clk: sunxi-ng: Add A33 CCU support

This commit introduces the clocks found in the Allwinner A33 CCU.

Since this SoC is very similar to the A23, and we share a significant share
of the DTSI, the clock IDs that are going to be used will also be shared
with the A23, hence the name of the various header files.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
 Required properties :
 - compatible: must contain one of the following compatibles:
 		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
 
 - reg: Must contain the registers base address and length

drivers/clk/sunxi-ng/Kconfig

@@ -65,6 +65,18 @@ config SUN6I_A31_CCU
 	select SUNXI_CCU_PHASE
 	default MACH_SUN6I
 
+config SUN8I_A33_CCU
+	bool "Support for the Allwinner A33 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 config SUN8I_H3_CCU
 	bool "Support for the Allwinner H3 CCU"
 	select SUNXI_CCU_DIV

drivers/clk/sunxi-ng/Makefile

@@ -19,4 +19,5 @@ obj-$(CONFIG_SUNXI_CCU_MP)	+= ccu_mp.o
 
 # SoC support
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
+obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o

drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h

+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_A23_A33_H_
+#define _CCU_SUN8I_A23_A33_H_
+
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+#define CLK_PLL_CPUX		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VIDEO_2X	7
+#define CLK_PLL_VE		8
+#define CLK_PLL_DDR0		9
+#define CLK_PLL_PERIPH		10
+#define CLK_PLL_PERIPH_2X	11
+#define CLK_PLL_GPU		12
+#define CLK_PLL_MIPI		13
+#define CLK_PLL_HSIC		14
+#define CLK_PLL_DE		15
+#define CLK_PLL_DDR1		16
+#define CLK_PLL_DDR		17
+
+/* The CPUX clock is exported */
+
+#define CLK_AXI			19
+#define CLK_AHB1		20
+#define CLK_APB1		21
+#define CLK_APB2		22
+
+/* All the bus gates are exported */
+
+/* The first part of the mod clocks is exported */
+
+#define CLK_DRAM		79
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		95
+
+/* And the last module clocks are exported */
+
+#define CLK_NUMBER		(CLK_ATS + 1)
+
+#endif /* _CCU_SUN8I_A23_A33_H_ */

drivers/clk/sunxi-ng/ccu-sun8i-a33.c

+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-a23-a33.h"
+
+static struct ccu_nkmp pll_cpux_clk = {
+	.enable = BIT(31),
+	.lock	= BIT(28),
+
+	.n	= _SUNXI_CCU_MULT(8, 5),
+	.k	= _SUNXI_CCU_MULT(4, 2),
+	.m	= _SUNXI_CCU_DIV(0, 2),
+	.p	= _SUNXI_CCU_DIV_MAX(16, 2, 4),
+
+	.common	= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "osc24M",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_A33_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,		/* N */
+				   0, 5,		/* M */
+				   BIT(31),		/* gate */
+				   BIT(28),		/* lock */
+				   CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+				    "osc24M", 0x020,
+				    8, 5,		/* N */
+				    4, 2,		/* K */
+				    0, 2,		/* M */
+				    BIT(31),		/* gate */
+				    BIT(28),		/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph_clk, "pll-periph",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+					"osc24M", 0x038,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/*
+ * The MIPI PLL has 2 modes: "MIPI" and "HDMI".
+ *
+ * The MIPI mode is a standard NKM-style clock. The HDMI mode is an
+ * integer / fractional clock with switchable multipliers and dividers.
+ * This is not supported here. We hardcode the PLL to MIPI mode.
+ */
+#define SUN8I_A33_PLL_MIPI_REG	0x040
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi",
+				    "pll-video", 0x040,
+				    8, 4,		/* N */
+				    4, 2,		/* K */
+				    0, 4,		/* M */
+				    BIT(31),		/* gate */
+				    BIT(28),		/* lock */
+				    CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
+					"osc24M", 0x044,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+					"osc24M", 0x048,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/* TODO: Fix N */
+static SUNXI_CCU_N_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+				  "osc24M", 0x04c,
+				  8, 6,			/* N */
+				  BIT(31),		/* gate */
+				  BIT(28),		/* lock */
+				  CLK_SET_RATE_UNGATE);
+
+static const char * const cpux_parents[] = { "osc32k", "osc24M",
+					     "pll-cpux" , "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi" , "pll-periph" };
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 3,
+			.shift	= 6,
+			.width	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph" , "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk,	"bus-mipi-dsi",	"ahb1",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ss_clk,	"bus-ss",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_nand_clk,	"bus-nand",	"ahb1",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb1",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci_clk,	"bus-ehci",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ohci_clk,	"bus-ohci",	"ahb1",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_lcd_clk,	"bus-lcd",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_de_be_clk,	"bus-de-be",	"ahb1",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_de_fe_clk,	"bus-de-fe",	"ahb1",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk,	"bus-gpu",	"ahb1",
+		      0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk,	"bus-msgbox",	"ahb1",
+		      0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk,	"bus-spinlock",	"ahb1",
+		      0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_drc_clk,	"bus-drc",	"ahb1",
+		      0x064, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_sat_clk,	"bus-sat",	"ahb1",
+		      0x064, BIT(26), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb1",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk,	"bus-i2s1",	"apb1",
+		      0x068, BIT(13), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
+		      0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk,	"bus-uart4",	"apb2",
+		      0x06c, BIT(20), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					    "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+			       0x0b0, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+			       0x0b4, 16, 2, BIT(31), 0);
+
+/* TODO: the parent for most of the USB clocks is not known */
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk,	"usb-phy1",	"osc24M",
+		      0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk,	"usb-hsic",	"pll-hsic",
+		      0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_hsic_12M_clk,	"usb-hsic-12M",	"osc24M",
+		      0x0cc, BIT(11), 0);
+static SUNXI_CCU_GATE(usb_ohci_clk,	"usb-ohci",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+static SUNXI_CCU_M(dram_clk, "dram", "pll-ddr",
+		   0x0f4, 0, 4, CLK_IS_CRITICAL);
+
+static const char * const pll_ddr_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_MUX(pll_ddr_clk, "pll-ddr", pll_ddr_parents,
+		     0x0f8, 16, 1, 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_drc_clk,	"dram-drc",	"dram",
+		      0x100, BIT(16), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk,	"dram-de-fe",	"dram",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk,	"dram-de-be",	"dram",
+		      0x100, BIT(26), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph-2x",
+					   "pll-gpu", "pll-de" };
+static const u8 de_table[] = { 0, 2, 3, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_be_clk, "de-be",
+				       de_parents, de_table,
+				       0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_fe_clk, "de-fe",
+				       de_parents, de_table,
+				       0x10c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const lcd_ch0_parents[] = { "pll-video", "pll-video-2x",
+						"pll-mipi" };
+static const u8 lcd_ch0_table[] = { 0, 2, 4 };
+static SUNXI_CCU_MUX_TABLE_WITH_GATE(lcd_ch0_clk, "lcd-ch0",
+				     lcd_ch0_parents, lcd_ch0_table,
+				     0x118, 24, 3, BIT(31),
+				     CLK_SET_RATE_PARENT);
+
+static const char * const lcd_ch1_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 lcd_ch1_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd_ch1_clk, "lcd-ch1",
+				       lcd_ch1_parents, lcd_ch1_table,
+				       0x12c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-video", "pll-de",
+						 "pll-mipi", "pll-ve" };
+static const u8 csi_sclk_table[] = { 0, 3, 4, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_sclk_clk, "csi-sclk",
+				       csi_sclk_parents, csi_sclk_table,
+				       0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "pll-video", "pll-de",
+						 "osc24M" };
+static const u8 csi_mclk_table[] = { 0, 3, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_mclk_clk, "csi-mclk",
+				       csi_mclk_parents, csi_mclk_table,
+				       0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), 0);
+static SUNXI_CCU_GATE(ac_dig_4x_clk,	"ac-dig-4x",	"pll-audio-4x",
+		      0x140, BIT(30), 0);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph-2x",
+					     "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const dsi_sclk_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 dsi_sclk_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_sclk_clk, "dsi-sclk",
+				       dsi_sclk_parents, dsi_sclk_table,
+				       0x168, 16, 4, 24, 2, BIT(31), 0);
+
+static const char * const dsi_dphy_parents[] = { "pll-video", "pll-periph" };
+static const u8 dsi_dphy_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
+				       dsi_dphy_parents, dsi_dphy_table,
+				       0x168, 0, 4, 8, 2, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(drc_clk, "drc",
+				       de_parents, de_table,
+				       0x180, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+			     0x1a0, 0, 3, BIT(31), 0);
+
+static const char * const ats_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ats_clk, "ats", ats_parents,
+				 0x1b0, 0, 3, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun8i_a33_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph_clk.common,
+	&pll_gpu_clk.common,
+	&pll_mipi_clk.common,
+	&pll_hsic_clk.common,
+	&pll_de_clk.common,
+	&pll_ddr1_clk.common,
+	&pll_ddr_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&bus_ss_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_nand_clk.common,
+	&bus_dram_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci_clk.common,
+	&bus_ohci_clk.common,
+	&bus_ve_clk.common,
+	&bus_lcd_clk.common,
+	&bus_csi_clk.common,
+	&bus_de_fe_clk.common,
+	&bus_de_be_clk.common,
+	&bus_gpu_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_drc_clk.common,
+	&bus_sat_clk.common,
+	&bus_codec_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&nand_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&ss_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_hsic_clk.common,
+	&usb_hsic_12M_clk.common,
+	&usb_ohci_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_drc_clk.common,
+	&dram_de_fe_clk.common,
+	&dram_de_be_clk.common,
+	&de_be_clk.common,
+	&de_fe_clk.common,
+	&lcd_ch0_clk.common,
+	&lcd_ch1_clk.common,
+	&csi_sclk_clk.common,
+	&csi_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&ac_dig_4x_clk.common,
+	&avs_clk.common,
+	&mbus_clk.common,
+	&dsi_sclk_clk.common,
+	&dsi_dphy_clk.common,
+	&drc_clk.common,
+	&gpu_clk.common,
+	&ats_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph_2x_clk, "pll-periph-2x",
+			"pll-periph", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video_2x_clk, "pll-video-2x",
+			"pll-video", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_a33_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VIDEO_2X]	= &pll_video_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.common.hw,
+		[CLK_PLL_PERIPH_2X]	= &pll_periph_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_MIPI]		= &pll_mipi_clk.common.hw,
+		[CLK_PLL_HSIC]		= &pll_hsic_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_DDR1]		= &pll_ddr1_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_BUS_SS]		= &bus_ss_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI]		= &bus_ehci_clk.common.hw,
+		[CLK_BUS_OHCI]		= &bus_ohci_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_LCD]		= &bus_lcd_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_DE_BE]		= &bus_de_be_clk.common.hw,
+		[CLK_BUS_DE_FE]		= &bus_de_fe_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_DRC]		= &bus_drc_clk.common.hw,
+		[CLK_BUS_SAT]		= &bus_sat_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_HSIC]		= &usb_hsic_clk.common.hw,
+		[CLK_USB_HSIC_12M]	= &usb_hsic_12M_clk.common.hw,
+		[CLK_USB_OHCI]		= &usb_ohci_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_DRC]		= &dram_drc_clk.common.hw,
+		[CLK_DRAM_DE_FE]	= &dram_de_fe_clk.common.hw,
+		[CLK_DRAM_DE_BE]	= &dram_de_be_clk.common.hw,
+		[CLK_DE_BE]		= &de_be_clk.common.hw,
+		[CLK_DE_FE]		= &de_fe_clk.common.hw,
+		[CLK_LCD_CH0]		= &lcd_ch0_clk.common.hw,
+		[CLK_LCD_CH1]		= &lcd_ch1_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AC_DIG_4X]		= &ac_dig_4x_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DSI_SCLK]		= &dsi_sclk_clk.common.hw,
+		[CLK_DSI_DPHY]		= &dsi_dphy_clk.common.hw,
+		[CLK_DRC]		= &drc_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_ATS]		= &ats_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_a33_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
+	[RST_USB_HSIC]		=  { 0x0cc, BIT(2) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_MIPI_DSI]	=  { 0x2c0, BIT(1) },
+	[RST_BUS_SS]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_NAND]		=  { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_EHCI]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_OHCI]		=  { 0x2c0, BIT(29) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_LCD]		=  { 0x2c4, BIT(4) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_DE_BE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DE_FE]		=  { 0x2c4, BIT(14) },
+	[RST_BUS_GPU]		=  { 0x2c4, BIT(20) },
+	[RST_BUS_MSGBOX]	=  { 0x2c4, BIT(21) },
+	[RST_BUS_SPINLOCK]	=  { 0x2c4, BIT(22) },
+	[RST_BUS_DRC]		=  { 0x2c4, BIT(25) },
+	[RST_BUS_SAT]		=  { 0x2c4, BIT(26) },
+
+	[RST_BUS_LVDS]		=  { 0x2c8, BIT(0) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
+
+	[RST_BUS_I2C0]		=  { 0x2d4, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d4, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d4, BIT(2) },
+	[RST_BUS_UART0]		=  { 0x2d4, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d4, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d4, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d4, BIT(19) },
+	[RST_BUS_UART4]		=  { 0x2d4, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = {
+	.ccu_clks	= sun8i_a33_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_a33_ccu_clks),
+
+	.hw_clks	= &sun8i_a33_hw_clks,
+
+	.resets		= sun8i_a33_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a33_ccu_resets),
+};
+
+static void __init sun8i_a33_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_A33_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_A33_PLL_AUDIO_REG);
+
+	/* Force PLL-MIPI to MIPI mode */
+	val = readl(reg + SUN8I_A33_PLL_MIPI_REG);
+	val &= ~BIT(16);
+	writel(val, reg + SUN8I_A33_PLL_MIPI_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_a33_ccu, "allwinner,sun8i-a33-ccu",
+	       sun8i_a33_ccu_setup);

include/dt-bindings/clock/sun8i-a23-a33-ccu.h

+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
+#define _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
+
+#define CLK_CPUX		18
+
+#define CLK_BUS_MIPI_DSI	23
+#define CLK_BUS_SS		24
+#define CLK_BUS_DMA		25
+#define CLK_BUS_MMC0		26
+#define CLK_BUS_MMC1		27
+#define CLK_BUS_MMC2		28
+#define CLK_BUS_NAND		29
+#define CLK_BUS_DRAM		30
+#define CLK_BUS_HSTIMER		31
+#define CLK_BUS_SPI0		32
+#define CLK_BUS_SPI1		33
+#define CLK_BUS_OTG		34
+#define CLK_BUS_EHCI		35
+#define CLK_BUS_OHCI		36
+#define CLK_BUS_VE		37
+#define CLK_BUS_LCD		38
+#define CLK_BUS_CSI		39
+#define CLK_BUS_DE_BE		40
+#define CLK_BUS_DE_FE		41
+#define CLK_BUS_GPU		42
+#define CLK_BUS_MSGBOX		43
+#define CLK_BUS_SPINLOCK	44
+#define CLK_BUS_DRC		45
+#define CLK_BUS_SAT		46
+#define CLK_BUS_CODEC		47
+#define CLK_BUS_PIO		48
+#define CLK_BUS_I2S0		49
+#define CLK_BUS_I2S1		50
+#define CLK_BUS_I2C0		51
+#define CLK_BUS_I2C1		52
+#define CLK_BUS_I2C2		53
+#define CLK_BUS_UART0		54
+#define CLK_BUS_UART1		55
+#define CLK_BUS_UART2		56
+#define CLK_BUS_UART3		57
+#define CLK_BUS_UART4		58
+#define CLK_NAND		59
+#define CLK_MMC0		60
+#define CLK_MMC0_SAMPLE		61
+#define CLK_MMC0_OUTPUT		62
+#define CLK_MMC1		63
+#define CLK_MMC1_SAMPLE		64
+#define CLK_MMC1_OUTPUT		65
+#define CLK_MMC2		66
+#define CLK_MMC2_SAMPLE		67
+#define CLK_MMC2_OUTPUT		68
+#define CLK_SS			69
+#define CLK_SPI0		70
+#define CLK_SPI1		71
+#define CLK_I2S0		72
+#define CLK_I2S1		73
+#define CLK_USB_PHY0		74
+#define CLK_USB_PHY1		75
+#define CLK_USB_HSIC		76
+#define CLK_USB_HSIC_12M	77
+#define CLK_USB_OHCI		78
+
+#define CLK_DRAM_VE		80
+#define CLK_DRAM_CSI		81
+#define CLK_DRAM_DRC		82
+#define CLK_DRAM_DE_FE		83
+#define CLK_DRAM_DE_BE		84
+#define CLK_DE_BE		85
+#define CLK_DE_FE		86
+#define CLK_LCD_CH0		87
+#define CLK_LCD_CH1		88
+#define CLK_CSI_SCLK		89
+#define CLK_CSI_MCLK		90
+#define CLK_VE			91
+#define CLK_AC_DIG		92
+#define CLK_AC_DIG_4X		93
+#define CLK_AVS			94
+
+#define CLK_DSI_SCLK		96
+#define CLK_DSI_DPHY		97
+#define CLK_DRC			98
+#define CLK_GPU			99
+#define CLK_ATS			100
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ */

include/dt-bindings/reset/sun8i-a23-a33-ccu.h

+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_A23_A33_H_
+#define _DT_BINDINGS_RST_SUN8I_A23_A33_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_HSIC		2
+#define RST_MBUS		3
+#define RST_BUS_MIPI_DSI	4
+#define RST_BUS_SS		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_NAND		10
+#define RST_BUS_DRAM		11
+#define RST_BUS_HSTIMER		12
+#define RST_BUS_SPI0		13
+#define RST_BUS_SPI1		14
+#define RST_BUS_OTG		15
+#define RST_BUS_EHCI		16
+#define RST_BUS_OHCI		17
+#define RST_BUS_VE		18
+#define RST_BUS_LCD		19
+#define RST_BUS_CSI		20
+#define RST_BUS_DE_BE		21
+#define RST_BUS_DE_FE		22
+#define RST_BUS_GPU		23
+#define RST_BUS_MSGBOX		24
+#define RST_BUS_SPINLOCK	25
+#define RST_BUS_DRC		26
+#define RST_BUS_SAT		27
+#define RST_BUS_LVDS		28
+#define RST_BUS_CODEC		29
+#define RST_BUS_I2S0		30
+#define RST_BUS_I2S1		31
+#define RST_BUS_I2C0		32
+#define RST_BUS_I2C1		33
+#define RST_BUS_I2C2		34
+#define RST_BUS_UART0		35
+#define RST_BUS_UART1		36
+#define RST_BUS_UART2		37
+#define RST_BUS_UART3		38
+#define RST_BUS_UART4		39
+
+#endif /* _DT_BINDINGS_RST_SUN8I_A23_A33_H_ */