rtlwifi: rtl8192se: Merge phy routines

Merge routines phy.c and phy.h for RTL8192SE.
Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtlwifi/rtl8192se/phy.c

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "table.h"
+
+static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask)
+{
+	u32 i;
+
+	for (i = 0; i <= 31; i++) {
+		if (((bitmask >> i) & 0x1) == 1)
+			break;
+	}
+
+	return i;
+}
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 returnvalue = 0, originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)\n",
+			regaddr, bitmask));
+
+	originalvalue = rtl_read_dword(rtlpriv, regaddr);
+	bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+	returnvalue = (originalvalue & bitmask) >> bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 ("BBR MASK=0x%x Addr[0x%x]=0x%x\n",
+		 bitmask, regaddr, originalvalue));
+
+	return returnvalue;
+
+}
+
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+			   u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+			" data(%#x)\n", regaddr, bitmask, data));
+
+	if (bitmask != MASKDWORD) {
+		originalvalue = rtl_read_dword(rtlpriv, regaddr);
+		bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+		data = ((originalvalue & (~bitmask)) | (data << bitshift));
+	}
+
+	rtl_write_dword(rtlpriv, regaddr, data);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+			" data(%#x)\n",	regaddr, bitmask, data));
+
+}
+
+static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw,
+				      enum radio_path rfpath, u32 offset)
+{
+
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+	u32 newoffset;
+	u32 tmplong, tmplong2;
+	u8 rfpi_enable = 0;
+	u32 retvalue = 0;
+
+	offset &= 0x3f;
+	newoffset = offset;
+
+	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+
+	if (rfpath == RF90_PATH_A)
+		tmplong2 = tmplong;
+	else
+		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+
+	tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) |
+			BLSSI_READEDGE;
+
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+		      tmplong & (~BLSSI_READEDGE));
+
+	mdelay(1);
+
+	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+	mdelay(1);
+
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong |
+		      BLSSI_READEDGE);
+	mdelay(1);
+
+	if (rfpath == RF90_PATH_A)
+		rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+						BIT(8));
+	else if (rfpath == RF90_PATH_B)
+		rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+						BIT(8));
+
+	if (rfpi_enable)
+		retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi,
+					 BLSSI_READBACK_DATA);
+	else
+		retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+					 BLSSI_READBACK_DATA);
+
+	retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+				 BLSSI_READBACK_DATA);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n",
+		 rfpath, pphyreg->rflssi_readback, retvalue));
+
+	return retvalue;
+
+}
+
+static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw,
+					enum radio_path rfpath, u32 offset,
+					u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+	u32 data_and_addr = 0;
+	u32 newoffset;
+
+	offset &= 0x3f;
+	newoffset = offset;
+
+	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n",
+		 rfpath, pphyreg->rf3wire_offset, data_and_addr));
+}
+
+
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			    u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 original_value, readback_value, bitshift;
+	unsigned long flags;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+		 "bitmask(%#x)\n", regaddr, rfpath, bitmask));
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr);
+
+	bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+	readback_value = (original_value & bitmask) >> bitshift;
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+		 "bitmask(%#x), original_value(%#x)\n", regaddr, rfpath,
+		 bitmask, original_value));
+
+	return readback_value;
+}
+
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			   u32 regaddr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 original_value, bitshift;
+	unsigned long flags;
+
+	if (!((rtlphy->rf_pathmap >> rfpath) & 0x1))
+		return;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+		 " data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	if (bitmask != RFREG_OFFSET_MASK) {
+		original_value = _rtl92s_phy_rf_serial_read(hw, rfpath,
+							    regaddr);
+		bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+		data = ((original_value & (~bitmask)) | (data << bitshift));
+	}
+
+	_rtl92s_phy_rf_serial_write(hw, rfpath, regaddr, data);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x), "
+		 "data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+
+}
+
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
+				      u8 operation)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (!is_hal_stop(rtlhal)) {
+		switch (operation) {
+		case SCAN_OPT_BACKUP:
+			rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN);
+			break;
+		case SCAN_OPT_RESTORE:
+			rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Unknown operation.\n"));
+			break;
+		}
+	}
+}
+
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+			    enum nl80211_channel_type ch_type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 reg_bw_opmode;
+	u8 reg_prsr_rsc;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("Switch to %s bandwidth\n",
+		  rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+		  "20MHz" : "40MHz"));
+
+	if (rtlphy->set_bwmode_inprogress)
+		return;
+	if (is_hal_stop(rtlhal))
+		return;
+
+	rtlphy->set_bwmode_inprogress = true;
+
+	reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE);
+	reg_prsr_rsc = rtl_read_byte(rtlpriv, RRSR + 2);
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		reg_bw_opmode |= BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n",
+			 rtlphy->current_chan_bw));
+		break;
+	}
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+
+		if (rtlhal->version >= VERSION_8192S_BCUT)
+			rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+
+		rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+				(mac->cur_40_prime_sc >> 1));
+		rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+
+		if (rtlhal->version >= VERSION_8192S_BCUT)
+			rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+		break;
+	}
+
+	rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+	rtlphy->set_bwmode_inprogress = false;
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
+static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+		u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid,
+		u32 para1, u32 para2, u32 msdelay)
+{
+	struct swchnlcmd *pcmd;
+
+	if (cmdtable == NULL) {
+		RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
+		return false;
+	}
+
+	if (cmdtableidx >= cmdtablesz)
+		return false;
+
+	pcmd = cmdtable + cmdtableidx;
+	pcmd->cmdid = cmdid;
+	pcmd->para1 = para1;
+	pcmd->para2 = para2;
+	pcmd->msdelay = msdelay;
+
+	return true;
+}
+
+static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+	     u8 channel, u8 *stage, u8 *step, u32 *delay)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+	u32 precommoncmdcnt;
+	struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+	u32 postcommoncmdcnt;
+	struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+	u32 rfdependcmdcnt;
+	struct swchnlcmd *currentcmd = NULL;
+	u8 rfpath;
+	u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+	precommoncmdcnt = 0;
+	_rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+			MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0);
+	_rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+			MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+
+	postcommoncmdcnt = 0;
+
+	_rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+			MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+
+	rfdependcmdcnt = 0;
+
+	RT_ASSERT((channel >= 1 && channel <= 14),
+		  ("illegal channel for Zebra: %d\n", channel));
+
+	_rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
+					 RF_CHNLBW, channel, 10);
+
+	_rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+			MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
+
+	do {
+		switch (*stage) {
+		case 0:
+			currentcmd = &precommoncmd[*step];
+			break;
+		case 1:
+			currentcmd = &rfdependcmd[*step];
+			break;
+		case 2:
+			currentcmd = &postcommoncmd[*step];
+			break;
+		}
+
+		if (currentcmd->cmdid == CMDID_END) {
+			if ((*stage) == 2) {
+				return true;
+			} else {
+				(*stage)++;
+				(*step) = 0;
+				continue;
+			}
+		}
+
+		switch (currentcmd->cmdid) {
+		case CMDID_SET_TXPOWEROWER_LEVEL:
+			rtl92s_phy_set_txpower(hw, channel);
+			break;
+		case CMDID_WRITEPORT_ULONG:
+			rtl_write_dword(rtlpriv, currentcmd->para1,
+					currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_USHORT:
+			rtl_write_word(rtlpriv, currentcmd->para1,
+				       (u16)currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_UCHAR:
+			rtl_write_byte(rtlpriv, currentcmd->para1,
+				       (u8)currentcmd->para2);
+			break;
+		case CMDID_RF_WRITEREG:
+			for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+				rtlphy->rfreg_chnlval[rfpath] =
+					 ((rtlphy->rfreg_chnlval[rfpath] &
+					 0xfffffc00) | currentcmd->para2);
+				rtl_set_rfreg(hw, (enum radio_path)rfpath,
+					      currentcmd->para1,
+					      RFREG_OFFSET_MASK,
+					      rtlphy->rfreg_chnlval[rfpath]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+
+		break;
+	} while (true);
+
+	(*delay) = currentcmd->msdelay;
+	(*step)++;
+	return false;
+}
+
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 delay;
+	bool ret;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+		 ("switch to channel%d\n",
+		 rtlphy->current_channel));
+
+	if (rtlphy->sw_chnl_inprogress)
+		return 0;
+
+	if (rtlphy->set_bwmode_inprogress)
+		return 0;
+
+	if (is_hal_stop(rtlhal))
+		return 0;
+
+	rtlphy->sw_chnl_inprogress = true;
+	rtlphy->sw_chnl_stage = 0;
+	rtlphy->sw_chnl_step = 0;
+
+	do {
+		if (!rtlphy->sw_chnl_inprogress)
+			break;
+
+		ret = _rtl92s_phy_sw_chnl_step_by_step(hw,
+				 rtlphy->current_channel,
+				 &rtlphy->sw_chnl_stage,
+				 &rtlphy->sw_chnl_step, &delay);
+		if (!ret) {
+			if (delay > 0)
+				mdelay(delay);
+			else
+				continue;
+		} else {
+			rtlphy->sw_chnl_inprogress = false;
+		}
+		break;
+	} while (true);
+
+	rtlphy->sw_chnl_inprogress = false;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+
+	return 1;
+}
+
+static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1btmp;
+
+	u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+	u1btmp |= BIT(0);
+
+	rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+	rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+	rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+	udelay(100);
+
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+	udelay(10);
+
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+	udelay(10);
+
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	udelay(10);
+
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+
+	/* we should chnge GPIO to input mode
+	 * this will drop away current about 25mA*/
+	rtl8192se_gpiobit3_cfg_inputmode(hw);
+}
+
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				   enum rf_pwrstate rfpwr_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool bresult = true;
+	u8 i, queue_id;
+	struct rtl8192_tx_ring *ring = NULL;
+
+	if (rfpwr_state == ppsc->rfpwr_state)
+		return false;
+
+	ppsc->set_rfpowerstate_inprogress = true;
+
+	switch (rfpwr_state) {
+	case ERFON:{
+			if ((ppsc->rfpwr_state == ERFOFF) &&
+			    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+
+				bool rtstatus;
+				u32 InitializeCount = 0;
+				do {
+					InitializeCount++;
+					RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+						 ("IPS Set eRf nic enable\n"));
+					rtstatus = rtl_ps_enable_nic(hw);
+				} while ((rtstatus != true) &&
+					 (InitializeCount < 10));
+
+				RT_CLEAR_PS_LEVEL(ppsc,
+						  RT_RF_OFF_LEVL_HALT_NIC);
+			} else {
+				RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+					 ("awake, sleeped:%d ms "
+					"state_inap:%x\n",
+					jiffies_to_msecs(jiffies -
+					ppsc->last_sleep_jiffies),
+					rtlpriv->psc.state_inap));
+				ppsc->last_awake_jiffies = jiffies;
+				rtl_write_word(rtlpriv, CMDR, 0x37FC);
+				rtl_write_byte(rtlpriv, TXPAUSE, 0x00);
+				rtl_write_byte(rtlpriv, PHY_CCA, 0x3);
+			}
+
+			if (mac->link_state == MAC80211_LINKED)
+				rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_LINK);
+			else
+				rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_NO_LINK);
+			break;
+		}
+	case ERFOFF:{
+			if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+					 ("IPS Set eRf nic disable\n"));
+				rtl_ps_disable_nic(hw);
+				RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+			} else {
+				if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+					rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_NO_LINK);
+				else
+					rtlpriv->cfg->ops->led_control(hw,
+							 LED_CTL_POWER_OFF);
+			}
+			break;
+		}
+	case ERFSLEEP:
+			if (ppsc->rfpwr_state == ERFOFF)
+				break;
+
+			for (queue_id = 0, i = 0;
+			     queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+				ring = &pcipriv->dev.tx_ring[queue_id];
+				if (skb_queue_len(&ring->queue) == 0 ||
+					queue_id == BEACON_QUEUE) {
+					queue_id++;
+					continue;
+				} else {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("eRf Off/Sleep: "
+						 "%d times TcbBusyQueue[%d] = "
+						 "%d before doze!\n",
+						 (i + 1), queue_id,
+						 skb_queue_len(&ring->queue)));
+
+					udelay(10);
+					i++;
+				}
+
+				if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("\nERFOFF: %d times"
+						 "TcbBusyQueue[%d] = %d !\n",
+						 MAX_DOZE_WAITING_TIMES_9x,
+						 queue_id,
+						 skb_queue_len(&ring->queue)));
+					break;
+				}
+			}
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+				 ("Set ERFSLEEP awaked:%d ms\n",
+				 jiffies_to_msecs(jiffies -
+				 ppsc->last_awake_jiffies)));
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+				 ("sleep awaked:%d ms "
+				"state_inap:%x\n", jiffies_to_msecs(jiffies -
+				ppsc->last_awake_jiffies),
+				rtlpriv->psc.state_inap));
+			ppsc->last_sleep_jiffies = jiffies;
+			_rtl92se_phy_set_rf_sleep(hw);
+	    break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		bresult = false;
+		break;
+	}
+
+	if (bresult)
+		ppsc->rfpwr_state = rfpwr_state;
+
+	ppsc->set_rfpowerstate_inprogress = false;
+
+	return bresult;
+}
+
+static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw,
+						 enum radio_path rfpath)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool rtstatus = true;
+	u32 tmpval = 0;
+
+	/* If inferiority IC, we have to increase the PA bias current */
+	if (rtlhal->ic_class != IC_INFERIORITY_A) {
+		tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf);
+		rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1);
+	}
+
+	return rtstatus;
+}
+
+static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw,
+		u32 reg_addr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (reg_addr == RTXAGC_RATE18_06)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] =
+									 data;
+	if (reg_addr == RTXAGC_RATE54_24)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] =
+									 data;
+	if (reg_addr == RTXAGC_CCK_MCS32)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] =
+									 data;
+	if (reg_addr == RTXAGC_MCS03_MCS00)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] =
+									 data;
+	if (reg_addr == RTXAGC_MCS07_MCS04)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] =
+									 data;
+	if (reg_addr == RTXAGC_MCS11_MCS08)
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] =
+									 data;
+	if (reg_addr == RTXAGC_MCS15_MCS12) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] =
+									 data;
+		rtlphy->pwrgroup_cnt++;
+	}
+}
+
+static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/*RF Interface Sowrtware Control */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+	/* RF Interface Readback Value */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+	/* RF Interface Output (and Enable) */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE;
+
+	/* RF Interface (Output and)  Enable */
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
+
+	/* Addr of LSSI. Wirte RF register by driver */
+	rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+						 RFPGA0_XA_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+						 RFPGA0_XB_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset =
+						 RFPGA0_XC_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset =
+						 RFPGA0_XD_LSSIPARAMETER;
+
+	/* RF parameter */
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+
+	/* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+	rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+	/* Tranceiver A~D HSSI Parameter-1 */
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
+
+	/* Tranceiver A~D HSSI Parameter-2 */
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 = RFPGA0_XD_HSSIPARAMETER2;
+
+	/* RF switch Control */
+	rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control =
+						 RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control =
+						 RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control =
+						 RFPGA0_XCD_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control =
+						 RFPGA0_XCD_SWITCHCONTROL;
+
+	/* AGC control 1  */
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+	/* AGC control 2  */
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+	/* RX AFE control 1  */
+	rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance =
+						 ROFDM0_XARXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance =
+						 ROFDM0_XBRXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance =
+						 ROFDM0_XCRXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance =
+						 ROFDM0_XDRXIQIMBALANCE;
+
+	/* RX AFE control 1   */
+	rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+	/* Tx AFE control 1  */
+	rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance =
+						 ROFDM0_XATXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance =
+						 ROFDM0_XBTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance =
+						 ROFDM0_XCTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance =
+						 ROFDM0_XDTXIQIMBALANCE;
+
+	/* Tx AFE control 2  */
+	rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+	/* Tranceiver LSSI Readback */
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback =
+			 RFPGA0_XA_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback =
+			 RFPGA0_XB_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback =
+			 RFPGA0_XC_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback =
+			 RFPGA0_XD_LSSIREADBACK;
+
+	/* Tranceiver LSSI Readback PI mode  */
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi =
+			 TRANSCEIVERA_HSPI_READBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi =
+			 TRANSCEIVERB_HSPI_READBACK;
+}
+
+
+static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype)
+{
+	int i;
+	u32 *phy_reg_table;
+	u32 *agc_table;
+	u16 phy_reg_len, agc_len;
+
+	agc_len = AGCTAB_ARRAYLENGTH;
+	agc_table = rtl8192seagctab_array;
+	/* Default RF_type: 2T2R */
+	phy_reg_len = PHY_REG_2T2RARRAYLENGTH;
+	phy_reg_table = rtl8192sephy_reg_2t2rarray;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_reg_len; i = i + 2) {
+			if (phy_reg_table[i] == 0xfe)
+				mdelay(50);
+			else if (phy_reg_table[i] == 0xfd)
+				mdelay(5);
+			else if (phy_reg_table[i] == 0xfc)
+				mdelay(1);
+			else if (phy_reg_table[i] == 0xfb)
+				udelay(50);
+			else if (phy_reg_table[i] == 0xfa)
+				udelay(5);
+			else if (phy_reg_table[i] == 0xf9)
+				udelay(1);
+
+			/* Add delay for ECS T20 & LG malow platform, */
+			udelay(1);
+
+			rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD,
+					phy_reg_table[i + 1]);
+		}
+	} else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+		for (i = 0; i < agc_len; i = i + 2) {
+			rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD,
+					agc_table[i + 1]);
+
+			/* Add delay for ECS T20 & LG malow platform */
+			udelay(1);
+		}
+	}
+
+	return true;
+}
+
+static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw,
+					  u8 configtype)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 *phy_regarray2xtxr_table;
+	u16 phy_regarray2xtxr_len;
+	int i;
+
+	if (rtlphy->rf_type == RF_1T1R) {
+		phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray;
+		phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH;
+	} else if (rtlphy->rf_type == RF_1T2R) {
+		phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray;
+		phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH;
+	} else {
+		return false;
+	}
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) {
+			if (phy_regarray2xtxr_table[i] == 0xfe)
+				mdelay(50);
+			else if (phy_regarray2xtxr_table[i] == 0xfd)
+				mdelay(5);
+			else if (phy_regarray2xtxr_table[i] == 0xfc)
+				mdelay(1);
+			else if (phy_regarray2xtxr_table[i] == 0xfb)
+				udelay(50);
+			else if (phy_regarray2xtxr_table[i] == 0xfa)
+				udelay(5);
+			else if (phy_regarray2xtxr_table[i] == 0xf9)
+				udelay(1);
+
+			rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i],
+				phy_regarray2xtxr_table[i + 1],
+				phy_regarray2xtxr_table[i + 2]);
+		}
+	}
+
+	return true;
+}
+
+static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw,
+					  u8 configtype)
+{
+	int i;
+	u32 *phy_table_pg;
+	u16 phy_pg_len;
+
+	phy_pg_len = PHY_REG_ARRAY_PGLENGTH;
+	phy_table_pg = rtl8192sephy_reg_array_pg;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_pg_len; i = i + 3) {
+			if (phy_table_pg[i] == 0xfe)
+				mdelay(50);
+			else if (phy_table_pg[i] == 0xfd)
+				mdelay(5);
+			else if (phy_table_pg[i] == 0xfc)
+				mdelay(1);
+			else if (phy_table_pg[i] == 0xfb)
+				udelay(50);
+			else if (phy_table_pg[i] == 0xfa)
+				udelay(5);
+			else if (phy_table_pg[i] == 0xf9)
+				udelay(1);
+
+			_rtl92s_store_pwrindex_diffrate_offset(hw,
+					phy_table_pg[i],
+					phy_table_pg[i + 1],
+					phy_table_pg[i + 2]);
+			rtl92s_phy_set_bb_reg(hw, phy_table_pg[i],
+					phy_table_pg[i + 1],
+					phy_table_pg[i + 2]);
+		}
+	}
+
+	return true;
+}
+
+static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	bool rtstatus = true;
+
+	/* 1. Read PHY_REG.TXT BB INIT!! */
+	/* We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R */
+	if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R ||
+	    rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) {
+		rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG);
+
+		if (rtlphy->rf_type != RF_2T2R &&
+		    rtlphy->rf_type != RF_2T2R_GREEN)
+			/* so we should reconfig BB reg with the right
+			 * PHY parameters. */
+			rtstatus = _rtl92s_phy_set_bb_to_diff_rf(hw,
+						BASEBAND_CONFIG_PHY_REG);
+	} else {
+		rtstatus = false;
+	}
+
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("Write BB Reg Fail!!"));
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	/* 2. If EEPROM or EFUSE autoload OK, We must config by
+	 *    PHY_REG_PG.txt */
+	if (rtlefuse->autoload_failflag == false) {
+		rtlphy->pwrgroup_cnt = 0;
+
+		rtstatus = _rtl92s_phy_config_bb_with_pg(hw,
+						 BASEBAND_CONFIG_PHY_REG);
+	}
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("_rtl92s_phy_bb_config_parafile(): "
+			 "BB_PG Reg Fail!!"));
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	/* 3. BB AGC table Initialization */
+	rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
+
+	if (rtstatus != true) {
+		printk(KERN_ERR  "_rtl92s_phy_bb_config_parafile(): "
+		       "AGC Table Fail\n");
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	/* Check if the CCK HighPower is turned ON. */
+	/* This is used to calculate PWDB. */
+	rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw,
+			RFPGA0_XA_HSSIPARAMETER2, 0x200));
+
+phy_BB8190_Config_ParaFile_Fail:
+	return rtstatus;
+}
+
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	int i;
+	bool rtstatus = true;
+	u32 *radio_a_table;
+	u32 *radio_b_table;
+	u16 radio_a_tblen, radio_b_tblen;
+
+	radio_a_tblen = RADIOA_1T_ARRAYLENGTH;
+	radio_a_table = rtl8192seradioa_1t_array;
+
+	/* Using Green mode array table for RF_2T2R_GREEN */
+	if (rtlphy->rf_type == RF_2T2R_GREEN) {
+		radio_b_table = rtl8192seradiob_gm_array;
+		radio_b_tblen = RADIOB_GM_ARRAYLENGTH;
+	} else {
+		radio_b_table = rtl8192seradiob_array;
+		radio_b_tblen = RADIOB_ARRAYLENGTH;
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Radio No %x\n", rfpath));
+	rtstatus = true;
+
+	switch (rfpath) {
+	case RF90_PATH_A:
+		for (i = 0; i < radio_a_tblen; i = i + 2) {
+			if (radio_a_table[i] == 0xfe)
+				/* Delay specific ms. Only RF configuration
+				 * requires delay. */
+				mdelay(50);
+			else if (radio_a_table[i] == 0xfd)
+				mdelay(5);
+			else if (radio_a_table[i] == 0xfc)
+				mdelay(1);
+			else if (radio_a_table[i] == 0xfb)
+				udelay(50);
+			else if (radio_a_table[i] == 0xfa)
+				udelay(5);
+			else if (radio_a_table[i] == 0xf9)
+				udelay(1);
+			else
+				rtl92s_phy_set_rf_reg(hw, rfpath,
+						      radio_a_table[i],
+						      MASK20BITS,
+						      radio_a_table[i + 1]);
+
+			/* Add delay for ECS T20 & LG malow platform */
+			udelay(1);
+		}
+
+		/* PA Bias current for inferiority IC */
+		_rtl92s_phy_config_rfpa_bias_current(hw, rfpath);
+		break;
+	case RF90_PATH_B:
+		for (i = 0; i < radio_b_tblen; i = i + 2) {
+			if (radio_b_table[i] == 0xfe)
+				/* Delay specific ms. Only RF configuration
+				 * requires delay.*/
+				mdelay(50);
+			else if (radio_b_table[i] == 0xfd)
+				mdelay(5);
+			else if (radio_b_table[i] == 0xfc)
+				mdelay(1);
+			else if (radio_b_table[i] == 0xfb)
+				udelay(50);
+			else if (radio_b_table[i] == 0xfa)
+				udelay(5);
+			else if (radio_b_table[i] == 0xf9)
+				udelay(1);
+			else
+				rtl92s_phy_set_rf_reg(hw, rfpath,
+						      radio_b_table[i],
+						      MASK20BITS,
+						      radio_b_table[i + 1]);
+
+			/* Add delay for ECS T20 & LG malow platform */
+			udelay(1);
+		}
+		break;
+	case RF90_PATH_C:
+		;
+		break;
+	case RF90_PATH_D:
+		;
+		break;
+	default:
+		break;
+	}
+
+	return rtstatus;
+}
+
+
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+	u32 arraylength;
+	u32 *ptraArray;
+
+	arraylength = MAC_2T_ARRAYLENGTH;
+	ptraArray = rtl8192semac_2t_array;
+
+	for (i = 0; i < arraylength; i = i + 2)
+		rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]);
+
+	return true;
+}
+
+
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	bool rtstatus = true;
+	u8 pathmap, index, rf_num = 0;
+	u8 path1, path2;
+
+	_rtl92s_phy_init_register_definition(hw);
+
+	/* Config BB and AGC */
+	rtstatus = _rtl92s_phy_bb_config_parafile(hw);
+
+
+	/* Check BB/RF confiuration setting. */
+	/* We only need to configure RF which is turned on. */
+	path1 = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf));
+	mdelay(10);
+	path2 = (u8)(rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE, 0xf));
+	pathmap = path1 | path2;
+
+	rtlphy->rf_pathmap = pathmap;
+	for (index = 0; index < 4; index++) {
+		if ((pathmap >> index) & 0x1)
+			rf_num++;
+	}
+
+	if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) ||
+	    (rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
+	    (rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
+	    (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("RF_Type(%x) does not match "
+			 "RF_Num(%x)!!\n", rtlphy->rf_type, rf_num));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+			 ("path1 0x%x, path2 0x%x, pathmap "
+			  "0x%x\n", path1, path2, pathmap));
+	}
+
+	return rtstatus;
+}
+
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/* Initialize general global value */
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	/* Config BB and RF */
+	return rtl92s_phy_rf6052_config(hw);
+}
+
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	/* read rx initial gain */
+	rtlphy->default_initialgain[0] = rtl_get_bbreg(hw,
+			ROFDM0_XAAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[1] = rtl_get_bbreg(hw,
+			ROFDM0_XBAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[2] = rtl_get_bbreg(hw,
+			ROFDM0_XCAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[3] = rtl_get_bbreg(hw,
+			ROFDM0_XDAGCCORE1, MASKBYTE0);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Default initial gain "
+		 "(c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n",
+		 rtlphy->default_initialgain[0],
+		 rtlphy->default_initialgain[1],
+		 rtlphy->default_initialgain[2],
+		 rtlphy->default_initialgain[3]));
+
+	/* read framesync */
+	rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3, MASKBYTE0);
+	rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
+					      MASKDWORD);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("Default framesync (0x%x) = 0x%x\n",
+		 ROFDM0_RXDETECTOR3, rtlphy->framesync));
+
+}
+
+static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
+					  u8 *cckpowerlevel, u8 *ofdmpowerLevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 index = (channel - 1);
+
+	/* 1. CCK */
+	/* RF-A */
+	cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index];
+	/* RF-B */
+	cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index];
+
+	/* 2. OFDM for 1T or 2T */
+	if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) {
+		/* Read HT 40 OFDM TX power */
+		ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index];
+		ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index];
+	} else if (rtlphy->rf_type == RF_2T2R) {
+		/* Read HT 40 OFDM TX power */
+		ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index];
+		ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index];
+	}
+}
+
+static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw,
+		u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
+	rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+}
+
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8	channel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	/* [0]:RF-A, [1]:RF-B */
+	u8 cckpowerlevel[2], ofdmpowerLevel[2];
+
+	if (rtlefuse->txpwr_fromeprom == false)
+		return;
+
+	/* Mainly we use RF-A Tx Power to write the Tx Power registers,
+	 * but the RF-B Tx Power must be calculated by the antenna diff.
+	 * So we have to rewrite Antenna gain offset register here.
+	 * Please refer to BB register 0x80c
+	 * 1. For CCK.
+	 * 2. For OFDM 1T or 2T */
+	_rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0],
+			&ofdmpowerLevel[0]);
+
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			("Channel-%d, cckPowerLevel (A / B) = "
+			"0x%x / 0x%x,   ofdmPowerLevel (A / B) = 0x%x / 0x%x\n",
+			channel, cckpowerlevel[0], cckpowerlevel[1],
+			ofdmpowerLevel[0], ofdmpowerLevel[1]));
+
+	_rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0],
+			&ofdmpowerLevel[0]);
+
+	rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]);
+	rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel);
+
+}
+
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 pollingcnt = 10000;
+	u32 tmpvalue;
+
+	/* Make sure that CMD IO has be accepted by FW. */
+	do {
+		udelay(10);
+
+		tmpvalue = rtl_read_dword(rtlpriv, WFM5);
+		if (tmpvalue == 0)
+			break;
+	} while (--pollingcnt);
+
+	if (pollingcnt == 0)
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Set FW Cmd fail!!\n"));
+}
+
+
+static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 input, current_aid = 0;
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	/* We re-map RA related CMD IO to combinational ones */
+	/* if FW version is v.52 or later. */
+	switch (rtlhal->current_fwcmd_io) {
+	case FW_CMD_RA_REFRESH_N:
+		rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB;
+		break;
+	case FW_CMD_RA_REFRESH_BG:
+		rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB;
+		break;
+	default:
+		break;
+	}
+
+	switch (rtlhal->current_fwcmd_io) {
+	case FW_CMD_RA_RESET:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_RESET\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_ACTIVE:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_ACTIVE\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_N:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_N\n"));
+		input = FW_RA_REFRESH;
+		rtl_write_dword(rtlpriv, WFM5, input);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_BG:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_BG\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_N_COMB:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_N_COMB\n"));
+		input = FW_RA_IOT_N_COMB;
+		rtl_write_dword(rtlpriv, WFM5, input);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_RA_REFRESH_BG_COMB:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_RA_REFRESH_BG_COMB\n"));
+		input = FW_RA_IOT_BG_COMB;
+		rtl_write_dword(rtlpriv, WFM5, input);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_IQK_ENABLE:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_IQK_ENABLE\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_PAUSE_DM_BY_SCAN:
+		/* Lower initial gain */
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+		rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+		break;
+	case FW_CMD_RESUME_DM_BY_SCAN:
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+		rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+		break;
+	case FW_CMD_HIGH_PWR_DISABLE:
+		if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE)
+			break;
+
+		/* Lower initial gain */
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+		rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+		break;
+	case FW_CMD_HIGH_PWR_ENABLE:
+		if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+			(rtlpriv->dm.dynamic_txpower_enable == true))
+			break;
+
+		/* CCA threshold */
+		rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+		break;
+	case FW_CMD_LPS_ENTER:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_LPS_ENTER\n"));
+		current_aid = rtlpriv->mac80211.assoc_id;
+		rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER |
+				((current_aid | 0xc000) << 8)));
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		/* FW set TXOP disable here, so disable EDCA
+		 * turbo mode until driver leave LPS */
+		break;
+	case FW_CMD_LPS_LEAVE:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_LPS_LEAVE\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_ADD_A2_ENTRY:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+			 ("FW_CMD_ADD_A2_ENTRY\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+	case FW_CMD_CTRL_DM_BY_DRIVER:
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 ("FW_CMD_CTRL_DM_BY_DRIVER\n"));
+		rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER);
+		rtl92s_phy_chk_fwcmd_iodone(hw);
+		break;
+
+	default:
+		break;
+	}
+
+	rtl92s_phy_chk_fwcmd_iodone(hw);
+
+	/* Clear FW CMD operation flag. */
+	rtlhal->set_fwcmd_inprogress = false;
+}
+
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32	fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv);
+	u16	fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv);
+	bool bPostProcessing = false;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			("Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n",
+			fw_cmdio, rtlhal->set_fwcmd_inprogress));
+
+	do {
+		/* We re-map to combined FW CMD ones if firmware version */
+		/* is v.53 or later. */
+		switch (fw_cmdio) {
+		case FW_CMD_RA_REFRESH_N:
+			fw_cmdio = FW_CMD_RA_REFRESH_N_COMB;
+			break;
+		case FW_CMD_RA_REFRESH_BG:
+			fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB;
+			break;
+		default:
+			break;
+		}
+
+		/* If firmware version is v.62 or later,
+		 * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */
+		if (hal_get_firmwareversion(rtlpriv) >= 0x3E) {
+			if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER)
+				fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW;
+		}
+
+
+		/* We shall revise all FW Cmd IO into Reg0x364
+		 * DM map table in the future. */
+		switch (fw_cmdio) {
+		case FW_CMD_RA_INIT:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("RA init!!\n"));
+			fw_cmdmap |= FW_RA_INIT_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL);
+			break;
+		case FW_CMD_DIG_DISABLE:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Set DIG disable!!\n"));
+			fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_DIG_ENABLE:
+		case FW_CMD_DIG_RESUME:
+			if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) {
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					("Set DIG enable or resume!!\n"));
+				fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL);
+				FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			}
+			break;
+		case FW_CMD_DIG_HALT:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Set DIG halt!!\n"));
+			fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_TXPWR_TRACK_THERMAL: {
+			u8	thermalval = 0;
+			fw_cmdmap |= FW_PWR_TRK_CTL;
+
+			/* Clear FW parameter in terms of thermal parts. */
+			fw_param &= FW_PWR_TRK_PARAM_CLR;
+
+			thermalval = rtlpriv->dm.thermalvalue;
+			fw_param |= ((thermalval << 24) |
+				     (rtlefuse->thermalmeter[0] << 16));
+
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Set TxPwr tracking!! "
+				 "FwCmdMap(%#x), FwParam(%#x)\n",
+				 fw_cmdmap, fw_param));
+
+			FW_CMD_PARA_SET(rtlpriv, fw_param);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL);
+			}
+			break;
+		/* The following FW CMDs are only compatible to
+		 * v.53 or later. */
+		case FW_CMD_RA_REFRESH_N_COMB:
+			fw_cmdmap |= FW_RA_N_CTL;
+
+			/* Clear RA BG mode control. */
+			fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL);
+
+			/* Clear FW parameter in terms of RA parts. */
+			fw_param &= FW_RA_PARAM_CLR;
+
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("[FW CMD] [New Version] "
+				 "Set RA/IOT Comb in n mode!! FwCmdMap(%#x), "
+				 "FwParam(%#x)\n", fw_cmdmap, fw_param));
+
+			FW_CMD_PARA_SET(rtlpriv, fw_param);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL);
+			break;
+		case FW_CMD_RA_REFRESH_BG_COMB:
+			fw_cmdmap |= FW_RA_BG_CTL;
+
+			/* Clear RA n-mode control. */
+			fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL);
+			/* Clear FW parameter in terms of RA parts. */
+			fw_param &= FW_RA_PARAM_CLR;
+
+			FW_CMD_PARA_SET(rtlpriv, fw_param);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL);
+			break;
+		case FW_CMD_IQK_ENABLE:
+			fw_cmdmap |= FW_IQK_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			/* Clear control flag to sync with FW. */
+			FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL);
+			break;
+		/* The following FW CMD is compatible to v.62 or later.  */
+		case FW_CMD_CTRL_DM_BY_DRIVER_NEW:
+			fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		/*  The followed FW Cmds needs post-processing later. */
+		case FW_CMD_RESUME_DM_BY_SCAN:
+			fw_cmdmap |= (FW_DIG_ENABLE_CTL |
+				      FW_HIGH_PWR_ENABLE_CTL |
+				      FW_SS_CTL);
+
+			if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE ||
+				!digtable.dig_enable_flag)
+				fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+			if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+			    (rtlpriv->dm.dynamic_txpower_enable == true))
+				fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+
+			if ((digtable.dig_ext_port_stage ==
+			    DIG_EXT_PORT_STAGE_0) ||
+			    (digtable.dig_ext_port_stage ==
+			    DIG_EXT_PORT_STAGE_1))
+				fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			bPostProcessing = true;
+			break;
+		case FW_CMD_PAUSE_DM_BY_SCAN:
+			fw_cmdmap &= ~(FW_DIG_ENABLE_CTL |
+				       FW_HIGH_PWR_ENABLE_CTL |
+				       FW_SS_CTL);
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			bPostProcessing = true;
+			break;
+		case FW_CMD_HIGH_PWR_DISABLE:
+			fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			bPostProcessing = true;
+			break;
+		case FW_CMD_HIGH_PWR_ENABLE:
+			if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
+				(rtlpriv->dm.dynamic_txpower_enable != true)) {
+				fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
+					      FW_SS_CTL);
+				FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+				bPostProcessing = true;
+			}
+			break;
+		case FW_CMD_DIG_MODE_FA:
+			fw_cmdmap |= FW_FA_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_DIG_MODE_SS:
+			fw_cmdmap &= ~FW_FA_CTL;
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		case FW_CMD_PAPE_CONTROL:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("[FW CMD] Set PAPE Control\n"));
+			fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW;
+
+			FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+			break;
+		default:
+			/* Pass to original FW CMD processing callback
+			 * routine. */
+			bPostProcessing = true;
+			break;
+		}
+	} while (false);
+
+	/* We shall post processing these FW CMD if
+	 * variable bPostProcessing is set. */
+	if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) {
+		rtlhal->set_fwcmd_inprogress = true;
+		/* Update current FW Cmd for callback use. */
+		rtlhal->current_fwcmd_io = fw_cmdio;
+	} else {
+		return false;
+	}
+
+	_rtl92s_phy_set_fwcmd_io(hw);
+	return true;
+}
+
+static	void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32	delay = 100;
+	u8	regu1;
+
+	regu1 = rtl_read_byte(rtlpriv, 0x554);
+	while ((regu1 & BIT(5)) && (delay > 0)) {
+		regu1 = rtl_read_byte(rtlpriv, 0x554);
+		delay--;
+		/* We delay only 50us to prevent
+		 * being scheduled out. */
+		udelay(50);
+	}
+}
+
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	/* The way to be capable to switch clock request
+	 * when the PG setting does not support clock request.
+	 * This is the backdoor solution to switch clock
+	 * request before ASPM or D3. */
+	rtl_write_dword(rtlpriv, 0x540, 0x73c11);
+	rtl_write_dword(rtlpriv, 0x548, 0x2407c);
+
+	/* Switch EPHY parameter!!!! */
+	rtl_write_word(rtlpriv, 0x550, 0x1000);
+	rtl_write_byte(rtlpriv, 0x554, 0x20);
+	_rtl92s_phy_check_ephy_switchready(hw);
+
+	rtl_write_word(rtlpriv, 0x550, 0xa0eb);
+	rtl_write_byte(rtlpriv, 0x554, 0x3e);
+	_rtl92s_phy_check_ephy_switchready(hw);
+
+	rtl_write_word(rtlpriv, 0x550, 0xff80);
+	rtl_write_byte(rtlpriv, 0x554, 0x39);
+	_rtl92s_phy_check_ephy_switchready(hw);
+
+	/* Delay L1 enter time */
+	if (ppsc->support_aspm && !ppsc->support_backdoor)
+		rtl_write_byte(rtlpriv, 0x560, 0x40);
+	else
+		rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+}
+
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8));
+}

drivers/net/wireless/rtlwifi/rtl8192se/phy.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __RTL92S_PHY_H__
+#define __RTL92S_PHY_H__
+
+#define MAX_TXPWR_IDX_NMODE_92S		63
+#define MAX_DOZE_WAITING_TIMES_9x	64
+
+/* Channel switch:The size of
+ * command tables for switch channel */
+#define MAX_PRECMD_CNT			16
+#define MAX_RFDEPENDCMD_CNT		16
+#define MAX_POSTCMD_CNT			16
+
+#define RF90_PATH_MAX			4
+
+enum version_8192s {
+	VERSION_8192S_ACUT,
+	VERSION_8192S_BCUT,
+	VERSION_8192S_CCUT
+};
+
+enum swchnlcmd_id {
+	CMDID_END,
+	CMDID_SET_TXPOWEROWER_LEVEL,
+	CMDID_BBREGWRITE10,
+	CMDID_WRITEPORT_ULONG,
+	CMDID_WRITEPORT_USHORT,
+	CMDID_WRITEPORT_UCHAR,
+	CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+	enum swchnlcmd_id cmdid;
+	u32 para1;
+	u32 para2;
+	u32 msdelay;
+};
+
+enum baseband_config_type {
+	/* Radio Path A */
+	BASEBAND_CONFIG_PHY_REG = 0,
+	/* Radio Path B */
+	BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+#define hal_get_firmwareversion(rtlpriv) \
+	(((struct rt_firmware *)(rtlpriv->rtlhal.pfirmware))->firmwareversion)
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+			   u32 data);
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+			    u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw,	enum radio_path rfpath,
+			   u32 regaddr, u32 bitmask, u32 data);
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+			    enum nl80211_channel_type ch_type);
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw);
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				   enum rf_pwrstate rfpower_state);
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw);
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw);
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw);
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8	channel);
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fwcmd_io);
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw);
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 beaconinterval);
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) ;
+
+#endif
+