
+#define PARM_SC_GAIN_MAX        7
+
+#define PARM_PM_WOL_DEF         0
+#define PARM_PM_WOL_MIN         0
+#define PARM_PM_WOL_MAX         1
+
+#define PARM_NMI_DISABLE_DEF    0
+#define PARM_NMI_DISABLE_MIN    0
+#define PARM_NMI_DISABLE_MAX    2
+
+#define PARM_DMA_CACHE_DEF      0
+#define PARM_DMA_CACHE_MIN      0
+#define PARM_DMA_CACHE_MAX      15
+
+#define PARM_PHY_LOOPBK_DEF     0
+#define PARM_PHY_LOOPBK_MIN     0
+#define PARM_PHY_LOOPBK_MAX     1
+
+#define PARM_MAC_ADDRESS_DEF    { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }
+
+/* Module parameter for disabling NMI
+ * et131x_speed_set :
+ * Set Link speed and dublex manually (0-5)  [0]
+ *  1 : 10Mb   Half-Duplex
+ *  2 : 10Mb   Full-Duplex
+ *  3 : 100Mb  Half-Duplex
+ *  4 : 100Mb  Full-Duplex
+ *  5 : 1000Mb Full-Duplex
+ *  0 : Auto Speed Auto Dublex // default
+ */
+static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF;
+module_param(et131x_nmi_disable, uint, 0);
+MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]");
+
+/* Module parameter for manual speed setting
+ * et131x_nmi_disable :
+ * Disable NMI (0-2) [0]
+ *  0 :
+ *  1 :
+ *  2 :
+ */
+static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF;
+module_param(et131x_speed_set, uint, 0);
+MODULE_PARM_DESC(et131x_speed_set,
+		 "Set Link speed and dublex manually (0-5)  [0] \n  1 : 10Mb   Half-Duplex \n  2 : 10Mb   Full-Duplex \n  3 : 100Mb  Half-Duplex \n  4 : 100Mb  Full-Duplex \n  5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex");
+
+/**
+ * et131x_config_parse
+ * @pAdapter: pointer to the private adapter struct
+ *
+ * Parses a configuration from some location (module parameters, for example)
+ * into the private adapter struct
+ */
+void et131x_config_parse(struct et131x_adapter *pAdapter)
+{
+	uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/*
+	 * The NDIS driver uses the registry to store persistent per-device
+	 * configuration, and reads this configuration into the appropriate
+	 * elements of the private adapter structure on initialization.
+	 * Because Linux has no analog to the registry, use this function to
+	 * initialize the private adapter structure with a default
+	 * configuration.
+	 *
+	 * One other possibility is to use a series of module parameters which
+	 * can be passed in by the caller when the module is initialized.
+	 * However, this implementation does not allow for seperate
+	 * configurations in the event multiple devices are present, and hence
+	 * will not suffice.
+	 *
+	 * If another method is derived which addresses this problem, this is
+	 * where it should be implemented.
+	 */
+
+	 /* Set the private adapter struct with default values for the
+	  * corresponding parameters
+	  */
+	if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) {
+		DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n",
+			    et131x_speed_set);
+		pAdapter->SpeedDuplex = et131x_speed_set;
+	} else {
+		pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF;
+	}
+
+	//  pAdapter->SpeedDuplex            = PARM_SPEED_DUPLEX_DEF;
+
+	pAdapter->RegistryVlanTag = PARM_VLAN_TAG_DEF;
+	pAdapter->RegistryFlowControl = PARM_FLOW_CTL_DEF;
+	pAdapter->RegistryWOLLink = PARM_WOL_LINK_DEF;
+	pAdapter->RegistryWOLMatch = PARM_WOL_MATCH_DEF;
+	pAdapter->RegistryJumboPacket = PARM_JUMBO_PKT_DEF;
+	pAdapter->RegistryPhyComa = PARM_PHY_COMA_DEF;
+	pAdapter->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF;
+	pAdapter->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF;
+	pAdapter->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF;
+	pAdapter->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF;
+	pAdapter->RegistryRxMemEnd = PARM_RX_MEM_END_DEF;
+	pAdapter->RegistryMACStat = PARM_MAC_STAT_DEF;
+	pAdapter->RegistrySCGain = PARM_SC_GAIN_DEF;
+	pAdapter->RegistryPMWOL = PARM_PM_WOL_DEF;
+
+	if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) {
+		pAdapter->RegistryNMIDisable = et131x_nmi_disable;
+	} else {
+		pAdapter->RegistryNMIDisable = PARM_NMI_DISABLE_DEF;
+	}
+
+	pAdapter->RegistryDMACache = PARM_DMA_CACHE_DEF;
+	pAdapter->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF;
+
+	/* Set the MAC address to a default */
+	memcpy(pAdapter->CurrentAddress, macAddrDef, ETH_ALEN);
+	pAdapter->bOverrideAddress = false;
+
+	DBG_TRACE(et131x_dbginfo,
+		  "Default MAC Address  : %02x:%02x:%02x:%02x:%02x:%02x\n",
+		  pAdapter->CurrentAddress[0], pAdapter->CurrentAddress[1],
+		  pAdapter->CurrentAddress[2], pAdapter->CurrentAddress[3],
+		  pAdapter->CurrentAddress[4], pAdapter->CurrentAddress[5]);
+
+	/* Decode SpeedDuplex
+	 *
+	 * Set up as if we are auto negotiating always and then change if we
+	 * go into force mode
+	 */
+	pAdapter->AiForceSpeed = 0;	// Auto speed
+	pAdapter->AiForceDpx = 0;	// Auto FDX
+
+	/* If we are the 10/100 device, and gigabit is somehow requested then
+	 * knock it down to 100 full.
+	 */
+	if ((pAdapter->DeviceID == ET131X_PCI_DEVICE_ID_FAST) &&
+	    (pAdapter->SpeedDuplex == 5)) {
+		pAdapter->SpeedDuplex = 4;
+	}
+
+	switch (pAdapter->SpeedDuplex) {
+	case 1:		// 10Mb   Half-Duplex
+		pAdapter->AiForceSpeed = 10;
+		pAdapter->AiForceDpx = 1;
+		break;
+
+	case 2:		// 10Mb   Full-Duplex
+		pAdapter->AiForceSpeed = 10;
+		pAdapter->AiForceDpx = 2;
+		break;
+
+	case 3:		// 100Mb  Half-Duplex
+		pAdapter->AiForceSpeed = 100;
+		pAdapter->AiForceDpx = 1;
+		break;
+
+	case 4:		// 100Mb  Full-Duplex
+		pAdapter->AiForceSpeed = 100;
+		pAdapter->AiForceDpx = 2;
+		break;
+
+	case 5:		// 1000Mb Full-Duplex
+		pAdapter->AiForceSpeed = 1000;
+		pAdapter->AiForceDpx = 2;
+		break;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}

drivers/staging/et131x/et131x_config.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_config.h - Defines, structs, enums, prototypes, etc. to support
+ *                   et131x_config.c
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_CONFIG_H__
+#define __ET131X_CONFIG_H__
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void et131x_config_parse(struct et131x_adapter *adapter);
+
+#endif /* __ET131X_CONFIG_H__ */

drivers/staging/et131x/et131x_debug.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_debug.c - Routines used for debugging.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifdef CONFIG_ET131X_DEBUG
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/random.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_netdev.h"
+#include "et131x_config.h"
+#include "et131x_isr.h"
+
+#include "et1310_address_map.h"
+#include "et1310_jagcore.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+#include "et1310_mac.h"
+
+/* Data for debugging facilities */
+extern dbg_info_t *et131x_dbginfo;
+
+/**
+ * DumpTxQueueContents - Dump out the tx queue and the shadow pointers
+ * @pAdapter: pointer to our adapter structure
+ */
+void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter)
+{
+	MMC_t __iomem *mmc = &pAdapter->CSRAddress->mmc;
+	uint32_t TxQueueAddr;
+
+	if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) {
+		for (TxQueueAddr = 0x200; TxQueueAddr < 0x3ff; TxQueueAddr++) {
+			MMC_SRAM_ACCESS_t sram_access;
+
+			sram_access.value = readl(&mmc->sram_access.value);
+			sram_access.bits.req_addr = TxQueueAddr;
+			sram_access.bits.req_access = 1;
+			writel(sram_access.value, &mmc->sram_access.value);
+
+			DBG_PRINT("Addr 0x%x, Access 0x%08x\t"
+				  "Value 1 0x%08x, Value 2 0x%08x, "
+				  "Value 3 0x%08x, Value 4 0x%08x, \n",
+				  TxQueueAddr,
+				  readl(&mmc->sram_access.value),
+				  readl(&mmc->sram_word1),
+				  readl(&mmc->sram_word2),
+				  readl(&mmc->sram_word3),
+				  readl(&mmc->sram_word4));
+		}
+
+		DBG_PRINT("Shadow Pointers 0x%08x\n",
+			  readl(&pAdapter->CSRAddress->txmac.shadow_ptr.value));
+	}
+}
+
+/**
+ * DumpDeviceBlock
+ * @pAdapter: pointer to our adapter
+ *
+ * Dumps the first 64 regs of each block of the et-1310 (each block is
+ * mapped to a new page, each page is 4096 bytes).
+ */
+#define NUM_BLOCKS 8
+void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter,
+		     uint32_t Block)
+{
+	uint32_t Address1, Address2;
+	uint32_t __iomem *BigDevicePointer =
+		(uint32_t __iomem *) pAdapter->CSRAddress;
+	const char *BlockNames[NUM_BLOCKS] = {
+		"Global", "Tx DMA", "Rx DMA", "Tx MAC",
+		"Rx MAC", "MAC", "MAC Stat", "MMC"
+	};
+
+	/* Output the debug counters to the debug terminal */
+	if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) {
+		DBG_PRINT("%s block\n", BlockNames[Block]);
+		BigDevicePointer += Block * 1024;
+		for (Address1 = 0; Address1 < 8; Address1++) {
+			for (Address2 = 0; Address2 < 8; Address2++) {
+				if (Block == 0 &&
+				    (Address1 * 8 + Address2) == 6) {
+					DBG_PRINT("  ISR    , ");
+				} else {
+					DBG_PRINT("0x%08x, ",
+						  readl(BigDevicePointer++));
+				}
+			}
+			DBG_PRINT("\n");
+		}
+		DBG_PRINT("\n");
+	}
+}
+
+/**
+ * DumpDeviceReg
+ * @pAdapter: pointer to our adapter
+ *
+ * Dumps the first 64 regs of each block of the et-1310 (each block is
+ * mapped to a new page, each page is 4096 bytes).
+ */
+void DumpDeviceReg(int dbgLvl, struct et131x_adapter *pAdapter)
+{
+	uint32_t Address1, Address2;
+	uint32_t Block;
+	uint32_t __iomem *BigDevicePointer =
+		(uint32_t __iomem *) pAdapter->CSRAddress;
+	uint32_t __iomem *Pointer;
+	const char *BlockNames[NUM_BLOCKS] = {
+		"Global", "Tx DMA", "Rx DMA", "Tx MAC",
+		"Rx MAC", "MAC", "MAC Stat", "MMC"
+	};
+
+	/* Output the debug counters to the debug terminal */
+	if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) {
+		for (Block = 0; Block < NUM_BLOCKS; Block++) {
+			DBG_PRINT("%s block\n", BlockNames[Block]);
+			Pointer = BigDevicePointer + (Block * 1024);
+
+			for (Address1 = 0; Address1 < 8; Address1++) {
+				for (Address2 = 0; Address2 < 8; Address2++) {
+					DBG_PRINT("0x%08x, ",
+						  readl(Pointer++));
+				}
+				DBG_PRINT("\n");
+			}
+			DBG_PRINT("\n");
+		}
+	}
+}
+
+#endif // CONFIG_ET131X_DEBUG

drivers/staging/et131x/et131x_debug.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_debug.h - Defines, structs, enums, prototypes, etc. used for
+ *                  outputting debug messages to the system logging facility
+ *                  (ksyslogd)
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_DBG_H__
+#define __ET131X_DBG_H__
+
+/* Define Masks for debugging types/levels */
+#define DBG_ERROR_ON        0x00000001L
+#define DBG_WARNING_ON      0x00000002L
+#define DBG_NOTICE_ON       0x00000004L
+#define DBG_TRACE_ON        0x00000008L
+#define DBG_VERBOSE_ON      0x00000010L
+#define DBG_PARAM_ON        0x00000020L
+#define DBG_BREAK_ON        0x00000040L
+#define DBG_RX_ON           0x00000100L
+#define DBG_TX_ON           0x00000200L
+
+#ifdef CONFIG_ET131X_DEBUG
+
+/*
+ * Set the level of debugging if not done with a preprocessor define. See
+ * et131x_main.c, function et131x_init_module() for how the debug level
+ * translates into the types of messages displayed.
+ */
+#ifndef DBG_LVL
+#define DBG_LVL	3
+#endif /* DBG_LVL */
+
+#define DBG_DEFAULTS		(DBG_ERROR_ON | DBG_WARNING_ON | DBG_BREAK_ON )
+
+#define DBG_FLAGS(A)		(A)->dbgFlags
+#define DBG_NAME(A)		(A)->dbgName
+#define DBG_LEVEL(A)		(A)->dbgLevel
+
+#ifndef DBG_PRINT
+#define DBG_PRINT(S...)		printk(KERN_DEBUG S)
+#endif /* DBG_PRINT */
+
+#ifndef DBG_PRINTC
+#define DBG_PRINTC(S...)	printk(S)
+#endif /* DBG_PRINTC */
+
+#ifndef DBG_TRAP
+#define DBG_TRAP		{}	/* BUG() */
+#endif /* DBG_TRAP */
+
+#define _ENTER_STR	">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>"
+#define _LEAVE_STR	"<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<"
+
+#define _DBG_ENTER(A)	printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A),	\
+				++DBG_LEVEL(A), _ENTER_STR, __func__)
+#define _DBG_LEAVE(A)	printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A),	\
+				DBG_LEVEL(A)--, _LEAVE_STR, __func__)
+
+#define DBG_ENTER(A)        {if (DBG_FLAGS(A) & DBG_TRACE_ON) \
+                                _DBG_ENTER(A);}
+
+#define DBG_LEAVE(A)        {if (DBG_FLAGS(A) & DBG_TRACE_ON) \
+                                _DBG_LEAVE(A);}
+
+#define DBG_PARAM(A,N,F,S...)   {if (DBG_FLAGS(A) & DBG_PARAM_ON) \
+                                    DBG_PRINT("  %s -- "F"\n",N,S);}
+
+#define DBG_ERROR(A,S...)	\
+	if (DBG_FLAGS(A) & DBG_ERROR_ON) {				\
+		DBG_PRINT("%s:ERROR:%s ",DBG_NAME(A), __func__);	\
+		DBG_PRINTC(S);						\
+		DBG_TRAP;						\
+	}
+
+#define DBG_WARNING(A,S...) {if (DBG_FLAGS(A) & DBG_WARNING_ON) \
+                                {DBG_PRINT("%s:WARNING:%s ",DBG_NAME(A),__func__);DBG_PRINTC(S);}}
+
+#define DBG_NOTICE(A,S...)  {if (DBG_FLAGS(A) & DBG_NOTICE_ON) \
+                                {DBG_PRINT("%s:NOTICE:%s ",DBG_NAME(A),__func__);DBG_PRINTC(S);}}
+
+#define DBG_TRACE(A,S...)   {if (DBG_FLAGS(A) & DBG_TRACE_ON) \
+                                {DBG_PRINT("%s:TRACE:%s ",DBG_NAME(A), __func__);DBG_PRINTC(S);}}
+
+#define DBG_VERBOSE(A,S...) {if (DBG_FLAGS(A) & DBG_VERBOSE_ON) \
+                                {DBG_PRINT("%s:VERBOSE:%s ",DBG_NAME(A), __func__);DBG_PRINTC(S);}}
+
+#define DBG_RX(A,S...)      {if (DBG_FLAGS(A) & DBG_RX_ON) \
+                                {DBG_PRINT(S);}}
+
+#define DBG_RX_ENTER(A)     {if (DBG_FLAGS(A) & DBG_RX_ON) \
+                                _DBG_ENTER(A);}
+
+#define DBG_RX_LEAVE(A)     {if (DBG_FLAGS(A) & DBG_RX_ON) \
+                                _DBG_LEAVE(A);}
+
+#define DBG_TX(A,S...)      {if (DBG_FLAGS(A) & DBG_TX_ON) \
+                                {DBG_PRINT(S);}}
+
+#define DBG_TX_ENTER(A)     {if (DBG_FLAGS(A) & DBG_TX_ON) \
+                                _DBG_ENTER(A);}
+
+#define DBG_TX_LEAVE(A)     {if (DBG_FLAGS(A) & DBG_TX_ON) \
+                                _DBG_LEAVE(A);}
+
+#define DBG_ASSERT(C)       {if (!(C)) \
+                                {DBG_PRINT("ASSERT(%s) -- %s#%d (%s)\n", \
+                                    #C,__FILE__,__LINE__,__func__); \
+                                DBG_TRAP;}}
+#define STATIC
+
+typedef struct {
+	char *dbgName;
+	int dbgLevel;
+	unsigned long dbgFlags;
+} dbg_info_t;
+
+#else /* CONFIG_ET131X_DEBUG */
+
+#define DBG_DEFN
+#define DBG_TRAP
+#define DBG_PRINT(S...)
+#define DBG_ENTER(A)
+#define DBG_LEAVE(A)
+#define DBG_PARAM(A,N,F,S...)
+#define DBG_ERROR(A,S...)
+#define DBG_WARNING(A,S...)
+#define DBG_NOTICE(A,S...)
+#define DBG_TRACE(A,S...)
+#define DBG_VERBOSE(A,S...)
+#define DBG_RX(A,S...)
+#define DBG_RX_ENTER(A)
+#define DBG_RX_LEAVE(A)
+#define DBG_TX(A,S...)
+#define DBG_TX_ENTER(A)
+#define DBG_TX_LEAVE(A)
+#define DBG_ASSERT(C)
+#define STATIC static
+
+#endif /* CONFIG_ET131X_DEBUG */
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *adapter);
+void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *adapter,
+		     unsigned int Block);
+void DumpDeviceReg(int dbgLvl, struct et131x_adapter *adapter);
+
+#endif /* __ET131X_DBG_H__ */

drivers/staging/et131x/et131x_defs.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_defs.h - Defines, structs, enums, prototypes, etc. to assist with OS
+ *                 compatibility
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_DEFS_H__
+#define __ET131X_DEFS_H__
+
+/* Packet and header sizes */
+#define NIC_MIN_PACKET_SIZE	60
+#define NIC_HEADER_SIZE		ETH_HLEN	/* 14 */
+
+/* Multicast list size */
+#define NIC_MAX_MCAST_LIST	128
+
+/* Supported Filters */
+#define ET131X_PACKET_TYPE_DIRECTED		0x0001
+#define ET131X_PACKET_TYPE_MULTICAST		0x0002
+#define ET131X_PACKET_TYPE_BROADCAST		0x0004
+#define ET131X_PACKET_TYPE_PROMISCUOUS		0x0008
+#define ET131X_PACKET_TYPE_ALL_MULTICAST	0x0010
+
+/* Tx Timeout */
+#define ET131X_TX_TIMEOUT	(1 * HZ)
+#define NIC_SEND_HANG_THRESHOLD	0
+
+/* MP_TCB flags */
+#define fMP_DEST_MULTI			0x00000001
+#define fMP_DEST_BROAD			0x00000002
+
+/* MP_ADAPTER flags */
+#define fMP_ADAPTER_RECV_LOOKASIDE	0x00000004
+#define fMP_ADAPTER_INTERRUPT_IN_USE	0x00000008
+#define fMP_ADAPTER_SECONDARY		0x00000010
+
+/* MP_SHARED flags */
+#define fMP_ADAPTER_SHUTDOWN		0x00100000
+#define fMP_ADAPTER_LOWER_POWER		0x00200000
+
+#define fMP_ADAPTER_NON_RECOVER_ERROR	0x00800000
+#define fMP_ADAPTER_RESET_IN_PROGRESS	0x01000000
+#define fMP_ADAPTER_NO_CABLE		0x02000000
+#define fMP_ADAPTER_HARDWARE_ERROR	0x04000000
+#define fMP_ADAPTER_REMOVE_IN_PROGRESS	0x08000000
+#define fMP_ADAPTER_HALT_IN_PROGRESS	0x10000000
+#define fMP_ADAPTER_LINK_DETECTION	0x20000000
+
+#define fMP_ADAPTER_FAIL_SEND_MASK	0x3ff00000
+#define fMP_ADAPTER_NOT_READY_MASK	0x3ff00000
+
+/* Some offsets in PCI config space that are actually used. */
+#define ET1310_PCI_PM_CAPABILITY	0x40
+#define ET1310_PCI_PM_CSR		0x44
+#define ET1310_PCI_MAX_PYLD		0x4C
+#define ET1310_PCI_DEV_CTRL		0x50
+#define ET1310_PCI_DEV_STAT		0x52
+#define ET1310_NMI_DISABLE		0x61
+#define ET1310_PCI_MAC_ADDRESS		0xA4
+#define ET1310_PCI_EEPROM_STATUS	0xB2
+#define ET1310_PCI_PHY_INDEX_REG	0xB4
+#define ET1310_PCI_ACK_NACK		0xC0
+#define ET1310_PCI_REPLAY		0xC2
+#define ET1310_PCI_L0L1LATENCY		0xCF
+#define ET1310_PCI_SEL_PHY_CTRL		0xE4
+#define ET1310_PCI_ADVANCED_ERR		0x100
+
+/* PCI Vendor/Product IDs */
+#define ET131X_PCI_VENDOR_ID		0x11C1	// Agere Systems
+#define ET131X_PCI_DEVICE_ID_GIG	0xED00	// ET1310 1000 Base-T
+#define ET131X_PCI_DEVICE_ID_FAST	0xED01	// ET1310 100  Base-T
+
+/* Define order of magnitude converter */
+#define NANO_IN_A_MICRO	1000
+
+#endif /* __ET131X_DEFS_H__ */

drivers/staging/et131x/et131x_initpci.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_initpci.c - Routines and data used to register the driver with the
+ *                    PCI (and PCI Express) subsystem, as well as basic driver
+ *                    init and startup.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/random.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_netdev.h"
+#include "et131x_config.h"
+#include "et131x_isr.h"
+
+#include "et1310_address_map.h"
+#include "et1310_jagcore.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+#include "et1310_mac.h"
+#include "et1310_eeprom.h"
+
+
+int __devinit et131x_pci_setup(struct pci_dev *pdev,
+			       const struct pci_device_id *ent);
+void __devexit et131x_pci_remove(struct pci_dev *pdev);
+
+
+/* Modinfo parameters (filled out using defines from et131x_version.h) */
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+/* Module Parameters and related data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+static u32 et131x_debug_level = DBG_LVL;
+static u32 et131x_debug_flags = DBG_DEFAULTS;
+
+/*
+et131x_debug_level :
+ Level of debugging desired (0-7)
+   7 : DBG_RX_ON | DBG_TX_ON
+   6 : DBG_PARAM_ON
+   5 : DBG_VERBOSE_ON
+   4 : DBG_TRACE_ON
+   3 : DBG_NOTICE_ON
+   2 : no debug info
+   1 : no debug info
+   0 : no debug info
+*/
+
+module_param(et131x_debug_level, uint, 0);
+module_param(et131x_debug_flags, uint, 0);
+
+MODULE_PARM_DESC(et131x_debug_level, "Level of debugging desired (0-7)");
+
+static dbg_info_t et131x_info = { DRIVER_NAME_EXT, 0, 0 };
+dbg_info_t *et131x_dbginfo = &et131x_info;
+#endif /* CONFIG_ET131X_DEBUG */
+
+static struct pci_device_id et131x_pci_table[] __devinitdata = {
+	{ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_GIG, PCI_ANY_ID,
+	 PCI_ANY_ID, 0, 0, 0UL},
+	{ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_FAST, PCI_ANY_ID,
+	 PCI_ANY_ID, 0, 0, 0UL},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, et131x_pci_table);
+
+static struct pci_driver et131x_driver = {
+      .name	= DRIVER_NAME,
+      .id_table	= et131x_pci_table,
+      .probe	= et131x_pci_setup,
+      .remove	= __devexit_p(et131x_pci_remove),
+      .suspend	= NULL,		//et131x_pci_suspend,
+      .resume	= NULL,		//et131x_pci_resume,
+};
+
+
+/**
+ * et131x_init_module - The "main" entry point called on driver initialization
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_init_module(void)
+{
+	int result;
+
+#ifdef CONFIG_ET131X_DEBUG
+	/* Set the level of debug messages displayed using the module
+	 * parameter
+	 */
+	et131x_dbginfo->dbgFlags = et131x_debug_flags;
+
+	switch (et131x_debug_level) {
+	case 7:
+		et131x_dbginfo->dbgFlags |= (DBG_RX_ON | DBG_TX_ON);
+
+	case 6:
+		et131x_dbginfo->dbgFlags |= DBG_PARAM_ON;
+
+	case 5:
+		et131x_dbginfo->dbgFlags |= DBG_VERBOSE_ON;
+
+	case 4:
+		et131x_dbginfo->dbgFlags |= DBG_TRACE_ON;
+
+	case 3:
+		et131x_dbginfo->dbgFlags |= DBG_NOTICE_ON;
+
+	case 2:
+	case 1:
+	case 0:
+	default:
+		break;
+	}
+#endif /* CONFIG_ET131X_DEBUG */
+
+	DBG_ENTER(et131x_dbginfo);
+	DBG_PRINT("%s\n", DRIVER_INFO);
+
+	result = pci_register_driver(&et131x_driver);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return result;
+}
+
+/**
+ * et131x_cleanup_module - The entry point called on driver cleanup
+ */
+void et131x_cleanup_module(void)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	pci_unregister_driver(&et131x_driver);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/*
+ * These macros map the driver-specific init_module() and cleanup_module()
+ * routines so they can be called by the kernel.
+ */
+module_init(et131x_init_module);
+module_exit(et131x_cleanup_module);
+
+
+/**
+ * et131x_find_adapter - Find the adapter and get all the assigned resources
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
+{
+	int result;
+	uint8_t eepromStat;
+	uint8_t maxPayload = 0;
+	uint8_t read_size_reg;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Allow disabling of Non-Maskable Interrupts in I/O space, to
+	 * support validation.
+	 */
+	if (adapter->RegistryNMIDisable) {
+		uint8_t RegisterVal;
+
+		RegisterVal = inb(ET1310_NMI_DISABLE);
+		RegisterVal &= 0xf3;
+
+		if (adapter->RegistryNMIDisable == 2) {
+			RegisterVal |= 0xc;
+		}
+
+		outb(ET1310_NMI_DISABLE, RegisterVal);
+	}
+
+	/* We first need to check the EEPROM Status code located at offset
+	 * 0xB2 of config space
+	 */
+	result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS,
+				      &eepromStat);
+
+	/* THIS IS A WORKAROUND:
+ 	 * I need to call this function twice to get my card in a
+	 * LG M1 Express Dual running. I tried also a msleep before this
+	 * function, because I thougth there could be some time condidions
+	 * but it didn't work. Call the whole function twice also work.
+	 */
+	result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS,
+				      &eepromStat);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for "
+			  "EEPROM Status\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	/* Determine if the error(s) we care about are present.  If they are
+	 * present, we need to fail.
+	 */
+	if (eepromStat & 0x4C) {
+		result = pci_read_config_byte(pdev, PCI_REVISION_ID,
+					      &adapter->RevisionID);
+		if (result != PCIBIOS_SUCCESSFUL) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Could not read PCI config space for "
+				  "Revision ID\n");
+			DBG_LEAVE(et131x_dbginfo);
+			return -EIO;
+		} else if (adapter->RevisionID == 0x01) {
+			int32_t nLoop;
+			uint8_t ucTemp[4] = { 0xFE, 0x13, 0x10, 0xFF };
+
+			/* Re-write the first 4 bytes if we have an eeprom
+			 * present and the revision id is 1, this fixes the
+			 * corruption seen with 1310 B Silicon
+			 */
+			for (nLoop = 0; nLoop < 3; nLoop++) {
+				EepromWriteByte(adapter, nLoop, ucTemp[nLoop],
+						0, SINGLE_BYTE);
+			}
+		}
+
+		DBG_ERROR(et131x_dbginfo,
+			  "Fatal EEPROM Status Error - 0x%04x\n", eepromStat);
+
+		/* This error could mean that there was an error reading the
+		 * eeprom or that the eeprom doesn't exist.  We will treat
+		 * each case the same and not try to gather additional
+		 * information that normally would come from the eeprom, like
+		 * MAC Address
+		 */
+		adapter->bEepromPresent = false;
+
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	} else {
+		DBG_TRACE(et131x_dbginfo, "EEPROM Status Code - 0x%04x\n",
+			  eepromStat);
+		adapter->bEepromPresent = true;
+	}
+
+	/* Read the EEPROM for information regarding LED behavior. Refer to
+	 * ET1310_phy.c, et131x_xcvr_init(), for its use.
+	 */
+	EepromReadByte(adapter, 0x70, &adapter->eepromData[0], 0, SINGLE_BYTE);
+	EepromReadByte(adapter, 0x71, &adapter->eepromData[1], 0, SINGLE_BYTE);
+
+	if (adapter->eepromData[0] != 0xcd) {
+		adapter->eepromData[1] = 0x00;	// Disable all optional features
+	}
+
+	/* Let's set up the PORT LOGIC Register.  First we need to know what
+	 * the max_payload_size is
+	 */
+	result = pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &maxPayload);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for "
+			  "Max Payload Size\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	/* Program the Ack/Nak latency and replay timers */
+	maxPayload &= 0x07;	// Only the lower 3 bits are valid
+
+	if (maxPayload < 2) {
+		const uint16_t AckNak[2] = { 0x76, 0xD0 };
+		const uint16_t Replay[2] = { 0x1E0, 0x2ED };
+
+		result = pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
+					       AckNak[maxPayload]);
+		if (result != PCIBIOS_SUCCESSFUL) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Could not write PCI config space "
+				  "for ACK/NAK\n");
+			DBG_LEAVE(et131x_dbginfo);
+			return -EIO;
+		}
+
+		result = pci_write_config_word(pdev, ET1310_PCI_REPLAY,
+					       Replay[maxPayload]);
+		if (result != PCIBIOS_SUCCESSFUL) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Could not write PCI config space "
+				  "for Replay Timer\n");
+			DBG_LEAVE(et131x_dbginfo);
+			return -EIO;
+		}
+	}
+
+	/* l0s and l1 latency timers.  We are using default values.
+	 * Representing 001 for L0s and 010 for L1
+	 */
+	result = pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Could not write PCI config space for "
+			  "Latency Timers\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	/* Change the max read size to 2k */
+	result = pci_read_config_byte(pdev, 0x51, &read_size_reg);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Could not read PCI config space for Max read size\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	read_size_reg &= 0x8f;
+	read_size_reg |= 0x40;
+
+	result = pci_write_config_byte(pdev, 0x51, read_size_reg);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Could not write PCI config space for Max read size\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	/* PCI Express Configuration registers 0x48-0x5B (Device Control) */
+	result = pci_read_config_word(pdev, ET1310_PCI_DEV_CTRL,
+				      &adapter->PciXDevCtl);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Could not read PCI config space for PCI Express Dev Ctl\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return -EIO;
+	}
+
+	/* Get MAC address from config space if an eeprom exists, otherwise
+	 * the MAC address there will not be valid
+	 */
+	if (adapter->bEepromPresent) {
+		int i;
+
+		for (i = 0; i < ETH_ALEN; i++) {
+			result = pci_read_config_byte(
+					pdev, ET1310_PCI_MAC_ADDRESS + i,
+					adapter->PermanentAddress + i);
+			if (result != PCIBIOS_SUCCESSFUL) {
+				DBG_ERROR(et131x_dbginfo,
+					  "Could not read PCI config space for MAC address\n");
+				DBG_LEAVE(et131x_dbginfo);
+				return -EIO;
+			}
+		}
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+/**
+ * et131x_error_timer_handler
+ * @data: timer-specific variable; here a pointer to our adapter structure
+ *
+ * The routine called when the error timer expires, to track the number of
+ * recurring errors.
+ */
+void et131x_error_timer_handler(unsigned long data)
+{
+	struct et131x_adapter *pAdapter = (struct et131x_adapter *) data;
+	PM_CSR_t pm_csr;
+
+	pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+
+	if (pm_csr.bits.pm_phy_sw_coma == 0) {
+		if (pAdapter->RegistryMACStat) {
+			UpdateMacStatHostCounters(pAdapter);
+		}
+	} else {
+		DBG_VERBOSE(et131x_dbginfo,
+			    "No interrupts, in PHY coma, pm_csr = 0x%x\n",
+			    pm_csr.value);
+	}
+
+	if (!pAdapter->Bmsr.bits.link_status &&
+	    pAdapter->RegistryPhyComa &&
+	    pAdapter->PoMgmt.TransPhyComaModeOnBoot < 11) {
+		pAdapter->PoMgmt.TransPhyComaModeOnBoot++;
+	}
+
+	if (pAdapter->PoMgmt.TransPhyComaModeOnBoot == 10) {
+		if (!pAdapter->Bmsr.bits.link_status
+		    && pAdapter->RegistryPhyComa) {
+			if (pm_csr.bits.pm_phy_sw_coma == 0) {
+				// NOTE - This was originally a 'sync with interrupt'. How
+				//        to do that under Linux?
+				et131x_enable_interrupts(pAdapter);
+				EnablePhyComa(pAdapter);
+			}
+		}
+	}
+
+	/* This is a periodic timer, so reschedule */
+	mod_timer(&pAdapter->ErrorTimer, jiffies +
+		  TX_ERROR_PERIOD * HZ / 1000);
+}
+
+/**
+ * et131x_link_detection_handler
+ *
+ * Timer function for link up at driver load time
+ */
+void et131x_link_detection_handler(unsigned long data)
+{
+	struct et131x_adapter *pAdapter = (struct et131x_adapter *) data;
+	unsigned long lockflags;
+
+	/* Let everyone know that we have run */
+	pAdapter->bLinkTimerActive = false;
+
+	if (pAdapter->MediaState == 0) {
+		spin_lock_irqsave(&pAdapter->Lock, lockflags);
+
+		pAdapter->MediaState = NETIF_STATUS_MEDIA_DISCONNECT;
+		MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION);
+
+		spin_unlock_irqrestore(&pAdapter->Lock, lockflags);
+
+		netif_carrier_off(pAdapter->netdev);
+
+		pAdapter->bSetPending = false;
+	}
+}
+
+/**
+ * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_adapter_setup(struct et131x_adapter *pAdapter)
+{
+	int status = 0;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Configure the JAGCore */
+	ConfigGlobalRegs(pAdapter);
+
+	ConfigMACRegs1(pAdapter);
+	ConfigMMCRegs(pAdapter);
+
+	ConfigRxMacRegs(pAdapter);
+	ConfigTxMacRegs(pAdapter);
+
+	ConfigRxDmaRegs(pAdapter);
+	ConfigTxDmaRegs(pAdapter);
+
+	ConfigMacStatRegs(pAdapter);
+
+	/* Move the following code to Timer function?? */
+	status = et131x_xcvr_find(pAdapter);
+
+	if (status != 0) {
+		DBG_WARNING(et131x_dbginfo, "Could not find the xcvr\n");
+	}
+
+	/* Prepare the TRUEPHY library. */
+	ET1310_PhyInit(pAdapter);
+
+	/* Reset the phy now so changes take place */
+	ET1310_PhyReset(pAdapter);
+
+	/* Power down PHY */
+	ET1310_PhyPowerDown(pAdapter, 1);
+
+	/*
+	 * We need to turn off 1000 base half dulplex, the mac does not
+	 * support it. For the 10/100 part, turn off all gig advertisement
+	 */
+	if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) {
+		ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+	} else {
+		ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+	}
+
+	/* Power up PHY */
+	ET1310_PhyPowerDown(pAdapter, 0);
+
+	et131x_setphy_normal(pAdapter);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_setup_hardware_properties - set up the MAC Address on the ET1310
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_setup_hardware_properties(struct et131x_adapter *adapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* If have our default mac from registry and no mac address from
+	 * EEPROM then we need to generate the last octet and set it on the
+	 * device
+	 */
+	if (!adapter->bOverrideAddress) {
+		if (adapter->PermanentAddress[0] == 0x00 &&
+		    adapter->PermanentAddress[1] == 0x00 &&
+		    adapter->PermanentAddress[2] == 0x00 &&
+		    adapter->PermanentAddress[3] == 0x00 &&
+		    adapter->PermanentAddress[4] == 0x00 &&
+		    adapter->PermanentAddress[5] == 0x00) {
+			/*
+			 * We need to randomly generate the last octet so we
+			 * decrease our chances of setting the mac address to
+			 * same as another one of our cards in the system
+			 */
+			get_random_bytes(&adapter->CurrentAddress[5], 1);
+
+			/*
+			 * We have the default value in the register we are
+			 * working with so we need to copy the current
+			 * address into the permanent address
+			 */
+			memcpy(adapter->PermanentAddress,
+			       adapter->CurrentAddress, ETH_ALEN);
+		} else {
+			/* We do not have an override address, so set the
+			 * current address to the permanent address and add
+			 * it to the device
+			 */
+			memcpy(adapter->CurrentAddress,
+			       adapter->PermanentAddress, ETH_ALEN);
+		}
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_soft_reset(struct et131x_adapter *adapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Disable MAC Core */
+	writel(0xc00f0000, &adapter->CSRAddress->mac.cfg1.value);
+
+	/* Set everything to a reset value */
+	writel(0x7F, &adapter->CSRAddress->global.sw_reset.value);
+	writel(0x000f0000, &adapter->CSRAddress->mac.cfg1.value);
+	writel(0x00000000, &adapter->CSRAddress->mac.cfg1.value);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_align_allocated_memory - Align allocated memory on a given boundary
+ * @adapter: pointer to our adapter structure
+ * @phys_addr: pointer to Physical address
+ * @offset: pointer to the offset variable
+ * @mask: correct mask
+ */
+void et131x_align_allocated_memory(struct et131x_adapter *adapter,
+				   uint64_t *phys_addr,
+				   uint64_t *offset, uint64_t mask)
+{
+	uint64_t new_addr;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	*offset = 0;
+
+	new_addr = *phys_addr & ~mask;
+
+	if (new_addr != *phys_addr) {
+		/* Move to next aligned block */
+		new_addr += mask + 1;
+		/* Return offset for adjusting virt addr */
+		*offset = new_addr - *phys_addr;
+		/* Return new physical address */
+		*phys_addr = new_addr;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_adapter_memory_alloc
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h).
+ *
+ * Allocate all the memory blocks for send, receive and others.
+ */
+int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
+{
+	int status = 0;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	do {
+		/* Allocate memory for the Tx Ring */
+		status = et131x_tx_dma_memory_alloc(adapter);
+		if (status != 0) {
+			DBG_ERROR(et131x_dbginfo,
+				  "et131x_tx_dma_memory_alloc FAILED\n");
+			break;
+		}
+
+		/* Receive buffer memory allocation */
+		status = et131x_rx_dma_memory_alloc(adapter);
+		if (status != 0) {
+			DBG_ERROR(et131x_dbginfo,
+				  "et131x_rx_dma_memory_alloc FAILED\n");
+			et131x_tx_dma_memory_free(adapter);
+			break;
+		}
+
+		/* Init receive data structures */
+		status = et131x_init_recv(adapter);
+		if (status != 0) {
+			DBG_ERROR(et131x_dbginfo, "et131x_init_recv FAILED\n");
+			et131x_tx_dma_memory_free(adapter);
+			et131x_rx_dma_memory_free(adapter);
+			break;
+		}
+	} while (0);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_adapter_memory_free(struct et131x_adapter *adapter)
+{
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Free DMA memory */
+	et131x_tx_dma_memory_free(adapter);
+	et131x_rx_dma_memory_free(adapter);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_pci_remove
+ * @pdev: a pointer to the device's pci_dev structure
+ *
+ * Registered in the pci_driver structure, this function is called when the
+ * PCI subsystem detects that a PCI device which matches the information
+ * contained in the pci_device_id table has been removed.
+ */
+void __devexit et131x_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev;
+	struct et131x_adapter *adapter;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Retrieve the net_device pointer from the pci_dev struct, as well
+	 * as the private adapter struct
+	 */
+	netdev = (struct net_device *) pci_get_drvdata(pdev);
+	adapter = netdev_priv(netdev);
+
+	/* Perform device cleanup */
+	unregister_netdev(netdev);
+	et131x_adapter_memory_free(adapter);
+	iounmap(adapter->CSRAddress);
+	free_netdev(netdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_pci_setup - Perform device initialization
+ * @pdev: a pointer to the device's pci_dev structure
+ * @ent: this device's entry in the pci_device_id table
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ *
+ * Registered in the pci_driver structure, this function is called when the
+ * PCI subsystem finds a new PCI device which matches the information
+ * contained in the pci_device_id table. This routine is the equivalent to
+ * a device insertion routine.
+ */
+int __devinit et131x_pci_setup(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
+{
+	int result = 0;
+	int pm_cap;
+	bool pci_using_dac;
+	struct net_device *netdev = NULL;
+	struct et131x_adapter *adapter = NULL;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Enable the device via the PCI subsystem */
+	result = pci_enable_device(pdev);
+	if (result != 0) {
+		DBG_ERROR(et131x_dbginfo, "pci_enable_device() failed\n");
+		goto out;
+	}
+
+	/* Perform some basic PCI checks */
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Can't find PCI device's base address\n");
+		result = -ENODEV;
+		goto out;
+	}
+
+	result = pci_request_regions(pdev, DRIVER_NAME);
+	if (result != 0) {
+		DBG_ERROR(et131x_dbginfo, "Can't get PCI resources\n");
+		goto err_disable;
+	}
+
+	/* Enable PCI bus mastering */
+	DBG_TRACE(et131x_dbginfo, "Setting PCI Bus Mastering...\n");
+	pci_set_master(pdev);
+
+	/* Query PCI for Power Mgmt Capabilities
+	 *
+	 * NOTE: Now reading PowerMgmt in another location; is this still
+	 * needed?
+	 */
+	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	if (pm_cap == 0) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Cannot find Power Management capabilities\n");
+		result = -EIO;
+		goto err_release_res;
+	}
+
+	/* Check the DMA addressing support of this device */
+	if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+		DBG_TRACE(et131x_dbginfo, "64-bit DMA addressing supported\n");
+		pci_using_dac = true;
+
+		result =
+		    pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+		if (result != 0) {
+			DBG_ERROR(et131x_dbginfo,
+				  "Unable to obtain 64 bit DMA for consistent allocations\n");
+			goto err_release_res;
+		}
+	} else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) {
+		DBG_TRACE(et131x_dbginfo,
+			  "64-bit DMA addressing NOT supported\n");
+		DBG_TRACE(et131x_dbginfo,
+			  "32-bit DMA addressing will be used\n");
+		pci_using_dac = false;
+	} else {
+		DBG_ERROR(et131x_dbginfo, "No usable DMA addressing method\n");
+		result = -EIO;
+		goto err_release_res;
+	}
+
+	/* Allocate netdev and private adapter structs */
+	DBG_TRACE(et131x_dbginfo,
+		  "Allocate netdev and private adapter structs...\n");
+	netdev = et131x_device_alloc();
+	if (netdev == NULL) {
+		DBG_ERROR(et131x_dbginfo, "Couldn't alloc netdev struct\n");
+		result = -ENOMEM;
+		goto err_release_res;
+	}
+
+	/* Setup the fundamental net_device and private adapter structure elements  */
+	DBG_TRACE(et131x_dbginfo, "Setting fundamental net_device info...\n");
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	if (pci_using_dac) {
+		//netdev->features |= NETIF_F_HIGHDMA;
+	}
+
+	/*
+	 * NOTE - Turn this on when we're ready to deal with SG-DMA
+	 *
+	 * NOTE: According to "Linux Device Drivers", 3rd ed, Rubini et al,
+	 * if checksumming is not performed in HW, then the kernel will not
+	 * use SG.
+	 * From pp 510-511:
+	 *
+	 * "Note that the kernel does not perform scatter/gather I/O to your
+	 * device if it does not also provide some form of checksumming as
+	 * well. The reason is that, if the kernel has to make a pass over a
+	 * fragmented ("nonlinear") packet to calculate the checksum, it
+	 * might as well copy the data and coalesce the packet at the same
+	 * time."
+	 *
+	 * This has been verified by setting the flags below and still not
+	 * receiving a scattered buffer from the network stack, so leave it
+	 * off until checksums are calculated in HW.
+	 */
+	//netdev->features |= NETIF_F_SG;
+	//netdev->features |= NETIF_F_NO_CSUM;
+	//netdev->features |= NETIF_F_LLTX;
+
+	/* Allocate private adapter struct and copy in relevant information */
+	adapter = netdev_priv(netdev);
+	adapter->pdev = pdev;
+	adapter->netdev = netdev;
+	adapter->VendorID = pdev->vendor;
+	adapter->DeviceID = pdev->device;
+
+	/* Do the same for the netdev struct */
+	netdev->irq = pdev->irq;
+	netdev->base_addr = pdev->resource[0].start;
+
+	/* Initialize spinlocks here */
+	DBG_TRACE(et131x_dbginfo, "Initialize spinlocks...\n");
+
+	spin_lock_init(&adapter->Lock);
+	spin_lock_init(&adapter->TCBSendQLock);
+	spin_lock_init(&adapter->TCBReadyQLock);
+	spin_lock_init(&adapter->SendHWLock);
+	spin_lock_init(&adapter->SendWaitLock);
+	spin_lock_init(&adapter->RcvLock);
+	spin_lock_init(&adapter->RcvPendLock);
+	spin_lock_init(&adapter->FbrLock);
+	spin_lock_init(&adapter->PHYLock);
+
+	/* Parse configuration parameters into the private adapter struct */
+	et131x_config_parse(adapter);
+
+	/* Find the physical adapter
+	 *
+	 * NOTE: This is the equivalent of the MpFindAdapter() routine; can we
+	 *       lump it's init with the device specific init below into a
+	 *       single init function?
+	 */
+	//while (et131x_find_adapter(adapter, pdev) != 0);
+	et131x_find_adapter(adapter, pdev);
+
+	/* Map the bus-relative registers to system virtual memory */
+	DBG_TRACE(et131x_dbginfo,
+		  "Mapping bus-relative registers to virtual memory...\n");
+
+	adapter->CSRAddress = ioremap_nocache(pci_resource_start(pdev, 0),
+					      pci_resource_len(pdev, 0));
+	if (adapter->CSRAddress == NULL) {
+		DBG_ERROR(et131x_dbginfo, "Cannot map device registers\n");
+		result = -ENOMEM;
+		goto err_free_dev;
+	}
+
+	/* Perform device-specific initialization here (See code below) */
+
+	/* If Phy COMA mode was enabled when we went down, disable it here. */
+	{
+		PM_CSR_t GlobalPmCSR = { 0 };
+
+		GlobalPmCSR.bits.pm_sysclk_gate = 1;
+		GlobalPmCSR.bits.pm_txclk_gate = 1;
+		GlobalPmCSR.bits.pm_rxclk_gate = 1;
+		writel(GlobalPmCSR.value,
+		       &adapter->CSRAddress->global.pm_csr.value);
+	}
+
+	/* Issue a global reset to the et1310 */
+	DBG_TRACE(et131x_dbginfo, "Issuing soft reset...\n");
+	et131x_soft_reset(adapter);
+
+	/* Disable all interrupts (paranoid) */
+	DBG_TRACE(et131x_dbginfo, "Disable device interrupts...\n");
+	et131x_disable_interrupts(adapter);
+
+	/* Allocate DMA memory */
+	result = et131x_adapter_memory_alloc(adapter);
+	if (result != 0) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Could not alloc adapater memory (DMA)\n");
+		goto err_iounmap;
+	}
+
+	/* Init send data structures */
+	DBG_TRACE(et131x_dbginfo, "Init send data structures...\n");
+	et131x_init_send(adapter);
+
+	adapter->PoMgmt.PowerState = NdisDeviceStateD0;
+
+	/* Register the interrupt
+	 *
+	 * NOTE - This is being done in the open routine, where most other
+	 *         Linux drivers setup IRQ handlers. Make sure device
+	 *         interrupts are not turned on before the IRQ is registered!!
+	 *
+	 *         What we will do here is setup the task structure for the
+	 *         ISR's deferred handler
+	 */
+	INIT_WORK(&adapter->task, et131x_isr_handler);
+
+	/* Determine MAC Address, and copy into the net_device struct */
+	DBG_TRACE(et131x_dbginfo, "Retrieve MAC address...\n");
+	et131x_setup_hardware_properties(adapter);
+
+	memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
+
+	/* Setup et1310 as per the documentation */
+	DBG_TRACE(et131x_dbginfo, "Setup the adapter...\n");
+	et131x_adapter_setup(adapter);
+
+	/* Create a timer to count errors received by the NIC */
+	init_timer(&adapter->ErrorTimer);
+
+	adapter->ErrorTimer.expires = jiffies + TX_ERROR_PERIOD * HZ / 1000;
+	adapter->ErrorTimer.function = et131x_error_timer_handler;
+	adapter->ErrorTimer.data = (unsigned long)adapter;
+
+	/* Initialize link state */
+	et131x_link_detection_handler((unsigned long)adapter);
+
+	/* Intialize variable for counting how long we do not have link status */
+	adapter->PoMgmt.TransPhyComaModeOnBoot = 0;
+
+	/* We can enable interrupts now
+	 *
+	 *  NOTE - Because registration of interrupt handler is done in the
+	 *         device's open(), defer enabling device interrupts to that
+	 *         point
+	 */
+
+	/* Register the net_device struct with the Linux network layer */
+	DBG_TRACE(et131x_dbginfo, "Registering net_device...\n");
+	if ((result = register_netdev(netdev)) != 0) {
+		DBG_ERROR(et131x_dbginfo, "register_netdev() failed\n");
+		goto err_mem_free;
+	}
+
+	/* Register the net_device struct with the PCI subsystem. Save a copy
+	 * of the PCI config space for this device now that the device has
+	 * been initialized, just in case it needs to be quickly restored.
+	 */
+	pci_set_drvdata(pdev, netdev);
+
+	pci_save_state(adapter->pdev);
+
+out:
+	DBG_LEAVE(et131x_dbginfo);
+	return result;
+
+err_mem_free:
+	et131x_adapter_memory_free(adapter);
+err_iounmap:
+	iounmap(adapter->CSRAddress);
+err_free_dev:
+	free_netdev(netdev);
+err_release_res:
+	pci_release_regions(pdev);
+err_disable:
+	pci_disable_device(pdev);
+	goto out;
+}

drivers/staging/et131x/et131x_initpci.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_initpci.h - Header which includes common data and function prototypes
+ *                    related to the driver's PCI (and PCI Express) information.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_INITPCI_H__
+#define __ET131X_INITPCI_H__
+
+/* Function Prototypes */
+void et131x_align_allocated_memory(struct et131x_adapter *adapter,
+				   u64 *phys_addr,
+				   u64 *offset, u64 mask);
+
+int et131x_adapter_setup(struct et131x_adapter *adapter);
+int et131x_adapter_memory_alloc(struct et131x_adapter *adapter);
+void et131x_adapter_memory_free(struct et131x_adapter *adapter);
+void et131x_setup_hardware_properties(struct et131x_adapter *adapter);
+void et131x_soft_reset(struct et131x_adapter *adapter);
+
+#endif /* __ET131X_INITPCI_H__ */

drivers/staging/et131x/et131x_isr.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_isr.c - File which contains the ISR, ISR handler, and related routines
+ *                for processing interrupts from the device.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+
+#include "et131x_adapter.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * et131x_isr - The Interrupt Service Routine for the driver.
+ * @irq: the IRQ on which the interrupt was received.
+ * @dev_id: device-specific info (here a pointer to a net_device struct)
+ *
+ * Returns a value indicating if the interrupt was handled.
+ */
+irqreturn_t et131x_isr(int irq, void *dev_id)
+{
+	bool handled = true;
+	struct net_device *netdev = (struct net_device *)dev_id;
+	struct et131x_adapter *adapter = NULL;
+	INTERRUPT_t status;
+
+	if (netdev == NULL || !netif_device_present(netdev)) {
+		DBG_WARNING(et131x_dbginfo,
+			    "No net_device struct or device not present\n");
+		handled = false;
+		goto out;
+	}
+
+	adapter = netdev_priv(netdev);
+
+	/* If the adapter is in low power state, then it should not
+	 * recognize any interrupt
+	 */
+
+	/* Disable Device Interrupts */
+	et131x_disable_interrupts(adapter);
+
+	/* Get a copy of the value in the interrupt status register
+	 * so we can process the interrupting section
+	 */
+	status.value = readl(&adapter->CSRAddress->global.int_status.value);
+
+	if (adapter->FlowControl == TxOnly ||
+	    adapter->FlowControl == Both) {
+		status.value &= ~INT_MASK_ENABLE;
+	} else {
+		status.value &= ~INT_MASK_ENABLE_NO_FLOW;
+	}
+
+	/* Make sure this is our interrupt */
+	if (!status.value) {
+#ifdef CONFIG_ET131X_DEBUG
+		adapter->Stats.UnhandledInterruptsPerSec++;
+#endif
+		handled = false;
+		DBG_VERBOSE(et131x_dbginfo, "NOT OUR INTERRUPT\n");
+		et131x_enable_interrupts(adapter);
+		goto out;
+	}
+
+	/* This is our interrupt, so process accordingly */
+#ifdef CONFIG_ET131X_DEBUG
+	if (status.bits.rxdma_xfr_done) {
+		adapter->Stats.RxDmaInterruptsPerSec++;
+	}
+
+	if (status.bits.txdma_isr) {
+		adapter->Stats.TxDmaInterruptsPerSec++;
+	}
+#endif
+
+	if (status.bits.watchdog_interrupt) {
+		PMP_TCB pMpTcb = adapter->TxRing.CurrSendHead;
+
+		if (pMpTcb) {
+			if (++pMpTcb->PacketStaleCount > 1) {
+				status.bits.txdma_isr = 1;
+			}
+		}
+
+		if (adapter->RxRing.UnfinishedReceives) {
+			status.bits.rxdma_xfr_done = 1;
+		} else if (pMpTcb == NULL) {
+			writel(0, &adapter->CSRAddress->global.watchdog_timer);
+		}
+
+		status.bits.watchdog_interrupt = 0;
+#ifdef CONFIG_ET131X_DEBUG
+		adapter->Stats.WatchDogInterruptsPerSec++;
+#endif
+	}
+
+	if (status.value == 0) {
+		/* This interrupt has in some way been "handled" by
+		 * the ISR. Either it was a spurious Rx interrupt, or
+		 * it was a Tx interrupt that has been filtered by
+		 * the ISR.
+		 */
+		et131x_enable_interrupts(adapter);
+		goto out;
+	}
+
+	/* We need to save the interrupt status value for use in our
+	 * DPC. We will clear the software copy of that in that
+	 * routine.
+	 */
+	adapter->Stats.InterruptStatus = status;
+
+	/* Schedule the ISR handler as a bottom-half task in the
+	 * kernel's tq_immediate queue, and mark the queue for
+	 * execution
+	 */
+	schedule_work(&adapter->task);
+
+out:
+	return IRQ_RETVAL(handled);
+}
+
+/**
+ * et131x_isr_handler - The ISR handler
+ * @p_adapter, a pointer to the device's private adapter structure
+ *
+ * scheduled to run in a deferred context by the ISR. This is where the ISR's
+ * work actually gets done.
+ */
+void et131x_isr_handler(struct work_struct *work)
+{
+	struct et131x_adapter *pAdapter =
+		container_of(work, struct et131x_adapter, task);
+	INTERRUPT_t GlobStatus = pAdapter->Stats.InterruptStatus;
+	ADDRESS_MAP_t __iomem *iomem = pAdapter->CSRAddress;
+
+	/*
+	 * These first two are by far the most common.  Once handled, we clear
+	 * their two bits in the status word.  If the word is now zero, we
+	 * exit.
+	 */
+	/* Handle all the completed Transmit interrupts */
+	if (GlobStatus.bits.txdma_isr) {
+		DBG_TX(et131x_dbginfo, "TXDMA_ISR interrupt\n");
+		et131x_handle_send_interrupt(pAdapter);
+	}
+
+	/* Handle all the completed Receives interrupts */
+	if (GlobStatus.bits.rxdma_xfr_done) {
+		DBG_RX(et131x_dbginfo, "RXDMA_XFR_DONE interrupt\n");
+		et131x_handle_recv_interrupt(pAdapter);
+	}
+
+	GlobStatus.value &= 0xffffffd7;
+
+	if (GlobStatus.value) {
+		/* Handle the TXDMA Error interrupt */
+		if (GlobStatus.bits.txdma_err) {
+			TXDMA_ERROR_t TxDmaErr;
+
+			/* Following read also clears the register (COR) */
+			TxDmaErr.value = readl(&iomem->txdma.TxDmaError.value);
+
+			DBG_WARNING(et131x_dbginfo,
+				    "TXDMA_ERR interrupt, error = %d\n",
+				    TxDmaErr.value);
+		}
+
+		/* Handle Free Buffer Ring 0 and 1 Low interrupt */
+		if (GlobStatus.bits.rxdma_fb_ring0_low ||
+		    GlobStatus.bits.rxdma_fb_ring1_low) {
+			/*
+			 * This indicates the number of unused buffers in
+			 * RXDMA free buffer ring 0 is <= the limit you
+			 * programmed. Free buffer resources need to be
+			 * returned.  Free buffers are consumed as packets
+			 * are passed from the network to the host. The host
+			 * becomes aware of the packets from the contents of
+			 * the packet status ring. This ring is queried when
+			 * the packet done interrupt occurs. Packets are then
+			 * passed to the OS. When the OS is done with the
+			 * packets the resources can be returned to the
+			 * ET1310 for re-use. This interrupt is one method of
+			 * returning resources.
+			 */
+			DBG_WARNING(et131x_dbginfo,
+				    "RXDMA_FB_RING0_LOW or "
+				    "RXDMA_FB_RING1_LOW interrupt\n");
+
+			/* If the user has flow control on, then we will
+			 * send a pause packet, otherwise just exit
+			 */
+			if (pAdapter->FlowControl == TxOnly ||
+			    pAdapter->FlowControl == Both) {
+				PM_CSR_t pm_csr;
+
+				/* Tell the device to send a pause packet via
+				 * the back pressure register
+				 */
+				pm_csr.value = readl(&iomem->global.pm_csr.value);
+				if (pm_csr.bits.pm_phy_sw_coma == 0) {
+					TXMAC_BP_CTRL_t bp_ctrl = { 0 };
+
+					bp_ctrl.bits.bp_req = 1;
+					bp_ctrl.bits.bp_xonxoff = 1;
+					writel(bp_ctrl.value,
+					       &iomem->txmac.bp_ctrl.value);
+				}
+			}
+		}
+
+		/* Handle Packet Status Ring Low Interrupt */
+		if (GlobStatus.bits.rxdma_pkt_stat_ring_low) {
+			DBG_WARNING(et131x_dbginfo,
+				    "RXDMA_PKT_STAT_RING_LOW interrupt\n");
+
+			/*
+			 * Same idea as with the two Free Buffer Rings.
+			 * Packets going from the network to the host each
+			 * consume a free buffer resource and a packet status
+			 * resource.  These resoures are passed to the OS.
+			 * When the OS is done with the resources, they need
+			 * to be returned to the ET1310. This is one method
+			 * of returning the resources.
+			 */
+		}
+
+		/* Handle RXDMA Error Interrupt */
+		if (GlobStatus.bits.rxdma_err) {
+			/*
+			 * The rxdma_error interrupt is sent when a time-out
+			 * on a request issued by the JAGCore has occurred or
+			 * a completion is returned with an un-successful
+			 * status.  In both cases the request is considered
+			 * complete. The JAGCore will automatically re-try the
+			 * request in question. Normally information on events
+			 * like these are sent to the host using the "Advanced
+			 * Error Reporting" capability. This interrupt is
+			 * another way of getting similar information. The
+			 * only thing required is to clear the interrupt by
+			 * reading the ISR in the global resources. The
+			 * JAGCore will do a re-try on the request.  Normally
+			 * you should never see this interrupt. If you start
+			 * to see this interrupt occurring frequently then
+			 * something bad has occurred. A reset might be the
+			 * thing to do.
+			 */
+			// TRAP();
+
+			pAdapter->TxMacTest.value =
+				readl(&iomem->txmac.tx_test.value);
+			DBG_WARNING(et131x_dbginfo,
+				    "RxDMA_ERR interrupt, error %x\n",
+				    pAdapter->TxMacTest.value);
+		}
+
+		/* Handle the Wake on LAN Event */
+		if (GlobStatus.bits.wake_on_lan) {
+			/*
+			 * This is a secondary interrupt for wake on LAN.
+			 * The driver should never see this, if it does,
+			 * something serious is wrong. We will TRAP the
+			 * message when we are in DBG mode, otherwise we
+			 * will ignore it.
+			 */
+			DBG_ERROR(et131x_dbginfo, "WAKE_ON_LAN interrupt\n");
+		}
+
+		/* Handle the PHY interrupt */
+		if (GlobStatus.bits.phy_interrupt) {
+			PM_CSR_t pm_csr;
+			MI_BMSR_t BmsrInts, BmsrData;
+			MI_ISR_t myIsr;
+
+			DBG_VERBOSE(et131x_dbginfo, "PHY interrupt\n");
+
+			/* If we are in coma mode when we get this interrupt,
+			 * we need to disable it.
+			 */
+			pm_csr.value = readl(&iomem->global.pm_csr.value);
+			if (pm_csr.bits.pm_phy_sw_coma == 1) {
+				/*
+				 * Check to see if we are in coma mode and if
+				 * so, disable it because we will not be able
+				 * to read PHY values until we are out.
+				 */
+				DBG_VERBOSE(et131x_dbginfo,
+					    "Device is in COMA mode, "
+					    "need to wake up\n");
+				DisablePhyComa(pAdapter);
+			}
+
+			/* Read the PHY ISR to clear the reason for the
+			 * interrupt.
+			 */
+			MiRead(pAdapter, (uint8_t) offsetof(MI_REGS_t, isr),
+			       &myIsr.value);
+
+			if (!pAdapter->ReplicaPhyLoopbk) {
+				MiRead(pAdapter,
+				       (uint8_t) offsetof(MI_REGS_t, bmsr),
+				       &BmsrData.value);
+
+				BmsrInts.value =
+				    pAdapter->Bmsr.value ^ BmsrData.value;
+				pAdapter->Bmsr.value = BmsrData.value;
+
+				DBG_VERBOSE(et131x_dbginfo,
+					    "Bmsr.value = 0x%04x,"
+					    "Bmsr_ints.value = 0x%04x\n",
+					    BmsrData.value, BmsrInts.value);
+
+				/* Do all the cable in / cable out stuff */
+				et131x_Mii_check(pAdapter, BmsrData, BmsrInts);
+			}
+		}
+
+		/* Let's move on to the TxMac */
+		if (GlobStatus.bits.txmac_interrupt) {
+			pAdapter->TxRing.TxMacErr.value =
+				readl(&iomem->txmac.err.value);
+
+			/*
+			 * When any of the errors occur and TXMAC generates
+			 * an interrupt to report these errors, it usually
+			 * means that TXMAC has detected an error in the data
+			 * stream retrieved from the on-chip Tx Q. All of
+			 * these errors are catastrophic and TXMAC won't be
+			 * able to recover data when these errors occur.  In
+			 * a nutshell, the whole Tx path will have to be reset
+			 * and re-configured afterwards.
+			 */
+			DBG_WARNING(et131x_dbginfo,
+				    "TXMAC interrupt, error 0x%08x\n",
+				    pAdapter->TxRing.TxMacErr.value);
+
+			/* If we are debugging, we want to see this error,
+			 * otherwise we just want the device to be reset and
+			 * continue
+			 */
+			//DBG_TRAP();
+		}
+
+		/* Handle RXMAC Interrupt */
+		if (GlobStatus.bits.rxmac_interrupt) {
+			/*
+			 * These interrupts are catastrophic to the device,
+			 * what we need to do is disable the interrupts and
+			 * set the flag to cause us to reset so we can solve
+			 * this issue.
+			 */
+			// MP_SET_FLAG( pAdapter, fMP_ADAPTER_HARDWARE_ERROR );
+
+			DBG_WARNING(et131x_dbginfo,
+				    "RXMAC interrupt, error 0x%08x.  Requesting reset\n",
+				    readl(&iomem->rxmac.err_reg.value));
+
+			DBG_WARNING(et131x_dbginfo,
+				    "Enable 0x%08x, Diag 0x%08x\n",
+				    readl(&iomem->rxmac.ctrl.value),
+				    readl(&iomem->rxmac.rxq_diag.value));
+
+			/*
+			 * If we are debugging, we want to see this error,
+			 * otherwise we just want the device to be reset and
+			 * continue
+			 */
+			// TRAP();
+		}
+
+		/* Handle MAC_STAT Interrupt */
+		if (GlobStatus.bits.mac_stat_interrupt) {
+			/*
+			 * This means at least one of the un-masked counters
+			 * in the MAC_STAT block has rolled over.  Use this
+			 * to maintain the top, software managed bits of the
+			 * counter(s).
+			 */
+			DBG_VERBOSE(et131x_dbginfo, "MAC_STAT interrupt\n");
+			HandleMacStatInterrupt(pAdapter);
+		}
+
+		/* Handle SLV Timeout Interrupt */
+		if (GlobStatus.bits.slv_timeout) {
+			/*
+			 * This means a timeout has occured on a read or
+			 * write request to one of the JAGCore registers. The
+			 * Global Resources block has terminated the request
+			 * and on a read request, returned a "fake" value.
+			 * The most likely reasons are: Bad Address or the
+			 * addressed module is in a power-down state and
+			 * can't respond.
+			 */
+			DBG_VERBOSE(et131x_dbginfo, "SLV_TIMEOUT interrupt\n");
+		}
+	}
+
+	if (pAdapter->PoMgmt.PowerState == NdisDeviceStateD0) {
+		et131x_enable_interrupts(pAdapter);
+	}
+}

drivers/staging/et131x/et131x_isr.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_isr.h - Defines, structs, enums, prototypes, etc. pertaining to the
+ *                ISR processing code.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_ISR_H__
+#define __ET131X_ISR_H__
+
+irqreturn_t et131x_isr(int irq, void *dev_id);
+void et131x_isr_handler(struct work_struct *work);
+
+#endif /* __ET131X_ISR_H__ */

drivers/staging/et131x/et131x_netdev.c

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_netdev.c - Routines and data required by all Linux network devices.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright  2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+#include "et1310_tx.h"
+
+#include "et131x_adapter.h"
+#include "et131x_isr.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+struct net_device_stats *et131x_stats(struct net_device *netdev);
+int et131x_open(struct net_device *netdev);
+int et131x_close(struct net_device *netdev);
+int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd);
+void et131x_multicast(struct net_device *netdev);
+int et131x_tx(struct sk_buff *skb, struct net_device *netdev);
+void et131x_tx_timeout(struct net_device *netdev);
+int et131x_change_mtu(struct net_device *netdev, int new_mtu);
+int et131x_set_mac_addr(struct net_device *netdev, void *new_mac);
+void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
+void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+
+/**
+ * et131x_device_alloc
+ *
+ * Returns pointer to the allocated and initialized net_device struct for
+ * this device.
+ *
+ * Create instances of net_device and wl_private for the new adapter and
+ * register the device's entry points in the net_device structure.
+ */
+struct net_device *et131x_device_alloc(void)
+{
+	struct net_device *netdev;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Alloc net_device and adapter structs */
+	netdev = alloc_etherdev(sizeof(struct et131x_adapter));
+
+	if (netdev == NULL) {
+		DBG_ERROR(et131x_dbginfo,
+			  "Alloc of net_device struct failed\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return NULL;
+	}
+
+	/* Setup the function registration table (and other data) for a
+	 * net_device
+	 */
+	//netdev->init               = &et131x_init;
+	//netdev->set_config = &et131x_config;
+	netdev->get_stats = &et131x_stats;
+	netdev->open = &et131x_open;
+	netdev->stop = &et131x_close;
+	netdev->do_ioctl = &et131x_ioctl;
+	netdev->set_multicast_list = &et131x_multicast;
+	netdev->hard_start_xmit = &et131x_tx;
+	netdev->tx_timeout = &et131x_tx_timeout;
+	netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
+	netdev->change_mtu = &et131x_change_mtu;
+	netdev->set_mac_address = &et131x_set_mac_addr;
+
+	//netdev->ethtool_ops        = &et131x_ethtool_ops;
+
+	// Poll?
+	//netdev->poll               = &et131x_poll;
+	//netdev->poll_controller    = &et131x_poll_controller;
+
+	DBG_LEAVE(et131x_dbginfo);
+	return netdev;
+}
+
+/**
+ * et131x_stats - Return the current device statistics.
+ * @netdev: device whose stats are being queried
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+struct net_device_stats *et131x_stats(struct net_device *netdev)
+{
+	struct et131x_adapter *adapter = netdev_priv(netdev);
+	struct net_device_stats *stats = &adapter->net_stats;
+	CE_STATS_t *devstat = &adapter->Stats;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	stats->rx_packets = devstat->ipackets;
+	stats->tx_packets = devstat->opackets;
+	stats->rx_errors = devstat->length_err + devstat->alignment_err +
+	    devstat->crc_err + devstat->code_violations + devstat->other_errors;
+	stats->tx_errors = devstat->max_pkt_error;
+	stats->multicast = devstat->multircv;
+	stats->collisions = devstat->collisions;
+
+	stats->rx_length_errors = devstat->length_err;
+	stats->rx_over_errors = devstat->rx_ov_flow;
+	stats->rx_crc_errors = devstat->crc_err;
+
+	// NOTE: These stats don't have corresponding values in CE_STATS, so we're
+	//       going to have to update these directly from within the TX/RX code
+	//stats->rx_bytes            = 20; //devstat->;
+	//stats->tx_bytes            = 20; //devstat->;
+	//stats->rx_dropped          = devstat->;
+	//stats->tx_dropped          = devstat->;
+
+	// NOTE: Not used, can't find analogous statistics
+	//stats->rx_frame_errors     = devstat->;
+	//stats->rx_fifo_errors      = devstat->;
+	//stats->rx_missed_errors    = devstat->;
+
+	//stats->tx_aborted_errors   = devstat->;
+	//stats->tx_carrier_errors   = devstat->;
+	//stats->tx_fifo_errors      = devstat->;
+	//stats->tx_heartbeat_errors = devstat->;
+	//stats->tx_window_errors    = devstat->;
+
+	DBG_LEAVE(et131x_dbginfo);
+	return stats;
+}
+
+/**
+ * et131x_open - Open the device for use.
+ * @netdev: device to be opened
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_open(struct net_device *netdev)
+{
+	int result = 0;
+	struct et131x_adapter *adapter = netdev_priv(netdev);
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Start the timer to track NIC errors */
+	add_timer(&adapter->ErrorTimer);
+
+	/* Register our ISR */
+	DBG_TRACE(et131x_dbginfo, "Registering ISR...\n");
+
+	result =
+	    request_irq(netdev->irq, et131x_isr, IRQF_SHARED, netdev->name,
+			netdev);
+	if (result) {
+		DBG_ERROR(et131x_dbginfo, "Could not register ISR\n");
+		DBG_LEAVE(et131x_dbginfo);
+		return result;
+	}
+
+	/* Enable the Tx and Rx DMA engines (if not already enabled) */
+	et131x_rx_dma_enable(adapter);
+	et131x_tx_dma_enable(adapter);
+
+	/* Enable device interrupts */
+	et131x_enable_interrupts(adapter);
+
+	MP_SET_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE);
+
+	/* We're ready to move some data, so start the queue */
+	netif_start_queue(netdev);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return result;
+}
+
+/**
+ * et131x_close - Close the device
+ * @netdev: device to be closed
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_close(struct net_device *netdev)
+{
+	struct et131x_adapter *adapter = netdev_priv(netdev);
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* First thing is to stop the queue */
+	netif_stop_queue(netdev);
+
+	/* Stop the Tx and Rx DMA engines */
+	et131x_rx_dma_disable(adapter);
+	et131x_tx_dma_disable(adapter);
+
+	/* Disable device interrupts */
+	et131x_disable_interrupts(adapter);
+
+	/* Deregistering ISR */
+	MP_CLEAR_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE);
+
+	DBG_TRACE(et131x_dbginfo, "Deregistering ISR...\n");
+	free_irq(netdev->irq, netdev);
+
+	/* Stop the error timer */
+	del_timer_sync(&adapter->ErrorTimer);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return 0;
+}
+
+/**
+ * et131x_ioctl_mii - The function which handles MII IOCTLs
+ * @netdev: device on which the query is being made
+ * @reqbuf: the request-specific data buffer
+ * @cmd: the command request code
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
+{
+	int status = 0;
+	struct et131x_adapter *pAdapter = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(reqbuf);
+
+	DBG_ENTER(et131x_dbginfo);
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIPHY\n");
+		data->phy_id = pAdapter->Stats.xcvr_addr;
+		break;
+
+	case SIOCGMIIREG:
+		DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIREG\n");
+		if (!capable(CAP_NET_ADMIN)) {
+			status = -EPERM;
+		} else {
+			status = MiRead(pAdapter,
+					data->reg_num, &data->val_out);
+		}
+		break;
+
+	case SIOCSMIIREG:
+		DBG_VERBOSE(et131x_dbginfo, "SIOCSMIIREG\n");
+		if (!capable(CAP_NET_ADMIN)) {
+			status = -EPERM;
+		} else {
+			status = MiWrite(pAdapter, data->reg_num,
+					 data->val_in);
+		}
+		break;
+
+	default:
+		status = -EOPNOTSUPP;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_ioctl - The I/O Control handler for the driver
+ * @netdev: device on which the control request is being made
+ * @reqbuf: a pointer to the IOCTL request buffer
+ * @cmd: the IOCTL command code
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
+{
+	int status = 0;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		status = et131x_ioctl_mii(netdev, reqbuf, cmd);
+		break;
+
+	default:
+		DBG_WARNING(et131x_dbginfo, "Unhandled IOCTL Code: 0x%04x\n",
+			    cmd);
+		status = -EOPNOTSUPP;
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_set_packet_filter - Configures the Rx Packet filtering on the device
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure
+ */
+int et131x_set_packet_filter(struct et131x_adapter *adapter)
+{
+	int status = 0;
+	uint32_t filter = adapter->PacketFilter;
+	RXMAC_CTRL_t ctrl;
+	RXMAC_PF_CTRL_t pf_ctrl;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	ctrl.value = readl(&adapter->CSRAddress->rxmac.ctrl.value);
+	pf_ctrl.value = readl(&adapter->CSRAddress->rxmac.pf_ctrl.value);
+
+	/* Default to disabled packet filtering.  Enable it in the individual
+	 * case statements that require the device to filter something
+	 */
+	ctrl.bits.pkt_filter_disable = 1;
+
+	/* Set us to be in promiscuous mode so we receive everything, this
+	 * is also true when we get a packet filter of 0
+	 */
+	if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0) {
+		pf_ctrl.bits.filter_broad_en = 0;
+		pf_ctrl.bits.filter_multi_en = 0;
+		pf_ctrl.bits.filter_uni_en = 0;
+	} else {
+		/*
+		 * Set us up with Multicast packet filtering.  Three cases are
+		 * possible - (1) we have a multi-cast list, (2) we receive ALL
+		 * multicast entries or (3) we receive none.
+		 */
+		if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
+			DBG_VERBOSE(et131x_dbginfo,
+				    "Multicast filtering OFF (Rx ALL MULTICAST)\n");
+			pf_ctrl.bits.filter_multi_en = 0;
+		} else {
+			DBG_VERBOSE(et131x_dbginfo, "Multicast filtering ON\n");
+			SetupDeviceForMulticast(adapter);
+			pf_ctrl.bits.filter_multi_en = 1;
+			ctrl.bits.pkt_filter_disable = 0;
+		}
+
+		/* Set us up with Unicast packet filtering */
+		if (filter & ET131X_PACKET_TYPE_DIRECTED) {
+			DBG_VERBOSE(et131x_dbginfo, "Unicast Filtering ON\n");
+			SetupDeviceForUnicast(adapter);
+			pf_ctrl.bits.filter_uni_en = 1;
+			ctrl.bits.pkt_filter_disable = 0;
+		}
+
+		/* Set us up with Broadcast packet filtering */
+		if (filter & ET131X_PACKET_TYPE_BROADCAST) {
+			DBG_VERBOSE(et131x_dbginfo, "Broadcast Filtering ON\n");
+			pf_ctrl.bits.filter_broad_en = 1;
+			ctrl.bits.pkt_filter_disable = 0;
+		} else {
+			DBG_VERBOSE(et131x_dbginfo,
+				    "Broadcast Filtering OFF\n");
+			pf_ctrl.bits.filter_broad_en = 0;
+		}
+
+		/* Setup the receive mac configuration registers - Packet
+		 * Filter control + the enable / disable for packet filter
+		 * in the control reg.
+		 */
+		writel(pf_ctrl.value,
+		       &adapter->CSRAddress->rxmac.pf_ctrl.value);
+		writel(ctrl.value, &adapter->CSRAddress->rxmac.ctrl.value);
+	}
+
+	DBG_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_multicast - The handler to configure multicasting on the interface
+ * @netdev: a pointer to a net_device struct representing the device
+ */
+void et131x_multicast(struct net_device *netdev)
+{
+	struct et131x_adapter *adapter = netdev_priv(netdev);
+	uint32_t PacketFilter = 0;
+	uint32_t count;
+	unsigned long lockflags;
+	struct dev_mc_list *mclist = netdev->mc_list;
+
+	DBG_ENTER(et131x_dbginfo);
+
+	spin_lock_irqsave(&adapter->Lock, lockflags);
+
+	/* Before we modify the platform-independent filter flags, store them
+	 * locally. This allows us to determine if anything's changed and if
+	 * we even need to bother the hardware
+	 */
+	PacketFilter = adapter->PacketFilter;
+
+	/* Clear the 'multicast' flag locally; becuase we only have a single
+	 * flag to check multicast, and multiple multicast addresses can be
+	 * set, this is the easiest way to determine if more than one
+	 * multicast address is being set.
+	 */
+	PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
+
+	/* Check the net_device flags and set the device independent flags
+	 * accordingly
+	 */
+	DBG_VERBOSE(et131x_dbginfo,
+		    "MULTICAST ADDR COUNT: %d\n", netdev->mc_count);
+
+	if (netdev->flags & IFF_PROMISC) {
+		DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE ON\n");
+		adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS;
+	} else {
+		DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE OFF\n");
+		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS;
+	}
+
+	if (netdev->flags & IFF_ALLMULTI) {
+		DBG_VERBOSE(et131x_dbginfo, "Request: ACCEPT ALL MULTICAST\n");
+		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
+	}
+
+	if (netdev->mc_count > NIC_MAX_MCAST_LIST) {
+		DBG_WARNING(et131x_dbginfo,
+			    "ACCEPT ALL MULTICAST for now, as there's more Multicast "
+			    "addresses than the HW supports\n");
+
+		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
+	}
+
+	if (netdev->mc_count < 1) {
+		DBG_VERBOSE(et131x_dbginfo, "Request: REJECT ALL MULTICAST\n");
+		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
+		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
+	} else {
+		DBG_VERBOSE(et131x_dbginfo,
+			    "Request: SET MULTICAST FILTER(S)\n");
+		adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST;
+	}
+
+	/* Set values in the private adapter struct */
+	adapter->MCAddressCount = netdev->mc_count;
+
+	if (netdev->mc_count) {
+		if (mclist->dmi_addrlen != ETH_ALEN) {
+			DBG_WARNING(et131x_dbginfo,
+				    "Multicast addrs are not ETH_ALEN in size\n");
+		} else {
+			count = netdev->mc_count - 1;
+			memcpy(adapter->MCList[count], mclist->dmi_addr,
+			       ETH_ALEN);
+		}
+	}
+
+	/* Are the new flags different from the previous ones? If not, then no
+	 * action is required
+	 *
+	 * NOTE - This block will always update the MCList with the hardware,
+	 *        even if the addresses aren't the same.
+	 */
+	if (PacketFilter != adapter->PacketFilter) {
+		/* Call the device's filter function */
+		DBG_VERBOSE(et131x_dbginfo, "UPDATE REQUIRED, FLAGS changed\n");
+
+		et131x_set_packet_filter(adapter);
+	} else {
+		DBG_VERBOSE(et131x_dbginfo,
+			    "NO UPDATE REQUIRED, FLAGS didn't change\n");
+	}
+
+	spin_unlock_irqrestore(&adapter->Lock, lockflags);
+
+	DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_tx - The handler to tx a packet on the device
+ * @skb: data to be Tx'd
+ * @netdev: device on which data is to be Tx'd
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
+{
+	int status = 0;
+
+	DBG_TX_ENTER(et131x_dbginfo);
+
+	/* Save the timestamp for the TX timeout watchdog */
+	netdev->trans_start = jiffies;
+
+	/* Call the device-specific data Tx routine */
+	status = et131x_send_packets(skb, netdev);
+
+	/* Check status and manage the netif queue if necessary */
+	if (status != 0) {
+		if (status == -ENOMEM) {
+			DBG_VERBOSE(et131x_dbginfo,
+				    "OUT OF TCBs; STOP NETIF QUEUE\n");
+
+			/* Put the queue to sleep until resources are
+			 * available
+			 */
+			netif_stop_queue(netdev);
+			status = 1;
+		} else {
+			DBG_WARNING(et131x_dbginfo,
+				    "Misc error; drop packet\n");
+			status = 0;
+		}
+	}
+
+	DBG_TX_LEAVE(et131x_dbginfo);
+	return status;
+}
+
+/**
+ * et131x_tx_timeout - Timeout handler
+ * @netdev: a pointer to a net_device struct representing the device
+ *
+ * The handler called when a Tx request times out. The timeout period is
+ * specified by the 'tx_timeo" element in the net_device structure (see
+ * et131x_alloc_device() to see how this value is set).
+ */
+void et131x_tx_timeout(struct net_device *netdev)
+{
+	struct et131x_adapter *pAdapter = netdev_priv(netdev);
+	PMP_TCB pMpTcb;
+	unsigned long lockflags;
+
+	DBG_WARNING(et131x_dbginfo, "TX TIMEOUT\n");
+
+	/* Just skip this part if the adapter is doing link detection */
+	if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION)) {
+		DBG_ERROR(et131x_dbginfo, "Still doing link detection\n");
+		return;
+	}
+
+	/* Any nonrecoverable hardware error?
+	 * Checks adapter->flags for any failure in phy reading
+	 */
+	if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_NON_RECOVER_ERROR)) {
+		DBG_WARNING(et131x_dbginfo, "Non recoverable error - remove\n");
+		return;
+	}
+
+	/* Hardware failure? */
+	if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_HARDWARE_ERROR)) {
+		DBG_WARNING(et131x_dbginfo, "hardware error - reset\n");
+		return;
+	}
+
+	/* Is send stuck? */
+	spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+	pMpTcb = pAdapter->TxRing.CurrSendHead;
+
+	if (pMpTcb != NULL) {
+		pMpTcb->Count++;
+
+		if (pMpTcb->Count > NIC_SEND_HANG_THRESHOLD) {
+#ifdef CONFIG_ET131X_DEBUG
+			TX_STATUS_BLOCK_t txDmaComplete =
+			    *(pAdapter->TxRing.pTxStatusVa);
+			PTX_DESC_ENTRY_t pDesc =
+			    pAdapter->TxRing.pTxDescRingVa +
+			    pMpTcb->WrIndex.bits.val;
+#endif
+			TX_DESC_ENTRY_t StuckDescriptors[10];
+
+			if (pMpTcb->WrIndex.bits.val > 7) {
+				memcpy(StuckDescriptors,
+				       pAdapter->TxRing.pTxDescRingVa +
+				       pMpTcb->WrIndex.bits.val - 6,
+				       sizeof(TX_DESC_ENTRY_t) * 10);
+			}
+
+			spin_unlock_irqrestore(&pAdapter->TCBSendQLock,
+					       lockflags);
+
+			DBG_WARNING(et131x_dbginfo,
+				    "Send stuck - reset.  pMpTcb->WrIndex %x, Flags 0x%08x\n",
+				    pMpTcb->WrIndex.bits.val,
+				    pMpTcb->Flags);
+
+			DBG_WARNING(et131x_dbginfo,
+				    "pDesc 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
+				    pDesc->DataBufferPtrHigh,
+				    pDesc->DataBufferPtrLow, pDesc->word2.value,
+				    pDesc->word3.value);
+
+			DBG_WARNING(et131x_dbginfo,
+				    "WbStatus 0x%08x\n", txDmaComplete.value);
+
+#ifdef CONFIG_ET131X_DEBUG
+			DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 0);
+			DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 1);
+			DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 3);
+			DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 5);
+#endif
+			et131x_close(netdev);
+			et131x_open(netdev);
+
+			return;
+		}
+	}
+
+	spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+}
+
+/**
+ * et131x_change_mtu - The handler called to change the MTU for the device
+ * @netdev: device whose MTU is to be changed
+ * @new_mtu: the desired MTU
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	int result = 0;
+	struct et131x_adapter *adapter = netdev_priv(netdev);
+
+	DBG_ENTER(et131x_dbginfo);
+
+	/* Make sure the requested MTU is valid */
+	if (new_mtu == 0 || new_mtu > 9216) {
+		DBG_LEAVE(et131x_dbginfo);
+		return -EINVAL;
+	}
+
+	/* Stop the netif queue */
+	netif_stop_queue(netdev);
+
+	/* Stop the Tx and Rx DMA engines */
+	et131x_rx_dma_disable(adapter);
+	et131x_tx_dma_disable(adapter);
+
+	/* Disable device interrupts */
+	et131x_disable_interrupts(adapter);
+	et131x_handle_send_interrupt(adapter);
+	et131x_handle_recv_interrupt(adapter);
+
+	/* Set the new MTU */
+	netdev->mtu = new_mtu;
+
+	/* Free Rx DMA memory */
+	et131x_adapter_memory_free(adapter);
+
+	/* Set the config parameter for Jumbo Packet support */
+	adapter->RegistryJumboPacket = new_mtu + 14;
+	et131x_soft_reset(adapter);
+
+	/* Alloc and init Rx DMA memory */
+	result = et131x_adapter_memory_alloc(adapter);
+	if (result != 0) {
+		DBG_WARNING(et131x_dbginfo,
+			    "Change MTU failed; couldn't re-alloc DMA memory\n");
+		return result;
+	}
+
+	et131x_init_send(adapter);
+
+	et131x_setup_hardware_properties(adapter);
+	memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
+
+	/* Init the device with the new settings */
+	et131x_adapter_setup(adapter);
+
+	/* Enable interrupts */
+	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
+		et131x_enable_interrupts(adapter);
+	}
+
+	/* Restart the Tx and Rx DMA engines */
+	et131x_rx_dma_enable(adapter);
+	et131x_tx_dma_enable(adapter);
+
+	/* Restart the netif queue */
+	netif_wake_queue(netdev);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return result;
+}
+
+/**
+ * et131x_set_mac_addr - handler to change the MAC address for the device
+ * @netdev: device whose MAC is to be changed
+ * @new_mac: the desired MAC address
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ *
+ * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
+ */
+int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
+{
+	int result = 0;
+	struct et131x_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *address = new_mac;
+
+	DBG_ENTER(et131x_dbginfo);
+	// begin blux
+	// DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" );
+
+	if (adapter == NULL) {
+		DBG_LEAVE(et131x_dbginfo);
+		return -ENODEV;
+	}
+
+	/* Make sure the requested MAC is valid */
+	if (!is_valid_ether_addr(address->sa_data)) {
+		DBG_LEAVE(et131x_dbginfo);
+		return -EINVAL;
+	}
+
+	/* Stop the netif queue */
+	netif_stop_queue(netdev);
+
+	/* Stop the Tx and Rx DMA engines */
+	et131x_rx_dma_disable(adapter);
+	et131x_tx_dma_disable(adapter);
+
+	/* Disable device interrupts */
+	et131x_disable_interrupts(adapter);
+	et131x_handle_send_interrupt(adapter);
+	et131x_handle_recv_interrupt(adapter);
+
+	/* Set the new MAC */
+	// netdev->set_mac_address  = &new_mac;
+	// netdev->mtu = new_mtu;
+
+	memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
+
+	printk("%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       netdev->name, netdev->dev_addr[0], netdev->dev_addr[1],
+	       netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4],
+	       netdev->dev_addr[5]);
+
+	/* Free Rx DMA memory */
+	et131x_adapter_memory_free(adapter);
+
+	/* Set the config parameter for Jumbo Packet support */
+	// adapter->RegistryJumboPacket = new_mtu + 14;
+	// blux: not needet here, w'll change the MAC
+
+	et131x_soft_reset(adapter);
+
+	/* Alloc and init Rx DMA memory */
+	result = et131x_adapter_memory_alloc(adapter);
+	if (result != 0) {
+		DBG_WARNING(et131x_dbginfo,
+			    "Change MAC failed; couldn't re-alloc DMA memory\n");
+		return result;
+	}
+
+	et131x_init_send(adapter);
+
+	et131x_setup_hardware_properties(adapter);
+	// memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN );
+	// blux: no, do not override our nice address
+
+	/* Init the device with the new settings */
+	et131x_adapter_setup(adapter);
+
+	/* Enable interrupts */
+	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
+		et131x_enable_interrupts(adapter);
+	}
+
+	/* Restart the Tx and Rx DMA engines */
+	et131x_rx_dma_enable(adapter);
+	et131x_tx_dma_enable(adapter);
+
+	/* Restart the netif queue */
+	netif_wake_queue(netdev);
+
+	DBG_LEAVE(et131x_dbginfo);
+	return result;
+}

drivers/staging/et131x/et131x_netdev.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_netdev.h - Defines, structs, enums, prototypes, etc. related to the
+ *                   driver's net_device support.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_NETDEV_H__
+#define __ET131X_NETDEV_H__
+
+struct net_device *et131x_device_alloc(void);
+
+#endif /* __ET131X_NETDEV_H__ */

drivers/staging/et131x/et131x_version.h

+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *   http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_version.h - This file provides system and device version information.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software.  Using this
+ * software indicates your acceptance of these terms and conditions.  If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following Disclaimer as comments in the code as
+ *    well as in the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following Disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_VERSION_H__
+#define __ET131X_VERSION_H__
+
+#define DRIVER_AUTHOR		"Victor Soriano (vjsoriano@agere.com)"
+#define DRIVER_LICENSE		"Dual BSD/GPL"
+#define DRIVER_DEVICE_STRING	"ET1310"
+#define DRIVER_NAME		"et131x"
+#define DRIVER_MAJOR_VERSION	1
+#define DRIVER_MINOR_VERSION	2
+#define DRIVER_PATCH_VERSION	3
+#define DRIVER_VERSION_STRING	"1.2.3"
+#define DRIVER_VENDOR		"Agere Systems, http://www.agere.com"
+#define DRIVER_DESC		"10/100/1000 Base-T Ethernet Driver"
+
+#define STRUCT_MODULE		"net"	/* blux: missed by the kernel */
+
+#define DRIVER_INFO		DRIVER_DESC " for the "\
+				DRIVER_DEVICE_STRING ", v" \
+				DRIVER_VERSION_STRING " by " \
+				DRIVER_VENDOR
+
+#define DRIVER_NAME_EXT		"et131x.ko"
+
+#endif /* __ET131X_VERSION_H__ */